ioctls such as SIOCGIFADDR deal with AF_INET sockaddr addresses, but none of
the fields aside from the embedded IPv4 address are used. To keep the interface
more simple, we directly expose Inet4Addr get and set methods which enable use
of these ioctls with the Ifreq wrapper.
Change-Id: Ia8b6ab9730f852cb99f4152e334a59d395476d2f
Reviewed-on: https://go-review.googlesource.com/c/sys/+/343250
Trust: Matt Layher <mdlayher@gmail.com>
Run-TryBot: Matt Layher <mdlayher@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
This CL expands upon CL 340369 by exporting the Ifreq type along with methods
for setting and getting data to/from the ifreq union in a type-safe way.
ifreqData remains unexported as we can keep adding helpers similar to the
IoctlGetEthtoolDrvinfo to expose those operations in a less error-prone way.
A test is also added to verify interface index data using IoctlIfreq against
the modern rtnetlink API used by the standard library.
Change-Id: Ic6980cbcd3792cc341cd614061cce32fa1f851e7
Reviewed-on: https://go-review.googlesource.com/c/sys/+/340370
Trust: Matt Layher <mdlayher@gmail.com>
Run-TryBot: Matt Layher <mdlayher@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
ifreq is difficult to use in Go due to the union field in particular. This
situation is made worse due to the need to comply with Go's unsafe.Pointer
rules. This CL generates the raw ifreq type and also adds an ifreqData type
of the same size which is specialized for use with unsafe.Pointer.
We also replace the existing ifreqEthtool (which was not padded to the correct
size) with the new APIs and add a test to verify that IoctlGetEthtoolDrvinfo
functions properly by checking the name of the driver for each network interface.
Future uses of ifreq in package unix can expand upon this type with additional
getter and setter methods to deal with the unsafe casts to and from the union
byte array. We may also consider exporting ifreq and ifreqData if necessary.
Change-Id: Ibf73a10e774b4336815c674bb867bbb7ec1b9c71
Reviewed-on: https://go-review.googlesource.com/c/sys/+/340369
Run-TryBot: Matt Layher <mdlayher@gmail.com>
Trust: Matt Layher <mdlayher@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
The test introduced in CL 284352 breaks on several builders, either
with IoctlFileDedupeRange returning ENOTTY (as already seen for android
in the TryBot run) or returning EINVAL in the FileDedupeRange.Status
field. Both seem to indicate that the underlying filesystem doesn't
support deduplication, so skip the test in these cases.
Also rename the test to indicate the func it is testing.
Change-Id: I29553a5fc95f98335cb233f05d4c2dfb5640dc4c
Reviewed-on: https://go-review.googlesource.com/c/sys/+/295911
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matt Layher <mdlayher@gmail.com>
On some platforms (namely Linux), Select and Pselect update the
passed-in timeval/timespec, which might lead to failing tests in
case of an EINTR. Fix this by always resetting the timeval/timespec
before calling Select/Pselect.
Also change accept timeouts within 2/3 margin of the expected timeout,
like already done in TestSelect. While at it, fix the failure log to use
the common "got X, expected Y" message.
Fixesgolang/go#42210
Change-Id: Id0efbbecc9c0bf44c102d5d1880b1bae32980ad1
Reviewed-on: https://go-review.googlesource.com/c/sys/+/265020
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
openat2 is a new syscall added to Linux 5.6. It provides a superset of
openat(2) functionality, extending it with flags telling the kernel how
to resolve the paths.
For more info, see https://lwn.net/Articles/803237/
NOTE that this is a second attempt to add the call; the previous one
(https://golang.org/cl/227280) was reverted
(https://golang.org/cl/227846) due to the test case failure on ARM
(https://golang.org/issue/38357).
This CL has the test case reworked to be less assumptive to the testing
environment. In particular, it first tries if the most simplistic
openat2() call succeeds, and skips the test otherwise. It is done that
way because CI can be under under different kernels and in various
envrionments -- in particular, Docker+seccomp can result in EPERM from a
system call (which is not expected otherwise).
For previous discussions about the test case, see
https://golang.org/cl/227865.
Change-Id: I4276cf13dc29ecbdbdc9c58da0f76270f585a67f
Reviewed-on: https://go-review.googlesource.com/c/sys/+/253057
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
openat2 is a new syscall added to Linux 5.6. It provides a superset
of openat(2) functionality, providing a way to extend it in the future,
and (for now) adding flags telling the kernel how to resolve the path.
For more info on openat2, see https://lwn.net/Articles/803237/
A primitive test case is added to check that Openat2 works as
it should. Tested to skip on kernel 5.5 and pass on 5.6.
