In nat.divLarge (having signature (z nat).divLarge(u, uIn, v nat)),
we check whether z aliases uIn or v, but aliasing is currently not
checked for the u parameter.
Unfortunately, z and u aliasing each other can in some cases cause
errors in the computation.
The q return parameter (which will hold the result's quotient), is
unconditionally initialized as
q = z.make(m + 1)
When cap(z) ≥ m+1, z.make() will reuse z's backing array, causing q
and z to share the same backing array. If then z aliases u, setting q
during the quotient computation will then corrupt u, which at that
point already holds computation state.
To fix this, we add an alias(z, u) check at the beginning of the
function, taking care of aliasing the same way we already do for uIn
and v.
Fixes#22830
Change-Id: I3ab81120d5af6db7772a062bb1dfc011de91f7ad
Reviewed-on: https://go-review.googlesource.com/78995
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-on: https://go-review.googlesource.com/89156
Run-TryBot: Andrew Bonventre <andybons@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
DUFFZERO on 386 is not marked as clobbering flags, but rewriteToUseGot rewrote
"ADUFFZERO $offset" to "MOVL runtime.duffxxx@GOT, CX; ADDL $offset, CX; CALL CX"
which does. Luckily the fix is easier than figuring out what the problem was:
replace the ADDL $offset, CX with LEAL $offset(CX), CX.
On amd64 DUFFZERO clobbers flags, on arm, arm64 and ppc64 ADD does not clobber
flags and s390x does not use the duff functions, so I'm fairly confident this
is the only fix required.
I don't know how to write a test though.
Change-Id: I69b0958f5f45771d61db5f5ecb4ded94e8960d4d
Reviewed-on: https://go-review.googlesource.com/41821
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-on: https://go-review.googlesource.com/70871
Run-TryBot: Russ Cox <rsc@golang.org>
When using golang on ppc64le there have been issues
when building executables that generate extremely large text
sections. This is due to the call instruction and the limitation
on the offset field, which is smaller than most platforms. If the
size of the call target offset is too big for the offset field in
the call instruction, then link errors can occur.
The original solution to this problem in golang was to split the
text section when it became too large, allowing the external (GNU)
linker to insert the necessary stub to handle the long call. That
worked fine until the another size limit for the program size was hit,
where a plt_branch was created instead of a long branch. In that case
the plt_branch code sequence expects r2 to contain the address of the
TOC, but when golang creates dynamic executables by default
(-buildmode=exe) r2 does not always contain the address of the TOC
and as a result when building programs that reach this extremely
large size, a runtime SEGV or SIGILL can occur due to branching to a bad
address.
When using internal linking, trampolines are generated to handle the
long calls but the text sections are not split. With this change,
text sections will still be split approrpriately with external linking
but if the buildmode being used does not maintain r2 as the TOC
addresses, then trampolines will be created for those calls.
Fixes#20497
Change-Id: If5400b0f86c2c08e106b332be6db0b259b07d93d
Reviewed-on: https://go-review.googlesource.com/45130
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-on: https://go-review.googlesource.com/70837
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
More generally I'm concerned about these tests using
$GOROOT/src/cmd/go as scratch space, especially
combined wtih tg.parallel() - it's easy to believe some other
test might inadvertently also try to write x.exe about the
same time. This CL only solves the "didn't clean up x.exe"
problem and leaves for another day the "probably shouldn't
write to cmd/go at all" problem.
Fixes#22266.
Change-Id: I651534d70e2d360138e0373fb4a316081872550b
Reviewed-on: https://go-review.googlesource.com/71410
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-on: https://go-review.googlesource.com/71490
On an iPhone 6 running iOS 11, the TestDialerDualStackFDLeak test
started failing with dial durations just above the limit:
FAIL: TestDialerDualStackFDLeak (0.21s)
dial_test.go:90: got 101.154ms; want <= 95ms
Bump the timeout on iOS.
For the iOS builder.
Change-Id: Id42b471e7cf7d0c84f6e83ed04b395fa1a2d449d
Reviewed-on: https://go-review.googlesource.com/66491
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-on: https://go-review.googlesource.com/71330
Run-TryBot: Russ Cox <rsc@golang.org>
Replacing byteload-of-bytestore-of-x with x is incorrect
when x contains a larger-than-byte value (and so on for
16 and 32-bit load/store pairs). Replace "x" with the
appropriate zero/sign extension of x, which if unnecessary
will be repaired by other rules.
Made logic for arm match x86 and amd64; yields minor extra
optimization, plus I am (much) more confident it's correct,
despite inability to reproduce bug on arm.
Ppc64 lacks this optimization, hence lacks this problem.
See related https://golang.org/cl/37154/Fixes#20530.
[Merge conflicts in generated rewrite files resolved by
regenerating from scratch, using the programs in ssa/gen.]
Change-Id: I6af9cac2ad43bee99cafdcb04725ce7e55a43323
Reviewed-on: https://go-review.googlesource.com/44355
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-on: https://go-review.googlesource.com/70841
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
If go doesn't have permission to run strace, this test hangs while
waiting for strace to run. Instead try invoking strace with
Run() first - on fail skip and report error, otherwise run
the test normally using strace.
Also fix link to open mips64 issue in same test.
Fixes#9711
Change-Id: Ibbc5fbb143ea6d0f8b6cfdca4b385ef4c8960b3d
Reviewed-on: https://go-review.googlesource.com/38633
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-on: https://go-review.googlesource.com/72170
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Keith pointed out that these rules should zero extend during the review
of CL 36845. In practice the generic rules are responsible for eliminating
most load-hit-stores and they do not have this problem. When the s390x
rules are triggered any cast following the elided load-hit-store is
kept because of the sequence the rules are applied in (i.e. the load is
removed before the zero extension gets a chance to be merged into the load).
It is therefore not clear that this issue results in any functional bugs.
This CL includes a test, but it only tests the generic rules currently.
Change-Id: Idbc43c782097a3fb159be293ec3138c5b36858ad
Reviewed-on: https://go-review.googlesource.com/37154
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-on: https://go-review.googlesource.com/70831
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
PlainAuth originally refused to send passwords to non-TLS servers
and was documented as such.
In 2013, issue #5184 was filed objecting to the TLS requirement,
despite the fact that it is spelled out clearly in RFC 4954.
The only possibly legitimate use case raised was using PLAIN auth
for connections to localhost, and the suggested fix was to let the
server decide: if it advertises that PLAIN auth is OK, believe it.
That approach was adopted in CL 8279043 and released in Go 1.1.
Unfortunately, this is exactly wrong. The whole point of the TLS
requirement is to make sure not to send the password to the wrong
server or to a man-in-the-middle. Instead of implementing this rule,
CL 8279043 blindly trusts the server, so that if a man-in-the-middle
says "it's OK, you can send me your password," PlainAuth does.
And the documentation was not updated to reflect any of this.
This CL restores the original TLS check, as required by RFC 4954
and as promised in the documentation for PlainAuth.
It then carves out a documented exception for connections made
to localhost (defined as "localhost", "127.0.0.1", or "::1").
Cherry-pick of CL 68170.
Change-Id: I1d3729bbd33aa2f11a03f4c000e6bb473164957b
Reviewed-on: https://go-review.googlesource.com/68023
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
We shouldn't move a spill to a loop exit where the spill itself
is dead. The stack location assigned to the spill might already
be reused by another spill at this point.
The case we previously handled incorrectly is the one where the value
being spilled is still live, but the spill itself is dead.
Fixes#20472
Patching directly on the release branch because the spill moving code has
already been rewritten for 1.9. (And it doesn't have this bug.)
Change-Id: I26c5273dafd98d66ec448750073c2b354ef89ad6
Reviewed-on: https://go-review.googlesource.com/44033
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This is a redo of CL 41076 backported to the 1.8 release branch.
There were major conflicts, so I had to basically rewrite it again
from scratch. The way Progs are allocated changed. Liveness analysis
and Prog generation got reordered. Liveness analysis changed from
running on gc.BasicBlock to ssa.Block. All that makes the logic quite
a bit different.
Please review carefully.
From CL 41076:
At VARKILLs, zero a variable if it is ambiguously live.
After the VARKILL anything this variable references
might be collected. If it were to become live again later,
the GC will see references to already-collected objects.
We don't know a variable is ambiguously live until very
late in compilation (after lowering, register allocation, ...),
so it is hard to generate the code in an arch-independent way.
We also have to be careful not to clobber any registers.
Fortunately, this almost never happens so performance is ~irrelevant.
There are only 2 instances where this triggers in the stdlib.
Fixes#20029
Change-Id: Ibb757eec58ee07f40df5e561b19d315684dc4bda
Reviewed-on: https://go-review.googlesource.com/43998
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Android O black-lists the select system call because its libc, Bionic,
does not use this system call. Replace our use of select with pselect6
(which is allowed) on the platforms that support targeting Android.
linux/arm64 already uses pselect6 because there is no select on arm64,
so only linux/amd64 and linux/arm need changing. pselect6 has been
available since Linux 2.6.16, which is before Go's minimum
requirement.
Fixes#20409.
Change-Id: Ic526b5b259a9e01d2f145a1f4d2e76e8c49ce809
Reviewed-on: https://go-review.googlesource.com/43641
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
(cherry picked from commit 4dcba023c6)
Reviewed-on: https://go-review.googlesource.com/44001
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
On s390x unsigned integer comparisons with immediates require the immediate
to be an unsigned 32-bit integer. The rule was checking that the immediate
was a signed 32-bit integer.
This CL also adds a test for comparisons that could be turned into compare
with immediate or equivalent instructions (depending on architecture and
optimizations applied).
Cherry-pick of CL 40433 and CL 40873.
Fixes#19940.
Reviewed-on: https://go-review.googlesource.com/40931
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change-Id: I3daaeaa40d7637bd4421e6b8d37ea4ffd74448ce
Reviewed-on: https://go-review.googlesource.com/43994
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Cherry-pick of CL 43870.
If mheap.sysAlloc doesn't have room in the heap arena for an
allocation, it will attempt to map more address space with sysReserve.
sysReserve is given a hint, but can return any unused address range.
Currently, mheap.sysAlloc incorrectly assumes the returned region will
never fall between arena_start and arena_used. If it does,
mheap.sysAlloc will blindly accept the new region as the new
arena_used and arena_end, causing these to decrease and make it so any
Go heap above the new arena_used is no longer considered part of the
Go heap. This assumption *used to be* safe because we had all memory
between arena_start and arena_used mapped, but when we switched to an
arena_start of 0 on 32-bit, it became no longer safe.
Most likely, we've only recently seen this bug occur because we
usually start arena_used just above the binary, which is low in the
address space. Hence, the kernel is very unlikely to give us a region
before arena_used.
Since mheap.sysAlloc is a linear allocator, there's not much we can do
to handle this well. Hence, we fix this problem by simply rejecting
the new region if it isn't after arena_end. In this case, we'll take
the fall-back path and mmap a small region at any address just for the
requested memory.
Fixes#20259.
Change-Id: Ib72e8cd621545002d595c7cade1e817cfe3e5b1e
Reviewed-on: https://go-review.googlesource.com/43954
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
Cherry-pick of CL 43294.
Tuple ops are weird. They are essentially a pair of ops,
one which consumes a mem and one which generates a mem (the Select1).
The schedule pass didn't handle these quite right.
Fix the scheduler to include both parts of the paired op in
the store chain. That makes sure that loads are correctly ordered
with respect to the first of the pair.
Add a check for the ssacheck builder, that there is only one
live store at a time. I thought we already had such a check, but
apparently not...
Fixes#20335
Change-Id: I59eb3446a329100af38d22820b1ca2190ca46a78
Reviewed-on: https://go-review.googlesource.com/43411
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Cherry-pick of CL 43311.
runtime.gchelper depends on the non-atomic load of work.ndone
happening strictly before the atomic add of work.nwait. Until very
recently (commit 978af9c2db, fixing #20334), the compiler reordered
these operations. This created a race since work.ndone can change as
soon as work.nwait is equal to work.ndone. If that happened, more than
one gchelper could attempt to wake up the work.alldone note, causing a
"double wakeup" panic.
This was fixed in the compiler, but to make this code less subtle,
make the load of work.ndone atomic. This clearly forces the order of
these operations, ensuring the race doesn't happen.
Fixes#19305 (though really 978af9c2db fixed it).
Change-Id: Ieb1a84e1e5044c33ac612c8a5ab6297e7db4c57d
Reviewed-on: https://go-review.googlesource.com/43412
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The uintptr-typed Data field in reflect.SliceHeader and
reflect.StringHeader needs special treatment because it is
really a pointer. Add the special treatment in walk for
bug #19168 to escape analysis.
Includes extra debugging that was helpful.
Fixes#19743.
Change-Id: I6dab5002f0d436c3b2a7cdc0156e4fc48a43d6fe
Reviewed-on: https://go-review.googlesource.com/39616
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Fixes#19168.
(*state).insertWBstore needed to be tweaked for backporting so that
store reflect.{Slice,String}Header.Data stores still fallthrough and
end the SSA block. This wasn't necessary at master because of CL
36834.
Change-Id: I3f4fcc0b189c53819ac29ef8de86fdad76a17488
Reviewed-on: https://go-review.googlesource.com/39615
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TestDWARF has been added in CL 38855. This test is
failing on Plan 9 because executables don't have
a DWARF symbol table.
Fixes#19793.
(This fixes Plan 9 failures on the release branch introduced by
cherry-pick CL 39605.)
Change-Id: I7fc547a7c877b58cc4ff6b4eb5b14852e8b4668b
Reviewed-on: https://go-review.googlesource.com/39611
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Consider this struct, which expects an attribute A and a child C both ints:
type X struct {
XMLName xml.Name `xml:"X"`
A int `xml:",attr"`
C int
}
Go 1.2 through Go 1.7 were consistent: attributes unchecked,
children strictly checked:
$ go1.7 run /tmp/x.go
<X></X> ok
<X A=""></X> ok
<X A="bad"></X> ok
<X></X> ok
<X><C></C></X> ERROR strconv.ParseInt: parsing "": invalid syntax
<X><C/></X> ERROR strconv.ParseInt: parsing "": invalid syntax
<X><C>bad</C></X> ERROR strconv.ParseInt: parsing "bad": invalid syntax
$
Go 1.8 made attributes strictly checked, matching children:
$ go1.8 run /tmp/x.go
<X></X> ok
<X A=""></X> ERROR strconv.ParseInt: parsing "": invalid syntax
<X A="bad"></X> ERROR strconv.ParseInt: parsing "bad": invalid syntax
<X></X> ok
<X><C></C></X> ERROR strconv.ParseInt: parsing "": invalid syntax
<X><C/></X> ERROR strconv.ParseInt: parsing "": invalid syntax
<X><C>bad</C></X> ERROR strconv.ParseInt: parsing "bad": invalid syntax
$
but this broke XML code that had empty attributes (#19333).
In Go 1.9 we plan to start allowing empty children (#13417).
The fix for that will also make empty attributes work again:
$ go run /tmp/x.go # Go 1.9 development
<X></X> ok
<X A=""></X> ok
<X A="bad"></X> ERROR strconv.ParseInt: parsing "bad": invalid syntax
<X></X> ok
<X><C></C></X> ok
<X><C/></X> ok
<X><C>bad</C></X> ERROR strconv.ParseInt: parsing "bad": invalid syntax
$
For Go 1.8.1, we want to restore the empty attribute behavior
to match Go 1.7 but not yet change the child behavior as planned for Go 1.9,
since that change hasn't been through release testing.
Instead, restore the more lax Go 1.7 behavior, so that XML files
with empty attributes will not be broken until Go 1.9:
$ go run /tmp/x.go # after this CL
<X></X> ok
<X A=""></X> ok
<X A="bad"></X> ok
<X></X> ok
<X><C></C></X> ERROR strconv.ParseInt: parsing "": invalid syntax
<X><C/></X> ERROR strconv.ParseInt: parsing "": invalid syntax
<X><C>bad</C></X> ERROR strconv.ParseInt: parsing "bad": invalid syntax
$
Fixes#19333.
Change-Id: I3d38ebd2509f5b6ea3fd4856327f887f9a1a8085
Reviewed-on: https://go-review.googlesource.com/39607
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Sarah Adams <shadams@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
reflect.callReflect heap-allocates a stack frame and then constructs
pointers to the arguments and result areas of that frame. However, if
there are no results, the results pointer will point past the end of
the frame allocation. If there are also no arguments, the arguments
pointer will also point past the end of the frame allocation. If the
GC observes either these pointers, it may panic.
Fix this by not constructing these pointers if these areas of the
frame are empty.
This adds a test of calling no-argument/no-result methods via reflect,
since nothing in std did this before. However, it's quite difficult to
demonstrate the actual failure because it depends on both exact
allocation patterns and on GC scanning the goroutine's stack while
inside one of the typedmemmovepartial calls.
I also audited other uses of typedmemmovepartial and
memclrNoHeapPointers in reflect, since these are the most susceptible
to this. These appear to be the only two cases that can construct
out-of-bounds arguments to these functions.
Fixes#19724.
Fixes#19768 (backport).
Change-Id: I4b83c596b5625dc4ad0567b1e281bad4faef972b
Reviewed-on: https://go-review.googlesource.com/39604
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Right now, at least with Xcode 8.3, we invoke dsymutil and dutifully
copy what it produces back into the binary, but it has actually dropped
all the DWARF information that we wanted, because it didn't like
the look of go.o.
Make it like the look of go.o.
DWARF is tested in other ways, but typically indirectly and not for cgo programs.
Add a direct test, and one that exercises cgo.
This detects missing dwarf information in cgo-using binaries on macOS,
at least with Xcode 8.3, and possibly earlier versions as well.
Fixes#19772.
The backport to Go 1.8 disables TestDWARF on Windows because Windows
DWARF support is new in Go 1.9.
Change-Id: I0082e52c0bc8fc4e289770ec3dc02f39fd61e743
Reviewed-on: https://go-review.googlesource.com/39605
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Without this, the load fails during kernel exec, which results in the
mysterious and completely uninformative "Killed: 9" error.
It appears that the stars (or at least the inputs) were properly aligned
with earlier versions of Xcode so that this happened accidentally.
Make it happen on purpose.
Gregory Man bisected the breakage to this change in LLVM,
which fits the theory nicely:
https://github.com/llvm-mirror/llvm/commit/9a41e59cFixes#19734.
Change-Id: Ice67a09af2de29d3c0d5e3fcde6a769580897c95
Reviewed-on: https://go-review.googlesource.com/39603
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Might as well provide a way around the mach-o munging
that doesn't require stripping all symbols.
After all, -w does mean no DWARF.
For #11887, #19734, and anyone else that needs to disable
this code path without losing the symbol table.
Change-Id: I254b7539f97fb9211fa90f446264b383e7f3980f
Reviewed-on: https://go-review.googlesource.com/39602
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, when printing tracebacks of other threads during
GOTRACEBACK=crash, if the thread is on the system stack we print only
the header for the user goroutine and fail to print its stack. This
happens because we passed the g0 to traceback instead of curg. The g0
never has anything set in its gobuf, so traceback doesn't print
anything.
Fix this by passing _g_.m.curg to traceback instead of the g0.
Fixes#19494.
Fixes#19637 (backport).
Change-Id: Idfabf94d6a725e9cdf94a3923dead6455ef3b217
Reviewed-on: https://go-review.googlesource.com/39600
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The assembler back end uses F15 as a temporary register in these
instructions.
Checked the assembler back end and made sure that this is the
only case clobbering F15.
Fixes#19403.
Change-Id: I02b9e00fdd9229db899f501c8e9b306e02912d83
Reviewed-on: https://go-review.googlesource.com/39598
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Removing stray xori that came from big endian copy/paste.
Adding atomicand8 check to runtime.check() that would have revealed
this error.
Might fix#19396.
Change-Id: If8d6f25d3e205496163541eb112548aa66df9c2a
Reviewed-on: https://go-review.googlesource.com/39597
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The loop-A-encloses-loop-C code did not properly handle the
case where really C was already known to be enclosed by B,
and A was nearest-outer to B, not C.
Fixes#19217.
Change-Id: I755dd768e823cb707abdc5302fed39c11cdb34d4
Reviewed-on: https://go-review.googlesource.com/39596
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Added a flag to generic and various architectures' atomic
operations that are judged to have observable side effects
and thus cannot be dead-code-eliminated.
Test requires GOMAXPROCS > 1 without preemption in loop.
Fixes#19182.
Change-Id: Id2230031abd2cca0bbb32fd68fc8a58fb912070f
Reviewed-on: https://go-review.googlesource.com/39595
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Go 1.7 and earlier rejected these images with chunkOrderError.
Go 1.8 panicked during decoding.
Go 1.9 will handle them successfully.
Make Go 1.8.1 match Go 1.7 and earlier, to remove the panic
without introducing new functionality in a minor release.
Fixes#19553.
Change-Id: I3c73a27aa3932300326273b6b563cdf606f3ab64
Reviewed-on: https://go-review.googlesource.com/39593
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The aLongTimeAgo time value in net and net/http is used to cancel
in-flight read and writes. It was set to time.Unix(233431200, 0)
which seemed like far enough in the past.
But Raspberry Pis, lacking a real time clock, had to spoil the fun and
boot in 1970 at the Unix epoch time, breaking assumptions in net and
net/http.
So change aLongTimeAgo to time.Unix(1, 0), which seems like the
earliest safe value. I don't trust subsecond values on all operating
systems, and I don't trust the Unix zero time. The Raspberry Pis do
advance their clock at least. And the reported problem was that Hijack
on a ResponseWriter hung forever, waiting for the connection read
operation to finish. So now, even if kernel + userspace boots in under
a second (unlikely), the Hijack will just have to wait for up to a
second.
Updates #19747Fixes#19771 (backport to Go 1.8.x)
Change-Id: Id59430de2e7b5b5117d4903a788863e9d344e53a
Reviewed-on: https://go-review.googlesource.com/38785
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
(cherry picked from commit e83fc2e44336423dab94bfe74fad4c4e6a4703b3)
Reviewed-on: https://go-review.googlesource.com/38786
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Scheduling values after calls to selectrecv,
will cause them to be executed multiple times, due to runtime.selectgo
jumping to the next instruction in the selectrecv basic block.
Prevent this by scheduling calls to selectrecv as late as possible
Fixes#19201
Change-Id: I6415792e2c465dc6d9bd6583ba1e54b107bcf5cc
Reviewed-on: https://go-review.googlesource.com/38587
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Previously call stubs were generated and inserted in
Textp after much of the text, resulting in calls too
far in some cases. This puts the call stubs first, which
in many cases makes some calls not so far, but also
enables trampolines to be generated when necessary.
This is a backport for go 1.8 based on CL38131.
Fixes#19578
Change-Id: If3ba3d5222a7f7969ed2de1df4854a1b4a80a0f0
Reviewed-on: https://go-review.googlesource.com/38472
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A type conversion inserted between MOVD{LT,LE,GT,GE,EQ,NE} and CMPWconst
by CL 36256 broke the rewrite rule designed to merge the two.
This results in simple for loops (e.g. for i := 0; i < N; i++ {})
emitting two comparisons instead of one, plus a conditional move.
This CL explicitly types the input to CMPWconst so that the type conversion
can be omitted. It also adds a test to check that conditional moves aren't
emitted for loops with 'less than' conditions (i.e. i < N) on s390x.
Fixes#19227.
Change-Id: I44958eebf6c74c5819b2a9511caf3c47c20fbf45
Reviewed-on: https://go-review.googlesource.com/37536
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Some rules insert MOVDreg ops to ensure that type changes are kept.
If there is no type change (or the input is constant) then the MOVDreg
can be omitted, allowing further optimization.
Reduces the size of the .text section in the asm tool by ~33KB.
For #19227.
Change-Id: I0f7b40d8dbcda73bca96eb6d2bf13f9ffa88f4b6
Reviewed-on: https://go-review.googlesource.com/37535
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Contention profiling is off by default.
If you turn it on, it has the unfortunate effect of making
the wakeup on a contention mutex go from O(1) to O(n).
Change it back to O(1).
This is already fixed in essentially the same way on master;
master also contains some fixes for the non-profiling code
paths.
Possible for Go 1.8.1.
Change-Id: Iaa644c06e20ca28da4dfa348b7211eedb657e0ba
Reviewed-on: https://go-review.googlesource.com/37341
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We have seen one instance of a production job suddenly spinning to
100% CPU and becoming unresponsive. In that one instance, a SIGQUIT
was sent after 328 minutes of spinning, and the stacks showed a single
goroutine in "IO wait (scan)" state.
Looking for things that might get stuck if a goroutine got stuck in
scanning a stack, we found that injectglist does:
lock(&sched.lock)
var n int
for n = 0; glist != nil; n++ {
gp := glist
glist = gp.schedlink.ptr()
casgstatus(gp, _Gwaiting, _Grunnable)
globrunqput(gp)
}
unlock(&sched.lock)
and that casgstatus spins on gp.atomicstatus until the _Gscan bit goes
away. Essentially, this code locks sched.lock and then while holding
sched.lock, waits to lock gp.atomicstatus.
The code that is doing the scan is:
if castogscanstatus(gp, s, s|_Gscan) {
if !gp.gcscandone {
scanstack(gp, gcw)
gp.gcscandone = true
}
restartg(gp)
break loop
}
More analysis showed that scanstack can, in a rare case, end up
calling back into code that acquires sched.lock. For example:
runtime.scanstack at proc.go:866
calls runtime.gentraceback at mgcmark.go:842
calls runtime.scanstack$1 at traceback.go:378
calls runtime.scanframeworker at mgcmark.go:819
calls runtime.scanblock at mgcmark.go:904
calls runtime.greyobject at mgcmark.go:1221
calls (*runtime.gcWork).put at mgcmark.go:1412
calls (*runtime.gcControllerState).enlistWorker at mgcwork.go:127
calls runtime.wakep at mgc.go:632
calls runtime.startm at proc.go:1779
acquires runtime.sched.lock at proc.go:1675
This path was found with an automated deadlock-detecting tool.
There are many such paths but they all go through enlistWorker -> wakep.
The evidence strongly suggests that one of these paths is what caused
the deadlock we observed. We're running those jobs with
GOTRACEBACK=crash now to try to get more information if it happens
again.
Further refinement and analysis shows that if we drop the wakep call
from enlistWorker, the remaining few deadlock cycles found by the tool
are all false positives caused by not understanding the effect of calls
to func variables.
The enlistWorker -> wakep call was intended only as a performance
optimization, it rarely executes, and if it does execute at just the
wrong time it can (and plausibly did) cause the deadlock we saw.
Comment it out, to avoid the potential deadlock.
Fixes#19112.
Unfixes #14179.
Change-Id: I6f7e10b890b991c11e79fab7aeefaf70b5d5a07b
Reviewed-on: https://go-review.googlesource.com/37093
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-on: https://go-review.googlesource.com/37022
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change removes the punitive language and anonymous reporting mechanism
from the Code of Conduct document. Read on for the rationale.
More than a year has passed since the Go Code of Conduct was introduced.
In that time, there have been a small number (<30) of reports to the Working Group.
Some reports we handled well, with positive outcomes for all involved.
A few reports we handled badly, resulting in hurt feelings and a bad
experience for all involved.
On reflection, the reports that had positive outcomes were ones where the
Working Group took the role of advisor/facilitator, listening to complaints and
providing suggestions and advice to the parties involved.
The reports that had negative outcomes were ones where the subject of the
report felt threatened by the Working Group and Code of Conduct.
After some discussion among the Working Group, we saw that we are most
effective as facilitators, rather than disciplinarians. The various Go spaces
already have moderators; this change to the CoC acknowledges their authority
and places the group in a purely advisory role. If an incident is
reported to the group we may provide information to or make a
suggestion the moderators, but the Working Group need not (and should not) have
any authority to take disciplinary action.
In short, we want it to be clear that the Working Group are here to help
resolve conflict, period.
The second change made here is the removal of the anonymous reporting mechanism.
To date, the quality of anonymous reports has been low, and with no way to
reach out to the reporter for more information there is often very little we
can do in response. Removing this one-way reporting mechanism strengthens the
message that the Working Group are here to facilitate a constructive dialogue.
Change-Id: Iee52aff5446accd0dae0c937bb3aa89709ad5fb4
Reviewed-on: https://go-review.googlesource.com/37014
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-on: https://go-review.googlesource.com/37040
Reviewed-by: Chris Broadfoot <cbro@golang.org>
The new tests in this CL have been checked against Go 1.7 as well
and all pass in Go 1.7, with the one exception noted in a comment
(an intentional change to omitempty already present before this CL).
CL 15684 made the intentional change to omitempty.
This CL fixes bugs introduced along the way.
Most of these are corner cases that are arguably not that important,
but they've always worked all the way back to Go 1, and someone
cared enough to file #19063. The most significant problem found
while adding tests is that in the case of a nil *string field with
`xml:",chardata"`, the existing code silently stops processing not just
that field but the entire remainder of the struct.
Even if #19063 were not worth fixing, this chardata bug would be.
Fixes#19063.
Change-Id: I318cf8f9945e1a4615982d9904e109fde577ebf9
Reviewed-on: https://go-review.googlesource.com/36954
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
(cherry picked from commit 72aa757ddd)
Reviewed-on: https://go-review.googlesource.com/37016
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Previously if a connection was requested but timed out during the
request and when acquiring the db.Lock the connection request
is fulfilled and the request is unable to be returned to the
connection pool, then then driver connection would not be closed.
No tests were added or modified because I was unable to determine
how to trigger this situation without something invasive.
Change-Id: I9d4dc680e3fdcf63d79d212174a5b8b313f363f1
Reviewed-on: https://go-review.googlesource.com/36641
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-on: https://go-review.googlesource.com/36714
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously if a context was canceled while it was waiting for a
connection request, that connection request would leak.
To prevent this remove the pending connection request if the
context is canceled and ensure no connection has been sent on the channel.
This requires a change to how the connection requests are represented in the DB.
Fixes#18995
Change-Id: I9a274b48b8f4f7ca46cdee166faa38f56d030852
Reviewed-on: https://go-review.googlesource.com/36563
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-on: https://go-review.googlesource.com/36613
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously it was intended that Rows.Scan would return
an error and Rows.Err would return nil. This was problematic
because drivers could not differentiate between a normal
Rows.Close or a context cancel close.
The alternative is to require drivers to return a Scan to return
an error if the driver is closed while there are still rows to be read.
This is currently not how several drivers currently work and may be
difficult to detect when there are additional rows.
At the same time guard the the Rows.lasterr and prevent a close
while a Rows operation is active.
For the drivers that do not have Context methods, do not check for
context cancelation after the operation, but before for any operation
that may modify the database state.
Fixes#18961
Change-Id: I49a25318ecd9f97a35d5b50540ecd850c01cfa5e
Reviewed-on: https://go-review.googlesource.com/36485
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-on: https://go-review.googlesource.com/36614
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We added CentOS 7's /etc/pki/ca-trust/extracted/pem/tls-ca-bundle.pem
to the list in response to #17549 - not being able to find any certs otherwise.
Now we have #18813, where CentOS 6 apparently has both that file
and /etc/pki/tls/certs/ca-bundle.crt, and the latter is complete while
the former is not.
Moving the new CentOS 7 file to the bottom of the list should fix both
problems: the CentOS 7 system that didn't have any of the other files
in the list will still find the new one, and existing systems will still
keep using what they were using instead of preferring the new path
that may or may not be complete on some systems.
Fixes#18813.
Change-Id: I5275ab67424b95e7210e14938d3e986c8caee0ba
Reviewed-on: https://go-review.googlesource.com/36429
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-on: https://go-review.googlesource.com/36530
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The compiler did not emit write barrier for assigning global with
struct literal, like global = T{} where T contains pointer.
The relevant code path is:
walkexpr OAS var_ OSTRUCTLIT
oaslit
anylit OSTRUCTLIT
walkexpr OAS var_ nil
return without adding write barrier
return true
break (without adding write barrier)
This CL makes oaslit not apply to globals. See also CL
https://go-review.googlesource.com/c/36355/ for an alternative
fix.
The downside of this is that it generates static data for zeroing
struct now. Also this only covers global. If there is any lurking
bug with implicit zeroing other than globals, this doesn't fix.
Fixes#18956.
Change-Id: Ibcd27e4fae3aa38390ffa94a32a9dd7a802e4b37
Reviewed-on: https://go-review.googlesource.com/36410
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
(cherry picked from commit 160914e33c)
Reviewed-on: https://go-review.googlesource.com/36531
This CL fixes two issues:
1. Load ops were initially always lowered to unsigned loads, even
for signed types. This was fine by itself however LoadReg ops
(used to re-load spilled values) were lowered to signed loads
for signed types. This meant that spills could invalidate
optimizations that assumed the original unsigned load.
2. Types were not always being maintained correctly through rules
designed to eliminate unnecessary zero and sign extensions.
Updates #18906 and fixes#18958 (backport of CL 36256 to 1.8).
Change-Id: Id44953b0f644cad047e8474edbd24e8a344ca9a7
Reviewed-on: https://go-review.googlesource.com/36350
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
After this, we will merge some of the dev work like
type aliases and inlining into master, so any additional
changes for the Go 1.8 release will need to be cherry-picked,
not merged.
3e55059f cmd/dist: really skip the testsanitizers tests on Android
09496599 runtime: add explicit (void) in C to avoid GCC 7 problem
4cffe2b6 cmd/dist: use the target GOOS to skip the test for issue 18153
6bdb0c11 doc: update go1.8 release notes after TxOptions change
09096bd3 cmd/go: update alldocs after CL 35150
96ea0918 cmd/compile: use CMPWU for 32-bit or smaller unsigned Geq on ppc64{,le}
21a8db1c doc: document go1.7.5
Change-Id: I9e6a30c3fac43d4d4d15e93054ac00964c3ee958
The test.bash script in misc/cgo/testsanitizers use GOOS, not GOHOSTOS.
Fix the dist check from gohostos to goos accordingly.
The error was masked on the builders because they run on a darwin host
where the sanitizers tests never ran.
With this change, the Android test suite completes successfully on
Android/amd64.
Change-Id: Id7690429f78c6ac7a26fc9118d913b719b565bb2
Reviewed-on: https://go-review.googlesource.com/35959
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This avoids errors like
./traceback.go:80:2: call of non-function C.f1
I filed https://gcc.gnu.org/PR79289 for the GCC problem. I think this
is a bug in GCC, and it may be fixed before the final GCC 7 release.
This CL is correct either way.
Fixes#18855.
Change-Id: I0785a7b7c5b1d0ca87b454b5eca9079f390fcbd4
Reviewed-on: https://go-review.googlesource.com/35919
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Author of CL 35150 forgot to run mkalldocs.sh to update
the autogenerated alldocs.go
Change-Id: Ib824562db6044702456a221a8c6f9af412927a98
Reviewed-on: https://go-review.googlesource.com/35952
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
78860b2ad2 cmd/go: don't reject ./... matching top-level file outside GOPATH
2b283cedef database/sql: fix race when canceling queries immediately
1cf08182f9 go/printer: fix format with leading comments in composite literal
b531eb3062 runtime: reorder modules so main.main comes first
165cfbc409 database/sql: let tests wait for db pool to come to expected state
ea73649343 doc: update gccgo docs
1db16711f5 doc: clarify what to do with Go 1.4 when installing from source
3717b429f2 doc: note that plugins are not fully baked
98842cabb6 net/http: don't send body on redirects for 301, 302, 303 when GetBody is set
314180e7f6 net/http: fix a nit
aad06da2b9 cmd/link: mark DWARF function symbols as reachable
be9dcfec29 doc: mention testing.MainStart signature change
a96e117a58 runtime: amd64, use 4-byte ops for memmove of 4 bytes
4cce27a3fa cmd/compile: fix constant propagation through s390x MOVDNE instructions
1be957d703 misc/cgo/test: pass current environment to syscall.Exec
ec654e2251 misc/cgo/test: fix test when using GCC 7
256a605faa cmd/compile: don't use nilcheck information until the next block
e8d5989ed1 cmd/compile: fix compilebench -alloc
ea7d9e6a52 runtime: check for nil g and m in msanread
Change-Id: I61d508d4f0efe4b72e7396645c8ad6088d2bfa6e
Previously the following could happen, though in practice it would
be rare.
Goroutine 1:
(*Tx).QueryContext begins a query, passing in userContext
Goroutine 2:
(*Tx).awaitDone starts to wait on the context derived from the passed in context
Goroutine 1:
(*Tx).grabConn returns a valid (*driverConn)
The (*driverConn) passes to (*DB).queryConn
Goroutine 3:
userContext is canceled
Goroutine 2:
(*Tx).awaitDone unblocks and calls (*Tx).rollback
(*driverConn).finalClose obtains dc.Mutex
(*driverConn).finalClose sets dc.ci = nil
Goroutine 1:
(*DB).queryConn obtains dc.Mutex in withLock
ctxDriverPrepare accepts dc.ci which is now nil
ctxCriverPrepare panics on the nil ci
The fix for this is to guard the Tx methods with a RWLock
holding it exclusivly when closing the Tx and holding a read lock
when executing a query.
Fixes#18719
Change-Id: I37aa02c37083c9793dabd28f7f934a1c5cbc05ea
Reviewed-on: https://go-review.googlesource.com/35550
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This fix is less pervasive than it seems. The only change affecting
formatting is on printer.go:760. The remaining changes have no effect
on formatting since the value of p.level is ignored except on this
specific line.
The remaining changes are:
- renamed adjBlock to funcBody since that's how it is used
- introduced new printer field 'level' tracking the composite
literal nesting level
- update/restore the composite literal nesting level as needed
Fixes#18782.
Change-Id: Ie833a9b5a559c4ec0f2eef2c5dc97aa263dca53a
Reviewed-on: https://go-review.googlesource.com/35811
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Modules appear in the moduledata linked list in the order they are
loaded by the dynamic loader, with one exception: the
firstmoduledata itself the module that contains the runtime.
This is not always the first module (when using -buildmode=shared,
it is typically libstd.so, the second module).
The order matters for typelinksinit, so we swap the first module
with whatever module contains the main function.
Updates #18729
This fixes the test case extracted with -linkshared, and now
go test -linkshared encoding/...
passes. However the original issue about a plugin failure is not
yet fixed.
Change-Id: I9f399ecc3518e22e6b0a350358e90b0baa44ac96
Reviewed-on: https://go-review.googlesource.com/35644
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Slower builders were failing TestQueryContext because the cancel
and return to conn pool happens async. TestQueryContext already
uses a wait method for this reason. Use the same method for
other context tests.
Fixes#18759
Change-Id: I84cce697392b867e4ebdfadd38027a06ca14655f
Reviewed-on: https://go-review.googlesource.com/35750
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Update docs on correspondence between Go releases and GCC releases.
Update C type that corresponds to Go type `int`.
Drop out of date comments about Ubuntu and RTEMS.
Change-Id: Ic1b5ce9f242789af23ec3b7e7a64c9d257d6913e
Reviewed-on: https://go-review.googlesource.com/35631
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The presence of Request.GetBody being set on a request was causing all
redirected requests to have a body, even if the redirect status didn't
warrant one.
This bug came from 307/308 support (https://golang.org/cl/29852) which
removed the line that set req.Body to nil after POST/PUT redirects.
Change-Id: I2a4dd5320f810ae25cfd8ea8ca7c9700e5dbd369
Reviewed-on: https://go-review.googlesource.com/35633
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Otherwise we don't emit any required ELF relocations when doing an
external link, because elfrelocsect skips unreachable symbols.
Fixes#18745.
Change-Id: Ia3583c41bb6c5ebb7579abd26ed8689370311cd6
Reviewed-on: https://go-review.googlesource.com/35590
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
memmove used to use 2 2-byte load/store pairs to move 4 bytes.
When the result is loaded with a single 4-byte load, it caused
a store to load fowarding stall. To avoid the stall,
special case memmove to use 4 byte ops for the 4 byte copy case.
We already have a special case for 8-byte copies.
386 already specializes 4-byte copies.
I'll do 2-byte copies also, but not for 1.8.
benchmark old ns/op new ns/op delta
BenchmarkIssue18740-8 7567 4799 -36.58%
3-byte copies get a bit slower. Other copies are unchanged.
name old time/op new time/op delta
Memmove/3-8 4.76ns ± 5% 5.26ns ± 3% +10.50% (p=0.000 n=10+10)
Fixes#18740
Change-Id: Iec82cbac0ecfee80fa3c8fc83828f9a1819c3c74
Reviewed-on: https://go-review.googlesource.com/35567
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The constant propagation rules selected the wrong operand to
propagate. So MOVDNE (move if not equal) propagated operands as if
it were a MOVDEQ (move if equal).
Fixes#18735.
Change-Id: I87ac469172f9df7d5aabaf7106e2936ce54ae202
Reviewed-on: https://go-review.googlesource.com/35498
Run-TryBot: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is needed for typical tests with gccgo, as it passes the
LD_LIBRARY_PATH environment variable to the new program.
Change-Id: I9bf4b0dbdff63f5449c7fcb8124eaeab10ed7f34
Reviewed-on: https://go-review.googlesource.com/35481
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
With GCC 7 (not yet released), cgo fails with errors like
./sigaltstack.go:65:8: call of non-function C.restoreSignalStack
I do not know precisely why. Explicitly declaring that there are no
arguments to the static function is a simple fix for the debug info.
Change-Id: Id96e1cb1e55ee37a9f1f5ad243d7ee33e71584ac
Reviewed-on: https://go-review.googlesource.com/35480
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When nilcheck runs, the values in a block are not in any particular
order. So any facts derived from examining the blocks shouldn't be
used until we reach the next block.
This is suboptimal as it won't eliminate nil checks within a block.
But it's probably a better fix for now as it is a much smaller change
than other strategies for fixing this bug.
nilptr3.go changes are mostly because for this pattern:
_ = *p
_ = *p
either nil check is fine to keep, and this CL changes which one
the compiler tends to keep.
There are a few regressions from code like this:
_ = *p
f()
_ = *p
For this pattern, after this CL we issue 2 nil checks instead of one.
(For the curious, this happens because intra-block nil check
elimination now falls to CSE, not nilcheck proper. The former
pattern has two nil checks with the same store argument. The latter
pattern has two nil checks with different store arguments.)
Fixes#18725
Change-Id: I3721b494c8bc9ba1142dc5c4361ea55c66920ac8
Reviewed-on: https://go-review.googlesource.com/35485
Reviewed-by: Cherry Zhang <cherryyz@google.com>
pprof.WriteHeapProfile is shorthand for
pprof.Lookup("heap").WriteTo(f, 0).
The second parameter is debug.
If it is non-zero, pprof writes legacy-format
pprof output, which compilebench can parse.
Fixes#18641
Change-Id: Ica69adeb9809e9b5933aed943dcf4a07910e43fc
Reviewed-on: https://go-review.googlesource.com/35484
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
6593d8650d go/ast: fix Object's doc comment about Data
c1730ae424 runtime: force workers out before checking mark roots
d10eddcba3 testing: make parallel t.Run safe again
2c8b70eacf crypto/x509: revert SystemCertPool implementation for Windows
fcfd91858b doc/go1.8: document Plan 9 requirements
81a61a96c9 runtime: for plugins, don't add duplicate itabs
f674537cc9 README.md: update and simplify
d8711919db cmd/go: fix bug help message
48d8edb5b2 crypto/tls: disable CBC cipher suites with SHA-256 by default
92ecd78933 cmd/compile: add ZeroWB case in writebarrier
787125abab doc: 2017 is the Year of the Gopher
5b708a6b6a cmd/compile: lvalues are only required for == when calling runtime fns
e83d506714 vendor/golang_org/x/crypto/poly1305: revendor to pick up fix for #1867376f981c8d8 net/http: skip TestServerHijackGetsBackgroundByte on Plan 9
e395e3246a net/http: skip TestServerHijackGetsBackgroundByte_big on Plan 9
6a3c6c0de8 net/http: add another hijack-after-background-read test
467109bf56 all: test adjustments for the iOS builder
b2a3b54b95 net/http: make sure Hijack's bufio.Reader includes pre-read background byte
593ea3b360 cmd/go, misc: rework cwd handling for iOS tests
0642b8a2f1 syscall: export Fsid.X__val on s390x
4601eae6ba doc/gdb: mention GOTRACEBACK=crash
4c4c5fc7a3 misc/cgo/testplugin: test that types and itabs are unique
22689c4450 reflect: keep makeFuncImpl live across makeFuncStub
9cf06ed6cd cmd/link: only exclude C-only symbols on darwin
9c3630f578 compress/flate: avoid large stack growth in fillDeflate
4f0aac52d9 cmd/go: add comment about SIGUSR2 on iOS
333f764df3 cmd/go, misc: switch from breakpoint to SIGUSR2
39e31d5ec0 doc/go1.8: update timezone database version
08da8201ca misc/cgo/testshared: test that types and itabs are unique
fdde7ba2a2 runtime: avoid clobbering C callee-save register in cgoSigtramp
f65abf6ddc cmd/compile: hide testdclstack behind debug flag
641ef2a733 compress/gzip: skip TestGZIPFilesHaveZeroMTimes on non-builders
0724aa813f crypto/dsa: gofmt
ac05542985 net/http: deflake TestRetryIdempotentRequestsOnError
b842c9aac7 doc: remove inline styles
Change-Id: I642c056732fe1e8081e9d73e086e38ea0b2568cc
Currently we check that all roots are marked as soon as gcMarkDone
decides to transition from mark 1 to mark 2. However, issue #16083
indicates that there may be a race where we try to complete mark 1
while a worker is still scanning a stack, causing the root mark check
to fail.
We don't yet understand this race, but as a simple mitigation, move
the root check to after gcMarkDone performs a ragged barrier, which
will force any remaining workers to finish their current job.
Updates #16083. This may "fix" it, but it would be better to
understand and fix the underlying race.
Change-Id: I1af9ce67bd87ade7bc2a067295d79c28cd11abd2
Reviewed-on: https://go-review.googlesource.com/35353
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
We already do this for shared libraries. Do it for plugins also.
Suggestions on how to test this would be welcome.
I'd like to get this in for 1.8. It could lead to mysterious
hangs when using plugins.
Fixes#18676
Change-Id: I03209b096149090b9ba171c834c5e59087ed0f92
Reviewed-on: https://go-review.googlesource.com/35117
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
The bug subcommand opens up the browser instead of printing information.
Fixes help message to reflect that.
Fixes#18630.
Change-Id: I660c94bc65ef1994292cfd72d08a544699545701
Reviewed-on: https://go-review.googlesource.com/35150
Reviewed-by: Russ Cox <rsc@golang.org>
As is, they were fully vulnerable to the Lucky13 attack. The SHA1
variants implement limited countermeasures (see f28cf8346c) but the
SHA256 ones are apparently used rarely enough (see 8741504888) that
it's not worth the extra code.
Instead, disable them by default and update the warning.
Updates #13385
Updates #15487
Change-Id: I45b8b716001e2fa0811b17e25be76e2512e5abb2
Reviewed-on: https://go-review.googlesource.com/35290
Reviewed-by: Adam Langley <alangley@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matt Layher <mdlayher@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It looks like it should be there, although I couldn't find a test
case that fails without it. ZeroWB is probably never generated now:
zeroing an initialized heap object is done by making an autotmp on
stack, zeroing it, and copying (typedmemmove) to heap.
Passes "toolstash -cmp" on std.
Change-Id: I702a59759e33fb8cc2a34a3b3029e7540aca080a
Reviewed-on: https://go-review.googlesource.com/35250
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 5232 added TestServerHijackGetsBackgroundByte, which is failing
on Plan 9, because CloseWrite is not implemented on Plan 9 yet.
Updates #17906.
Updates #18657.
Change-Id: I3c2f73760b0f767f3f9ed2698c855372170e0481
Reviewed-on: https://go-review.googlesource.com/35178
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 35234 added TestServerHijackGetsBackgroundByte_big, which is failing
on Plan 9, because CloseWrite is not implemented on Plan 9 yet.
Updates #17906.
Updates #18658.
Change-Id: Icaf3fe3600d586515ecd92aca874104ea81ce6b9
Reviewed-on: https://go-review.googlesource.com/35179
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The working directory is now adjusted to match the typical Go test
working directory in main, as the old trick for adjusting earlier
stopped working with the latest version of LLDB bugs.
That means the small number of places where testdata files are
read before main is called no longer work. This CL adjusts those
reads to happen after main is called. (This has the bonus effect of
not reading some benchmark testdata files in all.bash.)
Fixes compress/bzip2, go/doc, go/parser, os, and time package
tests on the iOS builder.
Change-Id: If60f026aa7848b37511c36ac5e3985469ec25209
Reviewed-on: https://go-review.googlesource.com/35255
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, if the Hijack called stopped the background read call
which read a byte, that byte was sitting in memory, buffered, ready to
be Read by Hijack's returned bufio.Reader, but it wasn't yet in the
bufio.Reader's buffer itself, so bufio.Reader.Buffered() reported 1
byte fewer.
This matters for callers who wanted to stitch together any buffered
data (with bufio.Reader.Peek(bufio.Reader.Buffered())) with Hijack's
returned net.Conn. Otherwise there was no way for callers to know a
byte was read.
Change-Id: Id7cb0a0a33fe2f33d79250e13dbaa9c0f7abba13
Reviewed-on: https://go-review.googlesource.com/35232
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Another change in behvaior (bug) in LLDB. Despite the fact that
LLDB can dump the symtab of our test binaries and show the function
addresses, it can no longer call the functions. This means the chdir
trick on signal is failing.
This CL uses a new trick. For iOS, the exec script passes the change
in directory as an argument, and it is processed early by the test
harness generated by cmd/go.
For the iOS builders.
Change-Id: I8f5d0f831fe18de99f097761f89c5184d5bf2afb
Reviewed-on: https://go-review.googlesource.com/35152
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
mkpost.go replaces all variables prefixed with 'X_' with '_' on s390x
because most of them do not need to be exposed. X__val is being used
by a third party library so it turns out we do need to expose it on
s390x (it is already exposed on all other Linux architectures).
Fixes#17298 and updates #18632.
Change-Id: Ic03463229a5f75ca41a4a4b50300da4b4d892d45
Reviewed-on: https://go-review.googlesource.com/30130
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Make sure that the same type and itab generated in two
different plugins are actually the same thing.
See also CL 35115
Change-Id: I0c1ecb039d7e2bf5a601d58dfa162a435ae4ef76
Reviewed-on: https://go-review.googlesource.com/35116
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
When traceback sees reflect.makeFuncStub (or reflect.methodValueCall)
on the stack, it expects to be able to get the *reflect.makeFuncImpl
(or *reflect.methodValue) for that call from the first outgoing
argument slot of makeFuncStub/methodValueCall.
However, currently this object isn't necessarily kept live across
makeFuncStub. This means it may get garbage collected while in a
reflect call and reused for something else. If we then try to
traceback, the runtime will see a corrupted makeFuncImpl object and
panic. This was not a problem in previous releases because we always
kept arguments live across the whole function. This became a problem
when we stopped doing this.
Fix this by using reflect.KeepAlive to keep the
makeFuncImpl/methodValue live across all of callReflect/callMethod,
which in turn keeps it live as long as makeFuncStub/methodValueCall
are on the stack.
Fixes#18635.
Change-Id: I91853efcf17912390fddedfb0230648391c33936
Reviewed-on: https://go-review.googlesource.com/35151
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
C-only symbols are excluded from pclntab because of a quirk of darwin,
where functions are referred to by an exported symbol so dynamic
relocations de-duplicate to the host binary module and break unwinding.
This doesn't happen on ELF systems because the linker always refers to
unexported module-local symbols, so we don't need this condition.
And the current logic for excluding some functions breaks the module
verification code in moduledataverify1. So disable this for plugins
on linux.
(In 1.9, it will probably be necessary to introduce a module-local
symbol reference system on darwin to fix a different bug, so all of
this onlycsymbol code made be short-lived.)
With this CL, the tests in CL 35116 pass.
Change-Id: I517d7ca4427241fa0a91276c462827efb9383be9
Reviewed-on: https://go-review.googlesource.com/35190
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Ranging over an array causes the array to be copied over to the
stack, which cause large re-growths. Instead, we should iterate
over slices of the array.
Also, assigning a large struct literal uses the stack even
though the actual fields being populated are small in comparison
to the entirety of the struct (see #18636).
Fixing the stack growth does not alter CPU-time performance much
since the stack-growth and copying was such a tiny portion of the
compression work:
name old time/op new time/op delta
Encode/Digits/Default/1e4-8 332µs ± 1% 332µs ± 1% ~ (p=0.796 n=10+10)
Encode/Digits/Default/1e5-8 5.07ms ± 2% 5.05ms ± 1% ~ (p=0.815 n=9+8)
Encode/Digits/Default/1e6-8 53.7ms ± 1% 53.9ms ± 1% ~ (p=0.075 n=10+10)
Encode/Twain/Default/1e4-8 380µs ± 1% 380µs ± 1% ~ (p=0.684 n=10+10)
Encode/Twain/Default/1e5-8 5.79ms ± 2% 5.79ms ± 1% ~ (p=0.497 n=9+10)
Encode/Twain/Default/1e6-8 61.5ms ± 1% 61.8ms ± 1% ~ (p=0.247 n=10+10)
name old speed new speed delta
Encode/Digits/Default/1e4-8 30.1MB/s ± 1% 30.1MB/s ± 1% ~ (p=0.753 n=10+10)
Encode/Digits/Default/1e5-8 19.7MB/s ± 2% 19.8MB/s ± 1% ~ (p=0.795 n=9+8)
Encode/Digits/Default/1e6-8 18.6MB/s ± 1% 18.5MB/s ± 1% ~ (p=0.072 n=10+10)
Encode/Twain/Default/1e4-8 26.3MB/s ± 1% 26.3MB/s ± 1% ~ (p=0.616 n=10+10)
Encode/Twain/Default/1e5-8 17.3MB/s ± 2% 17.3MB/s ± 1% ~ (p=0.484 n=9+10)
Encode/Twain/Default/1e6-8 16.3MB/s ± 1% 16.2MB/s ± 1% ~ (p=0.238 n=10+10)
Updates #18636Fixes#18625
Change-Id: I471b20339bf675f63dc56d38b3acdd824fe23328
Reviewed-on: https://go-review.googlesource.com/35122
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The iOS test harness has set a breakpoint early in the life of Go
programs so that it can change the current working directory using
information only available from the host debugger. Somewhere in the
upgrade to iOS 10 / XCode 8.2, breakpoints stopped working. This
may be an LLDB bug, or a bug in the ios-deploy LLDB scripts, it's
not clear.
Work around the problem by giving up on breakpoints. Instead, early
in the life of every test binary built for iOS, send (and ignore) a
SIGUSR2 signal. The debugger will catch this, giving the script
go_darwin_arm_exec a chance to change the working directory.
For the iOS builders.
Change-Id: I7476531985217d0c76bc176904c48379210576c2
Reviewed-on: https://go-review.googlesource.com/34926
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure that the same type and itab generated in two
different shared library are actually the same thing.
Change-Id: Ica45862d65ff8bc7ad04d59a41f57223f71224cd
Reviewed-on: https://go-review.googlesource.com/35115
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Use R11 (a caller-saved temp register) instead of RBX (a callee-saved
register).
I believe this only affects linux/amd64, since it is the only platform
with a non-trivial cgoSigtramp implementation.
Updates #18328.
Change-Id: I3d35c4512624184d5a8ece653fa09ddf50e079a2
Reviewed-on: https://go-review.googlesource.com/35068
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The test was previously an integration test, relying on luck and many
goroutines and lots of time to hit the path to be tested.
Instead, rewrite the test to exactly hit the path to be tested, in one
try, in one goroutine.
Fixes#18205
Change-Id: I63cd513316344bfd7375dcc452c1c396dec0e49f
Reviewed-on: https://go-review.googlesource.com/35107
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The test is inherently racy and vulnerable to starvation,
and within all.bash on some platforms that means it flakes.
Test is kept because it can be useful standalone to verify
behavior of GOEXPERIMENT=preeemptibleloops, and there is
likely to be further development of this feature in the
future.
There's also some question as to why it is flaking, because
though technically this is permitted, it's very odd in this
simple case.
Fixes#18589.
Change-Id: Ia0dd9037285c4a03122da4012c96981c9cc43b60
Reviewed-on: https://go-review.googlesource.com/35051
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Loop breaking with a counter. Benchmarked (see comments),
eyeball checked for sanity on popular loops. This code
ought to handle loops in general, and properly inserts phi
functions in cases where the earlier version might not have.
Includes test, plus modifications to test/run.go to deal with
timeout and killing looping test. Tests broken by the addition
of extra code (branch frequency and live vars) for added
checks turn the check insertion off.
If GOEXPERIMENT=preemptibleloops, the compiler inserts reschedule
checks on every backedge of every reducible loop. Alternately,
specifying GO_GCFLAGS=-d=ssa/insert_resched_checks/on will
enable it for a single compilation, but because the core Go
libraries contain some loops that may run long, this is less
likely to have the desired effect.
This is intended as a tool to help in the study and diagnosis
of GC and other latency problems, now that goal STW GC latency
is on the order of 100 microseconds or less.
Updates #17831.
Updates #10958.
Change-Id: I6206c163a5b0248e3f21eb4fc65f73a179e1f639
Reviewed-on: https://go-review.googlesource.com/33910
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
In Go1.7, a 301, 302, or 303 redirect on a HEAD method, would still
cause the following redirects to still use a HEAD.
In CL/29852 this behavior was changed such that those codes always
caused a redirect with the GET method. Fix this such that both
GET and HEAD will preserve the method.
Fixes#18570
Change-Id: I4bfe69872a30799419e3fad9178f907fe439b449
Reviewed-on: https://go-review.googlesource.com/34981
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CALLPART of STRUCTLIT did not check for incomplete initialization
of struct; modify PTRLIT treatment to force zeroing.
Test for structlit, believe this might have also failed for
arraylit.
Fixes#18410.
Change-Id: I511abf8ef850e300996d40568944665714efe1fc
Reviewed-on: https://go-review.googlesource.com/34622
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
To implement the blocking of a select, a goroutine builds a list of
offers to communicate (pseudo-g's, aka sudog), one for each case,
queues them on the corresponding channels, and waits for another
goroutine to complete one of those cases and wake it up. Obviously it
is not OK for two other goroutines to complete multiple cases and both
wake the goroutine blocked in select. To make sure that only one
branch of the select is chosen, all the sudogs contain a pointer to a
shared (single) 'done uint32', which is atomically cas'ed by any
interested goroutines. The goroutine that wins the cas race gets to
wake up the select. A complication is that 'done uint32' is stored on
the stack of the goroutine running the select, and that stack can move
during the select due to stack growth or stack shrinking.
The relevant ordering to block and unblock in select is:
1. Lock all channels.
2. Create list of sudogs and queue sudogs on all channels.
3. Switch to system stack, mark goroutine as asleep,
unlock all channels.
4. Sleep until woken.
5. Wake up on goroutine stack.
6. Lock all channels.
7. Dequeue sudogs from all channels.
8. Free list of sudogs.
9. Unlock all channels.
There are two kinds of stack moves: stack growth and stack shrinking.
Stack growth happens while the original goroutine is running.
Stack shrinking happens asynchronously, during garbage collection.
While a channel listing a sudog is locked by select in this process,
no other goroutine can attempt to complete communication on that
channel, because that other goroutine doesn't hold the lock and can't
find the sudog. If the stack moves while all the channel locks are
held or when the sudogs are not yet or no longer queued in the
channels, no problem, because no goroutine can get to the sudogs and
therefore to selectdone. We only need to worry about the stack (and
'done uint32') moving with the sudogs queued in unlocked channels.
Stack shrinking can happen any time the goroutine is stopped.
That code already acquires all the channel locks before doing the
stack move, so it avoids this problem.
Stack growth can happen essentially any time the original goroutine is
running on its own stack (not the system stack). In the first half of
the select, all the channels are locked before any sudogs are queued,
and the channels are not unlocked until the goroutine has stopped
executing on its own stack and is asleep, so that part is OK. In the
second half of the select, the goroutine wakes up on its own goroutine
stack and immediately locks all channels. But the actual call to lock
might grow the stack, before acquiring any locks. In that case, the
stack is moving with the sudogs queued in unlocked channels. Not good.
One goroutine has already won a cas on the old stack (that goroutine
woke up the selecting goroutine, moving it out of step 4), and the
fact that done = 1 now should prevent any other goroutines from
completing any other select cases. During the stack move, however,
sudog.selectdone is moved from pointing to the old done variable on
the old stack to a new memory location on the new stack. Another
goroutine might observe the moved pointer before the new memory
location has been initialized. If the new memory word happens to be
zero, that goroutine might win a cas on the new location, thinking it
can now complete the select (again). It will then complete a second
communication (reading from or writing to the goroutine stack
incorrectly) and then attempt to wake up the selecting goroutine,
which is already awake.
The scribbling over the goroutine stack unexpectedly is already bad,
but likely to go unnoticed, at least immediately. As for the second
wakeup, there are a variety of ways it might play out.
* The goroutine might not be asleep.
That will produce a runtime crash (throw) like in #17007:
runtime: gp: gp=0xc0422dcb60, goid=2299, gp->atomicstatus=8
runtime: g: g=0xa5cfe0, goid=0, g->atomicstatus=0
fatal error: bad g->status in ready
Here, atomicstatus=8 is copystack; the second, incorrect wakeup is
observing that the selecting goroutine is in state "Gcopystack"
instead of "Gwaiting".
* The goroutine might be sleeping in a send on a nil chan.
If it wakes up, it will crash with 'fatal error: unreachable'.
* The goroutine might be sleeping in a send on a non-nil chan.
If it wakes up, it will crash with 'fatal error: chansend:
spurious wakeup'.
* The goroutine might be sleeping in a receive on a nil chan.
If it wakes up, it will crash with 'fatal error: unreachable'.
* The goroutine might be sleeping in a receive on a non-nil chan.
If it wakes up, it will silently (incorrectly!) continue as if it
received a zero value from a closed channel, leaving a sudog queued on
the channel pointing at that zero vaue on the goroutine's stack; that
space will be reused as the goroutine executes, and when some other
goroutine finally completes the receive, it will do a stray write into
the goroutine's stack memory, which may cause problems. Then it will
attempt the real wakeup of the goroutine, leading recursively to any
of the cases in this list.
* The goroutine might have been running a select in a finalizer
(I hope not!) and might now be sleeping waiting for more things to
finalize. If it wakes up, as long as it goes back to sleep quickly
(before the real GC code tries to wake it), the spurious wakeup does
no harm (but the stack was still scribbled on).
* The goroutine might be sleeping in gcParkAssist.
If it wakes up, that will let the goroutine continue executing a bit
earlier than we would have liked. Eventually the GC will attempt the
real wakeup of the goroutine, leading recursively to any of the cases
in this list.
* The goroutine cannot be sleeping in bgsweep, because the background
sweepers never use select.
* The goroutine might be sleeping in netpollblock.
If it wakes up, it will crash with 'fatal error: netpollblock:
corrupted state'.
* The goroutine might be sleeping in main as another thread crashes.
If it wakes up, it will exit(0) instead of letting the other thread
crash with a non-zero exit status.
* The goroutine cannot be sleeping in forcegchelper,
because forcegchelper never uses select.
* The goroutine might be sleeping in an empty select - select {}.
If it wakes up, it will return to the next line in the program!
* The goroutine might be sleeping in a non-empty select (again).
In this case, it will wake up spuriously, with gp.param == nil (no
reason for wakeup), but that was fortuitously overloaded for handling
wakeup due to a closing channel and the way it is handled is to rerun
the select, which (accidentally) handles the spurious wakeup
correctly:
if cas == nil {
// This can happen if we were woken up by a close().
// TODO: figure that out explicitly so we don't need this loop.
goto loop
}
Before looping, it will dequeue all the sudogs on all the channels
involved, so that no other goroutine will attempt to wake it.
Since the goroutine was blocked in select before, being blocked in
select again when the spurious wakeup arrives may be quite likely.
In this case, the spurious wakeup does no harm (but the stack was
still scribbled on).
* The goroutine might be sleeping in semacquire (mutex slow path).
If it wakes up, that is taken as a signal to try for the semaphore
again, not a signal that the semaphore is now held, but the next
iteration around the loop will queue the sudog a second time, causing
a cycle in the wakeup list for the given address. If that sudog is the
only one in the list, when it is eventually dequeued, it will
(due to the precise way the code is written) leave the sudog on the
queue inactive with the sudog broken. But the sudog will also be in
the free list, and that will eventually cause confusion.
* The goroutine might be sleeping in notifyListWait, for sync.Cond.
If it wakes up, (*Cond).Wait returns. The docs say "Unlike in other
systems, Wait cannot return unless awoken by Broadcast or Signal,"
so the spurious wakeup is incorrect behavior, but most callers do not
depend on that fact. Eventually the condition will happen, attempting
the real wakeup of the goroutine and leading recursively to any of the
cases in this list.
* The goroutine might be sleeping in timeSleep aka time.Sleep.
If it wakes up, it will continue running, leaving a timer ticking.
When that time bomb goes off, it will try to ready the goroutine
again, leading to any one of the cases in this list.
* The goroutine cannot be sleeping in timerproc,
because timerproc never uses select.
* The goroutine might be sleeping in ReadTrace.
If it wakes up, it will print 'runtime: spurious wakeup of trace
reader' and return nil. All future calls to ReadTrace will print
'runtime: ReadTrace called from multiple goroutines simultaneously'.
Eventually, when trace data is available, a true wakeup will be
attempted, leading to any one of the cases in this list.
None of these fatal errors appear in any of the trybot or dashboard
logs. The 'bad g->status in ready' that happens if the goroutine is
running (the most likely scenario anyway) has happened once on the
dashboard and eight times in trybot logs. Of the eight, five were
atomicstatus=8 during net/http tests, so almost certainly this bug.
The other three were atomicstatus=2, all near code in select,
but in a draft CL by Dmitry that was rewriting select and may or may
not have had its own bugs.
This bug has existed since Go 1.4. Until then the select code was
implemented in C, 'done uint32' was a C stack variable 'uint32 done',
and C stacks never moved. I believe it has become more common recently
because of Brad's work to run more and more tests in net/http in
parallel, which lengthens race windows.
The fix is to run step 6 on the system stack,
avoiding possibility of stack growth.
Fixes#17007 and possibly other mysterious failures.
Change-Id: I9d6575a51ac96ae9d67ec24da670426a4a45a317
Reviewed-on: https://go-review.googlesource.com/34835
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This adds high-level descriptions of the scheduler structures, the
user and system stacks, error handling, and synchronization.
Change-Id: I1eed97c6dd4a6e3d351279e967b11c6e64898356
Reviewed-on: https://go-review.googlesource.com/34290
Reviewed-by: Rick Hudson <rlh@golang.org>
The comment describing the overall GC algorithm at the top of mgc.go
has gotten woefully out-of-date (and was possibly never
correct/complete). Update it to reflect the current workings of the
GC and the set of phases that we now divide it into.
Change-Id: I02143c0ebefe9d4cd7753349dab8045f0973bf95
Reviewed-on: https://go-review.googlesource.com/34711
Reviewed-by: Rick Hudson <rlh@golang.org>
If one of the c.Get(ts.URL) results in an error, the child goroutine
calls t.Errorf, but the test goroutine gets stuck waiting for <-gotReqCh,
so the test hangs and the program is eventually killed (after 10 minutes!).
Whatever might have been printed to t.Errorf is never seen.
Adjust test so that the test fails cleanly in this case.
Still trying to debug why c.Get might fail.
It seems to have something to do with occasional connection
failures on macOS Sierra.
Change-Id: Ia797787bd51ea7cd6deb1192aec89c331c4f2c48
Reviewed-on: https://go-review.googlesource.com/34836
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, the check for legal pointers in stack copying uses
_PageSize (8K) as the minimum legal pointer. By default, Linux won't
let you map under 64K, but
1) it's less clear what other OSes allow or will allow in the future;
2) while mapping the first page is a terrible idea, mapping anywhere
above that is arguably more justifiable;
3) the compiler only assumes the first physical page (4K) is never
mapped.
Make the runtime consistent with the compiler and more robust by
changing the bad pointer check to use 4K as the minimum legal pointer.
This came out of discussions on CLs 34663 and 34719.
Change-Id: Idf721a788bd9699fb348f47bdd083cf8fa8bd3e5
Reviewed-on: https://go-review.googlesource.com/34890
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Fixes#18392.
Avoid nil dereferencing n.Right when dealing with non-existent
self referenced interface methods e.g.
type A interface{
Fn(A.Fn)
}
Instead, infer the symbol name from n.Sym itself.
Change-Id: I60d5f8988e7318693e5c8da031285d8d7347b771
Reviewed-on: https://go-review.googlesource.com/34817
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This change uses runtime.support_bmi2 as an additional condition
to examine the usability of AVX2 version algorithm, fixes
the crash on the platfrom which supports AVX2 but not support BMI2.
Fixes#18512
Change-Id: I408c0844ae2eb242dacf70cb9e8cec1b8f3bd941
Reviewed-on: https://go-review.googlesource.com/34851
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The existing implementations on AMD64 only detects AVX2 usability,
when they also contains BMI (bit-manipulation instructions).
These instructions crash the running program as 'unknown instructions'
on the architecture, e.g. i3-4000M, which supports AVX2 but not
support BMI.
This change added the detections for BMI1 and BMI2 to AMD64 runtime with
two flags as the result, `support_bmi1` and `support_bmi2`,
in runtime/runtime2.go. It also completed the condition to run AVX2 version
in packages crypto/sha1 and crypto/sha256.
Fixes#18512
Change-Id: I917bf0de365237740999de3e049d2e8f2a4385ad
Reviewed-on: https://go-review.googlesource.com/34850
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When I wrote the lines
bin/
pkg/
I was trying to match just the top-level bin and pkg directories, and I put the
final slash in because 'git help gitignore' says:
o If the pattern does not contain a slash /, Git treats it as a shell
glob pattern and checks for a match against the pathname relative
to the location of the .gitignore file (relative to the toplevel of
the work tree if not from a .gitignore file).
o Otherwise, Git treats the pattern as a shell glob suitable for
consumption by fnmatch(3) with the FNM_PATHNAME flag: wildcards in
the pattern will not match a / in the pathname. For example,
"Documentation/*.html" matches "Documentation/git.html" but not
"Documentation/ppc/ppc.html" or
"tools/perf/Documentation/perf.html".
Putting a trailing slash was my way of opting in to the "rooted path" semantics
without looking different from the surrounding rooted paths like "src/go/build/zcgo.go".
But HA HA GIT FOOLED YOU! above those two bullets the docs say:
o If the pattern ends with a slash, it is removed for the purpose of
the following description, ...
Change all the patterns to use a leading slash for "rooted" behavior.
This bit me earlier today because I had a perfectly reasonable source
code directory go/src/cmd/go/testdata/src/empty/pkg that was
not added by 'git add empty'.
Change-Id: I6f8685b3c5be22029c33de9ccd735487089a1c03
Reviewed-on: https://go-review.googlesource.com/34832
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Android on ChromeOS uses a restrictive seccomp filter that blocks
sched_getaffinity, leading this code to index a slice by -errno.
Change-Id: Iec09a4f79dfbc17884e24f39bcfdad305de75b37
Reviewed-on: https://go-review.googlesource.com/34794
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Given
var t struct{ lock sync.Mutex }
var fntab []func(t)
f(a(), b(&t), c(), fntab[0](t))
Before:
function call copies lock value: struct{lock sync.Mutex} contains sync.Mutex
After:
call of fntab[0] copies lock value: struct{lock sync.Mutex} contains sync.Mutex
This will make diagnosis easier when there are multiple function calls per line.
Change-Id: I9881713c5671b847b84a0df0115f57e7cba17d72
Reviewed-on: https://go-review.googlesource.com/34730
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Clean up the phrasing a little bit, make the comment fit in 80
characters, and fix the spelling of "guard."
Change-Id: I688a3e760b8d67ea83830635f64dff04dd9a5911
Reviewed-on: https://go-review.googlesource.com/34792
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously Tx.done was being set in close, but in a Tx
rollback and Commit are the real closing methods,
and Tx.close is just a helper common to both. Prior to this
change a multiple rollback statements could be called, one
would enter close and begin closing it while the other was
still in rollback breaking it. Fix that by setting done
in rollback and Commit, not in Tx.close.
Fixes#18429
Change-Id: Ie274f60c2aa6a4a5aa38e55109c05ea9d4fe0223
Reviewed-on: https://go-review.googlesource.com/34716
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It doesn't work if the package name includes a '.' or a non-ASCII
character (or '%', '"', or a control character). See #16710 and CL 31970.
Update #18246.
Change-Id: I1487f462a3dc7b0016fce3aa1ea6239b226e6e39
Reviewed-on: https://go-review.googlesource.com/34791
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Current handling of WriteTimeout for http2 does not
extend the timeout on new streams. Disable the WriteTimeout
in http2 for 1.8 release.
Updates #18437
Change-Id: I20480432ab176f115464434645defb56ebeb6ece
Reviewed-on: https://go-review.googlesource.com/34723
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Avoid potential race conditions by clarifying to implemntors of the
ReverseProxy interface, the lifetime of provided http.Request structs.
Fixes#18456
Change-Id: I46aa60322226ecc3a0d30fa1ef108e504171957a
Reviewed-on: https://go-review.googlesource.com/34720
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#6772.
Lock-in test for invalid range loop: repeated variables in range declaration.
Change-Id: I37dd8b1cd7279abe7810deaf8a5d485c5c3b73ca
Reviewed-on: https://go-review.googlesource.com/34714
Reviewed-by: Keith Randall <khr@golang.org>
Fixes#5790.
Fixes#18421.
* Lock in _ = x1/x2 divide by zero runtime panics since
it is actually evaluated and not discarded as in previous
versions before Go1.8.
* Update a test that was skipping over zerodivide tests
that expected runtime panics, enabling us to check for
the expected panics.
Change-Id: I0af0a6ecc19345fa9763ab2e35b275fb2d9d0194
Reviewed-on: https://go-review.googlesource.com/34712
Reviewed-by: Keith Randall <khr@golang.org>
Previous changes started using the full filename for object files
on graph nodes, instead of just the file basename. The basename
was still being used when selecting mappings to disassemble for
weblist and disasm commands, causing a mismatch.
This fixes#18385. It was already fixed on the upstream pprof.
Change-Id: I1664503634f2c8cd31743561301631f12c4949c9
Reviewed-on: https://go-review.googlesource.com/34665
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In Go 1.8, we'd removed the Transport's Request.Body
one-byte-Read-sniffing to disambiguate between non-nil Request.Body
with a ContentLength of 0 or -1. Previously, we tried to see whether a
ContentLength of 0 meant actually zero, or just an unset by reading a
single byte of the Request.Body and then stitching any read byte back
together with the original Request.Body.
That historically has caused many problems due to either data races,
blocking forever (#17480), or losing bytes (#17071). Thus, we removed
it in both HTTP/1 and HTTP/2 in Go 1.8. Unfortunately, during the Go
1.8 beta, we've found that a few people have gotten bitten by the
behavior change on requests with methods typically not containing
request bodies (e.g. GET, HEAD, DELETE). The most popular example is
the aws-go SDK, which always set http.Request.Body to a non-nil value,
even on such request methods. That was causing Go 1.8 to send such
requests with Transfer-Encoding chunked bodies, with zero bytes,
confusing popular servers (including but limited to AWS).
