'go mod download' calls WriteGoMod once via modload.ListModules when
it loads the build list. This saves sums for go.mod files needed by
MVS, but the write occurs before any zip files are downloaded.
With this change, 'go mod download' calls WriteGoMod again (and thus,
modfetch.WriteGoSum) after downloading and verifying module zip files,
so the sums of the zip files will be saved, too.
Fixes#41341
Change-Id: I7d56754aa255256ed45fd93cb154c2e6ea5f45a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/254357
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
On darwin, we put read-only data in __TEXT segment on AMD64 in
exe (non-PIE) buildmode, and in __DATA on everywhere else. This
is not ideal: things in __DATA segment are not read-only, and
being mapped R/W may use more run-time resources.
In fact, newer darwin systems support a __DATA_CONST segment,
which the dynamic linker will map it read-only after applying
relocations. Use that.
Fixes#38830.
Change-Id: Ic281e6c6ca8ef5fec4bb7c5b71c50dd5393e78ae
Reviewed-on: https://go-review.googlesource.com/c/go/+/253919
Reviewed-by: Than McIntosh <thanm@google.com>
When -mod=readonly is set, Import will now allow imports from
replacements without explicit requirements. With -mod=mod, this would
add a new requirement but does not trigger a module lookup, so it's
determinisitic.
Before reporting an error for an unknown import with -mod=readonly,
check whether the import is valid. If there's a typo in the import,
that's more relevant.
For #40728
Change-Id: I05e138ff76ba3d0eb2e3010c15589fa363deb8d3
Reviewed-on: https://go-review.googlesource.com/c/go/+/253745
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Keep track of whether the -mod flag was set explicitly. When
-mod=readonly is the default, we'll want to adjust our error messages
if it's set explicitly.
Also, register the -mod, -modcacherw, and -modfile flags in functions
in internal/base instead of internal/work. 'go mod' commands that
don't load packages shouldn't depend on internal/work.
For #40728
Change-Id: I272aea9e19908ba37e151baac4ea8630e90f241f
Reviewed-on: https://go-review.googlesource.com/c/go/+/253744
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
In the deadcode pass, a type symbol may be marked twice, one
without UsedInIface, one with. For the second time, don't
update the Reachparent graph, so it only records the path of
the first time the symbol is reached. This ensures the
Reachparent graph is acyclic.
TODO: add a test. (This only affects GOEXPERIMENT=fieldtrack)
Change-Id: I68e8a1a69c3830bc8aee5df946151dc22dcb2b29
Reviewed-on: https://go-review.googlesource.com/c/go/+/254297
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
BenchmarkFullASCIIRune tests the performance of function utf8.FullRune,
which will be inlined in BenchmarkFullASCIIRune. Since the return value
of FullRune is not referenced, it will be removed as dead code.
This CL makes the FullRune functions return value referenced by a global
variable to avoid this point. In addition, this CL adds one more benchmark
to cover more code paths, and puts them together as sub benchmarks of
BenchmarkFullRune.
Change-Id: I6e79f4c087adf70e351498a4b58d7482dcd1ec4a
Reviewed-on: https://go-review.googlesource.com/c/go/+/233979
Run-TryBot: eric fang <eric.fang@arm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Enable VBSL, VBIT, VCMTST, VUXTL VUXTL2 and FMOVQ SIMD
instructions required by the issue #40725. And FMOVQ
instrucion is used to move a large constant to a Vn
register.
Add test cases.
Fixes#40725
Change-Id: I1cac1922a0a0165d698a4b73a41f7a5f0a0ad549
Reviewed-on: https://go-review.googlesource.com/c/go/+/249758
Reviewed-by: Cherry Zhang <cherryyz@google.com>
I found the control flow of this function a bit tricky to reason about
due to nesting and interaction between conditions and iteration. This
change factors out a helper function that can return early instead of
mixing conditionals and 'continue' statements.
Also remove the (unused) ModuleUsedDirectly function.
For #36460
Change-Id: I60a2a5a1b32989e5a17a14e1a8c858b280cda8f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/251998
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
With lazy loading, the “build list” can be refined as packages are loaded.
Rename functions that return the build list to more precisely describe
the set of modules returned by the call.
Also eliminate a redundant call to LoadBuildList (right before
ListModules, which itself begins with the same call).
For #36460
Change-Id: I0fc4f9dd7602e0df5e166e329ee5d516d810ca53
Reviewed-on: https://go-review.googlesource.com/c/go/+/249878
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
The new semantics of the "all" package pattern can be implemented
without actually changing module loading per se. This change
implements those semantics, so that the change can be decoupled from
the changes to the module requirement graph.
For #36460
Change-Id: I0ee8b17afa8b728dc470a42a540fcc01764a4442
Reviewed-on: https://go-review.googlesource.com/c/go/+/240623
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Due to a bug in CL 173017, if QueryPackages found multiple candidates
for the given package and *at least* one of those candidates was not
available to add, we would reject *all* such candidates — even those
that were still viable.
Now, we return the first viable candidate, and only return an error if
*no* candidate is viable given the current build list.
Fixes#41113
Change-Id: Idb2e77244be7c0f5dd511efb142c3059925d7336
Reviewed-on: https://go-review.googlesource.com/c/go/+/251446
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Fix a data race for clients that mutate requests after receiving a
response error which is caused by the writeLoop goroutine left
running, this can be seen on cancelled requests.
Fixes#37669
Change-Id: Ia4743c6b8abde3a7503de362cc6a3782e19e7f60
Reviewed-on: https://go-review.googlesource.com/c/go/+/251858
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
modload.Import previously performed two otherwise-separable tasks:
1. Identify which module in the build list contains the requested
package.
2. If no such module exists, search available modules to try to find
the missing package.
This change splits those two tasks into two separate unexported
functions, and reports import-resolution errors by attaching them to
the package rather than emitting them directly to stderr. That allows
'list' to report the errors, but 'list -e' to ignore them.
With the two tasks now separate, it will be easier to avoid the
overhead of resolving missing packages during lazy loading if we
discover that some existing dependency needs to be promoted to the top
level (potentially altering the main module's selected versions, and
thus suppling packages that were previously missing).
For #36460
Updates #26909
Change-Id: I32bd853b266d7cd231d1f45f92b0650d95c4bcbd
Reviewed-on: https://go-review.googlesource.com/c/go/+/251445
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
forceStdVendor was a special-case mechanism to allow Go contributors
to use vendored dependencies by default when working in GOROOT/src.
As of Go 1.14,¹ the 'go' command uses vendored dependencies by default
within all modules, so the 'std' and 'cmd' modules no longer need to
be special cases, and we can remove this special-case code.
¹ https://golang.org/doc/go1.14#vendor
Updates #33848
Updates #30241
Change-Id: Ib2fb5841c253113b17fa86a086ce85a22ac3d121
Reviewed-on: https://go-review.googlesource.com/c/go/+/251159
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
If the user requests the 'all' pattern in addition to explicit roots
outside of 'all', we should not load the transitive dependencies of
those explicit roots as if they were *in* 'all'. Without the '-test'
flag, we should not load test dependencies of any package outside of
'all'. Even *with* the '-test' flag, we should only load test
dependencies of the requested roots, not test dependencies of other
packages that happen to be imported by those roots.
More precise tracking of membership in 'all' will be important when we
implement lazy loading, because membership in 'all' determines which
module dependencies we will record in the main module's go.mod file.
This change also reduces reliance on global state, factors out the
loading process into several smaller functions, and sets us up to
reuse the 'go mod vendor' version of the 'all' pattern for lazy
loading.
For #36460Fixes#40799
Change-Id: I5ca21c86a860daee1316f732cea131a331d8ddf9
Reviewed-on: https://go-review.googlesource.com/c/go/+/240505
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
This avoids a deadlock on prof.signalLock between setcpuprofilerate
and cpuprof.add if a SIGPROF is delivered to the thread between the
call to setThreadCPUProfiler and acquiring prof.signalLock.
Fixes#41014
Change-Id: Ie825e8594f93a19fb1a6320ed640f4e631553596
Reviewed-on: https://go-review.googlesource.com/c/go/+/253758
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Both ReadMemStatsSlow and CheckScavengedBits iterate over the page
allocator's chunks but don't actually check if they exist. During the
development process the chunks index became sparse, so now this was a
possibility. If the runtime tests' heap is sparse we might end up
segfaulting in either one of these functions, though this will generally
be very rare.
The pattern here to return nil for a nonexistent chunk is also useful
elsewhere, so this change introduces tryChunkOf which won't throw, but
might return nil. It also updates the documentation of chunkOf.
Fixes#41296.
Change-Id: Id5ae0ca3234480de1724fdf2e3677eeedcf76fa0
Reviewed-on: https://go-review.googlesource.com/c/go/+/253777
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Pre-resolve package index references, so it doesn't need to do a
map lookup in every cross-package symbol reference resolution. It
increases the memory usage very slightly (O(# imported packages)).
Change-Id: Ia76c97ac51f1c2c2d5ea7ae34853850ec69ef0a8
Reviewed-on: https://go-review.googlesource.com/c/go/+/253604
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This preserves zip sums when 'go get' is run on a module that does not
have a package in the root directory. The zip must be fetched to
determine whether the package should be loaded, so we already load and
verify the sum.
Note that 'go mod tidy' may still remove these sums, since they
aren't needed to load packages.
Fixes#41103
Change-Id: I78f10a25f0392461fdc98518a7c92a38ee3233c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/251880
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Currently, the statement:
go g(uintptr(f()))
gets rewritten into:
tmp := f()
newproc(8, g, uintptr(tmp))
runtime.KeepAlive(tmp)
which doesn't guarantee that tmp is still alive by time the g call is
scheduled to run.
This CL fixes the issue, by wrapping g call in a closure:
go func(p unsafe.Pointer) {
g(uintptr(p))
}(f())
then this will be rewritten into:
tmp := f()
go func(p unsafe.Pointer) {
g(uintptr(p))
runtime.KeepAlive(p)
}(tmp)
runtime.KeepAlive(tmp) // superfluous, but harmless
So the unsafe.Pointer p will be kept alive at the time g call runs.
Updates #24491
Change-Id: Ic10821251cbb1b0073daec92b82a866c6ebaf567
Reviewed-on: https://go-review.googlesource.com/c/go/+/253457
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It appears the machoCalcStart function is meant to align the
segment, but it doesn't. Replace it with an actual alignment
calculation. Also, use the alignment from the configuration,
instead of hardcode.
With this fix we could enable DWARF combining on macOS ARM64.
Change-Id: I19ec771b77d752b83a54c53b6ee65af78a31b8ae
Reviewed-on: https://go-review.googlesource.com/c/go/+/253558
Reviewed-by: Than McIntosh <thanm@google.com>
In Mach-O DWARF combining, some code was written using reflection,
so it could support both 32-bit and 64-bit Mach-O files without
duplicating code. We no longer support 32-bit darwin platforms
now. 32-bit support can go. Rewrite it with direct field access,
for 64-bit only.
Change-Id: If1338c3cd37cecf603f4df0c6eb0c890eaebfe5f
Reviewed-on: https://go-review.googlesource.com/c/go/+/253557
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
On darwin, with external linking, the system linker produces STAB
(symbolic debugging) symbols in the binary's symbol table. These
include paths of the intermediate object files, like
<tmpdir>/go.o, which changes from run to run, making the build
non-reproducible.
Since we run dsymutil to produce debug info and combine them
back into the binary, we don't need those STAB symbols anymore.
Strip them after running dsymutil.
If DWARF is not enabled, we don't run dsymutil. We can pass
"-Wl,-S" to let the system linker not generate those symbols.
While here, also make it more consistent about DWARF combining.
Currently we only do DWARF combining on macOS/AMD64, when DWARF
is enabled. On ARM64, we run dsymutil, but then throw the result
away. This CL changes it to not run dsymutil (and strip) on
ARM64.
TODO: add a test. We don't do it here as it fails on some
(non-darwin) platforms.
Fixes#40979.
Change-Id: If770f7828cdb858857d6079e0585bf067f8f7a92
Reviewed-on: https://go-review.googlesource.com/c/go/+/250944
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The post-index offset of VLD[1-4]R instructions is decided by the
"size" field not "Q" field, the current assembler uses "Q" fileld
to check the correctness of post-index offset which is not correct.
This patch fixes it.
Fixes#40725
Change-Id: If1cde7f21c6b3ee0e491649eb567700bd1475c84
Reviewed-on: https://go-review.googlesource.com/c/go/+/249757
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The Value field of ast.BasicLit is a string field holding the literal
string. For CHARs and STRINGs, the BasicLit.Value literal includes
quotes, so to use the value in practise one will often need to Unquote
it.
Since this is a common gotcha (I've been bitten by this a few times),
document it, and suggest the use of the strconv.Unquote functions.
Fixes#39590
Change-Id: Ie3e13f5a2a71bb1b59e03bc5b3a16d8e2e7c01d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/244960
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
On Server.Shutdown, all idle connections are closed.
A caveat for new connections is that they are marked idle
after 5 seconds.
Previously new HTTP/2 connections were marked New, and after 5 seconds,
they would then become idle. With this change, we now mark HTTP/2
connections as Active to allow the proper shutdown sequence to occur.
Fixes#36946Fixes#39776
Change-Id: I31efbf64b9a2850ca544da797f86d7e1b3378e8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/240278
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates x/net/http2 to git rev 62affa334b73ec65ed44a326519ac12c421905e3
x/net/http2: reject HTTP/2 Content-Length headers containing a sign
https://go-review.googlesource.com/c/net/+/236098/ (fixes#39017)
also updates the vendored version of golang.org/x/net by running
go get golang.org/x/net@62affa334b73ec65ed44a326519ac12c421905e3
go mod tidy
go mod vendor
go generate -run bundle net/http
Change-Id: I7ecfdb7644574c44c3616e3b47664eefd4c926f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/253238
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Ensures that calling TempDir() in either of Cleanup or Benchmark
doesn't cause test failures which were previously caused by the
created directory having been deleted after the first run, yet
we prevented the recreation of the directory due to our selection
of concurrency primitive sync.Once. This change recreates the
temporary directory if it doesn't exist, regardless of how
many times Cleanup and Benchmark are invoked.
Fixes#41062
Change-Id: I925d9f7207d7c369a193d1e17da7a59a586244a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/251297
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The linker assumed macOS is AMD64 (and 386 in the past). It
passes darwin/amd64-specific flags to the external linker when
building for macOS. They don't work for ARM64-based macOS. So
only pass them on AMD64.
Disable DWARF combining for macOS ARM64 for now. The generated
binary doesn't run. (TODO: fix.)
For macOS ARM64 port. External linking now works.
Change-Id: Iab53bc48f4fadd9b91de8898b4b450ea442667a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/253019
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The current implementation stores the comparison pseudo-ops of arm64
conditional instructions (CSEL/CSEL0) in Aux, this patch modifies it
and stores it in AuxInt, which can avoid the allocation.
Change-Id: I0b69e51f63acd84c6878c6a59ccf6417501a8cfc
Reviewed-on: https://go-review.googlesource.com/c/go/+/252517
Run-TryBot: fannie zhang <Fannie.Zhang@arm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This defines a macro for the regabi GOEXPERIMENT when assembling
runtime assembly code.
In general, assembly code will be shielded from the calling convention
change, but there is a small amount of runtime assembly that is going
to have to change. By defining a macro, we can easily make the small
necessary changes. The other option is to use build tags, but that
would require duplicating nontrivial amounts of unaffected code,
leading to potential divergence issues. (And unlike Go code, assembly
code can't depend on the compiler optimizing away branches on a
feature constant.) We consider the macro preferable, especially since
this is expected to be temporary as we transition to the new calling
convention.
Updates #40724.
Change-Id: I73984065123968337ec10b47bb12c4a1cbc07dc5
Reviewed-on: https://go-review.googlesource.com/c/go/+/252258
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This is the "feature flag" for the register calling convention work
(though since this work is expected to extend over a few releases,
it's not version-prefixed). This will let us develop the register
calling convention on the main branch while maintaining an easy toggle
between the old and new ABIs.
Updates #40724.
Change-Id: I129c8d87d34e6fa0910b6fa43efb35b706021637
Reviewed-on: https://go-review.googlesource.com/c/go/+/252257
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The primary responsibility of declare() to associate a symbol (Sym) with
a declaration (Node), so "oldname" will work. Function literals are
anonymous, so their symbols does not need to be declared.
Passes toolstash-check.
Change-Id: I739b1054e3953e85fbd74a99148b9cfd7e5a57eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/249078
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
They are skipped while processing Func.Dcl anyway.
This CL does not pass toolstash-check, because it reduces the length
of Func.Dcl length, while that length is used to generate autotmp
variables name.
Change-Id: I408183e62ce6c34e5f04c89814ebb9570957e37b
Reviewed-on: https://go-review.googlesource.com/c/go/+/252418
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fixes the file server to reject requests of the form:
"Range": "bytes=--N"
where "-N" is a negative suffix-length as designated by the
grammar in RFC 7233 Section 2.1, "Byte-Ranges", which specifies
that suffix-length MUST be of the form 1*DIGIT aka a non-negative digit.
Thus requests such as:
"Range": "bytes=--2"
will be rejected with a "416 Range Not Satisfiable" response.
Fixes#40940
Change-Id: I3e89f8326c14af30d8bdb126998a50e02ba002d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/252497
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
While debugging #40771, I realized that the chatty printer should only
ever print to a single io.Writer (normally os.Stdout). The other
Writer implementations in the chain write to local buffers, but if we
wrote a test's output to a local buffer, then we did *not* write it to
stdout and we should not store it as the most recently logged test.
Because the chatty printer should only ever print to one place, it
shouldn't receive an io.Writer as an argument — rather, it shouldn't
be used at all for destinations other than the main output stream.
On the other hand, when we flush the output buffer to stdout in the
top-level flushToParent call, it is important that we not allow some
other test's output to intrude between the test summary header and the
remainder of the test's output. cmd/test2json doesn't know how to
parse such an intrusion, and it's confusing to humans too.
No test because I couldn't reproduce the user-reported error without
modifying the testing package. (This behavior seems to be very
sensitive to output size and/or goroutine scheduling.)
Fixes#40771
Updates #38458
Change-Id: Ic19bf1d535672b096ba1c8583a3b74aab6d6d766
Reviewed-on: https://go-review.googlesource.com/c/go/+/249026
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Process may crash becaues acquireLockRank and releaseLockRank may
be called in nosplit context. With optimizations and inlining
disabled, these functions won't get inlined or have their morestack
calls eliminated.
Nosplit is not strictly required for lockWithRank, unlockWithRank
and lockWithRankMayAcquire, just keep consistency with lockrank_on.go
here.
Fixes#40843
Change-Id: I5824119f98a1da66d767cdb9a60dffe768f13c81
GitHub-Last-Rev: 38fd3ccf6e
GitHub-Pull-Request: golang/go#40844
Reviewed-on: https://go-review.googlesource.com/c/go/+/248878
Reviewed-by: Dan Scales <danscales@google.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
cgo effectively prepends -I${SRCDIR} to the header include path of all
preambles it processes, so when an #include <> matches a header file
both in the source directory and also another include directory, the
local copy will be used in preference.
This behaviour is surprising but unfortunately also longstanding and
relied upon by packages in the wild, so the best we can do is to
document it.
Fixes#41059
Change-Id: If6d2818294b2bd94ea0fe5fd6ce77e54b3e167a6
Reviewed-on: https://go-review.googlesource.com/c/go/+/251758
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I decided to add package and module diagrams to the test cases to make
them easier to follow.
While adding those diagrams, I noticed some strong similarities among
a couple of the graphs, so I consolidated those cases (and deleted the
redundant tests).
For #36460
Change-Id: Id6cd04fc871379b83851c2d1af89ea9296a0f3e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/251997
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
That test tested that import paths with non-ASCII unicode paths
were allowed by the Go command. Remove this test case because
golang.org/cl/251878 removes that support.
Also rewrite a test case in TestRepoRootForImportPath in the test
for cmd/go/internal/get to reflect that unicode directory names are now
disallowed.
Updates #29101
Change-Id: I669e220facd04fc82ccd05dd08e8f1ff4d48b1fd
Reviewed-on: https://go-review.googlesource.com/c/go/+/252297
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Previously, if an example test invoked runtime.Goexit, it would
pass yet hang until a timeout, while regular tests that invoke
runtime.Goexit do fail. This change removes that inconsistent
behavior and makes such example tests fail, and panic with an
indication of having invoked runtime.Goexit.
Fixes#41084
Change-Id: I0ffa152204f2b1580f4d5d6961ba1ce6b13fc022
Reviewed-on: https://go-review.googlesource.com/c/go/+/251857
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The copy of CheckImportPath in path.go and the regular expression for github
repos in vcsPaths together allow import paths with unicode letters with import
paths. These all come from github repos with non-ASCII unicode letters
with paths in directories. This mainly shows up in GOPATH mode, but could
also show up in Module mode when getting a module in GOPROXY=direct mode.
We expect there to not be any significant affected users of this change--
an investingation of github repos that would produce import paths that
would comply with the copy CheckImportPaths that's being removed, but not
modload.CheckImportPaths only surfaced a handful of cases, all of which
seemed to be small test or demonstation repos. But this CL is being
submitted early in the cycle so that it can be backed out if need be.
Updates #29101
Change-Id: I719df4af5b318e1330e90d8a0bffe5bb8d816f4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/251878
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This pulls in golang.org/cl/250920 which rejects Windows shortnames as
path components in module.CheckImportPath (as is already done in
cmd/go/internal/get's copy of CheckImportPath). This will allow us to replace
the copy of CheckImportPath with the original.
This also pulls in golang.org/cl/250919 which rejects + in CheckPath and
CheckImportPath, and golang.org/cl/235597, which adds methods to the zip
package for gorelease, but shouldn't affect cmd.
This change also updates the cmd/go test case TestScript/mod_bad_filenames
to reflect that golang.org/x/mod/zip error messages now include filenames
for bad file names that can't be included in zip archives.
Updates #29101
Change-Id: I7f654325dc33b19bc9c6f77a56546747add5a47f
Reviewed-on: https://go-review.googlesource.com/c/go/+/251877
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Rather than probe and guess if sendfile will work inside ResponseWriter.ReadFrom(src),
this change fixes the underlying issue of starting to respond before src is readable
We'll no longer send a status OK if a header has not yet been written and reading
from src is destined to fail. This small change implicitly takes care of the need for
the server to sniff the response body to determine the Content-Type.
This allows splice to work on Linux when src is a socket or any non-regular file that's spliceable.
The extra read of 512 bytes may raise an objection, and that's fair, but
we're already swapping some syscall prep work for another and a read of
512 probably will not impact the overall performance. For shorter
bodies, there's likely less setup time. A little initial slop is not too
unusual in zero copy network code, and sometimes actually helps.
