'go mod download' calls WriteGoMod once via modload.ListModules when
it loads the build list. This saves sums for go.mod files needed by
MVS, but the write occurs before any zip files are downloaded.
With this change, 'go mod download' calls WriteGoMod again (and thus,
modfetch.WriteGoSum) after downloading and verifying module zip files,
so the sums of the zip files will be saved, too.
Fixes#41341
Change-Id: I7d56754aa255256ed45fd93cb154c2e6ea5f45a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/254357
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
On darwin, we put read-only data in __TEXT segment on AMD64 in
exe (non-PIE) buildmode, and in __DATA on everywhere else. This
is not ideal: things in __DATA segment are not read-only, and
being mapped R/W may use more run-time resources.
In fact, newer darwin systems support a __DATA_CONST segment,
which the dynamic linker will map it read-only after applying
relocations. Use that.
Fixes#38830.
Change-Id: Ic281e6c6ca8ef5fec4bb7c5b71c50dd5393e78ae
Reviewed-on: https://go-review.googlesource.com/c/go/+/253919
Reviewed-by: Than McIntosh <thanm@google.com>
When -mod=readonly is set, Import will now allow imports from
replacements without explicit requirements. With -mod=mod, this would
add a new requirement but does not trigger a module lookup, so it's
determinisitic.
Before reporting an error for an unknown import with -mod=readonly,
check whether the import is valid. If there's a typo in the import,
that's more relevant.
For #40728
Change-Id: I05e138ff76ba3d0eb2e3010c15589fa363deb8d3
Reviewed-on: https://go-review.googlesource.com/c/go/+/253745
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Keep track of whether the -mod flag was set explicitly. When
-mod=readonly is the default, we'll want to adjust our error messages
if it's set explicitly.
Also, register the -mod, -modcacherw, and -modfile flags in functions
in internal/base instead of internal/work. 'go mod' commands that
don't load packages shouldn't depend on internal/work.
For #40728
Change-Id: I272aea9e19908ba37e151baac4ea8630e90f241f
Reviewed-on: https://go-review.googlesource.com/c/go/+/253744
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
In the deadcode pass, a type symbol may be marked twice, one
without UsedInIface, one with. For the second time, don't
update the Reachparent graph, so it only records the path of
the first time the symbol is reached. This ensures the
Reachparent graph is acyclic.
TODO: add a test. (This only affects GOEXPERIMENT=fieldtrack)
Change-Id: I68e8a1a69c3830bc8aee5df946151dc22dcb2b29
Reviewed-on: https://go-review.googlesource.com/c/go/+/254297
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
BenchmarkFullASCIIRune tests the performance of function utf8.FullRune,
which will be inlined in BenchmarkFullASCIIRune. Since the return value
of FullRune is not referenced, it will be removed as dead code.
This CL makes the FullRune functions return value referenced by a global
variable to avoid this point. In addition, this CL adds one more benchmark
to cover more code paths, and puts them together as sub benchmarks of
BenchmarkFullRune.
Change-Id: I6e79f4c087adf70e351498a4b58d7482dcd1ec4a
Reviewed-on: https://go-review.googlesource.com/c/go/+/233979
Run-TryBot: eric fang <eric.fang@arm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Enable VBSL, VBIT, VCMTST, VUXTL VUXTL2 and FMOVQ SIMD
instructions required by the issue #40725. And FMOVQ
instrucion is used to move a large constant to a Vn
register.
Add test cases.
Fixes#40725
Change-Id: I1cac1922a0a0165d698a4b73a41f7a5f0a0ad549
Reviewed-on: https://go-review.googlesource.com/c/go/+/249758
Reviewed-by: Cherry Zhang <cherryyz@google.com>
I found the control flow of this function a bit tricky to reason about
due to nesting and interaction between conditions and iteration. This
change factors out a helper function that can return early instead of
mixing conditionals and 'continue' statements.
Also remove the (unused) ModuleUsedDirectly function.
For #36460
Change-Id: I60a2a5a1b32989e5a17a14e1a8c858b280cda8f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/251998
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
With lazy loading, the “build list” can be refined as packages are loaded.
Rename functions that return the build list to more precisely describe
the set of modules returned by the call.
Also eliminate a redundant call to LoadBuildList (right before
ListModules, which itself begins with the same call).
For #36460
Change-Id: I0fc4f9dd7602e0df5e166e329ee5d516d810ca53
Reviewed-on: https://go-review.googlesource.com/c/go/+/249878
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
The new semantics of the "all" package pattern can be implemented
without actually changing module loading per se. This change
implements those semantics, so that the change can be decoupled from
the changes to the module requirement graph.
For #36460
Change-Id: I0ee8b17afa8b728dc470a42a540fcc01764a4442
Reviewed-on: https://go-review.googlesource.com/c/go/+/240623
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Due to a bug in CL 173017, if QueryPackages found multiple candidates
for the given package and *at least* one of those candidates was not
available to add, we would reject *all* such candidates — even those
that were still viable.
Now, we return the first viable candidate, and only return an error if
*no* candidate is viable given the current build list.
Fixes#41113
Change-Id: Idb2e77244be7c0f5dd511efb142c3059925d7336
Reviewed-on: https://go-review.googlesource.com/c/go/+/251446
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Fix a data race for clients that mutate requests after receiving a
response error which is caused by the writeLoop goroutine left
running, this can be seen on cancelled requests.
Fixes#37669
Change-Id: Ia4743c6b8abde3a7503de362cc6a3782e19e7f60
Reviewed-on: https://go-review.googlesource.com/c/go/+/251858
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
modload.Import previously performed two otherwise-separable tasks:
1. Identify which module in the build list contains the requested
package.
2. If no such module exists, search available modules to try to find
the missing package.
This change splits those two tasks into two separate unexported
functions, and reports import-resolution errors by attaching them to
the package rather than emitting them directly to stderr. That allows
'list' to report the errors, but 'list -e' to ignore them.
With the two tasks now separate, it will be easier to avoid the
overhead of resolving missing packages during lazy loading if we
discover that some existing dependency needs to be promoted to the top
level (potentially altering the main module's selected versions, and
thus suppling packages that were previously missing).
For #36460
Updates #26909
Change-Id: I32bd853b266d7cd231d1f45f92b0650d95c4bcbd
Reviewed-on: https://go-review.googlesource.com/c/go/+/251445
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
forceStdVendor was a special-case mechanism to allow Go contributors
to use vendored dependencies by default when working in GOROOT/src.
As of Go 1.14,¹ the 'go' command uses vendored dependencies by default
within all modules, so the 'std' and 'cmd' modules no longer need to
be special cases, and we can remove this special-case code.
¹ https://golang.org/doc/go1.14#vendor
Updates #33848
Updates #30241
Change-Id: Ib2fb5841c253113b17fa86a086ce85a22ac3d121
Reviewed-on: https://go-review.googlesource.com/c/go/+/251159
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
If the user requests the 'all' pattern in addition to explicit roots
outside of 'all', we should not load the transitive dependencies of
those explicit roots as if they were *in* 'all'. Without the '-test'
flag, we should not load test dependencies of any package outside of
'all'. Even *with* the '-test' flag, we should only load test
dependencies of the requested roots, not test dependencies of other
packages that happen to be imported by those roots.
More precise tracking of membership in 'all' will be important when we
implement lazy loading, because membership in 'all' determines which
module dependencies we will record in the main module's go.mod file.
This change also reduces reliance on global state, factors out the
loading process into several smaller functions, and sets us up to
reuse the 'go mod vendor' version of the 'all' pattern for lazy
loading.
For #36460Fixes#40799
Change-Id: I5ca21c86a860daee1316f732cea131a331d8ddf9
Reviewed-on: https://go-review.googlesource.com/c/go/+/240505
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
This avoids a deadlock on prof.signalLock between setcpuprofilerate
and cpuprof.add if a SIGPROF is delivered to the thread between the
call to setThreadCPUProfiler and acquiring prof.signalLock.
Fixes#41014
Change-Id: Ie825e8594f93a19fb1a6320ed640f4e631553596
Reviewed-on: https://go-review.googlesource.com/c/go/+/253758
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Both ReadMemStatsSlow and CheckScavengedBits iterate over the page
allocator's chunks but don't actually check if they exist. During the
development process the chunks index became sparse, so now this was a
possibility. If the runtime tests' heap is sparse we might end up
segfaulting in either one of these functions, though this will generally
be very rare.
The pattern here to return nil for a nonexistent chunk is also useful
elsewhere, so this change introduces tryChunkOf which won't throw, but
might return nil. It also updates the documentation of chunkOf.
Fixes#41296.
Change-Id: Id5ae0ca3234480de1724fdf2e3677eeedcf76fa0
Reviewed-on: https://go-review.googlesource.com/c/go/+/253777
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Pre-resolve package index references, so it doesn't need to do a
map lookup in every cross-package symbol reference resolution. It
increases the memory usage very slightly (O(# imported packages)).
Change-Id: Ia76c97ac51f1c2c2d5ea7ae34853850ec69ef0a8
Reviewed-on: https://go-review.googlesource.com/c/go/+/253604
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This preserves zip sums when 'go get' is run on a module that does not
have a package in the root directory. The zip must be fetched to
determine whether the package should be loaded, so we already load and
verify the sum.
Note that 'go mod tidy' may still remove these sums, since they
aren't needed to load packages.
Fixes#41103
Change-Id: I78f10a25f0392461fdc98518a7c92a38ee3233c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/251880
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Currently, the statement:
go g(uintptr(f()))
gets rewritten into:
tmp := f()
newproc(8, g, uintptr(tmp))
runtime.KeepAlive(tmp)
which doesn't guarantee that tmp is still alive by time the g call is
scheduled to run.
This CL fixes the issue, by wrapping g call in a closure:
go func(p unsafe.Pointer) {
g(uintptr(p))
}(f())
then this will be rewritten into:
tmp := f()
go func(p unsafe.Pointer) {
g(uintptr(p))
runtime.KeepAlive(p)
}(tmp)
runtime.KeepAlive(tmp) // superfluous, but harmless
So the unsafe.Pointer p will be kept alive at the time g call runs.
Updates #24491
Change-Id: Ic10821251cbb1b0073daec92b82a866c6ebaf567
Reviewed-on: https://go-review.googlesource.com/c/go/+/253457
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It appears the machoCalcStart function is meant to align the
segment, but it doesn't. Replace it with an actual alignment
calculation. Also, use the alignment from the configuration,
instead of hardcode.
With this fix we could enable DWARF combining on macOS ARM64.
Change-Id: I19ec771b77d752b83a54c53b6ee65af78a31b8ae
Reviewed-on: https://go-review.googlesource.com/c/go/+/253558
Reviewed-by: Than McIntosh <thanm@google.com>
In Mach-O DWARF combining, some code was written using reflection,
so it could support both 32-bit and 64-bit Mach-O files without
duplicating code. We no longer support 32-bit darwin platforms
now. 32-bit support can go. Rewrite it with direct field access,
for 64-bit only.
Change-Id: If1338c3cd37cecf603f4df0c6eb0c890eaebfe5f
Reviewed-on: https://go-review.googlesource.com/c/go/+/253557
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
On darwin, with external linking, the system linker produces STAB
(symbolic debugging) symbols in the binary's symbol table. These
include paths of the intermediate object files, like
<tmpdir>/go.o, which changes from run to run, making the build
non-reproducible.
Since we run dsymutil to produce debug info and combine them
back into the binary, we don't need those STAB symbols anymore.
Strip them after running dsymutil.
If DWARF is not enabled, we don't run dsymutil. We can pass
"-Wl,-S" to let the system linker not generate those symbols.
While here, also make it more consistent about DWARF combining.
Currently we only do DWARF combining on macOS/AMD64, when DWARF
is enabled. On ARM64, we run dsymutil, but then throw the result
away. This CL changes it to not run dsymutil (and strip) on
ARM64.
TODO: add a test. We don't do it here as it fails on some
(non-darwin) platforms.
Fixes#40979.
Change-Id: If770f7828cdb858857d6079e0585bf067f8f7a92
Reviewed-on: https://go-review.googlesource.com/c/go/+/250944
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The post-index offset of VLD[1-4]R instructions is decided by the
"size" field not "Q" field, the current assembler uses "Q" fileld
to check the correctness of post-index offset which is not correct.
This patch fixes it.
Fixes#40725
Change-Id: If1cde7f21c6b3ee0e491649eb567700bd1475c84
Reviewed-on: https://go-review.googlesource.com/c/go/+/249757
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The Value field of ast.BasicLit is a string field holding the literal
string. For CHARs and STRINGs, the BasicLit.Value literal includes
quotes, so to use the value in practise one will often need to Unquote
it.
Since this is a common gotcha (I've been bitten by this a few times),
document it, and suggest the use of the strconv.Unquote functions.
Fixes#39590
Change-Id: Ie3e13f5a2a71bb1b59e03bc5b3a16d8e2e7c01d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/244960
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
On Server.Shutdown, all idle connections are closed.
A caveat for new connections is that they are marked idle
after 5 seconds.
Previously new HTTP/2 connections were marked New, and after 5 seconds,
they would then become idle. With this change, we now mark HTTP/2
connections as Active to allow the proper shutdown sequence to occur.
Fixes#36946Fixes#39776
Change-Id: I31efbf64b9a2850ca544da797f86d7e1b3378e8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/240278
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates x/net/http2 to git rev 62affa334b73ec65ed44a326519ac12c421905e3
x/net/http2: reject HTTP/2 Content-Length headers containing a sign
https://go-review.googlesource.com/c/net/+/236098/ (fixes#39017)
also updates the vendored version of golang.org/x/net by running
go get golang.org/x/net@62affa334b73ec65ed44a326519ac12c421905e3
go mod tidy
go mod vendor
go generate -run bundle net/http
Change-Id: I7ecfdb7644574c44c3616e3b47664eefd4c926f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/253238
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Ensures that calling TempDir() in either of Cleanup or Benchmark
doesn't cause test failures which were previously caused by the
created directory having been deleted after the first run, yet
we prevented the recreation of the directory due to our selection
of concurrency primitive sync.Once. This change recreates the
temporary directory if it doesn't exist, regardless of how
many times Cleanup and Benchmark are invoked.
Fixes#41062
Change-Id: I925d9f7207d7c369a193d1e17da7a59a586244a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/251297
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The linker assumed macOS is AMD64 (and 386 in the past). It
passes darwin/amd64-specific flags to the external linker when
building for macOS. They don't work for ARM64-based macOS. So
only pass them on AMD64.
Disable DWARF combining for macOS ARM64 for now. The generated
binary doesn't run. (TODO: fix.)
For macOS ARM64 port. External linking now works.
Change-Id: Iab53bc48f4fadd9b91de8898b4b450ea442667a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/253019
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The current implementation stores the comparison pseudo-ops of arm64
conditional instructions (CSEL/CSEL0) in Aux, this patch modifies it
and stores it in AuxInt, which can avoid the allocation.
Change-Id: I0b69e51f63acd84c6878c6a59ccf6417501a8cfc
Reviewed-on: https://go-review.googlesource.com/c/go/+/252517
Run-TryBot: fannie zhang <Fannie.Zhang@arm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This defines a macro for the regabi GOEXPERIMENT when assembling
runtime assembly code.
In general, assembly code will be shielded from the calling convention
change, but there is a small amount of runtime assembly that is going
to have to change. By defining a macro, we can easily make the small
necessary changes. The other option is to use build tags, but that
would require duplicating nontrivial amounts of unaffected code,
leading to potential divergence issues. (And unlike Go code, assembly
code can't depend on the compiler optimizing away branches on a
feature constant.) We consider the macro preferable, especially since
this is expected to be temporary as we transition to the new calling
convention.
Updates #40724.
Change-Id: I73984065123968337ec10b47bb12c4a1cbc07dc5
Reviewed-on: https://go-review.googlesource.com/c/go/+/252258
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This is the "feature flag" for the register calling convention work
(though since this work is expected to extend over a few releases,
it's not version-prefixed). This will let us develop the register
calling convention on the main branch while maintaining an easy toggle
between the old and new ABIs.
Updates #40724.
Change-Id: I129c8d87d34e6fa0910b6fa43efb35b706021637
Reviewed-on: https://go-review.googlesource.com/c/go/+/252257
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The primary responsibility of declare() to associate a symbol (Sym) with
a declaration (Node), so "oldname" will work. Function literals are
anonymous, so their symbols does not need to be declared.
Passes toolstash-check.
Change-Id: I739b1054e3953e85fbd74a99148b9cfd7e5a57eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/249078
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
They are skipped while processing Func.Dcl anyway.
This CL does not pass toolstash-check, because it reduces the length
of Func.Dcl length, while that length is used to generate autotmp
variables name.