This CL partially reverts the no-byte-sniffing behavior and restores
it only for GET/HEAD/DELETE/etc requests, and only when there's no
Transfer-Encoding set, and the Content-Length is 0 or -1.
Updates #18257 (aws-go) bug
And also private bug reports about non-AWS issues.
Updates #18407 also, but haven't yet audited things enough to declare
it fixed.
Change-Id: Ie5284d3e067c181839b31faf637eee56e5738a6a
Reviewed-on: https://go-review.googlesource.com/34668
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 33652 removed the fake auxv for Android, and replaced it with
a /proc/self/auxv fallback. When /proc/self/auxv is unreadable,
however, hardware capabilities detection won't work and the runtime
will mistakenly think that floating point hardware is unavailable.
Fix this by always assuming floating point hardware on Android.
Manually tested on a Nexus 5 running Android 6.0.1. I suspect the
android/arm builder has a readable /proc/self/auxv and therefore
does not trigger the failure mode.
Change-Id: I95c3873803f9e17333c6cb8b9ff2016723104085
Reviewed-on: https://go-review.googlesource.com/34641
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On Windows, CreateThread occasionally fails with ERROR_ACCESS_DENIED.
We're not sure why this is, but the Wine source code suggests that
this can happen when there's a concurrent CreateThread and ExitProcess
in the same process.
Fix this by setting a flag right before calling ExitProcess and
halting if CreateThread fails and this flag is set.
Updates #18253 (might fix it, but we're not sure this is the issue and
can't reproduce it on demand).
Change-Id: I1945b989e73a16cf28a35bf2613ffab07577ed4e
Reviewed-on: https://go-review.googlesource.com/34616
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Commit 10f75748 (CL 32222) taught AMD64 backend to rewrite series of
byte loads or stores with corresponding shifts into a single long or
quad load or store + appropriate BSWAP. However it did not added test
for stores - only loads were tested.
Fix it.
NOTE Tests for indexed stores are not added because 10f75748 did not add
support for indexed stores - only indexed loads were handled then.
Change-Id: I48c867ebe7622ac8e691d43741feed1d40cca0d7
Reviewed-on: https://go-review.googlesource.com/34634
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Since commit cc62bed0 (CL 994043) the pipe deadlock when doing
Read+Close or Write+Close on same end was fixed, alas with test for
Read+Close case only.
Then commit 6d6f3381 (CL 4252057) made a thinko: in the writer path
p.werr is checked for != nil and then err is set but there is no break
from waiting loop unlike break is there in similar condition for reader.
Together with having only Read+Close case tested that made it to leave
reintroduced Write+Close deadlock unnoticed.
Fix it.
Implicitly this also fixes net.Pipe to conform to semantic of net.Conn
interface where Close is documented to unblock any blocked Read or Write
operations.
No test added to net/ since net.Pipe tests are "Assuming that the
underlying io.Pipe implementation is solid and we're just testing the
net wrapping". The test added in this patch should be enough to cover
the breakage.
Fixes#18401
Updates #18170
Change-Id: I9e9460b3fd7d220bbe60b726accf86f352aed8d4
Reviewed-on: https://go-review.googlesource.com/34637
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
In CL 34650, LookupCNAME was changed so it always returns
the canonical DNS host, even when there is no CNAME record.
Consequently, TestLookupCNAME was failing on Plan 9,
because www.google.com doesn't have a CNAME record.
We changed the implementation of lookupCNAME on Plan 9, so it
returns the canonical DNS host after a CNAME lookup failure.
Fixes#18391.
Change-Id: I59f361bfb2c9de3953e998e8ac58c054979210bd
Reviewed-on: https://go-review.googlesource.com/34633
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Stop-the-world and freeze-the-world (used for unhandled panics) are
currently not safe to do at the same time. While a regular unhandled
panic can't happen concurrently with STW (if the P hasn't been
stopped, then the panic blocks the STW), a panic from a _SigThrow
signal can happen on an already-stopped P, racing with STW. When this
happens, freezetheworld sets sched.stopwait to 0x7fffffff and
stopTheWorldWithSema panics because sched.stopwait != 0.
Fix this by detecting when freeze-the-world happens before
stop-the-world has completely stopped the world and freeze the STW
operation rather than panicking.
Fixes#17442.
Change-Id: I646a7341221dd6d33ea21d818c2f7218e2cb7e20
Reviewed-on: https://go-review.googlesource.com/34611
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Piping into security verify-cert only worked on macOS Sierra, and was
flaky for unknown reasons. Users reported that the number of trusted
root certs stopped randomly jumping around once they switched to using
verify-cert against files on disk instead of /dev/stdin.
But even using "security verify-cert" on 150-200 certs took too
long. It took 3.5 seconds on my machine. More than 4 goroutines
hitting verify-cert didn't help much, and soon started to hurt
instead.
New strategy, from comments in the code:
// 1. Run "security trust-settings-export" and "security
// trust-settings-export -d" to discover the set of certs with some
// user-tweaked trusy policy. We're too lazy to parse the XML (at
// least at this stage of Go 1.8) to understand what the trust
// policy actually is. We just learn that there is _some_ policy.
//
// 2. Run "security find-certificate" to dump the list of system root
// CAs in PEM format.
//
// 3. For each dumped cert, conditionally verify it with "security
// verify-cert" if that cert was in the set discovered in Step 1.
// Without the Step 1 optimization, running "security verify-cert"
// 150-200 times takes 3.5 seconds. With the optimization, the
// whole process takes about 180 milliseconds with 1 untrusted root
// CA. (Compared to 110ms in the cgo path)
Fixes#18203
Change-Id: I4e9c11fa50d0273c615382e0d8f9fd03498d4cb4
Reviewed-on: https://go-review.googlesource.com/34389
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
This change reverts the following CLs:
CL/18274: handle mtime in NTFS/UNIX/ExtendedTS extra fields
CL/30811: only use Extended Timestamp on non-zero MS-DOS timestamps
We are reverting support for extended timestamps since the support was not
not complete. CL/18274 added full support for reading extended timestamp fields
and minimal support for writing them. CL/18274 is incomplete because it made
no changes to the FileHeader struct, so timezone information was lost when
reading and/or writing.
While CL/18274 was a step in the right direction, we should provide full
support for high precision timestamps in both the reader and writer.
This will probably require that we add a new field of type time.Time.
The complete fix is too involved to add in the time remaining for Go 1.8
and will be completed in Go 1.9.
Updates #10242
Updates #17403
Updates #18359Fixes#18378
Change-Id: Icf6d028047f69379f7979a29bfcb319a02f4783e
Reviewed-on: https://go-review.googlesource.com/34651
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Parser doesn't attach some compiler directives to anything in the tree.
We have to explicitely retain them in the generated code. This change,
makes cover explicitely print out any compiler directive that wasn't
handled in the ast.Visitor.
Fixes#18285.
Change-Id: Ib60f253815e92d7fc85051a7f663a61116e40a91
Reviewed-on: https://go-review.googlesource.com/34563
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The runtime no longer hard-codes the offset of
reflect.methodValue.stack, so remove these obsolete comments. Also,
reflect.methodValue and runtime.reflectMethodValue must also agree
with reflect.makeFuncImpl, so update the comments on all three to
mention this.
This was pointed out by Minux on CL 31138.
Change-Id: Ic5ed1beffb65db76aca2977958da35de902e8e58
Reviewed-on: https://go-review.googlesource.com/34590
Reviewed-by: Keith Randall <khr@golang.org>
golang.org/issue/17594 was caused by additab being called more than once for
an itab. golang.org/cl/32131 fixed that by making the itabs local symbols,
but that in turn causes golang.org/issue/18252 because now there are now
multiple itab symbols in a process for a given (type,interface) pair and
different code paths can end up referring to different itabs which breaks
lots of reflection stuff. So this makes itabs global again and just takes
care to only call additab once for each itab.
Fixes#18252
Change-Id: I781a193e2f8dd80af145a3a971f6a25537f633ea
Reviewed-on: https://go-review.googlesource.com/34173
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
It takes me several minutes every time I want to find where the linker
writes out the _func structures. Add some comments to make this
easier.
Change-Id: Ic75ce2786ca4b25726babe3c4fe9cd30c85c34e2
Reviewed-on: https://go-review.googlesource.com/34390
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Confirm that a trivial executable can build and execute using
-fsanitize=memory.
Fixes#18335 (by skipping the tests when they don't work).
Change-Id: Icb7a276ba7b57ea3ce31be36f74352cc68dc89d5
Reviewed-on: https://go-review.googlesource.com/34505
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This fixes Linux and the *BSD platforms on 386/amd64.
A few OS/arch combinations were already saving registers and/or doing
something that doesn't clearly resemble the SysV C ABI; those have
been left alone.
Fixes#18328.
Change-Id: I6398f6c71020de108fc8b26ca5946f0ba0258667
Reviewed-on: https://go-review.googlesource.com/34501
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I haven't been able to reproduce this one, but change a few suspect
things in this test. Notably, using the global "Get" function and thus
using the DefaultTransport was buggy in a parallel test. Then add some error
checks and close a TCP connection.
Hopefully the failure wasn't timing-related.
Fixes#18036 (I hope)
Change-Id: I4904e42e40b26d488cf82111424a1d4d46f42dae
Reviewed-on: https://go-review.googlesource.com/34490
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In Go 1.8, almost all the platforms except NaCl provide network
interface and address identification and applications can use IPv4
limited or directed broadcast addresses appropriately.
Fixes#18176.
Change-Id: Ie5de834d19c0aaeb4128a3ca655f6c4c9ae5e501
Reviewed-on: https://go-review.googlesource.com/34435
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Search the sample types in the profile being processed to map
sample type options to indices in the profile sample type array.
Previously these were hardcoded, which caused issues when the
sample types for a profile type changed. For instance, this was
triggered by the native generation of profiles in profile.proto
format.
This fixes#18230. A similar mechanism already exists on the upstream
pprof.
Change-Id: I945d8d842a0c2ca14299dabefe83124746ecd7e2
Reviewed-on: https://go-review.googlesource.com/34382
Reviewed-by: Michael Matloob <matloob@golang.org>
We are seeing a bad stack map in #18190. In a copystack, it is
mistaking a slot for a pointer.
Presumably this is caused either by our fledgling dynlink support on
darwin, or a consequence of having two copies of the runtime in the
process. But I have been unable to work out which in the 1.8 window,
so pushing darwin support to 1.9 or later.
Change-Id: I7fa4d2dede75033d9a428f24c1837a4613bd2639
Reviewed-on: https://go-review.googlesource.com/34391
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Explicitly filter any C-only cgo functions out of pclntable,
which allows them to be duplicated with the host binary.
Updates #18190.
Change-Id: I50d8706777a6133b3e95f696bc0bc586b84faa9e
Reviewed-on: https://go-review.googlesource.com/34199
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The client code was using time.Now() (wall time) to determine whether
the cause of a non-nil error meant that a timeout had occured. But on
Windows, the clock used for timers (time.After, time.Sleep, etc) is
much more accurate than the time.Now clock, which doesn't update
often.
But it turns out that as of the recent https://golang.org/cl/32478 we
already have the answer available easily. It just wasn't in scope.
Instead of passing this information along by decorating the errors
(risky this late in Go 1.8, especially with #15935 unresolved), just
passing along the "didTimeout" func internally for now. We can remove
that later in Go 1.9 if we overhaul Transport errors.
Fixes#18287 (I hope)
Change-Id: Icbbfceaf02de6c7ed04fe37afa4ca16374b58f3c
Reviewed-on: https://go-review.googlesource.com/34381
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
document about the consecutive dialing introduced in Go 1.5.
If address is resolved to multiple addresses,
Dial will try each address in order until one succeeds.
Deadline is used to try each address (calculated based on
total number of resolved addresses)
Fixes: #17617
Change-Id: I56b6399edb640c8ef507675f98e0bd45a50d4e2d
Reviewed-on: https://go-review.googlesource.com/34176
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Now that we try to handle qualifiers correctly (as of CL 33325), don't
strip them from a void* pointer. Otherwise we break a case like "const
void**", as the "const" qualifier is dropped and the resulting
"void**" triggers a warning from the C compiler.
Fixes#18298.
Change-Id: If51df1889b0f6a907715298c152e6d4584747acb
Reviewed-on: https://go-review.googlesource.com/34370
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A lot of things had to line up to make this break,
but the caching of download results interacted badly
with vendor directories, "go get -t -u", and wildcard
expansion.
Fixes#18219.
Change-Id: I2676498d2f714eaeb69f399e9ed527640c12e60d
Reviewed-on: https://go-review.googlesource.com/34201
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The check for duplicate struct field tags introduced in CL 16704
triggers a panic when an anonymous struct field with a duplicate name
is encountered. For such a field, the names slice of the ast.Field is
nil but accessed regardless to generate the warning message.
Additionally, the check produces false positives for XML tags in some
cases:
- When fields are encoded as XML attributes, a warning is produced when
an attribute reuses a name previously used for an element.
Example:
type Foo struct {
First int `xml:"a"`
NoDup int `xml:"a,attr"` // warning about reuse of "a"
}
- When XMLName is used to set the name of the enclosing struct element,
it is treated as a regular struct field.
Example:
type Bar struct {
XMLName xml.Name `xml:"a"`
NoDup int `xml:"a"` // warning about reuse of "a"
}
This commit addresses all three issues. The panic is avoided by using
the type name instead of the field name for anonymous struct fields when
generating the warning message. An additional namespace for checking XML
attribute names separately from element names is introduced. Lastly,
fields named XMLName are excluded from the check for duplicate tags.
Updates #18256
Change-Id: Ida48ea8584b56bd4d12ae3ebd588a66ced2594cc
Reviewed-on: https://go-review.googlesource.com/34070
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The test for the race detector itself had a race of a sort not
detected by the race detector.
Fixes#18286.
Change-Id: I3265eae275aaa2869a6b6d3e8675b0d88b25831b
Reviewed-on: https://go-review.googlesource.com/34287
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For the 1.8 release, go back to invoking the assembler once per .s
file, to avoid the problem in #18225. When the assembler is fixed, the
change to cmd/go/build.go can be rolled back, but the test in
cmd/go/go_test.go should remain.
Fixes#18225.
Update #15680.
Change-Id: Ibff8d0c638536efb50a2b2c280b41399332f4fe4
Reviewed-on: https://go-review.googlesource.com/34284
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is the simplest CL that I can make for Go 1.8. For Go 1.9, we can revisit it
and optimize the redundant address generation instructions or just fix#599 instead.
Fixes#18140.
Change-Id: Ie4804ab0e00dc6bb318da2bece8035c7c71caac3
Reviewed-on: https://go-review.googlesource.com/34193
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Change the openbsd runtime to use the current sys_kill and sys_thrkill
system calls.
Prior to OpenBSD 5.9 the sys_kill system call could be used with both
processes and threads. In OpenBSD 5.9 this functionality was split into
a sys_kill system call for processes (with a new syscall number) and a
sys_thrkill system call for threads. The original/legacy system call was
retained in OpenBSD 5.9 and OpenBSD 6.0, however has been removed and
will not exist in the upcoming OpenBSD 6.1 release.
Note: This change is needed to make Go work on OpenBSD 6.1 (to be
released in May 2017) and should be included in the Go 1.8 release.
This change also drops support for OpenBSD 5.8, which is already an
unsupported OpenBSD release.
Change-Id: I525ed9b57c66c0c6f438dfa32feb29c7eefc72b0
Reviewed-on: https://go-review.googlesource.com/34093
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The pclntable contains pointers to functions. If the function symbol
is exported in a plugin, and there is a matching symbol in the host
binary, then the pclntable of a plugin ends up pointing at the
function in the host module.
This doesn't work because the traceback code expects the pointer to
be in the same module space as the PC value.
So don't export functions that might overlap with the host binary.
This way the pointer stays in its module.
Updates #18190
Change-Id: Ifb77605b35fb0a1e7edeecfd22b1e335ed4bb392
Reviewed-on: https://go-review.googlesource.com/34196
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Specify that that LimitedReader returns EOF when the underlying
R returns EOF even if bytes remaining, N > 0.
Fixes#18271
Change-Id: I990a7135f1d31488d535238ae061d42ee96bacb7
Reviewed-on: https://go-review.googlesource.com/34249
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Made many minor changes so that the document is consistent with itself.
Some more noticeable changes:
* CL/34141: Revert "testing: add T.Context method"
* CL/33630: net/http: document restrictions on ETag as expected by ServeContent
Change-Id: I39ae5e55c56e374895c115e6852998c940beae35
Reviewed-on: https://go-review.googlesource.com/34243
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
There is nothing notable to mention as far as users are concerned.
Fixes#17929 (another bug tracks the remaining TODO item)
Change-Id: Id39f787581ed9d2ecd493126bb7ca27836816d4b
Reviewed-on: https://go-review.googlesource.com/34145
Reviewed-by: Michael Matloob <matloob@golang.org>
This rolls back https://golang.org/cl/27117 partly, softening it so it
only retries POST/PUT/DELETE etc requests where there's no Body (nil
or NoBody). This is a little useless, since most idempotent requests
have a body (except maybe DELETE), but it's late in the Go 1.8 release
cycle and I want to do the proper fix.
The proper fix will look like what we did for http2 and only retrying
the request if Request.GetBody is defined, and then creating a new request
for the next attempt. See https://golang.org/cl/33971 for the http2 fix.
Updates #15723Fixes#18239
Updates #18241
Change-Id: I6ebaa1fd9b19b5ccb23c8d9e7b3b236e71cf57f3
Reviewed-on: https://go-review.googlesource.com/34134
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tom Bergan <tombergan@google.com>
The combination of two prior CLs can cause panics:
* CL/17873: make chained multiReader Read more efficient
* CL/28533: make MultiReader nil exhausted Readers for earlier GC
The first CL allows MultiReader to "inherit" another MultiReader's list of Readers
for efficiency reasons. This is problematic when combined with the
later CL since that can set prior Readers in that list to nil for GC reasons.
This causes panics when two MultiReaders are used together (even synchronously).
To fix this, rather than setting consumed Readers as nil, we set them with
a special eofReader that always returns EOF.
Fixes#18232
Change-Id: I2a9357ab217e3d54d38ea9022d18e4d14f4182d3
Reviewed-on: https://go-review.googlesource.com/34140
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This adds a counter for the number of times the application forced a
GC by, e.g., calling runtime.GC(). This is useful for detecting
applications that are overusing/abusing runtime.GC() or
debug.FreeOSMemory().
Fixes#18217.
Change-Id: I990ab7a313c1b3b7a50a3d44535c460d7c54f47d
Reviewed-on: https://go-review.googlesource.com/34067
Reviewed-by: Russ Cox <rsc@golang.org>
While processing a symbol for a function, if it is determined
that a function would make the text section too large then
a new text section is created and the address of the function
is in the new text section. But the symbol for the function
is marked as being in the previous text section, causing
incorrect codegen for the function and leading to a segv if
that function is called. This adds code to set the sym.Sect
field to the new section if a new one is created. Note that
this problem only happens at the point where a new section is
created.
Fixes#18218
Change-Id: Ic21ae11368d9d88ff6d5d3977f9ea72fe6477ed1
Reviewed-on: https://go-review.googlesource.com/34069
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When we copy the stack, we need to adjust all BPs.
We correctly adjust the ones on the stack, but we also
need to adjust the one that is in g.sched.bp.
Like CL 33754, no test as only kernel-gathered profiles will notice.
Tests will come (in 1.9) with the implementation of #16638.
The invariant should hold that every frame pointer points to
somewhere within its stack. After this CL, it is mostly true, but
something about cgo breaks it. The runtime checks are disabled
until I figure that out.
Update #16638Fixes#18174
Change-Id: I6023ee64adc80574ee3e76491d4f0fa5ede3dbdb
Reviewed-on: https://go-review.googlesource.com/33895
Reviewed-by: Austin Clements <austin@google.com>
Previously it was possible to craft a DSA private key that would cause
Sign() to loop forever because no signature could be valid. This change
does some basic sanity checks and ensures that Sign will always
terminate.
Thanks to Yolan Romailler for highing this.
Be aware, however, that it's still possible for an attacker to simply
craft a private key with enormous values and thus cause Sign to take an
arbitrary amount of time.
Change-Id: Icd53939e511eef513a4977305dd9015d9436d0ce
Reviewed-on: https://go-review.googlesource.com/33725
Reviewed-by: Yolan Romailler <y@romailler.ch>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
It is reported as failing for two people (issues #18202 and #18212).
The failure mode is that the system gets overloaded and other programs
fail to run.
Fixes#18202.
Change-Id: I1f1ca1f5d8eed6cc3a9dffac3289851e09fa662b
Reviewed-on: https://go-review.googlesource.com/34017
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Mention that the best-effort race detector on maps
was upgraded to detect write/iterate races.
Fixes#18137
Change-Id: Ib6e0adde47e965126771ea712386031a2a55eba3
Reviewed-on: https://go-review.googlesource.com/33768
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Conditioning on the plugin.Open symbol existing before loading all
symbols means sometimes some packages don't have a hash value.
Fixes#17928
Change-Id: I2722449aa58eca08a25117d3ce976f11f805b5ac
Reviewed-on: https://go-review.googlesource.com/33925
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For reasons that I do not know, OpenBSD does not call pthread_create
directly, but instead looks it up in libpthread.so. That means that we
can't use the code used on other systems to retry pthread_create on
EAGAIN, since that code simply calls pthread_create.
This patch copies that code to an OpenBSD-specific version.
Also, check for an EAGAIN failure in the test, as that seems to be the
underlying cause of the test failure on several systems including OpenBSD.
Fixes#18146.
Change-Id: I3bceaa1e03a7eaebc2da19c9cc146b25b59243ef
Reviewed-on: https://go-review.googlesource.com/33905
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In writebarrier phase, a chain of StoreWBs is rewritten to branchy
code to invoke write barriers, and the last store in the chain is
spliced into a Phi op to join the memory of the two branches. We
must find the last store explicitly, since the values are not
scheduled and they may not come in dependency order.
Fixes#18169.
Change-Id: If547e3c562ef0669bc5622c1bb711904dc36314d
Reviewed-on: https://go-review.googlesource.com/33915
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Since ffd1c781b7 HTML templates check
MIME type in the "type" attribute of "script" tag to decide if contents
should be escaped as JavaScript. The whitelist of MIME types did not
include application/json. Include it in this CL.
Fixes#18159
Change-Id: I17a8a38f2b7789b4b7e941d14279de222eaf2b6a
Reviewed-on: https://go-review.googlesource.com/33899
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Internal linking on an ELF system creates two reloc sections, which
must be adjacent. The default is to base section alignment on the
section size, but doing that for ELF reloc sections can introduce a
gap. Set the reloc section alignment explicitly to avoid that.
Fixes#18044.
Change-Id: I8ccc131e60937d30c5f715a34c7803258833fc2f
Reviewed-on: https://go-review.googlesource.com/33872
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The introduction of NoBody and related body-peeking bug fixes also
added a "cleanup" of sorts to make NewRequest set the returned
Requests's ContentLength to -1 when it didn't know it.
Using -1 to mean unknown is what the documentation says, but then
people apparently(?) depended on it being zero so they could do this:
req, _ := http.NewRequest("POST", url, someNonNilReaderWithUnkownSize)
req.Body = nil
res, err := http.DefaultClient.Do(req)
... and expect it to work.
After https://golang.org/cl/31445 the contrived(?) code above stopped
working, since Body was nil and ContentLength was -1, which has been
disallowed since Go 1.0.
So this restores the old behavior of NewRequest, not setting it to -1.
That part of the fix isn't required as of https://golang.org/cl/31726
(which added NoBody)
I still don't know whether this bug is hypothetical or actually
affected people in practice.
Let's assume it's real for now.
Fixes#18117
Change-Id: I42400856ee92a1a4999b5b4668bef97d885fbb53
Reviewed-on: https://go-review.googlesource.com/33801
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This file is entirely about the implementation of LineHist, and I can
never remember which generic filename in cmd/internal/obj has it.
Rename to line.go to match the already existing line_test.go.
Change-Id: Id01f3339dc550c9759569d5610d808b17bca44d0
Reviewed-on: https://go-review.googlesource.com/33803
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
func f() {
g()
}
We mistakenly don't add a frame pointer for f. This means f
isn't seen when walking the frame pointer linked list. That
matters for kernel-gathered profiles, and is an impediment for
issues like #16638.
To fix, allocate a stack frame even for otherwise frameless functions
like f. It is a bit tricky because we need to avoid some runtime
internals that really, really don't want one.
No test at the moment, as only kernel CPU profiles would catch it.
Tests will come with the implementation of #16638.
Fixes#18103
Change-Id: I411206cc9de4c8fdd265bee2e4fa61d161ad1847
Reviewed-on: https://go-review.googlesource.com/33754
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Darwin separately stores bits indicating whether a root certificate
should be trusted; this changes Go to read and use those when
initializing SystemCertPool.
Unfortunately, the trust API is very slow. To avoid a delay of up to
0.5s in initializing the system cert pool, we assume that
the trust settings found in kSecTrustSettingsDomainSystem will always
indicate trust. (That is, all root certs Apple distributes are trusted.)
This is not guaranteed by the API but is true in practice.
In the non-cgo codepath, we do not have that benefit, so we must check
the trust status of every certificate. This causes about 0.5s of delay
in initializing the SystemCertPool.
On OS X 10.11 and older, the "security" command requires a certificate
to be provided in a file and not on stdin, so the non-cgo codepath
creates temporary files for each certificate, further slowing initialization.
Updates #18141.
Change-Id: If681c514047afe5e1a68de6c9d40ceabbce54755
Reviewed-on: https://go-review.googlesource.com/33721
Run-TryBot: Quentin Smith <quentin@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Commit 303b69fe packed bitvectors more tightly, but missed a comment
describing their old layout. Update that comment.
Change-Id: I095ccb01f245197054252545f37b40605a550dec
Reviewed-on: https://go-review.googlesource.com/33718
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This fixes a bug in -l=3 or higher.
To inline a variadic function, the compiler generates code that constructs
a slice of arguments for the variadic parameter. Consider the function
func Foo(xs ...string)
and the call Foo("hello", "world"). To inline the call to Foo, the
compiler used to generate
xs := [2]string{"hello", "world"}[:]
which doesn't type check:
invalid operation [2]string literal[:] (slice of unaddressable value).
Now, the compiler generates
xs := []string{"hello", "world"}
which does type check.
Fixes#18116.
Change-Id: I0ee531ef2e6cc276db6fb12602b25a46d6d5db21
Reviewed-on: https://go-review.googlesource.com/33671
Reviewed-by: Keith Randall <khr@golang.org>
From the garbage collector's perspective, time can move backwards in
cgocall. However, in the midst of this time warp, the pointer
arguments to cgocall can go from dead back to live. If a stack growth
happens while they're dead and then a GC happens when they become live
again, GC can crash with a bad heap pointer.
Specifically, the sequence that leads to a panic is:
1. cgocall calls entersyscall, which saves the PC and SP of its call
site in cgocall. Call this PC/SP "X". At "X" both pointer arguments
are live.
2. cgocall calls asmcgocall. Call the PC/SP of this call "Y". At "Y"
neither pointer argument is live.
3. asmcgocall calls the C code, which eventually calls back into the
Go code.
4. cgocallbackg remembers the saved PC/SP "X" in some local variables,
calls exitsyscall, and then calls cgocallbackg1.
5. The Go code causes a stack growth. This stack unwind sees PC/SP "Y"
in the cgocall frame. Since the arguments are dead at "Y", they are
not adjusted.
6. The Go code returns to cgocallbackg1, which calls reentersyscall
with the recorded saved PC/SP "X", so "X" gets stashed back into
gp.syscallpc/sp.
7. GC scans the stack. It sees there's a saved syscall PC/SP, so it
starts the traceback at PC/SP "X". At "X" the arguments are considered
live, so it scans them, but since they weren't adjusted, the pointers
are bad, so it panics.
This issue started as of commit ca4089ad, when the compiler stopped
marking arguments as live for the whole function.
Since this is a variable liveness issue, fix it by adding KeepAlive
calls that keep the arguments live across this whole time warp.
The existing issue7978 test has all of the infrastructure for testing
this except that it's currently up to chance whether a stack growth
happens in the callback (it currently only happens on the
linux-amd64-noopt builder, for example). Update this test to force a
stack growth, which causes it to fail reliably without this fix.
Fixes#17785.
Change-Id: If706963819ee7814e6705693247bcb97a6f7adb8
Reviewed-on: https://go-review.googlesource.com/33710
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Be consistent with the argument names already provided. Also
parameter is the variable, argument is the value.
Fixes#18099
Change-Id: Idb3f4e9ffc214036c721ddb4f614ec6c95bb7778
Reviewed-on: https://go-review.googlesource.com/33660
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The code was intended to test that mux handler should redirect at
most once, but the added loop condition defeated that. Remove the
loop condition and document the intention better.
Fixes#18068.
Change-Id: I2a4ea041eae27168b45a09aa46e740ac03921594
Reviewed-on: https://go-review.googlesource.com/33654
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
The doc field is not yet used - remove it for now (we may end up
with a different solution for 1.9). This reduces memory consumption
for parsing all of std lib by about 40MB and makes parsing slightly
faster.
Change-Id: Iafb00b9c7f1be9c66fdfb29096d3da5049b2fcf5
Reviewed-on: https://go-review.googlesource.com/33661
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When context methods were initially added it was attempted to unify
behavior between drivers without Context methods and those with
Context methods to always return right away when the Context expired.
However in doing so the driver call could be executed outside of the
scope of the driver connection lock and thus bypassing thread safety.
The new behavior waits until the driver operation is complete. It then
checks to see if the context has expired and if so returns that error.
Change-Id: I4a5c7c3263420c57778f36a5ed6fa0ef8cb32b20
Reviewed-on: https://go-review.googlesource.com/32422
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Skip lines if they are empty or starting with "#" which are valid
legacy pprof output format.
Fixes#18025
Change-Id: I7aee439171496932637b8ae3188700911f569b16
Reviewed-on: https://go-review.googlesource.com/33454
Reviewed-by: Peter Weinberger <pjw@google.com>
Android's libc doesn't provide access to auxv, so currently the Go
runtime synthesizes a fake, minimal auxv when loaded as a library on
Android. This used to be sufficient, but now we depend on auxv to
retrieve the system physical page size and panic if we can't retrieve
it.
Fix this by falling back to reading auxv from /proc/self/auxv if the
loader-provided auxv is empty and removing the synthetic auxv vectors.
Fixes#18041.
Change-Id: Ia2ec2c764a6609331494a5d359032c56cbb83482
Reviewed-on: https://go-review.googlesource.com/33652
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Tested by running
GOTRACEBACK=2 CGO_CFLAGS="-Wa,--elf-stt-common=yes" go test -ldflags=-linkmode=internal
in misc/cgo/test. That failed before this CL, succeeded after.
I don't think it's worth doing that as a regular test, though,
especially since only recent versions of the GNU binutils support the
--elf-stt-common option.
Fixes#18088.
Change-Id: I893d86181faee217b1504c054b0ed3f7c8d977d3
Reviewed-on: https://go-review.googlesource.com/33653
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Go 1.5 worked with Unicode console input but not ^Z.
Go 1.6 did not work with Unicode console input but did handle one ^Z case.
Go 1.7 did not work with Unicode console input but did handle one ^Z case.
The intent of this CL is for Go 1.8 to work with Unicode console input
and also handle all ^Z cases.
Here's a simple test program for reading from the console.
It prints a "> " prompt, calls read, prints what it gets, and repeats.
package main
import (
"fmt"
"os"
)
func main() {
p := make([]byte, 100)
fmt.Printf("> ")
for {
n, err := os.Stdin.Read(p)
fmt.Printf("[%d %q %v]\n> ", n, p[:n], err)
}
}
On Unix, typing a ^D produces a break in the input stream.
If the ^D is at the beginning of a line, then the 0 bytes returned
appear as an io.EOF:
$ go run /tmp/x.go
> hello
[6 "hello\n" <nil>]
> hello^D[5 "hello" <nil>]
> ^D[0 "" EOF]
> ^D[0 "" EOF]
> hello^Dworld
[5 "hello" <nil>]
> [6 "world\n" <nil>]
>
On Windows, the EOF character is ^Z, not ^D, and there has
been a long-standing problem that in Go programs, ^Z on Windows
does not behave in the expected way, namely like ^D on Unix.
Instead, the ^Z come through as literal ^Z characters:
C:\>c:\go1.5.4\bin\go run x.go
> ^Z
[3 "\x1a\r\n" <nil>]
> hello^Zworld
[13 "hello\x1aworld\r\n" <nil>]
>
CL 4310 attempted to fix this bug, then known as #6303,
by changing the use of ReadConsole to ReadFile.
This CL was released as part of Go 1.6 and did fix the case
of a ^Z by itself, but not as part of a larger input:
C:\>c:\go1.6.3\bin\go run x.go
> ^Z
[0 "" EOF]
> hello^Zworld
[13 "hello\x1aworld\r\n" <nil>]
>
So the fix was incomplete.
Worse, the fix broke Unicode console input.
ReadFile does not handle Unicode console input correctly.
To handle Unicode correctly, programs must use ReadConsole.
Early versions of Go used ReadFile to read the console,
leading to incorrect Unicode handling, which was filed as #4760
and fixed in CL 7312053, which switched to ReadConsole
and was released as part of Go 1.1 and still worked as of Go 1.5:
C:\>c:\go1.5.4\bin\go run x.go
> hello
[7 "hello\r\n" <nil>]
> hello world™
[16 "hello world™\r\n" <nil>]
>
But in Go 1.6:
C:\>c:\go1.6.3\bin\go run x.go
> hello
[7 "hello\r\n" <nil>]
> hello world™
[0 "" EOF]
>
That is, changing back to ReadFile in Go 1.6 reintroduced #4760,
which has been refiled as #17097. (We have no automated test
for this because we don't know how to simulate console input
in a test: it appears that one must actually type at a keyboard
to use the real APIs. This CL at least adds a comment warning
not to reintroduce ReadFile again.)
CL 29493 attempted to fix#17097, but it was not a complete fix:
the hello world™ example above still fails, as does Shift-JIS input,
which was filed as #17939.
CL 29493 also broke ^Z handling, which was filed as #17427.
This CL attempts the never before successfully performed trick
of simultaneously fixing Unicode console input and ^Z handling.
It changes the console input to use ReadConsole again,
as in Go 1.5, which seemed to work for all known Unicode input.
Then it adds explicit handling of ^Z in the input stream.
(In the case where standard input is a redirected file, ^Z processing
should not happen, and it does not, because this code path is only
invoked when standard input is the console.)
With this CL:
C:\>go run x.go
> hello
[7 "hello\r\n" <nil>]
> hello world™
[16 "hello world™\r\n" <nil>]
> ^Z
[0 "" EOF]
> [2 "\r\n" <nil>]
> hello^Zworld
[5 "hello" <nil>]
> [0 "" EOF]
> [7 "world\r\n" <nil>]
This almost matches Unix:
$ go run /tmp/x.go
> hello
[6 "hello\n" <nil>]
> hello world™
[15 "hello world™\n" <nil>]
> ^D
[0 "" EOF]
> [1 "\n" <nil>]
> hello^Dworld
[5 "hello" <nil>]
> [6 "world\n" <nil>]
>
The difference is in the handling of hello^Dworld / hello^Zworld.
On Unix, hello^Dworld terminates the read of hello but does not
result in a zero-length read between reading hello and world.
This is dictated by the tty driver, not any special Go code.
On Windows, in this CL, hello^Zworld inserts a zero length read
result between hello and world, which is treated as an interior EOF.
This is implemented by the Go code in this CL, but it matches the
handling of ^Z on the console in other programs:
C:\>copy con x.txt
hello^Zworld
1 file(s) copied.
C:\>type x.txt
hello
C:\>
A natural question is how to test all this. As noted above, we don't
know how to write automated tests using the actual Windows console.
CL 29493 introduced the idea of substituting a different syscall.ReadFile
implementation for testing; this CL continues that idea but substituting
for syscall.ReadConsole instead. To avoid the regression of putting
ReadFile back, this CL adds a comment warning against that.
Fixes#17427.
Fixes#17939.
Change-Id: Ibaabd0ceb2d7af501d44ac66d53f64aba3944142
Reviewed-on: https://go-review.googlesource.com/33451
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The pprof code discards all heap allocations made by runtime
routines. This caused it to discard heap allocations made by functions
called by reflect.Call, as the calls are made via the functions
`runtime.call32`, `runtime.call64`, etc. Fix the profiler to retain
these heap allocations.
Fixes#18077.
Change-Id: I8962d552f1d0b70fc7e6f7b2dbae8d5bdefb0735
Reviewed-on: https://go-review.googlesource.com/33635
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Document that key in Header.Get(key) is case insensitive in
http.Header, mail.Header, textproto.Header.
Fixes#18019
Change-Id: Iba7932491e02e555190b6fce053088b580a853ef
Reviewed-on: https://go-review.googlesource.com/33530
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The element index needs to be placed in From3. Before this CL it
was impossible to write a VSTE instruction that could be
successfully parsed, so this won't affect existing assembly code.
Fixes#18075.
Change-Id: I5b71be4c6632b1d5a30820a529122f96fd1bc864
Reviewed-on: https://go-review.googlesource.com/33584
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The TestMain docs explain that flag.Parse() should be called if TestMain
itself depends on command-line flags.
The issue here is that the example implementation does not use any
flags, and thus the flag.Parse call is unnecessary. This leads to people
who use this example as a starting point for their own implementations
to forget that the call is not necessary in most cases.
Comment it out instead of removing the line to keep it as a reminder, as
suggested by Minux Ma.
Change-Id: I6ffc5413e7036366ae3cf0f069b7065e832a3b45
Reviewed-on: https://go-review.googlesource.com/33273
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When transitioning from C code to Go code we must respect the C
calling convention. On s390x this means that r6-r13, r15 and f8-f15
must be saved and restored by functions that use them.
On s390x we were saving the wrong set of floating point registers
(f0, f2, f4 and f6) rather than f8-f15 which means that Go code
could clobber registers that C code expects to be restored. This
CL modifies the crosscall functions on s390x to save/restore the
correct floating point registers.
Fixes#18035.
Change-Id: I5cc6f552c893a4e677669c8891521bf735492e97
Reviewed-on: https://go-review.googlesource.com/33571
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There is some code value too: types intending to implement
Source64 can write a conversion confirming that.
For #4254 and the Go 1.8 release notes.
Change-Id: I7fc350a84f3a963e4dab317ad228fa340dda5c66
Reviewed-on: https://go-review.googlesource.com/33456
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 32796 changes the SIGPIPE behaviour for c-archive and c-shared
programs. Add it to go1.8.txt.
Change-Id: I31200187033349c642965a4bb077bcc77d5329a3
Reviewed-on: https://go-review.googlesource.com/33397
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TestPendingConnsAfterErr showed a failure on slower systems.
Wait and check for the database to close all connections
before pronouncing failure.
A more careful method was attempted but the connection pool
behavior is too dependent on the scheduler behavior to be
predictable.
Fixes#15684
Change-Id: Iafdbc90ba51170c76a079db04c3d5452047433a4
Reviewed-on: https://go-review.googlesource.com/33418
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Applies the fix from CL 32920 to the new test TestSampledHeapAllocProfile
introduced in CL 33422. The test should be skipped rather than fail if
there is only one executable region of memory.
Updates #17852.
Change-Id: Id8c47b1f17ead14f02a58a024c9a04ebb8ec0429
Reviewed-on: https://go-review.googlesource.com/33453
Run-TryBot: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The expected default behavior (no explicit GOTRACEBACK setting)
is for the stack trace to start in user code, eliding unnecessary runtime
frames that led up to the actual trace printing code. The idea was that
the first line number printed was the one that crashed.
For #5832 we added code to show 'panic' frames so that if code panics
and then starts running defers and then we trace from there, the panic
frame can help explain why the code seems to have made a call not
present in the code. But that's only needed for panics between two different
call frames, not the panic at the very top of the stack trace.
Fix the fix to again elide the runtime code at the very top of the stack trace.
Simple panic:
package main
func main() {
var x []int
println(x[1])
}
Before this CL:
panic: runtime error: index out of range
goroutine 1 [running]:
panic(0x1056980, 0x1091bf0)
/Users/rsc/go/src/runtime/panic.go:531 +0x1cf
main.main()
/tmp/x.go:5 +0x5
After this CL:
panic: runtime error: index out of range
goroutine 1 [running]:
main.main()
/tmp/x.go:5 +0x5
Panic inside defer triggered by panic:
package main
func main() {
var x []int
defer func() {
println(x[1])
}()
println(x[2])
}
Before this CL:
panic: runtime error: index out of range
panic: runtime error: index out of range
goroutine 1 [running]:
panic(0x1056aa0, 0x1091bf0)
/Users/rsc/go/src/runtime/panic.go:531 +0x1cf
main.main.func1(0x0, 0x0, 0x0)
/tmp/y.go:6 +0x62
panic(0x1056aa0, 0x1091bf0)
/Users/rsc/go/src/runtime/panic.go:489 +0x2cf
main.main()
/tmp/y.go:8 +0x59
The middle panic is important: it explains why main.main ended up calling main.main.func1 on a line that looks like a call to println. The top panic is noise.
After this CL:
panic: runtime error: index out of range
panic: runtime error: index out of range
goroutine 1 [running]:
main.main.func1(0x0, 0x0, 0x0)
/tmp/y.go:6 +0x62
panic(0x1056ac0, 0x1091bf0)
/Users/rsc/go/src/runtime/panic.go:489 +0x2cf
main.main()
/tmp/y.go:8 +0x59
Fixes#17901.
Change-Id: Id6d7c76373f7a658a537a39ca32b7dc23e1e76aa
Reviewed-on: https://go-review.googlesource.com/33165
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When I added t.Parallel to some tests earlier, I overlooked some using
the global "Get" func, which uses DefaultTransport.
The DefaultTransport can have its CloseIdleConnections called by other
parallel tests. Use a private Transport instead.
Fixes#18006
Change-Id: Ia4faca5bac235cfa95dcf2703c25f3627112a5e9
Reviewed-on: https://go-review.googlesource.com/33432
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When we raise a signal that was delivered to C code, it's possible that
the kernel will not deliver it immediately. This is especially possible
on Darwin where we use send the signal to the entire process rather than
just the current thread. Sleep for a millisecond after sending the
signal to give it a chance to be delivered before we restore the Go
signal handler. In most real cases the program is going to crash at this
point, so sleeping is kind of irrelevant anyhow.
Fixes#14809.
Change-Id: Ib2c0d2c4e240977fb4535dc1dd2bdc50d430eb85
Reviewed-on: https://go-review.googlesource.com/33300
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
When CC is set in the environment, the mkEnv function sets its version
of CC to the first word $CC and sets GOGCCFLAGS to the remainder. That
worked since Go 1 but was broken accidentally by
https://golang.org/cl/6409, which changed the code such that `go env`
calls mkEnv twice. The second call to mkEnv would clobber GOGCCFLAGS
based on the value of CC set by the first call. Go back to the old
handling by only calling mkEnv once.
Fixes#15457.
Change-Id: I000a1ebcc48684667e48f2b9b24605867b9e06cd
Reviewed-on: https://go-review.googlesource.com/33293
Reviewed-by: Russ Cox <rsc@golang.org>
Introduce R_WEAKADDROFF, a "weak" variation of the R_ADDROFF relocation
that will only reference the type described if it is in some other way
reachable.
Use this for the ptrToThis field in reflect type information where it
is safe to do so (that is, types that don't need to be included for
interface satisfaction, and types that won't cause the compiler to
recursively generate an endless series of ptr-to-ptr-to-ptr-to...
types).
Also fix a small bug in reflect, where StructOf was not clearing the
ptrToThis field of new types.
Fixes#17931
Change-Id: I4d3b53cb9c916c97b3b16e367794eee142247281
Reviewed-on: https://go-review.googlesource.com/33427
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
After x.ProbablyPrime(n) passes the n Miller-Rabin rounds,
add a Baillie-PSW test before declaring x probably prime.
Although the provable error bounds are unchanged, the empirical
error bounds drop dramatically: there are no known inputs
for which Baillie-PSW gives the wrong answer. For example,
before this CL, big.NewInt(443*1327).ProbablyPrime(1) == true.
Now it is (correctly) false.
The new Baillie-PSW test is two pieces: an added Miller-Rabin
round with base 2, and a so-called extra strong Lucas test.
(See the references listed in prime.go for more details.)
The Lucas test takes about 3.5x as long as the Miller-Rabin round,
which is close to theoretical expectations.
name time/op
ProbablyPrime/Lucas 2.91ms ± 2%
ProbablyPrime/MillerRabinBase2 850µs ± 1%
ProbablyPrime/n=0 3.75ms ± 3%
The speed of prime testing for a prime input does get slower:
name old time/op new time/op delta
ProbablyPrime/n=1 849µs ± 1% 4521µs ± 1% +432.31% (p=0.000 n=10+9)
ProbablyPrime/n=5 4.31ms ± 3% 7.87ms ± 1% +82.70% (p=0.000 n=10+10)
ProbablyPrime/n=10 8.52ms ± 3% 12.28ms ± 1% +44.11% (p=0.000 n=10+10)
ProbablyPrime/n=20 16.9ms ± 2% 21.4ms ± 2% +26.35% (p=0.000 n=9+10)
However, because the Baillie-PSW test is only added when the old
ProbablyPrime(n) would return true, testing composites runs at
the same speed as before, except in the case where the result
would have been incorrect and is now correct.
In particular, the most important use of this code is for
generating random primes in crypto/rand. That use spends
essentially all its time testing composites, so it is not
slowed down by the new Baillie-PSW check:
name old time/op new time/op delta
Prime 104ms ±22% 111ms ±16% ~ (p=0.165 n=10+10)
Thanks to Serhat Şevki Dinçer for CL 20170, which this CL builds on.
Fixes#13229.
Change-Id: Id26dde9b012c7637c85f2e96355d029b6382812a
Reviewed-on: https://go-review.googlesource.com/30770
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The gccgo compiler does not have the standard packages available, so it
can not check for violations of internal references.
Also, the gccgo compiler can not read runtime/internal/sys/zversion.go;
in fact, the file does not even exist for gccgo.
Change-Id: Ibadf16b371621ad1b87b6e858c5eb233913e179d
Reviewed-on: https://go-review.googlesource.com/33295
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We recently added these large zip64 tests. They're slow-ish already,
but fast enough in non-race mode with t.Parallel. But in race mode,
the concurrency makes them much slower than the normal
non-race-to-race multiplier.
They're taking so long now that it's causing test failures when it
sometimes is over the test timeout threshold.
Change-Id: I02f4ceaa9d6cab826708eb3860f47a57b05bdfee
Reviewed-on: https://go-review.googlesource.com/33423
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
count profiles with debug=1 retain their previous format.
Also add a test check for the proto profiles since all runtime/pprof
tests only look at the debug=1 profiles.
Change-Id: Ibe805585b597e5d3570807115940a1dc4535c03f
Reviewed-on: https://go-review.googlesource.com/33148
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
If the scheduler has no user work and there's no GC work visible, it
puts the P to sleep (or blocks on the network). However, if we later
enqueue more GC work, there's currently nothing that specifically
wakes up the scheduler to let it start an idle GC worker. As a result,
we can underutilize the CPU during GC if Ps have been put to sleep.
Fix this by making GC wake idle Ps when work buffers are put on the
full list. We already have a hook to do this, since we use this to
preempt a random P if we need more dedicated workers. We expand this
hook to instead wake an idle P if there is one. The logic we use for
this is identical to the logic used to wake an idle P when we ready a
goroutine.
To make this really sound, we also fix the scheduler to re-check the
idle GC worker condition after releasing its P. This closes a race
where 1) the scheduler checks for idle work and finds none, 2) new
work is enqueued but there are no idle Ps so none are woken, and 3)
the scheduler releases its P.
There is one subtlety here. Currently we call enlistWorker directly
from putfull, but the gcWork is in an inconsistent state in the places
that call putfull. This isn't a problem right now because nothing that
enlistWorker does touches the gcWork, but with the added call to
wakep, it's possible to get a recursive call into the gcWork
(specifically, while write barriers are disallowed, this can do an
allocation, which can dispose a gcWork, which can put a workbuf). To
handle this, we lift the enlistWorker calls up a layer and delay them
until the gcWork is in a consistent state.
Fixes#14179.
Change-Id: Ia2467a52e54c9688c3c1752e1fc00f5b37bbfeeb
Reviewed-on: https://go-review.googlesource.com/32434
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Idle GC workers trigger whenever there's a GC running and the
scheduler doesn't find any other work. However, they currently run for
a full scheduler quantum (~10ms) once started.
This is really bad for event-driven applications, where work may come
in on the network hundreds of times during that window. In the
go-gcbench rpc benchmark, this is bad enough to often cause effective
STWs where all Ps are in the idle worker. When this happens, we don't
even poll the network any more (except for the background 10ms poll in
sysmon), so we don't even know there's more work to do.
Fix this by making idle workers check with the scheduler roughly every
100 µs to see if there's any higher-priority work the P should be
doing. This check includes polling the network for incoming work.
Fixes#16528.
Change-Id: I6f62ebf6d36a92368da9891bafbbfd609b9bd003
Reviewed-on: https://go-review.googlesource.com/32433
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Use an explicit ./ to make sure we link against the libgo.so we just
built, not some other libgo.so that the compiler or linker may decide to
seek out.
Fixes#17986.
Change-Id: Id23f6c95aa2b52f4f42c1b6dac45482c22b4290d
Reviewed-on: https://go-review.googlesource.com/33413
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This matches what we already do for switch statements and makes
this large section more visibly organized. No other changes besides
introducing the titles.
Fixes#4486.
Change-Id: I73f274e4fdd27c6cfeaed79090b4553e57a9c479
Reviewed-on: https://go-review.googlesource.com/33410
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Currently, trace processing interleaves state/statistics updates and
emitting trace viewer objects. As a result, if events are being
filtered, either by time or by goroutines, we'll miss those
state/statistics updates. At best, this leads to bad statistics;
however, since we're now strictly checking G state transitions, it
usually leads to a failure to process the trace if there is any
filtering.
Fix this by separating state updates from emitting trace object. State
updates are done before filtering, so we always have correct state
information and statistics. Trace objects are only emitted if we pass
the filter. To determine when we need to emit trace counters, rather
than duplicating the knowledge of which events might modify
statistics, we keep track of the previously emitted counters and emit
a trace counter object whenever these have changed.
Fixes#17719.
Change-Id: Ic66e3ddaef60d1acaaf2ff4c62baa5352799cf99
Reviewed-on: https://go-review.googlesource.com/32810
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
- organize examples better
- add an example illustrating behavior if element type is a named pointer type
- both compilers and go/types (per https://go-review.googlesource.com/33358)
follow this now
See the issue for detailed discussion.
Fixes#17954.
Change-Id: I8d90507ff2347d9493813f75b73233819880d2b4
Reviewed-on: https://go-review.googlesource.com/33361
Reviewed-by: Rob Pike <r@golang.org>
The existing implementation of text/template handles the option
"missingkey=error" in an inconsitent manner: If the provided data is
a nil-interface, no error is returned (despite the fact that no key
can be found in it).
This patch makes text/template return an error if "missingkey=error"
is set and the provided data is a not a valid reflect.Value.
Fixes#15356
Change-Id: Ia0a83da48652ecfaf31f18bdbd78cb21dbca1164
Reviewed-on: https://go-review.googlesource.com/31638
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Before this CL, Go programs in c-archive or c-shared buildmodes
would not handle SIGPIPE. That leads to surprising behaviour where
writes on a closed pipe or socket would raise SIGPIPE and terminate
the program. This CL changes the Go runtime to handle
SIGPIPE regardless of buildmode. In addition, SIGPIPE from non-Go
code is forwarded.
Fixes#17393
Updates #16760
Change-Id: I155e82020a03a5cdc627a147c27da395662c3fe8
Reviewed-on: https://go-review.googlesource.com/32796
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When the CT extension is enabled but no SCTs are present, the existing
code calls "continue" which causes resizing the data byte slice to be
skipped. In fact, such extensions should be rejected.
Fixes#17958
Change-Id: Iad12da10d1ea72d04ae2e1012c28bb2636f06bcd
Reviewed-on: https://go-review.googlesource.com/33265
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently there are no diagnostics for mark root check during marking.
Fix this by printing out the same diagnostics we print during mark
termination.
Also, drop the allglock before throwing. Holding that across a throw
causes a self-deadlock with tracebackothers.
For #16083.
Change-Id: Ib605f3ae0c17e70704b31d8378274cfaa2307dc2
Reviewed-on: https://go-review.googlesource.com/33339
Reviewed-by: Rick Hudson <rlh@golang.org>
The top-level qualifiers are unimportant for our purposes. If a C
function is defined as `const int f(const int i)`, the `const`s are
meaningless to C, and we want to avoid using them in the struct we
create where the `const` has a completely different meaning.
This unwinds https://golang.org/cl/33097 with regard to top-level
qualifiers.
Change-Id: I3d66b0eb43b6d9a586d9cdedfae5a2306b46d96c
Reviewed-on: https://go-review.googlesource.com/33325
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Previously driver.Stmt could could be closed multiple times in
edge cases that drivers may not test for initially. Make their
job easier by ensuring the driver is only closed a single time.
Fixes#16019
Change-Id: I1e4777ef70697a849602e6ef9da73054a8feb4cd
Reviewed-on: https://go-review.googlesource.com/33352
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 33239 changed the polling loops from using sched_yield to a sleep
for 1/1000 of a second. The loop counters were not updated, so failing
tests now take 100 seconds to complete. Lower the loop counts to 5
seconds instead.
Change-Id: I7c9a343dacc8188603ecf7e58bd00b535cfc87f5
Reviewed-on: https://go-review.googlesource.com/33280
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TestReadStdin always fill up buffer provided by ReadFile caller full.
But we do not know if real ReadFile does the same. Add tests where
buffer is only filled with limited data.
Change-Id: I0fc776325c2b1fe60511126c439f4b0560e9d653
Reviewed-on: https://go-review.googlesource.com/33030
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CIDRMask just returns a mask which corresponds to an address
prefix in CIDR nonation. A subnet for an IPv6 mask sounds a bit
confusing.
Change-Id: Ic7859ce992bc2de4043d3b25caf9a1051d118b0e
Reviewed-on: https://go-review.googlesource.com/33262
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If a program has had its text section split into multiple
sections then the ftab that is built is based on addresses
prior to splitting. That means all the function addresses
are there and correct because of relocation but the
but the computed idx won't always match up quite right and
in some cases go beyond the end of the table, causing a panic.
To resolve this, determine if the idx is too large and if it is,
set it to the last index in ftab. Then search backward to find the
matching function address.
Fixes#17854
Change-Id: I6940e76a5238727b0a9ac23dc80000996db2579a
Reviewed-on: https://go-review.googlesource.com/32972
Reviewed-by: David Chase <drchase@google.com>
It's possible for the pkgPath of a field to be different than that of
the struct type as a whole. In that case, store the field's pkgPath in
the name field. Use the field's pkgPath when setting PkgPath and when
checking for type identity.
Fixes#17952.
Change-Id: Iebaf92f0054b11427c8f6e4158c3bebcfff06f45
Reviewed-on: https://go-review.googlesource.com/33333
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Failing to create the output file would give confusing errors such as:
cover: invalid argument
Also do out.Close() even if Execute() errored.
Fixes#17951.
Change-Id: I897e1d31f7996871c54fde7cb09614cafbf6c3fc
Reviewed-on: https://go-review.googlesource.com/33278
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
The previous documentation purported to convert underlying strings to
[]byte, which it did not do. This adds support for underlying bool,
string, and []byte, which convert directly to their underlying type.
Fixes#15174.
Change-Id: I7fc4e2520577f097a48f39c9ff6c8160fdfb7be4
Reviewed-on: https://go-review.googlesource.com/27812
Reviewed-by: Daniel Theophanes <kardianos@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
I had trouble translating the documentation language into a subnet
- e.g. whether /31 was CIDRMask(1, 31) or CIDRMask(1, 32) or
CIDRMask(31, 32) so I thought I'd add a short example showing how to
create the right masks.
Change-Id: Ia6a6de08c5c30b6d2249b3194cced2d3c383e317
Reviewed-on: https://go-review.googlesource.com/32677
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Zero out the sigaction structs, in case the sa_restorer field is set.
Clear the SA_RESTORER flag; it is part of the kernel interface, not the
libc interface.
Fixes#17947.
Change-Id: I610348ce3c196d3761cf2170f06c24ecc3507cf7
Reviewed-on: https://go-review.googlesource.com/33331
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Autotmp filtering was too aggressive and excluded types
necessary to make debuggers work properly. Restore the
"late filter" in dwarf.go based on names to exclude autotmps,
and remove the "early filter" in pgen.go based on how the
name was introduced. However, the updated naming scheme
with a dot prefix is retained to prevent accidental clashes
with legal Go identifier names.
Includes test (grouped with runtime gdb tests),
verified to fail without the fix.
Updates #17644.
Fixes#17830.
Change-Id: I7ec3f7230083889660236e5f6bc77ba5fe434e93
Reviewed-on: https://go-review.googlesource.com/33233
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This change makes use of synchronization primitive instead of
context-based canceling not to depend on defer execution scheduling.
Fixes#17927.
Change-Id: I5ca9287a48bb5cdda6845a7f12757f95175c5db8
Reviewed-on: https://go-review.googlesource.com/33257
Reviewed-by: Ian Lance Taylor <iant@golang.org>
To generate the correct section offset the shared code path for
R_CALL, R_PCREL, and R_GOTPCREL on darwin when externally linking
walks up the symbol heirarchy adding the differences. This is fine,
except in the case where we are generating a GOT lookup, because
the topmost symbol is left in r.Xsym instead of the symbol we are
looking up. So all funcsym GOT lookups were looking up the outer
"go.func.*" symbol.
Fix this by separating out the R_GOTPCREL code path.
For #17828 (and may fix it).
Change-Id: I2c9f4d135e77c17270aa064d8c876dc6d485d659
Reviewed-on: https://go-review.googlesource.com/33211
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The test requires tons of memory and results various failures, mainly
runtime errors and process termination by SIGKILL, caused by resource
exhaustion when the node under test doesn't have much resources.
This change makes use of -tcpbig flag to enable the test.
Change-Id: Id53fa5d88543e2e60ca9bb4f55a1914ccca844e1
Reviewed-on: https://go-review.googlesource.com/33254
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This ensures that runtime's signal handlers pass through the TSAN and
MSAN libc interceptors and subsequent calls to the intercepted
sigaction function from C will correctly see them.
Fixes#17753.
Change-Id: I9798bb50291a4b8fa20caa39c02a4465ec40bb8d
Reviewed-on: https://go-review.googlesource.com/33142
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add an explicit WriteString method to closeOnce that acquires the
writers lock. This overrides the one promoted from the
embedded *os.File field. The promoted one naturally does not acquire
the lock, and can therefore race with the Close method.
Fixes#17647.
Change-Id: I3460f2a0d503449481cfb2fd4628b4855ab0ecdf
Reviewed-on: https://go-review.googlesource.com/33298
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If a C union type (or a C++ class type) can contain a pointer field,
then run the cgo checks on pointers to that type. This will test the
pointer as though it were an unsafe.Pointer, and will crash if it points
to Go memory that contains a pointer.
Fixes#15942.
Change-Id: Ic2d07ed9648d4b27078ae7683e26196bcbc59fc9
Reviewed-on: https://go-review.googlesource.com/33237
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In plugins and every program that opens a plugin, include a hash of
every imported package.
There are two versions of each hash: one local and one exported.
As the program starts and plugins are loaded, the first exported
symbol for each package becomes the canonical version.
Any subsequent plugin's local package hash symbol has to match the
canonical version.
Fixes#17832
Change-Id: I4e62c8e1729d322e14b1673bada40fa7a74ea8bc
Reviewed-on: https://go-review.googlesource.com/33161
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Apparently when GOMAXPROCS == 1 a simple sched_yield in a tight loop is
not necessarily sufficient to permit a signal handler to run. Instead,
sleep for 1/1000 of a second.
Fixes#16649.
Change-Id: I83910144228556e742b7a92a441732ef61aa49d9
Reviewed-on: https://go-review.googlesource.com/33239
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change redoes the fix for #16101 (CL 31092) in a different way by
making t.Clone return the template associated with the t.Name() while
allowing for the case that a template of the same name is define-d.
Fixes#17735.
Change-Id: I1e69672390a4c81aa611046a209008ae4a3bb723
Reviewed-on: https://go-review.googlesource.com/33210
Run-TryBot: Caleb Spare <cespare@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Instead of scanning the text to count newlines, which is n², keep track as we go
and store the line number in the token.
benchmark old ns/op new ns/op delta
BenchmarkParseLarge-4 1589721293 38783310 -97.56%
Fixes#17851
Change-Id: I231225c61e667535e2ce55cd2facea6d279cc59d
Reviewed-on: https://go-review.googlesource.com/33234
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Instead of scanning the text to count newlines, which is n², keep track as we go
and store the line number in the token.
benchmark old ns/op new ns/op delta
BenchmarkParseLarge-4 1589721293 38783310 -97.56%
Fixes#17851
Change-Id: Ieaf89a35e371b405ad92e38baa1e3fa98d18cfb4
Reviewed-on: https://go-review.googlesource.com/32923
Reviewed-by: Robert Griesemer <gri@golang.org>
These are functionality tests, not formatter tests.
I also tested manually that 'go test cmd/go'
without -short still passes.
Change-Id: Id146e1dc3b65e19ea531869725cd0b97f4801b8b
Reviewed-on: https://go-review.googlesource.com/33169
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously, `os.Clearenv()` (by way of `syscall.Clearenv`) would simply
set all environment variables' values to `""` rather than actually
unsetting them causing subsequent `os.LookupEnv` calls to return that
they were still set.
Fixes#17902
Change-Id: I54081b4b98665e9a39f55ea7582c8d40bb8a2a22
Reviewed-on: https://go-review.googlesource.com/33168
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Deadlines have been implemented on Plan 9 in CL 31521.
Enable the following tests:
- TestServerTimeouts
- TestOnlyWriteTimeout
- TestTLSHandshakeTimeout
- TestIssue4191_InfiniteGetTimeout
- TestIssue4191_InfiniteGetToPutTimeout
Updates #7237.
Change-Id: If5e75cfaa9133dcf9ce6aac9fc2badafc1612b64
Reviewed-on: https://go-review.googlesource.com/33197
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Mention that it specifically returns x / 2, and do the same for
EncodedLen.
Change-Id: Ie334f5abecbc487caf4965abbcd14442591bef2a
Change-Id: Idfa413faad487e534489428451bf736b009293d6
Reviewed-on: https://go-review.googlesource.com/33191
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Add a variant of sync/atomic's TestUnaligned64 to
runtime/internal/atomic.
Skips the test on arm for now where it's currently failing.
Updates #17786
Change-Id: If63f9c1243e9db7b243a95205b2d27f7d1dc1e6e
Reviewed-on: https://go-review.googlesource.com/33159
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change is an experimental implementation of asynchronous
cancelable I/O operations on Plan 9, which are required to
implement deadlines.
There are no asynchronous syscalls on Plan 9. I/O operations
are performed with blocking pread and pwrite syscalls.
Implementing deadlines in Go requires a way to interrupt
I/O operations.
It is possible to interrupt reads and writes on a TCP connection
by forcing the closure of the TCP connection. This approach
has been used successfully in CL 31390.
However, we can't implement deadlines with this method, since
we require to be able to reuse the connection after the timeout.
On Plan 9, I/O operations are interrupted when the process
receives a note. We can rely on this behavior to implement
a more generic approach.
When doing an I/O operation (read or write), we start the I/O in
its own process, then wait for the result asynchronously. The
process is able to handle the "hangup" note. When receiving the
"hangup" note, the currently running I/O operation is canceled
and the process returns.
This way, deadlines can be implemented by sending an "hangup"
note to the process running the blocking I/O operation, after
the expiration of a timer.
Fixes#11932.
Fixes#17498.
Change-Id: I414f72c7a9a4f9b8f9c09ed3b6c269f899d9b430
Reviewed-on: https://go-review.googlesource.com/31521
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
1e-9 has a 1 in the last place, causing some Duration calculations to
have unnecessary rounding errors. 1e9 does not, so use that instead.
Change-Id: I96334a2c47e7a014b532eb4b8a3ef9550e7ed057
Reviewed-on: https://go-review.googlesource.com/33116
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The tree is inconsistent about single l vs double l in those
words in documentation, test messages, and one error value text.
$ git grep -E '[Mm]arshall(|s|er|ers|ed|ing)' | wc -l
42
$ git grep -E '[Mm]arshal(|s|er|ers|ed|ing)' | wc -l
1694
Make it consistently a single l, per earlier decisions. This means
contributors won't be confused by misleading precedence, and it helps
consistency.
Change the spelling in one error value text in newRawAttributes of
crypto/x509 package to be consistent.
This change was generated with:
perl -i -npe 's,([Mm]arshal)l(|s|er|ers|ed|ing),$1$2,' $(git grep -l -E '[Mm]arshall' | grep -v AUTHORS | grep -v CONTRIBUTORS)
Updates #12431.
Follows https://golang.org/cl/14150.
Change-Id: I85d28a2d7692862ccb02d6a09f5d18538b6049a2
Reviewed-on: https://go-review.googlesource.com/33017
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
pkg-config 0.24 adds support for quoting and escaping whitespace;
distros like CentOS 6 are still shipping pkg-config 0.23. Skip the test
there since there's no way to get whitespace into the pkg-config output.
Fixes#17846.
Change-Id: Ie4ea17e9b709372a20178b539498929754bcd51f
Reviewed-on: https://go-review.googlesource.com/33027
Run-TryBot: Quentin Smith <quentin@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
When a Go program crashes with GOTRACEBACK=crash, the OS creates a
core dump. Include the text-formatted output of some of the cause of
that crash in the core dump.
Output printed by the runtime before crashing is maintained in a
circular buffer to allow access to messages that may be printed
immediately before calling runtime.throw.
The stack traces printed by the runtime as it crashes are not stored.
The information required to recreate them should be included in the
core file.
Updates #16893
There are no tests covering the generation of core dumps; this change
has not added any.
This adds (reentrant) locking to runtime.gwrite, which may have an
undesired performance impact.
Change-Id: Ia2463be3c12429354d290bdec5f3c8d565d1a2c3
Reviewed-on: https://go-review.googlesource.com/32013
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Users can implement the smtp.Auth interface and return zero bytes in
the "toServer []byte" return value from the Auth.Start method. People
apparently do this to implement the SMTP "LOGIN" method.
But we were then sending "AUTH LOGIN \r\n" to the server, which some
servers apparently choke on. So, trim it when the toServer value is
empty.
Fixes#17794
Change-Id: I83662dba9e0f61b1c5000396c096cf7110f78361
Reviewed-on: https://go-review.googlesource.com/33143
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I don't have any way to test or reproduce this problem,
but the current code is clearly wrong for Windows.
Make it better.
As I said on #17165:
But the borrowing of M's and the profiling of M's by the CPU profiler
seem not synchronized enough. This code implements the CPU profiler
on Windows:
func profileloop1(param uintptr) uint32 {
stdcall2(_SetThreadPriority, currentThread, _THREAD_PRIORITY_HIGHEST)
for {
stdcall2(_WaitForSingleObject, profiletimer, _INFINITE)
first := (*m)(atomic.Loadp(unsafe.Pointer(&allm)))
for mp := first; mp != nil; mp = mp.alllink {
thread := atomic.Loaduintptr(&mp.thread)
// Do not profile threads blocked on Notes,
// this includes idle worker threads,
// idle timer thread, idle heap scavenger, etc.
if thread == 0 || mp.profilehz == 0 || mp.blocked {
continue
}
stdcall1(_SuspendThread, thread)
if mp.profilehz != 0 && !mp.blocked {
profilem(mp)
}
stdcall1(_ResumeThread, thread)
}
}
}
func profilem(mp *m) {
var r *context
rbuf := make([]byte, unsafe.Sizeof(*r)+15)
tls := &mp.tls[0]
gp := *((**g)(unsafe.Pointer(tls)))
// align Context to 16 bytes
r = (*context)(unsafe.Pointer((uintptr(unsafe.Pointer(&rbuf[15]))) &^ 15))
r.contextflags = _CONTEXT_CONTROL
stdcall2(_GetThreadContext, mp.thread, uintptr(unsafe.Pointer(r)))
sigprof(r.ip(), r.sp(), 0, gp, mp)
}
func sigprof(pc, sp, lr uintptr, gp *g, mp *m) {
if prof.hz == 0 {
return
}
// Profiling runs concurrently with GC, so it must not allocate.
mp.mallocing++
... lots of code ...
mp.mallocing--
}
A borrowed M may migrate between threads. Between the
atomic.Loaduintptr(&mp.thread) and the SuspendThread, mp may have
moved to a new thread, so that it's in active use. In particular
it might be calling malloc, as in the crash stack trace. If so, the
mp.mallocing++ in sigprof would provoke the crash.
Those lines are trying to guard against allocation during sigprof.
But on Windows, mp is the thread being traced, not the current
thread. Those lines should really be using getg().m.mallocing, which
is the same on Unix but not on Windows. With that change, it's
possible the race on the actual thread is not a problem: the traceback
would get confused and eventually return an error, but that's fine.
The code expects that possibility.
Fixes#17165.
Change-Id: If6619731910d65ca4b1a6e7de761fa2518ef339e
Reviewed-on: https://go-review.googlesource.com/33132
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Note, most math functions are structured to use stubs, so that they can
be accelerated with assembly on any platform.
Sinh, cosh, and tanh were not structued with stubs, so this CL does
that. This set of routines was chosen as likely to produce good speedups
with assembly on any platform.
Technique used was minimax polynomial approximation using tables of
polynomial coefficients, with argument range reduction.
A table of scaling factors was also used for cosh and log10.
before after speedup
BenchmarkCos 22.1 ns/op 6.79 ns/op 3.25x
BenchmarkCosh 125 ns/op 11.7 ns/op 10.68x
BenchmarkLog10 48.4 ns/op 12.5 ns/op 3.87x
BenchmarkSin 22.2 ns/op 6.55 ns/op 3.39x
BenchmarkSinh 125 ns/op 14.2 ns/op 8.80x
BenchmarkTanh 65.0 ns/op 15.1 ns/op 4.30x
Accuracy was tested against a high precision
reference function to determine maximum error.
Approximately 4,000,000 points were tested for each function,
producing the following result.
Note: ulperr is error in "units in the last place"
max
ulperr
sin 1.43 (returns NaN beyond +-2^50)
cos 1.79 (returns NaN beyond +-2^50)
cosh 1.05
sinh 3.02
tanh 3.69
log10 1.75
Also includes a set of tests to test non-vector functions even
when SIMD is enabled
Change-Id: Icb45f14d00864ee19ed973d209c3af21e4df4edc
Reviewed-on: https://go-review.googlesource.com/32352
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <munday@ca.ibm.com>
If the Server's Shutdown (or SetKeepAlivesEnabled) method was called
while a connection was in a Handler, but after the headers had been
written, the connection was not later closed.
Fixes#9478
Updates #17754 (reverts that workaround)
Change-Id: I65324ab8217373fbb38e12e2b8bffd0a91806072
Reviewed-on: https://go-review.googlesource.com/33141
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 31462 made it possible to operate directly on reflect.Values
instead of always forcing a round trip to interface{} and back.
The round trip was losing addressability, which hurt users.
The round trip was also losing "interface-ness", which helped users.
That is, using reflect.ValueOf(v.Interface()) instead of v was doing
an implicit indirect any time v was itself an interface{} value: the result
was the reflect.Value for the underlying concrete value contained in the
interface, not the interface itself.
CL 31462 eliminated some "unnecessary" reflect.Value round trips
in order to preserve addressability, but in doing so it lost this implicit
indirection. This CL adds the indirection back.
It may help to compare the changes in this CL against funcs.go from CL 31462:
https://go-review.googlesource.com/#/c/31462/4/src/text/template/funcs.go
Everywhere CL 31462 changed 'v := reflect.ValueOf(x)' to 'v := x',
this CL changes 'v := x' to 'v := indirectInterface(x)'.
Fixes#17714.
Change-Id: I67cec4eb41fed1d56e1c19f12b0abbd0e59d35a2
Reviewed-on: https://go-review.googlesource.com/33139
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
TestInterruptWithPanic_h2 was added yesterday in
https://golang.org/cl/33099 and https://golang.org/cl/33103
Deflake it. The http2 server sends an error before logging.
Rather than reorder the http2 code to log before writing the RSTStream
frame, just loop for a bit waiting for the condition we're
expecting.
This goes from 2 in 500 flakes for me to unreproducible.
Change-Id: I062866a5977f50c820965aaf83882ddd7bf98f91
Reviewed-on: https://go-review.googlesource.com/33140
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The restrictions were already being applied to the IP addresses
received from the host resolver. Apply the same restrictions to
literal IP addresses not passed to the host resolver.
For example, ResolveTCPAddr("tcp4", "[2001:db8::1]:http") used
to succeed and now does not (that's not an IPv4 address).
Perhaps a bit surprisingly,
ResolveTCPAddr("tcp4", "[::ffff:127.0.0.1]:http") succeeds,
behaving identically to ResolveTCPAddr("tcp4", "127.0.0.1:http"), and
ResolveTCPAddr("tcp6", "[::ffff:127.0.0.1]:http") fails,
behaving identically to ResolveTCPAddr("tcp6", "127.0.0.1:http").
Even so, it seems right to match (by reusing) the existing filtering
as applied to addresses resolved by the host C library.
If anyone can make a strong argument for changing the filtering
of IPv4-inside-IPv6 addresses, the fix can be applied to all
the code paths in a separate CL.
Fixes#14037.
Change-Id: I690dfdcbe93d730e11e00ea387fa7484cd524341
Reviewed-on: https://go-review.googlesource.com/32100
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
All the existing CPU profiler tests already parse the profile.
That should be sufficient indication that profiles can be parsed.
Fixes#17853.
Change-Id: Ie8a190e2ae4eef125c8eb0d4e8b7adac420abbdb
Reviewed-on: https://go-review.googlesource.com/33136
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
rsc's change golang.org/cl/32455 added a mechanism
that allows pprof to depend on gzip without introducing
an import cycle. This obsoletes the need for the gzip0
package, which was created solely to remove the need
for that dependency.
Change-Id: Ifa3b98faac9b251f909b84b4da54742046c4e3ad
Reviewed-on: https://go-review.googlesource.com/33137
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fix spelling of "original" and "occurred" in new gofmt docs. The same
misspelling of "occurred" was also present in crypto/tls, I fixed it there as
well.
Change-Id: I67b4f1c09bd1a2eb1844207d5514f08a9f525ff9
Reviewed-on: https://go-review.googlesource.com/33138
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
cmd/vet/all still doesn't run for mips/mipsle,
because the rest of the toolchain doesn't yet
fully support it.