Fixes#40888
Change-Id: I4a8e2ad0ace1318bae66dae5671d06ea6d4838ed
GitHub-Last-Rev: 097364ea86
GitHub-Pull-Request: golang/go#40903
Reviewed-on: https://go-review.googlesource.com/c/go/+/249238
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
commit 72ec930fa7 added basic support for
relocations, but assumed that the symbol value would be 0, likely because
.debug_info always has address == 0 in the ELF section headers.
CL 195679 added further support for relocations, but explicitly encoded
the original assumption that section addresses would be 0.
This change removes that assumption: all relocations will now be
properly computed based on the target symbol value even when that symbol
is a section with a non-zero address.
Typically, sections that are part of a LOAD program segment have
non-zero addresses. For example, .debug_ranges relocations could be
relative to .text, which usually has an address > 0.
Fixes#40879
Change-Id: Ib0a616bb8b05d6c96d179b03ca33a10946fc5d59
GitHub-Last-Rev: 4200de7326
GitHub-Pull-Request: golang/go#41038
Reviewed-on: https://go-review.googlesource.com/c/go/+/250559
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Remove an extra int32-representable check when deciding to use an int32
constant as an immediate value.
Comment out a broken optimization that relies on MaxUint32 being
representable by a signed int32. It never triggers and when fixed, the
signedness of the auxint prevents other optimization passes from
handling it properly, thus causing segfaults in the runtime.
Remove a couple offset representable in 32-bits checks on 32-bit aux
vals.
toolstash-check clean
Change-Id: I148b53403fde523c90d692cb90e412460664b439
Reviewed-on: https://go-review.googlesource.com/c/go/+/230458
Reviewed-by: Keith Randall <khr@golang.org>
We currently use two fields to store the targets of branches.
Some phases use p.To.Val, some use p.Pcond. Rewrite so that
every branch instruction uses p.To.Val.
p.From.Val is also used in rare instances.
Introduce a Pool link for use by arm/arm64, instead of
repurposing Pcond.
This is a cleanup CL in preparation for some stack frame CLs.
Change-Id: If8239177e4b1ea2bccd0608eb39553d23210d405
Reviewed-on: https://go-review.googlesource.com/c/go/+/251437
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Also don't restart DWARF reading from beginning when we are testing
multiple entries.
Also reformat relocationTests slice to use indexed literals.
Change-Id: Ia5f17214483394d0ef033be516df61f0bdc521b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/251637
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
When zero or less, maxIdleTime and maxLifetime means unlimited.
Helper function shortestIdleTimeLocked must not return the
minimum of the two until both are verified to be greater
then zero.
Fixes#40841
Change-Id: I1130332baf4ad259cd90c10f4221f5def8510655
Reviewed-on: https://go-review.googlesource.com/c/go/+/248817
Reviewed-by: Daniel Theophanes <kardianos@gmail.com>
The order array was zero initialized by the compiler, but ends up being
overwritten by the runtime anyway.
So let the runtime takes full responsibility for initializing, save us
one instruction per select.
Fixes#40399
Change-Id: Iec1eca27ad7180d4fcb3cc9ef97348206b7fe6b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/251517
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The current command will run this entire set of tests, which takes a
noticeable amount of time. Contributors may wish to run only a subset of
these tests to save time/compute (e.g. when iterating on a CL that
failed tests in that subset). Listing file(s) as operands to the command
will run only those tests.
Change-Id: I1874c43681a594190bc40b61cee0b8d321be73f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/242997
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
This was fixed by CL 242084. Retroactively add some tests that would
have failed before the fix.
Also, remove some existing duplicate tests.
Change-Id: I95f7a215d4a9651ded6d739f89c574f33f573c60
Reviewed-on: https://go-review.googlesource.com/c/go/+/251397
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
There was some duplication of logic interpreting the implicit type of
an operand in assignableTo and convertUntyped. Factor out this logic to
a new 'implicitType' function, which returns the implicit type of an
untyped operand when used in a context where a target type is expected.
I believe this resolves some comments about code duplication. There is
other similar code in assignable, assignableTo, and convertUntypes, but
I found it to to be sufficiently semantically distinct to not warrant
factoring out.
Change-Id: I199298a2e58fcf05344318fca0226b460c57867d
Reviewed-on: https://go-review.googlesource.com/c/go/+/242084
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
cmd/go.TestScript/test_main_twice demonstrates a program that invokes
(*M).Run twice in a row. If we only restore os.Exit(0) in m.afterOnce,
we will fail to restore it after the second run and fail the test
process despite both runs passing.
Updates #29062
Updates #23129
Change-Id: Id22ec68f1708e4583c8dda14a8ba0efae7178b85
Reviewed-on: https://go-review.googlesource.com/c/go/+/251262
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We're using sort.SliceStable, so no need to keep track of indexes as well.
Use a more robust test for whether a node is a call.
Add a test that we're actually reordering comparisons. This test fails
without the alg.go changes in this CL because eqstring uses OCALLFUNC
instead of OCALL for its data comparisons.
Update #8606
Change-Id: Ieeec33434c72e3aa328deb11cc415cfda05632e2
Reviewed-on: https://go-review.googlesource.com/c/go/+/237921
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
We currently use two fields to store the targets of branches.
Some phases use p.To.Val, some use p.Pcond. Rewrite so that
every branch instruction uses p.To.Val.
p.From.Val is also used in rare instances.
Introduce a Pool link for use by arm/arm64, instead of
repurposing Pcond.
This is a cleanup CL in preparation for some stack frame CLs.
Change-Id: I9055bf0a1d986aff421e47951a1dedc301c846f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/243318
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
cgo parses GCC’s error messages to classify C identifiers referenced
from Go programs (are they integer constants? type names?). If GCC tries
to colorize its errors, cgo can’t figure out what GCC is saying. GCC
avoids escape sequences in this scenario by default, but the default
behavior can be overridden in at least two places:
- The user can set `CGO_COPTS=-fdiagnostics-color`.
- Whoever compiled GCC can configure GCC itself to always colorize
output.
The most reliable way to ensure that GCC doesn’t colorize output is to
append `-fdiagnostics-color=never` to the GCC command line; do so.
Fixes#40415
Change-Id: Id4bdf8d92fac8b038340b4264f726e8fe38875b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/248398
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This merges an lis + subf into subfic, and for 32b constants
lwa + subf into oris + ori + subf.
The carry bit is no longer used in code generation, therefore
I think we can clobber it as needed. Note, lowered borrow/carry
arithmetic is self-contained and thus is not affected.
A few extra rules are added to ensure early transformations to
SUBFCconst don't trip up earlier rules, fold constant operations,
or otherwise simplify lowering. Likewise, tests are added to
ensure all rules are hit. Generic constant folding catches
trivial cases, however some lowering rules insert arithmetic
which can introduce new opportunities (e.g BitLen or Slicemask).
I couldn't find a specific benchmark to demonstrate noteworthy
improvements, but this is generating subfic in many of the default
bent test binaries, so we are at least saving a little code space.
Change-Id: Iad7c6e5767eaa9dc24dc1c989bd1c8cfe1982012
Reviewed-on: https://go-review.googlesource.com/c/go/+/249461
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
This is a port of CL 244628, updated to move some existing regression
tests into the fixedbugs directory, and to use subtests. Also,
'TestFixed' is renamed to 'TestFixedBugs'.
Change-Id: I43aac3f75f2bd850567d08e8b008d91aeb717064
Reviewed-on: https://go-review.googlesource.com/c/go/+/247904
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Better still would be to avoid passing around module.Version instances
with invalid Version strings in the first place, so that any time we
see a module.Version we know that it is actually a version of a module
(and not a structurally-similar datum with something else tacked on to
one of the fields). But that's a bigger cleanup for which I don't
currently have enough bandwidth.
Fixes#41060
Change-Id: I32fba5619105cbf67dd03691064c82b8ebb3ce18
Reviewed-on: https://go-review.googlesource.com/c/go/+/250951
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
TestBenchmark is broken due to lack of a Config.Importer, but
unfortunately fails silently due to an unchecked error.
Fix the importer and check the error. Also improve the output to include
allocation stats.
Finally, don't run TestBenchmark on go/types by default. If the
benchmark is being used during a refactoring of go/types itself, results
for go/types will not be comparable.
Change-Id: Ib6bdb6807403b3ec99762f535e2496c94bd9b6e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/249517
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Add s390x support to the addressing modes pass. This significantly
reduces the number of rules we need to have to handle indexed
addressing modes on s390x.
There are some changes introduced with the new approach. Notably
pointer calculations of the form '(ADD x (ADDconst y [c]))' won't
get fully merged into address fields right now, the constant offset
will remain separate. That is a relatively minor issue though.
file before after Δ %
addr2line 4120904 4120960 +56 +0.001%
api 4944005 4948765 +4760 +0.096%
asm 4977431 4984335 +6904 +0.139%
buildid 2683760 2683504 -256 -0.010%
cgo 4557976 4558408 +432 +0.009%
compile 19103577 18916634 -186943 -0.979%
cover 4883694 4885054 +1360 +0.028%
dist 3545177 3553689 +8512 +0.240%
doc 3921766 3921518 -248 -0.006%
fix 3295254 3302182 +6928 +0.210%
link 6539222 6540286 +1064 +0.016%
nm 4105085 4107757 +2672 +0.065%
objdump 4546015 4545439 -576 -0.013%
pack 2416661 2415485 -1176 -0.049%
pprof 13267433 13265489 -1944 -0.015%
test2json 2762180 2761996 -184 -0.007%
trace 10145090 10135626 -9464 -0.093%
vet 6772946 6771738 -1208 -0.018%
total 106588176 106418865 -169311 -0.159%
Fixes#37891.
Change-Id: If60d51f31eb2806b011432a6519951b8668cb42f
Reviewed-on: https://go-review.googlesource.com/c/go/+/250958
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The AssignableTo API is specifically for non-constant values, but is
currently called by gopls for constant completions. Add a test to ensure
that we handle this edge case correctly.
Change-Id: I83115cbca2443a783df1c3090b5741260dffb78e
Reviewed-on: https://go-review.googlesource.com/c/go/+/250258
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The error returned by convertUntyped is 'cannot convert _ to _', which
can be misleading in contexts where an explicit conversion would be
allowed.
Arguably the error message from convertUntyped should just be 'cannot
use _ as _', as 'convert' has an explicit meaning within the spec.
Making that change caused a large number of test failures, so for now we
just fix this for assignments by interpreting the error.
For #22070
Change-Id: I4eed6f39d1a991e8df7e035ec301d28a05150eb5
Reviewed-on: https://go-review.googlesource.com/c/go/+/242083
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The intermediate SSA opcodes* are no longer generated during the
lowering pass. The shifting rules have been improved using ISEL.
Therefore, we can remove them and the rules which expand them.
* The removed opcodes are:
LoweredAdd64Carry
ADDconstForCarry
MaskIfNotCarry
FlagCarryClear
FlagCarrySet
Change-Id: I1ebe2726ed988f29ed4800c8f57b428f7a214cd0
Reviewed-on: https://go-review.googlesource.com/c/go/+/249462
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
This change rejects module paths that don't conform to
the new checkModulePathLax function, when loading a go.mod
file. The change uses the checkModulePathLax function instead of
CheckPath because there are still many users who are using
unpublished modules with unpublishable paths, and we don't
want to break them all.
Next, before this change, when go mod init is run in GOPATH,
it would try to use the location of the directory within GOPATH
to infer the module path. After this change, it will only use
that inferred module path if it conforms to module.CheckPath.
Change-Id: Idb36d1655cc76aae82671e87ba634609503ad1a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/211597
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
'go get' will now warn about retracted versions in the build list,
after updating go.mod. The warning instructs users to run
'go get module@latest' to upgrade or downgrade away from the retracted
version.
'go get' now allows users to explicitly request a specific retracted
version.
For #24031
Change-Id: I15fda918dc84258fb35b615dcd33b0f499481bd7
Reviewed-on: https://go-review.googlesource.com/c/go/+/228383
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The -retracted flag causes 'go list' to load information about
retracted module module versions.
When -retracted is used with -f or -json, the Retracted field is set
to a string containing the reason for the retraction on retracted
module versions. The string is based on comments on the retract
directive. This field is also populated when the -u flag is used.
When -retracted is used with -versions, retracted versions are shown.
Normally, they are omitted.
For #24031
Change-Id: Ic13d516eddffb1b8404e21034f78cecc9896d1b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/228382
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The go command now recognizes 'retract' directives in go.mod. A
retract directive may be used by a module author to indicate a
version should not be used. The go command will not automatically
upgrade to a retracted version. Retracted versions will not be
considered when resolving version queries like "latest" that don't
refer to a specific version.
Internally, when the go command resolves a version query, it will find
the highest release version (or pre-release if no release is
available), then it will load retractions from the go.mod file for
that version. Comments on retractions are treated as a rationale and
may appear in error messages. Retractions are only loaded when a query
is resolved, so this should have no impact on performance for most
builds, except when go.mod is incomplete.
For #24031
Change-Id: I17d643b9e03a3445676dbf1a5a351090c6ff6914
Reviewed-on: https://go-review.googlesource.com/c/go/+/228380
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Query and other functions now accept an "allowed" function that
returns an error (previously, the function returned a bool). If the
error is equivalent to ErrDisallowed, it indicates the version is
excluded (or, in a future CL, retracted). This provides predicates a
chance to explain why a version is not allowed.
When a query refers to a specific revision (by version, branch, tag,
or commit name), most callers will not use the Allowed predicate. This
allows commands like 'go list -m' and 'go mod download' to handle
disallowed versions when explicitly requested. 'go get' will reject
excluded versions though.
When a query does not refer to a specific revision (for example,
"latest"), disallowed versions will not be considered.
When an "allowed" predicate returns an error not equivalent to
ErrDisallowed, it may be ignored or returned, depending on the
case. This never happens for excluded versions, but it may happen for
retractions (in a future CL). This indicates a list of retractions
could not be loaded. This frequently happens when offline, and it
shouldn't cause a fatal or warning in most cases.
For #24031
Change-Id: I4df6fb6bd60e3e0259e5b3b4bf71a307b4b32298
Reviewed-on: https://go-review.googlesource.com/c/go/+/228379
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
cmd/internal/objabi/doc.go has comments decribing the (old)
object file format. But cmd/internal/objabi has nothing to do
with object files, and never did. Delete.
Move some comment to cmd/internal/goobj, where the (new) object
file format is actually defined, and update to reflect the
current status.
Change-Id: Ied96089df4be35e5d259a572ed60ee00f2cd0d1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/249958
Reviewed-by: Than McIntosh <thanm@google.com>
This CL applies strong aux typing to the remaining s390x rewrite
rules in preparation for strong aux typing becoming the default.
Passes toolstash-check on s390x.
Change-Id: Id585b0db492780737818024e1b22b4837435b525
Reviewed-on: https://go-review.googlesource.com/c/go/+/250558
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
JavaScript environments are quite unpredictable because bundlers add
mocks for compatibility and libraries can polute the global namespace.
Detect more of such situations:
- Add check that require("fs") returns an object.
- Fix check that require("fs") returns an non-empty object.
- Add check that "module" is defined.
Fixes#40730
Change-Id: I2ce65fc7db64bbbb0b60eec79a4cfe5c3fec99c0
Reviewed-on: https://go-review.googlesource.com/c/go/+/248758
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
CL 220905 added code to identify alternate transports that always error
by using http2erringRoundTripper. This does not work when the transport
is from another package, e.g., http2.erringRoundTripper.
Expose a new method that allow detection of such a RoundTripper.
Switch to an interface that is both a RoundTripper and can return the
underlying error.
Fixes#40213
Change-Id: I170739857ab9e99dffb5fa55c99b24b23c2f9c54
Reviewed-on: https://go-review.googlesource.com/c/go/+/243258
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In order to generate more accurate or informative error messages from
the type checker, it can be helpful to interpret error messages in
context. This is currently achieved in a number of ways:
+ Return a boolean value, and then reverse-engineer the error at the
callsite (as in representable->representableConst).
+ Return a value causing the error (as in Checker.missingMethod), and
add the error at the callsite.
+ Pass a "reason" string pointer to capture the error (as in
Checker.assignableTo), and add the error at the callsite.
+ Pass a "context" string pointer, and use this when writing errors in
the delegated method.
In all cases, it is the responsibility of whatever code calls
Checker.error* to set the operand mode to invalid.
These methods are used as appropriate, depending on whether multiple
errors are generated, whether additional context is needed, and whether
the mere presence of an error needs to be interpreted at the callsite.
However, this practice has some downsides: the plurality of error
handling techniques can be a barrier to readability and composability.
In this CL, we introduce Yet Another Pattern, with the hope that it can
replace some or all of the existing techniques: factor out side-effect
free functions that evaluate a single error, and add helpers for
recording this error in the Checker.
As a proof of concept this is done for Checker.representable and
Checker.convertUntyped. If the general pattern does not seem appropriate
for replacing some or all of the error-handling techniques listed above,
we should revert to an established technique.
Some internal error APIs are refactored to operate on an error, rather
than a types.Error, with internal error metadata extracted using
errors.As. This seemed to have negligible impact on performance, but we
should be careful about actually wrapping errors: I expect that many
users will expect err to be a types.Error.
Change-Id: Ic5c6edcdc02768cd84e04638fad648934bcf3c17
Reviewed-on: https://go-review.googlesource.com/c/go/+/242082
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fix a data race for clients that mutate requests after receiving a
response error which is caused by the writeLoop goroutine left
running, this can be seen on canceled requests.
Fixes#37669
Change-Id: I0e0e4fd63266326b32587d8596456760bf848b13
Reviewed-on: https://go-review.googlesource.com/c/go/+/232799
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Old behavior is still enabled because it doesn't hurt to leave
it in and existing users of this feature (there are dozens of
us!) will not be surprised. Adding this finer control allows
users to avoid writing ssa.html where they can't, shouldn't, or
just don't want to.
Example, both ways:
$ GOSSAFUNC="(*Reader).Reset" go test -c -o ./a compress/gzip
dumped SSA to bytes/ssa.html
dumped SSA to strings/ssa.html
dumped SSA to bufio/ssa.html
dumped SSA to compress/gzip/ssa.html
$ GOSSAFUNC="compress/gzip.(*Reader).Reset" go test -c -o ./a compress/gzip
dumped SSA to compress/gzip/ssa.html
Updates #40919.
Change-Id: I06b77c3c1d326372a32651570b5dd6e56dfb1d7f
Reviewed-on: https://go-review.googlesource.com/c/go/+/250340
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The StripPrefix wrapper strips a prefix string from the request's
URL.Path field, but doesn't touch the RawPath field. This leads to the
confusing situation when StripPrefix handles a request with URL.RawPath
populated (due to some escaped characters in the request path) and the
wrapped request's RawPath contains the prefix but Path does not.
This change modifies StripPrefix to strip the prefix from both Path and
RawPath. If there are escaped characters in the prefix part of the
request URL the stripped handler serves a 404 instead of invoking the
underlying handler with a mismatched Path/RawPath pair.
This is a backward incompatible change for a very small minority of
requests; I would be surprised if anyone is depending on this behavior,
but it is possible. If that's the case, we could make a more
conservative change where the RawPath is trimmed if possible, but when
the prefix contains escaped characters then we don't 404 but rather send
through the invalid Path/RawPath pair as before.
Fixes#24366
Change-Id: I7030b8c183a3dfce307bc0272bba9a18df4cfe08
Reviewed-on: https://go-review.googlesource.com/c/go/+/233637
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Previously, Readdirnames returned a *PathError on Windows and Plan 9,
but a *SyscallError on POSIX systems.
In contrast, similar methods (such as Stat) return a *PathError on all platforms.
Fixes#38923
Change-Id: I26395905b1e723933f07b792c7aeee7c335949cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/233917
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Right now we just prevent such types from being on the heap. This CL
makes it so they cannot appear on the stack either. The distinction
between heap and stack is pretty vague at the language level (e.g. it
is affected by -N), and we don't need the flexibility anyway.
Once go:notinheap types cannot be in either place, we don't need to
consider pointers to such types to be pointers, at least according to
the garbage collector and stack copying. (This is the big win of this
CL, in my opinion.)
The distinction between HasPointers and HasHeapPointer no longer
exists. There is only HasPointers.
This CL is cleanup before possible use of go:notinheap to fix#40954.
Update #13386
Change-Id: Ibd895aadf001c0385078a6d4809c3f374991231a
Reviewed-on: https://go-review.googlesource.com/c/go/+/249917
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
par.Work performs two different tasks: deduplicating work (a task
which overlaps with par.Cache), and executing limited active work in
parallel. It also requires the caller to re-invoke Do whenever the
workqueue transititions from empty to non-empty.
The new par.Queue only performs the second of those two tasks, and
presents a simpler API: it starts and stops its own goroutines as
needed (indicating its idle state via a channel), rather than
expecting the caller to drive the transitions explicitly.
For #36460
Change-Id: I5c38657dda63ab55718497467d05d41744ff59f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/247766
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously they were cached per mvsReqs instance. However, the
contents of the go.mod file of a given dependency version can only
vary if the 'replace' directives that apply to that version have
changed, and the only time we change 'replace' directives is in 'go
mod edit' (which does not care about the build list or MVS).
This not only simplifies the mvsReqs implementation, but also makes
more of the underlying logic independent of mvsReqs.
For #36460
Change-Id: Ieac20c2fcd56f64d847ac8a1b40f9361ece78663
Reviewed-on: https://go-review.googlesource.com/c/go/+/244774
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously, this cache was a member of the (ephemeral) modload.loader
struct. However, the Go language version for a given module version
does not vary based on the build list, the set of loaded packages, the
build tags in use, the meaning of the "all" pattern, or anything else
that can be configured for an instance of the package loader. The map
containing that information is therefore not appropriate as a field of
the (configurable, package-list-dependent) loader struct.
The Go language version mapping could, in theory, be read from the
go.mod file in the module cache (or replacement directory) every time
it is needed: this map is just a cache, and as such it belongs
alongside the other caches and indexes in the modload package, which
are currently found in modfile.go.
We may want to do the same sort of global caching for the mapping from
each module.Version to its list of direct requirements (which are
similarly idempotent), but for now that is left for a future change.
For #36460
For #36876
Change-Id: I90ac176ffea97f30c47d6540c3dfb874dc9cfa4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/244078
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Previously, we suppressed the module version annotation if the last
error in the stack was a *module.ModuleError, regardless of its path.
However, if the error is for a replacement module, that produces a
confusing error message: the error is attributed to the last module in
the error path, but actually originates in the replacement (which is
not otherwise indicated).
Now, we print both the original and the replacement modules when they
differ, which may add some unfortunate redundancy in the output but at
least doesn't drop the very relevant information about replacements.