Change-Id: I408183e62ce6c34e5f04c89814ebb9570957e37b
Reviewed-on: https://go-review.googlesource.com/c/go/+/252418
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fixes the file server to reject requests of the form:
"Range": "bytes=--N"
where "-N" is a negative suffix-length as designated by the
grammar in RFC 7233 Section 2.1, "Byte-Ranges", which specifies
that suffix-length MUST be of the form 1*DIGIT aka a non-negative digit.
Thus requests such as:
"Range": "bytes=--2"
will be rejected with a "416 Range Not Satisfiable" response.
Fixes#40940
Change-Id: I3e89f8326c14af30d8bdb126998a50e02ba002d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/252497
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
While debugging #40771, I realized that the chatty printer should only
ever print to a single io.Writer (normally os.Stdout). The other
Writer implementations in the chain write to local buffers, but if we
wrote a test's output to a local buffer, then we did *not* write it to
stdout and we should not store it as the most recently logged test.
Because the chatty printer should only ever print to one place, it
shouldn't receive an io.Writer as an argument — rather, it shouldn't
be used at all for destinations other than the main output stream.
On the other hand, when we flush the output buffer to stdout in the
top-level flushToParent call, it is important that we not allow some
other test's output to intrude between the test summary header and the
remainder of the test's output. cmd/test2json doesn't know how to
parse such an intrusion, and it's confusing to humans too.
No test because I couldn't reproduce the user-reported error without
modifying the testing package. (This behavior seems to be very
sensitive to output size and/or goroutine scheduling.)
Fixes#40771
Updates #38458
Change-Id: Ic19bf1d535672b096ba1c8583a3b74aab6d6d766
Reviewed-on: https://go-review.googlesource.com/c/go/+/249026
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Process may crash becaues acquireLockRank and releaseLockRank may
be called in nosplit context. With optimizations and inlining
disabled, these functions won't get inlined or have their morestack
calls eliminated.
Nosplit is not strictly required for lockWithRank, unlockWithRank
and lockWithRankMayAcquire, just keep consistency with lockrank_on.go
here.
Fixes#40843
Change-Id: I5824119f98a1da66d767cdb9a60dffe768f13c81
GitHub-Last-Rev: 38fd3ccf6e
GitHub-Pull-Request: golang/go#40844
Reviewed-on: https://go-review.googlesource.com/c/go/+/248878
Reviewed-by: Dan Scales <danscales@google.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
cgo effectively prepends -I${SRCDIR} to the header include path of all
preambles it processes, so when an #include <> matches a header file
both in the source directory and also another include directory, the
local copy will be used in preference.
This behaviour is surprising but unfortunately also longstanding and
relied upon by packages in the wild, so the best we can do is to
document it.
Fixes#41059
Change-Id: If6d2818294b2bd94ea0fe5fd6ce77e54b3e167a6
Reviewed-on: https://go-review.googlesource.com/c/go/+/251758
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I decided to add package and module diagrams to the test cases to make
them easier to follow.
While adding those diagrams, I noticed some strong similarities among
a couple of the graphs, so I consolidated those cases (and deleted the
redundant tests).
For #36460
Change-Id: Id6cd04fc871379b83851c2d1af89ea9296a0f3e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/251997
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
That test tested that import paths with non-ASCII unicode paths
were allowed by the Go command. Remove this test case because
golang.org/cl/251878 removes that support.
Also rewrite a test case in TestRepoRootForImportPath in the test
for cmd/go/internal/get to reflect that unicode directory names are now
disallowed.
Updates #29101
Change-Id: I669e220facd04fc82ccd05dd08e8f1ff4d48b1fd
Reviewed-on: https://go-review.googlesource.com/c/go/+/252297
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Previously, if an example test invoked runtime.Goexit, it would
pass yet hang until a timeout, while regular tests that invoke
runtime.Goexit do fail. This change removes that inconsistent
behavior and makes such example tests fail, and panic with an
indication of having invoked runtime.Goexit.
Fixes#41084
Change-Id: I0ffa152204f2b1580f4d5d6961ba1ce6b13fc022
Reviewed-on: https://go-review.googlesource.com/c/go/+/251857
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The copy of CheckImportPath in path.go and the regular expression for github
repos in vcsPaths together allow import paths with unicode letters with import
paths. These all come from github repos with non-ASCII unicode letters
with paths in directories. This mainly shows up in GOPATH mode, but could
also show up in Module mode when getting a module in GOPROXY=direct mode.
We expect there to not be any significant affected users of this change--
an investingation of github repos that would produce import paths that
would comply with the copy CheckImportPaths that's being removed, but not
modload.CheckImportPaths only surfaced a handful of cases, all of which
seemed to be small test or demonstation repos. But this CL is being
submitted early in the cycle so that it can be backed out if need be.
Updates #29101
Change-Id: I719df4af5b318e1330e90d8a0bffe5bb8d816f4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/251878
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This pulls in golang.org/cl/250920 which rejects Windows shortnames as
path components in module.CheckImportPath (as is already done in
cmd/go/internal/get's copy of CheckImportPath). This will allow us to replace
the copy of CheckImportPath with the original.
This also pulls in golang.org/cl/250919 which rejects + in CheckPath and
CheckImportPath, and golang.org/cl/235597, which adds methods to the zip
package for gorelease, but shouldn't affect cmd.
This change also updates the cmd/go test case TestScript/mod_bad_filenames
to reflect that golang.org/x/mod/zip error messages now include filenames
for bad file names that can't be included in zip archives.
Updates #29101
Change-Id: I7f654325dc33b19bc9c6f77a56546747add5a47f
Reviewed-on: https://go-review.googlesource.com/c/go/+/251877
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Rather than probe and guess if sendfile will work inside ResponseWriter.ReadFrom(src),
this change fixes the underlying issue of starting to respond before src is readable
We'll no longer send a status OK if a header has not yet been written and reading
from src is destined to fail. This small change implicitly takes care of the need for
the server to sniff the response body to determine the Content-Type.
This allows splice to work on Linux when src is a socket or any non-regular file that's spliceable.
The extra read of 512 bytes may raise an objection, and that's fair, but
we're already swapping some syscall prep work for another and a read of
512 probably will not impact the overall performance. For shorter
bodies, there's likely less setup time. A little initial slop is not too
unusual in zero copy network code, and sometimes actually helps.
Fixes#40888
Change-Id: I4a8e2ad0ace1318bae66dae5671d06ea6d4838ed
GitHub-Last-Rev: 097364ea86
GitHub-Pull-Request: golang/go#40903
Reviewed-on: https://go-review.googlesource.com/c/go/+/249238
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
commit 72ec930fa7 added basic support for
relocations, but assumed that the symbol value would be 0, likely because
.debug_info always has address == 0 in the ELF section headers.
CL 195679 added further support for relocations, but explicitly encoded
the original assumption that section addresses would be 0.
This change removes that assumption: all relocations will now be
properly computed based on the target symbol value even when that symbol
is a section with a non-zero address.
Typically, sections that are part of a LOAD program segment have
non-zero addresses. For example, .debug_ranges relocations could be
relative to .text, which usually has an address > 0.
Fixes#40879
Change-Id: Ib0a616bb8b05d6c96d179b03ca33a10946fc5d59
GitHub-Last-Rev: 4200de7326
GitHub-Pull-Request: golang/go#41038
Reviewed-on: https://go-review.googlesource.com/c/go/+/250559
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Remove an extra int32-representable check when deciding to use an int32
constant as an immediate value.
Comment out a broken optimization that relies on MaxUint32 being
representable by a signed int32. It never triggers and when fixed, the
signedness of the auxint prevents other optimization passes from
handling it properly, thus causing segfaults in the runtime.
Remove a couple offset representable in 32-bits checks on 32-bit aux
vals.
toolstash-check clean
Change-Id: I148b53403fde523c90d692cb90e412460664b439
Reviewed-on: https://go-review.googlesource.com/c/go/+/230458
Reviewed-by: Keith Randall <khr@golang.org>
We currently use two fields to store the targets of branches.
Some phases use p.To.Val, some use p.Pcond. Rewrite so that
every branch instruction uses p.To.Val.
p.From.Val is also used in rare instances.
Introduce a Pool link for use by arm/arm64, instead of
repurposing Pcond.
This is a cleanup CL in preparation for some stack frame CLs.
Change-Id: If8239177e4b1ea2bccd0608eb39553d23210d405
Reviewed-on: https://go-review.googlesource.com/c/go/+/251437
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Also don't restart DWARF reading from beginning when we are testing
multiple entries.
Also reformat relocationTests slice to use indexed literals.
Change-Id: Ia5f17214483394d0ef033be516df61f0bdc521b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/251637
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
When zero or less, maxIdleTime and maxLifetime means unlimited.
Helper function shortestIdleTimeLocked must not return the
minimum of the two until both are verified to be greater
then zero.
Fixes#40841
Change-Id: I1130332baf4ad259cd90c10f4221f5def8510655
Reviewed-on: https://go-review.googlesource.com/c/go/+/248817
Reviewed-by: Daniel Theophanes <kardianos@gmail.com>
The order array was zero initialized by the compiler, but ends up being
overwritten by the runtime anyway.
So let the runtime takes full responsibility for initializing, save us
one instruction per select.
Fixes#40399
Change-Id: Iec1eca27ad7180d4fcb3cc9ef97348206b7fe6b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/251517
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The current command will run this entire set of tests, which takes a
noticeable amount of time. Contributors may wish to run only a subset of
these tests to save time/compute (e.g. when iterating on a CL that
failed tests in that subset). Listing file(s) as operands to the command
will run only those tests.
Change-Id: I1874c43681a594190bc40b61cee0b8d321be73f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/242997
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
This was fixed by CL 242084. Retroactively add some tests that would
have failed before the fix.
Also, remove some existing duplicate tests.
Change-Id: I95f7a215d4a9651ded6d739f89c574f33f573c60
Reviewed-on: https://go-review.googlesource.com/c/go/+/251397
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
There was some duplication of logic interpreting the implicit type of
an operand in assignableTo and convertUntyped. Factor out this logic to
a new 'implicitType' function, which returns the implicit type of an
untyped operand when used in a context where a target type is expected.
I believe this resolves some comments about code duplication. There is
other similar code in assignable, assignableTo, and convertUntypes, but
I found it to to be sufficiently semantically distinct to not warrant
factoring out.
Change-Id: I199298a2e58fcf05344318fca0226b460c57867d
Reviewed-on: https://go-review.googlesource.com/c/go/+/242084
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
cmd/go.TestScript/test_main_twice demonstrates a program that invokes
(*M).Run twice in a row. If we only restore os.Exit(0) in m.afterOnce,
we will fail to restore it after the second run and fail the test
process despite both runs passing.
Updates #29062
Updates #23129
Change-Id: Id22ec68f1708e4583c8dda14a8ba0efae7178b85
Reviewed-on: https://go-review.googlesource.com/c/go/+/251262
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We're using sort.SliceStable, so no need to keep track of indexes as well.
Use a more robust test for whether a node is a call.
Add a test that we're actually reordering comparisons. This test fails
without the alg.go changes in this CL because eqstring uses OCALLFUNC
instead of OCALL for its data comparisons.
Update #8606
Change-Id: Ieeec33434c72e3aa328deb11cc415cfda05632e2
Reviewed-on: https://go-review.googlesource.com/c/go/+/237921
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
We currently use two fields to store the targets of branches.
Some phases use p.To.Val, some use p.Pcond. Rewrite so that
every branch instruction uses p.To.Val.
p.From.Val is also used in rare instances.
Introduce a Pool link for use by arm/arm64, instead of
repurposing Pcond.
This is a cleanup CL in preparation for some stack frame CLs.
Change-Id: I9055bf0a1d986aff421e47951a1dedc301c846f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/243318
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
cgo parses GCC’s error messages to classify C identifiers referenced
from Go programs (are they integer constants? type names?). If GCC tries
to colorize its errors, cgo can’t figure out what GCC is saying. GCC
avoids escape sequences in this scenario by default, but the default
behavior can be overridden in at least two places:
- The user can set `CGO_COPTS=-fdiagnostics-color`.
- Whoever compiled GCC can configure GCC itself to always colorize
output.
The most reliable way to ensure that GCC doesn’t colorize output is to
append `-fdiagnostics-color=never` to the GCC command line; do so.
Fixes#40415
Change-Id: Id4bdf8d92fac8b038340b4264f726e8fe38875b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/248398
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This merges an lis + subf into subfic, and for 32b constants
lwa + subf into oris + ori + subf.
The carry bit is no longer used in code generation, therefore
I think we can clobber it as needed. Note, lowered borrow/carry
arithmetic is self-contained and thus is not affected.
A few extra rules are added to ensure early transformations to
SUBFCconst don't trip up earlier rules, fold constant operations,
or otherwise simplify lowering. Likewise, tests are added to
ensure all rules are hit. Generic constant folding catches
trivial cases, however some lowering rules insert arithmetic
which can introduce new opportunities (e.g BitLen or Slicemask).
I couldn't find a specific benchmark to demonstrate noteworthy
improvements, but this is generating subfic in many of the default
bent test binaries, so we are at least saving a little code space.
Change-Id: Iad7c6e5767eaa9dc24dc1c989bd1c8cfe1982012
Reviewed-on: https://go-review.googlesource.com/c/go/+/249461
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
This is a port of CL 244628, updated to move some existing regression
tests into the fixedbugs directory, and to use subtests. Also,
'TestFixed' is renamed to 'TestFixedBugs'.
Change-Id: I43aac3f75f2bd850567d08e8b008d91aeb717064
Reviewed-on: https://go-review.googlesource.com/c/go/+/247904
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Better still would be to avoid passing around module.Version instances
with invalid Version strings in the first place, so that any time we
see a module.Version we know that it is actually a version of a module
(and not a structurally-similar datum with something else tacked on to
one of the fields). But that's a bigger cleanup for which I don't
currently have enough bandwidth.
Fixes#41060
Change-Id: I32fba5619105cbf67dd03691064c82b8ebb3ce18
Reviewed-on: https://go-review.googlesource.com/c/go/+/250951
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
TestBenchmark is broken due to lack of a Config.Importer, but
unfortunately fails silently due to an unchecked error.
Fix the importer and check the error. Also improve the output to include
allocation stats.
Finally, don't run TestBenchmark on go/types by default. If the
benchmark is being used during a refactoring of go/types itself, results
for go/types will not be comparable.
Change-Id: Ib6bdb6807403b3ec99762f535e2496c94bd9b6e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/249517
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Add s390x support to the addressing modes pass. This significantly
reduces the number of rules we need to have to handle indexed
addressing modes on s390x.
There are some changes introduced with the new approach. Notably
pointer calculations of the form '(ADD x (ADDconst y [c]))' won't
get fully merged into address fields right now, the constant offset
will remain separate. That is a relatively minor issue though.
file before after Δ %
addr2line 4120904 4120960 +56 +0.001%
api 4944005 4948765 +4760 +0.096%
asm 4977431 4984335 +6904 +0.139%
buildid 2683760 2683504 -256 -0.010%
cgo 4557976 4558408 +432 +0.009%
compile 19103577 18916634 -186943 -0.979%
cover 4883694 4885054 +1360 +0.028%
dist 3545177 3553689 +8512 +0.240%
doc 3921766 3921518 -248 -0.006%
fix 3295254 3302182 +6928 +0.210%
link 6539222 6540286 +1064 +0.016%
nm 4105085 4107757 +2672 +0.065%
objdump 4546015 4545439 -576 -0.013%
pack 2416661 2415485 -1176 -0.049%
pprof 13267433 13265489 -1944 -0.015%
test2json 2762180 2761996 -184 -0.007%
trace 10145090 10135626 -9464 -0.093%
vet 6772946 6771738 -1208 -0.018%
total 106588176 106418865 -169311 -0.159%
Fixes#37891.
Change-Id: If60d51f31eb2806b011432a6519951b8668cb42f
Reviewed-on: https://go-review.googlesource.com/c/go/+/250958
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The AssignableTo API is specifically for non-constant values, but is
currently called by gopls for constant completions. Add a test to ensure
that we handle this edge case correctly.
Change-Id: I83115cbca2443a783df1c3090b5741260dffb78e
Reviewed-on: https://go-review.googlesource.com/c/go/+/250258
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The error returned by convertUntyped is 'cannot convert _ to _', which
can be misleading in contexts where an explicit conversion would be
allowed.
Arguably the error message from convertUntyped should just be 'cannot
use _ as _', as 'convert' has an explicit meaning within the spec.
Making that change caused a large number of test failures, so for now we
just fix this for assignments by interpreting the error.
For #22070
Change-Id: I4eed6f39d1a991e8df7e035ec301d28a05150eb5
Reviewed-on: https://go-review.googlesource.com/c/go/+/242083
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The intermediate SSA opcodes* are no longer generated during the
lowering pass. The shifting rules have been improved using ISEL.
Therefore, we can remove them and the rules which expand them.