Change-Id: I1a86b0edddbdcd5f43e752208508d99da7aabbb3
Reviewed-on: https://go-review.googlesource.com/33134
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Some commands generate binary outputs which are not human readable.
In interactive mode, there are no use-cases for such outputs.
Instead, the new code writes it to the temporary file on the $CWD and
shows the file name. So the user can use any program to display the
file outside interactive shell.
Fixes#17465
Change-Id: I5c479db26017607f7a28eafbff2385533e5c584e
Reviewed-on: https://go-review.googlesource.com/31123
Reviewed-by: Russ Cox <rsc@golang.org>
It will just cause confusion later as the go tool will say
"warning: GOPATH set to GOROOT (%s) has no effect".
Better to just leave GOPATH unset and get that warning instead.
Change-Id: I78ff9e87fdf4bb0460f4f6d6ee76e1becaa3e7b0
Reviewed-on: https://go-review.googlesource.com/33105
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
On some systems the external linker defaults to PIE. On some systems
DT_TEXTREL does not work correctly. When both are true we have a bad
situation: any Go program built with the default buildmode (exe) that
uses external linking will fail to run. Fix this by passing -no-pie to
the external linker, if the option is supported.
Fixes#17847.
Change-Id: I9b5ff97825d8b7f494f96d29c4c04f72b53dbf4e
Reviewed-on: https://go-review.googlesource.com/33106
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The cgo tool used to simply ignore C type qualifiers. To avoid problems
when a C function expected a qualifier that was not present, cgo emitted
a cast to void* around all pointer arguments. Unfortunately, that broke
code that contains both a function declaration and a macro, when the
macro required the argument to have the right type. To fix this problem,
don't ignore qualifiers. They are easy enough to handle for the limited
set of cases that matter for cgo, in which we don't care about array or
function types.
Fixes#17537.
Change-Id: Ie2988d21db6ee016a3e99b07f53cfb0f1243a020
Reviewed-on: https://go-review.googlesource.com/33097
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Whenever GOPATH is not defined in the environment, use $HOME/go
as its default value. For Windows systems use %USERPROFILE%/go
and $home/go for plan9.
The choice of these environment variables is based on what Docker
currently does. The os/user package is not used to avoid having
a cgo dependency.
Updates #17262. Documentation changes forthcoming.
Change-Id: I6368fbfbc5afda99d6e64c35c1980076fcf45344
Reviewed-on: https://go-review.googlesource.com/32019
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
CL 32355 switched from using the output file as a
plugin prefix to the full package path. The linker dead code analysis
was not updated.
Updates #17821
Change-Id: I13fc45e0264b425d28524ec54c829e2c3e895b0b
Reviewed-on: https://go-review.googlesource.com/32916
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts the changes from https://golang.org/cl/33018: Instead
of writing the result of gofmt to a tmp file and then rename that
to the original (which doesn't preserve the original file's perm
bits, uid, gid, and possibly other properties because it is hard
to do in a platform-independent way - see #17869), use the original
code that simply overwrites the processed file if gofmt was able to
create a backup first. Upon success, the backup is removed, otherwise
it remains.
Fixes#17873.
For #8984.
Change-Id: Ifcf2bf1f84f730e6060f3517d63b45eb16215ae1
Reviewed-on: https://go-review.googlesource.com/33098
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This test was only enabled by default today so it hasn't been hardened
by build.golang.org. Welcome to the ring, TestClientTimeout.
Change-Id: I1967f6c825699f13f6c659dc14d3c3c22b965272
Reviewed-on: https://go-review.googlesource.com/33101
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Add an explicit way for Handlers to abort their response to the client
and also not spam their error log with stack traces.
panic(nil) also worked in the past (for http1 at least), so continue
to make that work (and test it). But ErrAbortHandler is more explicit.
Updates #17790 (needs http2 updates also)
Change-Id: Ib1456905b27e2ae8cf04c0983dc73e314a4a751e
Reviewed-on: https://go-review.googlesource.com/33099
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
https://docs.oracle.com/cd/E53394_01/html/E54813/chapter6-54839.html#OSLLGchapter6-24:
"For 64–bit SPARC Elf64_Rela structures, the r_info field is further
broken down into an 8–bit type identifier and a 24–bit type dependent
data field. For the existing relocation types, the data field is
zero. New relocation types, however, might make use of the data bits.
#define ELF64_R_TYPE_ID(info) (((Elf64_Xword)(info)<<56)>>56)
"
No test for this because the only test would be an invalid object file.
Change-Id: I5052ca3bfaf0759e920f9a24a16fd97543b24486
Reviewed-on: https://go-review.googlesource.com/33091
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Interestingly, this only became a problem when CL 32850 marked
TestImportMain as parallel. Before that, "x" was overwritten and remove
in a later test, TestGoBuildOutput. The latter test is not marked as
parallel, so now it is run first. It is rather fragile for two tests to
compete over the same filename, but this change is correct regardless.
Change-Id: I1db7929c0bc20a2fd0cc6a02999bef2dca9e0cc0
Reviewed-on: https://go-review.googlesource.com/33092
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Server.TLSNextProto being nil is necessary but not sufficient but
http2 being automatically enabled.
Fixes#16588
Change-Id: I5b18690582f9b12ef05b58235e1eaa52483be285
Reviewed-on: https://go-review.googlesource.com/33090
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change buffers the entire profile and converts in one shot
in the profile writer, and could use more memory than necessary
to output protocol buffer formatted profiles. It should be
possible to convert each chunk in a stream (maybe maintaining
some minimal state to output in the end) which could save on
memory usage.
Fixes#16093
Change-Id: I946c6a2b044ae644c72c8bb2d3bd82c415b1a847
Reviewed-on: https://go-review.googlesource.com/33071
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This check detects the code
resp, err := http.Get("http://foo.com")
defer resp.Body.Close()
if err != nil {
...
}
For every call to a function on the net/http package or any method
on http.Client that returns (*http.Response, error), it checks
whether the next line is a defer statement that calls on the response.
Fixes#17780.
Change-Id: I9d70edcbfa2bad205bf7f45281597d074c795977
Reviewed-on: https://go-review.googlesource.com/32911
Reviewed-by: Rob Pike <r@golang.org>
Add Albert Nigmatzianov (individual CLA)
Add Alex Browne (individual CLA)
Add Alex Carol (individual CLA)
Add Alexander Döring (individual CLA)
Add Allan Simon (individual CLA)
Add Alok Menghrajani (individual CLA)
Add Andreas Auernhammer (individual CLA)
Add Andreas Litt (individual CLA)
Add Andrew Pogrebnoy (individual CLA)
Add Antonio Murdaca (corporate CLA for Red Hat, Inc.)
Add Atin Malaviya (individual CLA)
Add Billy Lynch (corporate CLA for Google Inc.)
Add Blixt (individual CLA)
Add Boris Nagaev (corporate CLA for Google Inc.)
Add Braden Bassingthwaite (corporate CLA for Vendasta)
Add Brian Kennedy (individual CLA)
Add Bryan Alexander (individual CLA)
Add Carl Johnson (individual CLA)
Add Cixtor (individual CLA)
Add Cyrill Schumacher (individual CLA)
Add Daniel Martí (individual CLA)
Add Daria Kolistratova (corporate CLA for Intel Corporation)
Add David Hubbard (corporate CLA for Google Inc.)
Add David Stainton (individual CLA)
Add Deepak Jois (individual CLA)
Add Denis Nagorny (corporate CLA for Intel Corporation)
Add Dhaivat Pandit (individual CLA)
Add Dhananjay Nakrani (corporate CLA for Google Inc.)
Add Dmitri Popov (individual CLA)
Add Erik Staab (corporate CLA for Google Inc.)
Add Ethan Miller (corporate CLA for IBM)
Add Faiyaz Ahmed (individual CLA)
Add Fedor Indutny (individual CLA)
Add Gabriel Russell (individual CLA)
Add Gareth Paul Jones (individual CLA)
Add Geoffroy Lorieux (individual CLA)
Add Gleb Stepanov (individual CLA)
Add Henrik Hodne (individual CLA)
Add Ivan Babrou (individual CLA)
Add Jack Lindamood (corporate CLA for Amazon.com, Inc)
Add James Clarke (individual CLA)
Add Jamie Beverly (individual CLA)
Add Jason Smale (individual CLA)
Add Jean-Nicolas Moal (individual CLA)
Add Jeroen Bobbeldijk (individual CLA)
Add Jim Kingdon (corporate CLA for Bolt)
Add Jirka Daněk (individual CLA)
Add Jon Chen (corporate CLA for Amazon.com, Inc)
Add Joonas Kuorilehto (individual CLA)
Add Josh Chorlton (individual CLA)
Add Joshua Boelter (corporate CLA for Intel Corporation)
Add Justyn Temme (individual CLA)
Add Kale Blankenship (individual CLA)
Add LE Manh Cuong (individual CLA)
Add Luigi Riefolo (individual CLA)
Add Manfred Touron (individual CLA)
Add Martin Bertschler (individual CLA)
Add Martin Hamrle (individual CLA)
Add Matthew Denton (individual CLA)
Add Matthieu Hauglustaine (individual CLA)
Add Michael Darakananda (corporate CLA for Google Inc.)
Add Mike Appleby (individual CLA)
Add Mike Houston (individual CLA)
Add Mike Strosaker (corporate CLA for IBM)
Add Miroslav Genov (individual CLA)
Add Momchil Velikov (individual CLA)
Add Nick Harper (corporate CLA for Google Inc.)
Add Oleg Vakheta (individual CLA)
Add Parker Moore (individual CLA)
Add Prasanna Swaminathan (corporate CLA for MediaMath, Inc)
Add Radu Berinde (individual CLA)
Add Ramesh Dharan (corporate CLA for Google Inc.)
Add Richard Gibson (individual CLA)
Add Samuel Tan (corporate CLA for Google Inc.)
Add Samuele Pedroni (individual CLA)
Add Sarah Adams (corporate CLA for Google Inc.)
Add Sean Rees (individual CLA)
Add Simon Rawet (individual CLA)
Add Sina Siadat (individual CLA)
Add Song Gao (individual CLA)
Add Suyash (individual CLA)
Add Sven Blumenstein (corporate CLA for Google Inc.)
Add Syohei YOSHIDA (individual CLA)
Add Terrel Shumway (individual CLA)
Add Than McIntosh (corporate CLA for Google Inc.)
Add Thomas de Zeeuw (individual CLA)
Add Tim Henderson (individual CLA)
Add Tom Wilkie (corporate CLA for Weaveworks)
Add Trey Lawrence (individual CLA)
Add Tristan Ooohry (individual CLA)
Add Tuo Shan (corporate CLA for Google Inc.)
Add Victor Chudnovsky (corporate CLA for Google Inc.)
Add Vitor De Mario (individual CLA)
Add Vladimir Mihailenco (individual CLA)
Add Vladimir Stefanovic (individual CLA)
Add Walter Poupore (corporate CLA for Google Inc.)
Add Xuyang Kang (individual CLA)
Add Zev Goldstein (individual CLA)
Updates #12042
Change-Id: I28d63babe225683b88f3f1501e529aed636c9ead
Reviewed-on: https://go-review.googlesource.com/33028
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We add runtime/cgo to the list of import paths for various cases that
imply external linking mode, but before this change we did not add for
an explicit request of external linking mode. This fixes the case where
you are using a non-default buildmode that implies a different
compilation option (for example, -buildmode=pie implies -shared) and the
runtime/cgo package for that option is stale.
No test, as I'm not sure how to write one. It would require forcing a
stale runtime/cgo.
Change-Id: Id0409c7274ce67fe15d910baf587d3220cb53d83
Reviewed-on: https://go-review.googlesource.com/33070
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
An unexported field of a struct is not visible outside of the package
that defines it, so the package path is implicitly part of the
definition of any struct with an unexported field.
Change-Id: I17c6aac822bd0c24188ab8ba1cc406d6b5d82771
Reviewed-on: https://go-review.googlesource.com/32820
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It was a little tricky to figure out how to go from the documentation
to figuring out the best way to implement a Pool, so I thought I'd
try to provide a simple example. The implementation is mostly taken
from the fmt package.
I'm not happy with the verbosity of the calls to WriteString() etc,
but I wanted to provide a non-trivial example.
Change-Id: Id33a8b6cbf8eb278f71e1f78e20205b436578606
Reviewed-on: https://go-review.googlesource.com/24371
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Write output to a temp file first and only upon success
rename that file to source file name.
Fixes#8984.
Change-Id: Ie40e49d2a4eb3c9462fe769ccbf055b4366eceb0
Reviewed-on: https://go-review.googlesource.com/33018
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We only support unmarshaling into a string or a []byte, but we
previously would try (and panic while) setting a slice of a different
type. The docs say ",innerxml" is ignored if the type is not string or
[]byte, so do that for other slices as well.
Fixes#15600.
Change-Id: Ia64815945a14c3d04a0a45ccf413e38b58a69416
Reviewed-on: https://go-review.googlesource.com/32919
Run-TryBot: Quentin Smith <quentin@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
A Go binary may only have 1 executable memory region if it has been
linked using internal linking. This change means that the test will
be skipped if this is the case, rather than fail.
Fixes#17852.
Change-Id: I59459a0f90ae8963aeb9908e5cb9fb64d7d0e0f4
Reviewed-on: https://go-review.googlesource.com/32920
Run-TryBot: Michael Munday <munday@ca.ibm.com>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
- define syntax.Error for cleaner error reporting
- abort parsing after first error if no error handler is installed
- make sure to always report the first error, if any
- document behavior of API calls
- while at it: rename ReadXXX -> ParseXXX (clearer)
- adjust cmd/compile noder.go accordingly
Fixes#17774.
Change-Id: I7893eedea454a64acd753e32f7a8bf811ddbb03c
Reviewed-on: https://go-review.googlesource.com/32950
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
visit is just a func, and there's no formatting
verb for it, and it's on an internal-error path.
It has been thus many years, unchanged and unexecuted.
Change-Id: I4c2e2673ee9996218c24143bcc3be3eb4abdff25
Reviewed-on: https://go-review.googlesource.com/32970
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change adds code, originally written by Russ Cox <rsc@golang.org>
and open-sourced by Google, that converts from the "legacy"
binary pprof profile format to a struct representation of the
new protocol buffer pprof profile format.
This code reads the entire binary format for conversion to the
protobuf format. In a future change, we will update the code
to incrementally read and convert segments of the binary format,
so that the entire profile does not need to be stored in memory.
This change also contains contributions by Daria Kolistratova
<daria.kolistratova@intel.com> from the rolled-back change
golang.org/cl/30556 adapting the code to be used by the package
runtime/pprof.
This code also appeared in the change golang.org/cl/32257, which was based
on Daria Kolistratova's change, but was also rolled back.
Updates #16093
Change-Id: I5c768b1134bc15408d80a3ccc7ed867db9a1c63d
Reviewed-on: https://go-review.googlesource.com/32811
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Fix another case of a parallel test relying on a global variable
(DefaultTransport) implicitly.
Use the private Transport already in scope instead. It's closed at the
end, instead of randomly via another test.
Change-Id: I95e51926177ad19a766cabbb306782ded1bbb59b
Reviewed-on: https://go-review.googlesource.com/32913
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A paranoid go at constant time implementation of P256 curve.
This code relies on z13 SIMD instruction set. For zEC12 and below,
the fallback is the existing P256 implementation. To facilitate this
fallback mode, I've refactored the code so that implementations can
be picked at run-time.
Its 'slightly' difficult to grok, but there is ASCII art..
name old time/op new time/op delta
BaseMultP256 419µs ± 3% 27µs ± 1% -93.65% (p=0.000 n=10+8)
ScalarMultP256 1.05ms ±10% 0.09ms ± 1% -90.94% (p=0.000 n=10+8)
Change-Id: Ic1ded898a2ceab055b1c69570c03179c4b85b177
Reviewed-on: https://go-review.googlesource.com/31231
Run-TryBot: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add tmpdir as a parameter to the closure otherwise the subsequent
modifications to tmpdir causes only the last subdirectory to be
removed.
Additionally, add the missing argument for the t.Fatalf call.
Change-Id: I3df53f9051f7ea40cf3f846d47d9cefe445e9b9d
Reviewed-on: https://go-review.googlesource.com/32892
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
// Executable returns the path name for the executable that started
// the current process. There is no guarantee that the path is still
// pointing to the correct executable. If a symlink was used to start
// the process, depending on the operating system, the result might
// be the symlink or the path it pointed to. If a stable result is
// needed, path/filepath.EvalSymlinks might help.
//
// Executable returns an absolute path unless an error occurred.
//
// The main use case is finding resources located relative to an
// executable.
//
// Executable is not supported on nacl or OpenBSD (unless procfs is
// mounted.)
func Executable() (string, error) {
return executable()
}
Fixes#12773.
Change-Id: I469738d905b12f0b633ea4d88954f8859227a88c
Reviewed-on: https://go-review.googlesource.com/16551
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 32871 updated the default cipher suites to use AES-GCM in
preference to ChaCha20-Poly1305 on platforms which have hardware
implementations of AES-GCM. This change makes BenchmarkThroughput
use the default cipher suites instead of the test cipher suites to
ensure that the recommended (fastest) algorithms are used.
Updates #17779.
Change-Id: Ib551223e4a00b5ea197d4d73748e1fdd8a47c32d
Reviewed-on: https://go-review.googlesource.com/32838
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Windows has a limit of 260 characters on normal paths, but it's possible
to use longer paths by using "extended-length paths" that begin with
`\\?\`. This commit attempts to transparently convert an absolute path
to an extended-length path, following the subtly different rules those
paths require. It does not attempt to handle relative paths, which
continue to be passed to the operating system unmodified.
This adds a new test, TestLongPath, to the os package. This test makes
sure that it is possible to write a path at least 400 characters long
and runs on every platform. It also tests symlinks and hardlinks, though
symlinks are not testable with our builder configuration.
HasLink is moved to internal/testenv so it can be used by multiple tests.
https://msdn.microsoft.com/en-us/library/windows/desktop/aa365247(v=vs.85).aspx
has Microsoft's documentation on extended-length paths.
Fixes#3358.
Fixes#10577.
Fixes#17500.
Change-Id: I4ff6bb2ef9c9a4468d383d98379f65cf9c448218
Reviewed-on: https://go-review.googlesource.com/32451
Run-TryBot: Quentin Smith <quentin@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Support for ChaCha20-Poly1305 ciphers was recently added to crypto/tls.
These ciphers are preferable in software, but they cannot beat hardware
support for AES-GCM, if present.
This change moves detection for hardware AES-GCM support into
cipher/internal/cipherhw so that it can be used from crypto/tls. Then,
when AES-GCM hardware is present, the AES-GCM cipher suites are
prioritised by default in crypto/tls. (Some servers, such as Google,
respect the client's preference between AES-GCM and ChaCha20-Poly1305.)
Fixes#17779.
Change-Id: I50de2be486f0b0b8052c4628d3e3205a1d54a646
Reviewed-on: https://go-review.googlesource.com/32871
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Cuts tests from 35 to 25 seconds.
Many of these could be parallel if the test runner were modified to
give each test its own workdir cloned from the tempdir files they
use. But later. This helps for now.
Updates #17751
Change-Id: Icc2ff87cca60a33ec5fd8abb1eb0a9ca3e85bf95
Reviewed-on: https://go-review.googlesource.com/32850
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
On ppc64x, trampolines are used to resolve too-far
branches for internal linking. The external linking,
solution on ppc64x is to split text sections when they
get too large, allowing the external linker to handle
the long branches.
On arm trampolines are generanted for too-far branches
for internal and external linking. When the change
was made recently to enable trampolines for external linking
on arm, that broke the ppc64x fix for too-far branches
with external linking.
The fix adds a check to use trampolines only for internal
linking with ppc64x.
Fixes#17795
Change-Id: Icce968fb96545f10a913e07654514643bce96261
Reviewed-on: https://go-review.googlesource.com/32853
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Was 2.3 seconds. Now 1.4 seconds.
Next win would be not running a child process and refactoring main so
it could be called from tests easily. But that would also require
rewriting the errchk written in Perl. This appears to be the last user
of errchk in the tree.
Updates #17751
Change-Id: Id7c3cec76f438590789b994e756f55b5397be07f
Reviewed-on: https://go-review.googlesource.com/32754
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
A few tests were using the global DefaultTransport implicitly.
Be explicit instead. And then make some parallel while I'm there.
Change-Id: I3c617e75429ecc8f6d23567d1470f5e5d0cb7cfd
Reviewed-on: https://go-review.googlesource.com/32758
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These comments were originally introduced together with the changes
for alias declarations, and then reverted when we backed out alias
support.
Reintroduce them.
Change-Id: I3ef2c4f4672d6af8a900f5d73df273edf28d1a14
Reviewed-on: https://go-review.googlesource.com/32826
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reason: Decision to back out current alias implementation.
Leaving import/export related code in place for now.
For #16339.
TBR=mdempsky
Change-Id: Ib0897cab2c1c3dc8a541f2efb9893271b0b0efe2
Reviewed-on: https://go-review.googlesource.com/32757
Reviewed-by: Robert Griesemer <gri@golang.org>
Reportedly, -mmacosx-version-min=10.6 -D__MAC_OS_X_VERSION_MAX_ALLOWED=1060
is problematic.
It means min 10.6 and max 10.6, thus exactly 10.6. But we only support
10.8+.
It never caused us problems, because we build on Macs, but apparently
if you cross-compile from Linux with some Mac compiler SDK thing, then
things break?
This was added in https://golang.org/cl/5700083 for #3131, and the
intent at the time was to pin to exactly 10.6. So it wasn't a mistake,
but it is definitely outdated.
Given that we now support 10.8 as the min, update it to 1080.
Fixes#17732
Change-Id: I6cc8ab6ac62b8638a5025952b830f23e8822b2a6
Reviewed-on: https://go-review.googlesource.com/32580
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Anonymous fields are type expressions, and Checker.typexpr already
correctly records uses within them. There's no need for a second
call, and the second call caused a bug when we implemented aliases.
Change-Id: I1bf2429cd4948d68b085e75dfb1bdc03ad8caffd
Reviewed-on: https://go-review.googlesource.com/32837
Reviewed-by: Robert Griesemer <gri@golang.org>
Before: 8.9 seconds for go test -short
After: 2.8 seconds
There are still 250 tests without t.Parallel, but I got the important
onces using a script:
$ go test -short -v 2>&1 | go run ~/slowtests.go
Where slowtests.go is https://play.golang.org/p/9mh5Wg1nLN
The remaining 250 (the output lines from slowtests.go) all have a
reported duration of 0ms, except one 50ms test which has to be serial.
Where tests can't be parallel, I left a comment at the top saying why,
so people don't add t.Parallel later and get surprised at failures.
Updates #17751
Change-Id: Icbe32cbe2b996e23c89f1af6339287fa22af5115
Reviewed-on: https://go-review.googlesource.com/32684
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This CL tweaks the new (unreleased) 307/308 support added in
https://golang.org/cl/29852 for #10767.
Change 1: if a 307/308 response doesn't have a Location header in its
response (as observed in the wild in #17773), just do what we used to
do in Go 1.7 and earlier, and don't try to follow that redirect.
Change 2: don't follow a 307/308 if we sent a body on the first
request and the caller's Request.GetBody func is nil so we can't
"rewind" the body to send it again.
Updates #17773 (will be fixed more elsewhere)
Change-Id: I183570f7346917828a4b6f7f1773094122a30406
Reviewed-on: https://go-review.googlesource.com/32595
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
mheap_.heap_live is an atomically accessed uint64. It is currently not 8-byte
aligned on 32-bit platforms, which has been okay because it's only accessed via
Xadd64, which doesn't require alignment on 386 or ARM32. However, Xadd64 on
MIPS32 does require 8-byte alignment.
Add a padding field to force 8-byte alignment of heap_live and prevent an
alignment check crash on MIPS32.
Change-Id: I7eddf7883aec7a0a7e0525af5d58ed4338a401d0
Reviewed-on: https://go-review.googlesource.com/31635
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
From the doc comment:
Context returns the context for the current test or benchmark.
The context is cancelled when the test or benchmark finishes.
A goroutine started during a test or benchmark can wait for the
context's Done channel to become readable as a signal that the
test or benchmark is over, so that the goroutine can exit.
Fixes#16221.
Fixes#17552.
Change-Id: I657df946be2c90048cc74615436c77c7d9d1226c
Reviewed-on: https://go-review.googlesource.com/31724
Reviewed-by: Rob Pike <r@golang.org>
- Added support for If-Match and If-Unmodified-Since.
- Precondition checks now more strictly follow RFC 7232 section 6, which
affects precedence when multiple condition headers are present.
- When serving a 304, Last-Modified header is now removed when no ETag is
present (as suggested by RFC 7232 section 4.1).
- If-None-Match supports multiple ETags.
- ETag comparison now correctly handles weak ETags.
Fixes#17572
Change-Id: I35039dea6811480ccf2889f8ed9c6a39ce34bfff
Reviewed-on: https://go-review.googlesource.com/32014
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Newer versions of gcc notice a type mismatch and complain.
Fix code to match documented signature in MSDN.
Trybots say this still compiles with the older (5.1) version
of gcc.
Fixes#17771.
Change-Id: Ib3fe6f71b40751e1146249e31232da5ac69b9e00
Reviewed-on: https://go-review.googlesource.com/32646
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A bit contrived to come up with an example, but it happened in #15836, somehow.
$ cat /tmp/x.go
package main
/*
#include <stddef.h>
int foo(void);
int foo(void) {
return 2;
}
#define int asdf
*/
import "C"
func main() {
println(C.foo())
}
$ go run /tmp/x.go
# command-line-arguments
cgo-builtin-prolog:9:31: error: unknown type name 'asdf' <<<<<
_GoString_ GoStringN(char *p, int l);
^
/tmp/x.go:12:13: note: expanded from macro 'int'
#define int asdf
^
cgo-builtin-prolog:10:28: error: unknown type name 'asdf' <<<<<
_GoBytes_ GoBytes(void *p, int n);
^
/tmp/x.go:12:13: note: expanded from macro 'int'
#define int asdf
^
2 errors generated.
The two marked lines used to refer incorrectly to /tmp/x.go.
Fixes#15836.
Change-Id: I08ef60a53cfd148112fceb651eaf7b75d94a7a8d
Reviewed-on: https://go-review.googlesource.com/32613
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Consider a switch like
switch x {
case foo:
f()
g()
}
Before, the coverage annotation for the block calling f and g included
in its position span the text for 'case foo:'. This looks nice in the coverage
report, but it breaks the invariant that coverage blocks are disjoint if
you have a more complex expression like:
switch x {
case func() int { return foo }():
f()
g()
}
Then the coverage analysis wants to annotate the func literal body,
which overlaps with the case body, because the case body is considered
to begin at the case token.
Change the annotation for a case body to start just after the colon of
the case clause, avoiding any potential conflict with complex case
expressions. Could have started at the colon instead, but it seemed
less weird to start just after it.
Fixes#16540.
Change-Id: I1fec4bc2a53c7092e649dc0d4be1680a697cb79b
Reviewed-on: https://go-review.googlesource.com/32612
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
The goal of the test is to provoke a custom import path check error,
which will contain the current repo path, to see that it says ssh:// in it.
But the fix to #16471 made the test no longer provoke that error.
Provoke the error by checking out from rsc.io instead of github.com/rsc.
Fixes#17701.
Change-Id: I750ffda2ff59c2be8e111d26160997214a73fd9a
Reviewed-on: https://go-review.googlesource.com/32641
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This matches the removal of .so files and makes the processing
of '-L/path/to -lfoo' and plain '/path/to/foo.a' match.
Fixes#16463.
Change-Id: I1464c5390d7eb6a3a33b4b2c951f87ef392ec94a
Reviewed-on: https://go-review.googlesource.com/32642
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Cover-annotated cgo-rebuilt package for xtest was
not linked into package graph and so not being rebuilt.
Link into package graph.
Fixes#13625.
Change-Id: I685f7276f92bbc85fbc4b389111c83d9fe517637
Reviewed-on: https://go-review.googlesource.com/32614
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The test case was importing golang.org/x/build/cmd/cl,
which is a package main and cannot be imported.
The test case (stored in a separate repo) has been changed
to import golang.org/x/build/gerrit. Update the test accordingly.
Fixes#17702.
Change-Id: I80e150092111b5a04bb00c992b32edb271edb086
Reviewed-on: https://go-review.googlesource.com/32616
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
OpenBSD's scheduler causes preemption to take 20+ms, so 30ms is not
enough time for 3 goroutines to run. This change continues to sleep for
30ms, but if it finds that the 3 goroutines have not run, it sleeps for
an additional 1s before declaring failure.
Updates #17712
Change-Id: I3e886e40d05192b7cb71b4f242af195836ef62a8
Reviewed-on: https://go-review.googlesource.com/32634
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Quentin Smith <quentin@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some of these whitelist entries could be
eliminated, e.g. by the addition of Go
declarations, but this is a start.
Change-Id: I2fb3234cf05ebc6b161aacac2d4c15d810d50527
Reviewed-on: https://go-review.googlesource.com/32671
Reviewed-by: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The original go tool pprof (written in Perl) got this right.
The Go rewrite never has, but should.
Change-Id: Ie1fc571214c61b1b5654a0bc90e15eb889adf059
Reviewed-on: https://go-review.googlesource.com/32617
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The exported symbol for a plugin can be the only reference to a
type in a program. In particular, "var F func()" will have
the type *func(), which is uncommon.
Fixes#17140
Change-Id: Ide2104edbf087565f5377374057ae54e0c00c57e
Reviewed-on: https://go-review.googlesource.com/29692
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Since Dial(":80") was implemented on Plan 9 (CL 32593),
TestProtocolDialError is failing because dialing a port
superior to 65535 is supported on Plan 9.
This change disallows dialing and listening on ports
superior to 65535.
Fixes#17761.
Change-Id: I95e8a163eeacf1ccd8ece7b650f16a0531c59709
Reviewed-on: https://go-review.googlesource.com/32594
Reviewed-by: Russ Cox <rsc@golang.org>
CL 32101 fixed Dial(":80") on Windows and added TestDialLocal,
which was failing on Plan 9, because it wasn't implemented
on Plan 9.
This change implements Dial(":80") by connecting to 127.0.0.1
or ::1 (depending on network), so it works as documented.
Fixes#17760.
Change-Id: If0ff769299e09bebce11fc3708639c1d8c96c280
Reviewed-on: https://go-review.googlesource.com/32593
Reviewed-by: Russ Cox <rsc@golang.org>
TestAssembly takes 20s on my machine,
which is too slow for normal operation.
Marking as -short has its dangers (#17472),
but hopefully we'll soon have a builder for that.
All the SSA tests are hermetic and not time sensitive
and can thus be run in parallel.
Reduces the cmd/compile/internal/gc test time during
all.bash on my laptop from 42s to 7s.
Updates #17751
Change-Id: Idd876421db23b9fa3475e8a9b3355a5dc92a5a29
Reviewed-on: https://go-review.googlesource.com/32585
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
when compiling f(a, b, c), we do something like:
*(SP+0) = eval(a)
*(SP+8) = eval(b)
*(SP+16) = eval(c)
call f
If one of those evaluations is later determined to unconditionally panic
(say eval(b) in this example), then the call is deadcode eliminated. But
any previous argument write (*(SP+0)=... here) is still around. Becuase
we only compute the size of the outarg area for calls which are still
around at the end of optimization, the space needed for *(SP+0)=v is not
accounted for and thus the outarg area may be too small.
The fix is to make sure that we evaluate any potentially panicing
operation before we write any of the args to the stack. It turns out
that fix is pretty easy, as we already have such a mechanism available
for function args. We just need to extend it to possibly panicing args
as well.
The resulting code (if b and c can panic, but a can't) is:
tmpb = eval(b)
*(SP+16) = eval(c)
*(SP+0) = eval(a)
*(SP+8) = tmpb
call f
This change tickled a bug in how we find the arguments for intrinsic
calls, so that latent bug is fixed up as well.
Update #16760.
Change-Id: I0bf5edf370220f82bc036cf2085ecc24f356d166
Reviewed-on: https://go-review.googlesource.com/32551
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The code to do the conversion is smaller than the
call to the runtime.
The 1-result asserts need to call panic if they fail, but that
code is out of line.
The only conversions left in the runtime are those which
might allocate and those which might need to generate an itab.
Given the following types:
type E interface{}
type I interface { foo() }
type I2 iterface { foo(); bar() }
type Big [10]int
func (b Big) foo() { ... }
This CL inlines the following conversions:
was assertE2T
var e E = ...
b := i.(Big)
was assertE2T2
var e E = ...
b, ok := i.(Big)
was assertI2T
var i I = ...
b := i.(Big)
was assertI2T2
var i I = ...
b, ok := i.(Big)
was assertI2E
var i I = ...
e := i.(E)
was assertI2E2
var i I = ...
e, ok := i.(E)
These are the remaining runtime calls:
convT2E:
var b Big = ...
var e E = b
convT2I:
var b Big = ...
var i I = b
convI2I:
var i2 I2 = ...
var i I = i2
assertE2I:
var e E = ...
i := e.(I)
assertE2I2:
var e E = ...
i, ok := e.(I)
assertI2I:
var i I = ...
i2 := i.(I2)
assertI2I2:
var i I = ...
i2, ok := i.(I2)
Fixes#17405Fixes#8422
Change-Id: Ida2367bf8ce3cd2c6bb599a1814f1d275afabe21
Reviewed-on: https://go-review.googlesource.com/32313
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
We generate an OpKeepAlive for the idata portion of the interface
for a runtime.KeepAlive call. But given such an op, we need to keep
the entire containing variable alive, not just the range that was
passed to the OpKeepAlive operation.
Fixes#17710
Change-Id: I90de66ec8065e22fb09bcf9722999ddda289ae6e
Reviewed-on: https://go-review.googlesource.com/32477
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
The proper fix for the Writer is too involved to be done in time
for Go 1.8. Instead, we do a localized fix that simply disables the
prefix encoding logic. While this will prevent some legitimate uses
of prefix, it will ensure that we don't keep outputting invalid
GNU format files that have the prefix field populated.
For headers with long filenames that could have used the prefix field,
they will be promoted to use the PAX format, which ensures that we
will still be able to encode all headers that we were able to do before.
Updates #12594Fixes#17630Fixes#9683
Change-Id: Ia97b524ac69865390e2ae8bb0dfb664d40a05add
Reviewed-on: https://go-review.googlesource.com/32234
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of writing out the original object for each alias, ensure we
export the original object before any aliases. This allows the aliases
to simply refer back to the original object by qualified name.
Fixes#17636.
Change-Id: If80fa8c66b8fee8344a00b55d25a8aef22abd859
Reviewed-on: https://go-review.googlesource.com/32575
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Windows sockets allow bind to 0.0.0.0:80 but not connect to it.
To make Listen(":80") / Dial(":80") work as documented on Windows,
connect to 127.0.0.1 or ::1 (depending on network) in place of 0.0.0.0.
Fixes#6290.
Change-Id: Ia27537067276871648546678fbe0f1b8478329fe
Reviewed-on: https://go-review.googlesource.com/32101
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Currently, we don't have package testing to import package regexp directly,
because then regexp can't have internal tests (or at least they become more
difficult to write), for fear of an import cycle. The solution we've been using
is for the generated test main package (pseudo-import path "testmain", package main)
to import regexp and pass in a matchString function for use by testing when
implementing the -run flags. This lets testing use regexp but without depending
on regexp and creating unnecessary cycles.
We want to add a few dependencies to runtime/pprof, notably regexp
but also compress/gzip, without causing those packages to have to work
hard to write internal tests.
Restructure the (dare I say it) dependency injection of regexp.MatchString
to be more general, and use it for the runtime/pprof functionality in addition
to the regexp functionality. The new package testing/internal/testdeps is
the root for the testing dependencies handled this way.
Code using testing.MainStart will have to change from passing in a matchString
implementation to passing in testdeps.TestDeps{}. Users of 'go test' don't do this,
but other build systems that have recreated 'go test' (for example, Blaze/Bazel)
may need to be updated. The new testdeps setup should make future updates
unnecessary, but even so we keep the comment about MainStart not being
subject to Go 1 compatibility.
Change-Id: Iec821d2afde10c79f95f3b23de5e71b219f47b92
Reviewed-on: https://go-review.googlesource.com/32455
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 21870 moved the entire cmd/pprof/internal directory to cmd/internal/pprof
for use by cmd/trace, but really cmd/trace only needed cmd/pprof/internal/profile,
which became cmd/internal/pprof/profile, and then internal/pprof/profile.
Move the rest back under cmd/pprof so that it is clear that no other code
is reaching into the guts of cmd/pprof. Just like functions should not be
exported unless necessary, internals should not be made visible to more
code than necessary.
Raúl Silvera noted after the commit of CL 21870 that only the profile package
should have moved, but there was no followup fix (until now).
Change-Id: I603f4dcb0616df1e5d5eb7372e6fccda57e05079
Reviewed-on: https://go-review.googlesource.com/32453
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This allows both the runtime and the cmd/pprof code to use the package,
just like we do for internal/trace.
Change-Id: I7606977284e1def36c9647354c58e7c1e93dba6b
Reviewed-on: https://go-review.googlesource.com/32452
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Updates the s390x-specific files in these packages with the changes
to the amd64-specific files made during the review of CL 31690. I'd
like to keep these files in sync unless there is a reason to
diverge.
Change-Id: Id83e5ce11a45f877bdcc991d02b14416d1a2d8d2
Reviewed-on: https://go-review.googlesource.com/32574
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
SWIG generates cgo input files in the work directory. When those files
are passed directly to cgo, cgo generates long file names that include
the object directory (with slashes replaced by underscores). Instead,
use cgo's new -srcdir option to give it short file names.
When using both SWIG and cgo, copy the cgo files into the object
directory first.
Use a shorter object file name when compiling the C file generated by
SWIG.
Fixes#17070.
Change-Id: Ic558603f1731636d9999f3130ad0224b24bd7dcb
Reviewed-on: https://go-review.googlesource.com/32485
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
In a function argument, we handle a typedef for a pointer specially,
using the pointer type rather than the typedef, to permit the Go calls
to match the laxer type conversions permitted in C. We record the
typedef so that we use that type in the C code, in case it has a special
attribute. However, using the typedef is wrong when using a pointer to a
basic type, because the C code may sometimes use the typedef and
sometimes not, and using the typedef in all cases will cause incorrect
type errors on the Go side. Fortunately we only really need to use the
typedef when pointing to a struct/union/class, and in such a case
confusion is unlikely.
Fixes#17723.
Change-Id: Id2eaeb156faeaf2e8eb9cf0b8f95b44caf8cfbd2
Reviewed-on: https://go-review.googlesource.com/32536
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Before aliases, and because we chose a simple export format for them,
a package may now export the same object more than once if there are
multiple exported aliases referring to that object. The go/importer
made the assumption this couldn't happen. Adjust it.
Fixes#17726.
Change-Id: Ibb9fc669a8748200b45ad78934d7453e5a5aad82
Reviewed-on: https://go-review.googlesource.com/32538
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
Since SWIG uses cgo, when using SWIG with gccgo, the go tool will add a
_cgo_flags file to the package archive, just as it does with cgo. We
need to remove that file from the archive passed to the linker, just as
we do with cgo.
Change-Id: I5ef4fea92eec419f870fbf6f678691d15901ee6c
Reviewed-on: https://go-review.googlesource.com/32535
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
A plugin with no exported symbols is still potentially very useful.
Its init functions are called on load, and it so it can have visible
side effects.
Fixes#17681
Change-Id: Icdca31f48e5ab13c99020a2ef724f3de47dcd74b
Reviewed-on: https://go-review.googlesource.com/32437
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When we lookup a qualified identifier, we need to unpack
an alias. Do this in all places, not just one. Duh!
Fixes#17716.
For #17592.
Change-Id: I58d57b17cc635d0408b370f109c719c16757fd8e
Reviewed-on: https://go-review.googlesource.com/32534
Reviewed-by: Alan Donovan <adonovan@google.com>
The runtime.typeEquals function is used during typelinksinit to
determine the canonical set of *_type values to use throughout the
runtime. As such, it is run against non-canonical *_type values, that
is, types from modules that are duplicates of a type from another
module that was loaded earlier in the program life.
These non-canonical *_type values sometimes contain pointers. These
pointers are pointing to position-independent data, and so they are set
by ld.so using dynamic relocations when the module is loaded. As such,
the pointer can point to the equivalent memory from a previous module.
This means if typesEqual follows a pointer inside a *_type, it can end
up at a piece of memory from another module. If it reads a typeOff or
nameOff from that memory and attempts to resolve it against the
non-canonical *_type from the later module, it will end up with a
reference to junk memory.
Instead, resolve against the pointer the offset was read from, so the
data is valid.
Fixes#17709.
Should no longer matter after #17724 is resolved in a later Go.
Change-Id: Ie88b151a3407d82ac030a97b5b6a19fc781901cb
Reviewed-on: https://go-review.googlesource.com/32513
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When the err from ReadFile is non-nil, we call t.Fatal(err).
Switch t.Fatal to t.Error + return.
ensure that close(results) happens on that code path as well.
Updates #17697.
Change-Id: Ifaacf27a76c175446d642086ff32f4386428080d
Reviewed-on: https://go-review.googlesource.com/32486
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This makes no practical difference, as SIGSTOP can not be caught, but
may as well be consistent.
Change-Id: I3efbbf092388bb3f6dccc94cf703c5d94d35f6a1
Reviewed-on: https://go-review.googlesource.com/32533
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This makes it possible to avoid tests where coverage affects the test
results by skipping them (or otherwise adjusting them) when coverage
is enabled.
Update #17699
Change-Id: Ifcc36cfcd88ebd677890e82ba80ee3d696ed3d7c
Reviewed-on: https://go-review.googlesource.com/32483
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
sigfwd calls an arbitrary C signal handler function. The System V ABI
for x86_64 (and the most recent revision of the ABI for i386) requires
the stack to be 16-byte aligned.
Fixes: #17641
Change-Id: I77f53d4a8c29c1b0fe8cfbcc8d5381c4e6f75a6b
Reviewed-on: https://go-review.googlesource.com/32107
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Go's http1 implementation originally had a mechanism to send HTTP
trailers based on pre-declaring the trailer keys whose values you'd
later let after the header was written.
http2 copied the same mechanism, but it was found to be unsufficient
for gRPC's wire protocol. A second trailer mechanism was added later
(but only to http2) for handlers that want to send a trailer without
knowing in advance they'd need to.
Copy the same mechanism back to http1 and document it.
Fixes#15754
Change-Id: I8c40d55e28b0e5b7087d3d1a904a392c56ee1f9b
Reviewed-on: https://go-review.googlesource.com/32479
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Skip TestObjdumpPowerManual if the host system is not ppc64 or ppc64le.
This test depends on using the host objdump and comparing output, which
does not work as expected if the test is run on another host.
Orignates from golang.org/x/arch/ppc64/ppc64asm commit 8e2d4898.
Fixes#17698
Change-Id: I956b0fb78c5ec33641db752d46a755008403d269
Reviewed-on: https://go-review.googlesource.com/32531
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The introduction of -buildmode=plugin means modules can be added to a
Go program while it is running. This means there exists some time
while the program is running with the module is on the moduledata
linked list, but it has not been initialized to the satisfaction of
other parts of the runtime. Notably, the GC.
This CL adds a new way of access modules, an activeModules function.
It returns a slice of modules that is built in the background and
atomically swapped in. The parts of the runtime that need to wait on
module initialization can use this slice instead of the linked list.
Fixes#17455
Change-Id: I04790fd07e40c7295beb47cea202eb439206d33d
Reviewed-on: https://go-review.googlesource.com/32357
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There is no benefit to folding ADDconsts unless the resultant immediate
will fit into a 20-bit signed integer, so limit these rules accordingly.
Also the signed load operations were missing, so I've added them, and
I've also removed some MOVDaddr rules that were dead code (MOVDaddrs
are rematerializable on s390x which means they can't take inputs other
than SP or SB).
Change-Id: Iebeba78da37d3d71d32d4b7f49fe4ea9095d40ec
Reviewed-on: https://go-review.googlesource.com/30616
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
- Adds overflow checks
- Adds parsing of negative integers
- Adds boolean return value to signal parsing errors
- Adds atoi32 for parsing of integers that fit in an int32
- Adds tests
Handling of errors to provide error messages
at the call sites is left to future CLs.
Updates #17718
Change-Id: I3cacd0ab1230b9efc5404c68edae7304d39bcbc0
Reviewed-on: https://go-review.googlesource.com/32390
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This implements a check that can be done at runtime for the ISA level and
hardware capability. It follows the same implementation as in s390x.
These checks will be important as we enable new instructions and write go
asm implementations using those.
Updates #15403Fixes#16643
Change-Id: Idfee374a3ffd7cf13a7d8cf0a6c83d247d3bee16
Reviewed-on: https://go-review.googlesource.com/32330
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In a previous change, cmd/go was taught to show a "no tests ran" warning
if test did nothing. But it missed a case - if no tests nor examples ran
but any benchmarks were meant to be run, it would still produce the
warning. This meant that running only benchmarks, which is common, would
be confusing:
$ go test -run='^$' -bench=.
testing: warning: no tests to run
BenchmarkFoo-4 300000 5056 ns/op
[...]
I believe this was because of a copy-paste error in the tests. This was
being tested, but on the wrong file which does contain a test that was
being run. Fix the path and fix the now failing test by never showing
the warning if -bench was given a non-empty string.
The rationale is that if -bench was given but there was no output, it's
obvious that nothing happened as benchmarks always produce output even
without -v. So showing a warning in those cases is redundant.
To make future typos less likely, make sure that no tests are being run
in the cases where we only want to run benchmarks.
Fixes#17603.
Change-Id: I4c626caf39f72260c6a9761c06446663f465f947
Reviewed-on: https://go-review.googlesource.com/32157
Reviewed-by: Marcel van Lohuizen <mpvl@golang.org>
Run-TryBot: Marcel van Lohuizen <mpvl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds ModifyResponse, an optional func to ReverseProxy
that modifies a response in the backend, right before
the headers of the response are written to the internal
response writer.
If ModifyResponse returns an error, the proxy returns
a StatusBadGateway error.
Fixes#14237.
Change-Id: I8e03139e34dea0084512ccbd8cc49e941bf9fb5d
Reviewed-on: https://go-review.googlesource.com/32356
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL expands upon a change made in (http://golang.org/cl/21811)
to ensure that a nil RawMessage gets serialized as "null" instead of
being a nil slice.
The added check only triggers when the RawMessage is nil. We do not
handle the case when the RawMessage is non-nil, but empty.
Fixes#17704
Updates #14493
Change-Id: I0fbebcdd81f7466c5b78c94953afc897f162ceb4
Reviewed-on: https://go-review.googlesource.com/32472
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently we have write barriers for direct channel sends, where the
receiver is blocked and the sender is writing directly to the
receiver's stack; but not for direct channel receives, where the
sender is blocked and the receiver is reading directly from the
sender's stack.
This was okay with the old write barrier because either 1) the
receiver would write the received pointer into the heap (causing it to
be shaded), 2) the pointer would still be on the receiver's stack at
mark termination and we would rescan it, or 3) the receiver dropped
the pointer so it wasn't necessarily reachable anyway.
This is not okay with the write barrier because it lets a grey stack
send a white pointer to a black stack and then remove it from its own
stack. If the grey stack was the sole grey-protector of this pointer,
this hides the object from the garbage collector.
Fix this by making direct receives perform a stack-to-stack write
barrier just like direct sends do.
Fixes#17694.
Change-Id: I1a4cb904e4138d2ac22f96a3e986635534a5ae41
Reviewed-on: https://go-review.googlesource.com/32450
Reviewed-by: Rick Hudson <rlh@golang.org>
typecheckcomplit nils out node's type, upon finding new errors.
This hides new errors in children's node as well as the type info
of current node. This change fixes that.
Fixes#17645.
Change-Id: Ib473291f31c7e8fa0307cb1d494e0c112ddd3583
Reviewed-on: https://go-review.googlesource.com/32324
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, assists can only perform heap marking jobs. However, at the
beginning of GC, there are only root jobs and no heap marking jobs. As
a result, there's often a period at the beginning of a GC cycle where
no goroutine has accumulated assist credit, but at the same time it
can't get any credit because there are no heap marking jobs for it to
do yet. As a result, many goroutines often block on the assist queue
at the very beginning of the GC cycle.
This commit fixes this by allowing assists to perform root marking
jobs. The tricky part of this (and the reason we haven't done this
before) is that stack scanning jobs can lead to deadlocks if the
goroutines performing the stack scanning are themselves
non-preemptible, since two non-preemptible goroutines may try to scan
each other. To address this, we use the same insight d6625ca used to
simplify the mark worker stack scanning: as long as we're careful with
the stacks and only drain jobs while on the system stack, we can put
the goroutine into a preemptible state while we drain jobs. This means
an assist's user stack can be scanned while it continues to do work.
This reduces the rate of assist blocking in the x/benchmarks HTTP
benchmark by a factor of 3 and all remaining blocking happens towards
the *end* of the GC cycle, when there may genuinely not be enough work
to go around.
Ideally, assists would get credit for working on root jobs. Currently
they do not; however, this change prioritizes heap work over root jobs
in assists, so they're likely to mostly perform heap work. In contrast
with mark workers, for assists, the root jobs act only as a backstop
to create heap work when there isn't enough heap work.
Fixes#15361.
Change-Id: If6e169863e4ad75710b0c8dc00f6125b41e9a595
Reviewed-on: https://go-review.googlesource.com/32432
Reviewed-by: Rick Hudson <rlh@golang.org>
This lifts the part of gcAssistAlloc that runs on the system stack to
its own function in preparation for letting assists perform root jobs
(notably stack scanning). This makes it easy to see that there are no
references to the user stack once we've entered gcAssistAlloc1, which
means it's safe to shrink the stack while in gcAssistAlloc1.
This does not yet make assists perform root jobs, so it's not actually
possible for the stack to shrink yet. That will happen in the next
commit.
The code in gcAssistAlloc1 is identical to the code that's currently
passed in a closure to systemstack with one exception. Currently, we
set the "completed" variable in the enclosing scope to indicate that
the assist completed the mark phase. This is exactly the sort of
cross-stack reference lifting this function is meant to prevent. We
replace this variable with setting gp.param to nil or non-nil to
indicate the completion status.
Updates #15361.
Change-Id: Iba7cfb758c781070a441aea86c0117b399a24dbd
Reviewed-on: https://go-review.googlesource.com/32431
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
Previously, on encountering Func.Nname.Type == nil, typecheckfunc()
returned without initializing Decldepth for that func. This causes
typecheckclosure() to fatal. This change ensures that we initialize
Decldepth in all cases.
Fixes#17588.
Change-Id: I2e3c81ad52e8383395025388989e8dbf03438b68
Reviewed-on: https://go-review.googlesource.com/32415
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We used to have to keep on-stack copies of these types.
Now they can be registerized.
[0]T is kind of trivial but might as well handle it.
This change enables another change I'm working on to improve how x.(T)
expressions are handled (#17405). This CL helps because now all
types that are direct interface types are registerizeable (e.g. [1]*byte).
No higher-degree arrays for now because non-constant indexes are hard.
Update #17405
Change-Id: I2399940965d17b3969ae66f6fe447a8cefdd6edd
Reviewed-on: https://go-review.googlesource.com/32416
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is an extension of
https://go-review.googlesource.com/c/31662/
to mark all the temporaries, not just the ssa-generated ones.
Before-and-after ls -l `go tool -n compile` shows a 3%
reduction in size (or rather, a prior 3% inflation for
failing to filter temps out properly.)
Replaced name-dependent "is it a temp?" tests with calls to
*Node.IsAutoTmp(), which depends on AutoTemp. Also replace
calls to istemp(n) with n.IsAutoTmp(), to reduce duplication
and clean up function name space. Generated temporaries
now come with a "." prefix to avoid (apparently harmless)
clashes with legal Go variable names.
Fixes#17644.
Fixes#17240.
Change-Id: If1417f29c79a7275d7303ddf859b51472890fd43
Reviewed-on: https://go-review.googlesource.com/32255
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
-M, -P, and -R were for debugging backend passes that no longer
exists.
-g is used for debugging instructions generated with Gins, but the SSA
backend mostly generates instructions directly. The handful of
instructions still generated with Gins are pretty useless for
debugging.
-x was used to debug the old lexer, but now it only causes us to print
file names as they're parsed, and only if we manually hack the
compiler to enable tracing.
Change-Id: Ia58d4bc9c1312693466171a3fcefc1221e9a2381
Reviewed-on: https://go-review.googlesource.com/32428
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Adds an assembly implementation of sha256.block for ppc64le to improve its
performance. This implementation is largely based on the original amd64
implementation, which unrolls the 64 iterations of the inner loop.
Fixes#17652
benchmark old ns/op new ns/op delta
BenchmarkHash8Bytes 1263 767 -39.27%
BenchmarkHash1K 14048 7766 -44.72%
BenchmarkHash8K 102245 55626 -45.60%
benchmark old MB/s new MB/s speedup
BenchmarkHash8Bytes 6.33 10.43 1.65x
BenchmarkHash1K 72.89 131.85 1.81x
BenchmarkHash8K 80.12 147.27 1.84x
Change-Id: Ib4adf429423b20495580400be10bd7e171bcc70b
Reviewed-on: https://go-review.googlesource.com/32318
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds an assembly implementation of sha512.block for ppc64le to improve its
performance. This implementation is largely based on the original amd64
implementation, unrolling the 80 iterations of the inner loop.
Fixes#17660
benchmark old ns/op new ns/op delta
BenchmarkHash8Bytes 1715 1133 -33.94%
BenchmarkHash1K 10098 5513 -45.41%
BenchmarkHash8K 68004 35278 -48.12%
benchmark old MB/s new MB/s speedup
BenchmarkHash8Bytes 4.66 7.06 1.52x
BenchmarkHash1K 101.40 185.72 1.83x
BenchmarkHash8K 120.46 232.21 1.93x
Change-Id: Ifd55a49a24cb159b3a09a8e928c3f37727aca103
Reviewed-on: https://go-review.googlesource.com/32320
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts commit b33030a727.
Reason for revert: We're going to try to get the code in this change
submitted in smaller, more carefully reviewed changes.
Change-Id: I4175f4b297f0e69fb78b11f9dc0bd82f27865be7
Reviewed-on: https://go-review.googlesource.com/32441
Reviewed-by: Russ Cox <rsc@golang.org>
The map[typeOff]*_type object is created at run time and stored in
the moduledata. The moduledata object is marked by the linker as
SNOPTRDATA, so the reference is ignored by the GC. Running
misc/cgo/testplugin/test.bash with GOGC=1 will eventually collect
the typemap and crash.
This bug probably comes up in -linkshared binaries in Go 1.7.
I don't know why we haven't seen a report about this yet.
Fixes#17680
Change-Id: I0e9b5c006010e8edd51d9471651620ba665248d3
Reviewed-on: https://go-review.googlesource.com/32430
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Plumb the import path of a plugin package through to the linker, and
use it as the prefix on the exported symbol names.
Before this we used the basename of the plugin file as the prefix,
which could conflict and result in multiple loaded plugins sharing
symbols that are distinct.
Fixes#17155Fixes#17579
Change-Id: I7ce966ca82d04e8507c0bcb8ea4ad946809b1ef5
Reviewed-on: https://go-review.googlesource.com/32355
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is convenient for direct use of `go tool cgo`. We can also use it
from the go tool to reduce the length of the file names that cgo
generates.
Update #17070.
Change-Id: I8466a0a2cc68a732d17d07319e303497715bac8c
Reviewed-on: https://go-review.googlesource.com/32354
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This field is a zero length array and has little use. Since Go 1.5, trailing
zero-length arrays take up space. Both syscall.UnixRights() and
syscall.ParseSocketControlMessage() depend on being able to do an unsafe cast
of socket control message data to Cmsghdr this is only safe if the socket
control message data is greater than or equal to the size of Cmsghdr. Since
control message data that is equal in size to Cmsghdr without X__cmsg_data is
a valid socket control message, we must remove X__cmsg_data or not perform the
unsafe cast.
Removing X__cmsg_data will prevent Go code that uses X__cmsg_data from
compiling, but removing the unsafe cast will cause Go code that uses
X__cmsg_data to fail or exhibit undefined behavior at runtime. It was
therefore decided that removing X__cmsg_data was the better option.
Fixes#17649
Change-Id: I39f323f978eca09d62da5785c5c5c9c7cbdf8c31
Reviewed-on: https://go-review.googlesource.com/32319
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Prior to this change, it was implied that transaction properties
would be carried in the context value. However, no such properties
were defined, not even common ones. Define two common properties:
isolation level and read-only. Drivers may choose to support
additional transaction properties. It is not expected any
further transaction properties will be added in the future.
Change-Id: I2f680115a14a1333c65ba6f943d9a1149d412918
Reviewed-on: https://go-review.googlesource.com/31258
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No point in computing this info on startup.
Compute it at build time.
This lets us spend more time computing & checking the size classes.
Improve the div magic for rounding to the start of an object.
We can now use 32-bit multiplies & shifts, which should help
32-bit platforms.
The static data is <1KB.
The actual size classes are not changed by this CL.
Change-Id: I6450cec7d1b2b4ad31fd3f945f504ed2ec6570e7
Reviewed-on: https://go-review.googlesource.com/32219
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This fixes systems for which ccache is the default compiler.
Also remove a couple of temporary files created by TestImportMain.
Fixes#17668.
Change-Id: I1edefdcec5f417be0533c146253c35ff4928c1c0
Reviewed-on: https://go-review.googlesource.com/32328
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Provides redirection support for 307, 308 server statuses.
Provides redirection support for DELETE method.
Updates old tests that assumed all redirects were treated
the way 301, 302 and 303 are processed.
Fixes#9348Fixes#10767Fixes#13994
Change-Id: Iffa8dbe0ff28a1afa8da59869290ec805b1dd2c4
Reviewed-on: https://go-review.googlesource.com/29852
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The GZIP format records the ModTime as an uint32 counting seconds since
the Unix epoch. The zero value is explicitly defined in section 2.3.1
as meaning no timestamp is available.
Currently, the Writer always encodes the ModTime even if it is the zero
time.Time value, which causes the Writer to try and encode the value
-62135596800 into the uint32 MTIME field. This causes an overflow and
results in our GZIP files having MTIME fields indicating a date in 2042-07-13.
We alter the Writer to only encode ModTime if the value does not underflow
the MTIME field (i.e., it is newer than the Unix epoch). We do not attempt
to fix what happens when the timestamp overflows in the year 2106.
We alter the Reader to only decode ModTime if the value is non-zero.
There is no risk of overflowing time.Time when decoding.
Fixes#17663
Change-Id: Ie1b65770c6342cd7b14aeebe10e5a49e6c9eb730
Reviewed-on: https://go-review.googlesource.com/32325
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
After the final slash, dots are %-escaped when constructing a symbol name,
so that in the actual symbol table, the import path githost.com/my.git
becomes githost.com/my%2egit. In this case, -X githost.com/my.git.Value=foo
needs to set githost.com/my%2egit.Value. This is a detail of the object format
and not something users should know or depend on, so apply the escaping
as needed.
People who have run across this already and figured out and started using
the escaped forms with -X will find those forms not working anymore.
That is, -X githost.com/my%2egit.Value=foo is the Go 1.7 workaround but
will stop working in Go 1.8 once this proper fix is in place.
People who need to keep scripts working with older and newer versions of Go
can safely pass both forms, and one will be ignored:
-X githost.com/my%2egit.Value=foo -X githost.com/my.git.Value=foo
Fixes#16710.
Change-Id: I0e994ccdd412a4eb8349fefce9aeb3bfc9a83cd8
Reviewed-on: https://go-review.googlesource.com/31970
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The filepath.Abs function in windows did not call Clean as the
documentation claimed. This change not only fixes that behavior but
also adjusts TestAbs to verify Abs calls Clean as documented.
Fixes#17210
Change-Id: I20c5f5026042fd7bd9d929ff5b17c8b2653f8afe
Reviewed-on: https://go-review.googlesource.com/32292
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Improves the error message by moving the field name before the body
of a struct, in the error message for unknown fields for structs.
* Exhibit:
Given program:
package main
import "time"
func main() {
_ = struct {
about string
before map[string]uint
update map[string]int
updateTime time.Time
expect map[string]int
}{
about: "this one",
updates: map[string]int{"gopher": 10},
}
}
* Before:
./issue17631.go:20: unknown struct { about string; before map[string]uint;
update map[string]int; updateTime time.Time; expect map[string]int } field
'updates' in struct literal
* After:
./issue17631.go:20: unknown field 'updates' in struct literal of type { about string;
before map[string]uint; update map[string]int; updateTime time.Time;
expect map[string]int }
Fixes#17631
Change-Id: I76842616411b931b5ad7a76bd42860dfde7739f4
Reviewed-on: https://go-review.googlesource.com/32240
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
I did 'export GORACE=atexit_sleep_ms=0' in a console
and then was puzzled as to why race tests fail.
Existing GORACE env var may (or may not) override
the one that we setup.
Filter out GORACE as we do for other important env vars.
Change-Id: I29be86b0cbb9b5dc7f9efb15729ade86fc79b0e0
Reviewed-on: https://go-review.googlesource.com/32163
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The docs used to imply that using == would compare Locations, but of
course it just compares Location pointers, which will have unpredictable
results depending on how the pointers are loaded.
Change-Id: I783c1309e476a9616a1c1c290eac713aba3b0b57
Reviewed-on: https://go-review.googlesource.com/32332
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On solaris/amd64 sometimes the reported cycle count is negative. Replace
with 0.
Change-Id: I364eea5ca072281245c7ab3afb0bf69adc3a8eae
Reviewed-on: https://go-review.googlesource.com/32258
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Use "have" and "want" and multiple lines like other similar error
messages. Also, fix handling of ... and multi-value function calls.
Fixes#17650.
Change-Id: I4850e79c080eac8df3b92a4accf9e470dff63c9a
Reviewed-on: https://go-review.googlesource.com/32261
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On amd64p32, rt0_go attempts to reserve 128 bytes of scratch space on
the stack, but due to a register mixup this ends up being a no-op. Fix
this so we actually reserve the stack space.
Change-Id: I04dbfbeb44f3109528c8ec74e1136bc00d7e1faa
Reviewed-on: https://go-review.googlesource.com/32331
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
With the hybrid barrier in place, we can now disable stack rescanning
by default. This commit adds a "gcrescanstacks" GODEBUG variable that
is off by default but can be set to re-enable STW stack rescanning.
The plan is to leave this off but available in Go 1.8 for debugging
and as a fallback.
With this change, worst-case mark termination time at GOMAXPROCS=12
*not* including time spent stopping the world (which is still
unbounded) is reliably under 100 µs, with a 95%ile around 50 µs in
every benchmark I tried (the go1 benchmarks, the x/benchmarks garbage
benchmark, and the gcbench activegs and rpc benchmarks). Including
time spent stopping the world usually adds about 20 µs to total STW
time at GOMAXPROCS=12, but I've seen it add around 150 µs in these
benchmarks when a goroutine takes time to reach a safe point (see
issue #10958) or when stopping the world races with goroutine
switches. At GOMAXPROCS=1, where this isn't an issue, worst case STW
is typically 30 µs.
The go-gcbench activegs benchmark is designed to stress large numbers
of dirty stacks. This commit reduces 95%ile STW time for 500k dirty
stacks by nearly three orders of magnitude, from 150ms to 195µs.
This has little effect on the throughput of the go1 benchmarks or the
x/benchmarks benchmarks.
name old time/op new time/op delta
XGarbage-12 2.31ms ± 0% 2.32ms ± 1% +0.28% (p=0.001 n=17+16)
XJSON-12 12.4ms ± 0% 12.4ms ± 0% +0.41% (p=0.000 n=18+18)
XHTTP-12 11.8µs ± 0% 11.8µs ± 1% ~ (p=0.492 n=20+18)
It reduces the tail latency of the x/benchmarks HTTP benchmark:
name old p50-time new p50-time delta
XHTTP-12 489µs ± 0% 491µs ± 1% +0.54% (p=0.000 n=20+18)
name old p95-time new p95-time delta
XHTTP-12 957µs ± 1% 960µs ± 1% +0.28% (p=0.002 n=20+17)
name old p99-time new p99-time delta
XHTTP-12 1.76ms ± 1% 1.64ms ± 1% -7.20% (p=0.000 n=20+18)
Comparing to the beginning of the hybrid barrier implementation
("runtime: parallelize STW mcache flushing") shows that the hybrid
barrier trades a small performance impact for much better STW latency,
as expected. The magnitude of the performance impact is generally
small:
name old time/op new time/op delta
BinaryTree17-12 2.37s ± 1% 2.42s ± 1% +2.04% (p=0.000 n=19+18)
Fannkuch11-12 2.84s ± 0% 2.72s ± 0% -4.00% (p=0.000 n=19+19)
FmtFprintfEmpty-12 44.2ns ± 1% 45.2ns ± 1% +2.20% (p=0.000 n=17+19)
FmtFprintfString-12 130ns ± 1% 134ns ± 0% +2.94% (p=0.000 n=18+16)
FmtFprintfInt-12 114ns ± 1% 117ns ± 0% +3.01% (p=0.000 n=19+15)
FmtFprintfIntInt-12 176ns ± 1% 182ns ± 0% +3.17% (p=0.000 n=20+15)
FmtFprintfPrefixedInt-12 186ns ± 1% 187ns ± 1% +1.04% (p=0.000 n=20+19)
FmtFprintfFloat-12 251ns ± 1% 250ns ± 1% -0.74% (p=0.000 n=17+18)
FmtManyArgs-12 746ns ± 1% 761ns ± 0% +2.08% (p=0.000 n=19+20)
GobDecode-12 6.57ms ± 1% 6.65ms ± 1% +1.11% (p=0.000 n=19+20)
GobEncode-12 5.59ms ± 1% 5.65ms ± 0% +1.08% (p=0.000 n=17+17)
Gzip-12 223ms ± 1% 223ms ± 1% -0.31% (p=0.006 n=20+20)
Gunzip-12 38.0ms ± 0% 37.9ms ± 1% -0.25% (p=0.009 n=19+20)
HTTPClientServer-12 77.5µs ± 1% 78.9µs ± 2% +1.89% (p=0.000 n=20+20)
JSONEncode-12 14.7ms ± 1% 14.9ms ± 0% +0.75% (p=0.000 n=20+20)
JSONDecode-12 53.0ms ± 1% 55.9ms ± 1% +5.54% (p=0.000 n=19+19)
Mandelbrot200-12 3.81ms ± 0% 3.81ms ± 1% +0.20% (p=0.023 n=17+19)
GoParse-12 3.17ms ± 1% 3.18ms ± 1% ~ (p=0.057 n=20+19)
RegexpMatchEasy0_32-12 71.7ns ± 1% 70.4ns ± 1% -1.77% (p=0.000 n=19+20)
RegexpMatchEasy0_1K-12 946ns ± 0% 946ns ± 0% ~ (p=0.405 n=18+18)
RegexpMatchEasy1_32-12 67.2ns ± 2% 67.3ns ± 2% ~ (p=0.732 n=20+20)
RegexpMatchEasy1_1K-12 374ns ± 1% 378ns ± 1% +1.14% (p=0.000 n=18+19)
RegexpMatchMedium_32-12 107ns ± 1% 107ns ± 1% ~ (p=0.259 n=18+20)
RegexpMatchMedium_1K-12 34.2µs ± 1% 34.5µs ± 1% +1.03% (p=0.000 n=18+18)
RegexpMatchHard_32-12 1.77µs ± 1% 1.79µs ± 1% +0.73% (p=0.000 n=19+18)
RegexpMatchHard_1K-12 53.6µs ± 1% 54.2µs ± 1% +1.10% (p=0.000 n=19+19)
Template-12 61.5ms ± 1% 63.9ms ± 0% +3.96% (p=0.000 n=18+18)
TimeParse-12 303ns ± 1% 300ns ± 1% -1.08% (p=0.000 n=19+20)
TimeFormat-12 318ns ± 1% 320ns ± 0% +0.79% (p=0.000 n=19+19)
Revcomp-12 (*) 509ms ± 3% 504ms ± 0% ~ (p=0.967 n=7+12)
[Geo mean] 54.3µs 54.8µs +0.88%
(*) Revcomp is highly non-linear, so I only took samples with 2
iterations.
name old time/op new time/op delta
XGarbage-12 2.25ms ± 0% 2.32ms ± 1% +2.74% (p=0.000 n=16+16)
XJSON-12 11.6ms ± 0% 12.4ms ± 0% +6.81% (p=0.000 n=18+18)
XHTTP-12 11.6µs ± 1% 11.8µs ± 1% +1.62% (p=0.000 n=17+18)
Updates #17503.
Updates #17099, since you can't have a rescan list bug if there's no
rescan list. I'm not marking it as fixed, since gcrescanstacks can
still be set to re-enable the rescan lists.
Change-Id: I6e926b4c2dbd4cd56721869d4f817bdbb330b851
Reviewed-on: https://go-review.googlesource.com/31766
Reviewed-by: Rick Hudson <rlh@golang.org>
This implements the unconditional version of the hybrid deletion write
barrier, which always shades both the old and new pointer. It's
unconditional for now because barriers on channel operations require
checking both the source and destination stacks and we don't have a
way to funnel this information into the write barrier at the moment.
As part of this change, we modify the typed memclr operations
introduced earlier to invoke the write barrier.
This has basically no overall effect on benchmark performance. This is
good, since it indicates that neither the extra shade nor the new bulk
clear barriers have much effect. It also has little effect on latency.
This is expected, since we haven't yet modified mark termination to
take advantage of the hybrid barrier.
Updates #17503.
Change-Id: Iebedf84af2f0e857bd5d3a2d525f760b5cf7224b
Reviewed-on: https://go-review.googlesource.com/31765
Reviewed-by: Rick Hudson <rlh@golang.org>
With the hybrid barrier, unless we're doing a STW GC or hit a very
rare race (~once per all.bash) that can start mark termination before
all of the work is drained, we don't need to drain the work queue at
all. Even draining an empty work queue is rather expensive since we
have to enter the getfull() barrier, so it's worth avoiding this.
Conveniently, it's quite easy to detect whether or not we actually
need the getufull() barrier: since the world is stopped when we enter
mark termination, everything must have flushed its work to the work
queue, so we can just check the queue. If the queue is empty and we
haven't queued up any jobs that may create more work (which should
always be the case with the hybrid barrier), we can simply have all GC
workers perform non-blocking drains.
Also conveniently, this solution is quite safe. If we do somehow screw
something up and there's work on the work queue, some worker will
still process it, it just may not happen in parallel.
This is not the "right" solution, but it's simple, expedient,
low-risk, and maintains compatibility with debug.gcrescanstacks. When
we remove the gcrescanstacks fallback in Go 1.9, we should also fix
the race that starts mark termination early, and then we can eliminate
work draining from mark termination.
Updates #17503.
Change-Id: I7b3cd5de6a248ab29d78c2b42aed8b7443641361
Reviewed-on: https://go-review.googlesource.com/32186
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently bulkBarrierPreWrite calls writebarrierptr_prewrite, but this
means that we check writeBarrier.needed twice and perform cgo checks
twice.
Change bulkBarrierPreWrite to call writebarrierptr_prewrite1 to skip
over these duplicate checks.
This may speed up bulkBarrierPreWrite slightly, but mostly this will
save us from running out of nosplit stack space on ppc64x in the near
future.
Updates #17503.
Change-Id: I1cea1a2207e884ab1a279c6a5e378dcdc048b63e
Reviewed-on: https://go-review.googlesource.com/31890
Reviewed-by: Rick Hudson <rlh@golang.org>
gobuf.ctxt is set to nil from many places in assembly code and these
assignments require write barriers with the hybrid barrier.
Conveniently, in most of these places ctxt should already be nil, in
which case we don't need the barrier. This commit changes these places
to assert that ctxt is already nil.
gogo is more complicated, since ctxt may not already be nil. For gogo,
we manually perform the write barrier if ctxt is not nil.
Updates #17503.
Change-Id: I9d75e27c75a1b7f8b715ad112fc5d45ffa856d30
Reviewed-on: https://go-review.googlesource.com/31764
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, we perform write barriers after performing pointer writes.
At the moment, it simply doesn't matter what order this happens in, as
long as they appear atomic to GC. But both the hybrid barrier and ROC
are going to require a pre-write write barrier.
For the hybrid barrier, this is important because the barrier needs to
observe both the current value of the slot and the value that will be
written to it. (Alternatively, the caller could do the write and pass
in the old value, but it seems easier and more useful to just swap the
order of the barrier and the write.)
For ROC, this is necessary because, if the pointer write is going to
make the pointer reachable to some goroutine that it currently is not
visible to, the garbage collector must take some special action before
that pointer becomes more broadly visible.
This commits swaps pointer writes around so the write barrier occurs
before the pointer write.
The main subtlety here is bulk memory writes. Currently, these copy to
the destination first and then use the pointer bitmap of the
destination to find the copied pointers and invoke the write barrier.
This is necessary because the source may not have a pointer bitmap. To
handle these, we pass both the source and the destination to the bulk
memory barrier, which uses the pointer bitmap of the destination, but
reads the pointer values from the source.
Updates #17503.
Change-Id: I78ecc0c5c94ee81c29019c305b3d232069294a55
Reviewed-on: https://go-review.googlesource.com/31763
Reviewed-by: Rick Hudson <rlh@golang.org>
We reject import of main packages, but we missed tests.
Reject in all tests except test of that main package.
We reject local (relative) imports from code with a
non-local import path, but again we missed tests.
Reject those too.
Fixes#14811.
Fixes#15795.
Fixes#17475.
Change-Id: I535ff26889520276a891904f54f1a85b2c40207d
Reviewed-on: https://go-review.googlesource.com/31821
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
Materialize float constant 0 from integer zero register, instead
of loading from constant pool.
Also fix assembling FMOV from zero register to FP register.
Change-Id: Ie413dd342cedebdb95ba8cfc220e23ed2a39e885
Reviewed-on: https://go-review.googlesource.com/32250
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Apparently on macOS Sierra LLDB thinks /usr/lib/dyld is mapped
at address 0, even if Go code starts at 0x1000, and it looks up
addresses from dyld which shadows Go symbols. Move Go binary at
a higher address to avoid clash.
Fixes#17463. Re-enable TestLldbPython.
Change-Id: I89ca6f3ee48aa6da9862bfa0c2da91477cc93255
Reviewed-on: https://go-review.googlesource.com/32185
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
As for dropg, save is writing a nil pointer that will generate a write
barrier with the hybrid barrier. However, in this case, ctxt always
should already be nil, so replace the write with an assertion that
this is the case.
At this point, we're ready to disable the write barrier elision
optimizations that interfere with the hybrid barrier.
Updates #17503.
Change-Id: I83208e65aa33403d442401f355b2e013ab9a50e9
Reviewed-on: https://go-review.googlesource.com/31571
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently this contains no write barriers because it's writing nil
pointers, but with the hybrid barrier, even these will produce write
barriers. However, since these are *gs and *ms, they don't need write
barriers, so we can simply eliminate them.