Fixes#35039
Change-Id: I631a7398033602b1bd5656150a4fad4945a87ade
Reviewed-on: https://go-review.googlesource.com/c/go/+/247765
Reviewed-by: Jay Conrod <jayconrod@google.com>
When we print the stack from a BuildListError, we print the main
module first and the error last. That was the opposite of the order in
which in was stored in memory, leading to (arguably) more complex code
and (definitely) my own inability to reason about the contents of the
slice.
For now, it's still more convenient to construct the stack reversed,
so we do that and then reverse it before packing it into the error.
For #36460
Change-Id: I6312fb67b2ad9bf9b64071fe829854833208bad7
Reviewed-on: https://go-review.googlesource.com/c/go/+/244759
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously, when we encountered an excluded version in any module's
requirements, we would resolve it to the next higher version.
Unfortunately, the meaning of “the next higher version” can change
over time.
Moreover, users who use 'exclude' directives normally either already
require some higher version (using the 'exclude' directive to prune
out invalid requirements from some intermediate version), or already
require some lower version (using the 'exclude' directive to prevent
'go get -u' from upgrading to a known-bad version). In both of these
cases, resolving an upgrade for the excluded version is needless work
even in the best case: it adds work for the 'go' command when there is
already a perfectly usable selected version of the module in the
requirement graph.
Instead, we now interpret the 'exclude' directive as dropping all
references to the excluded version.
This implements the approach described in
https://golang.org/issue/36465#issuecomment-572694990.
Fixes#36465
Updates #36460
Change-Id: Ibf0187daced417b4cc23b97125826778658e4b0f
Reviewed-on: https://go-review.googlesource.com/c/go/+/244773
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This allows semver-based comparisons of the version without additional allocations.
Also comment on the reason for the loops that iterate over modFile instead.
(I was reading the vendor code in order to add the lazy-loading version check,
and this section was a bit unclear to me.)
For #36460
Change-Id: I11559d81ffb4eba0e4e10e6fa3c01990b11f9180
Reviewed-on: https://go-review.googlesource.com/c/go/+/240622
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Due to a typo, this test case was not actually exercising the bug
described in golang/go#33656. Update it to do so. Interestingly, the
comparison is now valid (as it should be) -- I suspect #33656 is
actually fixed.
Fixes#33656
Change-Id: If50a917f6477d8eb4f82f5a2a96bf5d9123ff0d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/241263
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
These exported functions are mostly trivial wrappers, but do make
certain assumptions about how the underlying Checker APIs can be called.
Add some simple tests.
Change-Id: I68e9ae875353c12d118ec961a6f3834385fbbb97
Reviewed-on: https://go-review.googlesource.com/c/go/+/241262
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
With this patch, opt pass can expose more obvious constant-folding
opportunites.
Example:
func test(i int) int {return (i+8)-(i+4)}
The previous version:
MOVD "".i(FP), R0
ADD $8, R0, R1
ADD $4, R0, R0
SUB R0, R1, R0
MOVD R0, "".~r1+8(FP)
RET (R30)
The optimized version:
MOVD $4, R0
MOVD R0, "".~r1+8(FP)
RET (R30)
This patch removes some existing reassociation rules, such as "x+(z-C)",
because the current generic rewrite rules will canonicalize "x-const"
to "x+(-const)", making "x+(z-C)" equal to "x+(z+(-C))".
This patch also adds test cases.
Change-Id: I857108ba0b5fcc18a879eeab38e2551bc4277797
Reviewed-on: https://go-review.googlesource.com/c/go/+/237137
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This patch adds the ARM6464Bitfield auxInt to auxIntType() and
returns its Go type as "arm64Bitfield" type, which is defined
as int16 type.
And the Go type of SymOff auxInt is int32, but some functions
(such as min(), areAdjacentOffsets() and read16/32/64(),etc.)
use SymOff as an input parameter and treat its type as int64,
this patch adds the type conversion for these rules.
Passes toolstash-check -all.
Change-Id: Ib234b48d0a97ef244dd37878e06b5825316dd782
Reviewed-on: https://go-review.googlesource.com/c/go/+/234378
Reviewed-by: Keith Randall <khr@golang.org>
Add a new conversion function to convert aux type to Op type.
Passes toolstash-check -all.
Change-Id: I25d649a5296f6f178d64320dfc5d291e0a597e24
Reviewed-on: https://go-review.googlesource.com/c/go/+/233739
Reviewed-by: Keith Randall <khr@golang.org>
Add a check code for checking whether the "c" value can be
represented as a signed 32 bit integer in some rules.
Passes toolstash-check -all.
Change-Id: I84e4431dc75945985695516d34565b841c8b53e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/233738
Reviewed-by: Keith Randall <khr@golang.org>
CL 249962 added wasm StorepNoWB implementation in assembly, it's now
like all other architectures. This CL adds a general test that the
second param of StorepNoWB must be force to escape.
Fixes#40975
Change-Id: I1eccc7e50a3ec742a1912d65f25b15f9f5ad9241
Reviewed-on: https://go-review.googlesource.com/c/go/+/249761
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Turns out if your failure is in a function with a name like "Reset()"
there will be a lot of hits on the same hashcode. Adding package sensitivity
solves this problem.
In additionm, it turned out that in the case that a logfile was specified
for the GOSSAHASH logging, that it was opened in create mode, which meant
that multiple compiler invocations would reset the file to zero length.
Opening in append mode works better; the automated harness
(github.com/dr2chase/gossahash) takes care of truncating the file before use.
Change-Id: I5601bc280faa94cbd507d302448831849db6c842
Reviewed-on: https://go-review.googlesource.com/c/go/+/246937
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The second argument of StorepNoWB must be forced to escape.
The current Go code does not explicitly enforce that property.
By implementing in assembly, and not using go:noescape, we
force the issue.
Test is in CL 249761. Issue #40975.
This CL is needed for CL 249917, which changes how go:notinheap
works and breaks the previous StorepNoWB wasm code.
I checked for other possible errors like this. This is the only
go:notinheap that isn't in the runtime itself.
Change-Id: I43400a806662655727c4a3baa8902b63bdc9fa57
Reviewed-on: https://go-review.googlesource.com/c/go/+/249962
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Current peFile.goarch looks for symbols like "_rt0_386_windows" to
determine GOARCH. But "_rt0_386_windows" is not present in executables
built with cgo.
Use pe.FileHeader.Machine instead. This should work with any Windows
executable, not just with Go built executable.
Fixes#39682
Change-Id: Ie0ffce664f4b8b8fed69b2ecc482425b042a38d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/240957
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
In
type T1 struct { t2 }
type t2 int
func (t2) M()
T1 has method M because it embeds t2, which has M. Classify
the example
func ExampleT1_M
with T1 instead of ignoring it, as is done currently. There is no
other way to provide an example for such a method, since its original
type is unexported.
Continue to ignore examples on methods from embedded types that are
exported, unless in AllMethods mode. Examples for those methods could
be written on the original type.
The change involves removing a check in classifyExamples. The check
isn't necessary to get the above behavior because
reader.collectEmbeddedMethods and sortedFuncs already generate the
appropriate list of methods.
For #40172.
Change-Id: Ibe7d965ecba6426466184e6e6655fc05989e9caf
Reviewed-on: https://go-review.googlesource.com/c/go/+/249557
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
checkptr has code to recognize &^ expressions, but it didn't take into
account that "p &^ x" gets rewritten to "p & ^x" during walk, which
resulted in false positive diagnostics.
This CL changes walkexpr to mark OANDNOT expressions with Implicit
when they're rewritten to OAND, so that walkCheckPtrArithmetic can
still recognize them later.
It would be slightly more idiomatic to instead mark the OBITNOT
expression as Implicit (as it's a compiler-generated Node), but the
OBITNOT expression might get constant folded. It's not worth the extra
complexity/subtlety of relying on n.Right.Orig, so we set Implicit on
the OAND node instead.
To atone for this transgression, I add documentation for nodeImplicit.
Fixes#40917.
Change-Id: I386304171ad299c530e151e5924f179e9a5fd5b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/249477
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The optimization that replaces inline markers with pre-existing
instructions assumes that 'Prog' values produced by the compiler are
still reachable after the assembler has run. This was not true on
s390x where the assembler was removing NOP instructions from the
linked list of 'Prog' values. This led to broken inlining data
which in turn caused an infinite loop in the runtime traceback code.
Fix this by stopping the s390x assembler backend removing NOP
values. It does not make any difference to the output of the
assembler because NOP instructions are 0 bytes long anyway.
Fixes#40473.
Change-Id: I9b97c494afaae2d5ed6bca4cd428b4132b5f8133
Reviewed-on: https://go-review.googlesource.com/c/go/+/249448
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change does context propagation (and only context propagation)
necessary to add context to modfetch.Download and pkg.LoadImport.
This was done by adding context to their callers, and then
adding context to all call-sites, and then repeating adding
context to callers of those enclosing functions and their
callers until none were left. In some cases the call graph expansion
was pruned by using context.TODOs.
The next CL will add a span to Download. I kept it out of this
change to avoid making it any larger (and harder to review)
than it needs to be.
Updates #38714
Change-Id: I7a03416e04a14ca71636d96f2c1bda2c4c30d348
Reviewed-on: https://go-review.googlesource.com/c/go/+/249021
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Opening the html writer can fail, and the failure printer wants
to use the entry block's line number. So make sure we set up
the entry block first.
Fixes#40919
Change-Id: I4ffa2839b45a721bbaf04ff84418e8108fa1cc37
Reviewed-on: https://go-review.googlesource.com/c/go/+/249497
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
par.Work is used in a number of places as a parallel
work queue. This change replaces it with goroutines
and channels in a number of simpler places where it's
used.
This is the same CL as golang.org/cl/240062 and golang.org/cl/248326
except for the following changes in convert.go (all line numbers
from this CL), as well as fixing up imports in download.go:
- On line 44, the "*" before modules.Versions is removed (we were
trying to assign to a nil value on lines 72 and 73).
- Line 64 is new, and ensures that we receive on the semaphore
channel once the goroutine function exits. (The previous versions
of this CL only received at the end of the function, ignoring
the return point in the branch in the middle of the function.)
- The semaphore channel receive right before line 74 is gone,
replaced with the deferred receive above.
- The if block at line 83 is new, accounting for cases where
modfetch.ImportRepoRev returned an error in the goroutine,
so that versions[i] is ignored.
Change-Id: I0e33670bb2eb0a1e4d7a5fa693a471e61ffbc8b7
Reviewed-on: https://go-review.googlesource.com/c/go/+/249020
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously, on Unix systems, when the profiler was enabled or disabled,
we called setitimer once per thread. With this change we instead call
it once per process.
Change-Id: I90f0189b562e11232816390dc7d55ed154bd836d
Reviewed-on: https://go-review.googlesource.com/c/go/+/240003
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
People sometimes expect Join to trim .. components from its arguments
before joining, and are surprised that it doesn't. This is bad if they
were relying on that assumed behaviour to prevent directory traversal
attacks.
While a careful reading of the documentation for Join and Clean
might dispel this notion, it is not obvious at first glance.
Add a case to the examples to nudge people in the right direction.
Updates #40373
Change-Id: Ib5792c12ba1000811a0c0eb77048196d0b26da60
Reviewed-on: https://go-review.googlesource.com/c/go/+/249177
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Add a new lowering rule to match and replace such instances
with the MADDLD instruction available on power9 where
possible.
Likewise, this plumbs in a new ppc64 ssa opcode to house
the newly generated MADDLD instructions.
When testing ed25519, this reduced binary size by 936B.
Similarly, MADDLD combination occcurs in a few other less
obvious cases such as division by constant.
Testing of golang.org/x/crypto/ed25519 shows non-trivial
speedup during keygeneration:
name old time/op new time/op delta
KeyGeneration 65.2µs ± 0% 63.1µs ± 0% -3.19%
Signing 64.3µs ± 0% 64.4µs ± 0% +0.16%
Verification 147µs ± 0% 147µs ± 0% +0.11%
Similarly, this test binary has shrunk by 66488B.
Change-Id: I077aeda7943119b41f07e4e62e44a648f16e4ad0
Reviewed-on: https://go-review.googlesource.com/c/go/+/248723
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Remove some unnecessary code. Most significantly, we can skip testing
"if ch == nil { block() }", because this is already the semantics
implied by normal send/receive operations.
Updates #40410.
Change-Id: I4acd33383cc876719fc3b998d85244d4ac1ff9d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/245126
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Currently, we include a "kind" field on scase to distinguish the three
kinds of cases in a select statement: sends, receives, and defaults.
This commit removes by kind field by instead arranging for the
compiler to always place sends before receives, and to provide their
counts separately. It also passes an explicit "block bool" parameter
to avoid needing to include a default case in the array.
It's safe to shuffle cases like this because the runtime will
randomize the order they're polled in anyway.
Fixes#40410.
Change-Id: Iaeaed4cf7bddd576d78f2c863bd91a03a5c82df2
Reviewed-on: https://go-review.googlesource.com/c/go/+/245125
Reviewed-by: Keith Randall <khr@golang.org>
Per-case PCs are only needed for race detector builds, so this allows
skipping allocating stack space for them for non-race builds.
It's possible to arrange the PCs and order arrays consecutively in
memory so that we could just reuse the order0 pointer to identify
both. However, there's more risk of that silently going wrong, so this
commit passes them as separate arguments for now. We can revisit this
in the future.
Updates #40410.
Change-Id: I8468bc25749e559891cb0cb007d1cc4a40fdd0f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/245124
Reviewed-by: Keith Randall <khr@golang.org>
Currently, selectgo does an initial pass over the cases array to look
for entries with nil channels, so they can be easily recognized and
skipped later on. But this still involves actually visiting the cases.
This commit changes selectgo to omit cases with nil channels when
constructing pollorder, so that they'll be skipped over entirely later
on. It also checks for caseDefault up front, which will facilitate
changing it to use a "block bool" parameter instead.
Updates #40410.
Change-Id: Icaebcb8f08df03cc33b6d8087616fb5585f7fedd
Reviewed-on: https://go-review.googlesource.com/c/go/+/245123
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
selectgo will report at most one block event, so there's no need to
keep a releasetime for every select case. It suffices to simply track
the releasetime of the case responsible for the wakeup.
Updates #40410.
Change-Id: I72679cd43dde80d7e6dbab21a78952a4372d1e79
Reviewed-on: https://go-review.googlesource.com/c/go/+/245122
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The current wakeup protocol for channel communications is that the
second goroutine sets gp.param to the sudog when a value is
successfully communicated over the channel, and to nil when the wakeup
is due to closing the channel.
Setting nil to indicate channel closure works okay for chansend and
chanrecv, because they're only communicating with one channel, so they
know it must be the channel that was closed. However, it means
selectgo has to re-poll all of the channels to figure out which one
was closed.
This commit adds a "success" field to sudog, and changes the wakeup
protocol to always set gp.param to sg, and to use sg.success to
indicate successful communication vs channel closure.
While here, this also reorganizes the chansend code slightly so that
the sudog is still released to the pool if the send blocks and then is
awoken because the channel closed.
Updates #40410.
Change-Id: I6cd9a20ebf9febe370a15af1b8afe24c5539efc6
Reviewed-on: https://go-review.googlesource.com/c/go/+/245019
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Replace strings.Split by strings.IndexByte and explicit
slicing to avoid the allocation of the return slice
of strings.Split.
name old time/op new time/op delta
Marshal 43.3µs ± 1% 36.7µs ± 1% -15.23% (p=0.000 n=9+9)
name old alloc/op new alloc/op delta
Marshal 10.7kB ± 0% 9.2kB ± 0% -13.96% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
Marshal 444 ± 0% 366 ± 0% -17.57% (p=0.000 n=10+10)
Change-Id: I9e727defa23f7e5fc684f246de0136fe28cf8d25
Reviewed-on: https://go-review.googlesource.com/c/go/+/231738
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We could instead fix cmd/test2json to treat PAUSE lines as *not*
changing the active test name, but that seems like it would be more
confusing to humans, and also wouldn't fix tools that parse output
using existing builds of cmd/test2json.
Fixes#40657
Change-Id: I937611778f5b1e7dd1d6e9f44424d7e725a589ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/248727
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jean de Klerk <deklerk@google.com>
There were two places where the -short flag was added in order to
speed up tests when run in short mode, in CL 178399 and CL 177417.
It appears viable to re-use the GO_TEST_SHORT value so that -short
flag is not used when the tests are executed on a longtest builder,
where it is not a goal to skip slow tests for improved performance.
Do so, in order to make the testing configurations simpler and more
predictable.
Factor out the flag name out of the string returned by short, so that
it can be used in context of 'go test' which can accept a -short flag,
and a test binary which requires the use of a longer -test.short flag.
For #39054.
For #29252.
Change-Id: I52dfbef73cc8307735c52e2ebaa609305fb05933
Reviewed-on: https://go-review.googlesource.com/c/go/+/233898
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When external linking, for large binaries, the external linker
may insert a trampoline for the write barrier call, which looks
0000000005a98cc8 <__long_branch_runtime.gcWriteBarrier>:
5a98cc8: 86 01 82 3d addis r12,r2,390
5a98ccc: d8 bd 8c e9 ld r12,-16936(r12)
5a98cd0: a6 03 89 7d mtctr r12
5a98cd4: 20 04 80 4e bctr
It clobbers R12 (and CTR, which is never live across a call).
As at compile time we don't know whether the binary is big and
what link mode will be used, I think we need to mark R12 as
clobbered for write barrier call. For extra safety (future-proof)
we mark caller-saved register that cannot be used for function
arguments, which includes R11, as potentially clobbered as well.
Fixes#40851.
Change-Id: Iedd901c5072f1127cc59b0a48cfeb4aaec81b519
Reviewed-on: https://go-review.googlesource.com/c/go/+/248917
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This reverts the following changes:
• cmd/go: add tracing for querying and downloading from the proxy
CL 242786, commit 1a35583418
• cmd/go: do context propagation for tracing downloads
CL 248327, commit c0cf190d22
• cmd/go/internal: remove some users of par.Work
CL 248326, commit f30044a03b
Reason for revert: broke linux 386 and amd64 longtest builders.
The problem started with CL 248326, but CL 248327 and CL 242786
are reverted as well due to conflicts.
Updates #38714.
Fixes#40861.
Change-Id: I68496b4e5a27e47a42183553c3a645b288edac83
Reviewed-on: https://go-review.googlesource.com/c/go/+/249017
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Carlos Amedee <carlos@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some of the existing optimizations aren't triggered because they
are handled by the generic rules so this CL removes them. Also
some constraints were copied without much thought from the amd64
rules and they don't make sense on s390x, so we remove those
constraints.
Finally, add a 'multiply by the sum of two powers of two'
optimization. This makes sense on s390x as shifts are low latency
and can also sometimes be optimized further (especially if we add
support for RISBG instructions).
name old time/op new time/op delta
IntMulByConst/3-8 1.70ns ±11% 1.10ns ± 5% -35.26% (p=0.000 n=10+10)
IntMulByConst/5-8 1.64ns ± 7% 1.10ns ± 4% -32.94% (p=0.000 n=10+9)
IntMulByConst/12-8 1.65ns ± 6% 1.20ns ± 4% -27.16% (p=0.000 n=10+9)
IntMulByConst/120-8 1.66ns ± 4% 1.22ns ±13% -26.43% (p=0.000 n=10+10)
IntMulByConst/-120-8 1.65ns ± 7% 1.19ns ± 4% -28.06% (p=0.000 n=9+10)
IntMulByConst/65537-8 0.86ns ± 9% 1.12ns ±12% +30.41% (p=0.000 n=10+10)
IntMulByConst/65538-8 1.65ns ± 5% 1.23ns ± 5% -25.11% (p=0.000 n=10+10)
Change-Id: Ib196e6bff1e97febfd266134d0a2b2a62897989f
Reviewed-on: https://go-review.googlesource.com/c/go/+/248937
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For an unsigned integer, it's useful to convert its order test with 0/1
to its equality test with 0. We can save a comparison instruction that
followed by a conditional branch on arm64 since it supports
compare-with-zero-and-branch instructions. For example,
if x > 0 { ... } else { ... }
the original version:
CMP $0, R0
BLS 9
the optimized version:
CBZ R0, 8
Updates #21439
Change-Id: Id1de6f865f6aa72c5d45b29f7894818857288425
Reviewed-on: https://go-review.googlesource.com/c/go/+/246857
Reviewed-by: Keith Randall <khr@golang.org>
Corrects ErrReader's signature to what was accepted in the approved
proposal, and also removes an exported ErrIO which wasn't part of
the proposal and is unnecessary.
The new signature allows users to customize their own errors.
While here, started examples, with ErrReader leading the way.
Updates #38781
Change-Id: Ia7f84721f11061343cfef8b1adc2b7b69bc3f43c
Reviewed-on: https://go-review.googlesource.com/c/go/+/248898
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If the AND has other uses, we end up saving an argument to the AND
in another register, so we can use it for the TEST. No point in doing that.
Change-Id: I73444a6aeddd6f55e2328ce04d77c3e6cf4a83e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/241280
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I noticed that there is a Todo comment here. This variable is only used for filename when dump a function's ssa passes result in details. It is no problem to print a function alone, but may be edited by not only one goroutine if dump multiple functions at the same time. Although it looks only dump one function's ssa passes now. As far as I am concerned this variable can be a member variable of the struct Func. I'm not sure if this change is necessary. Looking forward to your advices, thank you very much.
Change-Id: I35dd7247889e0cc7f19c0b400b597206592dee75
Reviewed-on: https://go-review.googlesource.com/c/go/+/244918
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
There are some architecture-independent rules in #21439, since an
unsigned integer >= 0 is always true and < 0 is always false. This CL
adds these optimizations to generic rules.
Updates #21439
Change-Id: Iec7e3040b761ecb1e60908f764815fdd9bc62495
Reviewed-on: https://go-review.googlesource.com/c/go/+/246617
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change does context propagation (and only context propagation)
necessary to add context to modfetch.Download and pkg.LoadImport.
This was done by adding context to their callers, and then
adding context to all call-sites, and then repeating adding
context to callers of those enclosing functions and their
callers until none were left. In some cases the call graph expansion
was pruned by using context.TODOs.
The next CL will add a span to Download. I kept it out of this
change to avoid making it any larger (and harder to review)
than it needs to be.
Updates #38714
Change-Id: I5bf2d599aafef67334c384dfccd5e255198c85b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/248327
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
If we are parsing a test output, and the test does not end in the
usual PASS or FAIL line (say, because it panicked), then we need the
exit status of the test binary in order to determine whether the test
passed or failed. If we don't have that status available, we shouldn't
guess arbitrarily — instead, we should omit the final "pass" or "fail"
action entirely.