* The removed opcodes are:
LoweredAdd64Carry
ADDconstForCarry
MaskIfNotCarry
FlagCarryClear
FlagCarrySet
Change-Id: I1ebe2726ed988f29ed4800c8f57b428f7a214cd0
Reviewed-on: https://go-review.googlesource.com/c/go/+/249462
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
This change rejects module paths that don't conform to
the new checkModulePathLax function, when loading a go.mod
file. The change uses the checkModulePathLax function instead of
CheckPath because there are still many users who are using
unpublished modules with unpublishable paths, and we don't
want to break them all.
Next, before this change, when go mod init is run in GOPATH,
it would try to use the location of the directory within GOPATH
to infer the module path. After this change, it will only use
that inferred module path if it conforms to module.CheckPath.
Change-Id: Idb36d1655cc76aae82671e87ba634609503ad1a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/211597
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
'go get' will now warn about retracted versions in the build list,
after updating go.mod. The warning instructs users to run
'go get module@latest' to upgrade or downgrade away from the retracted
version.
'go get' now allows users to explicitly request a specific retracted
version.
For #24031
Change-Id: I15fda918dc84258fb35b615dcd33b0f499481bd7
Reviewed-on: https://go-review.googlesource.com/c/go/+/228383
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The -retracted flag causes 'go list' to load information about
retracted module module versions.
When -retracted is used with -f or -json, the Retracted field is set
to a string containing the reason for the retraction on retracted
module versions. The string is based on comments on the retract
directive. This field is also populated when the -u flag is used.
When -retracted is used with -versions, retracted versions are shown.
Normally, they are omitted.
For #24031
Change-Id: Ic13d516eddffb1b8404e21034f78cecc9896d1b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/228382
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The go command now recognizes 'retract' directives in go.mod. A
retract directive may be used by a module author to indicate a
version should not be used. The go command will not automatically
upgrade to a retracted version. Retracted versions will not be
considered when resolving version queries like "latest" that don't
refer to a specific version.
Internally, when the go command resolves a version query, it will find
the highest release version (or pre-release if no release is
available), then it will load retractions from the go.mod file for
that version. Comments on retractions are treated as a rationale and
may appear in error messages. Retractions are only loaded when a query
is resolved, so this should have no impact on performance for most
builds, except when go.mod is incomplete.
For #24031
Change-Id: I17d643b9e03a3445676dbf1a5a351090c6ff6914
Reviewed-on: https://go-review.googlesource.com/c/go/+/228380
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Query and other functions now accept an "allowed" function that
returns an error (previously, the function returned a bool). If the
error is equivalent to ErrDisallowed, it indicates the version is
excluded (or, in a future CL, retracted). This provides predicates a
chance to explain why a version is not allowed.
When a query refers to a specific revision (by version, branch, tag,
or commit name), most callers will not use the Allowed predicate. This
allows commands like 'go list -m' and 'go mod download' to handle
disallowed versions when explicitly requested. 'go get' will reject
excluded versions though.
When a query does not refer to a specific revision (for example,
"latest"), disallowed versions will not be considered.
When an "allowed" predicate returns an error not equivalent to
ErrDisallowed, it may be ignored or returned, depending on the
case. This never happens for excluded versions, but it may happen for
retractions (in a future CL). This indicates a list of retractions
could not be loaded. This frequently happens when offline, and it
shouldn't cause a fatal or warning in most cases.
For #24031
Change-Id: I4df6fb6bd60e3e0259e5b3b4bf71a307b4b32298
Reviewed-on: https://go-review.googlesource.com/c/go/+/228379
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
cmd/internal/objabi/doc.go has comments decribing the (old)
object file format. But cmd/internal/objabi has nothing to do
with object files, and never did. Delete.
Move some comment to cmd/internal/goobj, where the (new) object
file format is actually defined, and update to reflect the
current status.
Change-Id: Ied96089df4be35e5d259a572ed60ee00f2cd0d1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/249958
Reviewed-by: Than McIntosh <thanm@google.com>
This CL applies strong aux typing to the remaining s390x rewrite
rules in preparation for strong aux typing becoming the default.
Passes toolstash-check on s390x.
Change-Id: Id585b0db492780737818024e1b22b4837435b525
Reviewed-on: https://go-review.googlesource.com/c/go/+/250558
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
JavaScript environments are quite unpredictable because bundlers add
mocks for compatibility and libraries can polute the global namespace.
Detect more of such situations:
- Add check that require("fs") returns an object.
- Fix check that require("fs") returns an non-empty object.
- Add check that "module" is defined.
Fixes#40730
Change-Id: I2ce65fc7db64bbbb0b60eec79a4cfe5c3fec99c0
Reviewed-on: https://go-review.googlesource.com/c/go/+/248758
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
CL 220905 added code to identify alternate transports that always error
by using http2erringRoundTripper. This does not work when the transport
is from another package, e.g., http2.erringRoundTripper.
Expose a new method that allow detection of such a RoundTripper.
Switch to an interface that is both a RoundTripper and can return the
underlying error.
Fixes#40213
Change-Id: I170739857ab9e99dffb5fa55c99b24b23c2f9c54
Reviewed-on: https://go-review.googlesource.com/c/go/+/243258
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In order to generate more accurate or informative error messages from
the type checker, it can be helpful to interpret error messages in
context. This is currently achieved in a number of ways:
+ Return a boolean value, and then reverse-engineer the error at the
callsite (as in representable->representableConst).
+ Return a value causing the error (as in Checker.missingMethod), and
add the error at the callsite.
+ Pass a "reason" string pointer to capture the error (as in
Checker.assignableTo), and add the error at the callsite.
+ Pass a "context" string pointer, and use this when writing errors in
the delegated method.
In all cases, it is the responsibility of whatever code calls
Checker.error* to set the operand mode to invalid.
These methods are used as appropriate, depending on whether multiple
errors are generated, whether additional context is needed, and whether
the mere presence of an error needs to be interpreted at the callsite.
However, this practice has some downsides: the plurality of error
handling techniques can be a barrier to readability and composability.
In this CL, we introduce Yet Another Pattern, with the hope that it can
replace some or all of the existing techniques: factor out side-effect
free functions that evaluate a single error, and add helpers for
recording this error in the Checker.
As a proof of concept this is done for Checker.representable and
Checker.convertUntyped. If the general pattern does not seem appropriate
for replacing some or all of the error-handling techniques listed above,
we should revert to an established technique.
Some internal error APIs are refactored to operate on an error, rather
than a types.Error, with internal error metadata extracted using
errors.As. This seemed to have negligible impact on performance, but we
should be careful about actually wrapping errors: I expect that many
users will expect err to be a types.Error.
Change-Id: Ic5c6edcdc02768cd84e04638fad648934bcf3c17
Reviewed-on: https://go-review.googlesource.com/c/go/+/242082
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fix a data race for clients that mutate requests after receiving a
response error which is caused by the writeLoop goroutine left
running, this can be seen on canceled requests.
Fixes#37669
Change-Id: I0e0e4fd63266326b32587d8596456760bf848b13
Reviewed-on: https://go-review.googlesource.com/c/go/+/232799
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Old behavior is still enabled because it doesn't hurt to leave
it in and existing users of this feature (there are dozens of
us!) will not be surprised. Adding this finer control allows
users to avoid writing ssa.html where they can't, shouldn't, or
just don't want to.
Example, both ways:
$ GOSSAFUNC="(*Reader).Reset" go test -c -o ./a compress/gzip
dumped SSA to bytes/ssa.html
dumped SSA to strings/ssa.html
dumped SSA to bufio/ssa.html
dumped SSA to compress/gzip/ssa.html
$ GOSSAFUNC="compress/gzip.(*Reader).Reset" go test -c -o ./a compress/gzip
dumped SSA to compress/gzip/ssa.html
Updates #40919.
Change-Id: I06b77c3c1d326372a32651570b5dd6e56dfb1d7f
Reviewed-on: https://go-review.googlesource.com/c/go/+/250340
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The StripPrefix wrapper strips a prefix string from the request's
URL.Path field, but doesn't touch the RawPath field. This leads to the
confusing situation when StripPrefix handles a request with URL.RawPath
populated (due to some escaped characters in the request path) and the
wrapped request's RawPath contains the prefix but Path does not.
This change modifies StripPrefix to strip the prefix from both Path and
RawPath. If there are escaped characters in the prefix part of the
request URL the stripped handler serves a 404 instead of invoking the
underlying handler with a mismatched Path/RawPath pair.
This is a backward incompatible change for a very small minority of
requests; I would be surprised if anyone is depending on this behavior,
but it is possible. If that's the case, we could make a more
conservative change where the RawPath is trimmed if possible, but when
the prefix contains escaped characters then we don't 404 but rather send
through the invalid Path/RawPath pair as before.
Fixes#24366
Change-Id: I7030b8c183a3dfce307bc0272bba9a18df4cfe08
Reviewed-on: https://go-review.googlesource.com/c/go/+/233637
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Previously, Readdirnames returned a *PathError on Windows and Plan 9,
but a *SyscallError on POSIX systems.
In contrast, similar methods (such as Stat) return a *PathError on all platforms.
Fixes#38923
Change-Id: I26395905b1e723933f07b792c7aeee7c335949cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/233917
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Right now we just prevent such types from being on the heap. This CL
makes it so they cannot appear on the stack either. The distinction
between heap and stack is pretty vague at the language level (e.g. it
is affected by -N), and we don't need the flexibility anyway.
Once go:notinheap types cannot be in either place, we don't need to
consider pointers to such types to be pointers, at least according to
the garbage collector and stack copying. (This is the big win of this
CL, in my opinion.)
The distinction between HasPointers and HasHeapPointer no longer
exists. There is only HasPointers.
This CL is cleanup before possible use of go:notinheap to fix#40954.
Update #13386
Change-Id: Ibd895aadf001c0385078a6d4809c3f374991231a
Reviewed-on: https://go-review.googlesource.com/c/go/+/249917
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
par.Work performs two different tasks: deduplicating work (a task
which overlaps with par.Cache), and executing limited active work in
parallel. It also requires the caller to re-invoke Do whenever the
workqueue transititions from empty to non-empty.
The new par.Queue only performs the second of those two tasks, and
presents a simpler API: it starts and stops its own goroutines as
needed (indicating its idle state via a channel), rather than
expecting the caller to drive the transitions explicitly.
For #36460
Change-Id: I5c38657dda63ab55718497467d05d41744ff59f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/247766
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously they were cached per mvsReqs instance. However, the
contents of the go.mod file of a given dependency version can only
vary if the 'replace' directives that apply to that version have
changed, and the only time we change 'replace' directives is in 'go
mod edit' (which does not care about the build list or MVS).
This not only simplifies the mvsReqs implementation, but also makes
more of the underlying logic independent of mvsReqs.
For #36460
Change-Id: Ieac20c2fcd56f64d847ac8a1b40f9361ece78663
Reviewed-on: https://go-review.googlesource.com/c/go/+/244774
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously, this cache was a member of the (ephemeral) modload.loader
struct. However, the Go language version for a given module version
does not vary based on the build list, the set of loaded packages, the
build tags in use, the meaning of the "all" pattern, or anything else
that can be configured for an instance of the package loader. The map
containing that information is therefore not appropriate as a field of
the (configurable, package-list-dependent) loader struct.
The Go language version mapping could, in theory, be read from the
go.mod file in the module cache (or replacement directory) every time
it is needed: this map is just a cache, and as such it belongs
alongside the other caches and indexes in the modload package, which
are currently found in modfile.go.
We may want to do the same sort of global caching for the mapping from
each module.Version to its list of direct requirements (which are
similarly idempotent), but for now that is left for a future change.
For #36460
For #36876
Change-Id: I90ac176ffea97f30c47d6540c3dfb874dc9cfa4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/244078
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Previously, we suppressed the module version annotation if the last
error in the stack was a *module.ModuleError, regardless of its path.
However, if the error is for a replacement module, that produces a
confusing error message: the error is attributed to the last module in
the error path, but actually originates in the replacement (which is
not otherwise indicated).
Now, we print both the original and the replacement modules when they
differ, which may add some unfortunate redundancy in the output but at
least doesn't drop the very relevant information about replacements.
Fixes#35039
Change-Id: I631a7398033602b1bd5656150a4fad4945a87ade
Reviewed-on: https://go-review.googlesource.com/c/go/+/247765
Reviewed-by: Jay Conrod <jayconrod@google.com>
When we print the stack from a BuildListError, we print the main
module first and the error last. That was the opposite of the order in
which in was stored in memory, leading to (arguably) more complex code
and (definitely) my own inability to reason about the contents of the
slice.
For now, it's still more convenient to construct the stack reversed,
so we do that and then reverse it before packing it into the error.
For #36460
Change-Id: I6312fb67b2ad9bf9b64071fe829854833208bad7
Reviewed-on: https://go-review.googlesource.com/c/go/+/244759
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously, when we encountered an excluded version in any module's
requirements, we would resolve it to the next higher version.
Unfortunately, the meaning of “the next higher version” can change
over time.
Moreover, users who use 'exclude' directives normally either already
require some higher version (using the 'exclude' directive to prune
out invalid requirements from some intermediate version), or already
require some lower version (using the 'exclude' directive to prevent
'go get -u' from upgrading to a known-bad version). In both of these
cases, resolving an upgrade for the excluded version is needless work
even in the best case: it adds work for the 'go' command when there is
already a perfectly usable selected version of the module in the
requirement graph.
Instead, we now interpret the 'exclude' directive as dropping all
references to the excluded version.
This implements the approach described in
https://golang.org/issue/36465#issuecomment-572694990.
Fixes#36465
Updates #36460
Change-Id: Ibf0187daced417b4cc23b97125826778658e4b0f
Reviewed-on: https://go-review.googlesource.com/c/go/+/244773
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This allows semver-based comparisons of the version without additional allocations.
Also comment on the reason for the loops that iterate over modFile instead.
(I was reading the vendor code in order to add the lazy-loading version check,
and this section was a bit unclear to me.)
For #36460
Change-Id: I11559d81ffb4eba0e4e10e6fa3c01990b11f9180
Reviewed-on: https://go-review.googlesource.com/c/go/+/240622
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Due to a typo, this test case was not actually exercising the bug
described in golang/go#33656. Update it to do so. Interestingly, the
comparison is now valid (as it should be) -- I suspect #33656 is
actually fixed.
Fixes#33656
Change-Id: If50a917f6477d8eb4f82f5a2a96bf5d9123ff0d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/241263
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
These exported functions are mostly trivial wrappers, but do make
certain assumptions about how the underlying Checker APIs can be called.
Add some simple tests.
Change-Id: I68e9ae875353c12d118ec961a6f3834385fbbb97
Reviewed-on: https://go-review.googlesource.com/c/go/+/241262
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
With this patch, opt pass can expose more obvious constant-folding
opportunites.
Example:
func test(i int) int {return (i+8)-(i+4)}
The previous version:
MOVD "".i(FP), R0
ADD $8, R0, R1
ADD $4, R0, R0
SUB R0, R1, R0
MOVD R0, "".~r1+8(FP)
RET (R30)
The optimized version:
MOVD $4, R0
MOVD R0, "".~r1+8(FP)
RET (R30)
This patch removes some existing reassociation rules, such as "x+(z-C)",
because the current generic rewrite rules will canonicalize "x-const"
to "x+(-const)", making "x+(z-C)" equal to "x+(z+(-C))".
This patch also adds test cases.
Change-Id: I857108ba0b5fcc18a879eeab38e2551bc4277797
Reviewed-on: https://go-review.googlesource.com/c/go/+/237137
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This patch adds the ARM6464Bitfield auxInt to auxIntType() and
returns its Go type as "arm64Bitfield" type, which is defined
as int16 type.
And the Go type of SymOff auxInt is int32, but some functions
(such as min(), areAdjacentOffsets() and read16/32/64(),etc.)
use SymOff as an input parameter and treat its type as int64,
this patch adds the type conversion for these rules.
Passes toolstash-check -all.
Change-Id: Ib234b48d0a97ef244dd37878e06b5825316dd782
Reviewed-on: https://go-review.googlesource.com/c/go/+/234378
Reviewed-by: Keith Randall <khr@golang.org>
Add a new conversion function to convert aux type to Op type.
Passes toolstash-check -all.
Change-Id: I25d649a5296f6f178d64320dfc5d291e0a597e24
Reviewed-on: https://go-review.googlesource.com/c/go/+/233739
Reviewed-by: Keith Randall <khr@golang.org>
Add a check code for checking whether the "c" value can be
represented as a signed 32 bit integer in some rules.
Passes toolstash-check -all.
Change-Id: I84e4431dc75945985695516d34565b841c8b53e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/233738
Reviewed-by: Keith Randall <khr@golang.org>
CL 249962 added wasm StorepNoWB implementation in assembly, it's now
like all other architectures. This CL adds a general test that the
second param of StorepNoWB must be force to escape.