Updates #17503.
Change-Id: Ib188a60492c5cfb352814bf9b2bcb2941fb7d6c0
Reviewed-on: https://go-review.googlesource.com/31570
Reviewed-by: Rick Hudson <rlh@golang.org>
The hybrid barrier requires allocate-black, but there's one case where
we don't currently allocate black: the tiny allocator. If we allocate
a *new* tiny alloc block during GC, it will be allocated black, but if
we allocated the current block before GC, it won't be black, and the
further allocations from it won't mark it, which means we may free a
reachable tiny block during sweeping.
Fix this by passing over all mcaches at the beginning of mark, while
the world is still stopped, and greying their tiny blocks.
Updates #17503.
Change-Id: I04d4df7cc2f553f8f7b1e4cb0b52e2946588111a
Reviewed-on: https://go-review.googlesource.com/31456
Reviewed-by: Rick Hudson <rlh@golang.org>
The hybrid barrier requires barriers on stack-to-stack copies if
either stack is grey. There are only two instances of this in the
runtime: channel sends and starting a goroutine. Channel sends already
use typedmemmove and hence have the necessary barriers. This commits
adds barriers for the stack-to-stack copy when starting a goroutine.
Updates #17503.
Change-Id: Ibb55e08127ca4d021ac54be61cb96732efa5df5b
Reviewed-on: https://go-review.googlesource.com/31455
Reviewed-by: Rick Hudson <rlh@golang.org>
Original Change by Daria Kolistratova <daria.kolistratova@intel.com>
Added functions with suffix proto and stuff from pprof tool to translate
to protobuf. Done as the profile proto is more extensible than the legacy
pprof format and is pprof's preferred profile format. Large part was taken
from https://github.com/google/pprof tool. Tested by hand and compared the
result with translated by pprof tool, profiles are identical.
Fixes#16093
Change-Id: I2751345b09a66ee2b6aa64be76cba4cd1c326aa6
Reviewed-on: https://go-review.googlesource.com/32257
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Waiting 2ms for all the kicked-off goroutines to run and block
seems a little optimistic. No harm done by waiting for 200ms instead.
Fixes#17238.
Change-Id: I827532ea2f5f1f3ed04179f8957dd2c563946ed0
Reviewed-on: https://go-review.googlesource.com/32103
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently we initialize LR on a new stack by writing nil to it. But
this is an initializing write since the newly allocated stack is not
zeroed, so this is unsafe with the hybrid barrier. Change this is a
uintptr write to avoid a bad write barrier.
Updates #17503.
Change-Id: I062ac352e35df7da4644c1f2a5aaab87049d1f60
Reviewed-on: https://go-review.googlesource.com/32093
Reviewed-by: Rick Hudson <rlh@golang.org>
We reuse finalizers in finblocks, which are allocated off-heap. This
means they have to be zero-initialized before becoming visible to the
garbage collector. We actually already do this by clearing the
finalizer before returning it to the pool, but we're not careful to
enforce correct memory ordering. Fix this by manipulating the
finalizer count atomically so these writes synchronize properly with
the garbage collector.
Updates #17503.
Change-Id: I7797d31df3c656c9fe654bc6da287f66a9e2037d
Reviewed-on: https://go-review.googlesource.com/31454
Reviewed-by: Rick Hudson <rlh@golang.org>
runfinq allocates a stack frame on the heap for constructing the
finalizer function calls and reuses it for each call. However, because
the type of this frame is constantly shifting, it tells mallocgc there
are no pointers in it and it acts essentially like uninitialized
memory between uses. But runfinq uses pointer writes with write
barriers to "initialize" this memory, which is not going to be safe
with the hybrid barrier, since the hybrid barrier may see a stale
pointer left in the "uninitialized" frame.
Fix this by zero-initializing the argument values in the frame before
writing the argument pointers.
Updates #17503.
Change-Id: I951c0a2be427eb9082a32d65c4410e6fdef041be
Reviewed-on: https://go-review.googlesource.com/31453
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently, zeroing generates an ssa.OpZero, which never has write
barriers, even if the assignment is an OASWB. The hybrid barrier
requires write barriers on zeroing, so change OASWB to generate an
ssa.OpZeroWB when assigning the zero value, which turns into a
typedmemclr.
Updates #17503.
Change-Id: Ib37ac5e39f578447dbd6b36a6a54117d5624784d
Reviewed-on: https://go-review.googlesource.com/31451
Reviewed-by: Cherry Zhang <cherryyz@google.com>
If a slice's backing store has pointers, we need to lower clears of
that slice to memclrHasPointers instead of memclrNoHeapPointers.
Updates #17503.
Change-Id: I20750e4bf57f7b8862f3d898bfb32d964b91d07b
Reviewed-on: https://go-review.googlesource.com/31450
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The basic structure of Part.Read should be simple:
do what you can with the current buffered data,
reading more as you need it. Make it that way.
Working entirely in the bufio.Reader's buffer eliminates
the need for an additional bytes.Buffer.
This structure should be easier to extend in the future as
more special cases arise.
Change-Id: I83cb24a755a1767c4c037f9ece6716460c3ecd01
Reviewed-on: https://go-review.googlesource.com/32092
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since barrier-less memclr is only safe in very narrow circumstances,
this commit renames memclr to avoid accidentally calling memclr on
typed memory. This can cause subtle, non-deterministic bugs, so it's
worth some effort to prevent. In the near term, this will also prevent
bugs creeping in from any concurrent CLs that add calls to memclr; if
this happens, whichever patch hits master second will fail to compile.
This also adds the other new memclr variants to the compiler's
builtin.go to minimize the churn on that binary blob. We'll use these
in future commits.
Updates #17503.
Change-Id: I00eead049f5bd35ca107ea525966831f3d1ed9ca
Reviewed-on: https://go-review.googlesource.com/31369
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently fixalloc does not zero memory it reuses. This is dangerous
with the hybrid barrier if the type may contain heap pointers, since
it may cause us to observe a dead heap pointer on reuse. It's also
error-prone since it's the only allocator that doesn't zero on
allocation (mallocgc of course zeroes, but so do persistentalloc and
sysAlloc). It's also largely pointless: for mcache, the caller
immediately memclrs the allocation; and the two specials types are
tiny so there's no real cost to zeroing them.
Change fixalloc to zero allocations by default.
The only type we don't zero by default is mspan. This actually
requires that the spsn's sweepgen survive across freeing and
reallocating a span. If we were to zero it, the following race would
be possible:
1. The current sweepgen is 2. Span s is on the unswept list.
2. Direct sweeping sweeps span s, finds it's all free, and releases s
to the fixalloc.
3. Thread 1 allocates s from fixalloc. Suppose this zeros s, including
s.sweepgen.
4. Thread 1 calls s.init, which sets s.state to _MSpanDead.
5. On thread 2, background sweeping comes across span s in allspans
and cas's s.sweepgen from 0 (sg-2) to 1 (sg-1). Now it thinks it
owns it for sweeping. 6. Thread 1 continues initializing s.
Everything breaks.
I would like to fix this because it's obviously confusing, but it's a
subtle enough problem that I'm leaving it alone for now. The solution
may be to skip sweepgen 0, but then we have to think about wrap-around
much more carefully.
Updates #17503.
Change-Id: Ie08691feed3abbb06a31381b94beb0a2e36a0613
Reviewed-on: https://go-review.googlesource.com/31368
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently the zero value of an mspan is in the "in use" state. This
seems like a bad idea in general. But it's going to wreak havoc when
we make fixalloc zero allocations: even "freed" mspan objects are
still on the allspans list and still get looked at by the garbage
collector. Hence, if we leave the mspan states the way they are,
allocating a span that reuses old memory will temporarily pass that
span (which is visible to GC!) through the "in use" state, which can
cause "unswept span" panics.
Fix all of this by making the zero state "dead".
Updates #17503.
Change-Id: I77c7ac06e297af4b9e6258bc091c37abe102acc3
Reviewed-on: https://go-review.googlesource.com/31367
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The hybrid barrier requires distinguishing typed and untyped memory
even when zeroing because the *current* contents of the memory matters
even when overwriting.
This commit introduces runtime.typedmemclr and runtime.memclrHasPointers
as a typed memory clearing functions parallel to runtime.typedmemmove.
Currently these simply call memclr, but with the hybrid barrier we'll
need to shade any pointers we're overwriting. These will provide us
with the necessary hooks to do so.
Updates #17503.
Change-Id: I74478619f8907825898092aaa204d6e4690f27e6
Reviewed-on: https://go-review.googlesource.com/31366
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently all mcaches are flushed in a single STW root job. This takes
about 5 µs per P, but since it's done sequentially it adds about
5*GOMAXPROCS µs to the STW.
Fix this by parallelizing the job. Since there are exactly GOMAXPROCS
mcaches to flush, this parallelizes quite nicely and brings the STW
latency cost down to a constant 5 µs (assuming GOMAXPROCS actually
reflects the number of CPUs).
Updates #17503.
Change-Id: Ibefeb1c2229975d5137c6e67fac3b6c92103742d
Reviewed-on: https://go-review.googlesource.com/32033
Reviewed-by: Rick Hudson <rlh@golang.org>
Added functions with suffix proto and stuff from pprof tool to translate
to protobuf. Done as the profile proto is more extensible than the legacy
pprof format and is pprof's preferred profile format. Large part was taken
from https://github.com/google/pprof tool. Tested by hand and compared the
result with translated by pprof tool, profiles are identical.
Fixes#16093
Change-Id: I5acdb2809cab0d16ed4694fdaa7b8ddfd68df11e
Reviewed-on: https://go-review.googlesource.com/30556
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
The current logic in gcDrain conflates non-blocking with preemptible
draining for root jobs. As a result, if you do a non-blocking (but
*not* preemptible) drain, like dedicated workers do, the root job
drain will stop if preempted and fall through to heap marking jobs,
which won't stop until it fails to get a heap marking job.
This commit fixes the condition on root marking jobs so they only stop
when preempted if the drain is preemptible.
Coincidentally, this also fixes a nil pointer dereference if we call
gcDrain with gcDrainNoBlock and without a user G, since it tries to
get the preempt flag from the nil user G. This combination never
happens right now, but will in the future.
Change-Id: Ia910ec20a9b46237f7926969144a33b1b4a7b2f9
Reviewed-on: https://go-review.googlesource.com/32291
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This adds support to the runtime/trace test for saving traces
collected by its tests to disk and a script in internal/trace that
uses this to collect canned traces for the trace test suite. This can
be used to add to the test suite when we introduce a new trace format
version.
Change-Id: Id9ac1ff312235bf02f982fdfff8a827f54035758
Reviewed-on: https://go-review.googlesource.com/32290
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
In a large codebase within Google, there are thousands of uses of:
ContainsAny|IndexAny|LastIndexAny|Trim|TrimLeft|TrimRight
An analysis of their usage shows that over 97% of them only use character
sets consisting of only ASCII symbols.
Uses of ContainsAny|IndexAny|LastIndexAny:
6% are 1 character (e.g., "\n" or " ")
58% are 2-4 characters (e.g., "<>" or "\r\n\t ")
24% are 5-9 characters (e.g., "()[]*^$")
10% are 10+ characters (e.g., "+-=&|><!(){}[]^\"~*?:\\/ ")
We optimize for ASCII sets, which are commonly used to search for
"control" characters in some string. We don't optimize for the
single character scenario since IndexRune or IndexByte could be used.
Uses of Trim|TrimLeft|TrimRight:
71% are 1 character (e.g., "\n" or " ")
14% are 2 characters (e.g., "\r\n")
10% are 3-4 characters (e.g., " \t\r\n")
5% are 10+ characters (e.g., "0123456789abcdefABCDEF")
We optimize for the single character case with a simple closured function
that only checks for that character's value. We optimize for the medium
and larger sets using a 16-byte bit-map representing a set of ASCII characters.
The benchmarks below have the following suffix name "%d:%d" where the first
number is the length of the input and the second number is the length
of the charset.
== bytes package ==
benchmark old ns/op new ns/op delta
BenchmarkIndexAnyASCII/1:1-4 5.09 5.23 +2.75%
BenchmarkIndexAnyASCII/1:2-4 5.81 5.85 +0.69%
BenchmarkIndexAnyASCII/1:4-4 7.22 7.50 +3.88%
BenchmarkIndexAnyASCII/1:8-4 11.0 11.1 +0.91%
BenchmarkIndexAnyASCII/1:16-4 17.5 17.8 +1.71%
BenchmarkIndexAnyASCII/16:1-4 36.0 34.0 -5.56%
BenchmarkIndexAnyASCII/16:2-4 46.6 36.5 -21.67%
BenchmarkIndexAnyASCII/16:4-4 78.0 40.4 -48.21%
BenchmarkIndexAnyASCII/16:8-4 136 47.4 -65.15%
BenchmarkIndexAnyASCII/16:16-4 254 61.5 -75.79%
BenchmarkIndexAnyASCII/256:1-4 542 388 -28.41%
BenchmarkIndexAnyASCII/256:2-4 705 382 -45.82%
BenchmarkIndexAnyASCII/256:4-4 1089 386 -64.55%
BenchmarkIndexAnyASCII/256:8-4 1994 394 -80.24%
BenchmarkIndexAnyASCII/256:16-4 3843 411 -89.31%
BenchmarkIndexAnyASCII/4096:1-4 8522 5873 -31.08%
BenchmarkIndexAnyASCII/4096:2-4 11253 5861 -47.92%
BenchmarkIndexAnyASCII/4096:4-4 17824 5883 -66.99%
BenchmarkIndexAnyASCII/4096:8-4 32053 5871 -81.68%
BenchmarkIndexAnyASCII/4096:16-4 60512 5888 -90.27%
BenchmarkTrimASCII/1:1-4 79.5 70.8 -10.94%
BenchmarkTrimASCII/1:2-4 79.0 105 +32.91%
BenchmarkTrimASCII/1:4-4 79.6 109 +36.93%
BenchmarkTrimASCII/1:8-4 78.8 118 +49.75%
BenchmarkTrimASCII/1:16-4 80.2 132 +64.59%
BenchmarkTrimASCII/16:1-4 243 116 -52.26%
BenchmarkTrimASCII/16:2-4 243 171 -29.63%
BenchmarkTrimASCII/16:4-4 243 176 -27.57%
BenchmarkTrimASCII/16:8-4 241 184 -23.65%
BenchmarkTrimASCII/16:16-4 238 199 -16.39%
BenchmarkTrimASCII/256:1-4 2580 840 -67.44%
BenchmarkTrimASCII/256:2-4 2603 1175 -54.86%
BenchmarkTrimASCII/256:4-4 2572 1188 -53.81%
BenchmarkTrimASCII/256:8-4 2550 1191 -53.29%
BenchmarkTrimASCII/256:16-4 2585 1208 -53.27%
BenchmarkTrimASCII/4096:1-4 39773 12181 -69.37%
BenchmarkTrimASCII/4096:2-4 39946 17231 -56.86%
BenchmarkTrimASCII/4096:4-4 39641 17179 -56.66%
BenchmarkTrimASCII/4096:8-4 39835 17175 -56.88%
BenchmarkTrimASCII/4096:16-4 40229 17215 -57.21%
== strings package ==
benchmark old ns/op new ns/op delta
BenchmarkIndexAnyASCII/1:1-4 5.94 4.97 -16.33%
BenchmarkIndexAnyASCII/1:2-4 5.94 5.55 -6.57%
BenchmarkIndexAnyASCII/1:4-4 7.45 7.21 -3.22%
BenchmarkIndexAnyASCII/1:8-4 10.8 10.6 -1.85%
BenchmarkIndexAnyASCII/1:16-4 17.4 17.2 -1.15%
BenchmarkIndexAnyASCII/16:1-4 36.4 32.2 -11.54%
BenchmarkIndexAnyASCII/16:2-4 49.6 34.6 -30.24%
BenchmarkIndexAnyASCII/16:4-4 77.5 37.9 -51.10%
BenchmarkIndexAnyASCII/16:8-4 138 45.5 -67.03%
BenchmarkIndexAnyASCII/16:16-4 241 59.1 -75.48%
BenchmarkIndexAnyASCII/256:1-4 509 378 -25.74%
BenchmarkIndexAnyASCII/256:2-4 720 381 -47.08%
BenchmarkIndexAnyASCII/256:4-4 1142 384 -66.37%
BenchmarkIndexAnyASCII/256:8-4 1999 391 -80.44%
BenchmarkIndexAnyASCII/256:16-4 3735 403 -89.21%
BenchmarkIndexAnyASCII/4096:1-4 7973 5824 -26.95%
BenchmarkIndexAnyASCII/4096:2-4 11432 5809 -49.19%
BenchmarkIndexAnyASCII/4096:4-4 18327 5819 -68.25%
BenchmarkIndexAnyASCII/4096:8-4 33059 5828 -82.37%
BenchmarkIndexAnyASCII/4096:16-4 59703 5817 -90.26%
BenchmarkTrimASCII/1:1-4 71.9 71.8 -0.14%
BenchmarkTrimASCII/1:2-4 73.3 103 +40.52%
BenchmarkTrimASCII/1:4-4 71.8 106 +47.63%
BenchmarkTrimASCII/1:8-4 71.2 113 +58.71%
BenchmarkTrimASCII/1:16-4 71.6 128 +78.77%
BenchmarkTrimASCII/16:1-4 152 116 -23.68%
BenchmarkTrimASCII/16:2-4 160 168 +5.00%
BenchmarkTrimASCII/16:4-4 172 170 -1.16%
BenchmarkTrimASCII/16:8-4 200 177 -11.50%
BenchmarkTrimASCII/16:16-4 254 193 -24.02%
BenchmarkTrimASCII/256:1-4 1438 864 -39.92%
BenchmarkTrimASCII/256:2-4 1551 1195 -22.95%
BenchmarkTrimASCII/256:4-4 1770 1200 -32.20%
BenchmarkTrimASCII/256:8-4 2195 1216 -44.60%
BenchmarkTrimASCII/256:16-4 3054 1224 -59.92%
BenchmarkTrimASCII/4096:1-4 21726 12557 -42.20%
BenchmarkTrimASCII/4096:2-4 23586 17508 -25.77%
BenchmarkTrimASCII/4096:4-4 26898 17510 -34.90%
BenchmarkTrimASCII/4096:8-4 33714 17595 -47.81%
BenchmarkTrimASCII/4096:16-4 47429 17700 -62.68%
The benchmarks added test the worst case. For IndexAny, that is when the
charset matches none of the input. For Trim, it is when the charset matches
all of the input.
Change-Id: I970874d101a96b33528fc99b165379abe58cf6ea
Reviewed-on: https://go-review.googlesource.com/31593
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Martin Möhrmann <martisch@uos.de>
The report in #17414 points out that if you have many many templates,
then this is an overwhelming list and just hurts the signal-to-noise ratio of the error.
Even the test of the old behavior also supports the idea that this is noise:
template: empty: "empty" is an incomplete or empty template; defined templates are: "secondary"
The chance that someone mistyped "secondary" as "empty" is slim at best.
Similarly, the compiler does not augment an error like 'unknown variable x'
by dumping the full list of all the known variables.
For all these reasons, drop the list.
Fixes#17414.
Change-Id: I78f92d2c591df7218385fe723a4abc497913acf8
Reviewed-on: https://go-review.googlesource.com/32116
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This lets quotedprintable handle some inputs found in the wild,
most notably generated by "Microsoft CDO for Exchange 2000",
and it also matches how Python's quopri package handles these inputs.
Fixes#13219.
Change-Id: I69d400659d01b6ea0f707b7053d61803a85b4799
Reviewed-on: https://go-review.googlesource.com/32174
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
We thought it would at the time, but then Beta 4 changed the ABI
again, so it wasn't true in practice.
Fixes#17643
Change-Id: I36b747bd69a56adc7291fa30d6bffdf67ab8741b
Reviewed-on: https://go-review.googlesource.com/32238
Reviewed-by: Russ Cox <rsc@golang.org>
Currently when a goroutine blocks on a GC assist, it emits a generic
EvGoBlock event. Since assist blocking events and, in particular, the
length of the blocked assist queue, are important for diagnosing GC
behavior, this commit adds a new EvGoBlockGC event for blocking on a
GC assist. The trace viewer uses this event to report a "waiting on
GC" count in the "Goroutines" row. This makes sense because, unlike
other blocked goroutines, these goroutines do have work to do, so
being blocked on a GC assist is quite similar to being in the
"runnable" state, which we also report in the trace viewer.
Change-Id: Ic21a326992606b121ea3d3d00110d8d1fdc7a5ef
Reviewed-on: https://go-review.googlesource.com/30704
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Currently the trace tool tracks an overall counts of goroutine states,
but not the states of any individual goroutine. We're about to add
more sophisticated blocked-state tracking, so add this tracking and
base the state counts off the tracked goroutine states.
Change-Id: I943ed61782436cf9540f4ee26c5561715c5b4a1d
Reviewed-on: https://go-review.googlesource.com/30703
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Currently mark workers are shown in the trace as regular goroutines
labeled "runtime.gcBgMarkWorker". That's somewhat unhelpful to an end
user because of the opaque label and particularly unhelpful to runtime
developers because it doesn't distinguish the different types of mark
workers.
Fix this by introducing a variant of the GoStart event called
GoStartLabel that lets the runtime indicate a label for a goroutine
execution span and using this to label mark worker executions as "GC
(<mode>)" in the trace viewer.
Since this bumps the trace version to 1.8, we also add test data for
1.7 traces.
Change-Id: Id7b9c0536508430c661ffb9e40e436f3901ca121
Reviewed-on: https://go-review.googlesource.com/30702
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
The mechanism is initially introduced (and reviewed) in CL 30597
on S390X.
Reduce number of "spilled value remains" by 0.4% in cmd/go.
Disabled on ARMv5 because LR is clobbered almost everywhere with
inserted softfloat calls.
Change-Id: I2934737ce2455909647ed2118fe2bd6f0aa5ac52
Reviewed-on: https://go-review.googlesource.com/32178
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The current implementation for Power architecture does not include the vector
scalar (VSX) registers. This adds the 63 VSX registers and the most commonly
used instructions: load/store VSX vector/scalar, move to/from VSR, logical
operations, select, merge, splat, permute, shift, FP-FP conversion, FP-integer
conversion and integer-FP conversion.
Change-Id: I0f7572d2359fe7f3ea0124a1eb1b0bebab33649e
Reviewed-on: https://go-review.googlesource.com/30510
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, gcDrain looks for the preemption flag at getg().preempt.
However, commit d6625ca moved mark worker draining to the system
stack, which means getg() returns the g0, which never has the preempt
flag set, so idle and fractional workers don't get preempted after
10ms and just run until they run out of work. As a result, if there's
enough idle time, GC becomes effectively STW.
Fix this by looking for the preemption flag on getg().m.curg, which
will always be the user G (where the preempt flag is set), regardless
of whether gcDrain is running on the user or the g0 stack.
Change-Id: Ib554cf49a705b86ccc3d08940bc869f868c50dd2
Reviewed-on: https://go-review.googlesource.com/32251
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
runtime.SetMutexProfileFraction(n int) will capture 1/n-th of stack
traces of goroutines holding contended mutexes if n > 0. From runtime/pprof,
pprot.Lookup("mutex").WriteTo writes the accumulated
stack traces to w (in essentially the same format that blocking
profiling uses).
Change-Id: Ie0b54fa4226853d99aa42c14cb529ae586a8335a
Reviewed-on: https://go-review.googlesource.com/29650
Reviewed-by: Austin Clements <austin@google.com>
- removes the runtime function stringtoslicebytetmp
- removes the generation of calls to stringtoslicebytetmp from the frontend
- adds handling of OSTRARRAYBYTETMP in the backend
This reduces binary sizes and avoids function call overhead.
Change-Id: Ib9988d48549cee663b685b4897a483f94727b940
Reviewed-on: https://go-review.googlesource.com/32158
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For cases where we already have the ops, combine
sign or zero extension with the previous load
(even if the load is larger width).
Update #15105
Change-Id: I76c5ddd69e1f900d2a17d35503083bd3b4978e48
Reviewed-on: https://go-review.googlesource.com/28190
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
When we do
var x []byte = ...
y := x[i:]
We can't just use y.ptr = x.ptr + i, as the new pointer may point to the
next object in memory after the backing array.
We used to fix this by doing:
y.cap = x.cap - i
delta := i
if y.cap == 0 {
delta = 0
}
y.ptr = x.ptr + delta
That generates a branch in what is otherwise straight-line code.
Better to do:
y.cap = x.cap - i
mask := (y.cap - 1) >> 63 // -1 if y.cap==0, 0 otherwise
y.ptr = x.ptr + i &^ mask
It's about the same number of instructions (~4, depending on what
parts are constant, and the target architecture), but it is all
inline. It plays nicely with CSE, and the mask can be computed
in parallel with the index (in cases where a multiply is required).
It is a minor win in both speed and space.
Change-Id: Ied60465a0b8abb683c02208402e5bb7ac0e8370f
Reviewed-on: https://go-review.googlesource.com/32022
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
I had added this originally so we can play with different notations
but it doesn't make sense to keep it around since gofmt will convert
a type alias declaration using "=" into one using "=>" anyhow. More
importantly, the spec doesn't permit it.
Change-Id: Icb010b5a9976aebf877e48b3ce9d7245559ca494
Reviewed-on: https://go-review.googlesource.com/32105
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Otherwise, the way the ELF dynamic linker works means that you can end up with
the same itab being passed to additab twice, leading to the itab linked list
having a cycle in it. Add a test to additab in runtime to catch this when it
happens, not some arbitrary and surprsing time later.
Fixes#17594
Change-Id: I6c82edcc9ac88ac188d1185370242dc92f46b1ad
Reviewed-on: https://go-review.googlesource.com/32131
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change updates the vendored version of the poly1305 package to
match the latest version from x/crypto. This pulls in this change:
commit 1150b8bd09e53aea1d415621adae9bad665061a1
Author: Adam Langley <agl@golang.org>
Date: Fri Oct 21 15:59:10 2016 -0700
poly1305: don't move R13 in sum_arm.s.
Rather than change the value of R13 during the execution, keep R13 fixed
(after the initial prelude) and always use offsets from it.
This should help the runtime figure out what's going on if, say, a
signal should occur while running this code.
I've also trimmed the set of saved registers since Go doesn't require
the callee to maintain anything except R10 and R13.
Change-Id: Ifbeca73c1d964cc43bb7f8c20c61066f22fd562d
Reviewed-on: https://go-review.googlesource.com/31717
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Change-Id: I376b3e5d53aaded891e02801bd5faa5ff758da0d
Reviewed-on: https://go-review.googlesource.com/32227
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When MSIE sends a full file path (in "intranet mode"), it does not
escape backslashes: "C:\dev\go\foo.txt", not "C:\\dev\\go\\foo.txt".
No known MIME generators emit unnecessary backslash escapes
for simple token characters like numbers and letters.
If we see an unnecessary backslash escape, assume it is from MSIE
and intended as a literal backslash. This makes Go servers deal better
with MSIE without affecting the way they handle conforming MIME
generators.
Fixes#15664.
Change-Id: Ia3b03b978317d968dc11b2f6de1df913c6bcbfcc
Reviewed-on: https://go-review.googlesource.com/32175
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 12905 disallowed "Bob" <""@example.com> but inadvertently
also disallowed "" <bob@example.com>. Move the empty string
check to apply only in the addr-spec.
Fixes#14866.
Change-Id: Ia0b7a1a32810aa78157ae77bd0130b78154c460d
Reviewed-on: https://go-review.googlesource.com/32176
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Assembly copied from the clock_gettime(CLOCK_MONOTONIC)
call in runtime.nanotime in these files and then modified to use
CLOCK_REALTIME.
Also comment system call numbers in a few other files.
Fixes#11222.
Change-Id: Ie132086de7386f865908183aac2713f90fc73e0d
Reviewed-on: https://go-review.googlesource.com/32177
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL completes support for alias declarations in the compiler.
Also:
- increased export format version
- updated various comments
For #16339.
Fixes#17487.
Change-Id: Ic6945fc44c0041771eaf9dcfe973f601d14de069
Reviewed-on: https://go-review.googlesource.com/32090
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Currently, the selection of a client certificate done internally based
on the limitations given by the server's request and the certifcates in
the Config. This means that it's not possible for an application to
control that selection based on details of the request.
This change adds a callback, GetClientCertificate, that is called by a
Client during the handshake and which allows applications to select the
best certificate at that time.
(Based on https://golang.org/cl/25570/ by Bernd Fix.)
Fixes#16626.
Change-Id: Ia4cea03235d2aa3c9fd49c99c227593c8e86ddd9
Reviewed-on: https://go-review.googlesource.com/32115
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since a root certificate is self-signed, it's a valid child of itself.
If a root certificate appeared both in the pool of intermediates and
roots the verification code could find a chain which included it twice:
first as an intermediate and then as a root. (Existing checks prevented
the code from looping any more.)
This change stops the exact same certificate from appearing twice in a
chain. This simplifies the results in the face of the common
configuration error of a TLS server returning a root certificate.
(This should also stop two different versions of the “same” root
appearing in a chain because the self-signature on one will not validate
for the other.)
Fixes#16800.
Change-Id: I004853baa0eea27b44d47b9b34f96113a92ebac8
Reviewed-on: https://go-review.googlesource.com/32121
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As agreed upon by the Code of Conduct working group, "race" may refer to
an attempt to classify people based on "defining characteristics",
regardless of how this people view themselves, while "ethnicity" refers
to how people identify themselves.
The Code of Conduct working group believes that the term "ethnicity"
will be more comprehensive and inclusive, and will better serve the Go
community.
Change-Id: I724b72cadb8cf29b4bac8f83017b0303feae3c94
Reviewed-on: https://go-review.googlesource.com/32133
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Tests for determinism was not working as intended since io.Copybuffer
uses the io.WriterTo if available.
This exposed that level 0 (no compression) changed output
based on the number of writes and buffers given to the
writer.
Previously, Write would emit a new raw block (BTYPE=00) for
every non-empty call to Write.
This CL fixes it such that a raw block is only emitted upon
the following conditions:
* A full window is obtained (every 65535 bytes)
* Flush is called
* Close is called
Change-Id: I807f866d97e2db7820f11febab30a96266a6cbf1
Reviewed-on: https://go-review.googlesource.com/31174
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
EscScope behaves like EscHeap in current code.
There are no need to handle it specially.
So remove it and use EscHeap instead.
Change-Id: I910106fd147f00e5f4fd52c7dde05128141a5160
Reviewed-on: https://go-review.googlesource.com/32130
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The CloseWrite method sends a close_notify alert record to the other
side of the connection. This record indicates that the sender has
finished sending on the connection. Unlike the Close method, the sender
may still read from the connection until it recieves a close_notify
record (or the underlying connection is closed). This is analogous to a
TCP half-close.
This is a rework of CL 25159 with fixes for the unstable test.
Updates #8579
Change-Id: I47608d2f82a88baff07a90fd64c280ed16a60d5e
Reviewed-on: https://go-review.googlesource.com/31318
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Re-writing the switch statement as a single boolean expression
reduces the number of branches that the compiler generates.
It is also arguably easier to read as a pair of numeric ranges
that valid runes can exist in.
No test changes since the existing test does a good job of
testing all of the boundaries.
This change was to gain back some performance after a correctness
fix done in http://golang.org/cl/32123.
The correctness fix (CL/32123) slowed down the benchmarks slightly:
benchmark old ns/op new ns/op delta
BenchmarkIndexRune/10-4 19.3 21.6 +11.92%
BenchmarkIndexRune/32-4 33.6 35.2 +4.76%
Since the fix relies on utf8.ValidRune, this CL improves benchmarks:
benchmark old ns/op new ns/op delta
BenchmarkIndexRune/10-4 21.6 20.0 -7.41%
BenchmarkIndexRune/32-4 35.2 33.5 -4.83%
Change-Id: Ib1ca10a2e29c90e879a8ef9b7221c33e85d015d8
Reviewed-on: https://go-review.googlesource.com/32122
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In all previous versions of Go, the behavior of IndexRune(s, r)
where r was utf.RuneError was that it would effectively return the
index of any invalid UTF-8 byte sequence (include RuneError).
Optimizations made in http://golang.org/cl/28537 and
http://golang.org/cl/28546 altered this undocumented behavior such
that RuneError would only match on the RuneError rune itself.
Although, the new behavior is arguably reasonable, it did break code
that depended on the previous behavior. Thus, we add special checks
to ensure that we preserve the old behavior.
There is a slight performance hit for correctness:
benchmark old ns/op new ns/op delta
BenchmarkIndexRune/10-4 19.3 21.6 +11.92%
BenchmarkIndexRune/32-4 33.6 35.2 +4.76%
This only occurs on small strings. The performance hit for larger strings
is neglible and not shown.
Fixes#17611
Change-Id: I1d863a741213d46c40b2e1724c41245df52502a5
Reviewed-on: https://go-review.googlesource.com/32123
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
- Removes a subject-verb disagreement.
- Documents that PATCH requests also populate PostForm.
- Explains that r.PostForm is always set (but blank for GET etc.).
Fixes#16609
Change-Id: I6b4693f8eb6db7c66fd9b9cd1df8927f50d46d50
Reviewed-on: https://go-review.googlesource.com/32091
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Don't include package path when creating LSyms for auto and param
variables during Prog generation, and update the DWARF emit routine
accordingly (remove the code that chops off package path from names in
DWARF var location expressions). Implementation suggested by mdempsky@.
The intent of this change is to have saner location expressions in cases
where the variable corresponds to a structure field. For example, the
SSA compiler's "decompose" phase can take a slice value and break it
apart into three scalar variables corresponding to the fields (slice "X"
gets split into "X.len", "X.cap", "X.ptr"). In such cases we want the
name in the location expression to omit the package path but preserve
the original variable name (e.g. "X").
Fixes#16338
Change-Id: Ibc444e7f3454b70fc500a33f0397e669d127daa1
Reviewed-on: https://go-review.googlesource.com/31819
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Sometimes neither the src nor the dst of an escape edge
contains the line number appropriate to the edge, so add
a field so that can be set correctly.
Also updated some of the explanations to be less jargon-y
and perhaps more informative, and folded bug example into
test.
Cleaned up some of the function/method names in esc.go
and did a quick sanity check that each "bundling" function
was actually called often enough to justify its existence.
Fixes#17459.
Change-Id: Ieba53ab0a6ba1f7a6c4962bc0b702ede9cc3a3cc
Reviewed-on: https://go-review.googlesource.com/31660
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, markroot delays scanning mark worker stacks until mark
termination by putting the mark worker G directly on the rescan list
when it encounters one during the mark phase. Without this, since mark
workers are non-preemptible, two mark workers that attempt to scan
each other's stacks can deadlock.
However, this is annoyingly asymmetric and causes some real problems.
First, markroot does not own the G at that point, so it's not
technically safe to add it to the rescan list. I haven't been able to
find a specific problem this could cause, but I suspect it's the root
cause of issue #17099. Second, this will interfere with the hybrid
barrier, since there is no stack rescanning during mark termination
with the hybrid barrier.
This commit switches to a different approach. We move the mark
worker's call to gcDrain to the system stack and set the mark worker's
status to _Gwaiting for the duration of the drain to indicate that
it's preemptible. This lets another mark worker scan its G stack while
the drain is running on the system stack. We don't return to the G
stack until we can switch back to _Grunning, which ensures we don't
race with a stack scan. This lets us eliminate the special case for
mark worker stack scans and scan them just like any other goroutine.
The only subtlety to this approach is that we have to disable stack
shrinking for mark workers; they could be referring to captured
variables from the G stack, so it's not safe to move their stacks.
Updates #17099 and #17503.
Change-Id: Ia5213949ec470af63e24dfce01df357c12adbbea
Reviewed-on: https://go-review.googlesource.com/31820
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
TestRemoveDevNull was added in CL 31657. However, this test
was failing on Plan 9, because /dev/null was considered as
a regular file.
On Plan 9, there is no special mode to distinguish between
device files and regular files.
However, files are served by different servers. For example,
/dev/null is served by #c (devcons), while /bin/cat is served
by #M (devmnt).
We chose to consider only the files served by #M as regular
files. All files served by different servers will be considered
as device files.
Fixes#17598.
Change-Id: Ibb1c3357d742cf2a7de15fc78c9e436dc31982bb
Reviewed-on: https://go-review.googlesource.com/32152
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This allows callers to invoke f.Usage() themselves and get the default
usage handler instead of a panic (from calling a nil function).
Fixes#16955.
Change-Id: Ie337fd9e1f85daf78c5eae7b5c41d5ad8c1f89bf
Reviewed-on: https://go-review.googlesource.com/31576
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
For some reason git won't let me write
doc/effective_go.html: reword confusing sentence
or even
doc/effective_go: reword confusing sentence
as the subject line for this CL, but that's not important. The
actual CL just rewrites one sentence and adds an option to grep in
the associated example.
Fixes#15875
Change-Id: Iee159ea751caf4b73eacf3dfc86e29032646373f
Reviewed-on: https://go-review.googlesource.com/32110
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, if the number of stack barriers for a stack is 0, we'll
create a zero-length slice that points just past the end of the stack
allocation. This bad pointer causes GC panics.
Fix this by creating a nil slice if the stack barrier count is 0.
In practice, the only way this can happen is if
GODEBUG=gcstackbarrieroff=1 is set because even the minimum size stack
reserves space for two stack barriers.
Change-Id: I3527c9a504c445b64b81170ee285a28594e7983d
Reviewed-on: https://go-review.googlesource.com/31762
Reviewed-by: Rick Hudson <rlh@golang.org>
This adds debug code enabled in gccheckmark mode that panics if we
attempt to mark an unallocated object. This is a common issue with the
hybrid barrier when we're manipulating uninitialized memory that
contains stale pointers. This also tends to catch bugs that will lead
to "sweep increased allocation count" crashes closer to the source of
the bug.
Change-Id: I443ead3eac6f316a46f50b106078b524cac317f4
Reviewed-on: https://go-review.googlesource.com/31761
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently reflectcall has a subtle dance with write barriers where the
assembly code copies the result values from the stack to the in-heap
argument frame without write barriers and then calls into the runtime
after the fact to invoke the necessary write barriers.
For the hybrid barrier (and for ROC), we need to switch to a
*pre*-write write barrier, which is very difficult to do with the
current setup. We could tie ourselves in knots of subtle reasoning
about why it's okay in this particular case to have a post-write write
barrier, but this commit instead takes a different approach. Rather
than making things more complex, this simplifies reflection calls so
that the argument copy is done in Go using normal bulk write barriers.
The one difficulty with this approach is that calling into Go requires
putting arguments on the stack, but the call* functions "donate" their
entire stack frame to the called function. We can get away with this
now because the copy avoids using the stack and has copied the results
out before we clobber the stack frame to call into the write barrier.
The solution in this CL is to call another function, passing arguments
in registers instead of on the stack, and let that other function
reserve more stack space and setup the arguments for the runtime.
This approach seemed to work out the best. I also tried making the
call* functions reserve 32 extra bytes of frame for the write barrier
arguments and adjust SP up by 32 bytes around the call. However, even
with the necessary changes to the assembler to correct the spdelta
table, the runtime was still having trouble with the frame layout (and
the changes to the assembler caused many other things that do strange
things with the SP to fail to assemble). The approach I took doesn't
require any funny business with the SP.
Updates #17503.
Change-Id: Ie2bb0084b24d6cff38b5afb218b9e0534ad2119e
Reviewed-on: https://go-review.googlesource.com/31655
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The logic for saving the list of packages was not always
preferring to keep error messages around correctly.
The missed error led to an internal consistency failure later.
Fixes#17119.
Change-Id: I9723b5d2518c25e2cac5249e6a7b907be95b521c
Reviewed-on: https://go-review.googlesource.com/31812
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
If we leave it for compilation sometimes the error appears first
in derived vendor paths, without any indication where they came from.
This is better.
$ go1.7 build canonical/d
cmd/go/testdata/src/canonical/a/a.go:3: non-canonical import path "canonical/a//vendor/c" (should be "canonical/a/vendor/c")
cmd/go/testdata/src/canonical/a/a.go:3: can't find import: "canonical/a//vendor/c"
$ go build canonical/d
package canonical/d
imports canonical/b
imports canonical/a/: non-canonical import path: "canonical/a/" should be "canonical/a"
$
Fixes#16954.
Change-Id: I315ccec92a00d98a08c139b3dc4e17dbc640edd0
Reviewed-on: https://go-review.googlesource.com/31668
Reviewed-by: Quentin Smith <quentin@golang.org>
This is not strictly illegal but it probably should be (too late)
and doesn't mean what it looks like it means:
the second key-value pair has the key ",xml".
Fixes#14466.
Change-Id: I174bccc23fd28affeb87f57f77c6591634ade641
Reviewed-on: https://go-review.googlesource.com/32031
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
This CL introduces some minor changes to match rules more closely
to the instructions they are targeting. s390x logical operation
with immediate instructions typically leave some bits in the
target register unchanged. This means for example that an XOR
with -1 requires 2 instructions. It is better in cases such as
this to create a constant and leave it visible to the compiler
so that it can be reused rather than hiding it in the assembler.
This CL also tweaks the rules a bit to ensure that constants are
folded when possible.
Change-Id: I1c6dee31ece00fc3c5fdf6a24f1abbc91dd2db2a
Reviewed-on: https://go-review.googlesource.com/31754
Reviewed-by: Keith Randall <khr@golang.org>
Currently any warning will make dist fail because the
text will be considered as part of the package list.
Change-Id: I09a14089cd0448c3779e2f767e9356fe3325d8d9
Reviewed-on: https://go-review.googlesource.com/32111
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Andrew Gerrand <adg@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
In the situation where the Client.Jar is set and the Request.Header
has cookies manually inserted, the redirect logic needs to be
able to apply changes to cookies from "Set-Cookie" headers to both
the Jar and the manually inserted Header cookies.
Since Header cookies lack information about the original domain
and path, the logic in this CL simply removes cookies from the
initial Header if any subsequent "Set-Cookie" matches. Thus,
in the event of cookie conflicts, the logic preserves the behavior
prior to change made in golang.org/cl/28930.
Fixes#17494
Updates #4800
Change-Id: I645194d9f97ff4d95bd07ca36de1d6cdf2f32429
Reviewed-on: https://go-review.googlesource.com/31435
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Now that sweeping and span marking use the sweep list, there's no need
for the work.spans snapshot of the allspans list. This change
eliminates the few remaining uses of it, which are either dead code or
can use allspans directly, and removes work.spans and its support
functions.
Change-Id: Id5388b42b1e68e8baee853d8eafb8bb4ff95bb43
Reviewed-on: https://go-review.googlesource.com/30537
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently markrootSpans iterates over all spans ever allocated to find
the in-use spans. Since we now have a list of in-use spans, change it
to iterate over that instead.
This, combined with the previous change, fixes#9265. Before these two
changes, blowing up the heap to 8GB and then shrinking it to a 0MB
live set caused the small-heap portion of the test to run 60x slower
than without the initial blowup. With these two changes, the time is
indistinguishable.
No significant effect on other benchmarks.
Change-Id: I4a27e533efecfb5d18cba3a87c0181a81d0ddc1e
Reviewed-on: https://go-review.googlesource.com/30536
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently sweeping walks the list of all spans, which means the work
in sweeping is proportional to the maximum number of spans ever used.
If the heap was once large but is now small, this causes an
amortization failure: on a small heap, GCs happen frequently, but a
full sweep still has to happen in each GC cycle, which means we spent
a lot of time in sweeping.
Fix this by creating a separate list consisting of just the in-use
spans to be swept, so sweeping is proportional to the number of in-use
spans (which is proportional to the live heap). Specifically, we
create two lists: a list of unswept in-use spans and a list of swept
in-use spans. At the start of the sweep cycle, the swept list becomes
the unswept list and the new swept list is empty. Allocating a new
in-use span adds it to the swept list. Sweeping moves spans from the
unswept list to the swept list.
This fixes the amortization problem because a shrinking heap moves
spans off the unswept list without adding them to the swept list,
reducing the time required by the next sweep cycle.
Updates #9265. This fix eliminates almost all of the time spent in
sweepone; however, markrootSpans has essentially the same bug, so now
the test program from this issue spends all of its time in
markrootSpans.
No significant effect on other benchmarks.
Change-Id: Ib382e82790aad907da1c127e62b3ab45d7a4ac1e
Reviewed-on: https://go-review.googlesource.com/30535
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently we set the len and cap of h.spans to the full reserved
region of the address space and track the actual mapped region
separately in h.spans_mapped. Since we have both the len and cap at
our disposal, change things so len(h.spans) tracks how much of the
spans array is mapped and eliminate h.spans_mapped. This simplifies
mheap and means we'll get nice "index out of bounds" exceptions if we
do try to go off the end of the spans rather than a SIGSEGV.
Change-Id: I8ed9a1a9a844d90e9fd2e269add4704623dbdfe6
Reviewed-on: https://go-review.googlesource.com/30533
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Like h_allspans and mheap_.allspans, these were two ways of referring
to the spans array from when the runtime was split between C and Go.
Clean this up by making mheap_.spans a slice and eliminating h_spans.
Change-Id: I3aa7038d53c3a4252050aa33e468c48dfed0b70e
Reviewed-on: https://go-review.googlesource.com/30532
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
This was necessary in the C days when allspans was an mspan**, but now
that allspans is a Go slice, this is redundant with len(allspans) and
we can use range loops over allspans.
Change-Id: Ie1dc39611e574e29a896e01690582933f4c5be7e
Reviewed-on: https://go-review.googlesource.com/30531
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
These are two ways to refer to the allspans array that hark back to
when the runtime was split between C and Go. Clean this up by making
mheap_.allspans a slice and eliminating h_allspans.
Change-Id: Ic9360d040cf3eb590b5dfbab0b82e8ace8525610
Reviewed-on: https://go-review.googlesource.com/30530
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
When the compiler insert write barriers, the frontend makes
conservative decisions at an early stage. This may have false
positives which result in write barriers for stack writes.
A new phase, writebarrier, is added to the SSA backend, to delay
the decision and eliminate false positives. The frontend still
makes conservative decisions. When building SSA, instead of
emitting runtime calls directly, it emits WB ops (StoreWB,
MoveWB, etc.), which will be expanded to branches and runtime
calls in writebarrier phase. Writes to static locations on stack
are detected and write barriers are removed.
All write barriers of stack writes found by the script from
issue #17330 are eliminated (except two false positives).
Fixes#17330.
Change-Id: I9bd66333da9d0ceb64dcaa3c6f33502798d1a0f8
Reviewed-on: https://go-review.googlesource.com/31131
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
The runtime traceback code assumes non-empty frame has link
link register saved on LR architectures. Make sure it is so in
the assember.
Also make sure that LR is stored before update SP, so the traceback
code will not see a half-updated stack frame if a signal comes
during the execution of function prologue.
Fixes#17381.
Change-Id: I668b04501999b7f9b080275a2d1f8a57029cbbb3
Reviewed-on: https://go-review.googlesource.com/31760
Reviewed-by: Michael Munday <munday@ca.ibm.com>
Update the ppc64x disassembly code for use by objdump
from golang.org/x/arch/ppc64/ppc64asm commit fcea5ea.
Enable the objdump testcase for external linking on ppc64le
make a minor fix to the expected output.
Fixes#17447
Change-Id: I769cc7f8bfade594690a476dfe77ab33677ac03b
Reviewed-on: https://go-review.googlesource.com/32015
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For historical reasons, the go/doc package does not include
the methods within an interface as part of the documented
methods for that type. Thus,
go doc ast.Node.Pos
gives an incorrect and confusing error message:
doc: no method Node.Pos in package go/ast
This CL does some dirty work to dig down to the methods
so interface methods now present their documentation:
% go doc ast.node.pos
func Pos() token.Pos // position of first character belonging to the node
%
It must largely sidestep the doc package to do this, which
is a shame. Perhaps things will improve there one day.
The change does not handle embeddings, and in principle the
same approach could be done for struct fields, but that is also
not here yet. But this CL fixes the thing that was bugging me.
Change-Id: Ic10a91936da96f54ee0b2f4a4fe4a8c9b93a5b4a
Reviewed-on: https://go-review.googlesource.com/31852
Reviewed-by: Robert Griesemer <gri@golang.org>
Instead of generating typelink symbols in the compiler
mark types that should have typelinks with a flag.
The linker detects this flag and adds the marked types
to the typelink table.
name old s/op new s/op delta
LinkCmdCompile 0.27 ± 6% 0.25 ± 6% -6.93% (p=0.000 n=97+98)
LinkCmdGo 0.30 ± 5% 0.29 ±10% -4.22% (p=0.000 n=97+99)
name old MaxRSS new MaxRSS delta
LinkCmdCompile 112k ± 3% 106k ± 2% -4.85% (p=0.000 n=100+100)
LinkCmdGo 107k ± 3% 103k ± 3% -3.00% (p=0.000 n=100+100)
Change-Id: Ic95dd4b0101e90c1fa262c9c6c03a2028d6b3623
Reviewed-on: https://go-review.googlesource.com/31772
Run-TryBot: Shahar Kohanim <skohanim@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The condition to determine if any further iterations are needed is
evaluated to false in case it encounters a NaN. Instead, flip the
condition to keep looping until the factor is greater than the machine
roundoff error.
Updates #17577
Change-Id: I058abe73fcd49d3ae4e2f7b33020437cc8f290c3
Reviewed-on: https://go-review.googlesource.com/31952
Reviewed-by: Robert Griesemer <gri@golang.org>
In sinit.go, gdata can already handle strings and complex, so no
reason to handle them separately.
In obj.go, inline gdatastring and gdatacomplex into gdata, since it's
the only caller. Allows extracting out the common Linksym calls.
Passes toolstash -cmp.
Change-Id: I3cb18d9b4206a8a269c36e0d30a345d8e6caba1f
Reviewed-on: https://go-review.googlesource.com/31498
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Bug 15141 was apparently fixed by some other change to the
compiler (this is plausible, it was a weird bug dependent
on a particular way of returning a large named array result),
add the test to ensure that it stays fixed.
Updates #15141.
Change-Id: I3d6937556413fab1af31c5a1940e6931563ce2f3
Reviewed-on: https://go-review.googlesource.com/31972
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some original shift opcodes for ppc64x expected an operand to be
a mask instead of a shift count, preventing some valid shift counts
from being written.
This adds new opcodes for shifts where needed, using mnemonics that
match the ppc64 asm and allowing the assembler to accept the full set
of valid shift counts.
Fixes#15016
Change-Id: Id573489f852038d06def279c13fd0523736878a7
Reviewed-on: https://go-review.googlesource.com/31853
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Before go supported buildmode=shared ·f symbols used to be defined
only when they were used. In order to solve #11480 the strategy
was changed to have these symbols defined on declaration which is
less efficient and generates many unneeded symbols.
With this change the best strategy is chosen for each situation,
improving static linking time:
name old s/op new s/op delta
LinkCmdCompile 0.27 ± 5% 0.25 ± 6% -8.22% (p=0.000 n=98+96)
LinkCmdGo 0.30 ± 6% 0.29 ± 8% -5.03% (p=0.000 n=95+99)
name old MaxRSS new MaxRSS delta
LinkCmdCompile 107k ± 2% 98k ± 3% -8.32% (p=0.000 n=99+100)
LinkCmdGo 106k ± 3% 104k ± 3% -1.94% (p=0.000 n=99+100)
Change-Id: I965eeee30541e724fd363804adcd6fda10f965a4
Reviewed-on: https://go-review.googlesource.com/31031
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
In general, these functions cannot behave correctly when given a
hostname, because a hostname may represent multiple IP addresses, and
first(isIPv4) chooses at most one.
Updates #9334
Change-Id: Icfb629f84af4d976476385a3071270253c0000b1
Reviewed-on: https://go-review.googlesource.com/31931
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The old code leaves garbages in a temporary directory because it
cannot remove the current working directory on windows.
The new code changes the directory before calling os.Remove.
Furthermore, the old code assumes that ioutil.TempDir (os.TempDir)
doesn't return a relative path nor an UNC path.
If it isn't the case, the new code calls t.Fatal earlier for preventing
ambiguous errors.
Finally, the old code reassigns the variable which is used by the defer
function. It could cause unexpected results, so avoid that.
Change-Id: I5fc3902059ecaf18dc1341ecc4979d1206034cd7
Reviewed-on: https://go-review.googlesource.com/31790
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
It appears to be a vestigial holding ground for bugs.
But we have an issue tracker, and #1909 is there and open.
Change-Id: I912ff222a24c51fab483be0c67dad534f5a84488
Reviewed-on: https://go-review.googlesource.com/31859
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 31468 added TestLookupNonLDH, which was failing on Plan 9,
because LookupHost was expecting to return errNoSuchHost
on DNS resolution failure, while Plan 9 returned the
"dns failure" string.
In the Plan 9 implementation of lookupHost, we now return
errNoSuchHost instead of the "dns failure" string, so
the behavior is more consistant with other operating systems.
Fixes#17568.
Change-Id: If64f580dc0626a4a4f19e5511ba2ca5daff5f789
Reviewed-on: https://go-review.googlesource.com/31873
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
VerifyPeerCertificate returns an error if the peer should not be
trusted. It will be called after the initial handshake and before
any other verification checks on the cert or chain are performed.
This provides the callee an opportunity to augment the certificate
verification.
If VerifyPeerCertificate is not nil and returns an error,
then the handshake will fail.
Fixes#16363
Change-Id: I6a22f199f0e81b6f5d5f37c54d85ab878216bb22
Reviewed-on: https://go-review.googlesource.com/26654
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This prevents the traceback code from seeing a half-updated
stack frame when a profiling signal comes during the execution
of function prologue. Also fixes mips64x part of #17381.
Change-Id: Iec9683427e546e3648b2e8b1dde956d13f6eb938
Reviewed-on: https://go-review.googlesource.com/31721
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Since CL 30614, TestCloseError is failing on Plan 9,
because File.Write now checks f.fd == badFd before
calling syscall.Write.
The f.fd == badFd check returns os.ErrClosed, while
syscall.Write returned a syscall.ErrorString error.
TestCloseError was failing because it expected a
syscall.ErrorString error.
We add a case in parseCloseError to handle the
os.ErrClosed case.
Fixes#17569.
Change-Id: I6b4d956d18ed6d3c2ac5211ffd50a4888f7521e1
Reviewed-on: https://go-review.googlesource.com/31872
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The Gotype field is only used for ATYPE instructions. Instead of
specially storing the Go type symbol in From.Gotype, just store it in
To.Sym like any other 2-argument instruction would.
Modest reduction in allocations:
name old alloc/op new alloc/op delta
Template 42.0MB ± 0% 41.8MB ± 0% -0.40% (p=0.000 n=9+10)
Unicode 34.3MB ± 0% 34.1MB ± 0% -0.48% (p=0.000 n=9+10)
GoTypes 122MB ± 0% 122MB ± 0% -0.14% (p=0.000 n=9+10)
Compiler 518MB ± 0% 518MB ± 0% -0.04% (p=0.000 n=9+10)
Passes toolstash -cmp.
Change-Id: I0e603266b5d7d4e405106a26369e22773a0d3a91
Reviewed-on: https://go-review.googlesource.com/31850
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
\\?\c:\ is a "root directory" that is not subject to further matching,
but the ? makes it look like a pattern, which was causing an
infinite recursion. Make sure the code understands the ? is not a pattern.
Fixes#15879.
Change-Id: I3a4310bbc398bcae764b9f8859c875317345e757
Reviewed-on: https://go-review.googlesource.com/31460
Reviewed-by: Quentin Smith <quentin@golang.org>
RFC 3986 §3.3 disallows relative URL paths in which the first segment
contains a colon, presumably to avoid confusion with scheme:foo syntax,
which is exactly what happened in #16822.
Fixes#16822.
Change-Id: Ie4449e1dd21c5e56e3b126e086c3a0b05da7ff24
Reviewed-on: https://go-review.googlesource.com/31582
Reviewed-by: Quentin Smith <quentin@golang.org>
All prior versions of Go have allowed redefining empty templates
to become non-empty. Unfortunately, that has never consistently
taken effect in html/template after the first execution:
// define and execute
t := template.New("root")
t.Parse(`{{define "T"}}{{end}}<a href="{{template "T"}}">`)
t.Execute(w, nil) // <a href="">
// redefine
t.Parse(`{{define "T"}}my.url{{end}}`) // succeeds, but ignored
t.Execute(w, nil) // <a href="">
When Go 1.6 added {{block...}} to text/template, that loosened the
redefinition rules to allow redefinition at any time. The loosening was
undone a bit in html/template, although inconsistently:
// define and execute
t := template.New("root")
t.Parse(`{{define "T"}}body{{end}}`)
t.Lookup("T").Execute(ioutil.Discard, nil)
// attempt to redefine
t.Parse(`{{define "T"}}body{{end}}`) // rejected in all Go versions
t.Lookup("T").Parse("body") // OK as of Go 1.6, likely unintentionally
Like in the empty->non-empty case, whether future execution takes
notice of a redefinition basically can't be explained without going into
the details of the template escape analysis.
Address both the original inconsistencies in whether a redefinition
would have any effect and the new inconsistencies about whether a
redefinition is allowed by adopting a new rule: no parsing or modifying
any templates after the first execution of any template in the same set.
Template analysis begins at first execution, and once template analysis
has begun, we simply don't have the right logic to update the analysis
for incremental modifications (and never have).
If this new rule breaks existing uses of templates that we decide need
to be supported, we can try to invalidate all escape analysis for the
entire set after any modifications. But let's wait on that until we know
we need to and why.
Also fix documentation of text/template redefinition policy
(redefinition is always OK).
Fixes#15761.
Change-Id: I7d58d7c08a7d9df2440ee0d651a5b2ecaff3006c
Reviewed-on: https://go-review.googlesource.com/31464
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
The Go resolver reports invalid domain name for '!!!.local',
but that is allowed by multicast DNS. In general we can't predict
what future relaxations might come along, and libc resolvers
do not distinguish 'no such host' from 'invalid name', so stop
making that distinction here too. Always use 'no such host'.
Fixes#12421.
Change-Id: I8f22604767ec9e270434e483da52b337833bad71
Reviewed-on: https://go-review.googlesource.com/31468
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If a directory in GOPATH is unreadable, we should keep looking for other
packages. Otherwise we can give the misleading error "no buildable Go
source files".
Fixes#16240
Change-Id: I38e1037f56ec463d3c141f0508fb74211cb90f13
Reviewed-on: https://go-review.googlesource.com/31713
Run-TryBot: Quentin Smith <quentin@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
What matters during go get -u is not whether there is an import comment
but whether we resolved the path by an HTML <meta> tag.
Fixes#16471.
Change-Id: I6b194a3f73a7962a0170b4d5cf51cfed74e02c00
Reviewed-on: https://go-review.googlesource.com/31658
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
Maybe the go generate is generating the imports,
or maybe there's some other good reason the code
is incomplete.
The help text already says:
Note that go generate does not parse the file, so lines that look
like directives in comments or multiline strings will be treated
as directives.
We'll still reject Go source files that don't begin with a package statement
or have a syntax error in the import block, but those are I think more
defensible rejections.
Fixes#16307.
Change-Id: I4f8496c02fdff993f038adfed2df4db7f067dc06
Reviewed-on: https://go-review.googlesource.com/31659
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Currently mspan.isFree technically returns whether the object was not
allocated *during this cycle*. Fix it so it actually returns whether
or not the object is allocated so the method is more generally useful
(especially for debugging).
It has one caller, which is carefully written to be insensitive to
this distinction, but this lets us simplify this caller.
Change-Id: I9d79cf784a56015e434961733093c1d8d03fc091
Reviewed-on: https://go-review.googlesource.com/30145
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
morestack writes the context pointer to gobuf.ctxt, but since
morestack is written in assembly (and has to be very careful with
state), it does *not* invoke the requisite write barrier for this
write. Instead, we patch this up later, in newstack, where we invoke
an explicit write barrier for ctxt.
This already requires some subtle reasoning, and it's going to get a
lot hairier with the hybrid barrier.
Fix this by simplifying the whole mechanism. Instead of writing
gobuf.ctxt in morestack, just pass the value of the context register
to newstack and let it write it to gobuf.ctxt. This is a normal Go
pointer write, so it gets the normal Go write barrier. No subtle
reasoning required.
Updates #17503.
Change-Id: Ia6bf8459bfefc6828f53682ade32c02412e4db63
Reviewed-on: https://go-review.googlesource.com/31550
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This is an alternate solution to https://golang.org/cl/31445
Instead of making NewRequest return a request with Request.Body == nil
to signal a zero byte body, add a well-known variable that means
explicitly zero.
Too many tests inside Google (and presumably the outside world)
broke.
Change-Id: I78f6ecca8e8aa1e12179c234ccfb6bcf0ee29ba8
Reviewed-on: https://go-review.googlesource.com/31726
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
This makes it possible to use URLs with gob.
Ideally we'd also implement TextMarshaler and TextUnmarshaler,
but that would change the JSON encoding of a URL from something like:
{"Scheme":"https","Opaque":"","User":null,"Host":"www.google.com","Path":"/x","RawPath":"","ForceQuery":false,"RawQuery":"y=z","Fragment":""}
to something like:
"https://www.google.com/x?y=z"
That'd be nice, but it would break code expecting the old form.
Fixes#10964.
Change-Id: I83f06bc2bedd2ba8a5d8eef03ea0056d045c258f
Reviewed-on: https://go-review.googlesource.com/31467
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
According to the GNU manual, the format is:
<<<
GNU.sparse.size=size
GNU.sparse.numblocks=numblocks
repeat numblocks times
GNU.sparse.offset=offset
GNU.sparse.numbytes=numbytes
end repeat
>>>
The logic in parsePAX converts the repeating sequence of
(offset, numbytes) pairs (which is not PAX compliant) into a single
comma-delimited list of numbers (which is now PAX compliant).
Thus, we validate the following:
* The (offset, numbytes) headers must come in the correct order.
* The ',' delimiter cannot appear in the value.
We do not validate that the value is a parsible decimal since that
will be determined later.
Change-Id: I8d6681021734eb997898227ae8603efb1e17c0c8
Reviewed-on: https://go-review.googlesource.com/31439
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously, the check to make sure we only considered constant cases
for duplicates was skipping past integer ranges, because those use
n.List instead of n.Left. Thanks to Emmanuel Odeke for investigating
and helping to identify the root cause.
Fixes#17517.
Change-Id: I46fcda8ed9c346ff3a9647d50b83f1555587b740
Reviewed-on: https://go-review.googlesource.com/31716
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Updates http2 to x/net/http2 git rev 40a0a18 for:
http2: fix Server race with concurrent Read/Close
http2: make Server reuse 64k request body buffer between requests
http2: never Read from Request.Body in Transport to determine ContentLength
Fixes#17480
Updates #17071
Change-Id: If142925764a2e148f95957f559637cfc1785ad21
Reviewed-on: https://go-review.googlesource.com/31737
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
With the old code rewriting refs would rewrite the inner arguments
rather than the outer ones, leaving a reference to C.val in the outer
arguments.
Change-Id: I9b91cb4179eccd08500d14c6591bb15acf8673eb
Reviewed-on: https://go-review.googlesource.com/31672
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This commit fixes two bizarrely related bugs:
1. The signatures for the call* functions were wrong, indicating that
they had only two pointer arguments instead of three. We didn't notice
because the call* functions are defined by a macro expansion, which go
vet doesn't see.
2. deferArgs on a defer object with a zero-sized frame returned a
pointer just past the end of the allocated object, which is illegal in
Go (and can cause the "sweep increased allocation count" crashes).
In a fascinating twist, these two bugs canceled each other out, which
is why I'm fixing them together. The pointer returned by deferArgs is
used in only two ways: as an argument to memmove and as an argument to
reflectcall. memmove is NOSPLIT, so the argument was unobservable.
reflectcall immediately tail calls one of the call* functions, which
are not NOSPLIT, but the deferArgs pointer just happened to be the
third argument that was accidentally marked as a scalar. Hence, when
the garbage collector scanned the stack, it didn't see the bad
pointer as a pointer.
I believe this was all ultimately benign. In principle, stack growth
during the reflectcall could fail to update the args pointer, but it
never points to the stack, so it never needs to be updated. Also in
principle, the garbage collector could fail to mark the args object
because of the incorrect call* signatures, but in all calls to
reflectcall (including the ones spelled "call" in the reflect package)
the args object is kept live by the calling stack.
Change-Id: Ic932c79d5f4382be23118fdd9dba9688e9169e28
Reviewed-on: https://go-review.googlesource.com/31654
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
trace's reader *g is going to cause write barriers in unfortunate
places, so replace it with a guintptr.
Change-Id: Ie8fb13bb89a78238f9d2a77ec77da703e96df8af
Reviewed-on: https://go-review.googlesource.com/31469
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
There was some ambiguity over which argument was referred to when
a conversion error was returned. Now refer to the argument by
either explicit ordinal position or name if present.
Fixes#15676
Change-Id: Id933196b7e648baa664f4121fa3fb1b07b3c4880
Reviewed-on: https://go-review.googlesource.com/31262
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adapt old test for prove's bounds check elimination.
Added missing rule to generic rules that lead to differences
between 32 and 64 bit platforms on sliceopt test.
Added debugging to prove.go that was helpful-to-necessary to
discover that missing rule.
Lowered debugging level on prove.go from 3 to 1; no idea
why it was previously 3.
Change-Id: I09de206aeb2fced9f2796efe2bfd4a59927eda0c
Reviewed-on: https://go-review.googlesource.com/23290
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This makes grayModel and gray16Model in color.go use the exact same
formula as RGBToYCbCr in ycbcr.go. They were the same formula in theory,
but in practice the color.go versions used a divide by 1000 and the
ycbcr.go versions used a (presumably faster) shift by 16.
This implies the nice property that converting an image.RGBA to an
image.YCbCr and then taking only the Y channel is equivalent to
converting an image.RGBA directly to an image.Gray.
The difference between the two formulae is non-zero, but small:
https://play.golang.org/p/qG7oe-eqHI
Updates #16251
Change-Id: I288ecb957fd6eceb9626410bd1a8084d2e4f8198
Reviewed-on: https://go-review.googlesource.com/31538
Reviewed-by: Rob Pike <r@golang.org>
For very large input files, use of GOSSAFUNC to obtain a dump
after compilation steps can lead to both unwieldy large output
files and unwieldy larger processes (because the output is
buffered in a string). This flag
-d=ssa/<phase>/dump:<function name>
provides finer control of what is dumped, into a smaller
file, and with less memory overhead in the running compiler.
The special phase name "build" is added to allow printing
of the just-built ssa before any transformations are applied.
This was helpful in making sense of the gogo/protobuf
problems.
The output format was tweaked to remove gratuitous spaces,
and a crude -d=ssa/help help text was added.
Change-Id: If7516e22203420eb6ed3614f7cee44cb9260f43e
Reviewed-on: https://go-review.googlesource.com/23044
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change updates the vendored copy of x/crypto/poly1305, specifically
to include the following changes:
3ded668 poly1305: enable assembly for ARM in Go 1.6.
dec8741 poly1305: fix stack handling in sum_arm.s
Fixes#17499.
Change-Id: I8f152da9599bd15bb976f630b0ef602be05143d3
Reviewed-on: https://go-review.googlesource.com/31592
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Issues fixed:
* Could not handle quantity of seconds greater than 1<<31 on
32bit machines since strconv.ParseInt did not treat integers as 64b.
* Did not handle negative timestamps properly if nanoseconds were used.
Note that "-123.456" should result in a call to time.Unix(-123, -456000000).
* Incorrectly allowed a '-' right after the '.' (e.g., -123.-456)
* Did not detect invalid input after the truncation point (e.g., 123.123456789badbadbad).
Note that negative timestamps are allowed by PAX, but are not guaranteed
to be portable. See the relevant specification:
<<<
If pax encounters a file with a negative timestamp in copy or write mode,
it can reject the file, substitute a non-negative timestamp, or generate
a non-portable timestamp with a leading '-'.
>>>
Since the previous behavior already partially supported negative timestamps,
we are bound by Go's compatibility rules to keep support for them.
However, we should at least make sure we handle them properly.
Change-Id: I5686997708bfb59110ea7981175427290be737d1
Reviewed-on: https://go-review.googlesource.com/31441
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is a more robust method for obtaining the availability of vx.
Since this variable may be checked frequently I've also now
padded it so that it will be in its own cache line.
I've kept the other check (in hash/crc32) the same for now until
I can figure out the best way to update it.
Updates #15403.
Change-Id: I74eed651afc6f6a9c5fa3b88fa6a2b0c9ecf5875
Reviewed-on: https://go-review.googlesource.com/31149
Reviewed-by: Austin Clements <austin@google.com>
oneNewExtraM creates a spare M and G for use with cgo callbacks. The G
doesn't run right away, but goes directly into syscall status. For the
garbage collector, it's marked as "scan valid" and not on the rescan
list, but I forgot to also mark it as "scan done". As a result,
gcMarkRootCheck thinks that the goroutine hasn't been scanned and
panics.
This only affects GODEBUG=gccheckmark=1 mode, since we otherwise skip
the gcMarkRootCheck.
Fixes#17473.
Change-Id: I94f5671c42eb44bd5ea7dc68fbf85f0c19e2e52c
Reviewed-on: https://go-review.googlesource.com/31139
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Updating the heap profile stats is one of the most expensive parts of
mark termination other than stack rescanning, but there's really no
need to do this with the world stopped. Move it to right after we've
started the world back up. This creates a *very* small window where
allocations from the next cycle can slip into the profile, but the
exact point where mark termination happens is so non-deterministic
already that a slight reordering here is unimportant.
Change-Id: I2f76f22c70329923ad6a594a2c26869f0736d34e
Reviewed-on: https://go-review.googlesource.com/31363
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The only reason these flushes are still necessary at all is that
gcmarknewobject doesn't flush its gcWork stats like it's supposed to.
By changing gcmarknewobject to follow the standard protocol, the
flushes become completely unnecessary because mark 2 ensures caches
are flushed (and stay flushed) before we ever enter mark termination.
In the garbage benchmark, this takes roughly 50 µs, which is
surprisingly long for doing nothing. We still double-check after
draining that they are in fact empty.
Change-Id: Ia1c7cf98a53f72baa513792eb33eca6a0b4a7128
Reviewed-on: https://go-review.googlesource.com/31134
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The pointer checking code needs to know the exact type of the parameter
expected by the C function, so that it can use a type assertion to
convert the empty interface returned by cgoCheckPointer to the correct
type. Previously this was done by using a type conversion, but that
meant that the code accepted arguments that were convertible to the
parameter type, rather than arguments that were assignable as in a
normal function call. In other words, some code that should not have
passed type checking was accepted.
This CL changes cgo to always use a function literal for pointer
checking. Now the argument is passed to the function literal, which has
the correct argument type, so type checking is performed just as for a
function call as it should be.
Since we now always use a function literal, simplify the checking code
to run as a statement by itself. It now no longer needs to return a
value, and we no longer need a type assertion.
This does have the cost of introducing another function call into any
call to a C function that requires pointer checking, but the cost of the
additional call should be minimal compared to the cost of pointer
checking.
Fixes#16591.
Change-Id: I220165564cf69db9fd5f746532d7f977a5b2c989
Reviewed-on: https://go-review.googlesource.com/31233
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Just happened to notice that these names (funcAlign and friends) are
never referenced outside their package, so no need to export them.
Change-Id: I4bbdaa4b0ef330c3c3ef50a2ca39593977a83545
Reviewed-on: https://go-review.googlesource.com/31496
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
mkbuiltin.go now generates builtin.go using go/ast instead of running
the compiler, so we don't need the -A flag anymore.
Passes toolstash -cmp.
Change-Id: Ifa70f4f3c9feae10c723cbec81a0a47c39610090
Reviewed-on: https://go-review.googlesource.com/31497
Reviewed-by: Robert Griesemer <gri@golang.org>
Generating binary export data requires a working Go compiler. Even
trickier to change the export data format itself requires a careful
bootstrapping procedure.
Instead, simply generate normal Go code that lets us directly
construct the builtin runtime declarations.
Passes toolstash -cmp.
Fixes#17508.
Change-Id: I4f6078a3c7507ba40072580695d57c87a5604baf
Reviewed-on: https://go-review.googlesource.com/31493
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Relevant PAX specification:
<<<
If the <value> field is zero length, it shall delete any header
block field, previously entered extended header value, or
global extended header value of the same name.
>>>
We don't delete global extender headers since the Reader doesn't
even support global headers (which the specification admits was
a controversial feature).
Change-Id: I2125a5c907b23a3dc439507ca90fa5dc47d474a9
Reviewed-on: https://go-review.googlesource.com/31440
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Took this opportunity to also embed tables in the functions
that they are actually used in and other stylistic cleanups.
There was no logical changes to the tests.
Change-Id: Ifa724060532175f6f4407d6cedc841891efd8f7b
Reviewed-on: https://go-review.googlesource.com/31436
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Add support for passing reflect.Values to and returning reflect.Values from
any registered functions in the FuncMap, much as if they were
interface{} values. Keeping the reflect.Value instead of round-tripping
to interface{} preserves addressability of the value, which is important
for method lookup.
Change index and a few other built-in functions to use reflect.Values,
making a loop using explicit indexing now match the semantics that
range has always had.
Fixes#14916.
Change-Id: Iae1a2fd9bb426886a7fcd9204f30a2d6ad4646ad
Reviewed-on: https://go-review.googlesource.com/31462
Reviewed-by: Rob Pike <r@golang.org>
The GNU format does not have a prefix field, so we should make
no attempt to read it. It does however have atime and ctime fields.
Since Go previously placed incorrect values here, we liberally
read the atime and ctime fields and ignore errors so that old tar
files written by Go can at least be partially read.
This fixes half of #12594. The Writer is much harder to fix.
Updates #12594
Change-Id: Ia32845e2f262ee53366cf41dfa935f4d770c7a30
Reviewed-on: https://go-review.googlesource.com/31444
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The panic leaves the lock in an unusable state.
Trying to panic with a usable state makes the lock significantly
less efficient and scalable (see early CL patch sets and discussion).
Instead, use runtime.throw, which will crash the program directly.
In general throw is reserved for when the runtime detects truly
serious, unrecoverable problems. This problem is certainly serious,
and, without a significant performance hit, is unrecoverable.
Fixes#13879.
Change-Id: I41920d9e2317270c6f909957d195bd8b68177f8d
Reviewed-on: https://go-review.googlesource.com/31359
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Before: ... appears in an ambiguous URL context.
After: ... appears in an ambiguous context within a URL.
It's a minor point, but it's confused multiple people.
Try to make clearer that the ambiguity is "where exactly inside the URL?"
Fixes#17319.
Change-Id: Id834868d1275578036c1b00c2bdfcd733d9d2b7b
Reviewed-on: https://go-review.googlesource.com/31465
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL makes NewRequest set Body nil for known-zero bodies, and makes
the http1 Transport not peek-Read a byte to determine whether there's
a body.
Background:
Many fields of the Request struct have different meanings for whether
they're outgoing (via the Transport) or incoming (via the Server).
For outgoing requests, ContentLength and Body are documented as:
// Body is the request's body.
//
// For client requests a nil body means the request has no
// body, such as a GET request. The HTTP Client's Transport
// is responsible for calling the Close method.