(In practice, we nearly always DO have the final status, such as when
running 'go test' or 'go tool test2json some.exe'.)
Fixes#40132
Change-Id: Iae482577361a6033395fe4a05d746b980e18c3de
Reviewed-on: https://go-review.googlesource.com/c/go/+/248624
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
par.Work is used in a number of places as a parallel
work queue. This change replaces it with goroutines
and channels in a number of simpler places where it's
used.
Change-Id: I0620eda46ec7b2c0599a8b9361639af7bb73a05a
Reviewed-on: https://go-review.googlesource.com/c/go/+/248326
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This change adds context, and a span to modload.LoadBuildList and
propagates context into modload.BuildList. It's the start
of a run of CLs to add trace spans for module operations.
Updates #38714
Change-Id: I0d58dd394051526338092dc9a5ec29a9e087e4e4
Reviewed-on: https://go-review.googlesource.com/c/go/+/248325
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
These commands are build-like commands that do their own flag
processing, so the value of debug-trace isn't available until
the command starts running. Start tracing in the cmd's run
function.
Updates #38714
Change-Id: I4d633e6ee907bf09feac52c2aff3daceb9b20e12
Reviewed-on: https://go-review.googlesource.com/c/go/+/248324
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This could help make it easier to identify blocking
dependencies when examining traces. Flows can be turned
off when viewing traces to remove potential distractions.
Updates #38714
Change-Id: Ibfd3f1a1861e3cac31addb053a2fca7ee796c4d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/248322
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Action.Func is now a func(*Builder, context.Context, *Action), so that
contexts can be propagated into the action funcs. While context
is traditionally the first parameter of a function, it's the second
parameter of Action.Func's type to continue to allow for methods
on Builder to be used as functions taking a *Builder as the first
parameter. context.Context is instead the first parameter on
those functions.
Change-Id: I5f058d6a99a1e96fe2025f2e8ce30a033d12e935
Reviewed-on: https://go-review.googlesource.com/c/go/+/248321
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This change adds a trace event for each action and also
annotates each of the action execution goroutines with trace.Goroutine
so that the actions eaxecuted by each goroutine appear on different threads in
the chrome trace viewer.
Updates #38714
Change-Id: I2e58dc5606b2e3f7f87076a61e1cc6a2014255c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/248320
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
trace.StartGoroutine will associate the trace information on the context
with a new chrome profiler thread id. The chrome profiler doesn't
expect multiple trace events to have the same thread id, so this
will allow us to display concurrent events on the trace.
Updates #38714
Change-Id: I888b0cce15a5a01db66366716fdd85bf86c832cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/248319
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
On ARM, for a JMP/CALL relocation, the instruction bytes is
encoded in Reloc.Add (issue #19811). I really hate it, but before
it is fixed we have to follow the rule and emit the right bits
from r.Add.
Fixes#40769.
Change-Id: I862e105408d344c5cc58ca9140d2e552e4364453
Reviewed-on: https://go-review.googlesource.com/c/go/+/248399
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
Reviewed-by: Than McIntosh <thanm@google.com>
cgo_import_dynamic pragma indicates a symbol is imported from a
dynamic library. Currently, the linker does not actually link
against the dynamic library, so we have to "force" it by using
//go:cgo_import_dynamic _ _ "dylib"
syntax, which links in the library unconditionally.
This CL changes it to link in the library automatically when a
symbol is imported from the library, without using the "force"
syntax. (The "force" syntax is still supported.)
Remove the unconditional imports in the runtime. Now,
Security.framework and CoreFoundation.framework are only linked
when the x509 package is imported (or otherwise specified).
Fixes#40727.
Change-Id: Ied36b1f621cdcc5dc4a8f497cdf1c554a182d0e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/248333
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, the GC stores the object marks for checkmarks mode in the
heap bitmap using a rather complex encoding: for one word objects, the
checkmark is stored in the pointer/scalar bit since one word objects
must be pointers; for larger objects, the checkmark is stored in what
would be the scan/dead bit for the second word of the object. This
encoding made more sense when the runtime used the first scan/dead bit
as the regular mark bit, but we moved away from that long ago.
This encoding and overloading of the heap bitmap bits causes a great
deal of complexity in many parts of the allocator and garbage
collector and leads to some subtle bugs like #15903.
This CL moves the checkmarks mark bits into their own per-arena bitmap
and reclaims the second scan/dead bit as a regular scan/dead bit.
I tested this by enabling doubleCheck mode in heapBitsSetType and
running in both regular and GODEBUG=gccheckmark=1 mode.
Fixes#15903.
No performance degradation. (Very slight improvement on a few
benchmarks, but it's probably just noise.)
name old time/op new time/op delta
BiogoIgor 16.6s ± 1% 16.4s ± 1% -0.94% (p=0.000 n=25+24)
BiogoKrishna 19.2s ± 3% 19.2s ± 3% ~ (p=0.638 n=23+25)
BleveIndexBatch100 6.12s ± 5% 6.17s ± 4% ~ (p=0.170 n=25+25)
CompileTemplate 206ms ± 1% 205ms ± 1% -0.43% (p=0.005 n=24+24)
CompileUnicode 82.2ms ± 2% 81.5ms ± 2% -0.95% (p=0.001 n=22+22)
CompileGoTypes 755ms ± 3% 754ms ± 4% ~ (p=0.715 n=25+25)
CompileCompiler 3.73s ± 1% 3.73s ± 1% ~ (p=0.445 n=25+24)
CompileSSA 8.67s ± 1% 8.66s ± 1% ~ (p=0.836 n=24+22)
CompileFlate 134ms ± 2% 133ms ± 1% -0.66% (p=0.001 n=24+23)
CompileGoParser 164ms ± 1% 163ms ± 1% -0.85% (p=0.000 n=24+24)
CompileReflect 466ms ± 5% 466ms ± 3% ~ (p=0.863 n=25+25)
CompileTar 182ms ± 1% 182ms ± 1% -0.31% (p=0.048 n=24+24)
CompileXML 249ms ± 1% 248ms ± 1% -0.32% (p=0.031 n=21+25)
CompileStdCmd 10.3s ± 1% 10.3s ± 1% ~ (p=0.459 n=23+23)
FoglemanFauxGLRenderRotateBoat 8.66s ± 1% 8.62s ± 1% -0.47% (p=0.000 n=23+24)
FoglemanPathTraceRenderGopherIter1 20.3s ± 3% 20.2s ± 2% ~ (p=0.893 n=25+25)
GopherLuaKNucleotide 29.7s ± 1% 29.8s ± 2% ~ (p=0.421 n=24+25)
MarkdownRenderXHTML 246ms ± 1% 247ms ± 1% ~ (p=0.558 n=25+24)
Tile38WithinCircle100kmRequest 779µs ± 4% 779µs ± 3% ~ (p=0.954 n=25+25)
Tile38IntersectsCircle100kmRequest 1.02ms ± 3% 1.01ms ± 4% ~ (p=0.658 n=25+25)
Tile38KNearestLimit100Request 984µs ± 4% 986µs ± 4% ~ (p=0.627 n=24+25)
[Geo mean] 552ms 551ms -0.19%
https://perf.golang.org/search?q=upload:20200723.6
Change-Id: Ic703f26a83fb034941dc6f4788fc997d56890dec
Reviewed-on: https://go-review.googlesource.com/c/go/+/244539
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
The heapBitsSetType function has a slow doubleCheck debugging mode
that checks the bitmap written out by the rest of the function using
far more obvious logic. But even this has some surprisingly complex
logic in it. Simplify it a bit. This also happens to fix the logic on
32-bit.
Fixes#40335.
Change-Id: I5cee482ad8adbd01cf5b98e35a270fe941ba4940
Reviewed-on: https://go-review.googlesource.com/c/go/+/244538
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The runtime has its own implementation of string indexing. To reduce
code duplication and cognitive load, replace this with calls to the
internal/bytealg package. We can't do this on Plan 9 because it needs
string indexing in a note handler (which isn't allowed to use the
optimized bytealg version because it uses SSE), so we can't just
eliminate the index function, but this CL does down-scope it so make
it clear it's only for note handlers on Plan 9.
Change-Id: Ie1a142678262048515c481e8c26313b80c5875df
Reviewed-on: https://go-review.googlesource.com/c/go/+/244537
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Since NetBSD 7, hw.ncpuonline reports the number of CPUs online, while
hw.cpu reports the number of CPUs configured. Try hw.cpuonline first and
fall back to hw.ncpu in case it fails (which is the case on NetBSD
before 7.0).
This follows the behavior on OpenBSD (see CL 161757). Also, Go
in pkgsrc is patched to use hw.cpuonline, so this CL would allow said
patch to be dropped.
Updates #30824
Change-Id: Id1c19dff2c1e4401e6074179fae7c708ba0e3098
Reviewed-on: https://go-review.googlesource.com/c/go/+/231957
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>
Instead of returning a bad verb error format for runes above
utf8.Maxrune return a quoted utf8.RuneError rune (\ufffd).
This makes the behaviour consistent with the "c" verb and
aligns behaviour to not return bad verb error format when
a verb is applied to the correct argument type.
Fixes#14569
Change-Id: I679485f6bb90ebe408423ab68af16cce38816cd0
Reviewed-on: https://go-review.googlesource.com/c/go/+/248759
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The two existing benchmarks encode randomized pixels, which isn't very
representative. The two new benchmarks encode a PNG photo as a GIF.
Also rename the benchmarks for consistency.
Also fix the bytes-per-op measure for paletted images, which are 1 (not
4) bytes per pixel.
Also simplify BenchmarkEncodeRandomPaletted (formerly just called
BenchmarkEncode). It doesn't need to generate a random palette (and the
GIF encoder largely doesn't care about the palette's RGBA values).
Use palette.Plan9 instead, a pre-existing 256-element color palette.
Change-Id: I10a6ea4e9590bb0d9f76e8cc0f4a88d43b1d650d
Reviewed-on: https://go-review.googlesource.com/c/go/+/248218
Reviewed-by: David Symonds <dsymonds@golang.org>
There is an optimization rule that removes calls to racefuncenter and
racefuncexit, if there are no other race calls in the function. The
rule removes the call to racefuncenter, but it does *not* remove the
store of its argument to the outargs section of the frame. If the
outargs section is now size 0 (because the calls to racefuncenter/exit
were the only calls), then that argument store clobbers the frame
pointer instead.
The fix is to remove the argument store when removing the call to
racefuncenter. (Racefuncexit doesn't have an argument.)
Change-Id: I183ec4d92bbb4920200e1be27b7b8f66b89a2a0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/248262
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These operations are async unsafe on architectures that use
frame pointers.
The reason is they rely on data being safe when stored below the stack
pointer. They do:
45da69: 48 89 6c 24 f0 mov %rbp,-0x10(%rsp)
45da6e: 48 8d 6c 24 f0 lea -0x10(%rsp),%rbp
45da73: e8 7d d0 ff ff callq 45aaf5 <runtime.duffzero+0x115>
45da78: 48 8b 6d 00 mov 0x0(%rbp),%rbp
This dance ensures that inside duffzero, it looks like there is a
proper frame pointer set up, so that stack walkbacks work correctly if
the kernel samples during duffzero.
However, this instruction sequence depends on data not being clobbered
even though it is below the stack pointer.
If there is an async interrupt at any of those last 3 instructions,
and the interrupt decides to insert a call to asyncPreempt, then the
saved frame pointer on the stack gets clobbered. The last instruction
above then restores junk to the frame pointer.
To prevent this, mark these instructions as async unsafe.
(The body of duffzero is already async unsafe, as it is in package runtime.)
Change-Id: I5562e82f9f5bd2fb543dcf2b6b9133d87ff83032
Reviewed-on: https://go-review.googlesource.com/c/go/+/248261
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The default ctrl+c handler should process exits in situations where it
makes sense, like console apps, but not in situations where it doesn't,
like libraries or services. Therefore, we should remove the exit(2) so
that the default handler is used for this. This also uses the more
proper windows exit code of STATUS_CONTROL_C_EXIT, with the base case
handler installed by KernelBase.dll. In particular, this helps in the
case of services, which previously would terminate when receiving
shutdown signals, instead of passing them onward to the service program.
In this CL, contrary to CL 244959, we do not need to special case
services with expensive detection algorithms, or rely on hard-coded
library/archive flags.
Fixes#40167.
Fixes#40074.
Change-Id: I9bf6ed6f65cefeff754d270aa33fa4df8d0b451f
Reviewed-on: https://go-review.googlesource.com/c/go/+/243597
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Currently, generated struct wrapper for closure is not handled in
mustHeapAlloc. That causes compiler crashes when the wrapper struct
is too large for stack, and must be heap allocated instead.
Fixes#39292
Change-Id: I14c1e591681d9d92317bb2396d6cf5207aa93e08
Reviewed-on: https://go-review.googlesource.com/c/go/+/244917
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 230121 fixed the bug that struct literal blank fields type array/struct
can not be initialized. But it still misses some cases when an expression
causes "candiscard(value)" return false. When these happen, we recursively
call fixedlit with "var_" set to "_", and hit the bug again.
To fix it, just making splitnode return "nblank" whenever "var_" is "nblank".
Fixes#38905
Change-Id: I281941b388acbd551a4d8ca1a235477f8d26fb6e
Reviewed-on: https://go-review.googlesource.com/c/go/+/232617
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Simplifying some code without compromising performance.
My CPU is Intel Xeon Gold 6161, 2.20GHz, 64-bit operating system.
The memory is 8GB. This is my test environment, I hope to help you judge.
Benchmark:
name old time/op new time/op delta
Log1p-4 21.8ns ± 5% 21.8ns ± 4% ~ (p=0.973 n=20+20)
Change-Id: Icd8f96f1325b00007602d114300b92d4c57de409
Reviewed-on: https://go-review.googlesource.com/c/go/+/233940
Reviewed-by: Robert Griesemer <gri@golang.org>
If the timeout triggers before writing to the done channel, the
goroutine will be blocked waiting for a corresponding read that’s
no longer existent, thus a goroutine leak. This change fixes that by
using a buffered channel instead.
Change-Id: I9cf4067a58bc5a729ab31e4426edd78bd359e8e0
GitHub-Last-Rev: a7d811a7be
GitHub-Pull-Request: golang/go#40236
Reviewed-on: https://go-review.googlesource.com/c/go/+/242902
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds parentheses so as to properly bind <- to the right most
channel.
This meant that previously given:
ChanOf(<-chan T)
it would mistakenly try to look up the type as
chan <-chan T
instead of
chan (<-chan T)
Fixes#39897
Change-Id: I8564916055f5fadde3382e41fe8820a1071e5f13
GitHub-Last-Rev: f8f2abe8d4
GitHub-Pull-Request: golang/go#39898
Reviewed-on: https://go-review.googlesource.com/c/go/+/240280
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Taking the live variable set from the last return point is problematic.
See #40629 for details, but there may not be a return point, or it may
be before the final defer.
Additionally, keeping track of the last call as a *Value doesn't quite
work. If it is dead-code eliminated, the storage for the Value is reused
for some other random instruction. Its live variable information,
if it is available at all, is wrong.
Instead, just mark all the open-defer argument slots as live
throughout the function. (They are already zero-initialized.)
Fixes#40629
Change-Id: Ie456c7db3082d0de57eaa5234a0f32525a1cce13
Reviewed-on: https://go-review.googlesource.com/c/go/+/247522
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
modload.Init initialized the build cache with the intent of providing
a better error message in Go 1.12, when the build cache became
mandatory (in module mode, packages aren't installed outside the build
cache). Unfortunately, this didn't provide a more descriptive error
(the cache calls base.Fatalf with its own message), and it caused
errors for commands that don't use the cache (like 'go mod edit').
This CL removes the cache initialization from modload.Init. The
builder will initialize it when it's needed.
For #39882
Change-Id: Ibc01ae4e59358dcd08a07ffc97bf556514d0366f
Reviewed-on: https://go-review.googlesource.com/c/go/+/240548
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
In CL 239797, str.GlobsMatchPath was copied to golang.org/x/mod/module
as MatchPrefixPatterns. This CL updates x/mod, switches calls to use
the new function, and deletes the old function.
For #38725
Change-Id: I7241032228b574aa539426a92d2f5aad9ee001e2
Reviewed-on: https://go-review.googlesource.com/c/go/+/240061
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
modfetch.WriteGoSum now accepts a map[module.Version]bool parameter.
This is used to prevent some new sums from being saved to go.sum when
they would be removed by the next 'go mod tidy'. Previusly, sums were
saved for modules looked up during import resolution.
A new function, modload.TrimGoSum, is also introduced, which marks
sums for deletion. 'go mod tidy' now uses this. The new logic
distinguishes between go.mod sums and content sums, which lets 'go mod
tidy' delete sums for modules in the build graph but not the build
list.
Fixes#31580Fixes#36260Fixes#33008
Change-Id: I06c4125704a8bbc9969de05265967ec1d2e6d3e8
Reviewed-on: https://go-review.googlesource.com/c/go/+/237017
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The Builder isn't needed by MkEnv, and Builder.Init doesn't have side
effects that change the environment. Builder.Init does currently call
CheckGOOSARCHPair, but that's being moved out in CL 234658.
Builder.Init creates the temporary work directory used by the
builder. For the builder created in MkEnv, this directory is never
used. Creating this directory can cause unnecessary errors for
commands that don't use a builder like 'go clean' and 'go list'.
Fixes#38395
Updates #24398
Change-Id: Ib93ae55afdf958000470657f4c4ff5bd92700e46
Reviewed-on: https://go-review.googlesource.com/c/go/+/236563
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The prior implementation used the format verb %v which unfortunately
improperly wrapped any underlying scanner errors, and we couldn't use
errors.Is nor errors.As. This change fixes that by using the %w verb.
Added a unit to ensure that both error sub string matching works, but
also that errors.Is works as expected.
Fixes#38099
Change-Id: Iea667041dd8081d961246f77f2542330417292dc
Reviewed-on: https://go-review.googlesource.com/c/go/+/248337
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Daniel Theophanes <kardianos@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The optimization that replaces inline markers with pre-existing
instructions assumes that 'Prog' values produced by the compiler are
still reachable after the assembler has run. This was not true on
s390x where the assembler was removing NOP instructions from the
linked list of 'Prog' values. This led to broken inlining data
which in turn caused an infinite loop in the runtime traceback code.
Fix this by stopping the s390x assembler backend removing NOP
values. It does not make any difference to the output of the
assembler because NOP instructions are 0 bytes long anyway.
Fixes#40473.
Change-Id: Ib4fabadd1de8adb80421f75950ee9aad2111147a
Reviewed-on: https://go-review.googlesource.com/c/go/+/247697
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Previously, the assembler removed NOPs from the Prog list in
obj9.go. NOPs shouldn't be removed if they were added as
an inline mark, as described in the issue below.
Fixes#40689
Once the NOPs were left in the Prog list, some instructions
were flagged as invalid because they had an operand which was
not represented in optab. In order to preserve the previous
assembler behavior, entries were added to optab for those
operand cases. They were not flagged as errors before because
the NOP instructions were removed before the code to check the
valid opcode/operand combinations.
Change-Id: Iae5145f94459027cf458e914d7c5d6089807ccf8
Reviewed-on: https://go-review.googlesource.com/c/go/+/247842
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Paul Murphy <murp@ibm.com>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Reviewed-by: Keith Randall <khr@golang.org>
Minor cleanup: remove the symbol attribute AttrSeenGlobal, since it is
redundant with the existing attribute AttrOnList (no need to have what
amounts to a separate flag for checking the same property).
Change-Id: Ia269b64de37c2bb4a2314bbecf3d2091c6d57424
Reviewed-on: https://go-review.googlesource.com/c/go/+/239477
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add a draft version of a blurb on improvements to the linker. This
will need to be finalized later in the release since there are still
some additional changes to be made to the linker in 1.16.
Updates #40703.
Change-Id: Id85c7e129071cc2faacb09c53a2968bd52b0a7b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/248238
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Go 1.14 included a (rather awful) workaround for a Linux kernel bug
that corrupted vector registers on x86 CPUs during signal delivery
(https://bugzilla.kernel.org/show_bug.cgi?id=205663). This bug was
introduced in Linux 5.2 and fixed in 5.3.15, 5.4.2 and all 5.5 and
later kernels. The fix was also back-ported by major distros. This
workaround was necessary, but had unfortunate downsides, including
causing Go programs to exceed the mlock ulimit in many configurations
(#37436).
We're reasonably confident that by the Go 1.16 release, the number of
systems running affected kernels will be vanishingly small. Hence,
this CL removes this workaround.
This effectively reverts CLs 209597 (version parser), 209899 (mlock
top of signal stack), 210299 (better failure message), 223121 (soft
mlock failure handling), and 244059 (special-case patched Ubuntu
kernels). The one thing we keep is the osArchInit function. It's empty
everywhere now, but is a reasonable hook to have.
Updates #35326, #35777 (the original register corruption bugs).
Updates #40184 (request to revert in 1.15).
Fixes#35979.
Change-Id: Ie213270837095576f1f3ef46bf3de187dc486c50
Reviewed-on: https://go-review.googlesource.com/c/go/+/246200
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In Go 1.15 we switched the default linking mode for PIE on
Linux/AMD64 and Linux/ARM64 to internal linking. Clarify that
the previous behavior (external linking) can still be used with
a flag.
Fixes#40719.
Change-Id: Ib7042622bc91e1b1aa31f520990d03b5eb6c56bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/248199
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In the dev.link branch we have continued developing the new object
file format support and the linker improvements described in
https://golang.org/s/better-linker . Since the last merge (May 1st
2020), more progress has been made to improve the new linker, with
improvements on both linker speed and memory usage.
Fixes#40703.
Change-Id: I9924ea88d981845c3a40ec8c25820120fc21c003
This change propagates context into PackagesForErrors and Do for
the purpose of tracing, and calls trace.StartSpan on PackagesForErrors
and Do, so that the trace now shows the broad outline of where
the "Loading" and "Execution" phases are in the build.
Updates #38714
Change-Id: Ib9a7cf7030210f68f76663d1c8a7461e0a226611
Reviewed-on: https://go-review.googlesource.com/c/go/+/238541
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The ViewerEvent, ViewerData and ViewerFrame structs are moved into
cmd/internal/traceviewer, and renamed Event, Data, and Frame.
The structs are the same, except for the following: A definition
for the JSON "bp" field that's defined in the trace format, but
missing in the structs has been added. Also, the Tid and Pid fields
on Event have been renamed TID and PID to better match Go style.
Finally, the footer field on ViewerData, which hasn't been used
for a while, has been removed.
This CL is in preparation for the usage of these structs by cmd/go's
tracing functionality.
Updates #38714
Change-Id: I345f23617b96d4629b876ae717f89d56a67e05a3
Reviewed-on: https://go-review.googlesource.com/c/go/+/239098
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This template is based on CL 220278 and previous ones like it.