Fixes#40975
Change-Id: I1eccc7e50a3ec742a1912d65f25b15f9f5ad9241
Reviewed-on: https://go-review.googlesource.com/c/go/+/249761
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Turns out if your failure is in a function with a name like "Reset()"
there will be a lot of hits on the same hashcode. Adding package sensitivity
solves this problem.
In additionm, it turned out that in the case that a logfile was specified
for the GOSSAHASH logging, that it was opened in create mode, which meant
that multiple compiler invocations would reset the file to zero length.
Opening in append mode works better; the automated harness
(github.com/dr2chase/gossahash) takes care of truncating the file before use.
Change-Id: I5601bc280faa94cbd507d302448831849db6c842
Reviewed-on: https://go-review.googlesource.com/c/go/+/246937
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The second argument of StorepNoWB must be forced to escape.
The current Go code does not explicitly enforce that property.
By implementing in assembly, and not using go:noescape, we
force the issue.
Test is in CL 249761. Issue #40975.
This CL is needed for CL 249917, which changes how go:notinheap
works and breaks the previous StorepNoWB wasm code.
I checked for other possible errors like this. This is the only
go:notinheap that isn't in the runtime itself.
Change-Id: I43400a806662655727c4a3baa8902b63bdc9fa57
Reviewed-on: https://go-review.googlesource.com/c/go/+/249962
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Current peFile.goarch looks for symbols like "_rt0_386_windows" to
determine GOARCH. But "_rt0_386_windows" is not present in executables
built with cgo.
Use pe.FileHeader.Machine instead. This should work with any Windows
executable, not just with Go built executable.
Fixes#39682
Change-Id: Ie0ffce664f4b8b8fed69b2ecc482425b042a38d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/240957
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
In
type T1 struct { t2 }
type t2 int
func (t2) M()
T1 has method M because it embeds t2, which has M. Classify
the example
func ExampleT1_M
with T1 instead of ignoring it, as is done currently. There is no
other way to provide an example for such a method, since its original
type is unexported.
Continue to ignore examples on methods from embedded types that are
exported, unless in AllMethods mode. Examples for those methods could
be written on the original type.
The change involves removing a check in classifyExamples. The check
isn't necessary to get the above behavior because
reader.collectEmbeddedMethods and sortedFuncs already generate the
appropriate list of methods.
For #40172.
Change-Id: Ibe7d965ecba6426466184e6e6655fc05989e9caf
Reviewed-on: https://go-review.googlesource.com/c/go/+/249557
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
checkptr has code to recognize &^ expressions, but it didn't take into
account that "p &^ x" gets rewritten to "p & ^x" during walk, which
resulted in false positive diagnostics.
This CL changes walkexpr to mark OANDNOT expressions with Implicit
when they're rewritten to OAND, so that walkCheckPtrArithmetic can
still recognize them later.
It would be slightly more idiomatic to instead mark the OBITNOT
expression as Implicit (as it's a compiler-generated Node), but the
OBITNOT expression might get constant folded. It's not worth the extra
complexity/subtlety of relying on n.Right.Orig, so we set Implicit on
the OAND node instead.
To atone for this transgression, I add documentation for nodeImplicit.
Fixes#40917.
Change-Id: I386304171ad299c530e151e5924f179e9a5fd5b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/249477
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The optimization that replaces inline markers with pre-existing
instructions assumes that 'Prog' values produced by the compiler are
still reachable after the assembler has run. This was not true on
s390x where the assembler was removing NOP instructions from the
linked list of 'Prog' values. This led to broken inlining data
which in turn caused an infinite loop in the runtime traceback code.
Fix this by stopping the s390x assembler backend removing NOP
values. It does not make any difference to the output of the
assembler because NOP instructions are 0 bytes long anyway.
Fixes#40473.
Change-Id: I9b97c494afaae2d5ed6bca4cd428b4132b5f8133
Reviewed-on: https://go-review.googlesource.com/c/go/+/249448
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change does context propagation (and only context propagation)
necessary to add context to modfetch.Download and pkg.LoadImport.
This was done by adding context to their callers, and then
adding context to all call-sites, and then repeating adding
context to callers of those enclosing functions and their
callers until none were left. In some cases the call graph expansion
was pruned by using context.TODOs.
The next CL will add a span to Download. I kept it out of this
change to avoid making it any larger (and harder to review)
than it needs to be.
Updates #38714
Change-Id: I7a03416e04a14ca71636d96f2c1bda2c4c30d348
Reviewed-on: https://go-review.googlesource.com/c/go/+/249021
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Opening the html writer can fail, and the failure printer wants
to use the entry block's line number. So make sure we set up
the entry block first.
Fixes#40919
Change-Id: I4ffa2839b45a721bbaf04ff84418e8108fa1cc37
Reviewed-on: https://go-review.googlesource.com/c/go/+/249497
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
par.Work is used in a number of places as a parallel
work queue. This change replaces it with goroutines
and channels in a number of simpler places where it's
used.
This is the same CL as golang.org/cl/240062 and golang.org/cl/248326
except for the following changes in convert.go (all line numbers
from this CL), as well as fixing up imports in download.go:
- On line 44, the "*" before modules.Versions is removed (we were
trying to assign to a nil value on lines 72 and 73).
- Line 64 is new, and ensures that we receive on the semaphore
channel once the goroutine function exits. (The previous versions
of this CL only received at the end of the function, ignoring
the return point in the branch in the middle of the function.)
- The semaphore channel receive right before line 74 is gone,
replaced with the deferred receive above.
- The if block at line 83 is new, accounting for cases where
modfetch.ImportRepoRev returned an error in the goroutine,
so that versions[i] is ignored.
Change-Id: I0e33670bb2eb0a1e4d7a5fa693a471e61ffbc8b7
Reviewed-on: https://go-review.googlesource.com/c/go/+/249020
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously, on Unix systems, when the profiler was enabled or disabled,
we called setitimer once per thread. With this change we instead call
it once per process.
Change-Id: I90f0189b562e11232816390dc7d55ed154bd836d
Reviewed-on: https://go-review.googlesource.com/c/go/+/240003
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
People sometimes expect Join to trim .. components from its arguments
before joining, and are surprised that it doesn't. This is bad if they
were relying on that assumed behaviour to prevent directory traversal
attacks.
While a careful reading of the documentation for Join and Clean
might dispel this notion, it is not obvious at first glance.
Add a case to the examples to nudge people in the right direction.
Updates #40373
Change-Id: Ib5792c12ba1000811a0c0eb77048196d0b26da60
Reviewed-on: https://go-review.googlesource.com/c/go/+/249177
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Add a new lowering rule to match and replace such instances
with the MADDLD instruction available on power9 where
possible.
Likewise, this plumbs in a new ppc64 ssa opcode to house
the newly generated MADDLD instructions.
When testing ed25519, this reduced binary size by 936B.
Similarly, MADDLD combination occcurs in a few other less
obvious cases such as division by constant.
Testing of golang.org/x/crypto/ed25519 shows non-trivial
speedup during keygeneration:
name old time/op new time/op delta
KeyGeneration 65.2µs ± 0% 63.1µs ± 0% -3.19%
Signing 64.3µs ± 0% 64.4µs ± 0% +0.16%
Verification 147µs ± 0% 147µs ± 0% +0.11%
Similarly, this test binary has shrunk by 66488B.
Change-Id: I077aeda7943119b41f07e4e62e44a648f16e4ad0
Reviewed-on: https://go-review.googlesource.com/c/go/+/248723
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Remove some unnecessary code. Most significantly, we can skip testing
"if ch == nil { block() }", because this is already the semantics
implied by normal send/receive operations.
Updates #40410.
Change-Id: I4acd33383cc876719fc3b998d85244d4ac1ff9d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/245126
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Currently, we include a "kind" field on scase to distinguish the three
kinds of cases in a select statement: sends, receives, and defaults.
This commit removes by kind field by instead arranging for the
compiler to always place sends before receives, and to provide their
counts separately. It also passes an explicit "block bool" parameter
to avoid needing to include a default case in the array.
It's safe to shuffle cases like this because the runtime will
randomize the order they're polled in anyway.
Fixes#40410.
Change-Id: Iaeaed4cf7bddd576d78f2c863bd91a03a5c82df2
Reviewed-on: https://go-review.googlesource.com/c/go/+/245125
Reviewed-by: Keith Randall <khr@golang.org>
Per-case PCs are only needed for race detector builds, so this allows
skipping allocating stack space for them for non-race builds.
It's possible to arrange the PCs and order arrays consecutively in
memory so that we could just reuse the order0 pointer to identify
both. However, there's more risk of that silently going wrong, so this
commit passes them as separate arguments for now. We can revisit this
in the future.
Updates #40410.
Change-Id: I8468bc25749e559891cb0cb007d1cc4a40fdd0f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/245124
Reviewed-by: Keith Randall <khr@golang.org>
Currently, selectgo does an initial pass over the cases array to look
for entries with nil channels, so they can be easily recognized and
skipped later on. But this still involves actually visiting the cases.
This commit changes selectgo to omit cases with nil channels when
constructing pollorder, so that they'll be skipped over entirely later
on. It also checks for caseDefault up front, which will facilitate
changing it to use a "block bool" parameter instead.
Updates #40410.
Change-Id: Icaebcb8f08df03cc33b6d8087616fb5585f7fedd
Reviewed-on: https://go-review.googlesource.com/c/go/+/245123
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
selectgo will report at most one block event, so there's no need to
keep a releasetime for every select case. It suffices to simply track
the releasetime of the case responsible for the wakeup.
Updates #40410.
Change-Id: I72679cd43dde80d7e6dbab21a78952a4372d1e79
Reviewed-on: https://go-review.googlesource.com/c/go/+/245122
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The current wakeup protocol for channel communications is that the
second goroutine sets gp.param to the sudog when a value is
successfully communicated over the channel, and to nil when the wakeup
is due to closing the channel.
Setting nil to indicate channel closure works okay for chansend and
chanrecv, because they're only communicating with one channel, so they
know it must be the channel that was closed. However, it means
selectgo has to re-poll all of the channels to figure out which one
was closed.
This commit adds a "success" field to sudog, and changes the wakeup
protocol to always set gp.param to sg, and to use sg.success to
indicate successful communication vs channel closure.
While here, this also reorganizes the chansend code slightly so that
the sudog is still released to the pool if the send blocks and then is
awoken because the channel closed.
Updates #40410.
Change-Id: I6cd9a20ebf9febe370a15af1b8afe24c5539efc6
Reviewed-on: https://go-review.googlesource.com/c/go/+/245019
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Replace strings.Split by strings.IndexByte and explicit
slicing to avoid the allocation of the return slice
of strings.Split.
name old time/op new time/op delta
Marshal 43.3µs ± 1% 36.7µs ± 1% -15.23% (p=0.000 n=9+9)
name old alloc/op new alloc/op delta
Marshal 10.7kB ± 0% 9.2kB ± 0% -13.96% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
Marshal 444 ± 0% 366 ± 0% -17.57% (p=0.000 n=10+10)
Change-Id: I9e727defa23f7e5fc684f246de0136fe28cf8d25
Reviewed-on: https://go-review.googlesource.com/c/go/+/231738
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We could instead fix cmd/test2json to treat PAUSE lines as *not*
changing the active test name, but that seems like it would be more
confusing to humans, and also wouldn't fix tools that parse output
using existing builds of cmd/test2json.
Fixes#40657
Change-Id: I937611778f5b1e7dd1d6e9f44424d7e725a589ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/248727
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jean de Klerk <deklerk@google.com>
There were two places where the -short flag was added in order to
speed up tests when run in short mode, in CL 178399 and CL 177417.
It appears viable to re-use the GO_TEST_SHORT value so that -short
flag is not used when the tests are executed on a longtest builder,
where it is not a goal to skip slow tests for improved performance.
Do so, in order to make the testing configurations simpler and more
predictable.
Factor out the flag name out of the string returned by short, so that
it can be used in context of 'go test' which can accept a -short flag,
and a test binary which requires the use of a longer -test.short flag.
For #39054.
For #29252.
Change-Id: I52dfbef73cc8307735c52e2ebaa609305fb05933
Reviewed-on: https://go-review.googlesource.com/c/go/+/233898
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When external linking, for large binaries, the external linker
may insert a trampoline for the write barrier call, which looks
0000000005a98cc8 <__long_branch_runtime.gcWriteBarrier>:
5a98cc8: 86 01 82 3d addis r12,r2,390
5a98ccc: d8 bd 8c e9 ld r12,-16936(r12)
5a98cd0: a6 03 89 7d mtctr r12
5a98cd4: 20 04 80 4e bctr
It clobbers R12 (and CTR, which is never live across a call).
As at compile time we don't know whether the binary is big and
what link mode will be used, I think we need to mark R12 as
clobbered for write barrier call. For extra safety (future-proof)
we mark caller-saved register that cannot be used for function
arguments, which includes R11, as potentially clobbered as well.
Fixes#40851.
Change-Id: Iedd901c5072f1127cc59b0a48cfeb4aaec81b519
Reviewed-on: https://go-review.googlesource.com/c/go/+/248917
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This reverts the following changes:
• cmd/go: add tracing for querying and downloading from the proxy
CL 242786, commit 1a35583418
• cmd/go: do context propagation for tracing downloads
CL 248327, commit c0cf190d22
• cmd/go/internal: remove some users of par.Work
CL 248326, commit f30044a03b
Reason for revert: broke linux 386 and amd64 longtest builders.
The problem started with CL 248326, but CL 248327 and CL 242786
are reverted as well due to conflicts.
Updates #38714.
Fixes#40861.
Change-Id: I68496b4e5a27e47a42183553c3a645b288edac83
Reviewed-on: https://go-review.googlesource.com/c/go/+/249017
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Carlos Amedee <carlos@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some of the existing optimizations aren't triggered because they
are handled by the generic rules so this CL removes them. Also
some constraints were copied without much thought from the amd64
rules and they don't make sense on s390x, so we remove those
constraints.
Finally, add a 'multiply by the sum of two powers of two'
optimization. This makes sense on s390x as shifts are low latency
and can also sometimes be optimized further (especially if we add
support for RISBG instructions).
name old time/op new time/op delta
IntMulByConst/3-8 1.70ns ±11% 1.10ns ± 5% -35.26% (p=0.000 n=10+10)
IntMulByConst/5-8 1.64ns ± 7% 1.10ns ± 4% -32.94% (p=0.000 n=10+9)
IntMulByConst/12-8 1.65ns ± 6% 1.20ns ± 4% -27.16% (p=0.000 n=10+9)
IntMulByConst/120-8 1.66ns ± 4% 1.22ns ±13% -26.43% (p=0.000 n=10+10)
IntMulByConst/-120-8 1.65ns ± 7% 1.19ns ± 4% -28.06% (p=0.000 n=9+10)
IntMulByConst/65537-8 0.86ns ± 9% 1.12ns ±12% +30.41% (p=0.000 n=10+10)
IntMulByConst/65538-8 1.65ns ± 5% 1.23ns ± 5% -25.11% (p=0.000 n=10+10)
Change-Id: Ib196e6bff1e97febfd266134d0a2b2a62897989f
Reviewed-on: https://go-review.googlesource.com/c/go/+/248937
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For an unsigned integer, it's useful to convert its order test with 0/1
to its equality test with 0. We can save a comparison instruction that
followed by a conditional branch on arm64 since it supports
compare-with-zero-and-branch instructions. For example,
if x > 0 { ... } else { ... }
the original version:
CMP $0, R0
BLS 9
the optimized version:
CBZ R0, 8
Updates #21439
Change-Id: Id1de6f865f6aa72c5d45b29f7894818857288425
Reviewed-on: https://go-review.googlesource.com/c/go/+/246857
Reviewed-by: Keith Randall <khr@golang.org>
Corrects ErrReader's signature to what was accepted in the approved
proposal, and also removes an exported ErrIO which wasn't part of
the proposal and is unnecessary.
The new signature allows users to customize their own errors.
While here, started examples, with ErrReader leading the way.
Updates #38781
Change-Id: Ia7f84721f11061343cfef8b1adc2b7b69bc3f43c
Reviewed-on: https://go-review.googlesource.com/c/go/+/248898
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If the AND has other uses, we end up saving an argument to the AND
in another register, so we can use it for the TEST. No point in doing that.
Change-Id: I73444a6aeddd6f55e2328ce04d77c3e6cf4a83e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/241280
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I noticed that there is a Todo comment here. This variable is only used for filename when dump a function's ssa passes result in details. It is no problem to print a function alone, but may be edited by not only one goroutine if dump multiple functions at the same time. Although it looks only dump one function's ssa passes now. As far as I am concerned this variable can be a member variable of the struct Func. I'm not sure if this change is necessary. Looking forward to your advices, thank you very much.
Change-Id: I35dd7247889e0cc7f19c0b400b597206592dee75
Reviewed-on: https://go-review.googlesource.com/c/go/+/244918
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
There are some architecture-independent rules in #21439, since an
unsigned integer >= 0 is always true and < 0 is always false. This CL
adds these optimizations to generic rules.