Change-Id: Ib8bbd71791762f043200543cecdea16d2fd3c81d
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Reviewed-on: https://go-review.googlesource.com/c/sys/+/227280
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Move TestUtimesNanoAt to syscall_unix_test.go. All BSDs and
solaris/illumos provide UtimesNanoAt. The implementations on linux and
darwin are already the same and the type conversions of Timespec members
on aix should no longer be necessary since CL 177838.
Change-Id: If0d03a92b3167da08191b6e98888eec92f27c3c9
Reviewed-on: https://go-review.googlesource.com/c/sys/+/213398
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When checking the old affinity mask with the fix introduced in CL
137675, the wrong CPU (5 instead of 1) is checked. Correct this and also
move the call to SchedGetaffinity closer to the SchedSetaffinity call in
order to reduce the time window for CPUs to go offline.
Updates golang/go#27875Fixesgolang/go#35184
Change-Id: Ie50320c82d1334aa26764281253dc9dde066a730
Reviewed-on: https://go-review.googlesource.com/c/sys/+/206863
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This tests the epoll functionality on linux and should hopefully help
catch GOARCHes where additional padding of EpollEvent is needed (see
e.g. CL 189877).
Change-Id: Icd19746a60a63016a5d46535a2cc557ca7a0d474
Reviewed-on: https://go-review.googlesource.com/c/sys/+/205398
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add Set, Clear, IsSet and Zero methods to manipulate an *FdSet. These
implement the same functionality as the FD_SET, FD_CLR, FD_ISSET and
FD_ZERO macros in <sys/select.h>.
Change-Id: I6b7bccb98e58ee5e719096ed5743f6edcd232840
Reviewed-on: https://go-review.googlesource.com/c/sys/+/205397
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add IoctlRetInt() for ioctls that use syscall's return value
as an output parameter. Add a unit test for Linux, and the
NS_GET_ defines that it requires (see ioctl_ns(2)).
Motivation:
Currently, x/sys/unix provides a few functions to deal with ioctls.
In particular, IoctlGetInt(), which "performs an ioctl operation
which gets an integer value". It does that by passing a pointer
to an integer to a syscall and returning that integer. The value
returned from syscall is treated as success/failure flag
(0 means success, -1 means failure, and in such case errno
is used to figure out the underlying error).
It appears that there are a few ioctls in Linux and at least one
in Solaris, which do not use the above way to return an int, instead
they use the syscall's return value (in case it's not negative).
As Linux ioctl(2) man page says,
> RETURN VALUE
> Usually, on success zero is returned. A few ioctl() requests
> use the return value as an output parameter and return
> a nonnegative value on success. On error, -1 is returned,
> and errno is set appropriately.
Currently I am aware of at least 6 Linux ioctls that do that
(return the value directly):
* LOOP_CTL_* ioctls on /dev/loop-control (all 3 of them). Source: loop(4)
* NS_* ioctls (3 out of 4) on /proc/PID/ns/*. Source: ioctl_ns(2)
And one in Solaris:
* I_FIND ioctl, source: streamio(7i).
There might be some more ioctls like the ones above, but since
ioctls are scarcely documented, it is hard to say how many more.
Obviously, using IoctlGetInt() for such ioctls would be a big
mistake, as 0 will always be returned. For example, there was
a bug in Docker's pkg/loopback (moby/moby#39801).
[v6: make it linux-specific for now]
Fixesgolang/go#33966
Change-Id: Ie64f72fd84101b955ba14519a357e06a66d685d0
Reviewed-on: https://go-review.googlesource.com/c/sys/+/192780
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Resolves a number of issues, except for the clen function being
unused on Linux, as that would require a larger refactor which
probably isn't strictly necessary.
$ staticcheck .
affinity_linux.go:94:8: const m3 is unused (U1000)
affinity_linux.go:95:8: const m4 is unused (U1000)
sendfile_test.go:41:2: the goroutine calls T.Fatal, which must be called in the same goroutine as the test (SA2002)
sendfile_test.go:47:6: this value of err is never used (SA4006)
syscall_linux_test.go:519:21: should use time.Since instead of time.Now().Sub (S1012)
syscall_linux_test.go:530:21: should use time.Since instead of time.Now().Sub (S1012)
syscall_test.go:66:2: this value of ts is never used (SA4006)
syscall_test.go:67:2: this value of ts is never used (SA4006)
syscall_unix.go:88:6: func clen is unused (U1000)
Change-Id: I2611b4559339cea758b5da27ea1f36fb8cc2df3f
Reviewed-on: https://go-review.googlesource.com/c/sys/+/188037
Run-TryBot: Matt Layher <mdlayher@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This adds wrappers around name_to_handle_at and open_by_handle_at.