Include Compiler and Linker sections proactively, they can be
removed if they don't end up being needed for Go 1.16.
Use two spaces of indentation for TODOs to set a better precedent
for the final text that will take its place.
'relnote -html' does not report any changes at this time.
For #40700.
Change-Id: I096b0ce0d33aaaa6fae9c91c0d2dfb89b9c5e94c
Reviewed-on: https://go-review.googlesource.com/c/go/+/248198
Reviewed-by: Carlos Amedee <carlos@golang.org>
This is the start of the Go 1.16 development cycle, so update the
Version value accordingly. It represents the Go 1.x version that
will soon open up for development (and eventually become released).
Historically, we used to bump this at an arbitrary time throughout
the development cycle, but it's better to be more predictable about
updating it. The start of a development cycle should be the most
appropriate time: it clearly marks the boundary between 1.15 and
1.16 development, and doing it early can help catch issues in other
tooling. See issue #38704 for more background.
There is no longer a need to update the list of Go versions in
src/go/build/doc.go because it does not exist as of CL 232981.
For #40705.
Updates #38704.
Updates #37018.
Change-Id: Id8ee733b5e79c53b6cd03509c6560614d8743833
Reviewed-on: https://go-review.googlesource.com/c/go/+/248038
Reviewed-by: Carlos Amedee <carlos@golang.org>
CL 245485 introduced a map for used files in a function. When
numbering symbols, make sure we traverse the files in
deterministic order.
Should fix longtest builders.
Change-Id: I1006bc5425116ab40e33a61e8f5acd1bdb4abad9
Reviewed-on: https://go-review.googlesource.com/c/go/+/247997
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Read Go object files using cmd/internal/goobj2 package directly,
instead of using cmd/internal/goobj as an intermediate layer.
Now cmd/internal/archive is only about reading archives.
Change-Id: Ifecb217fb26c16c26fc1bbc3fba0ed44710020ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/246443
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Rename cmd/internal/goobj package to cmd/internal/archive. This
is in preparation of a refactoring of object and archive file
reading packages.
With this CL, the cmd/internal/archive contains logic about
reading Go object files. This will be moved to other places in
later CLs.
Change-Id: Ided7287492a4766183d6e49be840a7f361504d1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/246442
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
This update was created using the updatecontrib command:
go get golang.org/x/build/cmd/updatecontrib
cd gotip
updatecontrib
With manual changes based on publicly available information
to canonicalize letter case and formatting for a few names.
For #12042.
Change-Id: I66dc5ee28d9a64bc9d150e72d136d8f71e50373b
Reviewed-on: https://go-review.googlesource.com/c/go/+/247767
Reviewed-by: Carlos Amedee <carlos@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Currently, nanotime1 (and walltime1) is not reentrant, in that it
sets m.vdsoSP at entry and clears it at exit. If a signal lands
in between, and nanotime1 is called from the signal handler, it
will clear m.vdsoSP while we are still in nanotime1. If (in the
unlikely event) it is signaled again, m.vdsoSP will be wrong,
which may cause the stack unwinding code to crash.
This CL makes it reentrant, by saving/restoring the previous
vdsoPC and vdsoSP, instead of setting it to 0 at exit.
TODO: have some way to test?
Change-Id: I9ee53b251f1d8a5a489c71d4b4c0df1dee70c3e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/246763
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In order to prevent renumbering of filenames in pclntab generation, use
the per-package file list (previously only used for DWARF generation) as
file-indices. This is the largest step to eliminate renumbering of
filenames in pclntab.
Note, this is probably not the final state of the file table within the
object file. In this form, the linker loads all filenames for all
objects. I'll move to storing the filenames as regular string
symbols,and defaulting all string symbols to using the larger hash value
to make generation of pcln simplest, and most memory friendly.
Change-Id: I23daafa3f4b4535076e23100200ae0e7163aafe0
Reviewed-on: https://go-review.googlesource.com/c/go/+/245485
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Add a new PPC64-only linker test that does a build with the
-debugppc64textsize debugging option (selecting a lower the threshold
for text section splitting) to verify that no bugs have been
introduced in the linker code that manages this process.
Change-Id: Iea3f16a04c894d528eab2cb52f1ec1d75a2770cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/241499
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Add a new debugging command line option (-debugppc64textsize=N) that
forces the start of a new text section after ".text" hits N bytes as
opposed to the architected limit of 2^26. This is intended to enable
testing of the linker code paths that handle multiple .text sections
on PPC64 without resorting to building giant applications.
Updates #20492.
Change-Id: I74ab7fd1e412e9124de5bd0d8d248c5e73225ae3
Reviewed-on: https://go-review.googlesource.com/c/go/+/241073
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The code in the the linker's genelfsym() routine was not properly
including runtime.text.%d marker symbols that are emitted on PPC64
when a very large text section is split into chunks. This bug was
introduced in CL 233338 when portions of asmb2() were converted
from sym.Symbol to loader.Sym usage.
Change-Id: Idfed944c41e1805f78f35be67bcdd18bdefd7819
Reviewed-on: https://go-review.googlesource.com/c/go/+/241498
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
This CL ensures that ReadUvarint consumes only a limited
amount of input (instead of an unbounded amount).
On some inputs, ReadUvarint could read an arbitrary number
of bytes before deciding to return an overflow error.
After this CL, ReadUvarint returns that same overflow
error sooner, after reading at most MaxVarintLen64 bytes.
Fix authored by Robert Griesemer and Filippo Valsorda.
Thanks to Diederik Loerakker, Jonny Rhea, Raúl Kripalani,
and Preston Van Loon for reporting this.
Fixes#40618
Fixes CVE-2020-16845
Change-Id: Ie0cb15972f14c38b7cf7af84c45c4ce54909bb8f
Reviewed-on: https://team-review.git.corp.google.com/c/golang/go-private/+/812099
Reviewed-by: Filippo Valsorda <valsorda@google.com>
Reviewed-on: https://go-review.googlesource.com/c/go/+/247120
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
After golang.org/cl/228784 setLoadPackageDataError tries to decide whether an
error is caused by an imported package or an importing package by examining the
error itself to decide. Ideally, the errors themselves would belong to a
specific interface or some other property to make it unambiguous that they
were import errors. Since they don't, setLoadPackageDataError just checked
for nogoerrors and classified all other errors as import errors. But
it missed scanner errors which are also "caused" by the imported
package.
Fixes#40544
Change-Id: I39159bfdc286bee73697decd07b8aa9451f2db06
Reviewed-on: https://go-review.googlesource.com/c/go/+/246717
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Use the original *Request in the reqCanceler map, not the transient
wrapper created to handle body rewinding.
Change the key of reqCanceler to a struct{*Request}, to make it more
difficult to accidentally use the wrong request as the key.
Fixes#40453.
Change-Id: I4e61ee9ff2c794fb4c920a3a66c9a0458693d757
Reviewed-on: https://go-review.googlesource.com/c/go/+/245357
Run-TryBot: Damien Neil <dneil@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
On AIX, container symbols are handled in a weird way (unlike
other platforms): the outer symbol needs to have size (but still
no data), and the inner symbols must not be in the symbol table
(otherwise it overlaps with the outer symbol, which the system
linker doesn't like).
As of CL 241598, pclntab becomes a container symbol. We need to
follow the rule above for AIX.
Fix AIX build.
Change-Id: Ie2515a4cabbd8cf3f6d3868643a28f64ca3365a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/246479
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Currently, at compile time, for each itab symbol, we create an
"itablink" symbol which holds solely the address of the itab
symbol. At link time, all the itablink symbols are grouped
together to form the itablinks slice.
This CL removes the itablink symbols, and directly generate the
itablinks slice in the linker. This removes a number of symbols,
which are dupOK and generally have long names. And also removes
a special handling of itablink symbols in the deadcode pass which
iterates through all symbols.
Change-Id: I475c3c8899e9fbeec9abc7647b1e4a69aa5c3c5a
Reviewed-on: https://go-review.googlesource.com/c/go/+/245901
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The hash maps are used to deduplicate hashed symbols. Once we
loaded all the symbols, we no longer need the hash maps. Drop
them.
Linking cmd/compile,
name old live-B new live-B delta
Loadlib_GC 13.1M ± 0% 11.3M ± 0% -13.62% (p=0.008 n=5+5)
Change-Id: I4bb1f84e1111a56d9e777cd6a68f7d974b60e321
Reviewed-on: https://go-review.googlesource.com/c/go/+/245721
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Extend the content-addressable symbol mechanism to itab symbols.
Itab symbols require global uniqueness (as at run time we compare
pointers), so it needs to be reliably deduplicated. Currently the
content hash depends on symbol name expansion, so we can only do
this when all Go packages are built with know package paths. Fall
back to checking names if any Go package is built with unknown
package path.
Change-Id: Icf5e8873755050c20e5fc6549f6de1c883254c89
Reviewed-on: https://go-review.googlesource.com/c/go/+/245719
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The type descriptor symbol of a defined (named) type (and pointer
to it) is defined only in the package that defines the type. It
is not dupOK, unlike other type descriptors. So it can be
referenced by index. Currently it is referenced by name for
cross-package references, because the index is not exported and
so not known to the referencing package.
This CL passes the index through the export data, so the symbol
can be referenced by index, and does not need to be looked up by
name. This also makes such symbol references consistent: it is
referenced by index within the defining package and also cross-
package, which makes it easier for content hashing (in later CLs).
One complication is that we need to set flags on referenced
symbols (specifically, the UsedInIface flag). Before, they are
non-package refs, which naturally carry flags in the object file.
For indexed refs, we currently don't put their flags in the
object file. Introduce a new block for this.
Change-Id: I8126f8e318ac4e6609eb2ac136201fd6c264c256
Reviewed-on: https://go-review.googlesource.com/c/go/+/245718
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Leaving creation of the funcID till the linker requires the linker to
load the function and file names into memory. Moving these into the
compiler/assembler prevents this.
This work is a step towards moving all func metadata into the compiler.
Change-Id: Iebffdc5a909adbd03ac263fde3f4c3d492fb1eac
Reviewed-on: https://go-review.googlesource.com/c/go/+/244024
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
The .syso test also fails for ppc64le. Not sure why. For now, just
disable the test for that architecture. The test really only needs to
run on a single builder of any arch.
Change-Id: I346cdc01ada09d43c4c504fbc30be806f59d5422
Reviewed-on: https://go-review.googlesource.com/c/go/+/246358
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For dupOK symbols, their attributes should be OR'd. Most of the
attributes are expected to be set consistently across multiple
definitions, but UsedInIface must be OR'd, and for alignment we
need to pick the largest one. Currently the attributes are not
always OR'd, depending on addSym returning true or false. This
doesn't cause any real problem, but it would be a problem if we
make type descriptor symbols content-addressable.
This CL removes the second result of addSym, and lets preloadSyms
always set the attributes. Also removes the alignment handling on
addSym, handles it in preloadSyms only.
Change-Id: I06b3f0adb733f6681956ea9ef54736baa86ae7bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/245720
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Consider this test package:
package p
// enum E { E0 };
// union U { long x; };
// void f(enum E e, union U* up) {}
import "C"
func f() {
C.f(C.enum_E(C.E0), (*C.union_U)(nil))
}
In Go 1.14, cgo translated this to (omitting irrelevant details):
type _Ctype_union_U [8]byte
func f() {
_Cfunc_f(uint32(_Ciconst_E0), (*[8]byte)(nil))
}
func _Cfunc_f(p0 uint32, p1 *[8]byte) (r1 _Ctype_void) { ... }
Notably, _Ctype_union_U was declared as a defined type, but uses were
being rewritten into uses of the underlying type, which matched how
_Cfunc_f was declared.
After CL 230037, cgo started consistently rewriting "C.foo" type
expressions as "_Ctype_foo", which caused it to start emitting:
type _Ctype_enum_E uint32
type _Ctype_union_U [8]byte
func f() {
_Cfunc_f(_Ctype_enum_E(_Ciconst_E0), (*_Ctype_union_U)(nil))
}
// _Cfunc_f unchanged
Of course, this fails to type-check because _Ctype_enum_E and
_Ctype_union_U are defined types.
This CL changes cgo to emit:
type _Ctype_enum_E = uint32
type _Ctype_union_U = [8]byte
// f unchanged since CL 230037
// _Cfunc_f still unchanged
It would probably be better to fix this in (*typeConv).loadType so
that cgo generated code uses the _Ctype_foo aliases too. But as it
wouldn't have any effect on actual compilation, it's not worth the
risk of touching it at this point in the release cycle.
Updates #39537.
Fixes#40494.
Change-Id: I88269660b40aeda80a9a9433777601a781b48ac0
Reviewed-on: https://go-review.googlesource.com/c/go/+/246057
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently pageAlloc.find attempts to find a better estimate for the
first free page in the heap, even if the space its looking for isn't
necessarily going to be the first free page in the heap (e.g. if npages
>= 2). However, in doing so it has the potential to return a searchAddr
candidate that doesn't actually correspond to mapped memory, but this
candidate might still be adopted. As a result, pageAlloc.alloc's fast
path may look at unmapped summary memory and segfault. This case is rare
on most operating systems since the heap is kept fairly contiguous, so
the chance that the candidate searchAddr discovered is unmapped is
fairly low. Even so, this is totally possible and outside the user's
control when it happens (in fact, it's likely to happen consistently for
a given user on a given system).
Fix this problem by ensuring that our candidate always points to mapped
memory. We do this by looking at mheap's arenas structure first. If it
turns out our candidate doesn't correspond to mapped memory, then we
look at inUse to round up the searchAddr to the next mapped address.
While we're here, clean up some documentation related to searchAddr.
Fixes#40191.
Change-Id: I759efec78987e4a8fde466ae45aabbaa3d9d4214
Reviewed-on: https://go-review.googlesource.com/c/go/+/242680
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We're reworking pclntab generation in the linker, and with that we're
moving FuncID generation in to the compiler. Determining the FuncID is
done by a lookup on the package.function name; therefore, we need the
package whenever we make the TEXT symbols.
Change-Id: I805445ffbf2f895f06ce3a91fb09126d012bf86e
Reviewed-on: https://go-review.googlesource.com/c/go/+/245318
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Move the function names out of runtime.pclntab_old, creating
runtime.funcnametab. There is an unfortunate artifact in this change in
that calculating the funcID still requires loading the name. Future work
will likely pull this out and put it into the object file Funcs.
ls -l cmd/compile (darwin):
before: 18524016
after: 18519952
The difference in size can be attributed to alignment in pclntab_old.
Change-Id: Ibcbb230d4632178f8fcd0667165f5335786381f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/243223
Reviewed-by: Austin Clements <austin@google.com>
Non functional change.
As runtime.pclntab breaks up, it'll be easier if we can just pass around
the pclntab state. Also, eliminate the globals in pclntab.
Change-Id: I2a5849e8f5f422a336a881e53a261e3997d11c44
Reviewed-on: https://go-review.googlesource.com/c/go/+/242599
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
As of July 2020, a fair amount of the new linker's live memory, and
runtime is spent generating pclntab. In an effort to streamline that
code, this change starts breaking up the generation of runtime.pclntab
into smaller chunks that can run later in a link. These changes are
described in an (as yet not widely distributed) document that lays out
an improved format. Largely the work consists of breaking up
runtime.pclntab into smaller pieces, stopping much of the data
rewriting, and getting runtime.pclntab into a form where we can reason
about its size and look to shrink it. This change is the first part of
that work -- just pulling out the header, and demonstrating where a
majority of that work will be.
Change-Id: I65618d0d0c780f7e5977c9df4abdbd1696fedfcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/241598
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
The symbol's data in the object file (sym.P) may already not
contain trailing zeros (e,g, for [10]int{1}), but sometimes it
does (e.g. for [10]int{1,0}). The linker can already handle this
case. We just always trim the trailing zeros for content hashing,
so it can deduplicate [10]int{1} and [10]int{1,0}.
Note: in theory we could just trim the zeros in the symbol data
as well. But currently the linker depends on reading symbol data
for certain symbols (e.g. type symbol decoding), and trimming
will complicates things in the linker.
Change-Id: I9e90e41e6ac808b36855b0713a85e61c33bf093a
Reviewed-on: https://go-review.googlesource.com/c/go/+/245717
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Currently in addLocalInductiveFacts, we only check whether
direct edge from if block to phi block exists. If not, the
following logic will treat the phi block as the first successor,
which is wrong.
This patch makes prove pass more conservative, so we disable
some cases in test/prove.go. We will do some optimization in
the following CL and enable these cases then.
Fixes#40367.
Change-Id: I27cf0248f3a82312a6f7dabe11c79a1a34cf5412
Reviewed-on: https://go-review.googlesource.com/c/go/+/244579
Reviewed-by: Zach Jones <zachj1@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We have Reloc and Reloc2. Reloc2 is the better approach and most
code uses Reloc2. There are still uses of Reloc. This CL migrates
them to Reloc2, and removes Reloc.
Change-Id: Id5f6a6019e1e044add682d05e70ebb1548ec58d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/245577
Reviewed-by: Jeremy Faller <jeremy@golang.org>
We used to generate all external relocations in memory, then emit
the relocation records at a later pass. The data structures were
chosen so that it takes as little memory as possible. Now we just
stream out external relocations, and ExtReloc is just a local
variable. Change the data structure to avoid repeated read of
some fields. Also get rid of ExtRelocView, as it is no longer
necessary.
Change-Id: I40209bbe4387af231b29788125c3b4ebb0ff4a33
Reviewed-on: https://go-review.googlesource.com/c/go/+/245479
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
This reverts CL 202578 and CL 230677 which added an optimization
to use KDSA when available on s390x.
Inconsistencies have been found between the two implementations
in their handling of certain edge cases. Since the Go 1.15 release
is extremely soon it seems prudent to remove this optimization
for now and revisit it in a future release.
Fixes#40475.
Change-Id: Ifb2ed9b9e573784df57383671f1c29d8abae90d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/245497
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ruixin(Peter) Bao <ruixin.bao@ibm.com>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
We accidentally passed the address of a local to a function
pointer, where we should pass the address of a global.
Linking cmd/compile with external linking:
Asmb2_GC 32.5ms ± 5% 21.6ms ± 3% -33.57% (p=0.016 n=5+4)
Asmb2_GC 29.2MB ± 0% 6.4MB ± 0% -78.20% (p=0.008 n=5+5)
Asmb2_GC 1.43M ± 0% 0.00M ± 4% -99.98% (p=0.008 n=5+5)
Change-Id: I4754189bcc20f824627d95858ba35285d53c614d
Reviewed-on: https://go-review.googlesource.com/c/go/+/245337
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
If no M is available, startm first grabs an idle P, then drops
sched.lock and calls newm to start a new M to run than P.
Unfortunately, that leaves a window in which a G (e.g., returning from a
syscall) may find no idle P, add to the global runq, and then in stopm
discover that there are no running M's, a condition that should be
impossible with runnable G's.
To avoid this condition, we pre-allocate the new M ID in startm before
dropping sched.lock. This ensures that checkdead will see the M as
running, and since that new M must eventually run the scheduler, it will
handle any pending work as necessary.
Outside of startm, most other calls to newm/allocm don't have a P at
all. The only exception is startTheWorldWithSema, which always has an M
if there is 1 P (i.e., the currently running M), and if there is >1 P
the findrunnable spinning dance ensures the problem never occurs.
This has been tested with strategically placed sleeps in the runtime to
help induce the correct race ordering, but the timing on this is too
narrow for a test that can be checked in.
Fixes#40368
Change-Id: If5e0293a430cc85154b7ed55bc6dadf9b340abe2
Reviewed-on: https://go-review.googlesource.com/c/go/+/245018
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
During the transitioning period, we mark symbols from Go shared
libraries reachable unconditionally. That might be useful when
there was still a large portion of the linker using sym.Symbols,
and only reachable symbols were converted to sym.Symbols. Marking
them reachable brings them to the dynamic symbol table, even if
they are not needed, increased the binary size unexpectedly.
That time has passed. Now we largely operate on loader symbols,
and it is not needed to mark them reachable anymore.
Fixes#40416.
Change-Id: I1e2bdb93a960ba7dc96575fabe15af93d8e95329
Reviewed-on: https://go-review.googlesource.com/c/go/+/244839
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Do them in the same CL so ARM's archreloc doesn't need to support
both streaming and non-streaming.
TODO: we haven't switched to using mmap to emit external
relocations on Windows.
Change-Id: Ica2ee89c03fc74839efd6b9e26c80585fcdce45c
Reviewed-on: https://go-review.googlesource.com/c/go/+/244357
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
OutData was used for a symbol to point to its data in the output
buffer, in order to apply relocations. Now we fold relocation
application to Asmb next to symbol data writing. We can just pass
the output data as a local variable.
Linking cmd/compile,
name old time/op new time/op delta
Asmb_GC 19.0ms ±10% 16.6ms ± 9% -12.50% (p=0.032 n=5+5)
name old alloc/op new alloc/op delta
Asmb_GC 3.78MB ± 0% 0.14MB ± 1% -96.41% (p=0.008 n=5+5)
name old live-B new live-B delta
Asmb_GC 27.5M ± 0% 23.9M ± 0% -13.24% (p=0.008 n=5+5)
Change-Id: Id870a10dce2a0a7447a05029c6d0ab39b47d0a12
Reviewed-on: https://go-review.googlesource.com/c/go/+/244017
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Support streaming external relocations on ARM64. Support
architecture-specific relocations.
Also support streaming external relocations on Darwin. Do it in
the same CL so ARM64's archreloc doesn't need to support both
streaming and non-streaming.
Change-Id: Ia7fee9957892f98c065022c69a51f47402f4d6e2
Reviewed-on: https://go-review.googlesource.com/c/go/+/243644
Reviewed-by: Jeremy Faller <jeremy@golang.org>
For content-addressable symbols, we build its content hash based
on the symbol data and relocations. When the compiler builds the
symbol data, it may not always include the trailing zeros, e.g.
the data of [10]int64{1,2,3} is only the first 24 bytes.
Therefore, we may end up with symbols with the same contents
(thus same hash) but different sizes. This is not actually a hash
collision. In this case, we can deduplicate them and keep the one
with the larger size.
Change-Id: If6834542d7914cc00f917d7db151955e5aee6f30
Reviewed-on: https://go-review.googlesource.com/c/go/+/243718
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
For content-addressable symbols with relocations, we build a
content hash based on its content and relocations. Depending on
the category of the referenced symbol, we choose different hash
algorithms such that the hash is globally consistent.
For now, we only support content-addressable symbols with
relocations when the current package's import path is known, so
that the symbol names are fully expanded. Otherwise, if the
referenced symbol is a named symbol whose name is not fully
expanded, the hash won't be globally consistent, and can cause
erroneous collisions. This is fine for now, as the deduplication
is just an optimization, not a requirement for correctness (until
we get to type descriptors).