Updates #21439
Change-Id: Iec7e3040b761ecb1e60908f764815fdd9bc62495
Reviewed-on: https://go-review.googlesource.com/c/go/+/246617
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change does context propagation (and only context propagation)
necessary to add context to modfetch.Download and pkg.LoadImport.
This was done by adding context to their callers, and then
adding context to all call-sites, and then repeating adding
context to callers of those enclosing functions and their
callers until none were left. In some cases the call graph expansion
was pruned by using context.TODOs.
The next CL will add a span to Download. I kept it out of this
change to avoid making it any larger (and harder to review)
than it needs to be.
Updates #38714
Change-Id: I5bf2d599aafef67334c384dfccd5e255198c85b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/248327
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
If we are parsing a test output, and the test does not end in the
usual PASS or FAIL line (say, because it panicked), then we need the
exit status of the test binary in order to determine whether the test
passed or failed. If we don't have that status available, we shouldn't
guess arbitrarily — instead, we should omit the final "pass" or "fail"
action entirely.
(In practice, we nearly always DO have the final status, such as when
running 'go test' or 'go tool test2json some.exe'.)
Fixes#40132
Change-Id: Iae482577361a6033395fe4a05d746b980e18c3de
Reviewed-on: https://go-review.googlesource.com/c/go/+/248624
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
par.Work is used in a number of places as a parallel
work queue. This change replaces it with goroutines
and channels in a number of simpler places where it's
used.
Change-Id: I0620eda46ec7b2c0599a8b9361639af7bb73a05a
Reviewed-on: https://go-review.googlesource.com/c/go/+/248326
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This change adds context, and a span to modload.LoadBuildList and
propagates context into modload.BuildList. It's the start
of a run of CLs to add trace spans for module operations.
Updates #38714
Change-Id: I0d58dd394051526338092dc9a5ec29a9e087e4e4
Reviewed-on: https://go-review.googlesource.com/c/go/+/248325
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
These commands are build-like commands that do their own flag
processing, so the value of debug-trace isn't available until
the command starts running. Start tracing in the cmd's run
function.
Updates #38714
Change-Id: I4d633e6ee907bf09feac52c2aff3daceb9b20e12
Reviewed-on: https://go-review.googlesource.com/c/go/+/248324
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This could help make it easier to identify blocking
dependencies when examining traces. Flows can be turned
off when viewing traces to remove potential distractions.
Updates #38714
Change-Id: Ibfd3f1a1861e3cac31addb053a2fca7ee796c4d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/248322
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Action.Func is now a func(*Builder, context.Context, *Action), so that
contexts can be propagated into the action funcs. While context
is traditionally the first parameter of a function, it's the second
parameter of Action.Func's type to continue to allow for methods
on Builder to be used as functions taking a *Builder as the first
parameter. context.Context is instead the first parameter on
those functions.
Change-Id: I5f058d6a99a1e96fe2025f2e8ce30a033d12e935
Reviewed-on: https://go-review.googlesource.com/c/go/+/248321
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This change adds a trace event for each action and also
annotates each of the action execution goroutines with trace.Goroutine
so that the actions eaxecuted by each goroutine appear on different threads in
the chrome trace viewer.
Updates #38714
Change-Id: I2e58dc5606b2e3f7f87076a61e1cc6a2014255c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/248320
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
trace.StartGoroutine will associate the trace information on the context
with a new chrome profiler thread id. The chrome profiler doesn't
expect multiple trace events to have the same thread id, so this
will allow us to display concurrent events on the trace.
Updates #38714
Change-Id: I888b0cce15a5a01db66366716fdd85bf86c832cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/248319
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
On ARM, for a JMP/CALL relocation, the instruction bytes is
encoded in Reloc.Add (issue #19811). I really hate it, but before
it is fixed we have to follow the rule and emit the right bits
from r.Add.
Fixes#40769.
Change-Id: I862e105408d344c5cc58ca9140d2e552e4364453
Reviewed-on: https://go-review.googlesource.com/c/go/+/248399
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
Reviewed-by: Than McIntosh <thanm@google.com>
cgo_import_dynamic pragma indicates a symbol is imported from a
dynamic library. Currently, the linker does not actually link
against the dynamic library, so we have to "force" it by using
//go:cgo_import_dynamic _ _ "dylib"
syntax, which links in the library unconditionally.
This CL changes it to link in the library automatically when a
symbol is imported from the library, without using the "force"
syntax. (The "force" syntax is still supported.)
Remove the unconditional imports in the runtime. Now,
Security.framework and CoreFoundation.framework are only linked
when the x509 package is imported (or otherwise specified).
Fixes#40727.
Change-Id: Ied36b1f621cdcc5dc4a8f497cdf1c554a182d0e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/248333
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, the GC stores the object marks for checkmarks mode in the
heap bitmap using a rather complex encoding: for one word objects, the
checkmark is stored in the pointer/scalar bit since one word objects
must be pointers; for larger objects, the checkmark is stored in what
would be the scan/dead bit for the second word of the object. This
encoding made more sense when the runtime used the first scan/dead bit
as the regular mark bit, but we moved away from that long ago.
This encoding and overloading of the heap bitmap bits causes a great
deal of complexity in many parts of the allocator and garbage
collector and leads to some subtle bugs like #15903.
This CL moves the checkmarks mark bits into their own per-arena bitmap
and reclaims the second scan/dead bit as a regular scan/dead bit.
I tested this by enabling doubleCheck mode in heapBitsSetType and
running in both regular and GODEBUG=gccheckmark=1 mode.
Fixes#15903.
No performance degradation. (Very slight improvement on a few
benchmarks, but it's probably just noise.)
name old time/op new time/op delta
BiogoIgor 16.6s ± 1% 16.4s ± 1% -0.94% (p=0.000 n=25+24)
BiogoKrishna 19.2s ± 3% 19.2s ± 3% ~ (p=0.638 n=23+25)
BleveIndexBatch100 6.12s ± 5% 6.17s ± 4% ~ (p=0.170 n=25+25)
CompileTemplate 206ms ± 1% 205ms ± 1% -0.43% (p=0.005 n=24+24)
CompileUnicode 82.2ms ± 2% 81.5ms ± 2% -0.95% (p=0.001 n=22+22)
CompileGoTypes 755ms ± 3% 754ms ± 4% ~ (p=0.715 n=25+25)
CompileCompiler 3.73s ± 1% 3.73s ± 1% ~ (p=0.445 n=25+24)
CompileSSA 8.67s ± 1% 8.66s ± 1% ~ (p=0.836 n=24+22)
CompileFlate 134ms ± 2% 133ms ± 1% -0.66% (p=0.001 n=24+23)
CompileGoParser 164ms ± 1% 163ms ± 1% -0.85% (p=0.000 n=24+24)
CompileReflect 466ms ± 5% 466ms ± 3% ~ (p=0.863 n=25+25)
CompileTar 182ms ± 1% 182ms ± 1% -0.31% (p=0.048 n=24+24)
CompileXML 249ms ± 1% 248ms ± 1% -0.32% (p=0.031 n=21+25)
CompileStdCmd 10.3s ± 1% 10.3s ± 1% ~ (p=0.459 n=23+23)
FoglemanFauxGLRenderRotateBoat 8.66s ± 1% 8.62s ± 1% -0.47% (p=0.000 n=23+24)
FoglemanPathTraceRenderGopherIter1 20.3s ± 3% 20.2s ± 2% ~ (p=0.893 n=25+25)
GopherLuaKNucleotide 29.7s ± 1% 29.8s ± 2% ~ (p=0.421 n=24+25)
MarkdownRenderXHTML 246ms ± 1% 247ms ± 1% ~ (p=0.558 n=25+24)
Tile38WithinCircle100kmRequest 779µs ± 4% 779µs ± 3% ~ (p=0.954 n=25+25)
Tile38IntersectsCircle100kmRequest 1.02ms ± 3% 1.01ms ± 4% ~ (p=0.658 n=25+25)
Tile38KNearestLimit100Request 984µs ± 4% 986µs ± 4% ~ (p=0.627 n=24+25)
[Geo mean] 552ms 551ms -0.19%
https://perf.golang.org/search?q=upload:20200723.6
Change-Id: Ic703f26a83fb034941dc6f4788fc997d56890dec
Reviewed-on: https://go-review.googlesource.com/c/go/+/244539
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
The heapBitsSetType function has a slow doubleCheck debugging mode
that checks the bitmap written out by the rest of the function using
far more obvious logic. But even this has some surprisingly complex
logic in it. Simplify it a bit. This also happens to fix the logic on
32-bit.
Fixes#40335.
Change-Id: I5cee482ad8adbd01cf5b98e35a270fe941ba4940
Reviewed-on: https://go-review.googlesource.com/c/go/+/244538
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The runtime has its own implementation of string indexing. To reduce
code duplication and cognitive load, replace this with calls to the
internal/bytealg package. We can't do this on Plan 9 because it needs
string indexing in a note handler (which isn't allowed to use the
optimized bytealg version because it uses SSE), so we can't just
eliminate the index function, but this CL does down-scope it so make
it clear it's only for note handlers on Plan 9.
Change-Id: Ie1a142678262048515c481e8c26313b80c5875df
Reviewed-on: https://go-review.googlesource.com/c/go/+/244537
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Since NetBSD 7, hw.ncpuonline reports the number of CPUs online, while
hw.cpu reports the number of CPUs configured. Try hw.cpuonline first and
fall back to hw.ncpu in case it fails (which is the case on NetBSD
before 7.0).
This follows the behavior on OpenBSD (see CL 161757). Also, Go
in pkgsrc is patched to use hw.cpuonline, so this CL would allow said
patch to be dropped.
Updates #30824
Change-Id: Id1c19dff2c1e4401e6074179fae7c708ba0e3098
Reviewed-on: https://go-review.googlesource.com/c/go/+/231957
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>
Instead of returning a bad verb error format for runes above
utf8.Maxrune return a quoted utf8.RuneError rune (\ufffd).
This makes the behaviour consistent with the "c" verb and
aligns behaviour to not return bad verb error format when
a verb is applied to the correct argument type.
Fixes#14569
Change-Id: I679485f6bb90ebe408423ab68af16cce38816cd0
Reviewed-on: https://go-review.googlesource.com/c/go/+/248759
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The two existing benchmarks encode randomized pixels, which isn't very
representative. The two new benchmarks encode a PNG photo as a GIF.
Also rename the benchmarks for consistency.
Also fix the bytes-per-op measure for paletted images, which are 1 (not
4) bytes per pixel.
Also simplify BenchmarkEncodeRandomPaletted (formerly just called
BenchmarkEncode). It doesn't need to generate a random palette (and the
GIF encoder largely doesn't care about the palette's RGBA values).
Use palette.Plan9 instead, a pre-existing 256-element color palette.
Change-Id: I10a6ea4e9590bb0d9f76e8cc0f4a88d43b1d650d
Reviewed-on: https://go-review.googlesource.com/c/go/+/248218
Reviewed-by: David Symonds <dsymonds@golang.org>
There is an optimization rule that removes calls to racefuncenter and
racefuncexit, if there are no other race calls in the function. The
rule removes the call to racefuncenter, but it does *not* remove the
store of its argument to the outargs section of the frame. If the
outargs section is now size 0 (because the calls to racefuncenter/exit
were the only calls), then that argument store clobbers the frame
pointer instead.
The fix is to remove the argument store when removing the call to
racefuncenter. (Racefuncexit doesn't have an argument.)
Change-Id: I183ec4d92bbb4920200e1be27b7b8f66b89a2a0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/248262
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These operations are async unsafe on architectures that use
frame pointers.
The reason is they rely on data being safe when stored below the stack
pointer. They do:
45da69: 48 89 6c 24 f0 mov %rbp,-0x10(%rsp)
45da6e: 48 8d 6c 24 f0 lea -0x10(%rsp),%rbp
45da73: e8 7d d0 ff ff callq 45aaf5 <runtime.duffzero+0x115>
45da78: 48 8b 6d 00 mov 0x0(%rbp),%rbp
This dance ensures that inside duffzero, it looks like there is a
proper frame pointer set up, so that stack walkbacks work correctly if
the kernel samples during duffzero.
However, this instruction sequence depends on data not being clobbered
even though it is below the stack pointer.
If there is an async interrupt at any of those last 3 instructions,
and the interrupt decides to insert a call to asyncPreempt, then the
saved frame pointer on the stack gets clobbered. The last instruction
above then restores junk to the frame pointer.
To prevent this, mark these instructions as async unsafe.
(The body of duffzero is already async unsafe, as it is in package runtime.)
Change-Id: I5562e82f9f5bd2fb543dcf2b6b9133d87ff83032
Reviewed-on: https://go-review.googlesource.com/c/go/+/248261
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The default ctrl+c handler should process exits in situations where it
makes sense, like console apps, but not in situations where it doesn't,
like libraries or services. Therefore, we should remove the exit(2) so
that the default handler is used for this. This also uses the more
proper windows exit code of STATUS_CONTROL_C_EXIT, with the base case
handler installed by KernelBase.dll. In particular, this helps in the
case of services, which previously would terminate when receiving
shutdown signals, instead of passing them onward to the service program.
In this CL, contrary to CL 244959, we do not need to special case
services with expensive detection algorithms, or rely on hard-coded
library/archive flags.
Fixes#40167.
Fixes#40074.
Change-Id: I9bf6ed6f65cefeff754d270aa33fa4df8d0b451f
Reviewed-on: https://go-review.googlesource.com/c/go/+/243597
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Currently, generated struct wrapper for closure is not handled in
mustHeapAlloc. That causes compiler crashes when the wrapper struct
is too large for stack, and must be heap allocated instead.
Fixes#39292
Change-Id: I14c1e591681d9d92317bb2396d6cf5207aa93e08
Reviewed-on: https://go-review.googlesource.com/c/go/+/244917
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 230121 fixed the bug that struct literal blank fields type array/struct
can not be initialized. But it still misses some cases when an expression
causes "candiscard(value)" return false. When these happen, we recursively
call fixedlit with "var_" set to "_", and hit the bug again.
To fix it, just making splitnode return "nblank" whenever "var_" is "nblank".
Fixes#38905
Change-Id: I281941b388acbd551a4d8ca1a235477f8d26fb6e
Reviewed-on: https://go-review.googlesource.com/c/go/+/232617
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Simplifying some code without compromising performance.
My CPU is Intel Xeon Gold 6161, 2.20GHz, 64-bit operating system.
The memory is 8GB. This is my test environment, I hope to help you judge.
Benchmark:
name old time/op new time/op delta
Log1p-4 21.8ns ± 5% 21.8ns ± 4% ~ (p=0.973 n=20+20)
Change-Id: Icd8f96f1325b00007602d114300b92d4c57de409
Reviewed-on: https://go-review.googlesource.com/c/go/+/233940
Reviewed-by: Robert Griesemer <gri@golang.org>
If the timeout triggers before writing to the done channel, the
goroutine will be blocked waiting for a corresponding read that’s
no longer existent, thus a goroutine leak. This change fixes that by
using a buffered channel instead.
Change-Id: I9cf4067a58bc5a729ab31e4426edd78bd359e8e0
GitHub-Last-Rev: a7d811a7be
GitHub-Pull-Request: golang/go#40236
Reviewed-on: https://go-review.googlesource.com/c/go/+/242902
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds parentheses so as to properly bind <- to the right most
channel.
This meant that previously given:
ChanOf(<-chan T)
it would mistakenly try to look up the type as
chan <-chan T
instead of
chan (<-chan T)
Fixes#39897
Change-Id: I8564916055f5fadde3382e41fe8820a1071e5f13
GitHub-Last-Rev: f8f2abe8d4
GitHub-Pull-Request: golang/go#39898
Reviewed-on: https://go-review.googlesource.com/c/go/+/240280
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Taking the live variable set from the last return point is problematic.
See #40629 for details, but there may not be a return point, or it may
be before the final defer.
Additionally, keeping track of the last call as a *Value doesn't quite
work. If it is dead-code eliminated, the storage for the Value is reused
for some other random instruction. Its live variable information,
if it is available at all, is wrong.
Instead, just mark all the open-defer argument slots as live
throughout the function. (They are already zero-initialized.)
Fixes#40629
Change-Id: Ie456c7db3082d0de57eaa5234a0f32525a1cce13
Reviewed-on: https://go-review.googlesource.com/c/go/+/247522
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
modload.Init initialized the build cache with the intent of providing
a better error message in Go 1.12, when the build cache became
mandatory (in module mode, packages aren't installed outside the build
cache). Unfortunately, this didn't provide a more descriptive error
(the cache calls base.Fatalf with its own message), and it caused
errors for commands that don't use the cache (like 'go mod edit').
This CL removes the cache initialization from modload.Init. The
builder will initialize it when it's needed.