Body io.ReadCloser
// ContentLength records the length of the associated content.
// The value -1 indicates that the length is unknown.
// Values >= 0 indicate that the given number of bytes may
// be read from Body.
// For client requests, a value of 0 with a non-nil Body is
// also treated as unknown.
ContentLength int64
Because of the ambiguity of what ContentLength==0 means, the http1 and
http2 Transports previously Read the first byte of a non-nil Body when
the ContentLength was 0 to determine whether there was an actual body
(with a non-zero length) and ContentLength just wasn't populated, or
it was actually empty.
That byte-sniff has been problematic and gross (see #17480, #17071)
and was removed for http2 in a previous commit.
That means, however, that users doing:
req, _ := http.NewRequest("POST", url, strings.NewReader(""))
... would not send a Content-Length header in their http2 request,
because the size of the reader (even though it was known, being one of
the three common recognized types from NewRequest) was zero, and so
the HTTP Transport thought it was simply unset.
To signal explicitly-zero vs unset-zero, this CL changes NewRequest to
signal explicitly-zero by setting the Body to nil, instead of the
strings.NewReader("") or other zero-byte reader.
This CL also removes the byte sniff from the http1 Transport, like
https://golang.org/cl/31326 did for http2.
Updates #17480
Updates #17071
Change-Id: I329f02f124659bf7d8bc01e2c9951ebdd236b52a
Reviewed-on: https://go-review.googlesource.com/31445
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Make two important points clearer:
- Giving a template definition containing
nothing but spaces has no effect.
- Giving a template definition containing
non-spaces can only be done once per template.
Fixes#16912.
Fixes#16913.
Fixes#17360.
Change-Id: Ie3971b83ab148b7c8bb800fe4a21579566378e3e
Reviewed-on: https://go-review.googlesource.com/31459
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Implements Float.Scan which satisfies fmt.Scanner interface.
Also enforces docs' interface implementation claims with compile time
type assertions, that is:
+ Float always implements fmt.Formatter and fmt.Scanner
+ Int always implements fmt.Formatter and fmt.Scanner
+ Rat always implements fmt.Formatter
which will ensure that the API claims are strictly matched.
Also note that Float.Scan doesn't handle ±Inf.
Fixes#17391
Change-Id: I3d3dfbe7f602066975c7a7794fe25b4c645440ce
Reviewed-on: https://go-review.googlesource.com/30723
Reviewed-by: Robert Griesemer <gri@golang.org>
For example, testing the current directory:
$ go test -run XXX
testing: warning: no tests to run
PASS
ok testing 0.013s
$
And in a summary:
$ go test -run XXX testing
ok testing 0.013s [no tests to run]
$
These make it easy to spot when the -run regexp hasn't matched anything
or there are no tests. Previously the message was printed in the "current directory"
case when there were no tests at all, but not for no matches, and either way
was not surfaced in the directory list summary form.
Fixes#15211.
Change-Id: I1c82a423d6bd429fb991c9ca964c9d26c96fd3c5
Reviewed-on: https://go-review.googlesource.com/22341
Reviewed-by: Marcel van Lohuizen <mpvl@golang.org>
Current implementation of syscall.Readlink mistakenly calculates
the end offset of the PrintName field.
Also, there are some cases that the PrintName field is empty.
Instead, the CL uses SubstituteName with correct calculation.
Fixes#15978Fixes#16145
Change-Id: If3257137141129ac1c552d003726d5b9c08bb754
Reviewed-on: https://go-review.googlesource.com/31118
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Unix rejects this when new is a non-empty directory.
Other systems reject this when new is a directory, empty or not.
Make Unix reject empty directory too.
Fixes#14527.
Change-Id: Ice24b8065264c91c22cba24aa73e142386c29c87
Reviewed-on: https://go-review.googlesource.com/31358
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A 16bit binary exponent permits a constant range covering roughly the range
from 7e-9865 to 7e9863 which is more than enough for any practical and
hypothetical constant arithmetic.
Furthermore, until recently cmd/compile could not handle very large exponents
correctly anyway; i.e., the chance that any real programs (but for tests that
explore corner cases) are affected are close to zero.
Finally, restricting the minimum supported range significantly reduces the
implementation complexity in an area that hardly matters in reality for new
or alternative spec-compliant implementations that don't or cannot rely on
pre-existing arbitratry precision arithmetic packages that support a 32bit
exponent range.
This is technically a language change but for the reasons mentioned above
this is unlikely to affect any real programs, and certainly not programs
compiled with the gc or gccgo compilers as they currently support up to
32bit exponents.
Fixes#13572.
Change-Id: I970f919c57fc82c0175844364cf48ea335f17d39
Reviewed-on: https://go-review.googlesource.com/17711
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reuse the same mechanisms for handling universal builtins like len to
handle unsafe.Sizeof, etc. Allows us to drop package unsafe's export
data, and simplifies some code.
Updates #17508.
Change-Id: I620e0617c24e57e8a2d7cccd0e2de34608779656
Reviewed-on: https://go-review.googlesource.com/31433
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Add special case for Gamma(+∞) which speeds it up:
benchmark old ns/op new ns/op delta
BenchmarkGamma-4 14.5 7.44 -48.69%
The documentation for math.Gamma already specifies it as a special
case:
Gamma(+Inf) = +Inf
The original C code that has been used as the reference implementation
(as mentioned in the comments in gamma.go) also treats Gamma(+∞) as a
special case:
if( x == INFINITY )
return(x);
Change-Id: Idac36e19192b440475aec0796faa2d2c7f8abe0b
Reviewed-on: https://go-review.googlesource.com/31370
Reviewed-by: Robert Griesemer <gri@golang.org>
The way to send an explicitly-zero Content-Length is to set a nil Body.
Fix this test to do that, rather than relying on type sniffing.
Updates #17480
Updates #17071
Change-Id: I6a38e20f17013c88ec4ea69d73c507e4ed886947
Reviewed-on: https://go-review.googlesource.com/31434
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
"go env" previously only printed a subset of the documented environment
variables; now it includes everything, such as GO386 and CGO_*.
This also fixes the CGO_CFLAGS environment variable to always have the
same default. According to iant@ and confirmed by testing, cgo can now
understand the default value of CGO_CFLAGS.
Fixes#17191.
Change-Id: Icf75055446dd250b6256ef1139e9ce848f4a9d3b
Reviewed-on: https://go-review.googlesource.com/31330
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Quentin Smith <quentin@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
instrumentnode() accidentally copies parent's already-instrumented nodes
into child's Ninit block. This generates repeated code in race-instrumentation.
This case surfaces only when it duplicates inline-labels, because of
compile time error. In other cases, it silently generates incorrect
instrumented code. This change prevents it from doing so.
Fixes#17449.
Change-Id: Icddf2198990442166307e176b7e20aa0cf6c171c
Reviewed-on: https://go-review.googlesource.com/31317
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Interface methods can't have function bodies, so there's no need to
process their parameter lists as variable declarations. The only
possible reason would be to check for duplicate parameter names and/or
invalid types, but we do that anyway, and have regression tests for it
(test/funcdup.go).
Change-Id: Iedb15335467caa5d872dbab829bf32ab8cf6204d
Reviewed-on: https://go-review.googlesource.com/31430
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change omits the stack check on ppc64 and s390x when the size of
a stack frame is less than obj.StackSmall. This is an optimization
x86 already performs.
The effect on s390x isn't huge because we were already omitting the
stack check when the frame size was 0 (it shaves about 1K from the
size of bin/go). On ppc64 however this change reduces the size of the
.text section in bin/go by 33K (1%).
Updates #13379 (for ppc64).
Change-Id: I6af0eb987646bea47fcaf0a812db3496bab0f680
Reviewed-on: https://go-review.googlesource.com/31357
Reviewed-by: David Chase <drchase@google.com>
Previously, in acceptPlan9 we set netFD.ctl to the listener's
/net/tcp/*/listen file instead of the accepted connection's
/net/tcp/*/ctl file.
In netFD.Read, we write "close" to netFD.ctl to close the
connection and wake up the readers. However, in the
case of an accepted connection, we got the error
"write /net/tcp/*/listen: inappropriate use of fd"
because the /net/tcp/*/listen doesn't handle the "close" message.
In this case, the connection wasn't closed and the readers
weren't awake.
We modified the netFD structure so that netFD.ctl represents
the accepted connection and netFD.listen represents the
listener.
Change-Id: Ie38c7dbaeaf77fe9ff7da293f09e86d1a01b3e1e
Reviewed-on: https://go-review.googlesource.com/31390
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
- Like ",any" for elements, add ",any,attr" for attributes to allow
a mop-up field that gets any otherwise unmapped attributes.
- Map attributes to fields of type slice by extending the slice,
just like for elements.
- Allow storing an attribute into an xml.Attr directly, to provide
a way to record the name.
Combined, these three independent features allow
AllAttrs []Attr `xml:",any,attr"`
to collect all attributes not otherwise spoken for in a particular struct.
Tests based on CL 16292 by Charles Weill.
Fixes#3633.
Change-Id: I2d75817f17ca8752d7df188080a407836af92611
Reviewed-on: https://go-review.googlesource.com/30946
Reviewed-by: Quentin Smith <quentin@golang.org>
Previously, we used to write the "hangup" message to
the TCP connection control file to be able to close
a connection, while waking up the readers.
The "hangup" message closes the TCP connection with a
RST message. This is a problem when closing a connection
consecutively to a write, because the reader may not have
time to acknowledge the message before the connection is
closed, resulting in loss of data.
We use a "close" message, newly implemented in the Plan 9
kernel to be able to close a TCP connection gracefully with a FIN.
Updates #15464.
Change-Id: I2050cc72fdf7a350bc6c9128bae7d14af11e599c
Reviewed-on: https://go-review.googlesource.com/31271
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The comments added for Go 1.7 are very close.
Make explicit that they only apply if the timer is
not known to have expired already.
Fixes#14038.
Change-Id: I6a38be7b2015e1571fc477e18444a8cee38aab29
Reviewed-on: https://go-review.googlesource.com/31350
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
cmd.StdinPipe returns an io.WriteCloser.
It's reasonable to expect the caller not to call Write and Close simultaneously,
but there is an implicit Close in cmd.Wait that's not obvious.
We already synchronize the implicit Close in cmd.Wait against
any explicit Close from the caller. Also synchronize that implicit
Close against any explicit Write from the caller.
Fixes#9307.
Change-Id: I8561e9369d6e5ac88dfbca1175549f6dfa04b8ac
Reviewed-on: https://go-review.googlesource.com/31148
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In the zero Time, the (not user visible) nil *Location indicates UTC.
In the result of t.UTC() and other ways to create times in specific
zones, UTC is indicated by a non-nil *Location, specifically &utcLoc.
This creates a representation ambiguity exposed by comparison with ==
or reflect.DeepEqual or the like.
Change time.Time representation to use only nil, never &utcLoc,
to represent UTC. This eliminates the ambiguity.
Fixes#15716.
Change-Id: I7dcc2c20ce6b073e1daae323d3e49d17d1d52802
Reviewed-on: https://go-review.googlesource.com/31144
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change documents that the InterfaceAddrs function is less usable on
multi-homed IP nodes because of the lack of network interface
identification information.
Also updates documentation on exposed network interface API.
Fixes#14518.
Change-Id: I5e86606f8019ab475eb5d385bd797b052cba395d
Reviewed-on: https://go-review.googlesource.com/31371
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Check for and call the special printing and format methods such as String
at printing depth 0 when printing the concrete value of a reflect.Value.
Fixes: #16015
Change-Id: I23bd2927255b60924e5558321e98dd4a95e11c4c
Reviewed-on: https://go-review.googlesource.com/30753
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL changes how the http1 Server reads from the client.
The goal of this change is to make the Request.Context given to Server
Handlers become done when the TCP connection dies (has seen any read
or write error). I didn't finish that for Go 1.7 when Context was
added to http package.
We can't notice the peer disconnect unless we're blocked in a Read
call, though, and previously we were only doing read calls as needed,
when reading the body or the next request. One exception to that was
the old pre-context CloseNotifier mechanism.
The implementation of CloseNotifier has always been tricky. The past
few releases have contained the complexity and moved the
reading-from-TCP-conn logic into the "connReader" type. This CL
extends connReader to make sure that it's always blocked in a Read
call, at least once the request body has been fully consumed.
In the process, this deletes all the old CloseNotify code and unifies
it with the context cancelation code. The two notification mechanisms
are nearly identical, except the CloseNotify path always notifies on
the arrival of pipelined HTTP/1 requests. We might want to change that
in a subsequent commit. I left a TODO for that. For now there's no
change in behavior except that the context now cancels as it was
supposed to.
As a bonus that fell out for free, a Handler can now use CloseNotifier
and Hijack together in the same request now.
Fixes#15224 (make http1 Server always in a Read, like http2)
Fixes#15927 (cancel context when underlying connection closes)
Updates #9763 (CloseNotifier + Hijack)
Change-Id: I972cf6ecbab7f1230efe8cc971e89f8e6e56196b
Reviewed-on: https://go-review.googlesource.com/31173
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change enables the ChaCha20-Poly1305 cipher suites by default. This
changes the default ClientHello and thus requires updating all the
tests.
Change-Id: I6683a2647caaff4a11f9e932babb6f07912cad94
Reviewed-on: https://go-review.googlesource.com/30958
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In addition to the DecimalConversion benchmark, that exercises the
String method of the internal decimal type on a range of small shifts,
add a few benchmarks for the big.Float String method. They can be used
to obtain more realistic data on the real-world performance of
big.Float printing.
Change-Id: I7ada324e7603cb1ce7492ccaf3382db0096223ba
Reviewed-on: https://go-review.googlesource.com/31275
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This will cause godoc to correctly render these docs,
since go/doc.ToHTML requires no punctuation for headings.
Change-Id: Ic95245147d3585f2ccc59d4424fcab17d2a5617b
Reviewed-on: https://go-review.googlesource.com/31319
Reviewed-by: Rob Pike <r@golang.org>
The comments about pcln functions are obsolete since those functions
now live in cmd/internal/obj. The copyright header is redundant with
the existing one at the top of the file.
Change-Id: I568fd3d259253a0d8eb3b0a157d008df1b5de106
Reviewed-on: https://go-review.googlesource.com/31315
Reviewed-by: Ian Lance Taylor <iant@golang.org>
all.bash passes with -debugtramp=2 (except the unavoidable
disassembly test as we change instructions). And successfully
build k8s.io/kubernetes/cmd/hyperkube in both internal linking
and external linking mode.
Fixes#17028.
Change-Id: Ic8fac6a394488155c5eba9215662db1c1086e24b
Reviewed-on: https://go-review.googlesource.com/31143
Reviewed-by: David Chase <drchase@google.com>
Although an AEAD, in general, can be used concurrently in both the seal
and open directions, TLS is easier. Since the transport keys are
different for different directions in TLS, an AEAD will only ever be
used in one direction. Thus we don't need separate buffers for seal and
open because they can never happen concurrently.
Also, fix the nonce size to twelve bytes since the fixed-prefix
construction for AEADs is superseded and will never be used for anything
else now.
Change-Id: Ibbf6c6b1da0e639f4ee0e3604410945dc7dcbb46
Reviewed-on: https://go-review.googlesource.com/30959
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change updates the vendored chacha20poly1305 package to match
revision 14f9af67c679edd414f72f13d67c917447113df2 of x/crypto.
Change-Id: I05a4ba86578b0f0cdb1ed7dd50fee3b38bb48cf5
Reviewed-on: https://go-review.googlesource.com/31312
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is needed for some of the more complex primality tests
(to filter out exact squares), and while the code is simple the
boundary conditions are not obvious, so it seems worth having
in the library.
Change-Id: Ica994a6b6c1e412a6f6d9c3cf823f9b653c6bcbd
Reviewed-on: https://go-review.googlesource.com/30706
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Correcting a line in asm_ppc64x.s in the cmpbodyLE function
that originally was R14 but accidentally changed to R4.
Fixes#17488
Change-Id: Id4ca6fb2e0cd81251557a0627e17b5e734c39e01
Reviewed-on: https://go-review.googlesource.com/31266
Reviewed-by: Michael Munday <munday@ca.ibm.com>
Run-TryBot: Michael Munday <munday@ca.ibm.com>
Adds the new canMergeLoad function which can be used by rules to
decide whether a load can be merged into an operation. The function
ensures that the merge will not reorder the load relative to memory
operations (for example, stores) in such a way that the block can no
longer be scheduled.
This new function enables transformations such as:
MOVD 0(R1), R2
ADD R2, R3
to:
ADD 0(R1), R3
The two-operand form of the following instructions can now read a
single memory operand:
- ADD
- ADDC
- ADDW
- MULLD
- MULLW
- SUB
- SUBC
- SUBE
- SUBW
- AND
- ANDW
- OR
- ORW
- XOR
- XORW
Improves SHA3 performance by 6-8%.
Updates #15054.
Change-Id: Ibcb9122126cd1a26f2c01c0dfdbb42fe5e7b5b94
Reviewed-on: https://go-review.googlesource.com/29272
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Inspired by Alberto Donizetti's observations in
https://go-review.googlesource.com/#/c/30099/.
name old time/op new time/op delta
DecimalConversion-8 138µs ± 1% 136µs ± 2% -1.85% (p=0.000 n=10+10)
10 runs each, measured on a Mac Mini, 2.3 GHz Intel Core i7.
Performance improvements varied between -1.25% to -4.4%; -1.85% is
about in the middle of the observed improvement. The generated code
is slightly shorter in the inner loops of the conversion code.
Change-Id: I10fb3b2843da527691c39ad5e5e5bd37ed63e2fa
Reviewed-on: https://go-review.googlesource.com/31250
Reviewed-by: Alan Donovan <adonovan@google.com>
GC assists retry if preempted or if they fail to park. However, on the
retry path they currently use stale statistics. In particular, the
retry can use "debtBytes", but debtBytes isn't updated when the debt
changes (since other than retries it is only used once). Also, though
less of a problem, the if the assist ratio has changed while the
assist was blocked, the retry will still use the old assist ratio.
Fix all of this by simply making the retry jump back to where we
compute these statistics, rather than just after.
Change-Id: I2ed8b4f0fc9f008ff060aa926f4334b662ac7d3f
Reviewed-on: https://go-review.googlesource.com/30701
Reviewed-by: Rick Hudson <rlh@golang.org>
This puts all of the assist queue-related code together and makes it
easier to modify how the assist queue works.
Change-Id: Id54e06702bdd5a5dd3fef2ce2c14cd7ca215303c
Reviewed-on: https://go-review.googlesource.com/30700
Reviewed-by: Rick Hudson <rlh@golang.org>
It's pretty simple. For:
e = (interface{})(i)
Do:
tmp = i.itab
if tmp != nil {
tmp = tmp.typ_ // load type from itab
}
e = eface{tmp, i.data}
It is smaller and faster than calling the runtime.
Change-Id: I0ad27f62f4ec0b6cd53bc8530e4da0eae3e67a6c
Reviewed-on: https://go-review.googlesource.com/31260
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
getArgInfo for reflect.makeFuncStub and reflect.methodValueCall is
necessarily special. These have dynamically determined argument maps
that are stored in their context (that is, their *funcval). These
functions are written to store this context at 0(SP) when called, and
getArgInfo retrieves it from there.
This technique works if getArgInfo is passed an active call frame for
one of these functions. However, getArgInfo is also used in
tracebackdefers, where the "call" is not a true call with an active
stack frame, but a deferred call. In this situation, getArgInfo
currently crashes because tracebackdefers passes a frame with sp set
to 0. However, the entire approach used by getArgInfo is flawed in
this situation because the wrapper has not actually executed, and
hence hasn't saved this metadata to any stack frame.
In the defer case, we know the *funcval from the _defer itself, so we
can fix this by teaching getArgInfo to use the *funcval context
directly when its available, and otherwise get it from the active call
frame.
While we're here, this commit simplifies getArgInfo a bit by making it
play more nicely with the type system. Rather than decoding the
*reflect.methodValue that is the wrapper's context as a *[2]uintptr,
just write out a copy of the reflect.methodValue type in the runtime.
Fixes#16331. Fixes#17471.
Change-Id: I81db4d985179b4a81c68c490cceeccbfc675456a
Reviewed-on: https://go-review.googlesource.com/31138
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
If morestack runs on the g0 or gsignal stack, it currently performs
some abort operation that typically produces a signal (e.g., it does
an INT $3 on x86). This is useful if you're running in a debugger, but
if you're not, the runtime tries to trap this signal, which is likely
to send the program into a deeper spiral of collapse and lead to very
confusing diagnostic output.
Help out people trying to debug without a debugger by making morestack
print an informative message before blowing up.
Change-Id: I2814c64509b137bfe20a00091d8551d18c2c4749
Reviewed-on: https://go-review.googlesource.com/31133
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Per discussion on #12808, it's a bit odd that if you do
CGO_ENABLED=0 ./make.bash
then you get a toolchain that still tries to use cgo.
So make the CGO_ENABLED setting propagate into
the resulting toolchain as the default setting for that
environment variable, like we do with other variables
like CC and GOROOT.
No reasonable way to test automatically, but I did
test by hand that after the above command, 'go env'
shows CGO_ENABLED=0; before it showed CGO_ENABLED=1.
Fixes#12808.
Change-Id: I26a2fa6cc00e73bde8af7469270b27293392ed71
Reviewed-on: https://go-review.googlesource.com/31141
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This improves the performance for byte.Compare by rewriting
the cmpbody function in runtime/asm_ppc64x.s. The previous code
had a simple loop which loaded a pair of bytes and compared them,
which is inefficient for long buffers. The updated function checks
for 8 or 32 byte chunks and then loads and compares double words where
possible.
Because the byte.Compare result indicates greater or less than,
the doubleword loads must take endianness into account, using a
byte reversed load in the little endian case.
Fixes#17433
benchmark old ns/op new ns/op delta
BenchmarkBytesCompare/8-16 13.6 7.16 -47.35%
BenchmarkBytesCompare/16-16 25.7 7.83 -69.53%
BenchmarkBytesCompare/32-16 38.1 7.78 -79.58%
BenchmarkBytesCompare/64-16 63.0 10.6 -83.17%
BenchmarkBytesCompare/128-16 112 13.0 -88.39%
BenchmarkBytesCompare/256-16 211 28.1 -86.68%
BenchmarkBytesCompare/512-16 410 38.6 -90.59%
BenchmarkBytesCompare/1024-16 807 60.2 -92.54%
BenchmarkBytesCompare/2048-16 1601 103 -93.57%
Change-Id: I121acc74fcd27c430797647b8d682eb0607c63eb
Reviewed-on: https://go-review.googlesource.com/30949
Reviewed-by: David Chase <drchase@google.com>
To match the language spec, strconv.Unquote needs to strip carriage
returns from the raw string.
Also fixes TestUnquote to not be a noop.
Fixes#15997
Change-Id: I2456f50f2ad3830f37e545f4f6774ced9fe609d7
Reviewed-on: https://go-review.googlesource.com/31210
Reviewed-by: Robert Griesemer <gri@golang.org>
The assembly in math/big may contain instructions that the bootstrap
compiler does not support. Disable it using the math_big_pure_go
build tag.
Fixes#17484.
Change-Id: I766cab6a888721ab4ed76ebdbfc87ad4e919ec41
Reviewed-on: https://go-review.googlesource.com/31142
Run-TryBot: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The relevant benchmark (on an Intel i7-4510U machine):
name old time/op new time/op delta
FormatFloat/Slowpath64-4 68.6µs ± 0% 44.1µs ± 2% -35.71% (p=0.000 n=13+15)
Change-Id: I67eb0e81ce74ed57752d0280059f91419f09e93b
Reviewed-on: https://go-review.googlesource.com/30099
Reviewed-by: Robert Griesemer <gri@golang.org>
This change imports the chacha20poly1305 and poly1305 packages from
x/crypto at 5f4e837b98443e9e7a65072235205993af565d85. These packages
will be used to support the ChaCha20-Poly1305 AEAD in crypto/tls.
Change-Id: I1a38d671ef9aeff3bc41e3924655883d465a5617
Reviewed-on: https://go-review.googlesource.com/30956
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Sometimes .git is a plain file; maybe others will follow.
This CL matches CL 21430, made in x/tools/go/vcs.
The change in the Swift test case makes the test case
pass by changing the test to match current behavior,
which I assume is better than the reverse.
(The test only runs locally and without -short, so the
builders are not seeing this particular failure.)
For #10322.
Change-Id: Iccd08819a01c5609a2880b9d8a99af936e20faff
Reviewed-on: https://go-review.googlesource.com/30948
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change adds support for trampolines on ppc64x when using
internal linking, in the case where the offset to the branch
target is larger than what fits in the field provided by the
branch instruction.
Fixes#16665
Change-Id: Icfee72910f38c94588d2adce517b64dee6176145
Reviewed-on: https://go-review.googlesource.com/30850
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The driver.Valuer interface lets types map their Go representation to
a suitable database/sql/driver.Value.
If a user defines the Value method with a value receiver, such as:
type MyStr string
func (s MyStr) Value() (driver.Value, error) {
return strings.ToUpper(string(s)), nil
}
Then they can't use (*MyStr)(nil) as an argument to an SQL call via
database/sql, because *MyStr also implements driver.Value, but via a
compiler-generated wrapper which checks whether the pointer is nil and
panics if so.
We now accept (*MyStr)(nil) and map it to "nil" (an SQL "NULL")
if the Valuer method is implemented on MyStr instead of *MyStr.
If a user implements the driver.Value interface with a pointer
receiver, they retain full control of what nil means:
type MyStr string
func (s *MyStr) Value() (driver.Value, error) {
if s == nil {
return "missing MyStr", nil
}
return strings.ToUpper(string(*s)), nil
}
Adds tests for both cases.
Fixes#8415
Change-Id: I897d609d80d46e2354d2669a8a3e090688eee3ad
Reviewed-on: https://go-review.googlesource.com/31259
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Theophanes <kardianos@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This allows use of newer math/big (and later debug/pe)
without maintaining a vendored copy somewhere in cmd.
Use for math/big, deleting cmd/compile/internal/big.
Change-Id: I2bffa7a9ef115015be29fafdb02acc3e7a665d11
Reviewed-on: https://go-review.googlesource.com/31010
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
1. Define behavior for Unmarshal of JSON null into Unmarshaler and
TextUnmarshaler. Specifically, an Unmarshaler will be given the
literal null and can decide what to do (because otherwise
json.RawMessage is impossible to implement), and a TextUnmarshaler
will be skipped over (because there is no text to unmarshal), like
most other inappropriate types. Document this in Unmarshal, with a
reminder in UnmarshalJSON about handling null.
2. Test all this.
3. Fix the TextUnmarshaler case, which was returning an unmarshalling
error, to match the definition.
4. Fix the error that had been used for the TextUnmarshaler, since it
was claiming that there was a JSON string when in fact the problem was
NOT having a string.
5. Adjust time.Time and big.Int's UnmarshalJSON to ignore null, as is
conventional.
Fixes#9037.
Change-Id: If78350414eb8dda712867dc8f4ca35a9db041b0c
Reviewed-on: https://go-review.googlesource.com/30944
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The CloseWrite method sends a close_notify alert record to the other
side of the connection. This record indicates that the sender has
finished sending on the connection. Unlike the Close method, the sender
may still read from the connection until it recieves a close_notify
record (or the underlying connection is closed). This is analogous to a
TCP half-close.
Updates #8579
Change-Id: I9c6bc193efcb25cc187f7735ee07170afa7fdde3
Reviewed-on: https://go-review.googlesource.com/25159
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Copies utf8 constants and EncodeRune implementation from unicode/utf8.
Adds a new decoderune implementation that is used by the compiler
in code generated for ranging over strings. It does not handle
ASCII runes since these are handled directly before calls to decoderune.
The DecodeRuneInString implementation from unicode/utf8 is not used
since it uses a lookup table that would increase the use of cpu caches.
Adds more tests that check decoding of valid and invalid utf8 sequences.
name old time/op new time/op delta
RuneIterate/range2/ASCII-4 7.45ns ± 2% 7.45ns ± 1% ~ (p=0.634 n=16+16)
RuneIterate/range2/Japanese-4 53.5ns ± 1% 49.2ns ± 2% -8.03% (p=0.000 n=20+20)
RuneIterate/range2/MixedLength-4 46.3ns ± 1% 41.0ns ± 2% -11.57% (p=0.000 n=20+20)
new:
"".decoderune t=1 size=423 args=0x28 locals=0x0
old:
"".charntorune t=1 size=666 args=0x28 locals=0x0
Change-Id: I1df1fdb385bb9ea5e5e71b8818ea2bf5ce62de52
Reviewed-on: https://go-review.googlesource.com/28490
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The incorrect table was used for estimating output size.
This can give suboptimal selection of entropy encoder in rare cases.
Change-Id: I8b358200f2d1f9a3f9b79a44269d7be704e1d2d9
Reviewed-on: https://go-review.googlesource.com/31172
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Modify the new Context methods to take a name-value driver struct.
This will require more modifications to drivers to use, but will
reduce the overall number of structures that need to be maintained
over time.
Fixes#12381
Change-Id: I30747533ce418a1be5991a0c8767a26e8451adbd
Reviewed-on: https://go-review.googlesource.com/30166
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In ReadRune store the size of the rune that was read into lastRead
to avoid the need to call DecodeRuneLast in UnreadRune.
fmt:
name old time/op new time/op delta
ScanInts-4 481µs ± 4% 458µs ± 3% -4.64% (p=0.000 n=20+20)
Change-Id: I500848e663a975f426402a4b3d27a541e5cac06c
Reviewed-on: https://go-review.googlesource.com/28817
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Flesh out nacl's fake network system to match how all the other
platforms work: all other systems' SetReadDeadline and
SetWriteDeadline affect currently-blocked read & write calls.
This was documented in golang.org/cl/30164 because it was the status
quo and existing packages relied on it. (notably the net/http package)
And add a test.
Change-Id: I074a1054dcabcedc97b173dad5e827f8babf7cfc
Reviewed-on: https://go-review.googlesource.com/31178
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Template.escape makes the assumption that t.Lookup(t.Name()) is t
(escapeTemplate looks up the associated template by name and sets
escapeErr appropriately).
This assumption did not hold for a Cloned template, because the template
associated with t.Name() was a second copy of the original.
Add a test for the assumption that t.Lookup(t.Name()) == t.
One effect of this broken assumption was #16101: parallel Executes
racily accessed the template namespace because each Execute call saw
t.escapeErr == nil and re-escaped the template concurrently with read
accesses occurring outside the namespace mutex.
Add a test for this race.
Related to #12996 and CL 16104.
Fixes#16101
Change-Id: I59831d0847abbabb4ef9135f2912c6ce982f9837
Reviewed-on: https://go-review.googlesource.com/31092
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The error check patterns in this test are more complex than necessary
because f2 gets inlined into f1. This behavior isn't important to the
test, so disable inlining of f2 and simplify the error check patterns.
Change-Id: Ia8aee92a52f9217ad71b89b2931494047e8d2185
Reviewed-on: https://go-review.googlesource.com/31132
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently we use go:nowritebarrier in many places in proc.go.
go:notinheap and go:yeswritebarrierrec now let us use
go:nowritebarrierrec (the recursive form of the go:nowritebarrier
pragma) more liberally. Do so in proc.go
Change-Id: Ia7fcbc12ce6c51cb24730bf835fb7634ad53462f
Reviewed-on: https://go-review.googlesource.com/30942
Reviewed-by: Rick Hudson <rlh@golang.org>
This covers basically all sysAlloc'd, persistentalloc'd, and
fixalloc'd types.
Change-Id: I0487c887c2a0ade5e33d4c4c12d837e97468e66b
Reviewed-on: https://go-review.googlesource.com/30941
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently mspan links to its previous mspan using a **mspan field that
points to the previous span's next field. This simplifies some of the
list manipulation code, but is going to make it very hard to convince
the compiler that mspan list manipulations don't need write barriers.
Fix this by using a more traditional ("boring") linked list that uses
a simple *mspan pointer to the previous mspan. This complicates some
of the list manipulation slightly, but it will let us eliminate all
write barriers from the mspan list manipulation code by marking mspan
go:notinheap.
Change-Id: I0d0b212db5f20002435d2a0ed2efc8aa0364b905
Reviewed-on: https://go-review.googlesource.com/30940
Reviewed-by: Rick Hudson <rlh@golang.org>
This adds a //go:notinheap pragma for declarations of types that must
not be heap allocated. We ensure these rules by disallowing new(T),
make([]T), append([]T), or implicit allocation of T, by disallowing
conversions to notinheap types, and by propagating notinheap to any
struct or array that contains notinheap elements.
The utility of this pragma is that we can eliminate write barriers for
writes to pointers to go:notinheap types, since the write barrier is
guaranteed to be a no-op. This will let us mark several scheduler and
memory allocator structures as go:notinheap, which will let us
disallow write barriers in the scheduler and memory allocator much
more thoroughly and also eliminate some problematic hybrid write
barriers.
This also makes go:nowritebarrierrec and go:yeswritebarrierrec much
more powerful. Currently we use go:nowritebarrier all over the place,
but it's almost never what you actually want: when write barriers are
illegal, they're typically illegal for a whole dynamic scope. Partly
this is because go:nowritebarrier has been around longer, but it's
also because go:nowritebarrierrec couldn't be used in situations that
had no-op write barriers or where some nested scope did allow write
barriers. go:notinheap eliminates many no-op write barriers and
go:yeswritebarrierrec makes it possible to opt back in to write
barriers, so these two changes will let us use go:nowritebarrierrec
far more liberally.
This updates #13386, which is about controlling pointers from non-GC'd
memory to GC'd memory. That would require some additional pragma (or
pragmas), but could build on this pragma.
Change-Id: I6314f8f4181535dd166887c9ec239977b54940bd
Reviewed-on: https://go-review.googlesource.com/30939
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This pragma cancels the effect of go:nowritebarrierrec. This is useful
in the scheduler because there are places where we enter a function
without a valid P (and hence cannot have write barriers), but then
obtain a P. This allows us to annotate the function with
go:nowritebarrierrec and split out the part after we've obtained a P
into a go:yeswritebarrierrec function.
Change-Id: Ic8ce4b6d3c074a1ecd8280ad90eaf39f0ffbcc2a
Reviewed-on: https://go-review.googlesource.com/30938
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Many database systems allow returning multiple result sets
in a single query. This can be useful when dealing with many
intermediate results on the server and there is a need
to return more then one arity of data to the client.
Fixes#12382
Change-Id: I480a9ac6dadfc8743e0ba8b6d868ccf8442a9ca1
Reviewed-on: https://go-review.googlesource.com/30592
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If a labeled statement is the target of a goto, we must treat it as the
boundary of a new basic block, but only if it is not already the boundary
of a basic block such as a labeled for loop.
Fixes#16624
Now reports 100% coverage for the test in the issue.
Change-Id: If118bb6ff53a96c738e169d92c03cb3ce97bad0e
Reviewed-on: https://go-review.googlesource.com/30977
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Make a zero-byte write to a hijacked connection not log anything, so handlers
can test whether a connection is hacked by doing a Write(nil).
Fixes#16456
Change-Id: Id56caf822c8592067bd8422672f0c1aec89e866c
Reviewed-on: https://go-review.googlesource.com/30812
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
This clarifies some of the titles so they're more "news" friendly and
less implementation-oriented.
Change-Id: Ied02aa1e6824b04db5d32ecdd58e972515b1f588
Reviewed-on: https://go-review.googlesource.com/29830
Reviewed-by: Rick Hudson <rlh@golang.org>
This change is a copy of CL 22788 in x/tools.
It has no observable effect yet, but brings the two packages in synch.
Change-Id: I266c77547cb46deb69b1a36e1674dfebc430e3a5
Reviewed-on: https://go-review.googlesource.com/22936
Reviewed-by: Russ Cox <rsc@golang.org>
"abc"[1] is not like 'b', in that -"abc"[1] is uint8 math, not ideal constant math.
Delay the constantification until after ideal constant folding is over.
Fixes#11370.
Change-Id: Iba2fc00ca2455959e7bab8f4b8b4aac14b1f9858
Reviewed-on: https://go-review.googlesource.com/15740
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When we need to generate a call to _cgoCheckPointer, we need to type
assert the result back to the desired type. That is harder when the type
is unsafe.Pointer, as the package can have values of unsafe.Pointer
types without actually importing unsafe, by mixing C void* and :=. We
used to handle this by generating a special function for each needed
type, and defining that function in a separate file where we did import
unsafe.
Simplify the code by not generating those functions, but instead just
import unsafe under the alias _cgo_unsafe. This is a simplification step
toward a fix for issue #16591.
Change-Id: I0edb3e04b6400ca068751709fe063397cf960a54
Reviewed-on: https://go-review.googlesource.com/30973
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously, we used OKEY nodes to represent keyed struct literal
elements. The field names were represented by an ONAME node, but this
is clumsy because it's the only remaining case where ONAME was used to
represent a bare identifier and not a variable.
This CL introduces a new OSTRUCTKEY node op for use in struct
literals. These ops instead store the field name in the node's own Sym
field. This is similar in spirit to golang.org/cl/20890.
Significant reduction in allocations for struct literal heavy code
like package unicode:
name old time/op new time/op delta
Template 345ms ± 6% 341ms ± 6% ~ (p=0.141 n=29+28)
Unicode 200ms ± 9% 184ms ± 7% -7.77% (p=0.000 n=29+30)
GoTypes 1.04s ± 3% 1.05s ± 3% ~ (p=0.096 n=30+30)
Compiler 4.47s ± 9% 4.49s ± 6% ~ (p=0.890 n=29+29)
name old user-ns/op new user-ns/op delta
Template 523M ±13% 516M ±17% ~ (p=0.400 n=29+30)
Unicode 334M ±27% 314M ±30% ~ (p=0.093 n=30+30)
GoTypes 1.53G ±10% 1.52G ±10% ~ (p=0.572 n=30+30)
Compiler 6.28G ± 7% 6.34G ±11% ~ (p=0.300 n=30+30)
name old alloc/op new alloc/op delta
Template 44.5MB ± 0% 44.4MB ± 0% -0.35% (p=0.000 n=27+30)
Unicode 39.2MB ± 0% 34.5MB ± 0% -11.79% (p=0.000 n=26+30)
GoTypes 125MB ± 0% 125MB ± 0% -0.12% (p=0.000 n=29+30)
Compiler 515MB ± 0% 515MB ± 0% -0.10% (p=0.000 n=29+30)
name old allocs/op new allocs/op delta
Template 426k ± 0% 424k ± 0% -0.39% (p=0.000 n=29+30)
Unicode 374k ± 0% 323k ± 0% -13.67% (p=0.000 n=29+30)
GoTypes 1.21M ± 0% 1.21M ± 0% -0.14% (p=0.000 n=29+29)
Compiler 4.40M ± 0% 4.39M ± 0% -0.13% (p=0.000 n=29+30)
Passes toolstash/buildall.
Change-Id: Iba4ee765dd1748f67e52fcade1cd75c9f6e13fa9
Reviewed-on: https://go-review.googlesource.com/30974
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL introduces first test for readConsole. And new test
discovered couple of problems with readConsole.
Console characters consist of multiple bytes each, but byte blocks
returned by syscall.ReadFile have no character boundaries. Some
multi-byte characters might start at the end of one block, and end
at the start of next block. readConsole feeds these blocks to
syscall.MultiByteToWideChar to convert them into utf16, but if some
multi-byte characters have no ending or starting bytes, the
syscall.MultiByteToWideChar might get confused. Current version of
syscall.MultiByteToWideChar call will make
syscall.MultiByteToWideChar ignore all these not complete
multi-byte characters.
The CL solves this issue by changing processing from "randomly
sized block of bytes at a time" to "one multi-byte character at a
time". New readConsole code calls syscall.ReadFile to get 1 byte
first. Then it feeds this byte to syscall.MultiByteToWideChar.
The new syscall.MultiByteToWideChar call uses MB_ERR_INVALID_CHARS
flag to make syscall.MultiByteToWideChar return error if input is
not complete character. If syscall.MultiByteToWideChar returns
correspondent error, we read another byte and pass 2 byte buffer
into syscall.MultiByteToWideChar, and so on until success.
Old readConsole code would also sometimes return no data if user
buffer was smaller then uint16 size, which would confuse callers
that supply 1 byte buffer. This CL fixes that problem too.
Fixes#17097
Change-Id: I88136cdf6a7bf3aed5fbb9ad2c759b6c0304ce30
Reviewed-on: https://go-review.googlesource.com/29493
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
It is easy to make the mistake of duplicating json struct field
tags especially when copy/pasting. This commit causes go vet to
report the mistake. Only field tags in the same struct type are
considered, because that is the only case which is undoubtedly an
error.
Fixes#12791.
Change-Id: I4130e4c04b177694cc0daf8f1acaf0751d4f062b
Reviewed-on: https://go-review.googlesource.com/16704
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
There was an inconsistency between the (json encoding + documentation)
and the xml encoding implementation. Pointer to an empty value was
not being serialized (i.e simply ignored). Which had the effect of making
impossible to have a struct with a string field for which we wanted to
serialize the value ""
Fixes#5452
Change-Id: Id858701801158409be01e962d2cda843424bd22a
Reviewed-on: https://go-review.googlesource.com/15684
Reviewed-by: Russ Cox <rsc@golang.org>
Some of the branch instructions (BEQ, BNE, BLT, etc.) accept
all the valid CR values as operands, but the CR register value is
not parsed and not put into the instruction, so that CR0 is always
used regardless of what was specified on the instruction. For example
BEQ CR2,label becomes beq cr0,label.
This adds the change to the PPC64 assembler to recognize the CR value
and set the approppriate field in the instruction so the correct
CR is used. This also adds some general comments on the branch
instruction BC and its operand values.
Fixes#17408
Change-Id: I8e956372a42846a4c09a7259e9172eaa29118e71
Reviewed-on: https://go-review.googlesource.com/30930
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
To compile:
m[k] = v
instead of:
mapassign(maptype, m, &k, &v), do
do:
*mapassign(maptype, m, &k) = v
mapassign returns a pointer to the value slot in the map. It is just
like mapaccess except that it will allocate a new slot if k is not
already present in the map.
This makes map accesses faster but potentially larger (codewise).
It is faster because the write into the map is done when the compiler
knows the concrete type, so it can be done with a few store
instructions instead of calling typedmemmove. We also potentially
avoid stack temporaries to hold v.
The code can be larger when the map has pointers in its value type,
since there is a write barrier call in addition to the mapassign call.
That makes the code at the callsite a bit bigger (go binary is 0.3%
bigger).
This CL is in preparation for doing operations like m[k] += v with
only a single runtime call. That will roughly double the speed of
such operations.
Update #17133
Update #5147
Change-Id: Ia435f032090a2ed905dac9234e693972fe8c2dc5
Reviewed-on: https://go-review.googlesource.com/30815
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Functions like ToLower and ToUpper return the invalid rune back,
so we might as well do the same here.
I changed my mind about panicking when I tried to document the behavior.
Fixes#16690 (again).
Change-Id: If1c68bfcd66daea160fd19948e7672b0e1add106
Reviewed-on: https://go-review.googlesource.com/30935
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Since this changes the offered curves in the ClientHello, all the test
data needs to be updated too.
Change-Id: I227934711104349c0f0eab11d854e5a2adcbc363
Reviewed-on: https://go-review.googlesource.com/30825
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
X25519 (RFC 7748) is now commonly used for key agreement in TLS
connections, as specified in
https://tools.ietf.org/html/draft-ietf-tls-curve25519-01.
This change adds support for that in crypto/tls, but does not enabled it
by default so that there's less test noise. A future change will enable
it by default and will update all the test data at the same time.
Change-Id: I91802ecd776d73aae5c65bcb653d12e23c413ed4
Reviewed-on: https://go-review.googlesource.com/30824
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When updating the test data against OpenSSL, the handshake can fail and
the stdout/stderr output of OpenSSL is very useful in finding out why.
However, printing that output has been broken for some time because its
no longer sent to a byte.Buffer. This change fixes that.
Change-Id: I6f846c7dc80f1ccee9fa1be36f0b579b3754e05f
Reviewed-on: https://go-review.googlesource.com/30823
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change imports the curve25519 package from x/crypto at revision
594708b89f21ece706681be23d04a6513a22de6e.
Change-Id: I379eaa71492959e404259fc1273d0057573bc243
Reviewed-on: https://go-review.googlesource.com/30822
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We will need OpenSSL 1.1.0 in order to test some of the features
expected for Go 1.8. However, 1.1.0 also disables (by default) some
things that we still want to test, such as RC4, 3DES and SSLv3. Thus
developers wanting to update the crypto/tls test data will need to build
OpenSSL from source.
This change updates the test data with transcripts generated by 1.1.0
(in order to reduce future diffs) and also causes a banner to be printed
if 1.1.0 is not used when updating.
(The test for an ALPN mismatch is removed because OpenSSL now terminates
the connection with a fatal alert if no known ALPN protocols are
offered. There's no point testing against this because it's an OpenSSL
behaviour.)
Change-Id: I957516975e0b8c7def84184f65c81d0b68f1c551
Reviewed-on: https://go-review.googlesource.com/30821
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
* Assert that the format is GNU.
Both GNU and STAR have some form of sparse file support with
incompatible header structures. Worse yet, both formats use the
'S' type flag to indicate the presence of a sparse file.
As such, we should check the format (based on magic numbers)
and fail early.
* Move realsize parsing logic into readOldGNUSparseMap.
This is related to the sparse parsing logic and belongs here.
* Fix the termination condition for parsing sparse fields.
The termination condition for reading the sparse fields
is to simply check if the first byte of the offset field is NULL.
This does not seem to be documented in the GNU manual, but this is
the check done by the both the GNU and BSD implementations:
http://git.savannah.gnu.org/cgit/tar.git/tree/src/sparse.c?id=9a33077a7b7ad7d32815a21dee54eba63b38a81c#n7311fa9c7bf90/libarchive/archive_read_support_format_tar.c (L2207)
* Fix the parsing of sparse fields to use parseNumeric.
This is what GNU and BSD do. The previous two links show that
GNU and BSD both handle base-256 and base-8.
* Detect truncated streams.
The call to io.ReadFull does not check if the error is io.EOF.
Getting io.EOF in this method is never okay and should always be
converted to io.ErrUnexpectedEOF.
* Simplify the function.
The logic is essentially a do-while loop so we can remove
some redundant code.
Change-Id: Ib2f601b1a283eaec1e41b1d3396d649c80749c4e
Reviewed-on: https://go-review.googlesource.com/28471
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Most calls to strconv.ParseInt(x, 10, 0) should really be
calls to strconv.ParseInt(x, 10, 64) in order to ensure that they
do not overflow on 32b architectures.
Furthermore, we should document a bug where Uid and Gid may
overflow on 32b machines since the type is declared as int.
Change-Id: I99c0670b3c2922e4a9806822d9ad37e1a364b2b8
Reviewed-on: https://go-review.googlesource.com/28472
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
- trim blocks with multiple predecessors
- trim blocks, which contain only phi-functions
- trim blocks, which can be merged into the successor block
As an example, compiling the following source:
---8<------
package p
type Node struct {
Key int
Left, Right *Node
}
func Search(r *Node, k int) *Node {
for r != nil {
switch {
case k == r.Key:
return r
case k < r.Key:
r = r.Left
default:
r = r.Right
}
}
return nil
}
---8<------
with `GOSSAFUNC=Search" go tool compile t.go`, results in the following
code:
---8<------
genssa
00000 (t.go:8) TEXT "".Search(SB), $0
00001 (t.go:8) FUNCDATA $0, "".gcargs·0(SB)
00002 (t.go:8) FUNCDATA $1, "".gclocals·1(SB)
00003 (t.go:8) TYPE "".r(FP)type.*"".Node, $8
00004 (t.go:8) TYPE "".k+8(FP)type.int, $8
00005 (t.go:8) TYPE "".~r2+16(FP)type.*"".Node, $8
v40 00006 (t.go:9) MOVQ "".k+8(FP), AX
v34 00007 (t.go:9) MOVQ "".r(FP), CX
v33 00008 (t.go:9) TESTQ CX, CX
b2 00009 (t.go:9) JEQ $0, 22
v16 00010 (t.go:11) MOVQ (CX), DX
v21 00011 (t.go:11) CMPQ DX, AX
b9 00012 (t.go:11) JEQ $0, 19
v64 00013 (t.go:13) CMPQ AX, DX
b13 00014 (t.go:13) JGE 17
v36 00015 (t.go:14) MOVQ 8(CX), CX
b4 00016 (t.go:9) JMP 8 <---+
v42 00017 (t.go:16) MOVQ 16(CX), CX |
b21 00018 (t.go:10) JMP 16 ----+
v28 00019 (t.go:12) VARDEF "".~r2+16(FP)
v29 00020 (t.go:12) MOVQ CX, "".~r2+16(FP)
b10 00021 (t.go:12) RET
v44 00022 (t.go:19) VARDEF "".~r2+16(FP)
v45 00023 (t.go:19) MOVQ $0, "".~r2+16(FP)
b5 00024 (t.go:19) RET
00025 (<unknown line number>) END
---8<------
Note the jump at 18 jumps to another jump at 16.
Looking at the function after trimming:
--8<------
after trim [199 ns]
b1:
v1 = InitMem <mem>
v2 = SP <uintptr> : SP
v67 = Arg <*Node> {r} : r[*Node]
v59 = Arg <int> {k} : k[int]
v40 = LoadReg <int> v59 : AX
v34 = LoadReg <*Node> v67 : CX
Plain → b2
b2: ← b1 b4
v8 = Phi <*Node> v34 v68 : CX
v33 = TESTQ <flags> v8 v8
NE v33 → b9 b5 (likely)
b9: ← b2
v16 = MOVQload <int> v8 v1 : DX
v21 = CMPQ <flags> v16 v40
EQ v21 → b10 b13 (unlikely)
b13: ← b9
v64 = CMPQ <flags> v40 v16
LT v64 → b19 b21
b19: ← b13
v36 = MOVQload <*Node> [8] v8 v1 : CX
Plain → b4
b4: ← b21 b19 <
v68 = Phi <*Node> v42 v36 : CX <- no actual code
Plain → b2 <
b21: ← b13
v42 = MOVQload <*Node> [16] v8 v1 : CX
Plain → b4
b10: ← b9
v28 = VarDef <mem> {~r2} v1
v29 = MOVQstore <mem> {~r2} v2 v8 v28
v30 = Copy <mem> v29
Ret v30
b5: ← b2
v44 = VarDef <mem> {~r2} v1
v45 = MOVQstoreconst <mem> {~r2} [val=0,off=0] v2 v44
v47 = Copy <mem> v45
Ret v47
--8<------
The jump at 16 corresponds to the edge b21 -> b4. The block b4 contains
only phi-ops, i.e. no actual code besides the jump to b2. However b4 is
not trimmed, because it a) has more than one predecessor, and b) it is
not empty.
This change enhances trim.go to remove more blocks, subject to the
following criteria:
- block has predecessors (i.e. not the start block)
- block is BlockPlain
- block does not loop back to itself
- block is the single predecessor of its successor; the instructions of
the block are merged into the successor
- block does no emit actual code, besides a possible unconditional
jump.
Currently only OpPhi are considered to not be actual code,
perhaps OpKeepAlive/others should be considered too?
As an example, after the change, the block b4 is trimmed and the jump at
18 jumps directly to 8.
Revision 1: Adjust phi-ops arguments after merge
Ensure the number of phi-ops arguments matches the new number of
predecessors in the merged block.
When moving values, make them refer to the merged block.
Revision 2:
- Make clear the intent that we do not want to trim the entry block
- Double check that we are merging a phi operation
- Minor code style fix
- Fix a potentially dangerous situation when a blocks refers to the
inline value space in another block
Change-Id: I0ab91779f931f404d11008f5c45606d985d7fbaa
Reviewed-on: https://go-review.googlesource.com/28812
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Update comments for duffzero and duffcopy
which referred to legacy locations:
+ cmd/?g/cgen.go
+ cmd/?g/ggen.go
Remnants of the old days when we had 5g, 6g etc.
Those locations have since moved to:
+ cmd/compile/internal/<arch>/cgen.go
+ cmd/compile/internal/<arch>/ggen.go
Change-Id: Ie2ea668559d52d42b747260ea69a6d5b3d70e859
Reviewed-on: https://go-review.googlesource.com/29073
Reviewed-by: Russ Cox <rsc@golang.org>
EvalSymlinks returns error if given path or its target path don't exist.
Add a test for future improvement.
Change-Id: Ic9a4aa5eaee0fe7ac523d54d8eb3132a11b380b3
Reviewed-on: https://go-review.googlesource.com/27330
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Add checks for failure of CreateEvent, SetEvent or
WaitForSingleObject. Any failures are considered fatal and
will throw() after printing an informative message.
Updates #16646
Change-Id: I3bacf9001d2abfa8667cc3aff163ff2de1c99915
Reviewed-on: https://go-review.googlesource.com/26655
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This cosmetic change defines ld.FlagTextAddr using ld.HEADR in
the Plan 9 cases, like it is done for other operating systems.
Change-Id: Ic929c1c437f25661058682cf3e159f0b16cdc538
Reviewed-on: https://go-review.googlesource.com/30912
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Support for multiple text sections was added in CL 27790.
However, this change broke the build on plan9/amd64.
In relocsym, the R_ADDROFF relocation was changed to
use offsets relative to the start of the first text
section. However, Segtext.Vaddr is the address of
the text segment, while we expect to start from
the first section (text.runtime) of the text segment.
Fixes#17411.
Change-Id: I86bbcbda81cea735b0ecf156eab2e6e5d63acce3
Reviewed-on: https://go-review.googlesource.com/30911
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
All the implementations of NsecToTimespec and NsecToTimeval were the
same other than types. Write a single version that uses
GOARCH/GOOS-specific setTimespec and setTimeval functions to handle the
types.
The logic in NsecToTimespec and NsecToTimeval caused times before 1970
to have a negative usec/nsec. The Linux kernel requires that usec
contain a positive number; for consistency, we do this for both
NsecToTimespec and NsecToTimeval.
Change-Id: I525eaba2e7cdb00cb57fa00182dabf19fec298ae
Reviewed-on: https://go-review.googlesource.com/30826
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Support the tagging of binaries created with the internal linker
on Solaris as having a non-executable stack by writing a PT_SUNWSTACK
program header.
Fixes#16074
Change-Id: I3888f2153083385d04a52f341570f93e5738b276
Reviewed-on: https://go-review.googlesource.com/24142
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The error coming out of matchGoImport does not differentiate between
having no imports, and having some invalid imports.
This some extra context to the error message to help debug these issues.
Fixes#16467
Change-Id: I3e9a119ed73da1bed5e07365be0221ea6b7f19db
Reviewed-on: https://go-review.googlesource.com/25121
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
If strict option is enabled, when decoding, instead of skip the padding
bits, it will do strict check to enforce they are set to zero.
Fixes#15656
Change-Id: I869fb725a39cc9dde44dbc4ff0046446e7abc642
Reviewed-on: https://go-review.googlesource.com/24964
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is a followup to CL 24747, where the package doc phrase
"Functions in this package replace occurrences of slash unless otherwise specified."
was removed. The phrase was originally added in CL 7310 together
with this explicit opt out statement for SplitList.
Remove it since it's no longer neccessary. This helps consistency.
Updates #16111.
Updates #10122.
Change-Id: Iba86de57c24100adecac9cb5892ce180126c0ea6
Reviewed-on: https://go-review.googlesource.com/25250
Reviewed-by: Russ Cox <rsc@golang.org>
The canBackTrace variable is true for all of the architectures
Go supports and this is likely to remain the case as new
architectures are added.
Change-Id: I73900c018eb4b2e5c02fccd8d3e89853b2ba9d90
Reviewed-on: https://go-review.googlesource.com/22423
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When generating callgrind format output, produce cost lines at
instruction granularity. This allows visualizers supporting the
callgrind format to display instruction-level profiling information.
We also need to provide the object file (ob=) in order for tools to find
the object file to disassemble when displaying assembly.
We opportunistically group cost lines corressponding to the same
function together, reducing the number of superfluous description lines.
Subposition compression (relative position numbering) is also used to
reduce the output size.
Change-Id: Id8e960b81dc7a47ec1dfbae877521f76972431c4
Reviewed-on: https://go-review.googlesource.com/23781
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Raul Silvera <rsilvera@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
The trace tool can generate some interesting profiles, but it was only
exposing them as svg through the web UI. This adds command line options
to generate the raw pprof file.
Change-Id: I52e4f909fdca6f65c3616add444e3892783640f4
Reviewed-on: https://go-review.googlesource.com/23324
Reviewed-by: Russ Cox <rsc@golang.org>
We should preserve the fact that a roundtrip read on fields with the zero
value should remain the zero for those that are reasonable to stay that way.
If the zero value for a MS-DOS timestamp was used, then it is sensible for
that zero value to also be read back later.
Fixes#17403
Change-Id: I32c3915eab180e91ddd2499007374f7b85f0bd76
Reviewed-on: https://go-review.googlesource.com/30811
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also, fix a byte-ordering problem with stack maps for assembly
function signatures on big-endian targets.
Change-Id: I6e8698f5fbb04b31771a65f4a8f3f9c045ff3c98
Reviewed-on: https://go-review.googlesource.com/30816
Reviewed-by: Austin Clements <austin@google.com>
We save and restore the link register in non-leaf functions because
it is clobbered by CALLs. It is therefore available for general
purpose use.
Only enabled on s390x currently. The RC4 benchmarks in particular
benefit from the extra register:
name old speed new speed delta
RC4_128 243MB/s ± 2% 341MB/s ± 2% +40.46% (p=0.008 n=5+5)
RC4_1K 267MB/s ± 0% 359MB/s ± 1% +34.32% (p=0.008 n=5+5)
RC4_8K 271MB/s ± 0% 362MB/s ± 0% +33.61% (p=0.008 n=5+5)
Change-Id: Id23bff95e771da9425353da2f32668b8e34ba09f
Reviewed-on: https://go-review.googlesource.com/30597
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The Subject and Issuer names in a certificate look like they should be a
list of key-value pairs. However, they're actually a list of lists of
key-value pairs. Previously we only looked at the first element of each
sublist and the vast majority of certificates only have one element per
sublist.
However, it's possible to have multiple elements and some 360
certificates from the “Pilot” log are so constructed.
This change causes all elements of the sublists to be processed.
Fixes#16836.
Change-Id: Ie0a5159135b08226ec517fcf251aa17aada37857
Reviewed-on: https://go-review.googlesource.com/30810
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In some cases the members of the root set from which flood
runs themselves escape, without their referents being also
tagged as escaping. Fix this by reflooding from those roots
whose escape increases, and also enhance the "leak" test to
include reachability from a heap-escaped root.
Fixes#17318.
Change-Id: Ied1e75cee17ede8ca72a8b9302ce8201641ec593
Reviewed-on: https://go-review.googlesource.com/30693
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
A later CL will be adding more code here.
It will help to keep it separate from the other code.
Change-Id: I971ba53de819cd10991b51fdec665984939a5f9b
Reviewed-on: https://go-review.googlesource.com/30709
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The Montgomery multiply code is applicable to this case
but was being bypassed. Don't do that.
The old test len(x) > 1 was really just a bad approximation to x > 1.
name old time/op new time/op delta
Exp-8 5.56ms ± 4% 5.73ms ± 3% ~ (p=0.095 n=5+5)
Exp2-8 7.59ms ± 1% 5.66ms ± 1% -25.40% (p=0.008 n=5+5)
This comes up especially when doing Fermat (Miller-Rabin)
primality tests with base 2.
Change-Id: I4cc02978db6dfa93f7f3c8f32718e25eedb4f5ed
Reviewed-on: https://go-review.googlesource.com/30708
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This way you can still run 'go test' or 'go bench -run Foo'
without wondering why it is taking so very long.
Change-Id: Icfa097a6deb1d6682acb7be9f34729215c29eabb
Reviewed-on: https://go-review.googlesource.com/30707
Reviewed-by: Robert Griesemer <gri@golang.org>
ARM direct CALL/JMP instruction has 24 bit offset, which can only
encodes jumps within +/-32M. When the target is too far, the top
bits get truncated and the program jumps wild.
This CL detects too-far jumps and automatically insert trampolines,
currently only internal linking on ARM.
It is necessary to make the following changes to the linker:
- Resolve direct jump relocs when assigning addresses to functions.
this allows trampoline insertion without moving all code that
already laid down.
- Lay down packages in dependency order, so that when resolving a
inter-package direct jump reloc, the target address is already
known. Intra-package jumps are assumed never too far.
- a linker flag -debugtramp is added for debugging trampolines:
"-debugtramp=1 -v" prints trampoline debug message
"-debugtramp=2" forces all inter-package jump to use
trampolines (currently ARM only)
"-debugtramp=2 -v" does both
- Some data structures are changed for bookkeeping.
On ARM, pseudo DIV/DIVU/MOD/MODU instructions now clobber R8
(unfortunate). In the standard library there is no ARM assembly
code that uses these instructions, and the compiler no longer emits
them (CL 29390).
all.bash passes with -debugtramp=2, except a disassembly test (this
is unavoidable as we changed the instruction).
TBD: debug info of trampolines?
Fixes#17028.
Change-Id: Idcce347ea7e0af77c4079041a160b2f6e114b474
Reviewed-on: https://go-review.googlesource.com/29397
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If we get a SIGPROF on a non-Go thread, and the program has not called
runtime.SetCgoTraceback so we have no way to collect a stack trace, then
record a profile that is just the PC where the signal occurred. That
will at least point the user to the right area.
Retrieving the PC from the sigctxt in a signal handler on a non-G thread
required marking a number of trivial sigctxt methods as nosplit, and,
for extra safety, nowritebarrierrec.
The test shows that the existing test CgoPprofThread test does not test
the stack trace, just the profile signal. Leaving that for later.
Change-Id: I8f8f3ff09ac099fc9d9df94b5a9d210ffc20c4ab
Reviewed-on: https://go-review.googlesource.com/30252
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
When starting tracing, EvGoCreate events are added for existing
goroutines that may have been blocking in syscall. EvGoCreate
increments the runnable goroutine count. This change makes the
following EvGoInSyscall event decrement the runnable goroutine count
because we now know that goroutine is in syscall, and not runnable.
Made generateTrace return an error, at any given time, the number
of runnable/running/insyscall goroutines becomes non-negative.
Added a basic test that checks the number of runnable/running
goroutines don't include the goroutines in syscall - the test failed
before this change.
Change-Id: Ib732c382e7bd17158a437576f9d589ab89097ce6
Reviewed-on: https://go-review.googlesource.com/25552
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
CL 14472 solved issue #12030 by explicitly linking msvcrt.dll
to every cgo executable we build. This CL achieves the same
by manually loading ntdll.dll during startup.
Updates #12030
Change-Id: I5d9cd925ef65cc34c5d4031c750f0f97794529b2
Reviewed-on: https://go-review.googlesource.com/30737
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
The (pc, line) deltas in the line number information are currently encoded
either with a special opcode, or with a triplet of DW_LNS_advance_pc,
DW_LNS_advance_line, and DW_LNS_copy instructions. Instead of DW_LNS_copy,
this change always uses a special opcode, which can make DW_LNS_advance_pc or
DW_LNS_advance_line unnecessary, or make their operands take fewer bytes. It
chooses the special opcode so that the encoding of the remaining deltas is as
small as possible.
Use DW_LNS_const_add_pc or DW_LNS_fixed_advance_pc instead of DW_LNS_advance_pc
for deltas where they save a byte.
Update LINE_BASE and LINE_RANGE constants to optimal values for this strategy.
This reduces line number information by about 35% and total size by about 2%
for a typical binary.
Change-Id: Ia61d6bf19c95c1d34ba63c67ed32b376beda225f
Reviewed-on: https://go-review.googlesource.com/30577
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
- Add new BenchmarkQuoRem.
- Eliminate allocation in divLarge nat pool
- Unroll mulAddVWW body 4x
- Remove some redundant slice loads in divLarge
name old time/op new time/op delta
QuoRem-8 2.18µs ± 1% 1.93µs ± 1% -11.38% (p=0.000 n=19+18)
The starting point in the comparison here is Cherry's
pending CL to turn mulWW and divWW into intrinsics.
The optimizations in divLarge work best because all
the function calls are gone. The effect of this CL is not
as large if you don't assume Cherry's CL.
Change-Id: Ia6138907489c5b9168497912e43705634e163b35
Reviewed-on: https://go-review.googlesource.com/30613
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This, along with CL 30140, removes ~50% of stack write barriers
mentioned in issue #17330. The remaining are most due to Phi and
FwdRef, which is not resolved when building SSA. We might be
able to do it at a later stage where Phi and Copy propagations
are done, but matching an if-(store-store-call)+ sequence seems
not very pleasant.
Updates #17330.
Change-Id: Iaa36c7b1f4c4fc3dc10a27018a3b0e261094cb21
Reviewed-on: https://go-review.googlesource.com/30290
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Inputs to store[BHW] and cmpW(U) need not be correct
in more bits than are used by the instruction.
Added a pattern tailored to what appears to be cgo boilerplate.
Added a pattern (also seen in cgo boilerplate and hashing)
to replace {EQ,NE}-CMP-ANDconst with {EQ-NE}-ANDCCconst.
Added a pattern to clean up ANDconst shift distance inputs
(this was seen in hashing).
Simplify repeated and,or,xor.
Fixes#17109.
Change-Id: I68eac83e3e614d69ffe473a08953048c8b066d88
Reviewed-on: https://go-review.googlesource.com/30455
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is a followup to issue #13805. That change avoid leaks for types that
don't have any pointers for the single assignment form of a dottype expression.
This does the same for the double assignment form.
Fixes#15796
Change-Id: I27474cade0ff1f3025cb6392f47b87b33542bc0f
Reviewed-on: https://go-review.googlesource.com/24906
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Renamed TestPOSTQuery to TestParseFormQuery and added testing
for the ";" delimiter, an empty key, an empty value and an
empty key + value.
Also added TestParseFormQueryMethods to make sure forms sent in
PATCH and PUT (and no others) request are parsed correctly in
ParseForm.
Fixes#17368
Change-Id: I445aad324ffc7b38d179ea41953bffbac0cddffe
Reviewed-on: https://go-review.googlesource.com/30555
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL removes support for MOVD instructions that store the address
of a global variable. For example:
MOVD $main·a(SB), (R1)
MOVD $main·b(SB), main·c(SB)
These instructions are emulated and the new backend doesn't need them
(the stores now always go through an intermediate register).
Change-Id: I3a1bcb3f19c5096ad0426afd76d35a4d7975733b
Reviewed-on: https://go-review.googlesource.com/30720
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
With this change, the code in bug #15609 compiles and runs properly:
0000000000401070 <main.jump>:
401070: ff 15 aa 7e 06 00 callq *0x67eaa(%rip) # 468f20 <main.pointer>
401076: c3 retq
0000000000468f20 g O .rodata 0000000000000008 main.pointer
Fixes#15609
Change-Id: Iebb4d5a9f9fff335b693f4efcc97882fe04eefd7
Reviewed-on: https://go-review.googlesource.com/22950
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
With help of a new interactive commit classifier tool (tool location
TBD, likely x/build/cmd/writenotes), classify all commits from go1.7
up to 56d35d4.
We can selectively cull this list later. When in doubt, I erred on the
side of inclusion for now.
Change-Id: I458945004e1b1a148fb2f294b454a390ef4f92c2
Reviewed-on: https://go-review.googlesource.com/30696
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TESTB was implemented as AND $0xff, Rx, REGTMP. Unfortunately there
is no 3-operand AND-with-immediate instruction and so it was emulated
by the assembler using two instructions.
This CL uses CMPW instead of AND and also optimizes CMPW to use
the chi instruction where possible.
Overall this CL reduces the size of the .text section of the
bin/go binary by ~2%.
Change-Id: Ic335c29fc1129378fcbb1265bfb10f5b744a0f3f
Reviewed-on: https://go-review.googlesource.com/30690
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No need to build a bespoke dom tree here when we might
have one cached already. The allocations for the dom tree
were also more expensive than they needed to be.
Fixes#12021
Change-Id: I6a967880aee03660ad6fc293f8fc783779cae11d
Reviewed-on: https://go-review.googlesource.com/30671
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently these are labeled "MARK", which was accurate in the STW
collector, but these really indicate mark termination now, since
marking happens for the full duration of the concurrent GC. Re-label
them as "MARK TERMINATION" to clarify this.
Change-Id: Ie98bd961195acde49598b4fa3f9e7d90d757c0a6
Reviewed-on: https://go-review.googlesource.com/30018
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Currently, the process-wide GC state is attributed to the P that
happened to perform the allocation that exceeded the GC trigger. This
is pretty arbitrary and makes it hard to see when GC is running since
the GC spans are intermingled with a lot of other trace noise.
The current display is particularly confusing because it creates three
sub-rows in the P row that can overlap each other. Usually a P has
just two sub-rows: one showing the current G and another showing that
G's activity. However, because GC is attributed to a proc, it winds up
as a third row that neither subsumes nor is subsumed by any other row.
This in turn screws up the trace's layout and results in overlapping
events.
Fix these problems by creating a new dedicated row like the existing
"Network" and "Timer" rows and displaying process-wide GC events in
this row. Mark termination and sweep events still appear in their
respective P rows because these are meaningfully attributed.
Change-Id: Ie1a1c6cf8c446e4b043f10f3968f91ff1b546d15
Reviewed-on: https://go-review.googlesource.com/30017
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
When GC is disabled, we set gcpercent to -1. However, we still use
gcpercent to compute several values, such as next_gc and gc_trigger.
These calculations are meaningless when gcpercent is -1 and result in
meaningless values. This is okay in a sense because we also never use
these values if gcpercent is -1, but they're confusing when exposed to
the user, for example via MemStats or the execution trace. It's
particularly unfortunate in the execution trace because it attempts to
plot the underflowed value of next_gc, which scales all useful
information in the heap row into oblivion.
Fix this by making next_gc ^0 when gcpercent < 0. This has the
advantage of being true in a way: next_gc is effectively infinite when
gcpercent < 0. We can also detect this special value when updating the
execution trace and report next_gc as 0 so it doesn't blow up the
display of the heap line.
Change-Id: I4f366e4451f8892a4908da7b2b6086bdc67ca9a9
Reviewed-on: https://go-review.googlesource.com/30016
Reviewed-by: Rick Hudson <rlh@golang.org>
This CL makes minor adjustment to the handling of spaces and newlines
and then documents the result.
The semantic adjustment mainly concerns the handling of a run of
spaces following a newline in the format, like in "\n ".
Previously, that run of spaces was ignored entirely, leading to paradoxes
like the format "1 \n 2" not matching itself as input.
Now, spaces following a newline in the format match zero or more
spaces following the corresponding newline in the input.
The changes to the test suite show how minor the semantic adjustments are
and how they make the behavior more regular than previously.
This CL also updates the documentation to explain the handling of
spaces more precisely, incorporating the draft from CL 17723 but
describing the newly introduced behavior.
Fixes#13565.
Change-Id: I129666e9ba42de3c28b67f75cb47488e9a4c1867
Reviewed-on: https://go-review.googlesource.com/30611
Reviewed-by: Rob Pike <r@golang.org>
There are no semantic changes here, just tests to establish
the status quo. A followup CL will make some semantic changes,
the (limited) scope of which should be clear from the number of
tests that change.
For #13565.
Change-Id: I960749cf59d4dfe39c324875bcc575096654f883
Reviewed-on: https://go-review.googlesource.com/30610
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
On 64-bit big-endian GNU/Linux machines we need to treat sigset as a
single uint64, not as a pair of uint32 values. This fix was already made
for s390x, but not for ppc64 (which is big-endian--the little endian
version is known as ppc64le). So copy os_linux_390.x to
os_linux_be64.go, and use build constraints as needed.
Fixes#17361
Change-Id: Ia0eb18221a8f5056bf17675fcfeb010407a13fb0
Reviewed-on: https://go-review.googlesource.com/30602
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This simply documents the status quo accepted by cmd/compile, gccgo,
and go/types. The new language matches the language used for indices
of index expressions for arrays and slices.
Fixes#16679.
Change-Id: I65447889fbda9d222f2a9e6c10334d1b38c555f0
Reviewed-on: https://go-review.googlesource.com/30474
Reviewed-by: Rob Pike <r@golang.org>
AddDate now retrieves location from t.Location() to ensure that
it never calls Date with a nil location.
Added test for this bug on all Time's methods
Fixes#15852
Change-Id: Id2a222af56993f741ad0b802a2c3b89e8e463926
Reviewed-on: https://go-review.googlesource.com/23561
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Using 387 mode was computing it without underflow to zero,
apparently due to an 80-bit intermediate. Avoid underflow even
with 64-bit floats.
This eliminates the TODOs in the test suite.
Fixes linux-386-387 build and fixes#11441.
Change-Id: I8abaa63bfdf040438a95625d1cb61042f0302473
Reviewed-on: https://go-review.googlesource.com/30540
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Struct fields can be suppressed in JSON serialization by "-" tags, but
that doesn't preclude generation of "-" object keys.
Document and verify the mechanism for doing so.
Change-Id: I7f60e1759cfee15cb7b2447cd35fab91c5b004e6
Reviewed-on: https://go-review.googlesource.com/21204
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Deletes the following s390x instructions:
- ADDME
- ADDZE
- SUBME
- SUBZE
They appear to be emulated PPC instructions left over from the
porting process and I don't think they will ever be useful.
Change-Id: I9b1ba78019dbd1218d0c8f8ea2903878802d1990
Reviewed-on: https://go-review.googlesource.com/30538
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Adds the following instructions and uses them in the SSA backend:
- ANDW
- ORW
- XORW
The instruction encodings for 32-bit operations are typically shorter,
particularly when an immediate is used. For example, XORW $-1, R1
only requires one instruction, whereas XOR requires two.
Also removes some unused instructions (that were emulated):
- ANDN
- NAND
- ORN
- NOR
Change-Id: Iff2a16f52004ba498720034e354be9771b10cac4
Reviewed-on: https://go-review.googlesource.com/30291
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Better to just rematerialize them when needed instead of
cross-register spilling or other techniques for keeping them in
registers.
This helps for amd64 code that does 1 << x. It is better to do
loop:
MOVQ $1, AX // materialize arg to SLLQ
SLLQ CX, AX
...
goto loop
than to do
MOVQ $1, AX // materialize outsize of loop
loop:
MOVQ AX, DX // save value that's about to be clobbered
SLLQ CX, AX
MOVQ DX, AX // move it back to the correct register
goto loop
Update #16092
Change-Id: If7ac290208f513061ebb0736e8a79dcb0ba338c0
Reviewed-on: https://go-review.googlesource.com/30471
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The CgoExternalThreadSIGPROF test starts a thread at constructor time
that does a busy loop. That can throw off some other tests. So only
build that code if testprogcgo is built with the tag threadprof, and
adjust the tests that use that code to pass that build tag.
This revealed that the CgoPprofThread test was not testing what it
should have, as it never actually started the cpuHog thread. It was
passing because of the busy loop thread. Fix it to start the thread as
intended.