Change-Id: I639e4e03dd749b5d71f0a55c2525926575b1ac30
Reviewed-on: https://go-review.googlesource.com/c/go/+/243142
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
For now, we only do this for symbols without relocations.
Mark static temps "local", as they are not referenced across DSO
boundaries. And deduplicating a local symbol and a non-local
symbol can be problematic.
Change-Id: I0a3dc4138aaeea7fd4f326998f32ab6305da8e4b
Reviewed-on: https://go-review.googlesource.com/c/go/+/243141
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The StdFormat flag was added as part of CL 231461, where the primary aim
was to fix the bug #37476. It's expected that the existing printer modes
only adjust spacing but do not change any of the code text itself. A new
printing flag served as a way for cmd/gofmt and go/format to delegate
a part of formatting work to the printer—where it's more more convenient
and efficient to perform—while maintaining current low-level printing
behavior of go/printer unmodified.
We already have cmd/gofmt and the go/format API that implement standard
formatting of Go source code, so there isn't a need to expose StdFormat
flag to the world, as it can only cause confusion.
Consider that to format source in canonical gofmt style completely it
may require tasks A, B, C to be done. In one version of Go, the printer
may do both A and B, while cmd/gofmt and go/format will do the remaining
task C. In another version, the printer may take on doing just A, while
cmd/gofmt and go/format will perform B and C. This makes it hard to add
a gofmt-like mode to the printer without compromising on above fluidity.
This change prefers to shift back some complexity to the implementation
of the standard library, allowing us to avoid creating the new exported
printing flag just for the internal needs of gofmt and go/format today.
We may still want to re-think the API and consider if something better
should be added, but unfortunately there isn't time for Go 1.15. We are
not adding new APIs now, so we can defer this decision until Go 1.16 or
later, when there is more time.
For #37476.
For #37453.
For #39489.
For #37419.
Change-Id: I0bb07156dca852b043487099dcf05c5350b29e20
Reviewed-on: https://go-review.googlesource.com/c/go/+/240683
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
While investigating #34121, fixed by CL 193605,
I discovered another case where Reset was not quite
resetting enough.
This specific case is not a problem in Reset itself but
rather that the Huffman bit writer in one code path
is using uninitialized memory left over from a previous
block, making the compression not choose the optimal
compression method.
Fixes#34121.
Change-Id: I29245b28214d924e382f91e2c56b4b8a9b7da13d
Reviewed-on: https://go-review.googlesource.com/c/go/+/243140
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Currently, when external linking, in relocsym (in asmb pass), we
convert Go relocations to an in-memory representation of external
relocations, and then in asmb2 pass we write them out to the
output file. This is not memory efficient.
This CL makes it not do the conversion but directly stream out
the external relocations based on Go relocations. Currently only
do this on AMD64 ELF systems.
This reduces memory usage, but makes the asmb2 pass a little
slower.
Linking cmd/compile with external linking:
name old time/op new time/op delta
Asmb_GC 83.8ms ± 7% 70.4ms ± 4% -16.03% (p=0.008 n=5+5)
Asmb2_GC 95.6ms ± 4% 118.2ms ± 5% +23.65% (p=0.008 n=5+5)
TotalTime_GC 1.59s ± 2% 1.62s ± 1% ~ (p=0.151 n=5+5)
name old alloc/op new alloc/op delta
Asmb_GC 26.0MB ± 0% 4.1MB ± 0% -84.15% (p=0.008 n=5+5)
Asmb2_GC 8.19MB ± 0% 8.18MB ± 0% ~ (p=0.222 n=5+5)
name old live-B new live-B delta
Asmb_GC 49.2M ± 0% 27.4M ± 0% -44.38% (p=0.008 n=5+5)
Asmb2_GC 51.5M ± 0% 29.7M ± 0% -42.33% (p=0.008 n=5+5)
TODO: figure out what is slow. Possible improvements:
- Remove redundant work in relocsym.
- Maybe there is a better representation for external relocations
now.
- Fine-grained parallelism in emitting external relocations.
- The old elfrelocsect only iterates over external relocations,
now we iterate over all relocations. Is it too many?
Change-Id: Ib0a8ee8c88d65864c62b89a8d634614f7f2c813e
Reviewed-on: https://go-review.googlesource.com/c/go/+/242603
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
For symbols of size 8 bytes or below, we can map them to 64-bit
hash values using the identity function. There is no need to use
longer and more expensive hash functions.
For them, we introduce another pseudo-package, PkgIdxHashed64. It
is like PkgIdxHashed except that the hash function is different.
Note that the hash value is not affected with trailing zeros,
e.g. "A" and "A\0\0\0" have the same hash value. This allows
deduplicating a few more symbols. When deduplicating them, we
need to keep the longer one.
Change-Id: Iad0c2e9e569b6a59ca6a121fb8c8f0c018c6da03
Reviewed-on: https://go-review.googlesource.com/c/go/+/242362
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Fill in the data at compile time, and get rid of the preprocess
function in the linker.
We need to be careful with symbol alignment: data symbols are
generally naturally aligned, except for string symbols which are
not aligned. When deduplicating two symbols with same content but
different alignments, we need to keep the biggest alignment.
Change-Id: I4bd96adfdc5f704b5bf3a0e723457c9bfe16a684
Reviewed-on: https://go-review.googlesource.com/c/go/+/242081
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
This CL introduces content-addressable symbols (a.k.a. hashed
symbols) to object files. Content-addressable symbols are
identified and referenced by their content hashes, instead of by
names.
In the object file, a new pseudo-package index PkgIdxHashed is
introduced, for content-addressable symbols, and a new block is
added to store their hashes. The hashes are used by the linker to
identify and deduplicate the symbols.
For now, we only support content-addressable symbols that are
always locally defined (i.e. no cross-package references).
As a proof of concept, make string constant symbols content-
addressable.
Change-Id: Iaf53efd74c0ffb54fa95f784628cc84e95844536
Reviewed-on: https://go-review.googlesource.com/c/go/+/242079
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
When using the platform verifier on Windows (because Roots is nil) we
were always enforcing server auth EKUs if DNSName was set, and none
otherwise. If an application was setting KeyUsages, they were not being
respected.
Started correctly surfacing IncompatibleUsage errors from the system
verifier, as those are the ones applications will see if they are
affected by this change.
Also refactored verify_test.go to make it easier to add tests for this,
and replaced the EKULeaf chain with a new one that doesn't have a SHA-1
signature.
Thanks to Niall Newman for reporting this.
Fixes#39360
Fixes CVE-2020-14039
Change-Id: If5c00d615f2944f7d57007891aae1307f9571c32
Reviewed-on: https://team-review.git.corp.google.com/c/golang/go-private/+/774414
Reviewed-by: Katie Hockman <katiehockman@google.com>
Reviewed-on: https://go-review.googlesource.com/c/go/+/242597
Run-TryBot: Katie Hockman <katie@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Copy and adapt tests from text/template, to exercise more of html/template's copy.
Various differences in behavior are flagged with NOTE comments or t.Skip
and documented in #40075. Many of them are probably bugs.
One clarifying test case added to both text/template and html/template.
No changes to the package itself.
Change-Id: Ifefad83d647db846040d24c2741a0244b00ade82
Reviewed-on: https://go-review.googlesource.com/c/go/+/241084
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The special case is no longer needed, didn't actually work, and
we no longer even save this map anywhere (see CL 240621 for more
information).
Change-Id: I19bcf32cace22decf50fd6414d4519cc51cbb0be
Reviewed-on: https://go-review.googlesource.com/c/go/+/241982
Reviewed-by: Austin Clements <austin@google.com>
After Dial timeout, force close the TCP connection by writing "hangup"
to the control file. This unblocks the "connect" command if the
connection is taking too long to establish, and frees up the control
file FD.
Fixes#40118
Change-Id: I1cef8539cd9fe0793e32b49c9d0ef636b4b26e1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/241638
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
Set the AttrStatic flag on compiler-emitted TOC symbols for ppc64; these
symbols don't need to go into the final symbol table in Go binaries.
This fixes a buglet introduced by CL 240539 that was causing failures
on the aix builder.
Change-Id: If8b63bcf6d2791f1ec5a0c371d2d11e806202fd2
Reviewed-on: https://go-review.googlesource.com/c/go/+/241637
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It is called by the signal handler before switching to gsignal
(sigtrampgo -> sigfwdgo -> dieFromSignal -> raise)
which means that it must not split the stack.
All other instances of raise are already marked nosplit.
Fixes#40076
Change-Id: I4794491331af48c46d0d8ebc82d34c6483f0e6cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/241121
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Use of a nil *File as an argument should not result in a panic,
but result in the ErrInvalid error being returned.
Fix the copy_file_range implementation to preserve this semantic.
Fixes#40115
Change-Id: Iad5ac39664a3efb7964cf55685be636940a8db13
Reviewed-on: https://go-review.googlesource.com/c/go/+/241417
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Don't emit symbol table entries for compiler-generated file-local
symbols (this category includes .stmp_* temporaries and *.stkobj
symbols). Note that user-written static symbols within assembler
sources will still be added to the symbol table. Apply the same test
when emitting DWARF for global variables.
Change-Id: I4db77a2750a0b575e051dfea895c4742cf6709a6
Reviewed-on: https://go-review.googlesource.com/c/go/+/240539
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Mark compiler-generated ".stmp_%d" and "<fn>.stkobj" symbols as
AttrStatic, so as to tell the linker that they do not need to be
inserted into its name lookup tables.
Change-Id: I59ffd11659b2c54c2d0ad41275d05c3f919e3b88
Reviewed-on: https://go-review.googlesource.com/c/go/+/240497
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
I'm from Hootsuite. We're a Canadian tech company who provides products
and services to businesses, organizations and individuals to really help
them succeed on social. We have leveraged Go in our stack for the past
4+ years. I am super happy to give back to Go on behalf of Hootsuite
through a small contribution to pkgsite (with a few more in the works).
We love this project and we love open source :)
Hopefully we can give back more in the future!
Kush
Change-Id: Id534a41d78e17e1fa48a8ddecd1ca110cf812388
GitHub-Last-Rev: 297b8b06e7
GitHub-Pull-Request: golang/go#40088
Reviewed-on: https://go-review.googlesource.com/c/go/+/241218
Reviewed-by: Julie Qiu <julie@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Since Plan 9 doesn't allow us to listen on 0.0.0.0, the Listener
address that's read in from /net is the IPv6 address ::. Convert
this address to 0.0.0.0 when the network is tcp4 or udp4.
Fixes#40045
Change-Id: Icfb69b823e5b80603742d23c3762a812996fe43f
Reviewed-on: https://go-review.googlesource.com/c/go/+/240918
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
This doesn't change how ExtraNames are printed, so as not to cause
unnecessary churn of current outputs. Switched the ExtraNames check to a
nil check as we are checking for just-parsed values.
Fixes#39924Fixes#39873
Change-Id: Ifa07cfc1a057d73643710a774ef8a154222db187
Reviewed-on: https://go-review.googlesource.com/c/go/+/240543
Run-TryBot: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
TestDependencies defines the dependency policy
(what can depend on what) for the standard library.
The standard library has outgrown the idea of writing
the policy as a plain map literal. Also, the checker was
ignoring vendored packages, which makes it miss real
problems.
This commit adds a little language for describing
partial orders and rewrites the policy in that language.
It also changes the checker to look inside vendored
packages and adds those to the policy as well.
This turned up one important problem: net is depending
on fmt, unicode via golang.org/x/net/dns/dnsmessage,
filed as #40070.
This is a test-only change, so it should be appropriate
even for the release freeze, especially since it identified
a real bug.
Change-Id: I9b79f30761f167b8587204c959baa973583e39f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/241078
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Following CL 240399 and CL 240400, do the same for Mach-O.
Linking cmd/compile with external linking,
name old time/op new time/op delta
Asmb2_GC 32.7ms ± 2% 13.5ms ± 6% -58.56% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
Asmb2_GC 16.5MB ± 0% 6.4MB ± 0% -61.15% (p=0.008 n=5+5)
Change-Id: I0fd7019d8713d1940e5fbbce4ee8eebd926451a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/241178
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The loader writeBlock() function has code that tries to skip the
initial portion of the input symbols list depending on the address of
the section being written-- this code is dead (skipping is never
triggered) due to similar skipping in the callers; remove this
preamble.
Change-Id: I9769694a3194faf73ebebbbc10ceba4928c3087c
Reviewed-on: https://go-review.googlesource.com/c/go/+/241067
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The errors on these lines are meant to be discarded.
Add a comment to make that extra clear.
Change-Id: I38f72af6dfbb0e86677087baf47780b3cc6e7d40
Reviewed-on: https://go-review.googlesource.com/c/go/+/241083
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Introduce a new loader method "SetCarrierSym", to be used when
establishing container/containee symbol relationships for symbol
bucketing in the symtab phase.
This new method is intended to be employed in situations where you
have a series of related symbols will be represented by a single
carrier symbol as a combined entity. The pattern here is that the
sub-symbols contain content but will be anonymous from a symbol table
perspective; the carrier symbol has no content itself but will appear
in the symbol table. Examples of carrier symbols that follow this
model are "runtime.itablink" and "runtime.typelink".
Change-Id: I1a3391a71062c7c740cb108b3fa210b7f69b81ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/240509
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Introduce a new loader method "AddInteriorSym" to be used when
establishing container/containee symbol relationships for host object
sub-symbols and GOT/dynamic sub-symbols.
Interior symbols are employed in situations where you have a
"container" or "payload" symbol that has content, and then a series of
"interior" sub-symbols that point into a portion of the container
symbol's content. Each interior symbol will typically have a useful
name / size / value, but no content of its own. From a symbol table
perspective the container symbol is anonymous, but the interior
symbols are added to the output symbol table.
Change-Id: I919ed5dbbfe2ef2c9a76214f7ea9b384a1be6297
Reviewed-on: https://go-review.googlesource.com/c/go/+/240508
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
In CL 240399 we changed to precompute the size for ELF relocation
records and use mmap to write them, but we left architectures
where elfreloc1 write non-fixed number of bytes. This CL handles
those architectures. When a Go relocation will turn into multiple
ELF relocations, in relocsym we account this difference and add
it to the size calculation. So when emitting ELF relocations, we
know the number of ELF relocations to be emitted.
Change-Id: I6732ab674b442f4618405e5412a77f6e4a3315d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/241079
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Now that we write ELF relocation records in mapped memory with
known sizes and offsets, we can write them in parallel.
Further speed up Asmb2 pass. Linking cmd/compile with external
linking,
Asmb2 141ms ± 4% 97ms ± 5% -30.98% (p=0.000 n=10+9)
Change-Id: I52c2b9230e90ed4421c21d7ef13a4f1e996f6054
Reviewed-on: https://go-review.googlesource.com/c/go/+/240400
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Currently, ELF relocations are generated sequentially in the heap
and flushed to output file periodically. In fact, in some cases,
the output size of the relocation records can be easily computed,
as a relocation entry has fixed size. We only need to count the
number of relocation records to compute the size.
Once the size is computed, we can mmap the output with the proper
size, and directly write relocation records in the mapped memory.
It also opens the possibility of writing relocations in parallel
(not done in this CL).
Note: on some architectures, a Go relocation may turn into
multiple ELF relocations, which makes size calculation harder.
This CL does not handle those cases, and it still writes
sequentially in the heap there.
Linking cmd/compile with external linking,
name old time/op new time/op delta
Asmb2 190ms ± 2% 141ms ± 4% -25.74% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
Asmb2_GC 66.8MB ± 0% 8.2MB ± 0% -87.79% (p=0.008 n=5+5)
name old live-B new live-B delta
Asmb2_GC 66.9M ± 0% 55.2M ± 0% -17.58% (p=0.008 n=5+5)
Change-Id: If7056bbe909dc90033eef6b9c4891fcca310602c
Reviewed-on: https://go-review.googlesource.com/c/go/+/240399
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Summary
The crypto/tls/generate_cert.go utility should only set the template
x509.Certificate's KeyUsage field to a value with the
x509.KeyUsageKeyEncipherment bits set when the certificate subject
public key is an RSA public key, not an ECDSA or ED25519 public key.
Background
RFC 5480 describes the usage of ECDSA elliptic curve subject keys with
X.509. Unfortunately while Section 3 "Key Usages Bits" indicates which
key usage bits MAY be used with a certificate that indicates
id-ecPublicKey in the SubjectPublicKeyInfo field it doesn't provide
guidance on which usages should *not* be included (e.g. the
keyEncipherment bit, which is particular to RSA key exchange). The same
problem is present in RFC 8410 Section 5 describing Key Usage Bits for
ED25519 elliptic curve subject keys.
There's an update to RFC 5480 in last call stage within the IETF LAMPS
WG, draft-ietf-lamps-5480-ku-clarifications-00. This update is meant
to clarify the allowed Key Usages extension values for certificates with
ECDSA subject public keys by adding:
> If the keyUsage extension is present in a certificate that indicates
> id-ecPublicKey as algorithm of AlgorithmIdentifier [RFC2986] in
> SubjectPublicKeyInfo, then following values MUST NOT be present:
>
> keyEncipherment; and
> dataEncipherment.
I don't believe there is an update for RFC 8410 in the works but I
suspect it will be clarified similarly in the future.
This commit updates generate_cert.go to ensure when the certificate
public key is ECDSA or ED25519 the generated certificate has the
x509.Certificate.KeyUsage field set to a value that doesn't include KUs
specific to RSA. For ECDSA keys this will adhere to the updated RFC 5480
language.
Fixes#36499
Change-Id: Ib1b0757c039b7fe97fc6d1e826fe6b88856c1964
GitHub-Last-Rev: a8f34fb33d
GitHub-Pull-Request: golang/go#36500
Reviewed-on: https://go-review.googlesource.com/c/go/+/214337
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts https://golang.org/cl/191783.
Reason for revert: Broke too many programs which depended on the previous
behavior, even when it was the opposite of what the documentation said.
We can attempt to fix the original issue again for 1.16, while keeping
those programs in mind.
Fixes#39427.
Change-Id: I7a7f24b2a594c597ef625aeff04fff29aaa88fc6
Reviewed-on: https://go-review.googlesource.com/c/go/+/240657
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
On Linux, the linker uses fallocate to preallocate the output
file storage. The underlying file system may not support
fallocate, causing the test to fail. Skip the test in this case.
On darwin, apparently F_PREALLOCATE allocates from the end of the
allocation instead of the logical end of the file. Adjust the
size calculation.
Fixes#39905.
Change-Id: I01e676737fd2619ebbdba05c7cf7f424ec27de35
Reviewed-on: https://go-review.googlesource.com/c/go/+/240618
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When linking against a Go shared library, when a global variable
in the main module has a type defined in the shared library, the
linker needs to pull the GC data from the shared library to build
the GC program for the global variable. Currently, this fails
silently, as the shared library file is closed too early and the
read failed (with no error check), causing a zero GC map emitted
for the variable, which in turn causes the runtime to treat the
variable as pointerless.
For now, fix this by keeping the file open. In the future we may
want to use mmap to read from the shared library instead.
Also add error checking. And fix a (mostly harmless) mistake in
size caluculation.
Also remove an erroneous condition for ARM64. ARM64 used to have
a special case to get the addend from the relocation on the
gcdata field. That was removed, but the new code accidentally
returned 0 unconditionally. It's no longer necessary to have any
special case, since the addend is now applied directly to the
gcdata field on ARM64, like on all the other platforms.
Fixes#39927.
This is the second attempt of CL 240462. And this reverts
CL 240616.
Change-Id: I01c82422b9f67e872d833336885935bc509bc91b
Reviewed-on: https://go-review.googlesource.com/c/go/+/240621
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The special symbols are linker-created symbols for special
purposes, therefore reachable (otherwise the linker won't create
them). Mark them so, so they get converted to sym.Symbols when we
convert to old symbol representation.
In particular, the failure for building shared library on PPC64
is due to .TOC. symbol not being converted to sym.Symbol, but
referenced in addmoduledata.
Change-Id: Iaf5d145ffa5d15122e86a6e6983514e56dd5d456
Reviewed-on: https://go-review.googlesource.com/c/go/+/240620
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Mention support for the 64-bit RISC-V instruction set (GOARCH=riscv64)
in the "Installing Go from source" document. Also sort the list of
supported instruction sets alphabetically.
Updates #27532
Change-Id: I07a443044a41a803853978dd7f7446de89ecceb5
Reviewed-on: https://go-review.googlesource.com/c/go/+/240377
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
When linking against a Go shared library, when a global variable
in the main module has a type defined in the shared library, the
linker needs to pull the GC data from the shared library to build
the GC program for the global variable. Currently, this fails
silently, as the shared library file is closed too early and the
read failed (with no error check), causing a zero GC map emitted
for the variable, which in turn causes the runtime to treat the
variable as pointerless.
For now, fix this by keeping the file open. In the future we may
want to use mmap to read from the shared library instead.
Also add error checking. And fix a (mostly harmless) mistake in
size caluculation.
Also remove an erroneous condition for ARM64. ARM64 used to have
a special case to get the addend from the relocation on the
gcdata field. That was removed, but the new code accidentally
returned 0 unconditionally. It's no longer necessary to have any
special case, since the addend is now applied directly to the
gcdata field on ARM64, like on all the other platforms.
Fixes#39927.
Change-Id: Iecd32315b326c7059587fdc190e2fa99426e497e
Reviewed-on: https://go-review.googlesource.com/c/go/+/240462
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Austin Clements <austin@google.com>
We cannot use "0.0.0.0" (IPv4) or "::" (IPv6) for local address, so
don't use those addresses in the control message. Alternatively, we
could've used "*" instead.
Fixes#39931
Change-Id: Ib2dcbb1a0c648296c3ecaddbe938053a569b1f1b
Reviewed-on: https://go-review.googlesource.com/c/go/+/240464
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
The sample code in 'Interfaces and methods' section contains a
data race. Handlers are served concurrently. The handler does write
and read operations; `go test -race` would fail (with concurrent
requests). Since the doc is frozen and the code remains less
cluttered without locks/atomic, don't change the sample code.
Change-Id: I654b324d2f0b7f48497822751907c7d39e2f0e3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/239877
Reviewed-by: Rob Pike <r@golang.org>
This adds an alt tag for accessibility. The alt text is a visual
description of the text that is read out loud to users using a
screen reader. The HTML specifications indicate that alt tags for
decorative images should be left blank.
Fixes#39861
Change-Id: I76c39a461ceabe685826aa46e4f26ad893d50634
Reviewed-on: https://go-review.googlesource.com/c/go/+/240258
Reviewed-by: Alexander Nohe <alex.nohe427@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Make use of the extra parameter on "connect" control message to set the
local IP address and port. The ip(3) man page doesn't document that the
local IP address is settable, but upon inspection of the source code,
it's clearly settable.