For #39882
Change-Id: Ibc01ae4e59358dcd08a07ffc97bf556514d0366f
Reviewed-on: https://go-review.googlesource.com/c/go/+/240548
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
In CL 239797, str.GlobsMatchPath was copied to golang.org/x/mod/module
as MatchPrefixPatterns. This CL updates x/mod, switches calls to use
the new function, and deletes the old function.
For #38725
Change-Id: I7241032228b574aa539426a92d2f5aad9ee001e2
Reviewed-on: https://go-review.googlesource.com/c/go/+/240061
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
modfetch.WriteGoSum now accepts a map[module.Version]bool parameter.
This is used to prevent some new sums from being saved to go.sum when
they would be removed by the next 'go mod tidy'. Previusly, sums were
saved for modules looked up during import resolution.
A new function, modload.TrimGoSum, is also introduced, which marks
sums for deletion. 'go mod tidy' now uses this. The new logic
distinguishes between go.mod sums and content sums, which lets 'go mod
tidy' delete sums for modules in the build graph but not the build
list.
Fixes#31580Fixes#36260Fixes#33008
Change-Id: I06c4125704a8bbc9969de05265967ec1d2e6d3e8
Reviewed-on: https://go-review.googlesource.com/c/go/+/237017
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The Builder isn't needed by MkEnv, and Builder.Init doesn't have side
effects that change the environment. Builder.Init does currently call
CheckGOOSARCHPair, but that's being moved out in CL 234658.
Builder.Init creates the temporary work directory used by the
builder. For the builder created in MkEnv, this directory is never
used. Creating this directory can cause unnecessary errors for
commands that don't use a builder like 'go clean' and 'go list'.
Fixes#38395
Updates #24398
Change-Id: Ib93ae55afdf958000470657f4c4ff5bd92700e46
Reviewed-on: https://go-review.googlesource.com/c/go/+/236563
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The prior implementation used the format verb %v which unfortunately
improperly wrapped any underlying scanner errors, and we couldn't use
errors.Is nor errors.As. This change fixes that by using the %w verb.
Added a unit to ensure that both error sub string matching works, but
also that errors.Is works as expected.
Fixes#38099
Change-Id: Iea667041dd8081d961246f77f2542330417292dc
Reviewed-on: https://go-review.googlesource.com/c/go/+/248337
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Daniel Theophanes <kardianos@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The optimization that replaces inline markers with pre-existing
instructions assumes that 'Prog' values produced by the compiler are
still reachable after the assembler has run. This was not true on
s390x where the assembler was removing NOP instructions from the
linked list of 'Prog' values. This led to broken inlining data
which in turn caused an infinite loop in the runtime traceback code.
Fix this by stopping the s390x assembler backend removing NOP
values. It does not make any difference to the output of the
assembler because NOP instructions are 0 bytes long anyway.
Fixes#40473.
Change-Id: Ib4fabadd1de8adb80421f75950ee9aad2111147a
Reviewed-on: https://go-review.googlesource.com/c/go/+/247697
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Previously, the assembler removed NOPs from the Prog list in
obj9.go. NOPs shouldn't be removed if they were added as
an inline mark, as described in the issue below.
Fixes#40689
Once the NOPs were left in the Prog list, some instructions
were flagged as invalid because they had an operand which was
not represented in optab. In order to preserve the previous
assembler behavior, entries were added to optab for those
operand cases. They were not flagged as errors before because
the NOP instructions were removed before the code to check the
valid opcode/operand combinations.
Change-Id: Iae5145f94459027cf458e914d7c5d6089807ccf8
Reviewed-on: https://go-review.googlesource.com/c/go/+/247842
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Paul Murphy <murp@ibm.com>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Reviewed-by: Keith Randall <khr@golang.org>
Minor cleanup: remove the symbol attribute AttrSeenGlobal, since it is
redundant with the existing attribute AttrOnList (no need to have what
amounts to a separate flag for checking the same property).
Change-Id: Ia269b64de37c2bb4a2314bbecf3d2091c6d57424
Reviewed-on: https://go-review.googlesource.com/c/go/+/239477
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add a draft version of a blurb on improvements to the linker. This
will need to be finalized later in the release since there are still
some additional changes to be made to the linker in 1.16.
Updates #40703.
Change-Id: Id85c7e129071cc2faacb09c53a2968bd52b0a7b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/248238
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Go 1.14 included a (rather awful) workaround for a Linux kernel bug
that corrupted vector registers on x86 CPUs during signal delivery
(https://bugzilla.kernel.org/show_bug.cgi?id=205663). This bug was
introduced in Linux 5.2 and fixed in 5.3.15, 5.4.2 and all 5.5 and
later kernels. The fix was also back-ported by major distros. This
workaround was necessary, but had unfortunate downsides, including
causing Go programs to exceed the mlock ulimit in many configurations
(#37436).
We're reasonably confident that by the Go 1.16 release, the number of
systems running affected kernels will be vanishingly small. Hence,
this CL removes this workaround.
This effectively reverts CLs 209597 (version parser), 209899 (mlock
top of signal stack), 210299 (better failure message), 223121 (soft
mlock failure handling), and 244059 (special-case patched Ubuntu
kernels). The one thing we keep is the osArchInit function. It's empty
everywhere now, but is a reasonable hook to have.
Updates #35326, #35777 (the original register corruption bugs).
Updates #40184 (request to revert in 1.15).
Fixes#35979.
Change-Id: Ie213270837095576f1f3ef46bf3de187dc486c50
Reviewed-on: https://go-review.googlesource.com/c/go/+/246200
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In Go 1.15 we switched the default linking mode for PIE on
Linux/AMD64 and Linux/ARM64 to internal linking. Clarify that
the previous behavior (external linking) can still be used with
a flag.
Fixes#40719.
Change-Id: Ib7042622bc91e1b1aa31f520990d03b5eb6c56bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/248199
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In the dev.link branch we have continued developing the new object
file format support and the linker improvements described in
https://golang.org/s/better-linker . Since the last merge (May 1st
2020), more progress has been made to improve the new linker, with
improvements on both linker speed and memory usage.
Fixes#40703.
Change-Id: I9924ea88d981845c3a40ec8c25820120fc21c003
This change propagates context into PackagesForErrors and Do for
the purpose of tracing, and calls trace.StartSpan on PackagesForErrors
and Do, so that the trace now shows the broad outline of where
the "Loading" and "Execution" phases are in the build.
Updates #38714
Change-Id: Ib9a7cf7030210f68f76663d1c8a7461e0a226611
Reviewed-on: https://go-review.googlesource.com/c/go/+/238541
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The ViewerEvent, ViewerData and ViewerFrame structs are moved into
cmd/internal/traceviewer, and renamed Event, Data, and Frame.
The structs are the same, except for the following: A definition
for the JSON "bp" field that's defined in the trace format, but
missing in the structs has been added. Also, the Tid and Pid fields
on Event have been renamed TID and PID to better match Go style.
Finally, the footer field on ViewerData, which hasn't been used
for a while, has been removed.
This CL is in preparation for the usage of these structs by cmd/go's
tracing functionality.
Updates #38714
Change-Id: I345f23617b96d4629b876ae717f89d56a67e05a3
Reviewed-on: https://go-review.googlesource.com/c/go/+/239098
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This template is based on CL 220278 and previous ones like it.
Include Compiler and Linker sections proactively, they can be
removed if they don't end up being needed for Go 1.16.
Use two spaces of indentation for TODOs to set a better precedent
for the final text that will take its place.
'relnote -html' does not report any changes at this time.
For #40700.
Change-Id: I096b0ce0d33aaaa6fae9c91c0d2dfb89b9c5e94c
Reviewed-on: https://go-review.googlesource.com/c/go/+/248198
Reviewed-by: Carlos Amedee <carlos@golang.org>
This is the start of the Go 1.16 development cycle, so update the
Version value accordingly. It represents the Go 1.x version that
will soon open up for development (and eventually become released).
Historically, we used to bump this at an arbitrary time throughout
the development cycle, but it's better to be more predictable about
updating it. The start of a development cycle should be the most
appropriate time: it clearly marks the boundary between 1.15 and
1.16 development, and doing it early can help catch issues in other
tooling. See issue #38704 for more background.
There is no longer a need to update the list of Go versions in
src/go/build/doc.go because it does not exist as of CL 232981.
For #40705.
Updates #38704.
Updates #37018.
Change-Id: Id8ee733b5e79c53b6cd03509c6560614d8743833
Reviewed-on: https://go-review.googlesource.com/c/go/+/248038
Reviewed-by: Carlos Amedee <carlos@golang.org>
CL 245485 introduced a map for used files in a function. When
numbering symbols, make sure we traverse the files in
deterministic order.
Should fix longtest builders.
Change-Id: I1006bc5425116ab40e33a61e8f5acd1bdb4abad9
Reviewed-on: https://go-review.googlesource.com/c/go/+/247997
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Read Go object files using cmd/internal/goobj2 package directly,
instead of using cmd/internal/goobj as an intermediate layer.
Now cmd/internal/archive is only about reading archives.
Change-Id: Ifecb217fb26c16c26fc1bbc3fba0ed44710020ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/246443
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Rename cmd/internal/goobj package to cmd/internal/archive. This
is in preparation of a refactoring of object and archive file
reading packages.
With this CL, the cmd/internal/archive contains logic about
reading Go object files. This will be moved to other places in
later CLs.
Change-Id: Ided7287492a4766183d6e49be840a7f361504d1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/246442
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
This update was created using the updatecontrib command:
go get golang.org/x/build/cmd/updatecontrib
cd gotip
updatecontrib
With manual changes based on publicly available information
to canonicalize letter case and formatting for a few names.
For #12042.
Change-Id: I66dc5ee28d9a64bc9d150e72d136d8f71e50373b
Reviewed-on: https://go-review.googlesource.com/c/go/+/247767
Reviewed-by: Carlos Amedee <carlos@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Currently, nanotime1 (and walltime1) is not reentrant, in that it
sets m.vdsoSP at entry and clears it at exit. If a signal lands
in between, and nanotime1 is called from the signal handler, it
will clear m.vdsoSP while we are still in nanotime1. If (in the
unlikely event) it is signaled again, m.vdsoSP will be wrong,
which may cause the stack unwinding code to crash.
This CL makes it reentrant, by saving/restoring the previous
vdsoPC and vdsoSP, instead of setting it to 0 at exit.
TODO: have some way to test?
Change-Id: I9ee53b251f1d8a5a489c71d4b4c0df1dee70c3e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/246763
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In order to prevent renumbering of filenames in pclntab generation, use
the per-package file list (previously only used for DWARF generation) as
file-indices. This is the largest step to eliminate renumbering of
filenames in pclntab.
Note, this is probably not the final state of the file table within the
object file. In this form, the linker loads all filenames for all
objects. I'll move to storing the filenames as regular string
symbols,and defaulting all string symbols to using the larger hash value
to make generation of pcln simplest, and most memory friendly.
Change-Id: I23daafa3f4b4535076e23100200ae0e7163aafe0
Reviewed-on: https://go-review.googlesource.com/c/go/+/245485
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Add a new PPC64-only linker test that does a build with the
-debugppc64textsize debugging option (selecting a lower the threshold
for text section splitting) to verify that no bugs have been
introduced in the linker code that manages this process.
Change-Id: Iea3f16a04c894d528eab2cb52f1ec1d75a2770cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/241499
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Add a new debugging command line option (-debugppc64textsize=N) that
forces the start of a new text section after ".text" hits N bytes as
opposed to the architected limit of 2^26. This is intended to enable
testing of the linker code paths that handle multiple .text sections
on PPC64 without resorting to building giant applications.
Updates #20492.
Change-Id: I74ab7fd1e412e9124de5bd0d8d248c5e73225ae3
Reviewed-on: https://go-review.googlesource.com/c/go/+/241073
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The code in the the linker's genelfsym() routine was not properly
including runtime.text.%d marker symbols that are emitted on PPC64
when a very large text section is split into chunks. This bug was
introduced in CL 233338 when portions of asmb2() were converted
from sym.Symbol to loader.Sym usage.
Change-Id: Idfed944c41e1805f78f35be67bcdd18bdefd7819
Reviewed-on: https://go-review.googlesource.com/c/go/+/241498
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
On AIX, container symbols are handled in a weird way (unlike
other platforms): the outer symbol needs to have size (but still
no data), and the inner symbols must not be in the symbol table
(otherwise it overlaps with the outer symbol, which the system
linker doesn't like).
As of CL 241598, pclntab becomes a container symbol. We need to
follow the rule above for AIX.
Fix AIX build.
Change-Id: Ie2515a4cabbd8cf3f6d3868643a28f64ca3365a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/246479
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Currently, at compile time, for each itab symbol, we create an
"itablink" symbol which holds solely the address of the itab
symbol. At link time, all the itablink symbols are grouped
together to form the itablinks slice.
This CL removes the itablink symbols, and directly generate the
itablinks slice in the linker. This removes a number of symbols,
which are dupOK and generally have long names. And also removes
a special handling of itablink symbols in the deadcode pass which
iterates through all symbols.
Change-Id: I475c3c8899e9fbeec9abc7647b1e4a69aa5c3c5a
Reviewed-on: https://go-review.googlesource.com/c/go/+/245901
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The hash maps are used to deduplicate hashed symbols. Once we
loaded all the symbols, we no longer need the hash maps. Drop
them.
Linking cmd/compile,
name old live-B new live-B delta
Loadlib_GC 13.1M ± 0% 11.3M ± 0% -13.62% (p=0.008 n=5+5)
Change-Id: I4bb1f84e1111a56d9e777cd6a68f7d974b60e321
Reviewed-on: https://go-review.googlesource.com/c/go/+/245721
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Extend the content-addressable symbol mechanism to itab symbols.
Itab symbols require global uniqueness (as at run time we compare
pointers), so it needs to be reliably deduplicated. Currently the
content hash depends on symbol name expansion, so we can only do
this when all Go packages are built with know package paths. Fall
back to checking names if any Go package is built with unknown
package path.
Change-Id: Icf5e8873755050c20e5fc6549f6de1c883254c89
Reviewed-on: https://go-review.googlesource.com/c/go/+/245719
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The type descriptor symbol of a defined (named) type (and pointer
to it) is defined only in the package that defines the type. It
is not dupOK, unlike other type descriptors. So it can be
referenced by index. Currently it is referenced by name for
cross-package references, because the index is not exported and
so not known to the referencing package.
This CL passes the index through the export data, so the symbol
can be referenced by index, and does not need to be looked up by
name. This also makes such symbol references consistent: it is
referenced by index within the defining package and also cross-
package, which makes it easier for content hashing (in later CLs).
One complication is that we need to set flags on referenced
symbols (specifically, the UsedInIface flag). Before, they are
non-package refs, which naturally carry flags in the object file.
For indexed refs, we currently don't put their flags in the
object file. Introduce a new block for this.
Change-Id: I8126f8e318ac4e6609eb2ac136201fd6c264c256
Reviewed-on: https://go-review.googlesource.com/c/go/+/245718
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Leaving creation of the funcID till the linker requires the linker to
load the function and file names into memory. Moving these into the
compiler/assembler prevents this.
This work is a step towards moving all func metadata into the compiler.
Change-Id: Iebffdc5a909adbd03ac263fde3f4c3d492fb1eac
Reviewed-on: https://go-review.googlesource.com/c/go/+/244024
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
For dupOK symbols, their attributes should be OR'd. Most of the
attributes are expected to be set consistently across multiple
definitions, but UsedInIface must be OR'd, and for alignment we
need to pick the largest one. Currently the attributes are not
always OR'd, depending on addSym returning true or false. This
doesn't cause any real problem, but it would be a problem if we
make type descriptor symbols content-addressable.
This CL removes the second result of addSym, and lets preloadSyms
always set the attributes. Also removes the alignment handling on
addSym, handles it in preloadSyms only.
Change-Id: I06b3f0adb733f6681956ea9ef54736baa86ae7bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/245720
Reviewed-by: Jeremy Faller <jeremy@golang.org>
We're reworking pclntab generation in the linker, and with that we're
moving FuncID generation in to the compiler. Determining the FuncID is
done by a lookup on the package.function name; therefore, we need the
package whenever we make the TEXT symbols.
Change-Id: I805445ffbf2f895f06ce3a91fb09126d012bf86e
Reviewed-on: https://go-review.googlesource.com/c/go/+/245318
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Move the function names out of runtime.pclntab_old, creating
runtime.funcnametab. There is an unfortunate artifact in this change in
that calculating the funcID still requires loading the name. Future work
will likely pull this out and put it into the object file Funcs.
ls -l cmd/compile (darwin):
before: 18524016
after: 18519952
The difference in size can be attributed to alignment in pclntab_old.
Change-Id: Ibcbb230d4632178f8fcd0667165f5335786381f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/243223
Reviewed-by: Austin Clements <austin@google.com>
Non functional change.