Change-Id: I087a9e4fc734a86be16a287456441afac5676beb
Reviewed-on: https://go-review.googlesource.com/30362
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently if you declare a type overwriting a predeclared type
and export methods on it they will be exposed in godoc, even
though the type itself is not exported. This corrects that
by making all methods on these types hidden, since that's
the expected output.
Fixes#9860
Change-Id: I14037bdcef1b4bbefcf299a143bac8bf363718e0
Reviewed-on: https://go-review.googlesource.com/20610
Reviewed-by: Russ Cox <rsc@golang.org>
It is pretty confusing when there are Go files ignored for mismatching
build tags and similar and we output "no buildable Go files" without
giving any other information about some Go files have been ignored.
Fixes#17008.
Change-Id: I1766ee86a9a7a72f6694deae3f73b47bfc9d0be5
Reviewed-on: https://go-review.googlesource.com/29113
Run-TryBot: Jaana Burcu Dogan <jbd@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Suppose you have already downloaded "foo.bar/baz", where the repo
is for all of foo.bar/, and you then "go get -u foo.bar/...".
The command-line wildcard expands to foo.bar/baz,
and go get updates the foo.bar/ repo.
Suppose that the repo update brought in foo.bar/quux,
though, which depends on other.site/bar.
Download does not consider foo.bar/quux, since it's
only looking at foo.bar/baz, so it didn't download other.site/bar.
After the download, we call importPaths(args) to decide what to install.
That call was reevaluating the original wildcard with the new repo
and matching foo.bar/quux, which was missing its dependency
other.site/bar, causing a build failure.
The fix in this CL is to remember the pre-download expansion
of the argument list and pass it to the installer. Then only the things
we tried to download get installed.
The case where foo.bar/ is not even checked out yet continues to work,
because in that case we leave the wildcard in place, and download
reevaluates it during the download.
The fix in this CL may not be the right long-term fix, but it is at least a fix.
It may be that download should be passed all the original wildcards
so that it can reexpand them as new code is downloaded, ideally reaching
a fixed point. That can be left for another day.
In short:
- The problem is that the "install" half of "go get" was trying to install
more than the "download" half was properly downloading.
- The fix in this CL is to install just what was downloaded (install less).
- It may be that a future CL should instead download what will be installed (download more).
Fixes#14450.
Change-Id: Ia1984761d24439549b7cff322bc0dbc262c1a653
Reviewed-on: https://go-review.googlesource.com/19892
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
RHEL 7 introduces a new tool, update-ca-trust(8), which places the
certificate bundle in a new location. Add this path to the list of
locations that are searched for the certificate bundle.
Fixes#15749
Change-Id: Idc97f885ee48ef085f1eb4dacbd1c2cf55f94ff5
Reviewed-on: https://go-review.googlesource.com/30375
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This reverts commit 59320c396e.
Reasons:
This CL was causing failures on a large regression test that we run
within Google. The issues arises from two bugs in the CL:
* The CL dropped support for ';' as a delimiter (see https://golang.org/issue/2210)
* The handling of an empty string caused an empty record to be added when
no record was added (see https://golang.org/cl/30454 for my attempted fix)
The logic being added is essentially a variation of url.ParseQuery,
but altered to accept an io.Reader instead of a string.
Since it is duplicated (but modified) logic, there needs to be good
tests to ensure that it's implementation doesn't drift in functionality
from url.ParseQuery. Fixing the above issues and adding the associated
regression tests leads to >100 lines of codes.
For a 4% reduction in CPU time, I think this complexity and duplicated
logic is not worth the effort.
As such, I am abandoning my efforts to fix the existing issues and
believe that reverting CL/20301 is the better course of action.
Updates #14655
Change-Id: Ibb5be0a5b48a16c46337e213b79467fcafee69df
Reviewed-on: https://go-review.googlesource.com/30470
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#17224.
Some systems have more than just "lo" in a fresh network namespace, due
to IPv6. Instead of testing for exactly 3 lines of output (implying 1
interface), just test to make sure that the unshare call resulted in
fewer interfaces than before. This should still verify that unshare did
something.
Change-Id: Iaf84c2b0e673fc207059d62e2f4dd7583a753419
Reviewed-on: https://go-review.googlesource.com/30372
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Jessica Frazelle <me@jessfraz.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change float32/float64 formatting to use non-exponential form
for a slightly wider range, to more closely match ES6 JSON.stringify
and other JSON generators.
Most notably:
1e20 now formats as 100000000000000000000 (previously 1e+20)
1e-6 now formats as 0.000001 (previously 1e-06)
1e-7 now formats as 1e-7 (previously 1e-07)
This also brings the int64 and float64 formatting in line with each other,
for all shared representable values. For example both int64(1234567)
and float64(1234567) now format as "1234567", where before the
float64 formatted as "1.234567e+06".
The only variation now compared to ES6 JSON.stringify is that
Go continues to encode negative zero as "-0", not "0", so that
the value continues to be preserved during JSON round trips.
Fixes#6384.
Fixes#14135.
Change-Id: Ib0e0e009cd9181d75edc0424a28fe776bcc5bbf8
Reviewed-on: https://go-review.googlesource.com/30371
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
These are conditional branches that takes a register instead of
flags as control value.
Reduce binary size by 0.7%, text size by 2.4% (cmd/go as an
exmaple).
Change-Id: I0020cfde745f9eab680b8b949ad28c87fe183afd
Reviewed-on: https://go-review.googlesource.com/30030
Reviewed-by: David Chase <drchase@google.com>
In the function prologue, we emit a jump to the beginning of
the function immediately after calling morestack. And in the
runtime stack growing code, it decodes and emulates that jump.
This emulation was necessary before we had per-PC SP deltas,
since the traceback code assumed that the frame size was fixed
for the whole function, except on the first instruction where
it was 0. Since we now have per-PC SP deltas and PCDATA, we
can correctly record that the frame size is 0. This makes the
emulation unnecessary.
This may be helpful for registerized calling convention, where
there may be unspills of arguments after calling morestack. It
also simplifies the runtime.
Change-Id: I7ebee31eaee81795445b33f521ab6a79624c4ceb
Reviewed-on: https://go-review.googlesource.com/30138
Reviewed-by: David Chase <drchase@google.com>
complex64 and complex128 are treated like [2]float32 and [2]float64,
so it makes sense to align them the same way.
Change-Id: Ic614bcdcc91b080aeb1ad1fed6fc15ba5a2971f8
Reviewed-on: https://go-review.googlesource.com/19800
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
To refine a set of possibly equivalent values, the old CSE algorithm
picked one value, compared it against all the others, and made two sets
out of the results (the values that match the picked value and the
values that didn't). Unfortunately, this leads to O(n^2) behavior. The
picked value ends up being equal to no other values, we make size 1 and
size n-1 sets, and then recurse on the size n-1 set.
Instead, sort the set by the equivalence classes of its arguments. Then
we just look for spots in the sorted list where the equivalence classes
of the arguments change. This lets us do a multi-way split for O(n lg
n) time.
This change makes cmpDepth unnecessary.
The refinement portion used to call the type comparator. That is
unnecessary as the type was already part of the initial partition.
Lowers time of 16361 from 8 sec to 3 sec.
Lowers time of 15112 from 282 sec to 20 sec. That's kind of unfair, as
CL 30257 changed it from 21 sec to 282 sec. But that CL fixed other bad
compile times (issue #17127) by large factors, so net still a big win.
Fixes#15112Fixes#16361
Change-Id: I351ce111bae446608968c6d48710eeb6a3d8e527
Reviewed-on: https://go-review.googlesource.com/30354
Reviewed-by: Todd Neal <todd@tneal.org>
This commit changes parseRecord to allocate a single string per record,
instead of per field, by using indexes into the raw record.
Benchstat (done with f69991c17)
name old time/op new time/op delta
Read-8 3.17µs ± 0% 2.78µs ± 1% -12.35% (p=0.016 n=4+5)
ReadWithFieldsPerRecord-8 3.18µs ± 1% 2.79µs ± 1% -12.23% (p=0.008 n=5+5)
ReadWithoutFieldsPerRecord-8 4.59µs ± 0% 2.77µs ± 0% -39.58% (p=0.016 n=4+5)
ReadLargeFields-8 57.0µs ± 0% 55.7µs ± 0% -2.18% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
Read-8 660B ± 0% 664B ± 0% +0.61% (p=0.008 n=5+5)
ReadWithFieldsPerRecord-8 660B ± 0% 664B ± 0% +0.61% (p=0.008 n=5+5)
ReadWithoutFieldsPerRecord-8 1.14kB ± 0% 0.66kB ± 0% -41.75% (p=0.008 n=5+5)
ReadLargeFields-8 3.86kB ± 0% 3.94kB ± 0% +1.86% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
Read-8 30.0 ± 0% 18.0 ± 0% -40.00% (p=0.008 n=5+5)
ReadWithFieldsPerRecord-8 30.0 ± 0% 18.0 ± 0% -40.00% (p=0.008 n=5+5)
ReadWithoutFieldsPerRecord-8 50.0 ± 0% 18.0 ± 0% -64.00% (p=0.008 n=5+5)
ReadLargeFields-8 66.0 ± 0% 24.0 ± 0% -63.64% (p=0.008 n=5+5)
For a simple application that I wrote, which reads in a CSV file (via
ReadAll) and outputs the number of rows read (15857625 rows), this change
reduces the total time on my notebook from ~58 seconds to ~48 seconds.
This reduces time and allocations (bytes) each by ~6% for a real world
CSV file at work (~230000 rows, 13 colums).
Updates #16791
Change-Id: Ia07177c94624e55cdd3064a7d2751fb69322d3e4
Reviewed-on: https://go-review.googlesource.com/24723
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also adds two tests: one to exercise the counter incrementing code
and one which checks the output of the optimized implementation
against that of the generic implementation for large/unaligned data
sizes.
Uses the KIMD instruction for GHASH and the KMCTR instruction for AES
in counter mode.
AESGCMSeal1K 75.0MB/s ± 2% 1008.7MB/s ± 1% +1245.71% (p=0.000 n=10+10)
AESGCMOpen1K 75.3MB/s ± 1% 1006.0MB/s ± 1% +1235.59% (p=0.000 n=10+9)
AESGCMSeal8K 78.5MB/s ± 1% 1748.4MB/s ± 1% +2127.34% (p=0.000 n=9+10)
AESGCMOpen8K 78.5MB/s ± 0% 1752.7MB/s ± 0% +2134.07% (p=0.000 n=10+9)
Change-Id: I88dbcfcb5988104bfd290ae15a60a2721c1338be
Reviewed-on: https://go-review.googlesource.com/30361
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Calling cgocallback from a signal handler can fail when using the race
detector. Calling cgocallback will lead to a call to newextram which
will call oneNewExtraM which will call racegostart. The racegostart
function will set up some race detector data structures, and doing that
will sometimes call the C memory allocator. If we are running the signal
handler from a signal that interrupted the C memory allocator, we will
crash or hang.
Instead, change the signal handler code to call needm and dropm. The
needm function will grab allocated m and g structures and initialize the
g to use the current stack--the signal stack. That is all we need to
safely call code that allocates memory and checks whether it needs to
split the stack. This may temporarily leave us with no m available to
run a cgo callback, but that is OK in this case since the code we call
will quickly either crash or call dropm to return the m.
Implementing this required changing some of the setSignalstackSP
functions to avoid a write barrier. These functions never need a write
barrier but in some cases generated one anyhow because on some systems
the ss_sp field is a pointer.
Change-Id: I3893f47c3a66278f85eab7f94c1ab11d4f3be133
Reviewed-on: https://go-review.googlesource.com/30218
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
All the prefixes of the testGIF produce errors today,
but they differ wildly in which errors: some are io.EOF,
others are io.ErrUnexpectedEOF, and others are gif-specific.
Make them all gif-specific to explain context, and make
any complaining about EOF be sure to mention the EOF
is unexpected.
Fixes#11390.
Change-Id: I742c39c88591649276268327ea314e68d1de1845
Reviewed-on: https://go-review.googlesource.com/17493
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The 387 implementation is less accurate and slower.
name old time/op new time/op delta
Exp-8 29.7ns ± 2% 24.0ns ± 2% -19.08% (p=0.000 n=10+10)
This makes Gamma more accurate too.
Change-Id: Iad33b9cce0b087ccbce3e08ba7a6d285c4999d02
Reviewed-on: https://go-review.googlesource.com/30230
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The documentation for doc says:
> Doc prints the documentation comments associated with the item identified by its
> arguments (a package, const, func, type, var, or method) followed by a one-line
> summary of each of the first-level items "under" that item (package-level
> declarations for a package, methods for a type, etc.).
Certain variables (and constants, functions, and types) have value specifications
that are multiple lines long. Prior to this change, doc would print out all of the
lines necessary to display the value. This is inconsistent with the documented
behavior, which guarantees a one-line summary for all first-level items.
We fix this here by writing a general oneLineNode method that always returns
a one-line summary (guaranteed!) of any input node.
Packages like image/color/palette and unicode now become much
more readable since large slices are now a single line.
$ go doc image/color/palette
<<<
// Before:
var Plan9 = []color.Color{
color.RGBA{0x00, 0x00, 0x00, 0xff},
color.RGBA{0x00, 0x00, 0x44, 0xff},
color.RGBA{0x00, 0x00, 0x88, 0xff},
... // Hundreds of more lines!
}
var WebSafe = []color.Color{
color.RGBA{0x00, 0x00, 0x00, 0xff},
color.RGBA{0x00, 0x00, 0x33, 0xff},
color.RGBA{0x00, 0x00, 0x66, 0xff},
... // Hundreds of more lines!
}
// After:
var Plan9 = []color.Color{ ... }
var WebSafe = []color.Color{ ... }
>>>
In order to test this, I ran `go doc` and `go doc -u` on all of the
standard library packages and diff'd the output with and without the
change to ensure that all differences were intended.
Fixes#13072
Change-Id: Ida10b7796b7e4e174a929b55c60813a9eb7158fe
Reviewed-on: https://go-review.googlesource.com/25420
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
For now, we also accept "type p = p.T" (using = instead of =>, for
type aliases only), so we can experiment with an approach that only
uses type aliases. This concession is implemened in the parser.
For #16339
Change-Id: I88b5522a8b6cfc2e97ca146ede8b32af340220f8
Reviewed-on: https://go-review.googlesource.com/30211
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Remove the use of io.ReadAll in http.parsePostForm to avoid converting
the whole input from []byte to string and not performing well
space-allocated-wise.
Instead a new function called parsePostFormURLEncoded is used and is
fed directly an io.Reader that is parsed using a bufio.Reader.
Benchmark:
name old time/op new time/op delta
PostQuery-4 2.90µs ± 6% 2.82µs ± 4% ~ (p=0.094 n=9+9)
name old alloc/op new alloc/op delta
PostQuery-4 1.05kB ± 0% 0.90kB ± 0% -14.49% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
PostQuery-4 6.00 ± 0% 7.00 ± 0% +16.67% (p=0.000 n=10+10)
Fixes#14655
Change-Id: I112c263d4221d959ed6153cfe88bc57a2aa8ea73
Reviewed-on: https://go-review.googlesource.com/20301
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Todd originally set cmpDepth to 4. Quoting:
I picked a depth of 4 by timing tests of `go tool compile arithConst_ssa.go` and `go test -c net/http`.
3.89 / 3.92 CL w/cmpDepth = 1
3.78 / 3.92 CL w/cmpDepth = 2
3.44 / 3.96 CL w/cmpDepth = 3
3.29 / 3.9 CL w/cmpDepth = 4
3.3 / 3.93 CL w/cmpDepth = 5
3.29 / 3.92 CL w/cmpDepth = 10
I don't see the same behavior now, differences in those two benchmarks
are in the noise (between 1 and 4).
In issue 17127, CSE takes a really long time. Lowering cmpDepth
from 4 to 1 lowers compile time from 8 minutes to 1 minute.
Fixes#17127
Change-Id: I6dc544bbcf2a9dca73637d0182d3de1a5ae6c944
Reviewed-on: https://go-review.googlesource.com/30257
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Does not pass toolstash, but only because it causes ATYPE instructions
to be emitted in a different order, and it avoids emitting type
metadata for unused variables.
Change-Id: I3ec8f66a40b5af9213e0d6e852b267a8dd995838
Reviewed-on: https://go-review.googlesource.com/30217
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is a backwards-compatible language change.
Per the proposal (#16085), the rules for conversions are relaxed
such that struct tags in any of the structs involved in the conversion
are ignored (recursively).
Because this is loosening the existing rules, code that compiled so
far will continue to compile.
For #16085.
Fixes#6858.
Change-Id: I0feef651582db5f23046a2331fc3f179ae577c45
Reviewed-on: https://go-review.googlesource.com/24190
Reviewed-by: Russ Cox <rsc@golang.org>
Identify live stack variables during SSA and compute the stack frame
layout earlier so that we can emit instructions with the correct
offsets upfront.
Passes toolstash/buildall.
Change-Id: I191100dba274f1e364a15bdcfdc1d1466cdd1db5
Reviewed-on: https://go-review.googlesource.com/30216
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, it separates comments from rest of the AST. This causes problems when
long counter increment statements are added before compiler directives.
See Issue #17315.
This change moves comments handling into AST Visitor so that when printer prints
code from AST, position of compiler directives relative to the associated function
is preserved.
Tested with https://gist.github.com/dhananjay92/837df6bc1f171b1350f85d7a7d59ca1e
and unit test.
Fixes#17315
Change-Id: I61a80332fc1923de6fc59ff63b953671598071fa
Reviewed-on: https://go-review.googlesource.com/30161
Reviewed-by: Rob Pike <r@golang.org>
Fold MOVDaddr ops into MOVXstorezero ops.
Also fold ADDconst into MOVDaddr so we're sure there isn't
(MOVDstorezero (ADDconst (MOVDaddr ..)))
Without this CL, we get:
v1 = MOVDaddr {s}
v2 = VARDEF {s}
v3 = MOVDstorezero v1 v2
The liveness pass thinks the MOVDaddr is a read of s, so s is
incorrectly thought to be live at the start of the function.
Fixes#17194
Change-Id: I2b4a2f13b12aa5b072941ee1c7b89f3793650cdc
Reviewed-on: https://go-review.googlesource.com/30086
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Michael Munday <munday@ca.ibm.com>
The aim is to make the decrypt() timing profile constant, irrespective of
the CBC padding length or correctness. The old algorithm, on valid padding,
would only MAC bytes up to the padding length threshold, making CBC
ciphersuites vulnerable to plaintext recovery attacks as presented in the
"Lucky Thirteen" paper.
The new algorithm Write()s to the MAC all supposed payload, performs a
constant time Sum()---which required implementing a constant time Sum() in
crypto/sha1, see the "Lucky Microseconds" paper---and then Write()s the rest
of the data. This is performed whether the padding is good or not.
This should have no explicit secret-dependent timings, but it does NOT
attempt to normalize memory accesses to prevent cache timing leaks.
Updates #13385
Change-Id: I15d91dc3cc6eefc1d44f317f72ff8feb0a9888f7
Reviewed-on: https://go-review.googlesource.com/18130
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
I avoided anywhere in the compiler or things which might be used by
the compiler in the future, since they need to build with Go 1.4.
I also avoided anywhere where there was no benefit to changing it.
I probably missed some.
Updates #16721
Change-Id: Ib3c895ff475c6dec2d4322393faaf8cb6a6d4956
Reviewed-on: https://go-review.googlesource.com/30250
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
This change switches the use of socket implementation from the
conventional SUS-based one to the latest POSIX-based one to make
socket control message work correctly on Solaris.
It looks like those two implementations, Socket over TLI/XTI and
Socket, have different semantics in details but it wouldn't hurt
the existing applications because the exposed syscall API doesn't
support socket properties related to such a protocol independent
application framework.
Fixes#7402.
Change-Id: I45a4e782d606bfbebe1404086c50a8c69af53461
Reviewed-on: https://go-review.googlesource.com/30171
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reversed, indexed and multi-register stores/loads cannot accept SB
inputs. Therefore if one of these Ops is an input to a rule any
pointer that is an argument to that Op cannot be OpSB.
Change-Id: Ib8048362d1c6277122afec0d13a1c905290d69cb
Reviewed-on: https://go-review.googlesource.com/30131
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
In particular, it wasn't obvious that some values are special (unless
you also found those special values), so document that it isn't
necessarily a hash value.
Change-Id: Iff292822b44408239e26cd882dc07be6df2c1d38
Reviewed-on: https://go-review.googlesource.com/30143
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
gcDumpObject is often used on a stack pointer (for example, when
checkmark finds an unmarked object on the stack), but since stack
spans don't have an elemsize, it doesn't print any of the memory from
the frame. Make it at least slightly more useful by printing
everything between obj and obj+off (inclusive). While we're here, also
print out the span state.
Change-Id: I51be064ea8791b4a365865bfdc7afa7b5aaecfbd
Reviewed-on: https://go-review.googlesource.com/30142
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently span states are untyped constants and the field is just a
uint8. Make this more type-safe by introducing a type for the span
state.
Change-Id: I369bf59fe6e8234475f4921611424fceb7d0a6de
Reviewed-on: https://go-review.googlesource.com/30141
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Should be more asymptotically happy.
We process each variable in turn to find all the
locations where it needs a phi (the dominance frontier
of all of its definitions). Then we add all those phis.
This takes O(n * #variables), although hopefully much less.
Then we do a single tree walk to match all the
FwdRefs with the nearest definition or phi.
This takes O(n) time.
The one remaining inefficiency is that we might end up
introducing a bunch of dead phis in the first step.
A TODO is to introduce phis only where they might be
used by a read.
The old algorithm is still faster on small functions,
so there's a cutover size (currently 500 blocks).
This algorithm supercedes the David's sparse phi
placement algorithm for large functions.
Lowers compile time of example from #14934 from
~10 sec to ~4 sec.
Lowers compile time of example from #16361 from
~4.5 sec to ~3 sec.
Lowers #16407 from ~20 min to ~30 sec.
Update #14934
Update #16361Fixes#16407
Change-Id: I1cff6364e1623c143190b6a924d7599e309db58f
Reviewed-on: https://go-review.googlesource.com/30163
Reviewed-by: David Chase <drchase@google.com>
Allows users to override the default secure protocol list by setting the
GIT_ALLOW_PROTOCOL environment variable.
Addresses #17299 for vcs.go.
Change-Id: If575861d2b1b04b59029fed7e5d12b49690af50a
Reviewed-on: https://go-review.googlesource.com/30135
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Update gc liveness to remove special conservative treatment
of ambiguously live vars, since there is no longer a need to
protect against GCDEBUG=gcdead.
Change-Id: Id6e2d03218f7d67911e8436d283005a124e6957f
Reviewed-on: https://go-review.googlesource.com/24896
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
All implementations have always implemented this behavior, it's
tested, and it's depended on by other packages. (notably, by net/http)
The one exception is Plan 9 which doesn't support I/O deadlines at all
(tracked in #11932). As a result, a bunch of tests fail on plan9
(#7237). But once Plan 9 adds I/O deadline support, it'll also need
this behavior.
Change-Id: Idb71767f0c99279c66dce29f7bdc78ef467e47aa
Reviewed-on: https://go-review.googlesource.com/30164
Reviewed-by: Sam Whited <sam@samwhited.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently the SetFinalizer documentation makes a strong claim that
SetFinalizer will panic if the pointer is not to an object allocated
by calling new, to a composite literal, or to a local variable. This
is not true. For example, it doesn't panic when passed the address of
a package-level variable. Nor can we practically make it true. For
example, we can't distinguish between passing a pointer to a composite
literal and passing a pointer to its first field.
Hence, weaken the guarantee to say that it "may" panic.
Updates #17311. (Might fix it, depending on what we want to do with
package-level variables.)
Change-Id: I1c68ea9d0a5bbd3dd1b7ce329d92b0f05e2e0877
Reviewed-on: https://go-review.googlesource.com/30137
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This adds Uint64 methods to Rand and rngSource.
Rand.Uint64 uses Source.Uint64 directly if it is present.
rngSource.Uint64 provides access to all 64 bits generated by the
underlying ALFG. To ensure high seed quality a 64th bit has been added
to all elements of the array of "cooked" random numbers that are used
for seeding. gen_cooked.go generates both the 63 bit and 64 bit array.
Fixes#4254
Change-Id: I22855618ac69abae3d2799b3e7e59996d4c5a4b1
Reviewed-on: https://go-review.googlesource.com/27253
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The code comment mixed up max and min. In this case, min is correct
because this entropy is only used to make the signature scheme
probabilistic. (I.e. if it were fixed then the scheme would still be
secure except that key.Sign(foo) would always give the same result for a
fixed key and foo.)
For this purpose, 256-bits is plenty.
Fixes#16819.
Change-Id: I309bb312b775cf0c4b7463c980ba4b19ad412c36
Reviewed-on: https://go-review.googlesource.com/30153
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, if a certificate contains no names (that we parsed),
verification will return the confusing error:
x509: certificate is valid for , not example.com.
This change improves the error for that situation.
Fixes#16834.
Change-Id: I2ed9ed08298d7d50df758e503bdb55277449bf55
Reviewed-on: https://go-review.googlesource.com/30152
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#4215.
Fixes#6750.
Improves the error message for wrong number of arguments by comparing
the signature of the return call site arguments, versus the function's
expected return arguments.
In this CL, the signature representation of:
+ ideal numbers(TIDEAL) ie float*, complex*, rune, int is
"number" instead of "untyped number".
+ idealstring is "string" instead of "untyped string".
+ idealbool is "bool" instead of "untyped bool".
However, the representation of other types remains as the compiler
would produce.
* Example 1(in the error messages, if all lines were printed):
$ cat main.go && go run main.go
package main
func foo() (int, int) {
return 2.3
}
func foo2() {
return int(2), 2
}
func foo3(v int) (a, b, c, d int) {
if v >= 5 {
return 1
}
return 2, 3
}
func foo4(name string) (string, int) {
switch name {
case "cow":
return "moo"
case "dog":
return "dog", 10, true
case "fish":
return ""
default:
return "lizard", 10
}
}
type S int
type T string
type U float64
func foo5() (S, T, U) {
if false {
return ""
} else {
ptr := new(T)
return ptr
}
return new(S), 12.34, 1 + 0i, 'r', true
}
func foo6() (T, string) {
return "T"
}
./issue4215.go:4: not enough arguments to return, got (number) want (int, int)
./issue4215.go:8: too many arguments to return, got (int, number) want ()
./issue4215.go:13: not enough arguments to return, got (number) want (int, int, int, int)
./issue4215.go:15: not enough arguments to return, got (number, number) want (int, int, int, int)
./issue4215.go:21: not enough arguments to return, got (string) want (string, int)
./issue4215.go:23: too many arguments to return, got (string, number, bool) want (string, int)
./issue4215.go:25: not enough arguments to return, got (string) want (string, int)
./issue4215.go:37: not enough arguments to return, got (string) want (S, T, U)
./issue4215.go:40: not enough arguments to return, got (*T) want (S, T, U)
./issue4215.go:42: too many arguments to return, got (*S, number, number, number, bool) want (S, T, U)
./issue4215.go:46: not enough arguments to return, got (string) want (T, string)
./issue4215.go:46: too many errors
* Example 2:
$ cat 6750.go && go run 6750.go
package main
import "fmt"
func printmany(nums ...int) {
for i, n := range nums {
fmt.Printf("%d: %d\n", i, n)
}
fmt.Printf("\n")
}
func main() {
printmany(1, 2, 3)
printmany([]int{1, 2, 3}...)
printmany(1, "abc", []int{2, 3}...)
}
./issue6750.go:15: too many arguments in call to printmany, got (number, string, []int) want (...int)
Change-Id: I6fdce78553ae81770840070e2c975d3e3c83d5d8
Reviewed-on: https://go-review.googlesource.com/25156
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Since there's no aspect of key logging that OpenSSL can check for us,
the tests for it might as well just connect to another goroutine as this
is lower-maintainance.
Change-Id: I746d1dbad1b4bbfc8ef6ccf136ee4824dbda021e
Reviewed-on: https://go-review.googlesource.com/30089
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joonas Kuorilehto <joneskoo@derbian.fi>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Panic if Repeat is given a negative count or
if the value of (len(*) * count) is detected
to overflow.
We panic because we cannot change the
signature of Repeat to return an error.
Fixes#16237
Change-Id: I9f5ba031a5b8533db0582d7a672ffb715143f3fb
Reviewed-on: https://go-review.googlesource.com/29954
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In FreeBSD 10.0, the _umtx_op syscall was changed to allow sleeping on
any supported clock, but the default clock was switched from a monotonic
clock to CLOCK_REALTIME.
Prior to 10.0, the __umtx_op_wait* functions ignored the fourth argument
to _umtx_op (uaddr1), expected the fifth argument (uaddr2) to be a
struct timespec pointer, and used a monotonic clock (nanouptime(9)) for
timeout calculations.
Since 10.0, if callers want a clock other than CLOCK_REALTIME, they must
call _umtx_op with uaddr1 set to a value greater than sizeof(struct
timespec), and with uaddr2 as pointer to a struct _umtx_time, rather
than a timespec. Callers can set the _clockid field of the struct
_umtx_time to request the clock they want.
The relevant FreeBSD commit:
https://svnweb.freebsd.org/base?view=revision&revision=232144Fixes#17168
Change-Id: I3dd7b32b683622b8d7b4a6a8f9eb56401bed6bdf
Reviewed-on: https://go-review.googlesource.com/30154
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Update cross-reference in the comment for runtimeTimer to point to the
new go file instead of the old .h file.
Change-Id: Iddb3614c41e1989096d6caf77d6c0d5781005181
Reviewed-on: https://go-review.googlesource.com/30157
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In golang.org/cl/22354, we added functionality to group functions under the
type that they construct to. In this CL, we extend the same concept to
constants and variables. This makes the doc tool more consistent with what
the godoc website does.
$ go doc reflect | egrep "ChanDir|Kind|SelectDir"
<<<
// Before:
const RecvDir ChanDir = 1 << iota ...
const Invalid Kind = iota ...
type ChanDir int
type Kind uint
type SelectDir int
func ChanOf(dir ChanDir, t Type) Type
// After:
type ChanDir int
const RecvDir ChanDir = 1 << iota ...
type Kind uint
const Invalid Kind = iota ...
type SelectDir int
const SelectSend SelectDir ...
func ChanOf(dir ChanDir, t Type) Type
>>>
Furthermore, a fix was made to ensure that the type was printed in constant
blocks when the iota was applied on an unexported field.
$ go doc reflect SelectSend
<<<
// Before:
const (
SelectSend // case Chan <- Send
SelectRecv // case <-Chan:
SelectDefault // default
)
// After:
const (
SelectSend SelectDir // case Chan <- Send
SelectRecv // case <-Chan:
SelectDefault // default
)
>>>
Fixes#16569
Change-Id: I26124c3d19e50caf9742bb936803a665e0fa6512
Reviewed-on: https://go-review.googlesource.com/25419
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
readRecord was not returning early if c.in.decrypt failed and ran
through the rest of the function. It does set c.in.err, so the various
checks in the callers do ultimately notice before acting on the result,
but we should avoid running the rest of the function at all.
Also rename 'err' to 'alertValue' since it isn't actually an error.
Change-Id: I6660924716a85af704bd3fe81521b34766238695
Reviewed-on: https://go-review.googlesource.com/24709
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
CL 20909 gave Mpint methods nice go-like names, but it
didn't update the names in the error strings. Fix them.
Same for a couple of Mpflt methods.
Change-Id: I9c99653d4b922e32fd5ba18aba768a589a4c7869
Reviewed-on: https://go-review.googlesource.com/30091
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This commit makes the process of load/store merging more incremental
for both big and little endian operations. It also adds support for
32-bit shifts (needed to merge 16- and 32-bit loads/stores).
In addition, the merging of little endian stores is now supported.
Little endian stores are now up to 30 times faster.
Change-Id: Iefdd81eda4a65b335f23c3ff222146540083ad9c
Reviewed-on: https://go-review.googlesource.com/29956
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Convconst is not used in the new backend, and all its callers
were deleted in CL 29168 (cmd/compile: delete lots of the legacy
backend). iconv was an helper function for Convconst.
Updates #16357
Change-Id: I65c7345586d7af81cdc2fb09c68f744ffb161a17
Reviewed-on: https://go-review.googlesource.com/30090
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates bundled http2 to x/net git rev a333c53 for:
http2: add Transport support for IdleConnTimeout
https://golang.org/cl/30075
And add tests.
The bundled http2 also includes a change adding a Ping method to
http2.ClientConn, but that type isn't exposed in the standard
library. Nevertheless, the code gets compiled and adds a dependency on
"crypto/rand", requiring an update to go/build's dependency
test. Because net/http already depends on crypto/tls, which uses
crypto/rand, it's not really a new dependency.
Fixes#16808
Change-Id: I1ec8666ea74762f27c70a6f30a366a6647f923f7
Reviewed-on: https://go-review.googlesource.com/30078
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The endcgo function call is currently deferred in case a cgo
callback into Go panics and unwinds through cgocall. Typical cgo
calls do not have callbacks into Go, and even fewer panic, so we
pay the cost of this defer for no typical benefit.
Amazingly, there is another defer on the cgocallback path also used
to cleanup in case the Go code called by cgo panics. This CL folds
the first defer into the second, to reduce the cost of typical cgo
calls.
This reduces the overhead for a no-op cgo call significantly:
name old time/op new time/op delta
CgoNoop-8 93.5ns ± 0% 51.1ns ± 1% -45.34% (p=0.016 n=4+5)
The total effect between Go 1.7 and 1.8 is even greater, as CL 29656
reduced the cost of defer recently. Hopefully a future Go release
will drop the cost of defer to nothing, making this optimization
unnecessary. But until then, this is nice.
Change-Id: Id1a5648f687a87001d95bec6842e4054bd20ee4f
Reviewed-on: https://go-review.googlesource.com/30080
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Consistently access function parameters using the FP pseudo-register
instead of SP (e.g., x+0(FP) instead of x+4(SP) or x+8(SP), depending
on register size). Two reasons: 1) doc/asm says the SP pseudo-register
should use negative offsets in the range [-framesize, 0), and 2)
cmd/vet only validates parameter offsets when indexed from the FP
pseudo-register.
No binary changes to the compiled object files for any of the affected
package/OS/arch combinations.
Change-Id: I0efc6079bc7519fcea588c114ec6a39b245d68b0
Reviewed-on: https://go-review.googlesource.com/30085
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
At this point in the compiler we haven't assigned Xoffset values for
PAUTO variables anyway, so just immediately store the stack offsets
into Xoffset rather than into a global map.
Change-Id: I61eb471c857c8b145fd0895cbd98fd4e8d3c3365
Reviewed-on: https://go-review.googlesource.com/30081
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
There are only three Prog types that we were creating with an OLITERAL
Node: ATEXT, ATYPE, and AFUNCDATA. ATEXT's value we later overwrite in
defframe, and ATYPE's we don't even need. AFUNCDATA only needs integer
constants, so get rid of all the non-int constant logic and skip
creating a Node representation for the constant.
While here, there are a few other Naddr code paths that are no longer
needed, so turn those into Fatalfs.
Passes toolstash/buildall.
Change-Id: I4cc9b92c3011890afd4f31ebeba8b1b42b753cab
Reviewed-on: https://go-review.googlesource.com/30074
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Naddr used to translate PFUNC Nodes into references to the function
literal wrapper, and then Afunclit could be used to rewrite it to
reference the function text itself. But now everywhere we use Naddr on
PFUNC Nodes, we immediately call Afunclit anyway. So just merge
Afunclit's behavior into Naddr.
Passes toolstash/buildall.
Change-Id: If2ca6d7f314c1a0711df9b8209aace16ba4b8bc0
Reviewed-on: https://go-review.googlesource.com/30073
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
To prevent leaking connections, close any open Rows when the
context is cancelled. Also enforce context cancel while reading
rows off of the wire.
Change-Id: I62237ecdb7d250d6734f6ce3d2b0bcb16dc6fda7
Reviewed-on: https://go-review.googlesource.com/29957
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fix an old TODO and use atomic.Value for holding the Transport's
alternate protocol map. It is very frequently accessed and almost
never set or updated.
Change-Id: Ic5a71c504bdac76678114c6390d1fc0673e07aa9
Reviewed-on: https://go-review.googlesource.com/29967
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently any script tag is treated as a javascript container, although
<script type="text/template"> must not be. Check "type" attribute of
"script" tag. If it is present and it is not a JS MIME type, do not
transition to elementScript state.
Fixes#12149, where // inside text template was treated as regexp.
Fixes#6701
Change-Id: I8fc9e504f7280bdd800f40383c061853665ac8a2
Reviewed-on: https://go-review.googlesource.com/14336
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
All other architectures merge stack-zeroing ranges if there are at
most two pointers/registers of memory between them, but x86 is
erroneously coded to require *exactly* two.
Shaves a tiny amount of text size off cmd/go when building for
GOARCH=386 and eliminates an unnecessary inconsistency between x86's
defframe and the other GOARCHes'.
text data bss dec hex filename
5241015 191051 93336 5525402 544f9a go.before
5240224 191051 93336 5524611 544c83 go.after
Change-Id: Ib15ec8c07bca11e824640f0ab32abfc4bb160496
Reviewed-on: https://go-review.googlesource.com/30050
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Introduced in CL 9263 (prepare to unexport gc.Mp*) and CL 9267
(prepare Node.Val to be unexported), their only callers were in
the old backend and all got deleted in CL 29168 (cmd/compile:
delete lots of the legacy backend).
Update #16357
Change-Id: I0a5d76b98b418e8ec0984c033c3bc0ac3fc5f38a
Reviewed-on: https://go-review.googlesource.com/29997
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Move all parse/format related functionality into strconv.go
and thoroughly test them. This also reduces the amount of noise
inside reader.go and writer.go.
There was zero functionality change other than moving code around.
Change-Id: I3bc288d10c20ebb3814b30b75d8acd7be62b85d7
Reviewed-on: https://go-review.googlesource.com/28470
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
RFC 6265, section 4.2.2 says:
<<<
Although cookies are serialized linearly in the Cookie header,
servers SHOULD NOT rely upon the serialization order. In particular,
if the Cookie header contains two cookies with the same name (e.g.,
that were set with different Path or Domain attributes), servers
SHOULD NOT rely upon the order in which these cookies appear in the
header.
>>>
This statement seems to indicate that cookies should conceptually
be thought of as a map of keys to sets of values (map[key][]value).
However, in practice, everyone pretty much treats cookies as a
map[key]value and the API for Request.Cookie seems to indicate that.
We should update the documentation for Request.Cookie to warn the
user what happens when there is are multiple cookies with the same
key. I deliberately did not want to say *which* cookie is returned.
Change-Id: Id3e0e24b2b14ca2d9ea8b13f82ba739edaa71cf0
Reviewed-on: https://go-review.googlesource.com/29364
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In https://golang.org/cl/28951 I cleaned up the lookupProtocol and
lookupPort paths to be consistently case-insensitive across operating
systems and to share the same baked-in maps of port & proto values
that can be relied on to exist on any platform.
I missed the fallback to the baked-in maps on Windows, though, which
broke Windows XP. This should fix it.
Fixes#17175
Change-Id: Iecd434fb684304137ee27f5521cfaa8c351a1bde
Reviewed-on: https://go-review.googlesource.com/29968
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
IntLiteral was only called by the gins functions in
cmd/compile/internal/{arm64,mips64,ppc64}/gsubr.go
but CL 29220 (cmd/compile: remove gins) deleted them,
so IntLiteral is now unused.
Change-Id: I2652b6d2ace6fdadc1982f65e749f3982513371e
Reviewed-on: https://go-review.googlesource.com/29996
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Remove duplicate vars, commented out code and duplicate lines.
When choosing between 2 aliases, on with more uses was chosen.
Change-Id: I7bc15f1693de3f6d378cef9c09469970a659db40
Reviewed-on: https://go-review.googlesource.com/29152
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change adds support for decoding and encoding the bool type. The
encoding is a single byte, with a zero value for false and a non-zero
value for true.
Closes#16856.
Change-Id: I1d1114b320263691473bb100cad0f380e0204186
Reviewed-on: https://go-review.googlesource.com/28514
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
This change reverts CL 18814 which is a workaroud for older DragonFly
BSD kernels, and fixes#13945 and #13947 in a more general way the
same as other platforms except NetBSD.
This is a followup to CL 29491.
Updates #16329.
Change-Id: I771670bc672c827f2b3dbc7fd7417c49897cb991
Reviewed-on: https://go-review.googlesource.com/29971
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change setsig, setsigstack, getsig, raise, raiseproc to take uint32 for
signal number parameter, as that is the type mostly used for signal
numbers. Same for dieFromSignal, sigInstallGoHandler, raisebadsignal.
Remove setsig restart parameter, as it is always either true or
irrelevant.
Don't check the handler in setsigstack, as the only caller does that
anyhow.
Don't bother to convert the handler from sigtramp to sighandler in
getsig, as it will never be called when the handler is sigtramp or
sighandler.
Don't check the return value from rt_sigaction in the GNU/Linux version
of setsigstack; no other setsigstack checks it, and it never fails.
Change-Id: I6bbd677e048a77eddf974dd3d017bc3c560fbd48
Reviewed-on: https://go-review.googlesource.com/29953
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change replaces the use of CryptGenRandom with RtlGenRandom in
Windows to generate cryptographically random numbers during process
startup. RtlGenRandom uses the same RNG as CryptGenRandom, but it has many
fewer DLL dependencies and so does not affect process startup time as
much.
This makes running simple Go program on my computers faster.
Windows XP:
benchmark old ns/op new ns/op delta
BenchmarkRunningGoProgram-2 47408573 10784148 -77.25%
Windows 7 (VM):
benchmark old ns/op new ns/op delta
BenchmarkRunningGoProgram 16260390 12792150 -21.33%
Windows 7:
benchmark old ns/op new ns/op delta
BenchmarkRunningGoProgram-2 13600778 10050574 -26.10%
Fixes#15589
Change-Id: I2816239a2056e3d4a6dcd86a6fa2bb619c6008fe
Reviewed-on: https://go-review.googlesource.com/29700
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Documentation made reference to an unknown entity "DisableHTMLEscaping,"
but I think it actually meant the method "Encoder.SetEscapeHTML."
Fixes#17255
Change-Id: I18fda76f8066110caef85fd33698de83d632e646
Reviewed-on: https://go-review.googlesource.com/29931
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The OS-independent sigmask type was not pulling its weight. Replace it
with the OS-dependent sigset type. This requires adding an OS-specific
sigaddset function, but permits removing the OS-specific sigmaskToSigset
function.
Change-Id: I43307b512b0264ec291baadaea902f05ce212305
Reviewed-on: https://go-review.googlesource.com/29950
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Add context methods to sql and sql/driver methods. If
the driver doesn't implement context methods the connection
pool will still handle timeouts when a query fails to return
in time or when a connection is not available from the pool
in time.
There will be a follow-up CL that will add support for
context values that specify transaction levels and modes
that a driver can use.
Fixes#15123
Change-Id: Ia99f3957aa3f177b23044dd99d4ec217491a30a7
Reviewed-on: https://go-review.googlesource.com/29381
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The SetFinalizer documentation states that
"The argument obj must be a pointer to an object allocated by calling
new or by taking the address of a composite literal."
which precludes pointers to local variables. According to a comment
on #6591, this case is expected to work. This CL updates the documentation
for SetFinalizer accordingly.
Fixes#6591
Change-Id: Id861b3436bc1c9521361ea2d51c1ce74a121c1af
Reviewed-on: https://go-review.googlesource.com/29592
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This commit makes the assembler frontend reorder the operands so that
they are in the order the backend expects. The index should be first
for consistency with the other vector instructions.
Before this commit no operand order would have been accepted so this
isn't a breaking change.
Change-Id: I188d57eeb338d27fa1fa6845de0d6d1521b7a6c3
Reviewed-on: https://go-review.googlesource.com/29855
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
These instructions are the same as BLT and BLE except that they
also branch if the 'unordered' bit is set in the condition code.
They are already used by the SSA backend. This change allows them
to be used in hand-written assembly code.
Change-Id: Ie9b5985a5e87ea22e8043567a286e09dce16a2db
Reviewed-on: https://go-review.googlesource.com/29930
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Use the A{,G}HI instructions where possible (4 bytes instead of 6 bytes
for A{,G}FI). Also, use 32-bit operations where appropriate for
multiplication.
Change-Id: I4041781cda26be52b54e4804a9e71552310762d0
Reviewed-on: https://go-review.googlesource.com/29733
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This optimizes deferproc and deferreturn in various ways.
The most important optimization is that it more carefully arranges to
prevent preemption or stack growth. Currently we do this by switching
to the system stack on every deferproc and every deferreturn. While we
need to be on the system stack for the slow path of allocating and
freeing defers, in the common case we can fit in the nosplit stack.
Hence, this change pushes the system stack switch down into the slow
paths and makes everything now exposed to the user stack nosplit. This
also eliminates the need for various acquirem/releasem pairs, since we
are now preventing preemption by preventing stack split checks.
As another smaller optimization, we special case the common cases of
zero-sized and pointer-sized defer frames to respectively skip the
copy and perform the copy in line instead of calling memmove.
This speeds up the runtime defer benchmark by 42%:
name old time/op new time/op delta
Defer-4 75.1ns ± 1% 43.3ns ± 1% -42.31% (p=0.000 n=8+10)
In reality, this speeds up defer by about 2.2X. The two benchmarks
below compare a Lock/defer Unlock pair (DeferLock) with a Lock/Unlock
pair (NoDeferLock). NoDeferLock establishes a baseline cost, so these
two benchmarks together show that this change reduces the overhead of
defer from 61.4ns to 27.9ns.
name old time/op new time/op delta
DeferLock-4 77.4ns ± 1% 43.9ns ± 1% -43.31% (p=0.000 n=10+10)
NoDeferLock-4 16.0ns ± 0% 15.9ns ± 0% -0.39% (p=0.000 n=9+8)
This also shaves 34ns off cgo calls:
name old time/op new time/op delta
CgoNoop-4 122ns ± 1% 88.3ns ± 1% -27.72% (p=0.000 n=8+9)
Updates #14939, #16051.
Change-Id: I2baa0dea378b7e4efebbee8fca919a97d5e15f38
Reviewed-on: https://go-review.googlesource.com/29656
Reviewed-by: Keith Randall <khr@golang.org>
This makes it possible to inline getcallersp. getcallersp is on the
hot path of defers, so this slightly speeds up defer:
name old time/op new time/op delta
Defer-4 78.3ns ± 2% 75.1ns ± 1% -4.00% (p=0.000 n=9+8)
Updates #14939.
Change-Id: Icc1cc4cd2f0a81fc4c8344432d0b2e783accacdd
Reviewed-on: https://go-review.googlesource.com/29655
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The big documentation comment at the top of malloc.go has gotten
woefully out of date. Update it.
Change-Id: Ibdb1bdcfdd707a6dc9db79d0633a36a28882301b
Reviewed-on: https://go-review.googlesource.com/29731
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
This documents all fields in MemStats and more clearly documents where
mstats differs from MemStats.
Fixes#15849.
Change-Id: Ie09374bcdb3a5fdd2d25fe4bba836aaae92cb1dd
Reviewed-on: https://go-review.googlesource.com/28972
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
We used to compute an estimate of the reachable heap size that was
different from the marked heap size. This ultimately caused more
problems than it solved, so we pulled it out, but memstats still has
both heap_reachable and heap_marked, and there are some leftover TODOs
about the problems with this estimate.
Clean this up by eliminating heap_reachable in favor of heap_marked
and deleting the stale TODOs.
Change-Id: I713bc20a7c90683d2b43ff63c0b21a440269cc4d
Reviewed-on: https://go-review.googlesource.com/29271
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Back in Go 1.4, memstats.next_gc was both the heap size at which GC
would trigger, and the size GC kept the heap under. When we switched
to concurrent GC in Go 1.5, we got somewhat confused and made this
variable the trigger heap size, while gcController.heapGoal became the
goal heap size.
memstats.next_gc is exposed to the user via MemStats.NextGC, while
gcController.heapGoal is not. This is unfortunate because 1) the heap
goal is far more useful for diagnostics, and 2) the trigger heap size
is just part of the GC trigger heuristic, which means it wouldn't be
useful to an application even if it tried to use it.
We never noticed this mess because MemStats.NextGC is practically
undocumented. Now that we're trying to document MemStats, it became
clear that this field had diverged from its original usefulness.
Clean up this mess by shuffling things back around so that next_gc is
the goal heap size and the new (unexposed) memstats.gc_trigger field
is the trigger heap size. This eliminates gcController.heapGoal.
Updates #15849.
Change-Id: I2cbbd43b1d78bdf613cb43f53488bd63913189b7
Reviewed-on: https://go-review.googlesource.com/29270
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
All the variants that sets the new signal mask in minit do the same
thing, so merge them. This requires an OS-specific sigdelset function;
the function already exists for linux, and is now added for other OS's.
Change-Id: Ie96f6f02e2cf09c43005085985a078bd9581f670
Reviewed-on: https://go-review.googlesource.com/29771
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Combine the various versions of sigtrampgo into a single function in
signal_unix.go. This requires defining a fixsigcode method on sigctxt
for all operating systems; it only does something on Darwin. This also
requires changing the darwin/amd64 signal handler to call sigreturn
itself, rather than relying on sigtrampgo to call sigreturn for it. We
can then drop the Darwin sigreturn function, as it is no longer used.
Change-Id: I5a0b9d2d2c141957e151b41e694efeb20e4b4b9a
Reviewed-on: https://go-review.googlesource.com/29761
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When processing a fallthrough, the casebody function in swt.go
checks that the last statement has indeed Op == OXFALL (not-processed
fallthrough) before setting it to OFALL (processed fallthrough).
Unfortunately, sometimes the fallthrough statement won't be in the
last node. For example, in
case 0:
return func() int {return 1}()
fallthrough
the compiler generates
autotmp_0 = (func literal)(); return autotmp_0; fallthrough; <node VARKILL>
with an OVARKILL node in the last position. casebody will find that
last.Op != OXFALL, won't mark the fallthrough as processed, and the
fallthrough line will cause a "fallthrough statement out of place" error.
To fix this, we change casebody so that it searches for the fallthrough
statement backwards in the statements list, without assuming that it'll
be in the last position.
Fixes#13262
Change-Id: I366c6caa7fd7442d365bd7a08cc66a552212d9b2
Reviewed-on: https://go-review.googlesource.com/22921
Run-TryBot: Quentin Smith <quentin@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
Change all Unix systems to use stackt for the alternate signal
stack (some were using sigaltstackt). Add OS-specific setSignalstackSP
function to handle different types for ss_sp field, and unify all
OS-specific signalstack functions into one. Unify handling of alternate
signal stack in OS-specific minit and sigtrampgo functions via new
functions minitSignalstack and setGsignalStack.
Change-Id: Idc316dc69b1dd725717acdf61a1cd8b9f33ed174
Reviewed-on: https://go-review.googlesource.com/29757
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently raceSymbolizeCode uses funcline, which is internal runtime
function which crashes on incorrect PCs. Use FileLine instead,
it is public and does not crash on invalid data.
Note: FileLine returns "?" file on failure. That string is not NUL-terminated,
so we need to additionally check what FileLine returns.
Fixes#17190
Change-Id: Ic6fbd4f0e68ddd52e9b2dd25e625b50adcb69a98
Reviewed-on: https://go-review.googlesource.com/29714
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Don't write line info for types, we don't have it.
Otherwise types look like:
type _Ctype_struct_cb struct {
//line :1
on_test *[0]byte
//line :1
}
Which is not useful. Moreover we never override source info,
so subsequent source code uses the same source info.
Moreover, empty file name makes compile emit no source debug info at all.
Update #17190
Change-Id: I7ae6fa4964520d7665743d340419b787df0b51e8
Reviewed-on: https://go-review.googlesource.com/29713
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
PC passed to racegostart is expected to be a return PC
of the go statement. Race runtime will subtract 1 from the PC
before symbolization. Passing start PC of a function is wrong.
Add sys.PCQuantum to the function start PC.
Update #17190
Change-Id: Ia504c49e79af84ed4ea360c2aea472b370ea8bf5
Reviewed-on: https://go-review.googlesource.com/29712
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This sentence is partially guilty why httptrace is considered as an
http.Client tracing package. Removing the mention.
Updates #17152.
Change-Id: I69f78a6e10817db933f44e464a949ae896e44ec6
Reviewed-on: https://go-review.googlesource.com/29755
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Replace all the Unix sighandler functions with a single instance.
Push the relatively small amount of processor-specific code into five
methods on sigctxt: sigpc, sigsp, siglr, fault, preparePanic.
(Some processors already had a fault method.)
Change-Id: Ib459412ff8f7e0f5ad06bfd43eb827c8b196fc32
Reviewed-on: https://go-review.googlesource.com/29752
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Unify the OS-specific versions of msigsave, msigrestore, sigblock,
updatesigmask, and unblocksig into single versions in signal_unix.go.
To do this, make sigprocmask work the same way on all systems, which
required adding a definition of sigprocmask for linux and openbsd.
Also add a single OS-specific function sigmaskToSigset.
Change-Id: I7cbf75131dddb57eeefe648ef845b0791404f785
Reviewed-on: https://go-review.googlesource.com/29689
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This CL turns some special section marker symbols into real symbols
laid out in the sections they mark. This is to deal with the fact
that dyld on OS X resolves the section marker symbols in any dlopen-ed
Go program to the original section marker symbols in the host program.
More details in a comment in cmd/link/internal/ld/data.go.
Change-Id: Ie9451cfbf06d0bdcccb9959219c791b829f3f771
Reviewed-on: https://go-review.googlesource.com/29394
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The 2-byte rule was firing before the 4-byte rule, preventing
the 4-byte rule from firing. Update the 4-byte rule to use
the results of the 2-byte rule instead.
Add some tests to make sure we don't regress again.
Fixes#17147
Change-Id: Icfeccd9f2b96450981086a52edd76afb3191410a
Reviewed-on: https://go-review.googlesource.com/29382
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Before this change a nil check on s390x could be scheduled after the
target pointer has been dereferenced.
Change-Id: I7ea40a4b52f975739f6db183a2794be4981c4e3d
Reviewed-on: https://go-review.googlesource.com/29730
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This adds the instructions frim, frip, and friz to the ppc64x
assembler for use in implementing the math.Floor, math.Ceil, and
math.Trunc functions to improve performance.
Fixes#17185
BenchmarkCeil-128 21.4 6.99 -67.34%
BenchmarkFloor-128 13.9 6.37 -54.17%
BenchmarkTrunc-128 12.7 6.33 -50.16%
Change-Id: I96131bd4e8c9c8dbafb25bfeb544cf9d2dbb4282
Reviewed-on: https://go-review.googlesource.com/29654
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Michael Munday <munday@ca.ibm.com>
Attempt to fix the linux-amd64-clang builder, which broke
with CL 29472.
Turns out pthread_yield is a non-portable Linux function, and
should have #define _GNU_SOURCE before #include <pthread.h>.
GCC doesn't complain about this, but Clang does:
./raceprof.go:44:3: warning: implicit declaration of function 'pthread_yield' is invalid in C99 [-Wimplicit-function-declaration]
(Though the error, while explicable, certainly could be clearer.)
There is a portable POSIX equivalent, sched_yield, so this
CL uses it instead.
Change-Id: I58ca7a3f73a2b3697712fdb02e72a8027c391169
Reviewed-on: https://go-review.googlesource.com/29675
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Instrumenting copy and append for the race detector changes them to call
different functions. In the runtime package the alternate functions are
not marked as nosplit. This caused a crash in the SIGPROF handler when
invoked on a non-Go thread in a program built with the race detector. In
some cases the handler can call copy, the race detector changed that to
a call to a non-nosplit function, the function tried to check the stack
guard, and crashed because it was running on a non-Go thread. The
SIGPROF handler is written carefully to avoid such problems, but hidden
function calls are difficult to avoid.
Fix this by changing the compiler to not instrument copy and append when
compiling the runtime package. Change the runtime package to add
explicit race checks for the only code I could find where copy is used
to write to user data (append is never used).
Change-Id: I11078a66c0aaa459a7d2b827b49f4147922050af
Reviewed-on: https://go-review.googlesource.com/29472
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
var x *X = ...
defer x.foo()
As part of the defer, we need to calculate &(*X).foo·f. This expression
is the address of the static closure that will call (*X).foo when a
pointer to that closure is used in a call/defer/go. This pointer is not
currently properly typed in SSA. It is a pointer type, but the base
type is nil, not a proper type.
This turns out not to be a problem currently because we never use the
type of these SSA values. But I'm trying to change that (to be able to
spill them) in CL 28391. To fix, use uint8 as the fake type of the
closure.
Change-Id: Ieee388089c9af398ed772ee8c815122c347cb633
Reviewed-on: https://go-review.googlesource.com/29444
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
On link-register machines we uses RET (sym), instead of JMP (sym),
for tail call (so the assembler knows and may rewrite it to
restore link register if necessary). Add RET to the analysis.
Fixes#17186.
Fixes#16016 on link-register machines.
Change-Id: I8690ac57dd9d49beeea76a5f291988e9a1d3afe5
Reviewed-on: https://go-review.googlesource.com/29570
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
After renegotiation support was added (af125a5193) it's possible for a
Write to block on a Read when racing to complete the handshake:
1. The Write determines that a handshake is needed and tries to
take the neccesary locks in the correct order.
2. The Read also determines that a handshake is needed and wins
the race to take the locks.
3. The Read goroutine completes the handshake and wins a race
to unlock and relock c.in, which it'll hold when waiting for
more network data.
If the application-level protocol requires the Write to complete before
data can be read then the system as a whole will deadlock.
Unfortunately it doesn't appear possible to reverse the locking order of
c.in and handshakeMutex because we might read a renegotiation request at
any point and need to be able to do a handshake without unlocking.
So this change adds a sync.Cond that indicates that a goroutine has
committed to doing a handshake. Other interested goroutines can wait on
that Cond when needed.
The test for this isn't great. I was able to reproduce the deadlock with
it only when building with -race. (Because -race happened to alter the
timing just enough.)
Fixes#17101.
Change-Id: I4e8757f7b82a84e46c9963a977d089f0fb675495
Reviewed-on: https://go-review.googlesource.com/29164
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change modifies URL.String to prepend "./" to a relative URL which
contains a colon in the first path segment.
Per RFC 3986 §4.2:
> A path segment that contains a colon character (e.g., "this:that")
> cannot be used as the first segment of a relative-path reference, as
> it would be mistaken for a scheme name. Such a segment must be
> preceded by a dot-segment (e.g., "./this:that") to make a relative-
> path reference.
https://go-review.googlesource.com/27440 corrects the behavior for http.FileServer,
but URL.String will still return an invalid URL. This CL reverts the changes to
http.FileServer as they are unnecessary with this fix.
Fixes#17184
Change-Id: I9211ae20f82c91b785d1b079b2cd766487d94225
Reviewed-on: https://go-review.googlesource.com/29610
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Abandoned earlier efforts to expose zero register,
but left it in numbering to decrease squirrelyness of
register allocator.
ISELrelOp used in code generation of bool := x relOp y.
Some patterns added to better elide zero case and
some sign extension.
Updates: #17109
Change-Id: Ida7839f0023ca8f0ffddc0545f0ac269e65b05d9
Reviewed-on: https://go-review.googlesource.com/29380
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This change reverts CL 18835 which is a workaroud for older DragonFly
BSD kernels, and fixes#14051, #14052 and #14067 in a more general way
the same as other platforms except NetBSD.
This change also bumps the minimum required version of DragonFly BSD
kernel to 4.4.4.
Fixes#16329.
Change-Id: I0b44b6afa675f5ed9523914226bd9ec4809ba5ae
Reviewed-on: https://go-review.googlesource.com/29491
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Some applications built with Go on ppc64x with external linking
can fail to link with relocation truncation errors if the elf
text section that is generated is larger than 2^26 bytes and that
section contains a call instruction (bl) which calls a function
beyond the limit addressable by the 24 bit field in the
instruction.
This solution consists of generating multiple text sections where
each is small enough to allow the GNU linker to resolve the calls
by generating long branch code where needed. Other changes were added
to handle differences in processing when multiple text sections exist.
Some adjustments were required to the computation of a method's address
when using the method offset table when there are multiple text sections.
The number of possible section headers was increased to allow for up
to 128 text sections. A test case was also added.
Fixes#15823.
Change-Id: If8117b0e0afb058cbc072258425a35aef2363c92
Reviewed-on: https://go-review.googlesource.com/27790
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The new Resolver type (a struct) has 9 Lookup methods, all taking a
context.Context.
There's now a new DefaultResolver global, like http's
DefaultTransport and DefaultClient.
net.Dialer now has an optional Resolver field to set the Resolver.
This also does finishes some resolver cleanup internally, deleting
lookupIPMerge and renaming lookupIPContext into Resolver.LookupIPAddr.
The Resolver currently doesn't let you tweak much, but it's a struct
specifically so we can add knobs in the future. Currently I just added
a bool to force the pure Go resolver. In the future we could let
people provide an interface to implement the methods, or add a Timeout
time.Duration, which would wrap all provided contexts in a
context.WithTimeout.
Fixes#16672
Change-Id: I7ba1f886704f06def7b6b5c4da9809db51bc1495
Reviewed-on: https://go-review.googlesource.com/29440
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These used to be necessary when racing with updates to the mark bit,
but since the mark bit is no longer in the bitmap and the checkmark is
only updated with the world stopped, we can now always use regular
writes to update the type information in the heap bitmap.
Somewhat surprisingly, this has basically no overall performance
effect beyond the usual noise, but it does clean up the code.
Change-Id: I3933d0b4c0bc1c9bcf6313613515c0b496212105
Reviewed-on: https://go-review.googlesource.com/29277
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
It is possible (and common) for Windows systems to use a different codepage
for console applications from that used on normal windowed application
(called ANSI codepage); for instance, most of the western Europe uses
CP850 for console (for backward compatibility with MS-DOS), while
windowed applications use a different codepage depending on the country
(eg: CP1252 aka Latin-1). The usage being changed with this commit is
specifically related to decoding input coming from the console, so the
previous usage of the ANSI codepage was wrong.
Also fixes an issue that previous did convert bytes as NFD. Go is
designed to handle single Unicode code point. This fix change behaivor
to NFC.
Fixes#16857.
Change-Id: I4f41ae83ece47321b6e9a79a2087ecbb8ac066dd
Reviewed-on: https://go-review.googlesource.com/27575
Reviewed-by: Hiroshi Ioka <hirochachacha@gmail.com>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Don't panic, crash, or return references to uninitialized memory when
ParseDirent is passed invalid input.
Move common dirent parsing to syscall.go with minimal platform-specific
functions in syscall_$GOOS.go.
Fixes#15653
Change-Id: I5602475e02321fe381064488401c14b33bec6886
Reviewed-on: https://go-review.googlesource.com/23780
Run-TryBot: Damien Neil <dneil@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Issue #17099 shows a failure that indicates we rescanned a stack twice
concurrently during mark termination, which suggests that the rescan
list became inconsistent. Add a simple check when we dequeue something
from the rescan list that it claims to be at the index where we found
it.
Change-Id: I6a267da4154a2e7b7d430cb4056e6bae978eaf62
Reviewed-on: https://go-review.googlesource.com/29280
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The comment block at the end of the heap profile includes *almost*
everything from MemStats. Add the missing fields. These are useful for
debugging RSS that has gone to GC-internal data structures.
Change-Id: I0ee8a918d49629e28fd8fd2bf6861c4529461c24
Reviewed-on: https://go-review.googlesource.com/29276
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
On ARM, DIV, DIVU, MOD, MODU are pseudo instructions that makes
runtime calls _div/_udiv/_mod/_umod, which themselves are wrappers
of udiv. The udiv function does the real thing.
Instead of generating these pseudo instructions, call to udiv
directly. This removes one layer of wrappers (which has an awkward
way of passing argument), and also allows combining DIV and MOD
if both results are needed.
Change-Id: I118afc3986db3a1daabb5c1e6e57430888c91817
Reviewed-on: https://go-review.googlesource.com/29390
Reviewed-by: David Chase <drchase@google.com>
This makes it possible for cmd/compile, when run with -dynlink on
darwin/amd64, to generate TLS_LE relocations which the linker then
turns into the appropriate PC-relative GOT load.
Change-Id: I1a71da432608bdb108ff66c22de600100209c873
Reviewed-on: https://go-review.googlesource.com/29393
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of using ctxt.Cursym, Errorf takes an explicit *Symbol
parameter. This removes most uses of Cursym and means the *Link
context object is needed in fewer parts of the linker.
All transformations done manually, as wiring Cursym is tricky.
Change-Id: Ief88b00b73904224675c0035684c3a84c19249d7
Reviewed-on: https://go-review.googlesource.com/29369
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Example on linux_amd64 for 'go tool vet -h':
Before:
Usage of /usr/local/go/pkg/tool/linux_amd64/vet:
After:
Usage of vet:
Change-Id: I11cb16b656bd097062d57a8c7441fbe66caaef78
Reviewed-on: https://go-review.googlesource.com/29294
Reviewed-by: Rob Pike <r@golang.org>
The code scanned for an integer after a decimal point, which
meant things could overflow if the number was very precise
(0.1234123412341234123412342134s). This fix changes the
parser to stop adding precision once we run out of bits, rather
than trigger an erroneous overflow.
We could parse durations using floating-point arithmetic,
but since the type is int64 and float64 has only has 53 bits
of precision, that would be imprecise.
Fixes#15011.
Change-Id: If85e22b8f6cef12475e221169bb8f493bb9eb590
Reviewed-on: https://go-review.googlesource.com/29338
Reviewed-by: Costin Chirvasuta <costinc@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The current implementation for Power architecture does not include the vector
(Altivec) registers. This adds the 32 VMX registers and the most commonly used
instructions: X-form loads/stores; VX-form logical operations, add/sub,
rotate/shift, count, splat, SHA Sigma and AES cipher; VC-form compare; and
VA-form permute, shift, add/sub and select.
Fixes#15619
Change-Id: I544b990631726e8fdfcce8ecca0aeeb72faae9aa
Reviewed-on: https://go-review.googlesource.com/25600
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
We compute a lot of stuff based off the CFG: postorder traversal,
dominators, dominator tree, loop nest. Multiple phases use this
information and we end up recomputing some of it. Add a cache
for this information so if the CFG hasn't changed, we can reuse
the previous computation.
Change-Id: I9b5b58af06830bd120afbee9cfab395a0a2f74b2
Reviewed-on: https://go-review.googlesource.com/29356
Reviewed-by: David Chase <drchase@google.com>
No point in calling a function when we can build the interface
using a known type (or itab) and the address of a local.
Get rid of third arg (preallocated stack space) to convT2{I,E}.
Makes go binary smaller by 0.2%
benchmark old ns/op new ns/op delta
BenchmarkEfaceInteger-8 16.7 10.1 -39.52%
Update #17118
Update #15375
Change-Id: I9724a1f802bfa1e3957bf1856b55558278e198a2
Reviewed-on: https://go-review.googlesource.com/29373
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Keep Plists in a slice instead of a linked list.
Eliminate unnecessary fields.
Also, while here remove gc's unused breakpc and continpc vars.
Change-Id: Ia04264036c0442843869965d247ccf68a5295115
Reviewed-on: https://go-review.googlesource.com/29367
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
The compiler incorrectly will error when comparing a nil pointer
interface to a nil pointer of any other type. Example:
(*int)(nil) == interface{}(nil)
Will error with "gc: illegal constant expression: *int == interface {}"
Fixes#16702
Change-Id: I1a15d651df2cfca6762b1783a28b377b2e6ff8c6
Reviewed-on: https://go-review.googlesource.com/27591
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Replace the AGLOBL pseudo-op with a method to directly register an
LSym as a global. Similar to how we previously already replaced the
ADATA pseudo-op with directly writing out data bytes.
Passes toolstash -cmp.
Change-Id: I3631af0a2ab5798152d0c26b833dc309dbec5772
Reviewed-on: https://go-review.googlesource.com/29366
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of ranging over servers in the config, grab an offset
from the config that is used to determine indices.
When the rotate option is enabled, the offset increases which
rotates queries through servers. Otherwise, it is always 0
which uses servers in config order.
Fixes#17126
Change-Id: If233f6de7bfa42f88570055b9ab631be08a76b3e
Reviewed-on: https://go-review.googlesource.com/29233
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Mysterious error and no time or easy machine access to investigate
now, so disabling the -buildmode=plugin test on arm64. (The arm
version is working as expected.)
Updates #17138
Change-Id: I4cc56ddf47e7597213462e48d4934a765168bd07
Reviewed-on: https://go-review.googlesource.com/29363
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This test was always being run with external linking on these
platforms because the linker was silently forcing external linking
until CL 28971. Now it produces an error instead.
Change-Id: I794e0812711e05b150daf805dc3451507bb4cae8
Reviewed-on: https://go-review.googlesource.com/29360
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Permits parsing of alias declarations with -newparser
const/type/var/func T => p.T
but the compiler will reject it with an error. For now this
also accepts
type T = p.T
so we can experiment with a type-alias only scenario.
- renamed _Arrow token to _Larrow (<-)
- introduced _Rarrow token (=>)
- introduced AliasDecl node
- extended scanner to accept _Rarrow
- extended parser and printer to handle alias declarations
Change-Id: I0170d10a87df8255db9186d466b6fd405228c38e
Reviewed-on: https://go-review.googlesource.com/29355
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
ppc64 has an extraneous variable live in some situations.
We need a better tighten pass to get rid of this extra variable.
I'm working on it, but fix the test in the meantime.
Fixes build for ppc64.
Change-Id: I1efb9ccb234a64f2a1c228abd2b3195f67fbeb41
Reviewed-on: https://go-review.googlesource.com/29353
Reviewed-by: David Chase <drchase@google.com>
Teach SSA about the cmd/internal/obj/$ARCH register numbering.
It can then return that numbering when requested. Each architecture
now does not need to know anything about the internal SSA numbering
of registers.
Change-Id: I34472a2736227c15482e60994eebcdd2723fa52d
Reviewed-on: https://go-review.googlesource.com/29249
Reviewed-by: David Chase <drchase@google.com>
This CL gives Linkmode a type, switches it to the standard flag
handling mechanism, and deduplicates some logic.
There is a semantic change in this CL. Previously if a link was
invoked explicitly with -linkmode=internal, any condition that forced
external linking would silently override this and use external
linking. Instead it now fails with a reason why. I believe this is an
improvement, but will change it back if there's disagreement.
Fixes#12848
Change-Id: Ic80e341fff65ecfdd2b6fdd6079674cc7210fc5f
Reviewed-on: https://go-review.googlesource.com/28971
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Bias {Eq,Neq}{8,16} to prefer the extension likely to match
their operand's load (if loaded), and elide sign and zero
extending MOV{B,W}, MOV{B,W}Z when their operands are already
appropriately extended.
Change-Id: Ic01b9cab55e170f68fc2369688b50ce78a818608
Reviewed-on: https://go-review.googlesource.com/29236
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
A tentative fix of #16380. It adds "line" everywhere...
This also reduces binary size slightly (cmd/go on ARM as an example):
before after
total binary size 8068097 8018945 (-0.6%)
.gopclntab 1195341 1179929 (-1.3%)
.debug_line 689692 652017 (-5.5%)
Change-Id: Ibda657c6999783c5bac180cbbba487006dbf0ed7
Reviewed-on: https://go-review.googlesource.com/25082
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For -buildmode=plugin, this lets the linker drop the main.main symbol
out of the binary while including most of the runtime.
(In the future it should be possible to drop the entire runtime
package from plugins.)
Change-Id: I3e7a024ddf5cc945e3d8b84bf37a0b7cb2a00eb6
Reviewed-on: https://go-review.googlesource.com/27821
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL contains several linker changes to support creating plugins.
It collects the exported plugin symbols provided by the compiler and
includes them in the moduledata.
It treats a binary as being dynamically linked if it imports the plugin
package. This lets the dynamic linker de-duplicate symbols.
Change-Id: I099b6f38dda26306eba5c41dbe7862f5a5918d95
Reviewed-on: https://go-review.googlesource.com/27820
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Follow up to CL 29134. Generated with gofmt -r 'Nod -> nod', plus
three manual adjustments to the comments in syntax/parser.go
Change-Id: I02920f7ab10c70b6e850457b42d5fe35f1f3821a
Reviewed-on: https://go-review.googlesource.com/29136
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Only added lines are moving amd64 and x86's ginsnop functions from
gsubr.go to ggen.go to match other architectures, so all of the
gsubr.go files can go away.
Change-Id: Ib2292460c155ae6d9dcf5c9801f178031d8eea7a
Reviewed-on: https://go-review.googlesource.com/29240
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Effective Go has references to a function call f(c, req) made by ServeHTTP mixed with f(w,
req). c is dropped in favor of w to maintain consistency
Fixes#17128
Change-Id: I6746fd115ed5a58971fd24e54024d29d18ead1fa
Reviewed-on: https://go-review.googlesource.com/29311
Reviewed-by: Rob Pike <r@golang.org>
ReadMsgUnix and WriteMsgUnix both will read/write 1 byte from/to the
socket if they were given no buffer to read/write, to avoid a common
pitfall in out of band operations (they will usually block
indefinitely if there's no actual data to read).
This patch adds a note about this behaviour in their documentation, so
users can be aware of it.
Change-Id: I751f0e12bb4d80311e94ea8de023595c5d40ec3e
Reviewed-on: https://go-review.googlesource.com/29180
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Binary search remains our friend.
Suppose you add an ought-to-be-benign pattern to PPC64.rules,
and make.bash starts crashing. You can guard the pattern(s)
with config.DebugTest:
(Eq8 x y) && config.DebugTest && isSigned(x.Type) &&
isSigned(y.Type) ->
(Equal (CMPW (SignExt8to32 x) (SignExt8to32 y)))
and then
gossahash -s ./make.bash
...
(go drink beer while silicon minions toil)
...
Trying ./make.bash args=[], env=[GOSSAHASH=100110010111110]
./make.bash failed (1 distinct triggers): exit status 1
Trigger string is 'GOSSAHASH triggered (*importReader).readByte',
repeated 1 times
Review GSHS_LAST_FAIL.0.log for failing run
Finished with GOSSAHASH=100110010111110
Change-Id: I4eff46ebaf496baa2acedd32e217005cb3ac1c62
Reviewed-on: https://go-review.googlesource.com/29273
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Also remove the hard-coded path for getting glibc information.
As an example, the following is the diff for `go bug` on Ubuntu before
and after the change:
>>>
--- /tmp/01 2016-09-13 15:08:53.202758043 +0530
+++ /tmp/02 2016-09-13 21:38:17.485039867 +0530
@@ -1,7 +1,7 @@
Please check whether the issue also reproduces on the latest release, go1.7.1.