Fixes#39747
Change-Id: Ied3d60452f20d6e5af23d1c1dcb34774af0dbd5b
Reviewed-on: https://go-review.googlesource.com/c/go/+/240064
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
We were handling loopback devices when attempting to read hardware
address, but packet interfaces were not being handled. As a general fix,
don't attempt to read hardware address of any device that's not inside
/net.
Fixes#39908
Change-Id: Ifa05e270357e111c60906110db2cc23dc7c1c49c
Reviewed-on: https://go-review.googlesource.com/c/go/+/240259
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
This constant does not make it into DWARF because it is an ideal
constant larger than maxint (1<<63-1). DWARF has no way to represent
signed values that large. Define a different typed constant that
is unsigned and so can represent this constant properly.
Viewcore needs this constant to interrogate the heap data structures.
In addition, the sign of arenaBaseOffset changed in 1.15, and providing
a new name lets viewcore detect the sign change easily.
Change-Id: I4274a2f6e79ebbf1411e85d64758fac1672fb96b
Reviewed-on: https://go-review.googlesource.com/c/go/+/240198
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
CL 230037 changed cmd/cgo to emit "type _Ctype_foo = bar" aliases for
all C.foo types mentioned in the original Go source files. However,
cmd/cgo already emits an appropriate type definition for _Ctype_void.
So if a source file explicitly mentions C.void, this resulted in
_Ctype_void being declared multiple times.
This CL fixes the issue by suppressing the "type _Ctype_void =
_Ctype_void" alias before printing it. This should be safe because
_Ctype_void is the only type that's specially emitted in out.go at the
moment.
A somewhat better fix might be to fix how _Ctype_void is declared in
the cmd/cgo "frontend", but this is a less invasive fix.
Fixes#39877.
Change-Id: Ief264b3847c8ef8df1478a6333647ff2cf09b63d
Reviewed-on: https://go-review.googlesource.com/c/go/+/240180
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also crypto/tls.Config.BuildNameToCertificate.
Note that this field and method were deprecated in the Go 1.14 release,
so this change is to the 1.14 release notes.
Fixes#37626
Change-Id: If8549bc746f42a93f1903439e1b464b3e81e2c19
Reviewed-on: https://go-review.googlesource.com/c/go/+/240005
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Currently, on most platforms, the start/end symbols runtime.text
and runtime.etext are defined in symtab pass and assigned values
in address pass. In some cases (darwin+dynlink or AIX+external),
however, they are defined and assigned values in textaddress pass
(because they need non-zero sizes). Then their values get
overwritten in address pass. This is bad. The linker expects
their values to be consistent. In particular, in CL 239281,
findfunctab is split to two parts. The two parts need to have a
consistent view of the start/end symbols. If its value changes in
between, bad things can happen.
This CL fixes it by always defining runtime.text/etext symbols in
the textaddress pass.
Fix darwin and AIX builds.
Change-Id: Ifdc1bcb69d99be1b7e5b4fd31d473650c03e3b9d
Reviewed-on: https://go-review.googlesource.com/c/go/+/240065
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Create a new class of symbols internal to the linker. These symbols live
in the Loader, and are real smybols, but have no data, only size. After
symbols are allocated in the binary in asmb() a function is called that
is responsible for filling in the data.
This allows the linker to create large symbols, but not pay the price on
the heap memory.
Change-Id: Ib4291fc6e578478057ed2ec163d7b27426f1d5ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/239280
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
It doesn't have to. The type in the aux field is authoritative.
There are cases involving casting from interface{} where pointers
have a placeholder pointer type (because the type is not known when
the IData op is generated).
The check was introduced in CL 13447.
Fixes#39459
Change-Id: Id77a57577806a271aeebd20bea5d92d08ee7aa6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/239817
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
File.Sync was returning *SyscallError instead of *PathError on Plan 9.
Adjust the error type to match other systems.
Fixes#39800
Change-Id: I844e716eb61c193ef78d29cb0b4a3ef790bb3320
Reviewed-on: https://go-review.googlesource.com/c/go/+/239857
Reviewed-by: David du Colombier <0intro@gmail.com>
The Go compiler includes special treatment for a small set of very
commonly used type symbols (26 to be exact); for these types it
doesn't bother to emit type descriptors for "normal" compilations, and
instead only generates them for the runtime package, so as to reduce
object file bloat.
This patch moves the set of type symbols in question from the
PkgIdxNone index space (in the object file) to the PkgIdxBuiltin
space, which saves some work in the compiler and loader (reduces each
package's index space slightly).
Change-Id: I039c805e05c1aef26f035e52760fd0a0af40f7a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/239658
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Change the object file writer to avoid adding entries to the object
file string table for builtin functions. This helps save some very
small amount of space in the object file.
Change-Id: Ic3b94a154e00eb4c7378b57613580c7073b841bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/239657
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
After CL 228645 some mentions of the Deadline methods referred
to the Timeout method, and some to os.ErrDeadlineExceeded.
Stop referring to the Timeout method, to encourage ErrDeadlineExceeded.
For #31449
Change-Id: I27b8ff34f31798f38b06437546886af8cce98ca4
Reviewed-on: https://go-review.googlesource.com/c/go/+/239705
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Switched the generator to using the open source releases of the root
store rather than HTML parsing, while trying to emulate the sorting
algorithm of the table to reduce churn.
Updates #38843
Change-Id: I78608d245eabc2a35c2f98635ed5f1a531ad2ba8
Reviewed-on: https://go-review.googlesource.com/c/go/+/239557
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
On AIX, in relocsym we call Xcoffadddynrel, which adds a
relocation record to a global array. relocsym already runs in
parallel. In the past we only parallelize over segments, and
we call Xcoffadddynrel only for symbols in data segment, so it is
effectively called sequentially. In CL 239197 we started to do
more fine-grained parallelism, so we need to make sure it is safe
to call Xcoffadddynrel in parallel.
Fix AIX build.
Change-Id: I3128193995a5a99d9fa04c8e728e590f17298da3
Reviewed-on: https://go-review.googlesource.com/c/go/+/239561
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The code in the compiler's DWARF line table generation emits line
table ops at the end of each function fragment to reset the state
machine registers back to an initial state, so that when the line
table fragments for each function are stitched together into a
compilation unit, each fragment will have a clean starting point. The
set-file/set-line ops emitted in this code were being applied to the
last row of the line table, however, meaning that they were
overwriting the existing values.
To avoid this problem, add code to advance the PC past the end of the
last instruction in the function, and switch to just using an
end-of-sequence operator at the end of each function instead of
explicit set-file/set-line ops.
Updates #39757.
Change-Id: Ieb30f83444fa86fb1f2cd53862d8cc8972bb8763
Reviewed-on: https://go-review.googlesource.com/c/go/+/239286
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Normally, packages are loaded in dependency order, and if a
Library object is not nil, it is already loaded with the actual
fingerprint. In shared build mode, however, packages may be added
not in dependency order (e.g. go install -buildmode=shared std
adds all std packages before loading them), and it is possible
that a Library's fingerprint is not yet loaded. Skip the check
in this case (when the fingerprint is the zero value).
Fixes#39777.
Change-Id: I66208e92bf687c8778963ba8e33e9bd948f82f3a
Reviewed-on: https://go-review.googlesource.com/c/go/+/239517
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
We can apply relocations of a symbol right after the symbol data
is copied to output buffer. This should help locality and
parallelism (parallelizing over blocks, instead of over segments).
Linking cmd/compile,
Asmb+Reloc 23.9ms ±18% 16.5ms ±11% -30.73% (p=0.008 n=5+5)
Linking cmd/compile with external linking,
Asmb+Reloc 74.0ms ± 3% 33.8ms ± 8% -54.32% (p=0.008 n=5+5)
In external linking mode, allocation goes up slightly, as we do
smaller batching now. It doesn't seem too bad.
Asmb+Reloc 15.0MB ± 0% 16.7MB ± 0% +11.22% (p=0.008 n=5+5)
Change-Id: Ide33d9ff86c39124c8f5cfc050d7badc753a1ced
Reviewed-on: https://go-review.googlesource.com/c/go/+/239197
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Follow glibc's implementation and check secondary group memberships
using Getgroups.
No test since we cannot easily change file permissions when not running
as root and the test is meaningless if running as root.
Same as CL 238722 did for x/sys/unix
Updates #39660
Change-Id: I6af50e27b255e33405558947a0ab3dfbc33b2d50
Reviewed-on: https://go-review.googlesource.com/c/go/+/238937
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The preceding paragraph suggests the test run will produce a file called trace.out.
The same name, trace.out, is used in the output from go help testflag, thus we change the go test line instead of changing the preceding paragraph.
Change-Id: Ib1fa7e49e540853e263a2399b16040ea6f41b703
GitHub-Last-Rev: 3535e62bf8
GitHub-Pull-Request: golang/go#39709
Reviewed-on: https://go-review.googlesource.com/c/go/+/238997
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
In os.Getenv and os.Setenv, instead of directly reading and writing the
Plan 9 environment device (which may be shared with other processes),
use a local copy of environment variables cached at the start of
execution. This gives the same semantics for Getenv and Setenv as on
other operating systems which don't share the environment, making it
more likely that Go programs (for example the build tests) will be
portable to Plan 9.
This doesn't preclude writing non-portable Plan 9 Go programs which make
use of the shared environment semantics (for example to have a command
which exports variable definitions to the parent shell). To do this, use
ioutil.ReadFile("/env/"+key) and
ioutil.WriteFile("/env/"+key, value, 0666)
in place of os.Getenv(key) and os.Setenv(key, value) respectively.
Note that CL 5599054 previously added env cacheing, citing efficiency
as the reason. However it made the cache write-through, with Setenv
changing the shared environment as well as the cache (so not consistent
with Posix semantics), and Clearenv breaking the sharing of the
environment between the calling thread and other threads (leading to
unpredictable behaviour). Because of these inconsistencies (#8849),
CL 158970045 removed the cacheing again.
This CL restores cacheing but without write-through. The local cache is
initialised at start of execution, manipulated by the standard functions
in syscall/env_unix.go to ensure the same semantics, and exported only
when exec'ing a new program.
Fixes#34971Fixes#25234Fixes#19388
Updates #38772
Change-Id: I2dd15516d27414afaf99ea382f0e00be37a570c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/236520
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Fazlul Shahriar <fshahriar@gmail.com>
Reviewed-by: David du Colombier <0intro@gmail.com>
reflect.assignTo writes to the target using write barriers. Make sure
that the memory it is writing to is zeroed, so the write barrier does
not read pointers from uninitialized memory.
Fixes#39541
Change-Id: Ia64b2cacc193bffd0c1396bbce1dfb8182d4905b
Reviewed-on: https://go-review.googlesource.com/c/go/+/238760
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes the *noov opcodes so they handle a constant argument properly.
Most of the infrastructure for this CL is in CL 238077 (the arm32 one).
Fixes#39505
Change-Id: Id424a4e18964b848f05aa42f4d78e5f2e2cdf43b
Reviewed-on: https://go-review.googlesource.com/c/go/+/237999
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Encode the flag results in an auxint field instead of having
one opcode per flag state. This helps us handle the new *noov
branches in a unified manner.
This is only for arm, arm64 is in a subsequent CL.
We could extend to other architectures as well, athough it would
only be cleanup, no behavioral change.
Update #39505
Change-Id: Ia46cea596faad540d1496c5915ab1274571543f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/238077
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This updates the ppc64 asm doc file, including information on
updates to the objdump, correcting information on operand order,
and adding some information on shifts.
Change-Id: Ib8ed53eac86c2121ea5b657c361ad92aae31cb32
Reviewed-on: https://go-review.googlesource.com/c/go/+/238237
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
By keeping a tail pointer, we can append to a patchList in constant
time, rather than in time proportional to the length of the list. This
gets rid of the quadratic compile times we were seeing for long series
of alternations.
This is basically the same change as
e9d517989f.
Fixes#39542.
Change-Id: Ib4ca0ca9c55abd1594df1984653c7d311ccf7572
Reviewed-on: https://go-review.googlesource.com/c/go/+/238079
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Ensure that the exact Request passed to Transport.RoundTrip
is returned in the Response. Do not replace the Request with
a copy when resetting the request body.
Fixes#39533
Change-Id: Ie6fb080c24b0f6625b0761b7aa542af3d2411817
Reviewed-on: https://go-review.googlesource.com/c/go/+/237560
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Currently, for runtime functions and nosplit functions, it is
considered "all unsafe", meaning that the entire function body is
unsafe points. In the past, we didn't mark CALLs in such
functions unsafe, which is fixed in CL 230541. We also didn't
mark block control instructions (for mostly-empty blocks) unsafe.
This CL fixes it.
May fix#36110.
Change-Id: I3be8fdcef2b294e5367b31eb1c1b5e79966565fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/236597
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 225357 added tests for Scanner not panicking on bad readers.
CL 225557 created a named error value that is returned instead.
CL 237739 documents that the bufio.ErrBadReadCount is returned
when bufio.Scanner is used with an invalid io.Reader.
This suggests we wouldn't want that behavior to be able to change
without a test noticing it, so modify the tests to check for the
exact error value instead of just any non-nil one.
For #38053.
Change-Id: I4b0b8eb6804ebfe2c768505ddb94f0b1017fcf8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/238217
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This patch introduces parallelization of DWARF generation on a per
compilation unit basis. Each compilation unit now operates on a
separate set of symbols, so it's safe to send each compilation unit to
a goroutine to be processed in parallel.
Doing this requires some restructing to ensure that any new symbols
needed are created up front, since we can't create any new syms during
the parallel portion. Similarly, the parallel portion can't set any
symbol attributes, so the check that verifies we haven't doubly listed
any DIE syms had to be reworked, and setting of reachability has to be
delayed until after the parallel phase is complete.
Change-Id: I3042b76e9b597bb1a6a44dce19efba2d02bed76b
Reviewed-on: https://go-review.googlesource.com/c/go/+/237679
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The loader's SymbolBuilder Add*/Set* methods include a call to mark
the underlying symbol as reachable (as a convenience, so that callers
would not have to set it explicitly). This code was carried over from
the corresponding sym.Symbol methods; back in the sym.Symbol world
unreachable symbols were never removed from the AllSyms slice, hence
setting and checking reachability was a good deal more important.
With the advent of the loader and the new deadcode implementation,
there is less of a need for this sort of fallback, and in addition the
implicit attr setting introduces data races in the the loader if there
are SymbolBuilder Add*/Set* method calls in parallel threads, as well
as adding overhead to the methods.
This patch gets rid of the implicit reachability setting, and instead
marks reachability in CreateSymForUpdate, as well as adding a few
explicit SetAttrReachable calls where needed.
Change-Id: I029a0c5a4a24237826a7831f9cbe5180d44cbc40
Reviewed-on: https://go-review.googlesource.com/c/go/+/237678
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Refactor some of the linker's DWARF generation methods so as to have
helper routines that do all the work for a given comp unit for a given
section (range, loc, etc). No change in functionality, this is just a
reorg in preparation for a later patch in this sequence.
Change-Id: I86fc789220326a4e522904a5924c8971d6757189
Reviewed-on: https://go-review.googlesource.com/c/go/+/237677
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Rework the way symbols are handled in DWARF line table generation to
eliminate copying the data payload for all SWDWARFLINES syms (emitted
by the compiler) into the payload of the ".debug_line" section symbol
(generated by the linker). Instead, chain together the SWDWARFLINES
symbols into a list, then append that list to the section sym list in
dwarfp (this moves us from a single monolithic .debug_line to a
.debug_line section sym followed by a list symbols (one per function
and an epilog symbol per compilation unit). To enable this work, move
the emission of the DW_LNE_set_address op (at the start of each
function) from the linker to the compiler.
Change-Id: Iec61b44a451f7a386c82a89bf944de482b018789
Reviewed-on: https://go-review.googlesource.com/c/go/+/237427
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Don't emit the .debug_pubnames/.debug_pubtypes sections. These sections
are not used by either GDB or Delve, and C++ compilers [notably GCC
and Clang] no longer emit the sections by default.
Change-Id: Ic3309755e88c8e1aa28a29366bc7f0df1748fe64
Reviewed-on: https://go-review.googlesource.com/c/go/+/237426
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The linker's asmb phase for ELF has a chunk of code that decides where
to place the .symtab and .strtab sections, which appear after after
the DWARF data; this code currently tries to align the start of the
.symtab section using the value of -R (stored in *FlagRound). This
patch gets rid of this additional alignment and instead just aligns
.symtab by pointer size. The -R value is needed for loadable
segments/sections (such as text or data), not for non-loadable
sections (e.g. symtab). On most architectures the *FlagRound value is
4k, however on ARM64 it is 64k, meaning that aligning symtab on this
boundary can waste a good chunk of space.
Change-Id: Ib51f3ad5611f5614768355eb8533084ba117a8e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/238019
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When a signal is received, the runtime probes whether an
alternate signal stack is set, if so, adjust gsignal's stack to
point to the alternate signal stack. This is done in
adjustSignalStack, which calls sigaltstack "syscall", which is a
libc call on darwin through asmcgocall. asmcgocall decides
whether to do stack switch based on whether we're running on g0
stack, gsignal stack, or regular g stack. If g is not set to
gsignal, asmcgocall may make wrong decision. Set g first.
adjustSignalStack is recursively nosplit, so it is okay that
temporarily gsignal.stack doesn't match the stack we're running
on.
May fix#39079.
Change-Id: I59b2c5dc08c3c951f1098fff038bf2e06d7ca055
Reviewed-on: https://go-review.googlesource.com/c/go/+/238020
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The GCC code repository is now hosted on Git. Adjust the instructions in
gccgo_install.html accordingly.
Change-Id: I443a8b645b63e63785979bc0554521e3dc3b0bf7
Reviewed-on: https://go-review.googlesource.com/c/go/+/237798
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Make sure that if a field comparison might panic, we evaluate
(and short circuit if not equal) all previous fields, and don't
evaluate any subsequent fields.
Add a bunch more tests to the equality+panic checker.
Update #8606
Change-Id: I6a159bbc8da5b2b7ee835c0cd1fc565575b58c46
Reviewed-on: https://go-review.googlesource.com/c/go/+/237919
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts golang.org/cl/190659 and golang.org/cl/226218, minus the
regression tests in the latter.
The original work happened in golang.org/cl/151157, which was reverted
in golang.org/cl/190909 due to a crash found by fuzzing.
We tried a second time in golang.org/cl/190659, which shipped with Go
1.14. A bug was found, where strings would be mangled in certain edge
cases. The fix for that was golang.org/cl/226218, which was backported
into Go 1.14.4.
Unfortunately, a second regression was just reported in #39555, which is
a similar case of strings getting mangled when decoding under certain
conditions. It would be possible to come up with another small patch to
fix that edge case, but instead, let's just revert the entire
optimization, as it has proved to do more harm than good. Moreover, it's
hard to argue or prove that there will be no more such regressions.
However, all the work wasn't for nothing. First, we learned that the way
the decoder unquotes tokenized strings isn't simple; initially, we had
wrongly assumed that each string was unquoted exactly once and in order.
Second, we have gained a number of regression tests which will be useful
to prevent the same mistakes in the future, including the test cases we
add in this CL.
Fixes#39555.
Change-Id: I66a6919c2dd6d9789232482ba6cf3814eaa70f61
Reviewed-on: https://go-review.googlesource.com/c/go/+/237838
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
TestNetpollBreak was sometimes timing out on Plan 9, where
netpoll_stub.go implements only enough of the network poller
to support runtime timers, using a notetsleep / notewakeup
pair. The runtime.lock which serialises the use of the note
doesn't guarantee fairness, and in practice the netpoll call
used by the test can be starved by the netpoll call from the
scheduler which supports the overall 'go test' timeout.
Calling osyield after relinquishing the lock gives the two
callers a more even chance to take a turn, which prevents
the test from timing out.
Fixes#39437
Change-Id: Ifbe6aaf95336d162d9d0b6deba19b8debf17b071
Reviewed-on: https://go-review.googlesource.com/c/go/+/237698
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The benchmark throughput numbers don't change, but the set-up time (the
time taken before the b.ResetTimer() call) drops from 460ms to 4ms.
Change-Id: I5a6756643dff6127f6d902455d83459c084834fc
Reviewed-on: https://go-review.googlesource.com/c/go/+/237757
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This alert is triggering occasionally. I've investigated the
collisions that happen, and they all seem to be pairwise, so they are
not a big deal. "pairwise" = when there are 32 collisions, it is two
keys mapping to the same hash, 32 times, not 33 keys all mapping to
the same hash.
Add some t.Logf calls in case this comes back, which will help isolate
the problem.
Fixes#39352
Change-Id: I1749d7c8efd0afcf9024d8964d15bc0f58a86e4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/237718
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Support for linux/386 was added to Delve in version 1.4.1, but the
version of Delve currently installed on the linux-386-longtest
builder is 1.2.0. That isn't new enough, which causes the test
to fail. Skip it on that builder until it can be made to work.
The only reason it used to pass on the linux-386-longtest builder
before is because that builder was misconfigured to run tests for
linux/amd64. This was resolved in CL 234520.
Also improve internal documentation and the text of skip reasons.
Fixes#39309.
Change-Id: I395cb1f076e59dd3a3feb53e1dcdce5101e9a0f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/237603
Reviewed-by: David Chase <drchase@google.com>
Currently, a method of a reachable type is live if it matches a
method of a reachable interface. In fact, we only need to retain
the method if the type is actually converted to an interface. If
the type is never converted to an interface, there is no way to
call the method through an interface method call (but the type
descriptor could still be used, e.g. in calling
runtime.newobject).
A type can be used in an interface in two ways:
- directly converted to interface. (Any interface counts, as it
is possible to convert one interface to another.)
- obtained by reflection from a related type (e.g. obtaining an
interface of T from []T).
For the former, we let the compiler emit a marker on the type
descriptor symbol when it is converted to an interface. In the
linker, we only need to check methods of marked types.
For the latter, when the linker visits a marked type, it needs to
visit all its "child" types as marked (i.e. potentially could be
converted to interface).
This reduces binary size:
cmd/compile 18792016 18706096 (-0.5%)
cmd/go 14120572 13398948 (-5.1%)
Change-Id: I4465c7eeabf575f4dc84017214c610fa05ae31fd
Reviewed-on: https://go-review.googlesource.com/c/go/+/237298
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
We replaced http.DefaultClient with securityPreservingHTTPClient,
but we still need that too many redirects check. This issue introduced
by CL 156838.
We introduce a special path to test rediret requests in the script test
framework. You can specify the number of redirects in the path.
$GOPROXY/redirect/<count>/...