Requires root (or CAP_DAC_READ_SEARCH, rather) to run tests, which at
least some of our builders have.
bradfitz@go:~/src/golang.org/x/sys/unix$ go test -c && sudo ./unix.test -test.run=OpenBy -test.v=true
=== RUN TestOpenByHandleAt
=== RUN TestOpenByHandleAt/clone=false
=== RUN TestOpenByHandleAt/clone=true
--- PASS: TestOpenByHandleAt (0.00s)
syscall_linux_test.go:546: mountID: 22, handle: size=8, type=1, bytes="\x9e\x1e\b\x00~\x8c\xe5\x9d"
--- PASS: TestOpenByHandleAt/clone=false (0.00s)
syscall_linux_test.go:568: opened fd 3
--- PASS: TestOpenByHandleAt/clone=true (0.00s)
syscall_linux_test.go:568: opened fd 3
PASS
Fixesgolang/go#30537
Change-Id: Ia48a8faab2fee665d88a16d81a3a0c1504b129ce
Reviewed-on: https://go-review.googlesource.com/c/sys/+/173357
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If a system has the ability to disable some cores, as on
ppc64 with the ppc64_cpu command, then TestSchedSetaffinity will
fail if the CPUset passed to Setaffinity includes one that has
been disabled.
This adds a check to use values from the oldMask, which are the valid
cores returned from Getaffinity, to pass to Setaffinity.
Fixesgolang/go#27875
Change-Id: I9656f41867afc18e0eaedc4bdef5f75e137a1fcd
Reviewed-on: https://go-review.googlesource.com/137675
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The Linux kernel faccessat system call does not take a flags parameter.
The flag parameter to the C library faccessat function is implemented in C.
The unix.Faccessat function takes a flags parameter. In older releases
we have passed the flags parameter to the kernel, which ignored it.
In CL 119495 we started returning an error if any flags were set.
That seems clearly better than ignoring them, but it turns out that some
code was using the flags. The code was previously subtly broken.
Now it is obviously broken. That is better, but we can do better still:
we can implement the flags as the C library does. That is what this CL does.
Change-Id: I02d4bb981ebd39eb35e47c6e5281f85eaea68016
Reviewed-on: https://go-review.googlesource.com/126516
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If the underlying filesystem doesn't support atime or was mounted with the
noatime mount option, TestUtimesNanoAt fails when comparing atime:
--- FAIL: TestUtimesNanoAt (0.00s)
syscall_linux_test.go:144: UtimesNanoAt: wrong atime: {1111 0}
syscall_linux_test.go:147: UtimesNanoAt: wrong mtime: {3333 0}
FAIL
FAIL golang.org/x/sys/unix 0.376s
Fix it by dropping the atime comparison, it's enough to verify UtimesNanoAt
working correctly by comparing mtime.
Fixesgolang/go#26034
Change-Id: Id868f9d4c6a856a99ae930a46bfe91bd64ca8570
Reviewed-on: https://go-review.googlesource.com/120562
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On some builders TestStatx occassionally fails when comparing atime
between Statx and Stat/Lstat.
--- FAIL: TestStatx (0.00s)
syscall_linux_test.go:365: Statx: returned stat atime does not match Lstat
Fix it by dropping the atime comparison, it's enough to verify Statx
working correctly by comparing ctime and mtime. Also, not all
filesystems support atime.
Change-Id: I7da68bd20b9b21274c4993aa2c4241395d2c933a
Reviewed-on: https://go-review.googlesource.com/114616
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The mkfifo syscall is disallowed on android and iOS. sched_setaffinity
is disallowed on android. Skip all tests which use them.
/usr/bin does not exist on android. Use /system/bin in TestGetwd
instead, like TestChdirAndGetwd in the os package.
Like linux, android does not support Fchmodat with flags != 0. Adjust
TestFchmodat accordingly.
TestDevices might stat some device files which are not accessible, skip
those.
iOS cannot exec subprocesses, thus skip TestPassFD.
Fixesgolang/go#25535
Change-Id: Ic764b9152f0a7b703ad4f47fdb1a9a5e94718154
Reviewed-on: https://go-review.googlesource.com/114395
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Now that Fchmodat is available on all Unices, move TestFchmodat to
syscall_unix_test.go and adjust it such that Fchmodat with
AT_SYMLINK_NOFOLLOW in flags is tested where supported.
Change-Id: I41ef5b874e36d84ed4866706dbba075c39aa00d4
Reviewed-on: https://go-review.googlesource.com/101615
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