```
-go version devel +bdb3b79 Wed Sep 7 03:23:44 2016 +0000 linux/amd64
+go version devel +cb13150 Wed Sep 7 09:46:58 2016 +0530 linux/amd64
GOARCH="amd64"
GOBIN=""
GOEXE=""
@@ -18,5 +18,23 @@
CXX="g++"
CGO_ENABLED="1"
uname -sr: Linux 4.4.0-36-generic
+Distributor ID: Ubuntu
+Description: Ubuntu 16.04.1 LTS
+Release: 16.04
+Codename: xenial
+/lib/x86_64-linux-gnu/libc.so.6: GNU C Library (Ubuntu GLIBC 2.23-0ubuntu3) stable release version 2.23, by Roland McGrath et al.
gdb --version: GNU gdb (Ubuntu 7.11.1-0ubuntu1~16.04) 7.11.1
```
<<<
Change-Id: I7e3730a797af0f94d6e43fe4743ab48bc0f11f1b
Reviewed-on: https://go-review.googlesource.com/28581
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
GOSSAFUNC=foo had previously only done printing for the
single function foo, and didn't quite clean up after itself
properly. Changes ensures that Config.HTML != nil iff
GOSSAFUNC==name-of-current-function.
Change-Id: I255e2902dfc64f715d93225f0d29d9525c06f764
Reviewed-on: https://go-review.googlesource.com/29250
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The only remaining consumers of gins were
ginsnop and arch-independent opcodes like GVARDEF.
Rewrite ginsnop to create and populate progs directly.
Move arch-independent opcodes to package gc
and simplify.
Delete some now unused code.
There is more.
Step one towards eliminating gc.Node.Reg.
Change-Id: I7c34cd8a848f6fc3b030705ab8e293838e0b6c20
Reviewed-on: https://go-review.googlesource.com/29220
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Unroll s == "ab" to
len(s) == 2 && s[0] == 'a' && s[1] == 'b'
This generates faster and shorter code
by avoiding a runtime call.
Do something similar for !=.
The cutoff length is 6. This was chosen empirically
by examining binary sizes on arm, arm64, 386, and amd64
using the SSA backend.
For all architectures examined, 4, 5, and 6 were
the ideal cutoff, with identical binary sizes.
The distribution of constant string equality sizes
during 'go build -a std' is:
40.81% 622 len 0
14.11% 215 len 4
9.45% 144 len 1
7.81% 119 len 3
7.48% 114 len 5
5.12% 78 len 7
4.13% 63 len 2
3.54% 54 len 8
2.69% 41 len 6
1.18% 18 len 10
0.85% 13 len 9
0.66% 10 len 14
0.59% 9 len 17
0.46% 7 len 11
0.26% 4 len 12
0.20% 3 len 19
0.13% 2 len 13
0.13% 2 len 15
0.13% 2 len 16
0.07% 1 len 20
0.07% 1 len 23
0.07% 1 len 33
0.07% 1 len 36
A cutoff of length 6 covers most of the cases.
Benchmarks on amd64 comparing a string to a constant of length 3:
Cmp/1same-8 4.78ns ± 6% 0.94ns ± 9% -80.26% (p=0.000 n=20+20)
Cmp/1diffbytes-8 6.43ns ± 6% 0.96ns ±11% -85.13% (p=0.000 n=20+20)
Cmp/3same-8 4.71ns ± 5% 1.28ns ± 5% -72.90% (p=0.000 n=20+20)
Cmp/3difffirstbyte-8 6.33ns ± 7% 1.27ns ± 7% -79.90% (p=0.000 n=20+20)
Cmp/3difflastbyte-8 6.34ns ± 8% 1.26ns ± 9% -80.13% (p=0.000 n=20+20)
The change to the prove test preserves the
existing intent of the test. When the string was
short, there was a new "proved in bounds" report
that referred to individual byte comparisons.
Change-Id: I593ac303b0d11f275672090c5c786ea0c6b8da13
Reviewed-on: https://go-review.googlesource.com/26758
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
staticassign unwraps all CONVNOPs.
However, in the included test, we need the
CONVNOP for everything to typecheck.
Stop unwrapping unnecessarily.
The code we generate for this example is
suboptimal, but that's not new; see #17113.
Fixes#17111.
Change-Id: I29532787a074a6fe19a5cc53271eb9c84bf1b576
Reviewed-on: https://go-review.googlesource.com/29213
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
After the removal of the old backend many types are no longer referenced
outside internal/gc. Make these functions private so that tools like
honnef.co/go/unused can spot when they become dead code. In doing so
this CL identified several previously public helpers which are no longer
used, so removes them.
This should be the last of the public functions.
Change-Id: I7e9c4e72f86f391b428b9dddb6f0d516529706c3
Reviewed-on: https://go-review.googlesource.com/29134
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
After the removal of the old backend many types are no longer referenced
outside internal/gc. Make these functions private so that tools like
honnef.co/go/unused can spot when they become dead code. In doing so
this CL identified several previously public helpers which are no longer
used, so removes them.
Change-Id: Idc2d485f493206de9d661bd3cb0ecb4684177b32
Reviewed-on: https://go-review.googlesource.com/29133
Run-TryBot: Dave Cheney <dave@cheney.net>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Get rid of BlockCheck. Josh goaded me into it, and I went
down a rabbithole making it happen.
NilCheck now panics if the pointer is nil and returns void, as before.
BlockCheck is gone, and NilCheck is no longer a Control value for
any block. It just exists (and deadcode knows not to throw it away).
I rewrote the nilcheckelim pass to handle this case. In particular,
there can now be multiple NilCheck ops per block.
I moved all of the arch-dependent nil check elimination done as
part of ssaGenValue into its own proper pass, so we don't have to
duplicate that code for every architecture.
Making the arch-dependent nil check its own pass means I needed
to add a bunch of flags to the opcode table so I could write
the code without arch-dependent ops everywhere.
Change-Id: I419f891ac9b0de313033ff09115c374163416a9f
Reviewed-on: https://go-review.googlesource.com/29120
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
We will soon add dedicated builders for running vet/all.
Their name will end with "-vetall".
On those builders, run vet/all and nothing else.
On all other builders, including local all.bash,
don't run vet/all at all, because it is slow.
This will probably be refined more over time.
Change-Id: Ib1d0337adda84353931a325515c132068d4320cd
Reviewed-on: https://go-review.googlesource.com/28962
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
when not instrumenting:
- Intrinsify uses of slicebytetostringtmp within the runtime package
in the ssa backend.
- Pass OARRAYBYTESTRTMP nodes to the compiler backends for lowering
instead of generating calls to slicebytetostringtmp.
name old time/op new time/op delta
ConcatStringAndBytes-4 27.9ns ± 2% 24.7ns ± 2% -11.52% (p=0.000 n=43+43)
Fixes#17044
Change-Id: I51ce9c3b93284ce526edd0234f094e98580faf2d
Reviewed-on: https://go-review.googlesource.com/29017
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
It is unlikely that the value of UnixNano overflow in most
use cases. However, the max date of 2262 is also within the range
where it may be of concern to some users. Rather than have each
person recompute when this overflows to validate if its okay for
their use case, we just document it as within the years 1678 and
2262, for user's convenience.
Fixes#16977
Change-Id: I4988738c147f4a6d30f8b8735c3941b75113bb16
Reviewed-on: https://go-review.googlesource.com/28478
Reviewed-by: Andrew Gerrand <adg@golang.org>
No need to test so many sizes in race mode, especially for a package
which doesn't use goroutines.
Reduces test time from 2.5 minutes to 25 seconds.
Updates #17104
Change-Id: I7065b39273f82edece385c0d67b3f2d83d4934b8
Reviewed-on: https://go-review.googlesource.com/29163
Reviewed-by: David Crawshaw <crawshaw@golang.org>
No coverage is gained by running the 1e6 versions of the test over the
1e4 versions. It just adds 140 seconds of race overhead time.
Updates #17104
Change-Id: I41408aedae34a8b1a148eebdda20269cdefffba3
Reviewed-on: https://go-review.googlesource.com/29159
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
cmd/cover, cmd/trace, and cmd/pprof all open browsers.
'go bug' will soon also open a browser.
It is time to unify the browser-handling code.
Change-Id: Iee6b443e21e938aeaaac366a1aefb1afbc7d9b2c
Reviewed-on: https://go-review.googlesource.com/29160
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Don't benchmark so many sizes during the race builder's benchmark run.
This package doesn't even use goroutines.
Cuts off 10 seconds.
Updates #17104
Change-Id: Ibb2c7272c18b9014a775949c656a5b930f197cd4
Reviewed-on: https://go-review.googlesource.com/29158
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Shave 6.5 minutes off the *-race build time.
The *-race builders run:
go test -short -race -run=^$ -benchtime=.1s -cpu=4 $PKG
... for each package with benchmarks.
The point isn't to measure the speed of the packages, but rather to
see if there are any races. (which is why a benchtime of 0.1 seconds
is used)
But running in race mode makes things slower and our benchmarks aren't
all very fast to begin with.
The regexp benchmarks in race were taking over 6.5 minutes. With this
CL, it's now 8 seconds.
Updates #17104
Change-Id: I054528d09b1568d37aac9f9b515d6ed90a5cf5b0
Reviewed-on: https://go-review.googlesource.com/29156
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Rip out the code that allows SSA to be used conditionally.
No longer exists:
ssa=0 flag
GOSSAHASH
GOSSAPKG
SSATEST
GOSSAFUNC now only controls the printing of the IR/html.
Still need to rip out all of the old backend. It should no longer be
callable after this CL.
Update #16357
Change-Id: Ib30cc18fba6ca52232c41689ba610b0a94aa74f5
Reviewed-on: https://go-review.googlesource.com/29155
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The go_test_bench:* tests run:
go test -short -race -run=^$ -benchtime=.1s -cpu=4 $PKG
... on each discovered package with any tests. (The same set used for
the "go_test:*" tests)
That set was 168 packages:
$ go tool dist test -list | grep go_test: | wc -l
168
But only 76 of those have a "func Benchmark", and running each
"go_test_bench:" test and compiling it in race mode, just to do
nothing took 1-2 seconds each.
So stop doing that and filter out the useless packages earlier. Now:
$ go tool dist test -list -race | grep go_test_bench: | wc -l
76
Should save 90-180 seconds. (or maybe 45 seconds for trybots, since
they're sharded)
Updates #17104
Change-Id: I08ccb072a0dc0454ea425540ee8e74b59f83b773
Reviewed-on: https://go-review.googlesource.com/29153
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The change corrects the values of the largest float32 value (f1) and the
value of the halfway point between f1 and the next, overflow value (f2).
Fixes#17012
Change-Id: Idaf9997b69d61fafbffdb980d751c9857732e14d
Reviewed-on: https://go-review.googlesource.com/29171
Reviewed-by: Robert Griesemer <gri@golang.org>
While you could argue the previous wording technically said that -1 is
an acceptable way to indicate "unknown" on the client, it could be read
as ambiguous. Now it's clear that both 0 and -1 mean unknown.
Change-Id: I3bc5a3fd5afd1999e487296ec121eb548415e6b0
Reviewed-on: https://go-review.googlesource.com/29130
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Exported is no longer used since removing the text-format exporter,
and Safe is only used within importfile so it can be made into a local
variable.
Change-Id: I92986f704d7952759c79d9243620a22c24602333
Reviewed-on: https://go-review.googlesource.com/29115
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Current code uses trees of bytes.Buffer as data representation.
Each bytes.Buffer takes 4k bytes at least, so it's waste of memory.
The change introduces trees of lazy-encoder as
alternative one which reduce allocations.
name old time/op new time/op delta
Marshal-4 64.7µs ± 2% 42.0µs ± 1% -35.07% (p=0.000 n=9+10)
name old alloc/op new alloc/op delta
Marshal-4 35.1kB ± 0% 7.6kB ± 0% -78.27% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
Marshal-4 503 ± 0% 293 ± 0% -41.75% (p=0.000 n=10+10)
Change-Id: I32b96c20b8df00414b282d69743d71a598a11336
Reviewed-on: https://go-review.googlesource.com/27030
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If there are too few primes of the given length then it can be
impossible to generate an RSA key with n distinct primes.
This change approximates the expected number of candidate primes and
causes key generation to return an error if it's unlikely to succeed.
Fixes#16596.
Change-Id: I53b60d0cb90e2d0e6f0662befa64d13f24af51a7
Reviewed-on: https://go-review.googlesource.com/28969
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 28978 (6ec993a) accidentally disabled the test (it would only
run if amd64 AND s390x, whereas it should be amd64 OR s390x).
Change-Id: I23c1ad71724ff55f5808d5896b19b62c8ec5af76
Reviewed-on: https://go-review.googlesource.com/28981
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL makes code like this work:
res, err := http.Get("https://фу.бар/баз")
So far, IDNA support is limited to the http1 and http2 Transports.
The http package is currently responsible for converting domain names
into Punycode before calling the net layer. The http package also has
to Punycode-ify the hostname for the Host & :authority headers for
HTTP/1 and HTTP/2, respectively.
No automatic translation from Punycode back to Unicode is performed,
per Go's historical behavior. Docs are updated where relevant. No
changes needed to the Server package. Things are already in ASCII
at that point.
No changes to the net package, at least yet.
Updates x/net/http2 to git rev 57c7820 for https://golang.org/cl/29071
Updates #13835
Change-Id: I1e9a74c60d00a197ea951a9505da5c3c3187099b
Reviewed-on: https://go-review.googlesource.com/29072
Reviewed-by: Chris Broadfoot <cbro@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Consider repeatedly adding many items to a map
and then deleting them all, as in #16070. The map
itself doesn't need to grow above the high water
mark of number of items. However, due to random
collisions, the map can accumulate overflow
buckets.
Prior to this CL, those overflow buckets were
never removed, which led to a slow memory leak.
The problem with removing overflow buckets is
iterators. The obvious approach is to repack
keys and values and eliminate unused overflow
buckets. However, keys, values, and overflow
buckets cannot be manipulated without disrupting
iterators.
This CL takes a different approach, which is to
reuse the existing map growth mechanism,
which is well established, well tested, and
safe in the presence of iterators.
When a map has accumulated enough overflow buckets
we trigger map growth, but grow into a map of the
same size as before. The old overflow buckets will
be left behind for garbage collection.
For the code in #16070, instead of climbing
(very slowly) forever, memory usage now cycles
between 264mb and 483mb every 15 minutes or so.
To avoid increasing the size of maps,
the overflow bucket counter is only 16 bits.
For large maps, the counter is incremented
stochastically.
Fixes#16070
Change-Id: If551d77613ec6836907efca58bda3deee304297e
Reviewed-on: https://go-review.googlesource.com/25049
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The existing implementation calls l.next for each run up to the next
instance of the left delimiter ({{). For ascii text, this is multiple
function calls per byte. Change to use strings.Index to find the left
delimiter. The performace improvement ranges from 1:1 (no text outside
of {{}}'s) to multiple times faster (9:1 was seen on 8K of text with no
{{ }}'s).
Change-Id: I2f82bea63b78b6714f09a725f7b2bbb00a3448a3
Reviewed-on: https://go-review.googlesource.com/24863
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
Linker and reflect info generation (reflect.go) relies on formatting
of types (tconv). The fmt.Format based approach introduces extra
allocations, which matter in those cases. Resurrected sconv and tconv
code from commit c85b77c (fmt.go only); and adjusted it slightly.
The formatter-based approach is still used throughout the rest of the
compiler, but reflect.go now uses the tconv method that simply returns
the desired string.
(The timing data below may not be accurate; I've included it only for
comparison with the numbers in issue #16897).
name old time/op new time/op delta
Template 297ms ± 2% 288ms ± 3% -3.12% (p=0.000 n=27+29)
Unicode 155ms ± 5% 150ms ± 5% -3.26% (p=0.000 n=30+30)
GoTypes 1.00s ± 3% 0.95s ± 3% -4.51% (p=0.000 n=28+29)
name old alloc/op new alloc/op delta
Template 46.8MB ± 0% 46.5MB ± 0% -0.65% (p=0.000 n=28+30)
Unicode 37.9MB ± 0% 37.8MB ± 0% -0.24% (p=0.000 n=29+30)
GoTypes 144MB ± 0% 143MB ± 0% -0.68% (p=0.000 n=30+30)
name old allocs/op new allocs/op delta
Template 469k ± 0% 446k ± 0% -5.01% (p=0.000 n=29+30)
Unicode 375k ± 0% 369k ± 0% -1.62% (p=0.000 n=30+28)
GoTypes 1.47M ± 0% 1.37M ± 0% -6.29% (p=0.000 n=30+30)
The code for sconv/tconv in fmt.go now closely match the code from c85b77c
again; except that the functions are now methods. Removing the use of
the bytes.Buffer in tconv and special-caseing interface{} has helped a
small amount as well:
name old time/op new time/op delta
Template 299ms ± 3% 288ms ± 3% -3.83% (p=0.000 n=29+29)
Unicode 156ms ± 5% 150ms ± 5% -3.56% (p=0.000 n=30+30)
GoTypes 960ms ± 2% 954ms ± 3% -0.58% (p=0.037 n=26+29)
name old alloc/op new alloc/op delta
Template 46.6MB ± 0% 46.5MB ± 0% -0.22% (p=0.000 n=30+30)
Unicode 37.8MB ± 0% 37.8MB ± 0% ~ (p=0.075 n=30+30)
GoTypes 143MB ± 0% 143MB ± 0% -0.31% (p=0.000 n=30+30)
name old allocs/op new allocs/op delta
Template 447k ± 0% 446k ± 0% -0.28% (p=0.000 n=30+30)
Unicode 369k ± 0% 369k ± 0% -0.03% (p=0.032 n=30+28)
GoTypes 1.38M ± 0% 1.37M ± 0% -0.35% (p=0.000 n=29+30)
Comparison between c85b77c and now (see issue #16897):
name old time/op new time/op delta
Template 307ms ± 4% 288ms ± 3% -6.24% (p=0.000 n=29+29)
Unicode 164ms ± 4% 150ms ± 5% -8.20% (p=0.000 n=30+30)
GoTypes 1.01s ± 3% 0.95s ± 3% -5.72% (p=0.000 n=30+29)
name old alloc/op new alloc/op delta
Template 46.8MB ± 0% 46.5MB ± 0% -0.66% (p=0.000 n=29+30)
Unicode 37.8MB ± 0% 37.8MB ± 0% -0.13% (p=0.000 n=30+30)
GoTypes 143MB ± 0% 143MB ± 0% -0.11% (p=0.000 n=30+30)
name old allocs/op new allocs/op delta
Template 444k ± 0% 446k ± 0% +0.48% (p=0.000 n=30+30)
Unicode 369k ± 0% 369k ± 0% +0.09% (p=0.000 n=30+28)
GoTypes 1.35M ± 0% 1.37M ± 0% +1.47% (p=0.000 n=30+30)
There's still a small increase (< 1.5%) for GoTypes but pending a complete
rewrite of fmt.go, this seems ok again.
Fixes#16897.
Change-Id: I7e0e56cd1b9f981252eded917f5752259d402354
Reviewed-on: https://go-review.googlesource.com/29087
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
No need for it, we can treat calls as (mostly) normal values
that take a memory and return a memory.
Lowers the number of basic blocks needed to represent a function.
"go test -c net/http" uses 27% fewer basic blocks.
Probably doesn't affect generated code much, but should help
various passes whose running time and/or space depends on
the number of basic blocks.
Fixes#15631
Change-Id: I0bf21e123f835e2cfa382753955a4f8bce03dfa6
Reviewed-on: https://go-review.googlesource.com/28950
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Don't break on line number, instead break on the actual call.
This makes the test more robust to line numbering changes in the backend.
A CL (28950) changed the generated code line numbering slightly. A MOVW
$0, R0 instruction at the start of the function changed to line
10 (because several constant zero instructions got CSEd, and one gets
picked arbitrarily). That's too fragile for a test.
Change-Id: I5d6a8ef0603de7d727585004142780a527e70496
Reviewed-on: https://go-review.googlesource.com/29085
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If an op generates a tuple, and part of that tuple is of flags type,
then treat the op as clobbering flags.
Normally this doesn't matter because we do:
v1 = ADDS <int32, flags>
v2 = Select0 v1 <int32>
v3 = Select1 v1 <flags>
And v3 will do the right clobbering of flags. But in the rare
cases where we issue a tuple-with-flag op and the flag portion
is dead, then we never issue a Select1. But v1 still clobbers flags,
so we need to respect that.
Fixes builder failure in CL 28950.
Change-Id: I589089fd81aaeaaa9750bb8d85e7b10199aaa002
Reviewed-on: https://go-review.googlesource.com/29083
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Truncate and Round operate on absolute time, which means that
Truncate(Hour) may return a time with non-zero Minute(). Document that
more clearly, and remove the misleading example which suggests it is
safe.
Updates #16647
Change-Id: I930584ca030dd12849195d45e49ed2fb74e0c9ac
Reviewed-on: https://go-review.googlesource.com/28730
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This used to be used to give special semantics to the builtin
definitions of package runtime and unsafe, but none of those are
relevant anymore:
- The builtin runtime and unsafe packages do not risk triggering false
import cycles since they no longer contain `import "runtime"`.
- bimport.go never creates ODCLTYPE, so no need to special case them.
- "incannedimport != 0" is only true when "importpkg != nil" anyway,
so "incannedimport == 0 && importpkg == nil" is equivalent to just
"importpkg == nil".
Change-Id: I076f15dd705d4962e7a4c33972e304ef67e7effb
Reviewed-on: https://go-review.googlesource.com/29084
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We already explicitly construct the "unsafe.Pointer" type in typeinit
because we need it for Types[TUNSAFEPTR]. No point in also having it
in builtin/unsafe.go if it just means (*importer).importtype needs to
fix it.
Change-Id: Ife8a5a73cbbe2bfcabe8b25ee4f7e0f5fd0570b4
Reviewed-on: https://go-review.googlesource.com/29082
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
- also consistently use %v instead of %s when we have a (gc) Formatter
- rewrite done automatically using Formats test in -u (update) mode
- manual update of format strings that were not single string constants
- updated fmt.go, fmt_test.go accordingly
- fmt_test: permit "%T" always
Change-Id: I8f0704286aba5704600ad0c4a4484005b79b905d
Reviewed-on: https://go-review.googlesource.com/28954
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- only accept a-z, A-Z as format verbs
- blacklist vendored math package (no need to include it)
Change-Id: Ica0fcbfe712369f79dd1d3472dfd4759b8bc3752
Reviewed-on: https://go-review.googlesource.com/28953
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The download page says "OS X 10.8 or later", but other pages said 10.7.
Say 10.8 everywhere.
Turns out Go doesn't even compile on OS X 10.7 (details in bug) and we
only run builders for OS X 10.8+, which is likely why 10.7
regressed. Until recently we only had OS X 10.10 builders, even.
We could run 10.7 builders, but there's basically no reason to do so,
especially with 10.12 coming out imminently.
Fixes#16625
Change-Id: Ida6e20fb6c54aea0a3757235b708ac1c053b8c04
Reviewed-on: https://go-review.googlesource.com/28870
Reviewed-by: Chris Broadfoot <cbro@golang.org>
The new SSA backend for s390x can use R0 as a general purpose register.
This change modifies assembly code to either avoid using R0 entirely
or explicitly set R0 to 0.
R0 can still be safely used as 0 in address calculations.
Change-Id: I3efa723e9ef322a91a408bd8c31768d7858526c8
Reviewed-on: https://go-review.googlesource.com/28976
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This commit adds the following instructions to support the new SSA
backend for s390x:
32-bit operations:
ADDW
SUBW
NEGW
FNEGS
Conditional moves:
MOVDEQ
MOVDGE
MOVDGT
MOVDLE
MOVDLT
MOVDNE
Unordered branches (for floating point comparisons):
BLEU
BLTU
Modulo operations:
MODW
MODWU
MODD
MODDU
The modulo operations might be removed in a future commit because
I'd like to change DIV to produce a tuple once the old backend is
removed.
This commit also removes uses of REGZERO from the assembler. They
aren't necessary and R0 will be used as a GPR by SSA.
Change-Id: I05756c1cbb74bf4a35fc492f8f0cd34b50763dc9
Reviewed-on: https://go-review.googlesource.com/29075
Run-TryBot: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When possible, emit static data rather than
init functions for interface values.
This:
* cuts 32k off cmd/go
* removes several error values from runtime init
* cuts the size of the image/color/palette compiled package from 103k to 34k
* reduces the time to build the package in #15520 from 8s to 1.5s
Fixes#6289Fixes#15528
Change-Id: I317112da17aadb180c958ea328ab380f83e640b4
Reviewed-on: https://go-review.googlesource.com/26668
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The CL 28951 added TestLookupPort_Minimal, which was failing
on Plan 9, because lookupPort was not case-insensitive.
Change-Id: Ic80dd29dad4ffd1c84c2590e3d5d0e588ab2e6c2
Reviewed-on: https://go-review.googlesource.com/29051
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It's not intuitive, especially in the presence of subtests, so improve the
explanation and extend and explain the examples.
Change-Id: I6c4d3f8944b60b12311d0c0f0a8e952e7c35a9ed
Reviewed-on: https://go-review.googlesource.com/28995
Reviewed-by: Andrew Gerrand <adg@golang.org>
Remove the naked returns and goto statements from parse.
Make tests more consistent in the got/want ordering, and clean up some
unnecessary helper functions.
Change-Id: Iaa244cb8c00dd6b42836d95448bf02caa72bfabd
Reviewed-on: https://go-review.googlesource.com/28890
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Since 2a8c81ff handshake messages are not written directly to wire but
buffered. If an error happens at the wrong time the alert will be
written to the buffer but never flushed, causing an EOF on the client
instead of a more descriptive alert.
Thanks to Brendan McMillion for reporting this.
Fixes#17037
Change-Id: Ie093648aa3f754f4bc61c2e98c79962005dd6aa2
Reviewed-on: https://go-review.googlesource.com/28818
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When cmd/compile generates position-independent code on linux
(the -shared flag), it refers to runtime.tlsg as a TLS IE variable.
When cmd/link is linking a PIE executable internally, all TLS IE
relocations are generated by cmd/compile, and the variable they
refer to, runtime.tlsg, is local to the binary. This means we can
optimize this particular IE case to LE, and thus implement IE
support when internally linking.
To do this optimization in the linker, we need to rewrite the
PC-relative MOVD to a constant load. This may seem like an
unconscionable act born of enthusiasm, but it turns out this is
standard operating procedure for linkers. GNU gold does exactly
the same optimization. I spent some time reading it and documented
at least one missing feature from this version.
Part of adding PIE internal linking on linux/amd64.
Change-Id: I1eb068d0ec774724944c6b308aa5084582ecde0b
Reviewed-on: https://go-review.googlesource.com/28540
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reuses the machinery built for dynamic loading of shared
libraries. The significant difference with PIE is we generate
dynamic relocations for known internal symbols, not just
dynamic external symbols.
Part of adding PIE internal linking on linux/amd64.
Change-Id: I4afa24070bfb61f94f8d3648f2433d5343bac3fe
Reviewed-on: https://go-review.googlesource.com/28539
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When internally linking with using rel.ro sections, this segment covers
the sections. To do this, move to other read-only sections, SELFROSECT
and SMACHOPLT, out of the way.
Part of adding PIE internal linking on linux/amd64.
Change-Id: I4fb3d180e92f7e801789ab89864010faf5a2cb6d
Reviewed-on: https://go-review.googlesource.com/28538
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Adds golang.org/x/net/idna to the Go repo from the
golang.org/x/net repo's git rev 7db922ba (Dec 2012).
Punycode is needed for http.Get("привет.рф") etc., which will
come in separate commits.
Updates #13835
Change-Id: I313ed82d292737579a3ec5dcf8a9e766f2f75138
Reviewed-on: https://go-review.googlesource.com/28961
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also, flesh out the baked-in /etc/services table for LookupPort a bit.
This services map moves from a unix-specific file to a portable file
where nacl can use it.
Also, remove the duplicated entries in the protocol map in different
cases, and just canonicalize the input before looking in the map. Now
it handles any case, including MiXeD cAse.
In the process, add a test that service names for LookupPort are case
insensitive. They were on Windows, but not cgo. Now there's a test and
they're case insensitive in all 3+ paths. Maybe it breaks plan9. We'll
see.
Fixes#17045
Change-Id: Idce7d68703f371727c7505cda03a32bd842298cd
Reviewed-on: https://go-review.googlesource.com/28951
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
CL 28484 mistakenly assumed that WSARecv returns WSAEINPROGRESS
when there is nothing to read. But the error is ERROR_IO_PENDING.
Fix that mistake.
I was about to write a test for it. But I have found
TestTCPReadWriteAllocs in net package that does nearly what I need,
but was conveniently disabled. So enable and extend the test.
Fixes#16988
Change-Id: I55e5cf8998a9cf29e92b398d702280bdf7d6fc85
Reviewed-on: https://go-review.googlesource.com/28990
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This was written for CL 27811,
but it got lost in the sea of new files.
Change-Id: I5c52cb23dda499b21a6bb32ed5c586779ccbc2f1
Reviewed-on: https://go-review.googlesource.com/28960
Reviewed-by: Rob Pike <r@golang.org>
This CL adds a script to run vet on std and cmd.
There are a considerable number of false positives,
mostly from legitimate but unusual assembly in
the runtime and reflect packages.
There are also a few false positives that need fixes.
They are noted as such in the whitelists;
they're not worth holding this CL for.
The unsafe pointer check is disabled.
The false positive rate is just too high to be worth it.
There is no cmd/dist/test integration yet.
The tentative plan is that we'll check the local platform
during all.bash, and that there'll be a fast builder that
checks all platforms (to cover platforms that can't exec).
Fixes#11041
Change-Id: Iee4ed32b05447888368ed86088e3ed3771f84442
Reviewed-on: https://go-review.googlesource.com/27811
Reviewed-by: Rob Pike <r@golang.org>
Concurrent use of tls.Config is allowed, and may lead to
KeyLogWriter being written to concurrently. Without a mutex
to protect it, corrupted output may occur. A mutex is added
for correctness.
The mutex is made global to save size of the config struct as
KeyLogWriter is rarely enabled.
Related to #13057.
Change-Id: I5ee55b6d8b43a191ec21f06e2aaae5002a71daef
Reviewed-on: https://go-review.googlesource.com/29016
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
GoToolPath requires a *testing.T to handle errors.
GoTool provides a variant that returns errors
for clients without a *testing.T,
such as that found in CL 27811.
Change-Id: I7ac8b7ec9d472894c37223c5f7b121ec823e7f61
Reviewed-on: https://go-review.googlesource.com/28787
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The existing implementation of flag values with fmt package uses
more memory and works slower than the implementation with strconv
package.
Change-Id: I9e749179f66d5c50cafe98186641bcdbc546d2db
Reviewed-on: https://go-review.googlesource.com/28914
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This enables the format test to process this file (the format
test doesn't handle indexed formats, and this is the only place
in the compiler where they occur).
Change-Id: I99743f20c463f181a589b210365f70162227d4e0
Reviewed-on: https://go-review.googlesource.com/28932
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Moves the grouping of symbol kinds (sections) into cmd/internal/obj
to keep it near the definition. Groundwork for CL 28538.
Change-Id: I99112981e69b028f366e1333f31cd7defd4ff82c
Reviewed-on: https://go-review.googlesource.com/28691
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
As cmd/internal/obj is coordinating the definition of GOOS, GOARCH,
etc across the compiler and linker, turn its functions into globals
and use them everywhere.
Change-Id: I5db5addda3c6b6435c37fd5581c7c3d9a561f492
Reviewed-on: https://go-review.googlesource.com/28854
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Separate out windows/windowsgui properly so we are not encoding some
of the Headtype value in a separate headstring global.
Remove one of the two copies of the variable from cmd/link.
Remove duplicate string to headtype list.
Change-Id: Ifa20fb9652a1dc95161e154aac11f15ad0f709d0
Reviewed-on: https://go-review.googlesource.com/28853
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Modifies context package to use map[]struct{} rather than map[]bool,
since the map is intended as a set object. Also adds Benchmarks to
the context package switching between different types of root nodes
and a tree with different depths.
Included below are bytes deltas between the old and new code, using
these benchmarks.
benchmark old bytes new bytes delta
BenchmarkContextCancelTree/depth=1/Root=Background-8 176 176 +0.00%
BenchmarkContextCancelTree/depth=1/Root=OpenCanceler-8 560 544 -2.86%
BenchmarkContextCancelTree/depth=1/Root=ClosedCanceler-8 352 352 +0.00%
BenchmarkContextCancelTree/depth=10/Root=Background-8 3632 3488 -3.96%
BenchmarkContextCancelTree/depth=10/Root=OpenCanceler-8 4016 3856 -3.98%
BenchmarkContextCancelTree/depth=10/Root=ClosedCanceler-8 1936 1936 +0.00%
BenchmarkContextCancelTree/depth=100/Root=Background-8 38192 36608 -4.15%
BenchmarkContextCancelTree/depth=100/Root=OpenCanceler-8 38576 36976 -4.15%
BenchmarkContextCancelTree/depth=100/Root=ClosedCanceler-8 17776 17776 +0.00%
BenchmarkContextCancelTree/depth=1000/Root=Background-8 383792 367808 -4.16%
BenchmarkContextCancelTree/depth=1000/Root=OpenCanceler-8 384176 368176 -4.16%
BenchmarkContextCancelTree/depth=1000/Root=ClosedCanceler-8 176176 176176 +0.00%
Change-Id: I699ad704d9f7b461214e1651d24941927315b525
Reviewed-on: https://go-review.googlesource.com/25270
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Currently the footnote says "gcc is required only if you plan to use cgo",
but the footnote was referenced from the text:
"use the clang or gcc† that comes with Xcode‡ for cgo support"
That seems to imply that clang doesn't get you cgo support on OS X,
which isn't true. The update text matches what the install-source.html
page says.
Change-Id: Ib88464a0d138227d357033123f6675a77d5d777f
Reviewed-on: https://go-review.googlesource.com/28786
Reviewed-by: Minux Ma <minux@golang.org>
Benchmarks are much better for opaque fills and slightly worse on non
opaque fills. I think that on balance, this is still a win.
When the source is uniform(color.RGBA{0x11, 0x22, 0x33, 0xff}):
name old time/op new time/op delta
FillOver-8 966µs ± 1% 32µs ± 1% -96.67% (p=0.000 n=10+10)
FillSrc-8 32.4µs ± 1% 32.2µs ± 1% ~ (p=0.053 n=9+10)
When the source is uniform(color.RGBA{0x11, 0x22, 0x33, 0x44}):
name old time/op new time/op delta
FillOver-8 962µs ± 0% 1018µs ± 0% +5.85% (p=0.000 n=9+10)
FillSrc-8 32.2µs ± 1% 32.1µs ± 0% ~ (p=0.148 n=10+10)
Change-Id: I52ec6d5fcd0fbc6710cef0e973a21ee7827c0dd9
Reviewed-on: https://go-review.googlesource.com/28790
Reviewed-by: David Crawshaw <crawshaw@golang.org>
STFLE does not necessarily write to all the double-words that are
requested. It is therefore necessary to clear the target memory
before calling STFLE in order to ensure that the facility list does
not contain false positives.
Fixes#17032.
Change-Id: I7bec9ade7103e747b72f08562fe57e6f091bd89f
Reviewed-on: https://go-review.googlesource.com/28850
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Use MOVW, instead of MOVV, to pass an int32 arg. Also no need to
restore arg registers.
Fix big-endian MIPS64 build.
Change-Id: Ib43c71075c988153e5e5c5c6e7297b3fee28652a
Reviewed-on: https://go-review.googlesource.com/28830
Reviewed-by: Minux Ma <minux@golang.org>
It is better to document what golang does, rather than how it differs
from languages which readers may or may not know.
That the output format is based on the type is basically self-evident
if you consider this just in go terms.
Change-Id: I0223e9b4cb67cc83a9ebe4d424e6c151d7ed600f
Reviewed-on: https://go-review.googlesource.com/28393
Reviewed-by: Rob Pike <r@golang.org>
Currently, path resolution is done using the un-escaped version of
paths. This means that path elements like one%2ftwo%2fthree are
handled incorrectly, and optional encodings (%2d vs. -) are dropped.
This function makes escaped handling consistent with Parse: provided
escapings are honoured, and RawPath is only set if necessary.
A helper method setPath is introduced to handle the correct setting of
Path and RawPath given the encoded path.
Fixes#16947
Change-Id: I40b1215e9066e88ec868b41635066eee220fde37
Reviewed-on: https://go-review.googlesource.com/28343
Run-TryBot: Dave Day <djd@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
So we can submit a sequence of older changes that don't yet
update the formats in this file. We will then re-enable the
test with the updated formats.
Change-Id: I6ed559b83adc891bbf4b3d855a7dc1e428366f7f
Reviewed-on: https://go-review.googlesource.com/28776
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fixes#11254.
Updates #16360.
Implements examples using all exported functions.
This CL also updates Decode documentation to
state that only hexadecimal characters are accepted
in the source slice src, but also that the length
of src must be even.
Change-Id: Id016a4ba814f940cd300f26581fb4b9d2aded306
Reviewed-on: https://go-review.googlesource.com/28482
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Hop-by-hop headers (explicitly mentioned in RFC 2616) were already
removed from the response. This removes the custom hop-by-hop
headers listed in the "Connection" header of the response.
Updates #16875
Change-Id: I6b8f261d38b8d72040722f3ded29755ef0303427
Reviewed-on: https://go-review.googlesource.com/28810
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The previous check for characters inside of a JSON string that needed
to be escaped performed seven different boolean comparisons before
determining that a ASCII character did not need to be escaped. Most
characters do not need to be escaped, so this check can be done in a
more performant way.
Use the same strategy as the unicode package for precomputing a range
of characters that need to be escaped, then do a single lookup into a
character array to determine whether the character needs escaping.
On an AWS c4.large node:
$ benchstat benchmarks/master-bench benchmarks/json-table-bench
name old time/op new time/op delta
CodeEncoder-2 19.0ms ± 0% 15.5ms ± 1% -18.16% (p=0.000 n=19+20)
CodeMarshal-2 20.1ms ± 1% 16.8ms ± 2% -16.35% (p=0.000 n=20+21)
CodeDecoder-2 49.3ms ± 1% 49.5ms ± 2% ~ (p=0.498 n=16+20)
DecoderStream-2 416ns ± 0% 416ns ± 1% ~ (p=0.978 n=19+19)
CodeUnmarshal-2 51.0ms ± 1% 50.9ms ± 1% ~ (p=0.490 n=19+17)
CodeUnmarshalReuse-2 48.5ms ± 2% 48.5ms ± 2% ~ (p=0.989 n=20+19)
UnmarshalString-2 541ns ± 1% 532ns ± 1% -1.75% (p=0.000 n=20+21)
UnmarshalFloat64-2 485ns ± 1% 481ns ± 1% -0.92% (p=0.000 n=20+21)
UnmarshalInt64-2 429ns ± 1% 427ns ± 1% -0.49% (p=0.000 n=19+20)
Issue10335-2 631ns ± 1% 619ns ± 1% -1.84% (p=0.000 n=20+20)
NumberIsValid-2 19.1ns ± 0% 19.1ns ± 0% ~ (all samples are equal)
NumberIsValidRegexp-2 689ns ± 1% 690ns ± 0% ~ (p=0.150 n=20+20)
SkipValue-2 14.0ms ± 0% 14.0ms ± 0% -0.05% (p=0.000 n=18+18)
EncoderEncode-2 525ns ± 2% 512ns ± 1% -2.33% (p=0.000 n=20+18)
name old speed new speed delta
CodeEncoder-2 102MB/s ± 0% 125MB/s ± 1% +22.20% (p=0.000 n=19+20)
CodeMarshal-2 96.6MB/s ± 1% 115.6MB/s ± 2% +19.56% (p=0.000 n=20+21)
CodeDecoder-2 39.3MB/s ± 1% 39.2MB/s ± 2% ~ (p=0.464 n=16+20)
CodeUnmarshal-2 38.1MB/s ± 1% 38.1MB/s ± 1% ~ (p=0.525 n=19+17)
SkipValue-2 143MB/s ± 0% 143MB/s ± 0% +0.05% (p=0.000 n=18+18)
I also took the data set reported in #5683 (browser
telemetry data from Mozilla), added named structs for
the data set, and turned it into a proper benchmark:
https://github.com/kevinburke/jsonbench/blob/master/go/bench_test.go
The results from that test are similarly encouraging. On a 64-bit
Mac:
$ benchstat benchmarks/master-benchmark benchmarks/json-table-benchmark
name old time/op new time/op delta
CodeMarshal-4 1.19ms ± 2% 1.08ms ± 2% -9.33% (p=0.000 n=21+17)
Unmarshal-4 3.09ms ± 3% 3.06ms ± 1% -0.83% (p=0.027 n=22+17)
UnmarshalReuse-4 3.04ms ± 1% 3.04ms ± 1% ~ (p=0.169 n=20+15)
name old speed new speed delta
CodeMarshal-4 80.3MB/s ± 1% 88.5MB/s ± 1% +10.29% (p=0.000 n=21+17)
Unmarshal-4 31.0MB/s ± 2% 31.2MB/s ± 1% +0.83% (p=0.025 n=22+17)
On the c4.large:
$ benchstat benchmarks/master-bench benchmarks/json-table-bench
name old time/op new time/op delta
CodeMarshal-2 1.10ms ± 1% 0.98ms ± 1% -10.12% (p=0.000 n=20+54)
Unmarshal-2 2.82ms ± 1% 2.79ms ± 0% -1.09% (p=0.000 n=20+51)
UnmarshalReuse-2 2.80ms ± 0% 2.77ms ± 0% -1.03% (p=0.000 n=20+52)
name old speed new speed delta
CodeMarshal-2 87.3MB/s ± 1% 97.1MB/s ± 1% +11.27% (p=0.000 n=20+54)
Unmarshal-2 33.9MB/s ± 1% 34.2MB/s ± 0% +1.10% (p=0.000 n=20+51)
For what it's worth, I tried other heuristics - short circuiting the
conditional for common ASCII characters, for example:
if (b >= 63 && b != 92) || (b >= 39 && b <= 59) || (rest of the conditional)
This offered a speedup around 7-9%, not as large as the submitted
change.
Change-Id: Idcf88f7b93bfcd1164cdd6a585160b7e407a0d9b
Reviewed-on: https://go-review.googlesource.com/24466
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When arg length is wrong, op is not set, so it always prints
"should have 0 args".
Change-Id: If7bcb41d993919d0038d2a09e16188c79dfbd858
Reviewed-on: https://go-review.googlesource.com/28831
Reviewed-by: Keith Randall <khr@golang.org>
Before this CL the runtime prevented printing of overlong strings with the print
function when the length of the string was determined to be corrupted.
Corruption was checked by comparing the string size against the limit
which was stored in maxstring.
However maxstring was not updated everywhere were go strings were created
e.g. for string constants during compile time. Thereby the check for maximum
string length prevented the printing of some valid strings.
The protection maxstring provided did not warrant the bookkeeping
and global synchronization needed to keep maxstring updated to the
correct limit everywhere.
Fixes#16999
Change-Id: I62cc2f4362f333f75b77f199ce1a71aac0ff7aeb
Reviewed-on: https://go-review.googlesource.com/28813
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Since FuncTypes are represented as structs rather than linking the
parameter lists together, we no longer need to worry about duplicating
the parameter lists.
Change-Id: I3767aa3cd1cbeddfb80a6eef6b42290dc2ac14ae
Reviewed-on: https://go-review.googlesource.com/28574
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
We were already making a copy of the map before removing
hop-by-hop headers. This commit does the same for proxied
headers mentioned in the "Connection" header.
A test is added to ensure request headers are not modified.
Updates #16875
Change-Id: I85329d212787958d5ad818915eb0538580a4653a
Reviewed-on: https://go-review.googlesource.com/28493
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
https://golang.org/cl/27206 fixed the dtoi function such that
it now properly parses negative number. Ironically, this causes
several other functions that depended on dtoi to now (incorrectly)
parse negative numbers.
For example, ParseCIDR("-1.0.0.0/32") used to be rejected prior to the
above CL, but is now accepted even though it is an invalid CIDR notation.
This CL fixes that regression.
We fix this by removing the signed parsing logic entirely from dtoi.
It was introduced relatively recently in https://golang.org/cl/12447
to fix a bug where an invalid port was improperly being parsed as OK.
It seems to me that the fix in that CL to the port handling logic was
sufficient such that a change to dtoi was unnecessary.
Updates #16350
Change-Id: I414bb1aa27d0a226ebd4b05a09cb40d784691b43
Reviewed-on: https://go-review.googlesource.com/28414
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TestFormats finds potential (Printf, etc.) format strings.
If they are used in a call, the format verbs are verified
based on the matching argument type against a precomputed
table of valid formats (formatMapping, below). The table
can be used to automatically rewrite format strings with
the -u flag.
Run as: go test -run Formats [-u]
A formatMapping based on the existing formats is printed
when the test is run in verbose mode (-v flag). The table
needs to be updated whenever a new (type, format) combination
is found and the format verb is not 'v' (as in "%v").
Known bugs:
- indexed format strings ("%[2]s", etc.) are not suported
(the test will fail)
- format strings that are not simple string literals cannot
be updated automatically
(the test will fail with respective warnings)
Change-Id: I1ca5bb6421d57ac78a00f1a80b9547a72837adc9
Reviewed-on: https://go-review.googlesource.com/28419
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
IndexHard4-4 1.50ms ± 2% 0.71ms ± 0% -52.36% (p=0.000 n=20+19)
This also fixes a bug, that caused a string of length 16 to use
two 8-byte comparisons instead of one 16-byte. And adds a test for
cases when partial_match fails.
Change-Id: I1ee8fc4e068bb36c95c45de78f067c822c0d9df0
Reviewed-on: https://go-review.googlesource.com/22551
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Redo of CL 28575 with fixed test.
We're in a pre-KeepAlive world for a bit yet, the old tests
were in a client which was in a post-KeepAlive world.
Change-Id: I114fd630339d761ab3306d1d99718d3cb973678d
Reviewed-on: https://go-review.googlesource.com/28582
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This has always been the case but it was not obvious from the documentation.
The reason for the quoting is that String() may return an abbreviated string,
starting with double-quote (") but ending in ... (w/o a quote). The missing
quote indicates the abbreviation (in contrast to a string ending in ...").
constant.StringVal can be used to obtain the unquoted string of a String Value.
Change-Id: Id0ba45b6ff62b3e024386ba8d907d6b3a4fcb6d7
Reviewed-on: https://go-review.googlesource.com/28576
Reviewed-by: Alan Donovan <adonovan@google.com>
Reason for revert: broke the build due to cherrypick;
relies on an unsubmitted parent CL.
Original issue's description:
> cmd/compile: ignore contentEscapes for marking nodes as escaping
>
> We can still stack allocate and VarKill nodes which don't
> escape but their content does.
>
> Fixes#16996
>
> Change-Id: If8aa0fcf2c327b4cb880a3d5af8d213289e6f6bf
> Reviewed-on: https://go-review.googlesource.com/28575
> Run-TryBot: Keith Randall <khr@golang.org>
> TryBot-Result: Gobot Gobot <gobot@golang.org>
> Reviewed-by: David Chase <drchase@google.com>
>
Change-Id: Ie1a325209de14d70af6acb2d78269b7a0450da7a
Reviewed-on: https://go-review.googlesource.com/28578
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When the divisor is known to be a constant
non-zero, don't insert panicdivide calls
that will just be eliminated later.
The main benefit here is readability of the SSA
form for compiler developers.
Change-Id: Icb7d07fc996941fbaff84524ac3e4b53d8e75fda
Reviewed-on: https://go-review.googlesource.com/28530
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
syscall.Getpagesize currently returns hard-coded page sizes on all
architectures (some of which are probably always wrong, and some of
which are definitely not always right). The runtime now has this
information, queried from the OS during runtime init, so make
syscall.Getpagesize return the page size that the runtime knows.
Updates #10180.
Change-Id: I4daa6fbc61a2193eb8fa9e7878960971205ac346
Reviewed-on: https://go-review.googlesource.com/25051
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Now that the runtime fetches the true physical page size from the OS,
make the physical page size used by heap growth a variable instead of
a constant. This isn't used in any performance-critical paths, so it
shouldn't be an issue.
sys.PhysPageSize is also renamed to sys.DefaultPhysPageSize to make it
clear that it's not necessarily the true page size. There are no uses
of this constant any more, but we'll keep it around for now.
Updates #12480 and #10180.
Change-Id: I6c23b9df860db309c38c8287a703c53817754f03
Reviewed-on: https://go-review.googlesource.com/25022
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently the physical page size assumed by the runtime is hard-coded.
On Linux the runtime at least fetches the OS page size during init and
sanity checks against the hard-coded value, but they may still differ.
On other OSes we wouldn't even notice.
Add support on all OSes to fetch the actual OS physical page size
during runtime init and lift the sanity check of PhysPageSize from the
Linux init code to general malloc init. Currently this is the only use
of the retrieved page size, but we'll add more shortly.
Updates #12480 and #10180.
Change-Id: I065f2834bc97c71d3208edc17fd990ec9058b6da
Reviewed-on: https://go-review.googlesource.com/25050
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently we assume the physical page size on ARM is 4kB. While this
is usually true, the architecture also supports 16kB and 64kB physical
pages, and Linux (and possibly other OSes) can be configured to use
these larger page sizes.
With Go 1.6, such a configuration could potentially run, but generally
resulted in memory corruption or random panics. With current master,
this configuration will cause the runtime to panic during init on
Linux when it checks the true physical page size (and will still cause
corruption or panics on other OSes).
However, the assumed physical page size only has to be a multiple of
the true physical page size, the scavenger can now deal with large
physical page sizes, and the rest of the runtime can deal with a
larger assumed physical page size than the true size. Hence, there's
little disadvantage to conservatively setting the assumed physical
page size to 64kB on ARM.
This may result in some extra memory use, since we can only return
memory at multiples of the assumed physical page size. However, it is
a simple change that should make Go run on systems configured for
larger page sizes. The following commits will make the runtime query
the actual physical page size from the OS, but this is a simple step
there.
Updates #12480.
Change-Id: I851829595bc9e0c76235c847a7b5f62ad82b5302
Reviewed-on: https://go-review.googlesource.com/25021
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Currently the time spent in scanobject is proportional to the size of
the object being scanned. Since scanobject is non-preemptible, large
objects can cause significant goroutine (and even whole application)
delays through several means:
1. If a GC assist picks up a large object, the allocating goroutine is
blocked for the whole scan, even if that scan well exceeds that
goroutine's debt.
2. Since the scheduler does not run on the P performing a large object
scan, goroutines in that P's run queue do not run unless they are
stolen by another P (which can take some time). If there are a few
large objects, all of the Ps may get tied up so the scheduler
doesn't run anywhere.
3. Even if a large object is scanned by a background worker and other
Ps are still running the scheduler, the large object scan doesn't
flush background credit until the whole scan is done. This can
easily cause all allocations to block in assists, waiting for
credit, causing an effective STW.
Fix this by splitting large objects into 128 KB "oblets" and scanning
at most one oblet at a time. Since we can scan 1–2 MB/ms, this equates
to bounding scanobject at roughly 100 µs. This improves assist
behavior both because assists can no longer get "unlucky" and be stuck
scanning a large object, and because it causes the background worker
to flush credit and unblock assists more frequently when scanning
large objects. This also improves GC parallelism if the heap consists
primarily of a small number of very large objects by letting multiple
workers scan a large objects in parallel.
Fixes#10345. Fixes#16293.
This substantially improves goroutine latency in the benchmark from
issue #16293, which exercises several forms of very large objects:
name old max-latency new max-latency delta
SliceNoPointer-12 154µs ± 1% 155µs ± 2% ~ (p=0.087 n=13+12)
SlicePointer-12 314ms ± 1% 5.94ms ±138% -98.11% (p=0.000 n=19+20)
SliceLivePointer-12 1148ms ± 0% 4.72ms ±167% -99.59% (p=0.000 n=19+20)
MapNoPointer-12 72509µs ± 1% 408µs ±325% -99.44% (p=0.000 n=19+18)
ChanPointer-12 313ms ± 0% 4.74ms ±140% -98.49% (p=0.000 n=18+20)
ChanLivePointer-12 1147ms ± 0% 3.30ms ±149% -99.71% (p=0.000 n=19+20)
name old P99.9-latency new P99.9-latency delta
SliceNoPointer-12 113µs ±25% 107µs ±12% ~ (p=0.153 n=20+18)
SlicePointer-12 309450µs ± 0% 133µs ±23% -99.96% (p=0.000 n=20+20)
SliceLivePointer-12 961ms ± 0% 1.35ms ±27% -99.86% (p=0.000 n=20+20)
MapNoPointer-12 448µs ±288% 119µs ±18% -73.34% (p=0.000 n=18+20)
ChanPointer-12 309450µs ± 0% 134µs ±23% -99.96% (p=0.000 n=20+19)
ChanLivePointer-12 961ms ± 0% 1.35ms ±27% -99.86% (p=0.000 n=20+20)
This has negligible effect on all metrics from the garbage, JSON, and
HTTP x/benchmarks.
It shows slight improvement on some of the go1 benchmarks,
particularly Revcomp, which uses some multi-megabyte buffers:
name old time/op new time/op delta
BinaryTree17-12 2.46s ± 1% 2.47s ± 1% +0.32% (p=0.012 n=20+20)
Fannkuch11-12 2.82s ± 0% 2.81s ± 0% -0.61% (p=0.000 n=17+20)
FmtFprintfEmpty-12 50.8ns ± 5% 50.5ns ± 2% ~ (p=0.197 n=17+19)
FmtFprintfString-12 131ns ± 1% 132ns ± 0% +0.57% (p=0.000 n=20+16)
FmtFprintfInt-12 117ns ± 0% 116ns ± 0% -0.47% (p=0.000 n=15+20)
FmtFprintfIntInt-12 180ns ± 0% 179ns ± 1% -0.78% (p=0.000 n=16+20)
FmtFprintfPrefixedInt-12 186ns ± 1% 185ns ± 1% -0.55% (p=0.000 n=19+20)
FmtFprintfFloat-12 263ns ± 1% 271ns ± 0% +2.84% (p=0.000 n=18+20)
FmtManyArgs-12 741ns ± 1% 742ns ± 1% ~ (p=0.190 n=19+19)
GobDecode-12 7.44ms ± 0% 7.35ms ± 1% -1.21% (p=0.000 n=20+20)
GobEncode-12 6.22ms ± 1% 6.21ms ± 1% ~ (p=0.336 n=20+19)
Gzip-12 220ms ± 1% 219ms ± 1% ~ (p=0.130 n=19+19)
Gunzip-12 37.9ms ± 0% 37.9ms ± 1% ~ (p=1.000 n=20+19)
HTTPClientServer-12 82.5µs ± 3% 82.6µs ± 3% ~ (p=0.776 n=20+19)
JSONEncode-12 16.4ms ± 1% 16.5ms ± 2% +0.49% (p=0.003 n=18+19)
JSONDecode-12 53.7ms ± 1% 54.1ms ± 1% +0.71% (p=0.000 n=19+18)
Mandelbrot200-12 4.19ms ± 1% 4.20ms ± 1% ~ (p=0.452 n=19+19)
GoParse-12 3.38ms ± 1% 3.37ms ± 1% ~ (p=0.123 n=19+19)
RegexpMatchEasy0_32-12 72.1ns ± 1% 71.8ns ± 1% ~ (p=0.397 n=19+17)
RegexpMatchEasy0_1K-12 242ns ± 0% 242ns ± 0% ~ (p=0.168 n=17+20)
RegexpMatchEasy1_32-12 72.1ns ± 1% 72.1ns ± 1% ~ (p=0.538 n=18+19)
RegexpMatchEasy1_1K-12 385ns ± 1% 384ns ± 1% ~ (p=0.388 n=20+20)
RegexpMatchMedium_32-12 112ns ± 1% 112ns ± 3% ~ (p=0.539 n=20+20)
RegexpMatchMedium_1K-12 34.4µs ± 2% 34.4µs ± 2% ~ (p=0.628 n=18+18)
RegexpMatchHard_32-12 1.80µs ± 1% 1.80µs ± 1% ~ (p=0.522 n=18+19)
RegexpMatchHard_1K-12 54.0µs ± 1% 54.1µs ± 1% ~ (p=0.647 n=20+19)
Revcomp-12 387ms ± 1% 369ms ± 5% -4.89% (p=0.000 n=17+19)
Template-12 62.3ms ± 1% 62.0ms ± 0% -0.48% (p=0.002 n=20+17)
TimeParse-12 314ns ± 1% 314ns ± 0% ~ (p=1.011 n=20+13)
TimeFormat-12 358ns ± 0% 354ns ± 0% -1.12% (p=0.000 n=17+20)
[Geo mean] 53.5µs 53.3µs -0.23%
Change-Id: I2a0a179d1d6bf7875dd054b7693dd12d2a340132
Reviewed-on: https://go-review.googlesource.com/23540
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Commit 59877bf renamed bitMarked to bitScan, since the bitmap is no
longer used for marking. However, there were several other references
to this strewn about comments and in some other constant names. Fix
these up, too.
Change-Id: I4183d28c6b01977f1d75a99ad55b150f2211772d
Reviewed-on: https://go-review.googlesource.com/28450
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Enabled checks (except for DUFF-ops which aren't implemented yet).
Added ppc64le to relevant test.
Also updated register list to reflect no-longer-reserved-
for-constants status (file was missed in that change).
Updates #16010.
Change-Id: I31b1aac19e14994f760f2ecd02edbeb1f78362e7
Reviewed-on: https://go-review.googlesource.com/28548
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For each exported symbol in package main, add its name and type to
go.plugin.tabs symbol. This is used by the runtime when loading a
plugin to return a typed interface{} value.
Change-Id: I23c39583e57180acb8f7a74d218dae4368614f46
Reviewed-on: https://go-review.googlesource.com/27818
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
1.7 introduced a significant regression compared to 1.6:
SqrtIndirect-4 2.32ns ± 0% 7.86ns ± 0% +238.79% (p=0.000 n=20+18)
This is caused by sqrtsd preserving upper part of destination register.
Which introduces dependency on previous value of X0.
In 1.6 benchmark loop didn't use X0 immediately after call:
callq *%rbx
movsd 0x8(%rsp),%xmm2
movsd 0x20(%rsp),%xmm1
addsd %xmm2,%xmm1
mov 0x18(%rsp),%rax
inc %rax
jmp loop
In 1.7 however xmm0 is used just after call:
callq *%rbx
mov 0x10(%rsp),%rcx
lea 0x1(%rcx),%rax
movsd 0x8(%rsp),%xmm0
movsd 0x18(%rsp),%xmm1
I've verified that this is caused by dependency, by inserting
XORPS X0,X0 in the beginning of math.Sqrt, which puts performance back on 1.6 level.
Splitting SQRTSD mem,reg into:
MOVSD mem,reg
SQRTSD reg,reg
Removes dependency, because MOVSD (load version)
doesn't need to preserve upper part of a register.
And reg,reg operation is solved by renamer in CPU.
As a result of this change regression is gone:
SqrtIndirect-4 7.86ns ± 0% 2.33ns ± 0% -70.36% (p=0.000 n=18+17)
This also removes old Sqrt benchmarks, in favor of benchmarks measuring latency.
Only SqrtIndirect is kept, to show impact of this patch.
Change-Id: Ic7eebe8866445adff5bc38192fa8d64c9a6b8872
Reviewed-on: https://go-review.googlesource.com/28392
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
Reviewed-by: Keith Randall <khr@golang.org>
Use existing helper function instead of importing "net/http". This
allows the go_bootstrap build to not depend on "net/http" package.
See cmd/go/http.go for details.
Fixes build bootstrap build with all.bash.
Change-Id: I2fd0fb01af7774f1690a353af22137680ec78170
Reviewed-on: https://go-review.googlesource.com/28531
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is a slightly rough, skeletal implementation.
We will polish and add to it through use.
.github/ISSUE_TEMPLATE will be updated in a
separate CL.
Fixes#16635
Change-Id: Icf284170d87e61b5b643366c85cffc48f149f730
Reviewed-on: https://go-review.googlesource.com/28485
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The ctxt parameter is always set to 0 on entry into anylit so make this
parameter a literal constant, and where possibly remove ctxt as a parameter
where it is known to be a constant zero.
Passes toolstash -cmp.
This is a re-creation of CL 28221 by Dave Cheney.
That CL was graciously reverted in CL 28480
to make merging other CLs easier.
Change-Id: If7a57bf0e27774d9890adbc30af9fabb4aff1058
Reviewed-on: https://go-review.googlesource.com/28483
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Does not pass toolstash -cmp due to changed export data,
but the cmd/go binary (which doesn't contain export data)
is bit-for-bit identical.
Change-Id: I6b12f9de18cf7da528e9207dccbf8f08c969f142
Reviewed-on: https://go-review.googlesource.com/26753
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This custom version is identical to CheckLoweredPhi. The addition of
CheckLoweredPhi likely raced with adding PPC64.
Change-Id: I294dcb758d312e93fb8842f4d1e12bf0f63a1e06
Reviewed-on: https://go-review.googlesource.com/28479
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The ctxt parameter is always set to 0 on entry into anylit so make this
parameter a literal constant, and where possibly remove ctxt as a parameter
where it is known to be a constant zero.
Change-Id: I3e76e06456d7b1a1ea875ffeb2efefa4a1ff5a7e
Reviewed-on: https://go-review.googlesource.com/28221
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The http.Transport's retry can't retry requests with non-nil
bodies. When cloning an incoming server request into an outgoing
client request, nil out the Body field if the ContentLength is 0. (For
server requests, Body is always non-nil, even for GET, HEAD, etc.)
Also, don't use the deprecated CancelRequest and use Context instead.
And don't set Proto, ProtoMajor, ProtoMinor. Those are ignored in
client requests, which was probably a later documentation
clarification.
Fixes#16036
Updates #16696 (remove useless Proto lines)
Change-Id: I70a869e9bd4bf240c5838e82fb5aa695a539b343
Reviewed-on: https://go-review.googlesource.com/28412
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
The use of PAX headers can modify the overall file size, thus the
formerly created regFileReader may be stale.
The relevant PAX specification for this behavior is:
<<<
Any fields in the preceding optional extended header shall override
the associated fields in this header block for this file.
>>>
Where "optional extended header" refers to the preceding PAX header.
Where "this header block" refers to the subsequent USTAR header.
Fixes#15573Fixes#15564
Change-Id: I83b1c3f05a9ca2d3be38647425ad21a9fe450ee2
Reviewed-on: https://go-review.googlesource.com/28418
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We reset global buffer only if its pos != 0.
We ought to do it always, but queue it only if pos != 0.
This is a latent bug. Currently it does not fire because
whenever we create a global buffer, we increment pos.
Change-Id: I01e28ae88ce9a5412497c524391b8b7cb443ffd9
Reviewed-on: https://go-review.googlesource.com/25574
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Currently this message says "invalid stack pointer", which could be
interpreted as the value of SP being invalid. Change it to "invalid
pointer found on stack" to emphasize that it's a pointer on the stack
that's invalid.
Updates #16948.
Change-Id: I753624f8cc7e08cf13d3ea5d9c790cc4af9fa372
Reviewed-on: https://go-review.googlesource.com/28430
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The maximum input plaintext for GCM is 64GiB - 64. Since the GCM
interface is one-shot, it's very hard to hit this in Go (one would need
a 64GiB buffer in memory), but we should still enforce this limit.
Thanks to Quan Nguyen for pointing it out.
Change-Id: Icced47bf8d4d5dfbefa165cf13e893205c9577b8
Reviewed-on: https://go-review.googlesource.com/28410
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
RFC 2616, section 14.10 says:
>>>
HTTP/1.1 proxies MUST parse the Connection header field before a message
is forwarded and, for each connection-token in this field, remove any
header field(s) from the message with the same name as the
connection-token. Connection options are signaled by the presence of a
connection-token in the Connection header field, not by any
corresponding additional header field(s), since the additional header
field may not be sent if there are no parameters associated with that
connection option.
<<<
The same requirement was included in RFC 7230, section 6.1.
Fixes#16875
Change-Id: I57ad4a4a17775537c8810d0edd7de1604317b5fa
Reviewed-on: https://go-review.googlesource.com/27970
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
While it was previously explicitly documented that "the default Source"
is safe for concurrent use, a careless reader can interpret that as
meaning "the implementation of the Source interface created by functions
in this package" rather than "the default shared Source used by
top-level functions". Be explicit that the Source returned by NewSource
is not safe for use by multiple goroutines.
Fixes#3611.
Change-Id: Iae4bc04c3887ad6e2491e36e38feda40324022c5
Reviewed-on: https://go-review.googlesource.com/25501
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Current banners are:
##### Building Go bootstrap tool.
##### Building Go toolchain using /Users/josh/go/1.4.
##### Building go_bootstrap for host, darwin/amd64.
##### Building packages and commands for darwin/amd64.
##### Testing packages.
##### GOMAXPROCS=2 runtime -cpu=1,2,4
##### Testing without libgcc.
##### sync -cpu=10
##### ../misc/cgo/stdio
##### ../misc/cgo/life
##### ../misc/cgo/fortran
##### ../misc/cgo/test
##### Testing race detector
##### ../misc/cgo/testso
##### ../misc/cgo/testsovar
##### misc/cgo/testcarchive
##### ../misc/cgo/testcshared
##### ../misc/cgo/errors
##### ../test/bench/go1
##### ../test
##### API check
One of these things is not like the others.
Fix that.
Change-Id: If0bd8ea9293d73b5d1b70d6bf676bd9192991505
Reviewed-on: https://go-review.googlesource.com/26759
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Per RFC 7230, Section 3.3.2: "A server MUST NOT send a Content-Length
header field in any response with a status code of 1xx (Informational)
or 204 (No Content).".
Fixes#16942
Change-Id: I8006c76c126304e13618966e6eafb08a3885d3cd
Reviewed-on: https://go-review.googlesource.com/28351
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In Go 1.0, the Config struct consisted only of exported fields.
In Go 1.1, it started to grow private, uncopyable fields (sync.Once,
sync.Mutex, etc).
Ever since, people have been writing their own private Config.Clone
methods, or risking it and doing a language-level shallow copy and
copying the unexported sync variables.
Clean this up and export the Config.clone method as Config.Clone.
This matches the convention of Template.Clone from text/template and
html/template at least.
Fixes#15771
Updates #16228 (needs update in x/net/http2 before fixed)
Updates #16492 (not sure whether @agl wants to do more)
Change-Id: I48c2825d4fef55a75d2f99640a7079c56fce39ca
Reviewed-on: https://go-review.googlesource.com/28075
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
The tar.Reader guarantees stickiness of errors. Ensuring this property means
that the methods of Reader need to be consistent about whose responsibility it
is to actually ensure that errors are sticky.
In this CL, we make it only the responsibility of the exported methods
(Next and Read) to store tr.err. All other methods just return the error as is.
As part of this change, we also check the error value of mergePAX (and test
that it properly detects invalid PAX files). Since the value of mergePAX was
never used before, we change it such that it always returns ErrHeader instead
of strconv.SyntaxError. This keeps it consistent with other usages of strconv
in the same tar package.
Change-Id: Ia1c31da71f1de4c175da89a385dec665d3edd167
Reviewed-on: https://go-review.googlesource.com/28215
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This truly is a common point of confusion that deserves
explanation in the FAQ.
Change-Id: Ie624e31a2042ca99626fe7570d9c8c075aae6a84
Reviewed-on: https://go-review.googlesource.com/28275
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We used to reserve X15 to implement the 3-operand floating-point
sub/div ops with the 2-operand sub/div that 386/amd64 gives us.
Now that resultInArg0 is implemented, we no longer need to
reserve X15 (X7 on 386).
Fixes#15584
Change-Id: I978e6c0a35236e89641bfc027538cede66004e82
Reviewed-on: https://go-review.googlesource.com/28272
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Instead of saving all pragmas and processing them after parsing is
finished, process them immediately during scanning like the current
lexer does.
This is a bit unfortunate because it means we can't use
syntax.ParseFile to concurrently parse files yet, but it fixes how we
report syntax errors in the presence of //line pragmas.
While here, add a bunch more gcCompat entries to syntax/parser.go to
get "go build -toolexec='toolstash -cmp' std cmd" passing. There are
still a few remaining cases only triggered building unit tests, but
this seems like a nice checkpoint.
Change-Id: Iaf3bbcf2849857a460496f31eea228e0c585ce13
Reviewed-on: https://go-review.googlesource.com/28226
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Major reorganization of the crc32 code:
- The arch-specific files now implement a well-defined interface
(documented in crc32.go). They no longer have the responsibility of
initializing and falling back to a non-accelerated implementation;
instead, that happens in the higher level code.
- The non-accelerated algorithms are moved to a separate file with no
dependencies on other code.
- The "cutoff" optimization for slicing-by-8 is moved inside the
algorithm itself (as opposed to every callsite).
Tests are significantly improved:
- direct tests for the non-accelerated algorithms.
- "cross-check" tests for arch-specific implementations (all archs).
- tests for misaligned buffers for both IEEE and Castagnoli.
Fixes#16909.
Change-Id: I9b6dd83b7a57cd615eae901c0a6d61c6b8091c74
Reviewed-on: https://go-review.googlesource.com/27935
Reviewed-by: Keith Randall <khr@golang.org>
cmd/go links mingwex and mingw32 libraries to every package it builds.
This breaks when 2 different packages call same gcc standard library
function pow. gcc linker appends pow implementation to the compiled
package, and names that function "pow". But when these 2 compiled
packages are linked together into the final executable, linker
complains, because it finds two "pow" functions with the same name.
This CL stops linking of mingwex and mingw32 during package build -
that leaves pow function reference unresolved. pow reference gets
resolved as final executable is built, by having both internal and
external linker use mingwex and mingw32 libraries.
Fixes#8756
Change-Id: I50ddc79529ea5463c67118d668488345ecf069bc
Reviewed-on: https://go-review.googlesource.com/26670
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The goal for these examples is to show how to mirror the
functionality of the sha256sum Unix utility, a common checksumming
tool, using the Go standard library.
Add a newline at the end of the input, so users will get the same
output if they type `echo 'hello world' | sha256sum`, since the
builtin shell echo appends a newline by default. Also use hex output
(instead of the shorter base64) since this is the default output
encoding for shasum/sha256sum.
Change-Id: I0036874b3cc5ba85432bfcb86f81b51c4e0238fd
Reviewed-on: https://go-review.googlesource.com/24868
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As @pmarks-net said in the bug, this is something of a prisoner's
dilemma, but it does help people who occasionally report problems.
This is temporary. IPv6 is happening regardless of our decision here,
so we'll do this for now.
Fixes#15324
Change-Id: I8cc29c6efa56222970996c71182fc9ee89d78539
Reviewed-on: https://go-review.googlesource.com/28077
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Fix bug in UnknownAuthorityError.Error that would never allow Org
Name to be inserted into error message if the Common Name was empty.
Create tests for all three paths in UnknownAuthorityError.Error
Change-Id: Id8afc444e897ef549df682d93a8563fd9de22a2b
Reviewed-on: https://go-review.googlesource.com/27992
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On ARM64, MIPS64, and PPC64, some floating point registers were
reserved for constants 0, 1, 2, 0.5, etc. This CL removes them.
On ARM64, they are never used. On MIPS64 and PPC64, the only use
case is a multiplication-by-2 in the old backend of the compiler,
which is replaced with an addition.
Change-Id: I737cbf43283756e3408964fc88c567a938c57036
Reviewed-on: https://go-review.googlesource.com/28095
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change makes sure that tests are run with the correct
version of the go tool. The correct version is the one that
we invoked with "go test", not the one that is first in our path.
Fixes#16577
Change-Id: If22c8f8c3ec9e7c35d094362873819f2fbb8559b
Reviewed-on: https://go-review.googlesource.com/28089
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use terms like "equal" and "identical types" to match the Go spec,
rather than inventing a new explanation. See also discussion on
golang.org/cl/27170.
Updates #16348.
Change-Id: I0fe0bd01c0d1da3c8937a579c2ba44cf1eb16b71
Reviewed-on: https://go-review.googlesource.com/28054
Reviewed-by: Rob Pike <r@golang.org>
Fixes C compiler warning:
./main.go:54:1: warning: control reaches end of non-void function [-Wreturn-type]
Should help fix the linux builders
that broke due to CL 23005.
Change-Id: Ib0630798125e35a12f99d666b7ffe7b3196f0ecc
Reviewed-on: https://go-review.googlesource.com/28176
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Consider a switch statement like:
switch x {
case 1:
// ...
case 2, 3, 4, 5, 6:
// ...
case 5:
// ...
}
Prior to this CL, the generated code treated
2, 3, 4, 5, and 6 independently in a binary search.
With this CL, the generated code checks whether
2 <= x && x <= 6.
walkinrange then optimizes that range check
into a single unsigned comparison.
Experiments suggest that the best min range size
is 2, using binary size as a proxy for optimization.
Binary sizes before/after this CL:
cmd/compile: 14209728 / 14165360
cmd/go: 9543100 / 9539004
Change-Id: If2f7fb97ca80468fa70351ef540866200c4c996c
Reviewed-on: https://go-review.googlesource.com/26770
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
These were a hack abstraction for before FuncType existed.
The result value from calling FuncType() could be saved, but this
maintains the current idiom of consistently using t.FuncType().foo
everywhere in case we choose to evolve the API further.
Change-Id: I81f19aaeab6fb7caa2d4da8bf0bbbc358ab970d0
Reviewed-on: https://go-review.googlesource.com/28150
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Current code assumes there are not ".." in the Clean(path).
That's not true. Clean doesn't handle leading "..", so we need to stop
normalization if we see "..".
Fixes#16793
Change-Id: I0a7901bedac17f1210b134d593ebd9f5e8483775
Reviewed-on: https://go-review.googlesource.com/27410
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Ordering fix: this CL swaps the order of the log write and the channel close
in WroteRequest. I could reproduce the bug by putting a sleep between the two
when the channel close was first. It needs to happen after the log.
Data race: use the log buffer's mutex when reading too. Not really
important once the ordering fix above is fixed (since nobody is
concurrently writing anymore), but for consistency.
Fixes#16414
Change-Id: If6657884e67be90b4455c8f5a6f7bc6981999ee4
Reviewed-on: https://go-review.googlesource.com/28078
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Generate a for loop for ranging over strings that only needs to call
the runtime function charntorune for non ASCII characters.
This provides faster iteration over ASCII characters and slightly
faster iteration for other characters.
The runtime function charntorune is changed to take an index from where
to start decoding and returns the index after the last byte belonging
to the decoded rune.