As runtime.pclntab breaks up, it'll be easier if we can just pass around
the pclntab state. Also, eliminate the globals in pclntab.
Change-Id: I2a5849e8f5f422a336a881e53a261e3997d11c44
Reviewed-on: https://go-review.googlesource.com/c/go/+/242599
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
As of July 2020, a fair amount of the new linker's live memory, and
runtime is spent generating pclntab. In an effort to streamline that
code, this change starts breaking up the generation of runtime.pclntab
into smaller chunks that can run later in a link. These changes are
described in an (as yet not widely distributed) document that lays out
an improved format. Largely the work consists of breaking up
runtime.pclntab into smaller pieces, stopping much of the data
rewriting, and getting runtime.pclntab into a form where we can reason
about its size and look to shrink it. This change is the first part of
that work -- just pulling out the header, and demonstrating where a
majority of that work will be.
Change-Id: I65618d0d0c780f7e5977c9df4abdbd1696fedfcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/241598
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
The symbol's data in the object file (sym.P) may already not
contain trailing zeros (e,g, for [10]int{1}), but sometimes it
does (e.g. for [10]int{1,0}). The linker can already handle this
case. We just always trim the trailing zeros for content hashing,
so it can deduplicate [10]int{1} and [10]int{1,0}.
Note: in theory we could just trim the zeros in the symbol data
as well. But currently the linker depends on reading symbol data
for certain symbols (e.g. type symbol decoding), and trimming
will complicates things in the linker.
Change-Id: I9e90e41e6ac808b36855b0713a85e61c33bf093a
Reviewed-on: https://go-review.googlesource.com/c/go/+/245717
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
We have Reloc and Reloc2. Reloc2 is the better approach and most
code uses Reloc2. There are still uses of Reloc. This CL migrates
them to Reloc2, and removes Reloc.
Change-Id: Id5f6a6019e1e044add682d05e70ebb1548ec58d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/245577
Reviewed-by: Jeremy Faller <jeremy@golang.org>
We used to generate all external relocations in memory, then emit
the relocation records at a later pass. The data structures were
chosen so that it takes as little memory as possible. Now we just
stream out external relocations, and ExtReloc is just a local
variable. Change the data structure to avoid repeated read of
some fields. Also get rid of ExtRelocView, as it is no longer
necessary.
Change-Id: I40209bbe4387af231b29788125c3b4ebb0ff4a33
Reviewed-on: https://go-review.googlesource.com/c/go/+/245479
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
We accidentally passed the address of a local to a function
pointer, where we should pass the address of a global.
Linking cmd/compile with external linking:
Asmb2_GC 32.5ms ± 5% 21.6ms ± 3% -33.57% (p=0.016 n=5+4)
Asmb2_GC 29.2MB ± 0% 6.4MB ± 0% -78.20% (p=0.008 n=5+5)
Asmb2_GC 1.43M ± 0% 0.00M ± 4% -99.98% (p=0.008 n=5+5)
Change-Id: I4754189bcc20f824627d95858ba35285d53c614d
Reviewed-on: https://go-review.googlesource.com/c/go/+/245337
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Do them in the same CL so ARM's archreloc doesn't need to support
both streaming and non-streaming.
TODO: we haven't switched to using mmap to emit external
relocations on Windows.
Change-Id: Ica2ee89c03fc74839efd6b9e26c80585fcdce45c
Reviewed-on: https://go-review.googlesource.com/c/go/+/244357
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
OutData was used for a symbol to point to its data in the output
buffer, in order to apply relocations. Now we fold relocation
application to Asmb next to symbol data writing. We can just pass
the output data as a local variable.
Linking cmd/compile,
name old time/op new time/op delta
Asmb_GC 19.0ms ±10% 16.6ms ± 9% -12.50% (p=0.032 n=5+5)
name old alloc/op new alloc/op delta
Asmb_GC 3.78MB ± 0% 0.14MB ± 1% -96.41% (p=0.008 n=5+5)
name old live-B new live-B delta
Asmb_GC 27.5M ± 0% 23.9M ± 0% -13.24% (p=0.008 n=5+5)
Change-Id: Id870a10dce2a0a7447a05029c6d0ab39b47d0a12
Reviewed-on: https://go-review.googlesource.com/c/go/+/244017
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Support streaming external relocations on ARM64. Support
architecture-specific relocations.
Also support streaming external relocations on Darwin. Do it in
the same CL so ARM64's archreloc doesn't need to support both
streaming and non-streaming.
Change-Id: Ia7fee9957892f98c065022c69a51f47402f4d6e2
Reviewed-on: https://go-review.googlesource.com/c/go/+/243644
Reviewed-by: Jeremy Faller <jeremy@golang.org>
For content-addressable symbols, we build its content hash based
on the symbol data and relocations. When the compiler builds the
symbol data, it may not always include the trailing zeros, e.g.
the data of [10]int64{1,2,3} is only the first 24 bytes.
Therefore, we may end up with symbols with the same contents
(thus same hash) but different sizes. This is not actually a hash
collision. In this case, we can deduplicate them and keep the one
with the larger size.
Change-Id: If6834542d7914cc00f917d7db151955e5aee6f30
Reviewed-on: https://go-review.googlesource.com/c/go/+/243718
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
For content-addressable symbols with relocations, we build a
content hash based on its content and relocations. Depending on
the category of the referenced symbol, we choose different hash
algorithms such that the hash is globally consistent.
For now, we only support content-addressable symbols with
relocations when the current package's import path is known, so
that the symbol names are fully expanded. Otherwise, if the
referenced symbol is a named symbol whose name is not fully
expanded, the hash won't be globally consistent, and can cause
erroneous collisions. This is fine for now, as the deduplication
is just an optimization, not a requirement for correctness (until
we get to type descriptors).
Change-Id: I639e4e03dd749b5d71f0a55c2525926575b1ac30
Reviewed-on: https://go-review.googlesource.com/c/go/+/243142
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
For now, we only do this for symbols without relocations.
Mark static temps "local", as they are not referenced across DSO
boundaries. And deduplicating a local symbol and a non-local
symbol can be problematic.
Change-Id: I0a3dc4138aaeea7fd4f326998f32ab6305da8e4b
Reviewed-on: https://go-review.googlesource.com/c/go/+/243141
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Currently, when external linking, in relocsym (in asmb pass), we
convert Go relocations to an in-memory representation of external
relocations, and then in asmb2 pass we write them out to the
output file. This is not memory efficient.
This CL makes it not do the conversion but directly stream out
the external relocations based on Go relocations. Currently only
do this on AMD64 ELF systems.
This reduces memory usage, but makes the asmb2 pass a little
slower.
Linking cmd/compile with external linking:
name old time/op new time/op delta
Asmb_GC 83.8ms ± 7% 70.4ms ± 4% -16.03% (p=0.008 n=5+5)
Asmb2_GC 95.6ms ± 4% 118.2ms ± 5% +23.65% (p=0.008 n=5+5)
TotalTime_GC 1.59s ± 2% 1.62s ± 1% ~ (p=0.151 n=5+5)
name old alloc/op new alloc/op delta
Asmb_GC 26.0MB ± 0% 4.1MB ± 0% -84.15% (p=0.008 n=5+5)
Asmb2_GC 8.19MB ± 0% 8.18MB ± 0% ~ (p=0.222 n=5+5)
name old live-B new live-B delta
Asmb_GC 49.2M ± 0% 27.4M ± 0% -44.38% (p=0.008 n=5+5)
Asmb2_GC 51.5M ± 0% 29.7M ± 0% -42.33% (p=0.008 n=5+5)
TODO: figure out what is slow. Possible improvements:
- Remove redundant work in relocsym.
- Maybe there is a better representation for external relocations
now.
- Fine-grained parallelism in emitting external relocations.
- The old elfrelocsect only iterates over external relocations,
now we iterate over all relocations. Is it too many?
Change-Id: Ib0a8ee8c88d65864c62b89a8d634614f7f2c813e
Reviewed-on: https://go-review.googlesource.com/c/go/+/242603
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
For symbols of size 8 bytes or below, we can map them to 64-bit
hash values using the identity function. There is no need to use
longer and more expensive hash functions.
For them, we introduce another pseudo-package, PkgIdxHashed64. It
is like PkgIdxHashed except that the hash function is different.
Note that the hash value is not affected with trailing zeros,
e.g. "A" and "A\0\0\0" have the same hash value. This allows
deduplicating a few more symbols. When deduplicating them, we
need to keep the longer one.
Change-Id: Iad0c2e9e569b6a59ca6a121fb8c8f0c018c6da03
Reviewed-on: https://go-review.googlesource.com/c/go/+/242362
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Fill in the data at compile time, and get rid of the preprocess
function in the linker.
We need to be careful with symbol alignment: data symbols are
generally naturally aligned, except for string symbols which are
not aligned. When deduplicating two symbols with same content but
different alignments, we need to keep the biggest alignment.
Change-Id: I4bd96adfdc5f704b5bf3a0e723457c9bfe16a684
Reviewed-on: https://go-review.googlesource.com/c/go/+/242081
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
This CL introduces content-addressable symbols (a.k.a. hashed
symbols) to object files. Content-addressable symbols are
identified and referenced by their content hashes, instead of by
names.
In the object file, a new pseudo-package index PkgIdxHashed is
introduced, for content-addressable symbols, and a new block is
added to store their hashes. The hashes are used by the linker to
identify and deduplicate the symbols.
For now, we only support content-addressable symbols that are
always locally defined (i.e. no cross-package references).
As a proof of concept, make string constant symbols content-
addressable.
Change-Id: Iaf53efd74c0ffb54fa95f784628cc84e95844536
Reviewed-on: https://go-review.googlesource.com/c/go/+/242079
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The special case is no longer needed, didn't actually work, and
we no longer even save this map anywhere (see CL 240621 for more
information).
Change-Id: I19bcf32cace22decf50fd6414d4519cc51cbb0be
Reviewed-on: https://go-review.googlesource.com/c/go/+/241982
Reviewed-by: Austin Clements <austin@google.com>
Set the AttrStatic flag on compiler-emitted TOC symbols for ppc64; these
symbols don't need to go into the final symbol table in Go binaries.
This fixes a buglet introduced by CL 240539 that was causing failures
on the aix builder.
Change-Id: If8b63bcf6d2791f1ec5a0c371d2d11e806202fd2
Reviewed-on: https://go-review.googlesource.com/c/go/+/241637
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Don't emit symbol table entries for compiler-generated file-local
symbols (this category includes .stmp_* temporaries and *.stkobj
symbols). Note that user-written static symbols within assembler
sources will still be added to the symbol table. Apply the same test
when emitting DWARF for global variables.
Change-Id: I4db77a2750a0b575e051dfea895c4742cf6709a6
Reviewed-on: https://go-review.googlesource.com/c/go/+/240539
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Mark compiler-generated ".stmp_%d" and "<fn>.stkobj" symbols as
AttrStatic, so as to tell the linker that they do not need to be
inserted into its name lookup tables.
Change-Id: I59ffd11659b2c54c2d0ad41275d05c3f919e3b88
Reviewed-on: https://go-review.googlesource.com/c/go/+/240497
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Following CL 240399 and CL 240400, do the same for Mach-O.
Linking cmd/compile with external linking,
name old time/op new time/op delta
Asmb2_GC 32.7ms ± 2% 13.5ms ± 6% -58.56% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
Asmb2_GC 16.5MB ± 0% 6.4MB ± 0% -61.15% (p=0.008 n=5+5)
Change-Id: I0fd7019d8713d1940e5fbbce4ee8eebd926451a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/241178
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The loader writeBlock() function has code that tries to skip the
initial portion of the input symbols list depending on the address of
the section being written-- this code is dead (skipping is never
triggered) due to similar skipping in the callers; remove this
preamble.
Change-Id: I9769694a3194faf73ebebbbc10ceba4928c3087c
Reviewed-on: https://go-review.googlesource.com/c/go/+/241067
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Introduce a new loader method "SetCarrierSym", to be used when
establishing container/containee symbol relationships for symbol
bucketing in the symtab phase.
This new method is intended to be employed in situations where you
have a series of related symbols will be represented by a single
carrier symbol as a combined entity. The pattern here is that the
sub-symbols contain content but will be anonymous from a symbol table
perspective; the carrier symbol has no content itself but will appear
in the symbol table. Examples of carrier symbols that follow this
model are "runtime.itablink" and "runtime.typelink".
Change-Id: I1a3391a71062c7c740cb108b3fa210b7f69b81ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/240509
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Introduce a new loader method "AddInteriorSym" to be used when
establishing container/containee symbol relationships for host object
sub-symbols and GOT/dynamic sub-symbols.
Interior symbols are employed in situations where you have a
"container" or "payload" symbol that has content, and then a series of
"interior" sub-symbols that point into a portion of the container
symbol's content. Each interior symbol will typically have a useful
name / size / value, but no content of its own. From a symbol table
perspective the container symbol is anonymous, but the interior
symbols are added to the output symbol table.
Change-Id: I919ed5dbbfe2ef2c9a76214f7ea9b384a1be6297
Reviewed-on: https://go-review.googlesource.com/c/go/+/240508
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
In CL 240399 we changed to precompute the size for ELF relocation
records and use mmap to write them, but we left architectures
where elfreloc1 write non-fixed number of bytes. This CL handles
those architectures. When a Go relocation will turn into multiple
ELF relocations, in relocsym we account this difference and add
it to the size calculation. So when emitting ELF relocations, we
know the number of ELF relocations to be emitted.
Change-Id: I6732ab674b442f4618405e5412a77f6e4a3315d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/241079
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Now that we write ELF relocation records in mapped memory with
known sizes and offsets, we can write them in parallel.
Further speed up Asmb2 pass. Linking cmd/compile with external
linking,
Asmb2 141ms ± 4% 97ms ± 5% -30.98% (p=0.000 n=10+9)
Change-Id: I52c2b9230e90ed4421c21d7ef13a4f1e996f6054
Reviewed-on: https://go-review.googlesource.com/c/go/+/240400
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Currently, ELF relocations are generated sequentially in the heap
and flushed to output file periodically. In fact, in some cases,
the output size of the relocation records can be easily computed,
as a relocation entry has fixed size. We only need to count the
number of relocation records to compute the size.
Once the size is computed, we can mmap the output with the proper
size, and directly write relocation records in the mapped memory.
It also opens the possibility of writing relocations in parallel
(not done in this CL).
Note: on some architectures, a Go relocation may turn into
multiple ELF relocations, which makes size calculation harder.
This CL does not handle those cases, and it still writes
sequentially in the heap there.
Linking cmd/compile with external linking,
name old time/op new time/op delta
Asmb2 190ms ± 2% 141ms ± 4% -25.74% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
Asmb2_GC 66.8MB ± 0% 8.2MB ± 0% -87.79% (p=0.008 n=5+5)
name old live-B new live-B delta
Asmb2_GC 66.9M ± 0% 55.2M ± 0% -17.58% (p=0.008 n=5+5)
Change-Id: If7056bbe909dc90033eef6b9c4891fcca310602c
Reviewed-on: https://go-review.googlesource.com/c/go/+/240399
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Currently, on most platforms, the start/end symbols runtime.text
and runtime.etext are defined in symtab pass and assigned values
in address pass. In some cases (darwin+dynlink or AIX+external),
however, they are defined and assigned values in textaddress pass
(because they need non-zero sizes). Then their values get
overwritten in address pass. This is bad. The linker expects
their values to be consistent. In particular, in CL 239281,
findfunctab is split to two parts. The two parts need to have a
consistent view of the start/end symbols. If its value changes in
between, bad things can happen.
This CL fixes it by always defining runtime.text/etext symbols in
the textaddress pass.
Fix darwin and AIX builds.
Change-Id: Ifdc1bcb69d99be1b7e5b4fd31d473650c03e3b9d
Reviewed-on: https://go-review.googlesource.com/c/go/+/240065
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Create a new class of symbols internal to the linker. These symbols live
in the Loader, and are real smybols, but have no data, only size. After
symbols are allocated in the binary in asmb() a function is called that
is responsible for filling in the data.
This allows the linker to create large symbols, but not pay the price on
the heap memory.
Change-Id: Ib4291fc6e578478057ed2ec163d7b27426f1d5ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/239280
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The Go compiler includes special treatment for a small set of very
commonly used type symbols (26 to be exact); for these types it
doesn't bother to emit type descriptors for "normal" compilations, and
instead only generates them for the runtime package, so as to reduce
object file bloat.
This patch moves the set of type symbols in question from the
PkgIdxNone index space (in the object file) to the PkgIdxBuiltin
space, which saves some work in the compiler and loader (reduces each
package's index space slightly).
Change-Id: I039c805e05c1aef26f035e52760fd0a0af40f7a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/239658
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Change the object file writer to avoid adding entries to the object
file string table for builtin functions. This helps save some very
small amount of space in the object file.