All call sites of charntorune in the runtime are replaced by a for loop
that will be transformed by the compiler instead of calling the charntorune
function directly.
go binary size decreases by 80 bytes.
godoc binary size increases by around 4 kilobytes.
runtime:
name old time/op new time/op delta
RuneIterate/range/ASCII-4 43.7ns ± 3% 10.3ns ± 4% -76.33% (p=0.000 n=44+45)
RuneIterate/range/Japanese-4 72.5ns ± 2% 62.8ns ± 2% -13.41% (p=0.000 n=49+50)
RuneIterate/range1/ASCII-4 43.5ns ± 2% 10.4ns ± 3% -76.18% (p=0.000 n=50+50)
RuneIterate/range1/Japanese-4 72.5ns ± 2% 62.9ns ± 2% -13.26% (p=0.000 n=50+49)
RuneIterate/range2/ASCII-4 43.5ns ± 3% 10.3ns ± 2% -76.22% (p=0.000 n=48+47)
RuneIterate/range2/Japanese-4 72.4ns ± 2% 62.7ns ± 2% -13.47% (p=0.000 n=50+50)
strings:
name old time/op new time/op delta
IndexRune-4 64.7ns ± 5% 22.4ns ± 3% -65.43% (p=0.000 n=25+21)
MapNoChanges-4 269ns ± 2% 157ns ± 2% -41.46% (p=0.000 n=23+24)
Fields-4 23.0ms ± 2% 19.7ms ± 2% -14.35% (p=0.000 n=25+25)
FieldsFunc-4 23.1ms ± 2% 19.6ms ± 2% -14.94% (p=0.000 n=25+24)
name old speed new speed delta
Fields-4 45.6MB/s ± 2% 53.2MB/s ± 2% +16.87% (p=0.000 n=24+25)
FieldsFunc-4 45.5MB/s ± 2% 53.5MB/s ± 2% +17.57% (p=0.000 n=25+24)
Updates #13162
Change-Id: I79ffaf828d82bf9887592f08e5cad883e9f39701
Reviewed-on: https://go-review.googlesource.com/27853
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Martin Möhrmann <martisch@uos.de>
I was confused by the current wording. This wording
answers the question more clearly.
Thanks to Robert Griesemer for suggestions.
Fixes#16916
Change-Id: I50187c8df2db661b9581f4b3c5d5c279d2f9af41
Reviewed-on: https://go-review.googlesource.com/28052
Reviewed-by: Robert Griesemer <gri@golang.org>
Uses the same implementation as runtime/internal/atomic.
Reorganize the intrinsic detector to make it more table-driven.
Also works on amd64p32.
Change-Id: I7a5238951d6018d7d5d1bc01f339f6ee9282b2d0
Reviewed-on: https://go-review.googlesource.com/28076
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Adds an Until() function that returns the duration until the given time.
This compliments the existing Since() function and makes writing
expressions that have expiration times more readable; for example:
<-After(time.Until(connExpires)):
Fixes#14595
Change-Id: I87998a924b11d4dad5512e010b29d2da6b123456
Reviewed-on: https://go-review.googlesource.com/20118
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
In the case of a file being deleted while Readdir was running, it was
possible for File.Readdir to return an empty slice and a nil error,
counter to its documentation.
Fixes#16919
Change-Id: If0e42882eea52fbf5530317a1895f3829ea8e67b
Reviewed-on: https://go-review.googlesource.com/28056
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The current padding in the 'p' struct is hardcoded at 64 bytes. It should be the
cache line size. On ppc64x, the current value is only okay because sys.CacheLineSize
is wrong at 64 bytes. This change fixes that by making the padding equal to the
cache line size. It also fixes the cache line size for ppc64/ppc64le to 128 bytes.
Fixes#16477
Change-Id: Ib7ec5195685116eb11ba312a064f41920373d4a3
Reviewed-on: https://go-review.googlesource.com/25370
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The go tool used to avoid passing -fsanitize=memory when building
runtime/cgo. That was originally to avoid an msan error, but that error
was fixed anyhow for issue #13815. And building runtime/cgo with
-fsanitize=memory corrects the handling of the context traceback
function when the traceback function itself is built with
-fsanitize=memory.
Change-Id: I4bf5c3d21de6b2eb540600435ae47f5820d17464
Reviewed-on: https://go-review.googlesource.com/24855
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The existing implementation used a pure go implementation, leading to slow
cryptographic performance.
Implemented mulWW, subVV, mulAddVWW, addMulVVW, and bitLen for
ppc64{le}.
Implemented divWW for ppc64le only, as the DIVDEU instruction is only
available on Power8 or newer.
benchcmp output:
benchmark old ns/op new ns/op delta
BenchmarkSignP384 28934360 10877330 -62.41%
BenchmarkRSA2048Decrypt 41261033 5139930 -87.54%
BenchmarkRSA2048Sign 45231300 7610985 -83.17%
Benchmark3PrimeRSA2048Decrypt 20487300 2481408 -87.89%
Fixes#16621
Change-Id: If8b68963bb49909bde832f2bda08a3791c4f5b7a
Reviewed-on: https://go-review.googlesource.com/26951
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <munday@ca.ibm.com>
Where possible generate calls to runtime makeslice with int arguments
during compile time instead of makeslice with int64 arguments.
This eliminates converting arguments for calls to makeslice with
int64 arguments for platforms where int64 values do not fit into
arguments of type int.
godoc 386 binary shrinks by approximately 12 kilobyte.
amd64:
name old time/op new time/op delta
MakeSlice-2 29.8ns ± 1% 29.8ns ± 1% ~ (p=1.000 n=24+24)
386:
name old time/op new time/op delta
MakeSlice-2 52.3ns ± 0% 45.9ns ± 0% -12.17% (p=0.000 n=25+22)
Fixes #15357
Change-Id: Icb8701bb63c5a83877d26c8a4b78e782ba76de7c
Reviewed-on: https://go-review.googlesource.com/27851
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This shortens the export format by 1 byte for each exported ODCL
node in inlined function bodies.
Maintain backward compatibility by updating format version and
continue to accept older format.
Change-Id: I549bb3ade90bc0f146decf8016d5c9c3f14eb293
Reviewed-on: https://go-review.googlesource.com/27999
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
New beginners are not familiar with open(2)-style masking of the
flags. Add an example demonstrates the flag or'ing.
Change-Id: Ifa8009c55173ba0dc6642c1d3b3124c766b1ebbb
Reviewed-on: https://go-review.googlesource.com/27996
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 24930 altered the default InstallSuffix
for mobile platforms.
Update androidtest.bash to reflect this.
This reverts CL 16151.
A subsequent CL will make this more robust,
but it will take more discussion and review.
In the meantime, this fixes the build.
Change-Id: Ia19ca2c9bab7b79c9cf24beeca64ecddaa60289c
Reviewed-on: https://go-review.googlesource.com/27927
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The previous template used an ordered list, but the formatting always
breaks when users paste quoted snippets of code or command outputs.
It is also harder to visually parse because items in ordered lists
are only indented but not highlighted in any way.
Change-Id: I73c89e9f0465aef41093f5c54d11bb0d12ff8c8d
Reviewed-on: https://go-review.googlesource.com/27252
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When SSE is available, we don't need the Table. However, it is
returned as a handle by MakeTable. Fix this to always generate
the table.
Further cleanup is discussed in #16909.
Change-Id: Ic05400d68c6b5d25073ebd962000451746137afc
Reviewed-on: https://go-review.googlesource.com/27934
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Atomic add rules were depending on CSE to combine duplicate atomic ops.
With -N, CSE doesn't run.
Redo the rules for atomic add so there's only one atomic op.
Introduce an add-to-first-part-of-tuple pseudo-ops to make the atomic add result correct.
Change-Id: Ib132247051abe5f80fefad6c197db8df8ee06427
Reviewed-on: https://go-review.googlesource.com/27991
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
genzabbrs.go uses whatever zoneinfo database available on the system.
This makes genzabbrs.go output change from system to system. Adjust
go:generate line to always use $GOROOT/lib/time/zoneinfo.zip, so it
does not matter who runs the command.
Also move go:generate line into zoneinfo.go, so it can be run
on Unix (see #16368 for details).
Fixes#15802.
Change-Id: I8ae4818aaf40795364e180d7bb4326ad7c07c370
Reviewed-on: https://go-review.googlesource.com/27832
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add support for writing TLS client random and master secret
in NSS key log format.
https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/Key_Log_Format
Normally this is enabled by a developer debugging TLS based
applications, especially HTTP/2, by setting the KeyLogWriter
to an open file. The keys negotiated in handshake are then
logged and can be used to decrypt TLS sessions e.g. in Wireshark.
Applications may choose to add support similar to NSS where this
is enabled by environment variable, but no such mechanism is
built in to Go. Instead each application must explicitly enable.
Fixes#13057.
Change-Id: If6edd2d58999903e8390b1674ba4257ecc747ae1
Reviewed-on: https://go-review.googlesource.com/27434
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Starting point for uniform use of printer in fmt.go.
It provides a hook to store additional state (and
remove global variables) and should also be more
efficient and cleaner than the mix of string concatenation
and bytes.Buffer use we have now.
Change-Id: I72de14b01850cca32d407a1cb16c894179ea8848
Reviewed-on: https://go-review.googlesource.com/27916
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The Go1.7 export format didn't encode the field package for
blank struct fields (#15514). Re-introduce support for that
format so we can read it w/o error.
For #16881.
Change-Id: Ib131d41aac56dbf970aab15ae7e75ef3944b412d
Reviewed-on: https://go-review.googlesource.com/27912
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Port of changes made to compiler in
https://go-review.googlesource.com/27814.
Correctly handle export format version 0 (we only do this
in x/tools/gcimporter15 at the moment - this is a backport
of that code for struct fields).
Added tests for version handling and detection of corrupted
export data.
Fixes#16881.
Change-Id: I246553c689c89ef5c7fedd1e43717504c2838804
Reviewed-on: https://go-review.googlesource.com/27816
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For reasons I have forgotten typelinksinit processed modules backwards.
(I suspect this was an attempt to process types in the executing
binary first.)
It does not appear to be necessary, and it is not the order we want
when a module can be loaded at an arbitrary point during a program's
execution as a plugin. So reverse the order.
While here, make it safe to call typelinksinit multiple times.
Change-Id: Ie10587c55c8e5efa0542981efb6eb3c12dd59e8c
Reviewed-on: https://go-review.googlesource.com/27822
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add the following optimizations:
- fold constants
- fold address into load/store
- simplify extensions and conditional branches
- remove nil checks
Turn on SSA on MIPS64 by default, and toggle the tests.
Fixes#16359.
Change-Id: I7f1e38c2509e22e42cd024e712990ebbe47176bd
Reviewed-on: https://go-review.googlesource.com/27870
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
FIDBR and FIEBR can be used for floating-point to integer rounding.
The relevant functions (Ceil, Floor and Trunc) will be updated
in a future CL.
Change-Id: I5952d67ab29d5ef8923ff1143e17a8d30169d692
Reviewed-on: https://go-review.googlesource.com/27826
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Adds the following s390x instructions from the interlocked access
facility:
* LAA(G) - load and add
* LAAL(G) - load and add logical
* LAN(G) - load and and
* LAX(G) - load and exclusive or
* LAO(G) - load and or
These instructions can be used for atomic arithmetic/logical
operations. The atomic packages will be updated in future CLs.
Change-Id: Idc850ac6749b3e778fda3da66bcd864f6b1df375
Reviewed-on: https://go-review.googlesource.com/27871
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The compiler was canonicalizing unnamed types of the form
struct { i int }
across packages, even though an unexported field i should not be
accessible from other packages.
The fix requires both qualifying the field name in the string used by
the compiler to distinguish the type, and ensuring the struct's pkgpath
is set in the rtype version of the data when the type being written is
not part of the localpkg.
Fixes#16616
Change-Id: Ibab160b8b5936dfa47b17dbfd48964a65586785b
Reviewed-on: https://go-review.googlesource.com/27791
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The Windows version of Stat calls Readlink iteratively until
reaching a non-symlink file.
If the given file is a circular symlink, It never stops.
This CL defines the maximum number of symlink loop count.
If the loop count will exceed that number, Stat will return error.
Fixes#16538
Change-Id: Ia9f3f2259a8d32801461c5041cc24a34f9f81009
Reviewed-on: https://go-review.googlesource.com/27580
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Import errors due to unexpected format are virtually
always due to version skew. Don't panic but report a
good error message (incl. hint that the imported package
needs to be reinstalled) if not in debugFormat mode.
Recognize export data format version and store it so
it can be used to automatically handle minor version
differences. We did this before, but not very well.
No export data format changes.
Manually tested with corrupted export data.
For #16881.
Change-Id: I53ba98ef747b1c81033a914bb61ee52991f35a90
Reviewed-on: https://go-review.googlesource.com/27814
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
As far as I can tell, this check has been
non-functional since it was introduced.
This cuts 57k off cmd/go and 70k off cmd/compile.
Based on golang.org/cl/24710 by Josh Bleecher Snyder.
Change-Id: I1162a066971df1a067b50afa1cfa0819a6913574
Reviewed-on: https://go-review.googlesource.com/27830
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Inline atomic reads and writes on amd64. There's no reason
to pay the overhead of a call for these.
To keep atomic loads from being reordered, we make them
return a <value,memory> tuple.
Change the meaning of resultInArg0 for tuple-generating ops
to mean the first part of the result tuple, not the second.
This means we can always put the store part of the tuple last,
matching how arguments are laid out. This requires reordering
the outputs of add32carry and sub32carry and their descendents
in various architectures.
benchmark old ns/op new ns/op delta
BenchmarkAtomicLoad64-8 2.09 0.26 -87.56%
BenchmarkAtomicStore64-8 7.54 5.72 -24.14%
TBD (in a different CL): Cas, Or8, ...
Change-Id: I713ea88e7da3026c44ea5bdb56ed094b20bc5207
Reviewed-on: https://go-review.googlesource.com/27641
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Add missing function prototypes.
Fix function prototypes.
Use FP references instead of SP references.
Fix variable names.
Update comments.
Clean up whitespace. (Not for vet.)
All fairly minor fixes to make vet happy.
Updates #11041
Change-Id: Ifab2cdf235ff61cdc226ab1d84b8467b5ac9446c
Reviewed-on: https://go-review.googlesource.com/27713
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Factor out the regular file handling logic into handleRegularFile
from nextHeader. We will need to reuse this logic when fixing #15573
in a future CL.
Factor out the sparse file handling logic into handleSparseFile.
Currently this logic is split between nextHeader (for GNU sparse
files) and Next (for PAX sparse files). Instead, we move this
related code into a single method.
There is no overall logic change. Thus, no unit tests.
Updates #15573#15564
Change-Id: I3b8270d8b4e080e77d6c0df6a123d677c82cc466
Reviewed-on: https://go-review.googlesource.com/27454
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
RFC 7233, section 4.4 says:
>>>
For byte ranges, failing to overlap the current extent means that the
first-byte-pos of all of the byte-range-spec values were greater than the
current length of the selected representation. When this status code is
generated in response to a byte-range request, the sender SHOULD generate a
Content-Range header field specifying the current length of the selected
representation
<<<
Thus, we should send the Content-Range only if none of the ranges
overlap.
Fixes#15798.
Change-Id: Ic9a3e1b3a8730398b4bdff877a8f2fd2e30149e3
Reviewed-on: https://go-review.googlesource.com/24212
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL reworks walkcompare for clarity and concision.
It also makes one significant functional change.
(The functional change is hard to separate cleanly
from the cleanup, so I just did them together.)
When inlining and unrolling an equality comparison
for a small struct or array, compare the elements like:
a[0] == b[0] && a[1] == b[1]
rather than
pa := &a
pb := &b
pa[0] == pb[0] && pa[1] == pb[1]
The result is the same, but taking the address
and working through the indirect
forces the backends to generate less efficient code.
This is only an improvement with the SSA backend.
However, every port but s390x now has a working
SSA backend, and switching to the SSA backend
by default everywhere is a priority for Go 1.8.
It thus seems reasonable to start to prioritize
SSA performance over the old backend.
Updates #15303
Sample code:
type T struct {
a, b int8
}
func g(a T) bool {
return a == T{1, 2}
}
SSA before:
"".g t=1 size=80 args=0x10 locals=0x8
0x0000 00000 (badeq.go:7) TEXT "".g(SB), $8-16
0x0000 00000 (badeq.go:7) SUBQ $8, SP
0x0004 00004 (badeq.go:7) FUNCDATA $0, gclocals·23e8278e2b69a3a75fa59b23c49ed6ad(SB)
0x0004 00004 (badeq.go:7) FUNCDATA $1, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
0x0004 00004 (badeq.go:8) MOVBLZX "".a+16(FP), AX
0x0009 00009 (badeq.go:8) MOVB AL, "".autotmp_0+6(SP)
0x000d 00013 (badeq.go:8) MOVBLZX "".a+17(FP), AX
0x0012 00018 (badeq.go:8) MOVB AL, "".autotmp_0+7(SP)
0x0016 00022 (badeq.go:8) MOVB $0, "".autotmp_1+4(SP)
0x001b 00027 (badeq.go:8) MOVB $1, "".autotmp_1+4(SP)
0x0020 00032 (badeq.go:8) MOVB $2, "".autotmp_1+5(SP)
0x0025 00037 (badeq.go:8) MOVBLZX "".autotmp_0+6(SP), AX
0x002a 00042 (badeq.go:8) MOVBLZX "".autotmp_1+4(SP), CX
0x002f 00047 (badeq.go:8) CMPB AL, CL
0x0031 00049 (badeq.go:8) JNE 70
0x0033 00051 (badeq.go:8) MOVBLZX "".autotmp_0+7(SP), AX
0x0038 00056 (badeq.go:8) CMPB AL, $2
0x003a 00058 (badeq.go:8) SETEQ AL
0x003d 00061 (badeq.go:8) MOVB AL, "".~r1+24(FP)
0x0041 00065 (badeq.go:8) ADDQ $8, SP
0x0045 00069 (badeq.go:8) RET
0x0046 00070 (badeq.go:8) MOVB $0, AL
0x0048 00072 (badeq.go:8) JMP 61
SSA after:
"".g t=1 size=32 args=0x10 locals=0x0
0x0000 00000 (badeq.go:7) TEXT "".g(SB), $0-16
0x0000 00000 (badeq.go:7) NOP
0x0000 00000 (badeq.go:7) NOP
0x0000 00000 (badeq.go:7) FUNCDATA $0, gclocals·23e8278e2b69a3a75fa59b23c49ed6ad(SB)
0x0000 00000 (badeq.go:7) FUNCDATA $1, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
0x0000 00000 (badeq.go:8) MOVBLZX "".a+8(FP), AX
0x0005 00005 (badeq.go:8) CMPB AL, $1
0x0007 00007 (badeq.go:8) JNE 25
0x0009 00009 (badeq.go:8) MOVBLZX "".a+9(FP), CX
0x000e 00014 (badeq.go:8) CMPB CL, $2
0x0011 00017 (badeq.go:8) SETEQ AL
0x0014 00020 (badeq.go:8) MOVB AL, "".~r1+16(FP)
0x0018 00024 (badeq.go:8) RET
0x0019 00025 (badeq.go:8) MOVB $0, AL
0x001b 00027 (badeq.go:8) JMP 20
Change-Id: I120185d58012b7bbcdb1ec01225b5b08d0855d86
Reviewed-on: https://go-review.googlesource.com/22277
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If the walker function called on a top-level file returns SkipDir,
then (before this change) Walk would return SkipDir, which the
documentation implies will not happen.
Fixes#16280.
Change-Id: I37d63bdcef7af4b56e342b624cf0d4b42e65c297
Reviewed-on: https://go-review.googlesource.com/24780
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Recreated original favicon with svg. Note, the rasterizations are hand
tweaked for crispness and straight export will not give the same results.
Fixes#6938
Change-Id: I9bf7b59028711361c29365b145932d90af419b69
Reviewed-on: https://go-review.googlesource.com/26850
Reviewed-by: Chris Broadfoot <cbro@golang.org>
- implement *, /, %, shifts, Zero, Move.
- fix mistakes in comparison.
- fix floating point rounding.
- handle RetJmp in assembler (which was not handled, as a consequence
Duff's device was disabled in the old backend.)
all.bash now passes with SSA on.
Updates #16359.
Change-Id: Ia14eed0ed1176b5d800592080c8f53dded7fe73f
Reviewed-on: https://go-review.googlesource.com/27592
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The type sigtabtt was introduced by an automated tool in
https://golang.org/cl/167550043. It was the Go version of the C type
SigTab. However, when the C code using SigTab was converted to Go in
https://golang.org/cl/168500044 it was rewritten to use a different Go
type, sigTabT, rather than sigtabtt (the difference being that sigTabT
uses string where sigtabtt uses *int8 from the C type char*). So this is
just a dreg from the conversion that was never actually used.
Change-Id: I2ec6eb4b25613bf5e5ad1dbba1f4b5ff20f80f55
Reviewed-on: https://go-review.googlesource.com/27691
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Replace the various calls to Fprintf(ctxt.Bso, ...) with a helper,
ctxt.Logf. This also addresses the various inconsistent flushing of
ctxt.Bso.
Because we have two Link structures, add Link.Logf in both places.
Change-Id: I23093f9b9b3bf33089a0ffd7f815f92dcd1a1fa1
Reviewed-on: https://go-review.googlesource.com/27730
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This change moves the ld.Cpos function to a method on coutbuf. This is
part of a larger change that makes ld.outbuf look more like a bio.Buf in
an effort to eventually replace the former with the latter.
Change-Id: I506f7131935a2aa903fa302a0fab0c5be50220fd
Reviewed-on: https://go-review.googlesource.com/27578
Run-TryBot: Dave Cheney <dave@cheney.net>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This should improve the precision of time.now() from microseconds
to nanoseconds.
Also, modify runtime.nanotime to keep it consistent with cleanup
done to time.now.
Updates #11222 for s390x.
Change-Id: I27864115ea1fee7299360d9003cd3a8355f624d3
Reviewed-on: https://go-review.googlesource.com/27710
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In many places where ctx.Bso.Flush is used as the target for some debug
logging, ctx.Bso.Flush is called unconditionally. In the majority of
cases where debug logging is not enabled, this means Flush is called
many times when there is nothing to be flushed (it will be called anyway
when ctx.Bso is eventually closed), sometimes in a loop.
Avoid this by moving the ctx.Bso.Flush call into the same condition
block as the debug print. This pattern was previously applied
sporadically.
Change-Id: I0444cb235cc8b9bac51a59b2e44e59872db2be06
Reviewed-on: https://go-review.googlesource.com/27579
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Extract "cgo -dynimport" and "ld -r" logic into separate helper
methods to make (*builder).cgo somewhat more manageable.
Fixes#16650.
Change-Id: I3e4d77ff3791528b1233467060d3ea83cb854acb
Reviewed-on: https://go-review.googlesource.com/27270
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Prior to this CL, cmd/go invoked cmd/asm once
for every assembly file.
The exec and cmd/asm startup overhead dwarfed
the actual time spent assembling.
This CL adds support to cmd/asm to process
multiple input files and uses it in cmd/go.
This cuts 10% off the wall time for 'go build -a math'.
Fixes#15680
Change-Id: I12d2ee2c817207954961dc8f37b8f2b09f835550
Reviewed-on: https://go-review.googlesource.com/27636
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The enumerations didn't include the syntactic form where the lhs is
full variable declaration with type specification, as in:
var x, ok T = ...
Fixes#15782.
Change-Id: I0f7bafc37dc9dcf62cdb0894a0d157074ccd4b3e
Reviewed-on: https://go-review.googlesource.com/27670
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Update goobj reader so it can provide all the information
necessary to disassemble .o (and .a) files.
Grab architecture of .o files from header.
.o files have relocations in them. This CL also contains a simple
mechanism to disassemble relocations and add relocation info as an extra
column in the output.
Fixes#13862
Change-Id: I608fd253ff1522ea47f18be650b38d528dae9054
Reviewed-on: https://go-review.googlesource.com/24818
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The net package sets a finalizer on *netFD. I looked through all the
uses of *netFD in the package, looking for each case where a *netFD
was passed as an argument and the final reference to the argument was
not a function or method call. I added a call to runtime.KeepAlive after
each such final reference (there were only three).
The code is safe today without the KeepAlive calls because the compiler
keeps arguments alive for the duration of the function. However, that is
not a language requirement, so adding the KeepAlive calls ensures that
this code remains safe even if the compiler changes in the future.
Change-Id: I4e2bd7c5a946035dc509ccefb4828f72335a9ee3
Reviewed-on: https://go-review.googlesource.com/27650
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The os package sets a finalizer on *Process. I looked through all the
uses of *Process in the package, looking for each case where a *Process
was passed as an argument and the final reference to the argument was
not a function or method call. I added a call to runtime.KeepAlive after
each such final reference (there were only three).
The code is safe today without the KeepAlive calls because the compiler
keeps arguments alive for the duration of the function. However, that is
not a language requirement, so adding the KeepAlive calls ensures that
this code remains safe even if the compiler changes in the future.
I also removed an existing unnecessry call to runtime.KeepAlive. The
syscall.Syscall function is handled specially by the compiler to keep
its arguments alive.
Change-Id: Ibd2ff20b31ed3de4f6a59dd1633c1b44001d91d9
Reviewed-on: https://go-review.googlesource.com/27637
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Now that we have ops that can return 2 results, have BSF return a result
and flags. We can then get rid of the redundant comparison and use CMOV
instead of CMOVconst ops.
Get rid of a bunch of the ops we don't use. Ctz{8,16}, plus all the Clzs,
and CMOVNEs. I don't think we'll ever use them, and they would be easy
to add back if needed.
Change-Id: I8858a1d017903474ea7e4002fc76a6a86e7bd487
Reviewed-on: https://go-review.googlesource.com/27630
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Blank struct fields are regular unexported fields. Two
blank fields are different if they are from different
packages. In order to correctly differentiate them, the
compiler needs the package information. Add it to the
export data.
Fixes#15514.
Change-Id: I421aaca22b542fcd0d66b2d2db777249cad78df6
Reviewed-on: https://go-review.googlesource.com/27639
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The only previous mention of this property was in the String() method.
Since this is the only way to uniquely identify a type and we can't
change this property without breaking the Go 1 guarantee, it seems
better to document this property than hiding it on a method.
Fixes#16348
Change-Id: I3d25f7d6e6007e3c15c2e13010869888d0181fc2
Reviewed-on: https://go-review.googlesource.com/27170
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Some FmtSharp export formatting flag support was removed with
commit b4e9f70. Don't panic if FmtSharp is set, just ignore it.
Fixes#16820.
Change-Id: Ie0c3d3774bd55002f6d2781b1212d070f083e6b2
Reviewed-on: https://go-review.googlesource.com/27556
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If a program wants to evaluate math.Sqrt for any constant value
(for example, math.Sqrt(3)), we can replace that expression with
its evaluation (1.7320508075688772) at compile time, instead of
generating a SQRT assembly command or equivalent.
Adds tests that math.Sqrt generates the correct values. I also
compiled a short program and verified that the Sqrt expression was
replaced by a constant value in the "after opt" step.
Adds a short doc to the top of generic.rules explaining what the file
does and how other files interact with it.
Fixes#15543.
Change-Id: I6b6e63ac61cec50763a09ba581024adeee03d4fa
Reviewed-on: https://go-review.googlesource.com/27457
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Tell msan that the arguments to the traceback functions are initialized,
in case the traceback functions are compiled with -fsanitize=memory.
Change-Id: I3ab0816604906c6cd7086245e6ae2e7fa62fe354
Reviewed-on: https://go-review.googlesource.com/24856
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The optional fractional seconds overrides any range error
from the second parsing. Instead don't look for optional fractional
seconds if a range error has occured.
Change-Id: I27e0a2432740f6753668bd8833e48b9495bc4036
Reviewed-on: https://go-review.googlesource.com/27590
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On some error when using io.Copy with TCPConn, it displays an error
correlation like the following:
read tcp 192.0.2.1:1111->192.0.2.2:2222: read tcp [2001:db8::2]:2222->[2001:db8::3]:3333 read: connection reset by peer
the correlation "some error on reading after reading operation" looks a
bit confusing because the operation on the ReadFrom method of TCPConn is
actually "writing after reading." To clarify and avoid confusion, this
change sets "readfrom" to the Op field of outer-most OpError instead of
"read."
Change-Id: I6bf4e2e7247143fa54bbcf9cef7a8ae1ede1b35c
Reviewed-on: https://go-review.googlesource.com/25220
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This permits people to use -buildmode=c-archive to produce an archive
file that can be included in a PIE or shared library.
Change-Id: Ie340ee2f08bcff4f6fd1415f7d96d51ee3a7c9a1
Reviewed-on: https://go-review.googlesource.com/24180
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Add missing race and msan checks to reflect.typedmmemove and
reflect.typedslicecopy. Missing these checks caused the race detector
to miss races and caused msan to issue false positive errors.
Fixes#16281.
Change-Id: I500b5f92bd68dc99dd5d6f297827fd5d2609e88b
Reviewed-on: https://go-review.googlesource.com/24760
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Keep flagInterpreter unchanged after flag parsing. This lets us replace
flagInterpreterSet with flagInterpreter != "".
Change-Id: Ifd2edbb2ce0011e97276ca18281b8ffbabde1c50
Reviewed-on: https://go-review.googlesource.com/27563
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Android timezones are in a packed format, different from the separate
files of a regular Unix system. This CL contain the necessary code to
parse the packed tzdata file and extract time zones from it. It also
adds a basic test to ensure the new parser works.
Fixes#13581
Change-Id: Idebe73726c3d4c2de89dd6ae1d7d19f975207500
Reviewed-on: https://go-review.googlesource.com/24494
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
os package and path/filepath package have duplicated code for
checking symlink supports in test code.
This CL tries to simplify such test code.
Change-Id: I0371488337f5e951eca699852daab9ccb16ddd62
Reviewed-on: https://go-review.googlesource.com/27331
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This sort is now only reachable for constant clauses
for a non-interface switch expression value.
Refactor a bit so that the few tests that remain
are concise and easy to read.
Add a test that string length takes priority
over built-in string order.
Change-Id: Iedaa11ff77049d5ad1bf14f54cbb8c3411d589a7
Reviewed-on: https://go-review.googlesource.com/26767
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is simpler than the sorting technique.
It also allows us to simplify or eliminate
some of the sorting decisions.
Most important, sorting will not work when case clauses
represent ranges of integers: There is no correct
sort order that allows overlap detection by comparing
neighbors. Using a map allows of a cheap, simple
approach to ranges, namely to insert every int
in the map. The equivalent approach for sorting
means juggling temporary Nodes for every int,
which is a lot more expensive.
Change-Id: I84df3cb805992a1b04d14e0e4b2334f943e0ce05
Reviewed-on: https://go-review.googlesource.com/26766
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The implementations are going to start diverging more.
Instead of more if clauses and empty parameters,
specialize.
Change-Id: I44584450592e8c9f72a10d8ada859c07e9d9aa19
Reviewed-on: https://go-review.googlesource.com/26764
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
We used to have separate kinds for the default
case and the nil type case. Now that those are
gone, we can use a simple bool instead.
Change-Id: I65488e945df68178e893cddd2e091ebb6e32ef4d
Reviewed-on: https://go-review.googlesource.com/26763
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is a bit simpler than playing sorting games,
and it is clearer that it generates errors
in the correct (source) order.
It also allows us to simplify sorting.
It also prevents quadratic error messages for
(pathological) inputs with many duplicate type cases.
While we’re here, refactoring deduping into separate functions.
Negligible compilebench impact.
Fixes#15912.
Change-Id: I6cc19edd38875389a70ccbdbdf0d9b7d5ac5946f
Reviewed-on: https://go-review.googlesource.com/26762
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
example for httptest.Recorder was inspecting Recoder directly.
Using Result() to convert Recorder into a http.Response yields a much
better user experience.
Closes#16837
Change-Id: Id0e636c12cd6adb1ba11f89953ff2b0f43758cf3
Reviewed-on: https://go-review.googlesource.com/27495
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
CL 27473 accidentally changed `!Debug['I']` to `*flagInterpreter != ""`.
Since the old `Debug['I']` was set when the new *flagInterpreter was
set, this inverted the sense of the condition. The effect was to always
ignore the cgo_dynamic_interpreter setting from runtime/cgo. This worked
OK when the default interpreter was the correct one, but failed when it
was not, as is currently the case on, at least, PPC64 and ARM.
This CL restores the old behavior by using a separate variable to track
whether the -I flag was used, just as we used to.
Change-Id: Icf9b65fa41349ed2e4de477fec0a557ef1eb8189
Reviewed-on: https://go-review.googlesource.com/27562
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
My flags change reversed the meaning of -s within mips64's
linker code. This should fix that.
Change-Id: Ia24002469e557fb29badfd830134e61c1dd7e16e
Reviewed-on: https://go-review.googlesource.com/27555
Reviewed-by: Minux Ma <minux@golang.org>
Replace ad-hoc encoding of export version info with a
more systematic approach.
Continue to read (but not write) the Go1.7 format for backward-
compatibility. This will avoid spurious errors with old installed
packages.
Fixes#16244.
Change-Id: I945e79ffd5e22b883250f6f9fac218370c2505a2
Reviewed-on: https://go-review.googlesource.com/27452
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The error return from copyValue was ignored causing some XML attribute
parsing to swallow an error.
Additionally, type MyMarshalerAttrTest had no UnmarshalXMLAttr method
causing marshalTests not to be symmetrical and the test suite to fail
for test case 101.
Fixes#16158
Change-Id: Icebc505295a2c656ca4b42ba37bb0957dd7260c6
Reviewed-on: https://go-review.googlesource.com/27455
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In StartTrace we emit EvGoCreate for all existing goroutines.
This includes stack unwind to obtain current stack.
Real Go programs can contain hundreds of thousands of blocked goroutines.
For such programs StartTrace can take up to a second (few ms per goroutine).
Obtain current stack ID once and use it for all EvGoCreate events.
This speeds up StartTrace with 10K blocked goroutines from 20ms to 4 ms
(win for StartTrace called from net/http/pprof hander will be bigger
as stack is deeper).
Change-Id: I9e5ff9468331a840f8fdcdd56c5018c2cfde61fc
Reviewed-on: https://go-review.googlesource.com/25573
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Fib with all int and float types run correctly.
*, /, shifts, Zero, Move not implemented yet. No optimization yet.
Updates #16359.
Change-Id: I4b0412954d5fd4c13a5fcddd8689ed8ac701d345
Reviewed-on: https://go-review.googlesource.com/27404
Reviewed-by: David Chase <drchase@google.com>
bytes.Compare has its go prototype in package bytes,
but its implementation in package runtime.
vet used to complain that the prototype was missing.
Now instead:
runtime/asm_amd64.s:1483: [amd64] cannot check cross-package assembly function: Compare is in package bytes
Updates #11041
Change-Id: Ied44fac10d0916d7a34e552c02d052e16fca0c8c
Reviewed-on: https://go-review.googlesource.com/27153
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The asmdecl check had hand-rolled code that
calculated the size and offset of parameters
based only on the AST.
It included a list of known named types.
This CL changes asmdecl to use go/types instead.
This allows us to easily handle named types.
It also adds support for structs, arrays,
and complex parameters.
It improves the default names given to unnamed
parameters. Previously, all anonymous arguments were
called "unnamed", and the first anonymous return
argument was called "ret".
Anonymous arguments are now called arg, arg1, arg2,
etc., depending on the index in the argument list.
Return arguments are ret, ret1, ret2.
This CL also fixes a bug in the printing of
composite data type sizes.
Updates #11041
Change-Id: I1085116a26fe6199480b680eff659eb9ab31769b
Reviewed-on: https://go-review.googlesource.com/27150
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This moves many of the flag globals into main and assigns them
to their flag.String/Int64/... directly.
Updates #16818
Change-Id: Ibbff44a273bbc5cb7228e43f147900ee8848517f
Reviewed-on: https://go-review.googlesource.com/27473
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Go 1.7 crashed after Transport.IdleConnTimeout if an HTTP/2 connection
was established but but its caller no longer wanted it. (Assuming the
connection cache was enabled, which it is by default)
Fixes#16208
Change-Id: I9628757f7669e344f416927c77f00ed3864839e3
Reviewed-on: https://go-review.googlesource.com/27450
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We will never inline recursive calls.
Rather than simulate the recursion until we hit
the complexity ceiling, just bail early.
Also, remove a pointless n.Op check.
visitBottomUp guarantees that n will be an
ODCLFUNC, and caninl double-checks it.
Change-Id: Ifa48331686b24289d34e68cf5bef385f464b6b92
Reviewed-on: https://go-review.googlesource.com/27462
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The obj library's flag functions are (mostly) light wrappers
around the standard library flag package. Use the flag package
directly where possible.
Most uses of the 'count'-type flags (except for -v) only check
against 0, so they can safely be replaced by bools. Only -v
and the flagfns haven't been replaced.
Debug has been turned into a slice of bools rather than ints.
There was a copy of the -v verbosity in ctxt.Debugvlog, so don't use
Debug['v'] and just use ctxt.Debugvlog.
Updates #16818
Change-Id: Icf6473a4823c9d35513bbd0c34ea02d5676d782a
Reviewed-on: https://go-review.googlesource.com/27471
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
cmd/link/link_test.go contains several multi-line
struct tags. Going through an unquote/quote cycle
converts `a
b
c` to "a\nb\nc\n".
This keeps all vet error messages for the standard
library on a single line.
Updates #11041
Change-Id: Ifba1e87297a5174294d1fbf73463fd3db357464f
Reviewed-on: https://go-review.googlesource.com/27129
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Eliminates the following false positive:
cmd/go/go_test.go:1916: possible formatting directive in Error call
The line in question:
tg.t.Error("some coverage results are 0.0%")
Updates #11041
Change-Id: I3b7611fa3e0245714a19bd5388f21e39944f5296
Reviewed-on: https://go-review.googlesource.com/27128
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
'-' is one of shell special parameters.
The existing implementation of isShellSpecialVar missed '-'
from the list, causing "$-" and "${-}" expand differently.
Fixes#16554
Change-Id: Iafc7984692cc83cff58f7c1e01267bf78b3a20a9
Reviewed-on: https://go-review.googlesource.com/25352
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change threads the *ld.Link Ctxt variable through
code in arch-specific packages. This removes all remaining
uses of Ctxt, so remove the global variable too.
This CL continues the work in golang.org/cl/27408
Updates #16818
Change-Id: I5f4536847a1825fd0b944824e8ae4e122ec0fb78
Reviewed-on: https://go-review.googlesource.com/27459
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Certain browsers (Chrome 53, Safari 9.1.2, Firefox 46) won't correctly
follow a directory listing's links if the file name begins with a run
of characters then a colon, e.g. "foo:bar". Probably mistaking it for
a URI. However, they are happy to follow "./foo:bar", so this change
prepends "./" to all link hrefs in the directory listing of
FileServer.
Change-Id: I60ee8e1ebac73cbd3a3ac0f23e80fdf52e3dc352
Reviewed-on: https://go-review.googlesource.com/27440
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Ctxt is a global defined in cmd/link/internal/ld of type *ld.Link.
Start threading a *ld.Link through function calls instead of
relying on the global variable.
Ctxt is still used as a global by the architecture-specific packages,
but I plan to fix that in a subsequent CL.
Change-Id: I77a3a58bd396fafd959fa1d8b1c83008a9f5a7fb
Reviewed-on: https://go-review.googlesource.com/27408
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
The code wasn't checking to see if the data was still >= 64 bytes
long after aligning it.
Aligning the data is an optimization and we don't actually need
to do it. In fact for smaller sizes it slows things down due to
the overhead of calling the generic function. Therefore for now
I have simply removed the alignment stage. I have also added a
check into the assembly to deliberately trigger a segmentation
fault if the data is too short.
Fixes#16779.
Change-Id: Ic01636d775efc5ec97689f050991cee04ce8fe73
Reviewed-on: https://go-review.googlesource.com/27409
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For persistent error handling, the methods of huffmanBitWriter have to be
consistent about how they check errors. It must either consistently
check error *before* every operation OR immediately *after* every
operation. Since most of the current logic uses the previous approach,
we apply the same style of error checking to writeBits and all calls
to Write such that they only operate if w.err is already nil going
into them.
The error handling approach is brittle and easily broken by future commits to
the code. In the near future, we should switch the logic to use panic at the
lowest levels and a recover at the edge of the public API to ensure
that errors are always persistent.
Fixes#16749
Change-Id: Ie1d83e4ed8842f6911a31e23311cd3cbf38abe8c
Reviewed-on: https://go-review.googlesource.com/27200
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Do not panic when we encounter nil interface values which are
invalid values for gob. Previously this wasn't caught yet
we were calling reflect.*.Type() on reflect.Invalid values
thereby causing panic:
`panic: reflect: call of reflect.Value.Type on zero Value.`
which is a panic not enforced by encoding/gob itself.
We can catch this and send back an error to the caller.
Fixes#16204
Change-Id: Ie646796db297759a74a02eee5267713adbe0c3a0
Reviewed-on: https://go-review.googlesource.com/24989
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
The previous fix for this, commit 336dad2a, had everything right in
the commit message, but reversed the test in the code. Fix the test in
the code.
This reversal effectively disabled the scavenger on large page systems
*except* in the rare cases where this code was originally wrong, which
is why it didn't obviously show up in testing.
Fixes#16644. Again. :(
Change-Id: I27cce4aea13de217197db4b628f17860f27ce83e
Reviewed-on: https://go-review.googlesource.com/27402
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When tracing is started in the middle of program execution,
we already have a number of runnable goroutines and a number
of blocked/in syscall goroutines. In order to reflect these
goroutines in the trace, we emit EvGoCreate for all existing
goroutines. Then for blocked/in syscall goroutines we additionally
emit EvGoWaiting/EvGoInSyscall events. These events don't reset g.ev
during trace analysis. So next EvGoStart finds g.ev set to the
previous EvGoCreate. As the result time between EvGoCreate and
EvGoStart is accounted as scheduler latency. While in reality
it is blocking/syscall time.
Properly reset g.ev for EvGoWaiting/EvGoInSyscall events.
Change-Id: I0615ba31ed7567600a0667ebb27458481da73adb
Reviewed-on: https://go-review.googlesource.com/25572
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
The transition from mark 1 to mark 2 no longer enqueues new root
marking jobs, but some of the comments still refer to this. Fix these
comments.
Change-Id: I3f98628dba32c5afe30495ab495da42b32291e9e
Reviewed-on: https://go-review.googlesource.com/24965
Reviewed-by: Rick Hudson <rlh@golang.org>
In other systems, putting a leaf certificate in the root store works to
express that exactly that certificate is acceptable. This change makes
that work in Go too.
Fixes#16763.
Change-Id: I5c0a8dbc47aa631b23dd49061fb217ed8b0c719c
Reviewed-on: https://go-review.googlesource.com/27393
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For some reason, ISO decided to duplicate the OID for RSA+SHA1. Most
pertinantly, the makecert.exe utility on Windows is known to have used
this OID.
This change makes the ISO OID an alias for the normal one.
Change-Id: I60b76265bf1721282bdb0d5c99c98d227c18a878
Reviewed-on: https://go-review.googlesource.com/27394
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes a bunch of changes to package syntax to tweak line numbers
for AST nodes. For example, short variable declaration statements are
now associated with the location of the ":=" token, and function calls
are associated with the location of the final ")" token. These help
satisfy many unit tests that assume the old parser's behavior.
Because many of these changes are questionable, they're guarded behind
a new "gcCompat" const to make them easy to identify and revisit in
the future.
A handful of remaining tests are too difficult to make behave
identically. These have been updated to execute with -newparser=0 and
comments explaining why they need to be fixed.
all.bash now passes with both the old and new parsers.
Change-Id: Iab834b71ca8698d39269f261eb5c92a0d55a3bf4
Reviewed-on: https://go-review.googlesource.com/27199
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Introduce a new noder type to transform package syntax's AST into gc's
Node tree. Hidden behind a new -newparser flag.
Change-Id: Id0e862ef6196c41533876afc4ec289e21d422d18
Reviewed-on: https://go-review.googlesource.com/27198
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
gc needs access to line offsets for Nodes. It also needs access to the
end line offset for function bodies so it knows what line number to
use for things like implicit returns and defer executions.
Lastly, include an extra bool to distinguish between simple and full
slice expressions. This is redundant in valid parse trees, but needed
by gc for producing complete warnings in invalid inputs.
Change-Id: I64baf334a35c72336d26fa6755c67eb9d6f4e93c
Reviewed-on: https://go-review.googlesource.com/27196
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Large shifts of constants are frequently
used for fancy 32/64 bit detection.
This removes 14 false positives from the
standard library.
Updates #11041
Change-Id: Ib39346e5c161da04c38a6a3067932ef43bf74f2d
Reviewed-on: https://go-review.googlesource.com/27155
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
If SetSessionTicketKeys was called on a fresh tls.Config, the configured
keys would be overridden with a random key by serverInit.
Fixes#15421.
Change-Id: I5d6cc81fc3e5de4dfa15eb614d102fb886150d1b
Reviewed-on: https://go-review.googlesource.com/27317
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
These were new with TLS 1.2 and, reportedly, some servers require it.
Since it's easy, this change adds suport for three flavours of
AES-128-CBC with SHA-256 MACs.
Other testdata/ files have to be updated because this changes the list
of cipher suites offered by default by the client.
Fixes#15487.
Change-Id: I1b14330c31eeda20185409a37072343552c3464f
Reviewed-on: https://go-review.googlesource.com/27315
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Syntax tree nodes, scanner, parser, basic printers.
Builds syntax trees for entire Go std lib at a rate of ~1.8M lines/s
in warmed up state (MacMini, 2.3 GHz Intel Core i7, 8GB RAM):
$ go test -run StdLib -fast
parsed 1074617 lines (2832 files) in 579.66364ms (1853863 lines/s)
allocated 282.212Mb (486.854Mb/s)
PASS
Change-Id: Ie26d9a7bf4e5ff07457aedfcc9b89f0eba72ae3f
Reviewed-on: https://go-review.googlesource.com/27195
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Only remove stores that is shadowed by another store with same or
larger size. Normally we don't need this check because we did check
the types, but unsafe pointer casting can get around it.
Fixes#16769.
Change-Id: I3f7c6c57807b590a2f735007dec6c65a4fa01a34
Reviewed-on: https://go-review.googlesource.com/27320
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This time with the cherry-pick from the proper patch of
the old CL.
Stack size increased.
Corrected NaN-comparison glitches.
Marked g register as clobbered by calls.
Fixed shared libraries.
live_ssa.go still disabled because of differences.
Presumably turning on more optimization will fix
both the stack size and the live_ssa.go glitches.
Enhanced debugging output for shared libs test.
Rebased onto master.
Updates #16010.
Change-Id: I40864faf1ef32c118fb141b7ef8e854498e6b2c4
Reviewed-on: https://go-review.googlesource.com/27159
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This is a copy of golang.org/cl/22092 by Ryan Brown.
Here's his original comment:
On my machine this increases the average time for 'go build cmd/go' from
2.25s to 2.36s. I tried to measure compile and link separately but saw
no significant change.
Change-Id: If0d2b756d52a0d30d4eda526929c82794d89dd7b
Reviewed-on: https://go-review.googlesource.com/25311
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
fmt treats interfaces as being transparent.
As a result, we cannot say with confidence
that any particular verb is wrong.
This fixes the following vet false positives
in the standard library:
database/sql/sql_test.go:210: arg dep for printf verb %p of wrong type: sql.finalCloser
fmt/fmt_test.go:1663: arg nil for printf verb %s of wrong type: untyped nil
go/ast/commentmap.go:328: arg node for printf verb %p of wrong type: ast.Node
net/http/transport_test.go:120: arg c for printf verb %p of wrong type: net.Conn
net/http/httptest/server.go:198: arg c for printf verb %p of wrong type: net.Conn
net/http/httputil/dump_test.go:258: arg body for printf verb %p of wrong type: io.Reader
reflect/set_test.go:81: arg x for printf verb %p of wrong type: io.Writer
reflect/set_test.go:141: arg bb for printf verb %p of wrong type: io.Reader
Updates #11041
Updates #16314
Change-Id: I76df01abb3c34a97b6960f551bed9c1c91377cfc
Reviewed-on: https://go-review.googlesource.com/27127
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Although the term “RSA” is almost synonymous with PKCS#1 v1.5, that
standard is quite flawed, cryptographically speaking. Bellare and
Rogaway fixed PKCS#1 v1.5 with OAEP (for encryption) and PSS (for
signatures) but they only see a fraction of the use of v1.5.
This change adds support for creating and verifying X.509 certificates
that use PSS signatures. Sadly, every possible dimension of flexibility
seems to have been reflected in the integration of X.509 and PSS
resulting in a huge amount of excess complexity. This change only
supports one “sane” configuration for each of SHA-{256, 384, 512}.
Hopefully this is sufficient because it saves a lot of complexity in the
code.
Although X.509 certificates with PSS signatures are rare, I'm inclined
to look favourably on them because they are sufficiently superior.
Fixes#15958.
Change-Id: I7282e0b68ad0177209f8b2add473b94aa5224c07
Reviewed-on: https://go-review.googlesource.com/24743
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The RFC is clear that the Parameters in an AlgorithmIdentifer for an RSA
public key must be NULL. BoringSSL enforces this so we have strong
evidence that this is a widely compatible change.
Embarrassingly enough, the major source of violations of this is us. Go
used to get this correct in only one of two places. This was only fixed
in 2013 (with 4874bc9b). That's why lots of test certificates are
updated in this change.
Fixes#16166.
Change-Id: Ib9a4551349354c66e730d44eb8cee4ec402ea8ab
Reviewed-on: https://go-review.googlesource.com/27312
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
subtle.ConstantTimeCompare now tests the length of the inputs (although
it didn't when this code was written) so this test in crypto/hmac is now
superfluous.
Fixes#16336.
Change-Id: Ic02d8537e776fa1dd5694d3af07a28c4d840d14b
Reviewed-on: https://go-review.googlesource.com/27239
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If the SerialNumber is nil in the template then the resulting panic is
rather deep in encoding/asn1 and it's not obvious what went wrong.
This change tests and returns a more helpful error in this case.
Fixes#16603.
Change-Id: Ib30d652555191eb78f705dff8d909e4b5808f9ca
Reviewed-on: https://go-review.googlesource.com/27238
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This commit improves the processing of the final few bytes in
castagnoliSSE42: instead of processing one byte at a time, we use all
versions of the CRC32 instruction to process 4 bytes, then 2, then 1.
The difference is only noticeable for small "odd" sized buffers.
We do the similar improvement for processing the first few bytes in
the case of unaligned buffer.
Fixing the test which was not actually verifying the results for
misaligned buffers (WriteString was creating an internal copy which
was aligned).
Adding benchmarks for length 15 (aligned and misaligned), results
below.
name old time/op new time/op delta
CastagnoliCrc15B-4 25.1ns ± 0% 22.1ns ± 1% -12.14%
CastagnoliCrc15BMisaligned-4 25.2ns ± 0% 22.9ns ± 1% -9.03%
CastagnoliCrc40B-4 23.1ns ± 0% 23.4ns ± 0% +1.08%
CastagnoliCrc1KB-4 127ns ± 0% 128ns ± 0% +1.18%
CastagnoliCrc4KB-4 462ns ± 0% 464ns ± 0% ~
CastagnoliCrc32KB-4 3.58µs ± 0% 3.60µs ± 0% +0.58%
name old speed new speed delta
CastagnoliCrc15B-4 597MB/s ± 0% 679MB/s ± 1% +13.77%
CastagnoliCrc15BMisaligned-4 596MB/s ± 0% 655MB/s ± 1% +9.94%
CastagnoliCrc40B-4 1.73GB/s ± 0% 1.71GB/s ± 0% -1.14%
CastagnoliCrc1KB-4 8.01GB/s ± 0% 7.93GB/s ± 1% -1.06%
CastagnoliCrc4KB-4 8.86GB/s ± 0% 8.83GB/s ± 0% ~
CastagnoliCrc32KB-4 9.14GB/s ± 0% 9.09GB/s ± 0% -0.58%
Change-Id: I499e37af2241d28e3e5d522bbab836c1a718430a
Reviewed-on: https://go-review.googlesource.com/24470
Reviewed-by: Keith Randall <khr@golang.org>
In CSE if a tuple generator is CSE'd to a different block, its
selectors are copied to the same block. In this case, also CES
the copied selectors.
Test copied from Keith's CL 27202.
Fixes#16741.
Change-Id: I2fc8b9513d430f10d6104275cfff5fb75d3ef3d9
Reviewed-on: https://go-review.googlesource.com/27236
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
If we cannot infer the asm arch from the filename
or the build tags, assume that it is the
current build arch. Assembly files with no
restrictions ought to be usable on all arches.
Updates #11041
Change-Id: I0ae807dbbd5fb67ca21d0157fe180237a074113a
Reviewed-on: https://go-review.googlesource.com/27151
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The unsafe.Pointer check allows adding to
and subtracting from uintptrs in order to do
arithmetic.
Some code needs to round uintptrs.
Allow &^ for that purpose.
Updates #11041
Change-Id: Ib90dd2954bb6c78427058271e13f2ce4c4af38fb
Reviewed-on: https://go-review.googlesource.com/27156
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
- Use machine instructions for uint64<->float conversions
- Do not enforce alignment on Zero/Move
ARM64 supports unaligned load/stores, but only aligned offset
or small offset can be encoded into instructions.
- Do combined loads
Change-Id: Iffca7dd0f13070b17b784861ce5a30af584680eb
Reviewed-on: https://go-review.googlesource.com/27086
Reviewed-by: David Chase <drchase@google.com>
The Width{int,ptr,reg} assignments are no longer necessary since
golang.org/cl/21623. The other arch's betypeinit functions were
cleaned up, but apparently this one was missed.
Change-Id: I1c7f074d7864a561659c1f98aef604f57f285fd0
Reviewed-on: https://go-review.googlesource.com/27272
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
BIND libresolv allows values from 0 to 15.
For invalid values and negative numbers, 0 is used.
For numbers greater than 15, 15 is used.
Fixes#15419
Change-Id: I1009bc119c3e87919bcb55a80a35532e9fc3ba52
Reviewed-on: https://go-review.googlesource.com/24901
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The Source provided by math/rand relies on an array of cooked
pseudo-random 63bit integers for seeding. The origin of these
numbers is undocumented.
Add a standalone program in math/rand folder that generates
the 63bit integer array as well as a 64bit version supporting
extension of the Source to 64bit pseudo-random number
generation while maintaining the current sequence in the
lower 63bit.
The code is largely based on the initial implementation of the
random number generator in the go repository by Ken Thompson
(revision 399).
Change-Id: Ib4192aea8127595027116a0f5a7be53f11dc110b
Reviewed-on: https://go-review.googlesource.com/22230
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
sysUnused (e.g., madvise MADV_FREE) is only sensible to call on
physical page boundaries, so scavengelist rounds in the bounds of the
region being released to the nearest physical page boundaries.
However, if the region is smaller than a physical page and neither the
start nor end fall on a boundary, then rounding the start up to a page
boundary and the end down to a page boundary will result in end < start.
Currently, we only give up on the region if start == end, so if we
encounter end < start, we'll call madvise with a negative length and
the madvise will fail.
Issue #16644 gives a concrete example of this:
start = 0x1285ac000
end = 0x1285ae000 (1 8K page)
This leads to the rounded values
start = 0x1285b0000
end = 0x1285a0000
which leads to len = -65536.
Fix this by giving up on the region if end <= start, not just if
end == start.
Fixes#16644.
Change-Id: I8300db492dbadc82ac1ad878318b36bcb7c39524
Reviewed-on: https://go-review.googlesource.com/27230
Reviewed-by: Keith Randall <khr@golang.org>
When T is a scalar, there are no runtime calls
required, which makes this a clear win.
encoding/binary:
WriteInts-8 958ns ± 3% 864ns ± 2% -9.80% (p=0.000 n=15+15)
This also considerably shrinks a core fmt
routine:
Before: "".(*pp).printArg t=1 size=3952 args=0x20 locals=0xf0
After: "".(*pp).printArg t=1 size=2624 args=0x20 locals=0x98
Unfortunately, I find it very hard to get stable
numbers out of the fmt benchmarks due to thermal scaling.
Change-Id: I1278006b030253bf8e48dc7631d18985cdaa143d
Reviewed-on: https://go-review.googlesource.com/26659
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
This removes some scaffolding introduced pre-1.7, introduced to
fix an export format bug, and to minimize conflicts with older
formats. The currently deployed and recognized format is "v1",
so don't worry about other versions. This is a step towards a
better scheme for internal export format versioning.
For #16244.
Change-Id: Ic7cf99dd2a24ad5484cc54aed44fa09332c2cf72
Reviewed-on: https://go-review.googlesource.com/27205
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
Removes the encoding of this bit which was ignored but left behind
for 1.7 to minimize pre-1.7 export format changes. See the issue
for more details.
Fixes#15772.
Change-Id: I46cd7a66ad4c6003b78c64295cf3bda503ebf2dd
Reviewed-on: https://go-review.googlesource.com/27201
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
s390x took up the last available chunk of int16 opcodes.
There are RISC-V and sparc64 ports in progress out of tree,
and there will likely be other architectures.
Reduce the opcode space to allow more architectures to
fit without increasing to int32.
This is the smallest power of two that accomodates all
existing architectures. All else being equal, smaller is
better--smaller numbers are easier to generate immediates
for and easier on the eyes when debugging.
Change-Id: I4d0824b28913892fbd0579d3f90bea34e44c8946
Reviewed-on: https://go-review.googlesource.com/24223
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
We should check whether there is a concurrent writer at the
start of every mapiternext, not just in mapaccessK (which is
only called during certain map growth situations).
Tests turned off by default because they are inherently flaky.
Fixes#16278
Change-Id: I8b72cab1b8c59d1923bec6fa3eabc932e4e91542
Reviewed-on: https://go-review.googlesource.com/24749
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Only need to zero-extend to 32 bits and we get the top
32 bits zeroed for free.
Only the WQ change actually generates different code.
The assembler did this optimization for us in the other two cases.
But we might as well do it during SSA so -S output more closely
matches the actual generated instructions.
Change-Id: I3e4ac50dc4da124014d4e31c86e9fc539d94f7fd
Reviewed-on: https://go-review.googlesource.com/23711
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This CL adds a safety mechanism
for changing the number of opcodes
available per architecture.
A subsequent CL will actually make the change.
Change-Id: I6332ed5514f2f153c54d11b7da0cc8a6be1c8066
Reviewed-on: https://go-review.googlesource.com/24222
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This only triggers a few places in the stdlib,
but it helps a lot when it does.
Before:
runtime.mapassign1 t=1 size=2400 args=0x20 locals=0xe0
After:
runtime.mapassign1 t=1 size=2352 args=0x20 locals=0xd8
name old time/op new time/op delta
MapPop100-8 19.8µs ±11% 18.4µs ± 9% -7.16% (p=0.000 n=20+19)
MapPop1000-8 367µs ±17% 335µs ±11% -8.63% (p=0.000 n=19+19)
MapPop10000-8 7.29ms ±15% 6.86ms ±12% -5.84% (p=0.020 n=20+20)
Change-Id: I9faf32f95a6ba6a6d5d0818eab32cc271e01d10a
Reviewed-on: https://go-review.googlesource.com/26666
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Might as well tell the runtime how large the map is going to be.
This avoids grow work and allocations while the map is being built.
Will wait for 1.8.
Fixes#15880Fixes#16279
Change-Id: I377e3e5ec1e2e76ea2a50cc00810adda20ad0e79
Reviewed-on: https://go-review.googlesource.com/23558
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This CL teaches SSA to recognize code of the form
// b is a boolean value, i is an int of some flavor
if b {
i = 1
} else {
i = 0
}
and use b's underlying 0/1 representation for i
instead of generating jumps.
Unfortunately, it does not work on the obvious code:
func bool2int(b bool) int {
if b {
return 1
}
return 0
}
This is left for future work.
Note that the existing phiopt optimizations also don't work for:
func neg(b bool) bool {
if b {
return false
}
return true
}
In the meantime, runtime authors and the like can use:
func bool2int(b bool) int {
var i int
if b {
i = 1
} else {
i = 0
}
return i
}
This compiles to:
"".bool2int t=1 size=16 args=0x10 locals=0x0
0x0000 00000 (x.go:25) TEXT "".bool2int(SB), $0-16
0x0000 00000 (x.go:25) FUNCDATA $0, gclocals·23e8278e2b69a3a75fa59b23c49ed6ad(SB)
0x0000 00000 (x.go:25) FUNCDATA $1, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
0x0000 00000 (x.go:32) MOVBLZX "".b+8(FP), AX
0x0005 00005 (x.go:32) MOVBQZX AL, AX
0x0008 00008 (x.go:32) MOVQ AX, "".~r1+16(FP)
0x000d 00013 (x.go:32) RET
The extraneous MOVBQZX is #15300.
This optimization also helps range and slice.
The compiler must protect against pointers pointing
to the end of a slice/string. It does this by increasing
a pointer by either 0 or 1 * elemsize, based on a condition.
This CL optimizes away a jump in that code.
This CL triggers 382 times while compiling the standard library.
Updating code to utilize this optimization is left for future CLs.
Updates #6011
Change-Id: Ia7c1185f8aa223c543f91a3cd6d4a2a09c691c70
Reviewed-on: https://go-review.googlesource.com/22711
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We already inlined
_, ok = e.(T)
_, ok = i.(E)
_, ok = e.(E)
The only ok-only variants not inlined are now
_, ok = i.(I)
_, ok = e.(I)
These call getitab, so are non-trivial.
Change-Id: Ie45fd8933ee179a679b92ce925079b94cff0ee12
Reviewed-on: https://go-review.googlesource.com/26658
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Now that assembler opcodes have their own type, they can have a true
stringer, rather than explicit calls to Aconv, which makes for nicer
format strings.
Change-Id: Ic77f5f8ac38b4e519dcaa08c93e7b732226f7bfe
Reviewed-on: https://go-review.googlesource.com/25045
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Give *recordingConn the correct WriteTo signature
to be an io.WriterTo. This makes vet happy.
It also means that it'll report errors,
which were previously being ignored.
Updates #11041
Change-Id: I13f171407d63f4b62427679bff362eb74faddca5
Reviewed-on: https://go-review.googlesource.com/27121
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
container/list/list_test.go:274: self-assignment of e1 to e1
container/list/list_test.go:274: self-assignment of e4 to e4
container/list/list_test.go:282: self-assignment of e1 to e1
container/list/list_test.go:286: self-assignment of e1 to e1
container/list/list_test.go:286: self-assignment of e4 to e4
Updates #11041
Change-Id: Ibd90cf6a924e93497908f437b814c3fc82937f4a
Reviewed-on: https://go-review.googlesource.com/27114
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 23393 introduces PAUTOHEAP, and access of PAUTOHEAP variable is
rewritten to indirection of a PAUTO variable. Mark this variable
non-nil, so this indirection does not introduce extra nil checks.
Change-Id: I31853eed5e60238b6c5bc0546e2e9ab340dcddd9
Reviewed-on: https://go-review.googlesource.com/26831
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We were generating format strings containing
a lone %. Vet legitimately complains:
cmd/compile/internal/gc/constFold_test.go:339: unrecognized printf verb ' '
The fix doesn't make for very readable code,
but it is simple and obviously correct.
Updates #11041
Change-Id: I90bd2d1d140887f5229752a279f7e46921472fbb
Reviewed-on: https://go-review.googlesource.com/27115
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is preliminary work to unifying them.
Aside from Syscall9, all are identical.
Syscall9 has a netbsd/openbsd variant
and a dragonfly/freebsd variant.
Updates #11041
Change-Id: Ia5ce95d5e9115d4c0492d5e53aa7a4316deafd1f
Reviewed-on: https://go-review.googlesource.com/25115
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is preliminary work to unifying the
unix amd64 assembly implementations,
which is preliminary work to making the
assembly vet-friendly.
Updates #11041
Change-Id: Ic64985124f8fb86cc08898be2ec7fca972ced4ca
Reviewed-on: https://go-review.googlesource.com/25113
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If the server failed on us before we even tried to write any bytes,
it's safe to retry the request on a new connection, regardless of the
HTTP method/idempotence.
Fixes#15723
Change-Id: I25360f82aac530d12d2b3eef02c43ced86e62906
Reviewed-on: https://go-review.googlesource.com/27117
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Let the kernel pick a port for testing, and have the server in the
child process tell the parent (benchmarking) process the port that
was selected.
Fixes flakes like seen in https://golang.org/cl/27050 (and previously)
Change-Id: Ia2b705dc4152f70e0a5725015bdae09984d09d53
Reviewed-on: https://go-review.googlesource.com/27051
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Methods of FileSet are documented to be safe for concurrent use by
multiple goroutines, so FileSet is protected by a mutex and all its
methods use it to prevent concurrent mutations. All methods of File that
mutate the respective FileSet, including AddLine, do also lock its
mutex, but that does not help when PositionFor is invoked concurrently
and reads without synchronization what AddLine mutates.
The change adds acquiring a RLock around the racy call of File.position
and the respective test.
Fixes#16548
Change-Id: Iecaaa02630b2532cb29ab555376633ee862315dd
Reviewed-on: https://go-review.googlesource.com/25345
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
`bytes` and `strings` are pretty similar to each other, this commit
brings `strings` examples to its counter-part.
Partially addresses #16360
Change-Id: I551320eaa78be9df69012035f1c3333f500e04c9
Reviewed-on: https://go-review.googlesource.com/25062
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The heap.Fix function calls both down and up. If the element is moved
down, we don't need to call up and we could save a comparison.
(per suggestion by Radu Berinde)
Fixes#16098.
Change-Id: I83a74710e66cf0d274d8c0743338c26f89f31afe
Reviewed-on: https://go-review.googlesource.com/24273
Reviewed-by: Robert Griesemer <gri@golang.org>
When dynamically linking, a type symbol's name is replaced with a name based on
the SHA1 of the name as type symbol's names can be very long. However, this
can make a type's symbol name longer in some cases. So skip it in that case.
One of the symbols this changes the treatment of is 'type.string' and that fixes a
bug where -X doesn't work when dynamically linking.
Fixes#16671
Change-Id: If5269038261b76fb0ec52e25a9c1d64129631e3c
Reviewed-on: https://go-review.googlesource.com/26890
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
We already had special cases for 0 and 1. Add 2 and 3 for now too.
To be removed if the compiler is improved later (#6714).
This halves the number of allocations and total bytes allocated via
common filepath.Join calls, improving filepath.Walk performance.
Noticed as part of investigating filepath.Walk in #16399.
Change-Id: If7b1bb85606d4720f3ebdf8de7b1e12ad165079d
Reviewed-on: https://go-review.googlesource.com/25005
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
autopkg == localpkg, so it appears to be a remnant of earlier code.
Change-Id: I65b6c074535e877317cbf9f1f35e94890f0ebf14
Reviewed-on: https://go-review.googlesource.com/26662
Reviewed-by: Keith Randall <khr@golang.org>
1) Removed mark field from declInfo struct. Instead use a visited map
in ordering.go which was the only use place for the mark field.
2) Introduced objSet type for the common map[Object]bool type.
3) Improved comments.
Change-Id: I7544e7458d844b0ca08193f11de6238d317eaf2d
Reviewed-on: https://go-review.googlesource.com/24153
Reviewed-by: Alan Donovan <adonovan@google.com>
The old algorithm operated on a dependency graph that included
all objects (including functions) for simplicity: it was based
directly on the dependencies collected for each object during
type checking an object's initialization expression. It also
used that graph to compute the objects involved in an erroneous
initialization cycle.
Cycles that consist only of (mutually recursive) functions are
permitted in initialization code; so those cycles were silently
ignored if encountered. However, such cycles still inflated the
number of dependencies a variable might have (due to the cycle),
which in some cases lead to the wrong variable being scheduled
for initialization before the one with the inflated dependency
count.
Correcting for the cycle when it is found is too late since at
that point another variable may have already been scheduled.
The new algorithm computes the initialization dependency graph as
before but adds an extra pass during which functions are eliminated
from the graph (and their dependencies are "back-propagated").
This eliminates the problem of cycles only involving functions
(there are no functions).
When a cycle is found, the new code computes the cycle path from
the original object dependencies so it can still include functions
on the path as before, for the same detailed error message.
The new code also more clearly distinguishes between objects that
can be in the dependency graph (constants, variables, functions),
and objects that cannot, by introducing the dependency type, a new
subtype of Object. As a consequence, the dependency graph is smaller.
Fixes#10709.
Change-Id: Ib58d6ea65cfb279041a0286a2c8e865f11d244eb
Reviewed-on: https://go-review.googlesource.com/24131
Reviewed-by: Alan Donovan <adonovan@google.com>
The Darwin-only restriction was because we were late in the Go 1.7
cycle when the test was added.
In the process, I noticed Gettimeofday wasn't in the "unimplemented
midden heap" section of syscall_nacl.go, despite this line in the
original go1.txt:
pkg syscall, func Gettimeofday(*Timeval) error
So, add it, returning ENOSYS like the others.
Change-Id: Id7e02e857b753f8d079bee335c22368734e92254
Reviewed-on: https://go-review.googlesource.com/26772
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Quentin Smith <quentin@golang.org>
Code movement only.
If someone finds function 'foo' in "foo_linux.go",
they will expect that the Window version of 'foo' exists in "foo_windows.go".
Current code doesn't follow this manner.
For example, 'sameFile' exists in "file_unix.go",
"stat_plan9.go" and "types_windows.go".
The CL address that problem by following rules:
* readdir family => dir.go, dir_$GOOS.go
* stat family => stat.go, stat_$GOOS.go
* path-functions => path_$GOOS.go
* sameFile => types.go, types_$GOOS.go
* process-functions => exec.go, exec_$GOOS.go
* hostname => sys.go, sys_$GOOS.go
Change-Id: Ic3c64663ce0b2a364d7a414351cd3c772e70187b
Reviewed-on: https://go-review.googlesource.com/27035
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Merging from dev.ssa back into master.
Contains complete SSA backends for arm, arm64, 386, amd64p32.
Work in progress for PPC64.
Change-Id: Ifd7075e3ec6f88f776e29f8c7fd55830328897fd
The Go HTTP/1 client will make as many new TCP connections as the user requests.
The HTTP/2 client tried to have that behavior, but the policy of
whether a connection is re-usable didn't take into account the extra 1
stream counting against SETTINGS_MAX_CONCURRENT_STREAMS so in practice
users were getting errors.
For example, if the server's advertised max concurrent streams is 100
and 200 concurrrent Go HTTP requests ask for a connection at once, all
200 will think they can reuse that TCP connection, but then 100 will
fail later when the number of concurrent streams exceeds 100.
Instead, recognize the "no cached connections" error value in the
shouldRetryRequest method, so those 100 will retry a new connection.
This is the conservative fix for Go 1.7 so users don't get errors, and
to match the HTTP/1 behavior. Issues #13957 and #13774 are the more
involved bugs for Go 1.8.
Updates #16582
Updates #13957
Change-Id: I1f15a7ce60c07a4baebca87675836d6fe03993e8
Reviewed-on: https://go-review.googlesource.com/25580
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
@@ -5,39 +5,37 @@ reliable, and efficient software.
For documentation about how to install and use Go,
visit https://golang.org/ or load doc/install-source.html
in your web browser.
Our canonical Git repository is located at https://go.googlesource.com/go.
There is a mirror of the repository at https://github.com/golang/go.
Unless otherwise noted, the Go source files are distributed under the
BSD-style license found in the LICENSE file.
### Download and Install
#### Binary Distributions
Official binary distributions are available at https://golang.org/dl/.
After downloading a binary release, visit https://golang.org/doc/install
or load doc/install.html in your web browser for installation
instructions.
#### Install From Source
If a binary distribution is not available for your combination of
operating system and architecture, visit
https://golang.org/doc/install/source or load doc/install-source.html
in your web browser for source installation instructions.
### Contributing
Go is the work of hundreds of contributors. We appreciate your help!
To contribute, please read the contribution guidelines:
https://golang.org/doc/contribute.html
##### Note that we do not accept pull requests and that we use the issue tracker for bug reports and proposals only. Please ask questions on https://forum.golangbridge.org or https://groups.google.com/forum/#!forum/golang-nuts.
Unless otherwise noted, the Go source files are distributed
under the BSD-style license found in the LICENSE file.
--
## Binary Distribution Notes
If you have just untarred a binary Go distribution, you need to set
the environment variable $GOROOT to the full path of the go
directory (the one containing this file). You can omit the
variable if you unpack it into /usr/local/go, or if you rebuild
from sources by running all.bash (see doc/install-source.html).
You should also add the Go binary directory $GOROOT/bin
to your shell's path.
For example, if you extracted the tar file into $HOME/go, you might
put the following in your .profile:
export GOROOT=$HOME/go
export PATH=$PATH:$GOROOT/bin
See https://golang.org/doc/install or doc/install.html for more details.
Note that the Go project does not use GitHub pull requests, and that
we use the issue tracker for bug reports and proposals only. See
https://golang.org/wiki/Questions for a list of places to ask
That <code>struct hchan<*testing.T></code> is the runtime-internal representation of a channel. It is currently empty, or gdb would have pretty-printed it's contents.
That <code>struct hchan<*testing.T></code> is the
runtime-internal representation of a channel. It is currently empty,
distributions</a> are available for the FreeBSD (release 8-STABLE and above),
Linux, Mac OS X (10.7 and above), and Windows operating systems and
Linux, Mac OS X (10.8 and above), and Windows operating systems and
the 32-bit (<code>386</code>) and 64-bit (<code>amd64</code>) x86 processor
architectures.
</p>
@@ -47,14 +47,14 @@ If your OS or architecture is not on the list, you may be able to
<thalign="center">Notes</th>
</tr>
<tr><tdcolspan="3"><hr></td></tr>
<tr><td>FreeBSD 8-STABLE or later</td><td>amd64</td><td>Debian GNU/kFreeBSD not supported</td></tr>
<tr><td>Linux 2.6.23 or later with glibc</td><td>amd64, 386, arm</td><td>CentOS/RHEL 5.x not supported</td></tr>
<tr><td>Mac OS X 10.7 or later</td><td>amd64</td><td>use the clang or gcc<sup>†</sup> that comes with Xcode<sup>‡</sup></td></tr>
<tr><td>FreeBSD 8-STABLE or later</td><td>amd64, 386</td><td>Debian GNU/kFreeBSD not supported</td></tr>
<tr><td>Linux 2.6.23 or later with glibc</td><td>amd64, 386, arm, s390x, ppc64le</td><td>CentOS/RHEL 5.x not supported</td></tr>
<tr><td>Mac OS X 10.8 or later</td><td>amd64</td><td>use the clang or gcc<sup>†</sup> that comes with Xcode<sup>‡</sup> for <code>cgo</code> support</td></tr>
<tr><td>Windows XP or later</td><td>amd64, 386</td><td>use MinGW gcc<sup>†</sup>. No need for cygwin or msys.</td></tr>
</table>
<p>
<sup>†</sup><code>gcc</code> is required only if you plan to use
<sup>†</sup>A C compiler is required only if you plan to use
<ahref="/cmd/cgo">cgo</a>.<br/>
<sup>‡</sup>You only need to install the command line tools for
<ahref="http://developer.apple.com/Xcode/">Xcode</a>. If you have already
@@ -117,12 +117,12 @@ to point to the directory in which it was installed.
</p>
<p>
For example, if you installed Go to your home directory you should add the
following commands to <code>$HOME/.profile</code>:
For example, if you installed Go to your home directory you should add
commands like the following to <code>$HOME/.profile</code>:
</p>
<pre>
export GOROOT=$HOME/go
export GOROOT=$HOME/go1.X
export PATH=$PATH:$GOROOT/bin
</pre>
@@ -219,37 +219,16 @@ and building a simple program, as follows.
</p>
<p>
Create a directory to contain your <ahref="code.html#Workspaces">workspace</a>,
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