Change-Id: Ic3b94a154e00eb4c7378b57613580c7073b841bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/239657
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
On AIX, in relocsym we call Xcoffadddynrel, which adds a
relocation record to a global array. relocsym already runs in
parallel. In the past we only parallelize over segments, and
we call Xcoffadddynrel only for symbols in data segment, so it is
effectively called sequentially. In CL 239197 we started to do
more fine-grained parallelism, so we need to make sure it is safe
to call Xcoffadddynrel in parallel.
Fix AIX build.
Change-Id: I3128193995a5a99d9fa04c8e728e590f17298da3
Reviewed-on: https://go-review.googlesource.com/c/go/+/239561
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The code in the compiler's DWARF line table generation emits line
table ops at the end of each function fragment to reset the state
machine registers back to an initial state, so that when the line
table fragments for each function are stitched together into a
compilation unit, each fragment will have a clean starting point. The
set-file/set-line ops emitted in this code were being applied to the
last row of the line table, however, meaning that they were
overwriting the existing values.
To avoid this problem, add code to advance the PC past the end of the
last instruction in the function, and switch to just using an
end-of-sequence operator at the end of each function instead of
explicit set-file/set-line ops.
Updates #39757.
Change-Id: Ieb30f83444fa86fb1f2cd53862d8cc8972bb8763
Reviewed-on: https://go-review.googlesource.com/c/go/+/239286
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: David Chase <drchase@google.com>
We can apply relocations of a symbol right after the symbol data
is copied to output buffer. This should help locality and
parallelism (parallelizing over blocks, instead of over segments).
Linking cmd/compile,
Asmb+Reloc 23.9ms ±18% 16.5ms ±11% -30.73% (p=0.008 n=5+5)
Linking cmd/compile with external linking,
Asmb+Reloc 74.0ms ± 3% 33.8ms ± 8% -54.32% (p=0.008 n=5+5)
In external linking mode, allocation goes up slightly, as we do
smaller batching now. It doesn't seem too bad.
Asmb+Reloc 15.0MB ± 0% 16.7MB ± 0% +11.22% (p=0.008 n=5+5)
Change-Id: Ide33d9ff86c39124c8f5cfc050d7badc753a1ced
Reviewed-on: https://go-review.googlesource.com/c/go/+/239197
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This patch introduces parallelization of DWARF generation on a per
compilation unit basis. Each compilation unit now operates on a
separate set of symbols, so it's safe to send each compilation unit to
a goroutine to be processed in parallel.
Doing this requires some restructing to ensure that any new symbols
needed are created up front, since we can't create any new syms during
the parallel portion. Similarly, the parallel portion can't set any
symbol attributes, so the check that verifies we haven't doubly listed
any DIE syms had to be reworked, and setting of reachability has to be
delayed until after the parallel phase is complete.
Change-Id: I3042b76e9b597bb1a6a44dce19efba2d02bed76b
Reviewed-on: https://go-review.googlesource.com/c/go/+/237679
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The loader's SymbolBuilder Add*/Set* methods include a call to mark
the underlying symbol as reachable (as a convenience, so that callers
would not have to set it explicitly). This code was carried over from
the corresponding sym.Symbol methods; back in the sym.Symbol world
unreachable symbols were never removed from the AllSyms slice, hence
setting and checking reachability was a good deal more important.
With the advent of the loader and the new deadcode implementation,
there is less of a need for this sort of fallback, and in addition the
implicit attr setting introduces data races in the the loader if there
are SymbolBuilder Add*/Set* method calls in parallel threads, as well
as adding overhead to the methods.
This patch gets rid of the implicit reachability setting, and instead
marks reachability in CreateSymForUpdate, as well as adding a few
explicit SetAttrReachable calls where needed.
Change-Id: I029a0c5a4a24237826a7831f9cbe5180d44cbc40
Reviewed-on: https://go-review.googlesource.com/c/go/+/237678
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Refactor some of the linker's DWARF generation methods so as to have
helper routines that do all the work for a given comp unit for a given
section (range, loc, etc). No change in functionality, this is just a
reorg in preparation for a later patch in this sequence.
Change-Id: I86fc789220326a4e522904a5924c8971d6757189
Reviewed-on: https://go-review.googlesource.com/c/go/+/237677
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Rework the way symbols are handled in DWARF line table generation to
eliminate copying the data payload for all SWDWARFLINES syms (emitted
by the compiler) into the payload of the ".debug_line" section symbol
(generated by the linker). Instead, chain together the SWDWARFLINES
symbols into a list, then append that list to the section sym list in
dwarfp (this moves us from a single monolithic .debug_line to a
.debug_line section sym followed by a list symbols (one per function
and an epilog symbol per compilation unit). To enable this work, move
the emission of the DW_LNE_set_address op (at the start of each
function) from the linker to the compiler.
Change-Id: Iec61b44a451f7a386c82a89bf944de482b018789
Reviewed-on: https://go-review.googlesource.com/c/go/+/237427
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Don't emit the .debug_pubnames/.debug_pubtypes sections. These sections
are not used by either GDB or Delve, and C++ compilers [notably GCC
and Clang] no longer emit the sections by default.
Change-Id: Ic3309755e88c8e1aa28a29366bc7f0df1748fe64
Reviewed-on: https://go-review.googlesource.com/c/go/+/237426
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The linker's asmb phase for ELF has a chunk of code that decides where
to place the .symtab and .strtab sections, which appear after after
the DWARF data; this code currently tries to align the start of the
.symtab section using the value of -R (stored in *FlagRound). This
patch gets rid of this additional alignment and instead just aligns
.symtab by pointer size. The -R value is needed for loadable
segments/sections (such as text or data), not for non-loadable
sections (e.g. symtab). On most architectures the *FlagRound value is
4k, however on ARM64 it is 64k, meaning that aligning symtab on this
boundary can waste a good chunk of space.
Change-Id: Ib51f3ad5611f5614768355eb8533084ba117a8e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/238019
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, a method of a reachable type is live if it matches a
method of a reachable interface. In fact, we only need to retain
the method if the type is actually converted to an interface. If
the type is never converted to an interface, there is no way to
call the method through an interface method call (but the type
descriptor could still be used, e.g. in calling
runtime.newobject).
A type can be used in an interface in two ways:
- directly converted to interface. (Any interface counts, as it
is possible to convert one interface to another.)
- obtained by reflection from a related type (e.g. obtaining an
interface of T from []T).
For the former, we let the compiler emit a marker on the type
descriptor symbol when it is converted to an interface. In the
linker, we only need to check methods of marked types.
For the latter, when the linker visits a marked type, it needs to
visit all its "child" types as marked (i.e. potentially could be
converted to interface).
This reduces binary size:
cmd/compile 18792016 18706096 (-0.5%)
cmd/go 14120572 13398948 (-5.1%)
Change-Id: I4465c7eeabf575f4dc84017214c610fa05ae31fd
Reviewed-on: https://go-review.googlesource.com/c/go/+/237298
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Merge conflicts are mostly recently changed nm/objdump output
format and its tests. Resolved easily (mostly just using the
format on master branch).
Change-Id: I99d8410a9a02947ecf027d9cae5762861562baf5
Instead of using container/heap package, implement a simple
specialized heap algorithm for the work queue in the deadcode
pass, to avoid allocations and function pointer calls.
Linking cmd/compile,
name old time/op new time/op delta
Deadcode_GC 59.8ms ± 4% 42.2ms ± 4% -29.45% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
Deadcode_GC 3.53MB ± 0% 2.10MB ± 0% -40.57% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
Deadcode_GC 187k ± 0% 8k ± 0% -95.48% (p=0.008 n=5+5)
Change-Id: Ibb21801d5b8e4a7eaf429856702e02720cd1772f
Reviewed-on: https://go-review.googlesource.com/c/go/+/236565
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Currently, in the deadcode pass, when checking whether a defined
method satisfies an interface, it compares the string
representation of the defined method and the interface method.
In fact, it can simply compare the method name and the type
descriptor (as we do in runtime). Make it so.
Change-Id: Ideb2b2410e5eedcd20ac31e3af41f5499fc90225
Reviewed-on: https://go-review.googlesource.com/c/go/+/236564
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Now the compiler-generated fingerprint is a hash of the export
data. We don't need to hash it ourselves in the linker. And the
linker doesn't need to read export data at all.
Fixes#33820.
Change-Id: I54bf3ebfd0f0c72aa43a352d7b2e0575dd62970d
Reviewed-on: https://go-review.googlesource.com/c/go/+/236119
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Currently, the compiler generates a fingerprint for each package,
which is used by the linker for index consistency check.
When building plugin or shared object, currently the linker also
generates a hash, by hashing the export data. At run time, when
a package is referenced by multiple DSOs, this hash is compared
to ensure consistency.
It would be good if we can unify this two hashes. This way, the
linker doesn't need to read the export data (which is intended
for the compiler only, and is not always available for the
linker). The export data hash is sufficient for both purposes.
It is consistent with the current hash geneated by the linker.
And the export data includes indices for exported symbols, so its
hash can be used to catch index mismatches.
Updates #33820.
Change-Id: I2bc0d74930746f54c683a10dfd695d50ea3f5a38
Reviewed-on: https://go-review.googlesource.com/c/go/+/236118
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Background: when compiling a function, it's possible that a local
variable will be optimized away, which could potentially degrade the
debugging experience if the compiler fails to emit DWARF information
for the variable's type. To mitigate this situation, the compiler
emits R_USETYPE relocations for the function's auto/param variables as
a signal to the linker to generate DWARF for the types in question,
even if the type is not specifically attached to a DWARF param or var.
This patch change the logic in the compiler to avoid emitting a
R_USETYPE relocation if the type in question is already referenced by
a concrete DWARF param or auto record. This cuts down on the amount of
work the linker has to do, also makes object files a bit smaller on
average (about 1% for the runtime package).
Change-Id: I4d24da458d0658edf90c5dca0bf21d5ddc3961d8
Reviewed-on: https://go-review.googlesource.com/c/go/+/234837
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Rework the code in the linker that visits DWARF subprorgam DIEs to
reduce number of symbol name instantiations and name lookups, by
making better use of relocation target symbol types.
Change-Id: Ifb2a4e24874b8c891d7fdf17dd749c3f9139157a
Reviewed-on: https://go-review.googlesource.com/c/go/+/234685
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This change splits the SDWARFINFO symbol type (a generic container of
DWARF content) into separate sub-classes. The new symbol types are
SDWARFCUINFO comp unit DIE, also CU info and CU packagename syms
SDWARFCONST constant DIE
SDWARFFCN subprogram DIE (default and concrete)
SDWARFABSFCN abstract function DIE
SDWARFTYPE type DIE
SDWARFVAR global variable DIE
Advantage of doing this: in the linker there are several places where
we have to iterate over a symbol's relocations to pick out references
to specific classes of DWARF sub-symbols (for example, looking for all
abstract function DIEs referenced by a subprogram DIE, or looking at
all the type DIEs used in a subprogram DIE). By splitting SDWARFINFO
into parts clients can now look only at the relocation target's sym
type as opposed to having to materialize the target sym name, or do a
lookup.
Change-Id: I4e0ee3216d3c8f1a78bec3d296c01e95b3d025b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/234684
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Most Go objects are compiled with known package path, so the
symbol name is already fully expanded. Nevertheless, currently
in the linker strings.Replace is called unconditionally, and most
of the time it doesn't do anything.
This CL records a per-object flag in the object file, and do the
name expansion only when the name is not expanded at compile time.
This gives small speedups for the linker. Linking cmd/compile:
name old time/op new time/op delta
Loadlib 35.1ms ± 2% 32.8ms ± 4% -6.43% (p=0.008 n=5+5)
Symtab 15.8ms ± 2% 14.0ms ± 8% -11.45% (p=0.008 n=5+5)
TotalTime 399ms ± 1% 385ms ± 2% -3.63% (p=0.008 n=5+5)
Change-Id: I735084971a051cd9be4284ad294c284cd5b545f4
Reviewed-on: https://go-review.googlesource.com/c/go/+/234490
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This deletes all sym.Symbol and sym.Reloc references. This is
certainly not complete, and there are more cleanups to do. But I
feel this makes a good first round.
Change-Id: I7621d016957f7ef114be5f0606fcb3ad6aee71c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/234097
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Currently, for the special field tracking symbol go.track.XXX,
when they are reachable, we set its type to SCONST. There is no
need to do that. Just leave it unset (as Sxxx). The symbol is
done after this point.
Change-Id: I966d80775008f7fb5d30fbc6b9e4a30ae8316b6c
Reviewed-on: https://go-review.googlesource.com/c/go/+/233998
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Use uint32 consistently for local index (this is what the object
file uses).
Use a index, instead of a pointer, to refer to the object file.
This reduces memory usage and GC work.
This reduces some allocations. Linking cmd/compile,
name old alloc/op new alloc/op delta
Loadlib_GC 19.9MB ± 0% 16.9MB ± 0% -15.33% (p=0.008 n=5+5)
name old live-B new live-B delta
Loadlib_GC 12.6M ± 0% 11.3M ± 0% -9.97% (p=0.008 n=5+5)
Change-Id: I20ce60bbb6d31abd2e9e932bdf959e2ae840ab98
Reviewed-on: https://go-review.googlesource.com/c/go/+/233779
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Remove the loader's PropagateSymbolChangesBackToLoader and
PropagateLoaderChangesToSymbols shim functions. These were used at one
point to enable conversion of phases in the linker that were
"downstream" of loadlibfull -- given the current wavefront position
there's not much point keeping them around.
Change-Id: I3f01f25b70b1b80240369c8f3a10dca89931610f
Reviewed-on: https://go-review.googlesource.com/c/go/+/233817
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Minor renaming cleanup to get rid of a couple of old sym.Symbol
adddynrel helpers and rename the current crop of adddynrel2
methods/functions back to adddynrel.
Change-Id: I67e76decff84d603ef765f3b6a0cd78c7f3743ec
Reviewed-on: https://go-review.googlesource.com/c/go/+/233523
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Adds in support for remaining architectures to the linker's ELF asmb2
path, along with deleting most of the older sym.Symbol based code.
Change-Id: I67c96525db72b7d6dd3187cf2b9f6faddc296291
Reviewed-on: https://go-review.googlesource.com/c/go/+/233362
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This patch converts the linker's Asmb2 phase to use loader APIs
for AMD64 (other architectures to be converted in a subsequent
patch).
Change-Id: I5a9aa9b03769cabc1a22b982f48fd113213d7bcf
Reviewed-on: https://go-review.googlesource.com/c/go/+/233338
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The undef pass basically double-checks the relocation targets are
defined. We already do that in the reloc pass, and for external
relocations we check that when we emit relocations. The undef pass
doesn't seem necessary.
Change-Id: Iecfa654dc014fdc6e59c624cbf5948ad65fd367a
Reviewed-on: https://go-review.googlesource.com/c/go/+/232577
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The function Abbrevs() was returning an array of structures by value,
which is not very efficient (this was showing up in a kubernetes
kubelet linker profile). Switch the function to return a slice
instead.
Improves linker DwarfGenerateDebugSyms running time when
linking the compiler in compilebench:
DwarfGenerateDebugSyms 29.2ms ±144% 23.9ms ±125% -17.89% (p=0.000 n=99+99)
Change-Id: I1132816563f208c63eb82a7932d9f2bcb2455324
Reviewed-on: https://go-review.googlesource.com/c/go/+/231558
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Add code to the loader to enforce the invariant that there is only a
single level of 'outer' symbol nesting. That is, if outer(X) = Y, then
outer(Y) is always zero.
Revise foldSubSymbolOffset based on the new invariant, allowing it to
be inlined, and then fix the various "for s.Outer != nil" loops in the
linker to just use an "if" instead of a loop.
Change-Id: Ib895702bc6de52718248f09a5368b84cb2e0a3fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/231137
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
2020-05-01 16:49:36 +00:00
961 changed files with 32415 additions and 71065 deletions
{name:"CALLstatic",argLength:1,reg:regInfo{clobbers:callerSave},aux:"SymOff",clobberFlags:true,call:true,symEffect:"None"},// call static function aux.(*obj.LSym). arg0=mem, auxint=argsize, returns mem
@@ -498,16 +498,16 @@ func init() {
// auxint = offset into duffzero code to start executing
// returns mem
// R20 changed as side effect
// R16 and R17 may be clobbered by linker trampoline.
{
name:"DUFFZERO",
aux:"Int64",
argLength:2,
reg:regInfo{
inputs:[]regMask{buildReg("R20")},
clobbers:buildReg("R16 R17 R20 R30"),
clobbers:buildReg("R20 R30"),
},
faultOnNilArg0:true,
unsafePoint:true,// FP maintenance around DUFFZERO can be clobbered by interrupts
},
// large zeroing
@@ -538,17 +538,17 @@ func init() {
// auxint = offset into duffcopy code to start executing
// returns mem
// R20, R21 changed as side effect
// R16 and R17 may be clobbered by linker trampoline.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