Redirect request sequence details(count=8):
request: $GOPROXY/mod/redirect/8/rsc.io/quote/@v/v1.2.0.mod
redirect: $GOPROXY/mod/redirect/7/rsc.io/quote/@v/v1.2.0.mod
redirect: $GOPROXY/mod/redirect/6/rsc.io/quote/@v/v1.2.0.mod
redirect: $GOPROXY/mod/redirect/5/rsc.io/quote/@v/v1.2.0.mod
redirect: $GOPROXY/mod/redirect/4/rsc.io/quote/@v/v1.2.0.mod
redirect: $GOPROXY/mod/redirect/3/rsc.io/quote/@v/v1.2.0.mod
redirect: $GOPROXY/mod/redirect/2/rsc.io/quote/@v/v1.2.0.mod
redirect: $GOPROXY/mod/redirect/1/rsc.io/quote/@v/v1.2.0.mod
the last: $GOPROXY/mod/rsc.io/quote/@v/v1.2.0.mod
Fixes#39482
Change-Id: I149a3702b2b616069baeef787b2e4b73afc93b0e
Reviewed-on: https://go-review.googlesource.com/c/go/+/237177
Run-TryBot: Baokun Lee <nototon@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This API and functionality was added late in the Go 1.15 release
cycle, and use within gopls has revealed some shortcomings. It's
possible (but not decided) that we'll want a different API long-term,
so for now this CL renames UsesCgo to a non-exported name to avoid
long-term commitment under the Go 1 compat guarantee.
Updates #16623.
Updates #39072.
Change-Id: I04bc0c161a84adebe43e926df5df406bc794c3db
Reviewed-on: https://go-review.googlesource.com/c/go/+/237417
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The scheduler assumes two special invariants that apply to tuple
selectors (Select0 and Select1 ops):
1. There is only one tuple selector of each type per generator.
2. Tuple selectors and generators reside in the same block.
Prior to this CL the assumption was that these invariants would
only be broken by the CSE pass. The CSE pass therefore contained
code to move and de-duplicate selectors to fix these invariants.
However it is also possible to write relatively basic optimization
rules that cause these invariants to be broken. For example:
(A (Select0 (B))) -> (Select1 (B))
This rule could result in the newly added selector (Select1) being
in a different block to the tuple generator (see issue #38356). It
could also result in duplicate selectors if this rule matches
multiple times for the same tuple generator (see issue #39472).
The CSE pass will 'fix' these invariants. However it will only do
so when optimizations are enabled (since disabling optimizations
disables the CSE pass).
This CL moves the CSE tuple selector fixup code into its own pass
and makes it mandatory even when optimizations are disabled. This
allows tuple selectors to be treated like normal ops for most of
the compilation pipeline until after the new pass has run, at which
point we need to be careful to maintain the invariant again.
Fixes#39472.
Change-Id: Ia3f79e09d9c65ac95f897ce37e967ee1258a080b
Reviewed-on: https://go-review.googlesource.com/c/go/+/237118
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This removes the same logic from run.bat that was removed from
cmd/dist in CL 236819.
The duplicated logic was removed from run.bash and run.rc in CL 6531,
but that part of run.bat was apparently missed (and not noticed
because its effect was redundant).
Also fix a path-separator bug in cmd/addr2line.TestAddr2Line that was
exposed as a result.
Fixes#39478
Updates #39385
Change-Id: I00054966cf92ef92a03681bf23de7f45f46fbb5e
Reviewed-on: https://go-review.googlesource.com/c/go/+/237359
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Restore previously sent SCTs and stapled OCSP response during session
resumption for both TLS 1.2 and 1.3. This behavior is somewhat
complicated for TLS 1.2 as SCTs are sent during the server hello,
so they override what is saved in ClientSessionState. It is likely
that if the server is sending a different set of SCTs there is probably
a reason for doing so, such as a log being retired, or SCT validation
requirements changing, so it makes sense to defer to the server in
that case.
Fixes#39075
Change-Id: I3c0fa2f69c6bf0247a447c48a1b4c733a882a233
Reviewed-on: https://go-review.googlesource.com/c/go/+/234237
Reviewed-by: Filippo Valsorda <filippo@golang.org>
The minor changes to the library section has been populated
with TODOs for individual packages using relnote in CL 235757,
and they've been resolved in the following CLs.
We will look things over as part of finishing touches on
the release notes, but this TODO is resolved for beta 1.
For #37419.
Change-Id: I942f81a957fe8df8f630b4406ca29f73602d080a
Reviewed-on: https://go-review.googlesource.com/c/go/+/237157
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Also do not unset it by default in the tests for cmd/go.
GOROOT_FINAL affects the GOROOT value embedded in binaries,
such as 'cmd/cgo'. If its value changes and a build command
is performed that depends on one of those binaries, the binary
would be spuriously rebuilt.
Instead, only unset it in the specific tests that make assumptions
about the GOROOT paths embedded in specific compiled binaries.
That may cause those tests to do a little extra rebuilding when
GOROOT_FINAL is set, but that little bit of extra rebuilding
seems preferable to spuriously-stale binaries.
Fixes#39385
Change-Id: I7c87b1519bb5bcff64babf1505fd1033ffa4f4fb
Reviewed-on: https://go-review.googlesource.com/c/go/+/236819
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
CL 236857 removed all uses of whitelist/blacklist, which is great.
But it substituted awkward phrasing using allowlist/blocklist,
especially as verbs or participles. This CL uses more standard English,
like "allow the function" or "blocked functions" instead of
"allowlist the function" or "blocklisted functions".
Change-Id: I9106a2fdbd62751c4cbda3a77181358a8a6d0f13
Reviewed-on: https://go-review.googlesource.com/c/go/+/236917
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The removed line assumed that the script's WORK directory is not a
child of any directory containing version-control metadata.
While that assumption does hold in most cases, it does not hold when,
for example, $TMPDIR is $HOME/tmp and $HOME/.git/config exists.
A similar situation may or may not arise when using
golang.org/x/build/cmd/release. Either way, the assertion is incorrect
and was interfering with local testing for #39385.
Updates #39385Fixes#39431
Change-Id: I67813d7ce455aa9b56a6eace6eddebf48d0f7fa6
Reviewed-on: https://go-review.googlesource.com/c/go/+/236818
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
The page sweeper depends on spans being marked if any object in the
span is marked, but currently only greyobject does this.
gcmarknewobject and wbBufFlush1 also mark objects, but neither set
span marks. As a result, if there are live objects on a span, but
they're all marked via allocation or write barriers, then the span
itself won't be marked and the page reclaimer will free the span,
ultimately leading to memory corruption when the memory for those live
allocations gets reused.
Fix this by making gcmarknewobject and wbBufFlush1 also mark pages.
No test because I have no idea how to reliably (or even unreliably)
trigger this.
Fixes#39432.
Performance is a wash or very slightly worse. I benchmarked the
gcmarknewobject and wbBufFlush1 changes independently and both showed
a slight performance improvement, so I'm going to call this noise.
name old time/op new time/op delta
BiogoIgor 15.9s ± 2% 15.9s ± 2% ~ (p=0.758 n=25+25)
BiogoKrishna 15.7s ± 3% 15.7s ± 3% ~ (p=0.382 n=21+21)
BleveIndexBatch100 4.94s ± 3% 5.07s ± 4% +2.63% (p=0.000 n=25+25)
CompileTemplate 204ms ± 1% 205ms ± 1% +0.43% (p=0.000 n=21+23)
CompileUnicode 77.8ms ± 1% 78.1ms ± 1% ~ (p=0.130 n=23+23)
CompileGoTypes 731ms ± 1% 733ms ± 1% +0.30% (p=0.006 n=22+22)
CompileCompiler 3.64s ± 2% 3.65s ± 3% ~ (p=0.179 n=24+25)
CompileSSA 8.44s ± 1% 8.46s ± 1% +0.30% (p=0.003 n=22+23)
CompileFlate 132ms ± 1% 133ms ± 1% ~ (p=0.098 n=22+22)
CompileGoParser 164ms ± 1% 164ms ± 1% +0.37% (p=0.000 n=21+23)
CompileReflect 455ms ± 1% 457ms ± 2% +0.50% (p=0.002 n=20+22)
CompileTar 182ms ± 2% 182ms ± 1% ~ (p=0.382 n=22+22)
CompileXML 245ms ± 3% 245ms ± 1% ~ (p=0.070 n=21+23)
CompileStdCmd 16.5s ± 2% 16.5s ± 3% ~ (p=0.486 n=23+23)
FoglemanFauxGLRenderRotateBoat 12.9s ± 1% 13.0s ± 1% +0.97% (p=0.000 n=21+24)
FoglemanPathTraceRenderGopherIter1 18.6s ± 1% 18.7s ± 0% ~ (p=0.083 n=23+24)
GopherLuaKNucleotide 28.4s ± 1% 29.3s ± 1% +2.84% (p=0.000 n=25+25)
MarkdownRenderXHTML 252ms ± 0% 251ms ± 1% -0.50% (p=0.000 n=23+24)
Tile38WithinCircle100kmRequest 516µs ± 2% 516µs ± 2% ~ (p=0.763 n=24+25)
Tile38IntersectsCircle100kmRequest 689µs ± 2% 689µs ± 2% ~ (p=0.617 n=24+24)
Tile38KNearestLimit100Request 608µs ± 1% 606µs ± 2% -0.35% (p=0.030 n=19+22)
[Geo mean] 522ms 524ms +0.41%
https://perf.golang.org/search?q=upload:20200606.4
Change-Id: I8b331f310dbfaba0468035f207467c8403005bf5
Reviewed-on: https://go-review.googlesource.com/c/go/+/236817
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Previously, if there was a non-directory file with the name vendor or
testdata in the Go source tree, it was possible for some directories
to be skipped by filepath.Walk performed in findGorootModules.
As unusual and unlikely as such non-directory files are, it's better
to ensure all directories are visited, and all modules in the GOROOT
source tree are found.
This increases confidence that tests relying on findGorootModule
will not have unexpected false negatives.
For #36851.
For #36907.
Change-Id: I468e80d8f57119e2c72d546b3fd1e23c31fd6e6c
Reviewed-on: https://go-review.googlesource.com/c/go/+/236600
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This is a followup to CL 96495.
It should be simpler and more robust to achieve .bat files having
CRLF line endings by treating it as a binary file, like all other
files, and checking it in with the desired CRLF line endings.
A test is used to check the entire Go tree, short of directories
starting with "." and named "testdata", for any .bat files that
have anything other than strict CRLF line endings. This will help
catch any accidental modifications to existing .bat files or check
ins of new .bat files.
Importantly, this is compatible with how Gerrit serves .tar.gz files,
making it so that CRLF line endings are preserved.
The Go project is supported on many different environments, some of
which may have limited git implementations available, or none at all.
Relying on fewer git features and special rules makes it easier to
have confidence in the exact content of all files. Additionally, Go
development started in Subversion, moved to Perforce, then Mercurial,
and now uses Git.¹ Reducing its reliance on git-specific features will
help if there will be another transition in the project's future.
There are only 5 .bat files in the entire Go source tree, so a new one
being added is a rare event, and we prefer to do things in Go instead.
We still have the option of improving the experience for developers by
adding a pre-commit converter for .bat files to the git-codereview tool.
¹ https://groups.google.com/d/msg/golang-dev/sckirqOWepg/YmyT7dWJiocJFixes#39391.
For #37791.
Change-Id: I6e202216322872f0307ac96f1b8d3f57cb901e6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/236437
Reviewed-by: Bryan C. Mills <bcmills@google.com>
I had a look at the changes between 1.14 and master, and these are the
only two that seem relevant enough for the changelog.
There was also CL 179337 to reuse values when decoding map elements, but
it got reverted in CL 234559 and is not being included in 1.15.
Updates #37419.
Change-Id: Ib125415a953471ce29553a413d85aaf4b18a7a12
Reviewed-on: https://go-review.googlesource.com/c/go/+/236523
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
There's been plenty of discussion on the usage of these terms in tech.
I'm not trying to have yet another debate. It's clear that there are
people who are hurt by them and who are made to feel unwelcome by their
use due not to technical reasons but to their historical and social
context. That's simply enough reason to replace them.
Anyway, allowlist and blocklist are more self-explanatory than whitelist
and blacklist, so this change has negative cost.
Didn't change vendored, bundled, and minified files. Nearly all changes
are tests or comments, with a couple renames in cmd/link and cmd/oldlink
which are extremely safe. This should be fine to land during the freeze
without even asking for an exception.
Change-Id: I8fc54a3c8f9cc1973b710bbb9558a9e45810b896
Reviewed-on: https://go-review.googlesource.com/c/go/+/236857
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Khosrow Moossavi <khos2ow@gmail.com>
Reviewed-by: Leigh McCulloch <leighmcc@gmail.com>
Reviewed-by: Urban Ishimwe <urbainishimwe@gmail.com>
Use the "Core library -> runtime" section for changes that affect the
runtime package API and use the top-level "Runtime" section for
package-independent behavior changes. Also, move the one change that's
really about os (and net) into the "os" package section and reword it
to be more accurate.
Updates #37419.
Change-Id: I32896b039f29ac67308badd0d0b36e8c6e39f64f
Reviewed-on: https://go-review.googlesource.com/c/go/+/236718
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The TODO was added durring the initial creation of the document.
In the current location, it makes it seem like the tzdata documents
are incomplete when they are complete. It is understood that the
entire Core library section will be a work in progress until the release.
For #37419
Change-Id: Ic857eb0ec2583781c701985ea62e519e9d940090
Reviewed-on: https://go-review.googlesource.com/c/go/+/236760
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Merge conflicts are mostly recently changed nm/objdump output
format and its tests. Resolved easily (mostly just using the
format on master branch).
Change-Id: I99d8410a9a02947ecf027d9cae5762861562baf5
The current contributor documentation is tailored towards contributors
to golang/go, but we have a number of increasingly popular x/ repos.
In this CL, I tried to generalize the language to make it apply to any
repository.
Also, I fixed an old link I noticed in editors.html.
Change-Id: Id9d8e448262ed8c3a67f49be5d554ca29df9d3c1
Reviewed-on: https://go-review.googlesource.com/c/go/+/234899
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This change makes the direct call darwin loadSystemRoots implementation
match the existing cgo implementation, which in turn _mostly_ matches
the Apple implementation. The main change here is that when
SecTrustSettingsCopyTrustSettings the error is ignored, and can either
cause a fallback to check admin trust settings, or cause the
certificate to be marked kSecTrustSettingsResultUnspecified.
As well as updating the implementation to match the cgo one, this
change also updates the documentation of how the fallbacks work and
how they match the Apple implementations. References are made to the
Apple source where appropriate. This change does not update the
existing comments in the cgo implementation, since the goal is to
delete that code once the direct call implementation is matured.
Updates #38888
Change-Id: Id0344ea9d2eede3b715f341e9cbd3c1c661b7a90
Reviewed-on: https://go-review.googlesource.com/c/go/+/233360
Run-TryBot: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
The ConnectionState's CipherSuite was not set prior
to the VerifyConnection callback in TLS 1.2 servers,
both for full handshakes and resumptions.
Change-Id: Iab91783eff84d1b42ca09c8df08e07861e18da30
Reviewed-on: https://go-review.googlesource.com/c/go/+/236558
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Instead of using container/heap package, implement a simple
specialized heap algorithm for the work queue in the deadcode
pass, to avoid allocations and function pointer calls.
Linking cmd/compile,
name old time/op new time/op delta
Deadcode_GC 59.8ms ± 4% 42.2ms ± 4% -29.45% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
Deadcode_GC 3.53MB ± 0% 2.10MB ± 0% -40.57% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
Deadcode_GC 187k ± 0% 8k ± 0% -95.48% (p=0.008 n=5+5)
Change-Id: Ibb21801d5b8e4a7eaf429856702e02720cd1772f
Reviewed-on: https://go-review.googlesource.com/c/go/+/236565
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Currently, in the deadcode pass, when checking whether a defined
method satisfies an interface, it compares the string
representation of the defined method and the interface method.
In fact, it can simply compare the method name and the type
descriptor (as we do in runtime). Make it so.
Change-Id: Ideb2b2410e5eedcd20ac31e3af41f5499fc90225
Reviewed-on: https://go-review.googlesource.com/c/go/+/236564
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
There's a comment on the Syscall function that's supposed to be an
internal implementation note, but since it's not separated from the
function definition, it appears in godoc. Add a blank line to prevent
this.
Change-Id: Iba307f1cc3844689ec3c6d82c21d441852e35bca
Reviewed-on: https://go-review.googlesource.com/c/go/+/236561
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Now the compiler-generated fingerprint is a hash of the export
data. We don't need to hash it ourselves in the linker. And the
linker doesn't need to read export data at all.
Fixes#33820.
Change-Id: I54bf3ebfd0f0c72aa43a352d7b2e0575dd62970d
Reviewed-on: https://go-review.googlesource.com/c/go/+/236119
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Currently, the compiler generates a fingerprint for each package,
which is used by the linker for index consistency check.
When building plugin or shared object, currently the linker also
generates a hash, by hashing the export data. At run time, when
a package is referenced by multiple DSOs, this hash is compared
to ensure consistency.
It would be good if we can unify this two hashes. This way, the
linker doesn't need to read the export data (which is intended
for the compiler only, and is not always available for the
linker). The export data hash is sufficient for both purposes.
It is consistent with the current hash geneated by the linker.
And the export data includes indices for exported symbols, so its
hash can be used to catch index mismatches.
Updates #33820.
Change-Id: I2bc0d74930746f54c683a10dfd695d50ea3f5a38
Reviewed-on: https://go-review.googlesource.com/c/go/+/236118
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The existing documentation of WriteFile does not make it clear for
non-native English speakers that it will not change the permissions if
the file already exists before.
Fixes#35711
Change-Id: If861c3e3700957fc9ac3d5313351c57d399d3f58
Reviewed-on: https://go-review.googlesource.com/c/go/+/218417
Reviewed-by: Rob Pike <r@golang.org>
Add interfaces which differ in type. Those used so far only
differ in value, not type.
These additional tests are needed to generate a failure
before CL 236278 went in.
Update #8606
Change-Id: Icdb7647b1973c2fff7e5afe2bd8b8c1b384f583e
Reviewed-on: https://go-review.googlesource.com/c/go/+/236418
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
"Fedora" and "Red Hat" are not numbers, it turns out.
Don't rely on version numbers, instead use a regexp to
handle variation across the 2 patterns thus far observed
for gdb-generated Go type names.
Change-Id: I18c81aa2848265a47daf1180d8f6678566ae3f19
Reviewed-on: https://go-review.googlesource.com/c/go/+/236280
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, for symbols defined in other packages and referenced
by index, we don't record its name in the object file, as the
linker doesn't need the name, only the index. As a consequence,
tools like objdump and nm also don't know the referenced symbol
names and cannot dump it properly.
This CL adds referenced symbol names to the object file. So the
object file is self-contained. And tools can retrieve referenced
symbol names properly.
Tools now should work as good for new object files as for old
object files.
Fixes#38875.
Change-Id: I16c685c1fd83273ab1faef474e19acf4af46396f
Reviewed-on: https://go-review.googlesource.com/c/go/+/236168
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This reverts CL 229246.
For new indexed object files, in CL 229246 we added symbol index
to tools (nm, objdump) output. This affects external tools that
parse those outputs. And the added index doesn't look very nice.
In this release we take it out. For future releases we may
introduce a flag to tools (nm, objdump) and optionally dump the
symbol index.
For refererenced (not defined) indexed symbols, currently the
symbol is still referenced only by index, not by name. The next
CL will make the object file self-contained, so tools can dump
the symbol names properly (as before).
For #38875.
Change-Id: I07375e85a8e826e15c82fa452d11f0eaf8535a00
Reviewed-on: https://go-review.googlesource.com/c/go/+/236167
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Add a blurb to the release notes mentioning that the
linker now supports DWARF generation for -buildmode=plugin,
and that plugin builds work now for freebsd/amd64.
Updates #37419.
Change-Id: I84da7a52af84a9d765f73ca7ea525e7af8d64f05
Reviewed-on: https://go-review.googlesource.com/c/go/+/236162
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Hand-verified for listed gdb versions. Gdb (apparently)
changed the way it names certain Go types, and this change
broke the pretty-printer-activating code in runtime-gdb.py
runtime-gdb_test.go now checks channel, map, string, and slice
printing unconditionally (i.e., no opt-out for old versions).
Updates #39368.
Change-Id: I98d72e1291c66bd40d970990e1a377ff2ed0c5d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/236164
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The current document mismatches Go syntax loads a signed-byte
instruction "MOVB" with GNU syntax loads an 64bit double-word
instruction "ldr". This is just a typo in the document, the
assembler has the correct encoding. This patch fix this error.
Fixes#39367
Change-Id: Idb8f65ca540514ee5bc8f07073e756838710ba93
Reviewed-on: https://go-review.googlesource.com/c/go/+/236217
Reviewed-by: Cherry Zhang <cherryyz@google.com>
During DWARF line table emission in the linker, prior to issuing a
DW_LNE_end_sequence op to mark the end of the line table for a
compilation unit, advance the PC to produce an address beyond the last
text address in the unit (this is required by the DWARF standard).
Because of the way that GDB interprets end-sequence ops, we were
effectively losing the last row in the line table for each unit, which
degraded the debugging experience.
This problem has been around for a while, but has surfaced recently
due to changes in line table generation. Prior to Go 1.14, the DWARF
line table was emitted entirely in the linker, and a single monolithic
line table was created for each Go package (including functions from
assembly). In 1.14 we moved to having the compiler emit line table
fragments for each function, and having the linker stitch together the
fragments. As part of this change we moved to a model in which each
"go tool compile/asm" output has its own DWARF line table instance,
meaning that there are many more "end sequence" ops, which made the
problem more visible.
Fixes#38192.
Change-Id: Ic29e2f6e0ac952360c81fcba5268ad70b2b44184
Reviewed-on: https://go-review.googlesource.com/c/go/+/235739
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Previously we did not steal timers from running P's, because that P
should be responsible for running its own timers. However, if the P
is running a CPU-bound G, this can cause measurable delays in running
ready timers. Also, in CL 214185 we avoided taking the timer lock of a P
with no ready timers, which reduces the chances of timer lock contention.
So, if we can't find any ready timers on sleeping P's, try stealing
them from running P's.
Fixes#38860
Change-Id: I0bf1d5dc56258838bdacccbf89493524e23d7fed
Reviewed-on: https://go-review.googlesource.com/c/go/+/232199
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The existing documentation for time format constants doesn't mention
that they may parse technically-invalid strings, such as single-digit
hours when a two-digit hour is required by a specification. This commit
adds a short warning note to that effect.
Fixes#37616
Change-Id: I6e5e12bd42dc368f8ca542b4c0527a2b7d30acaf
Reviewed-on: https://go-review.googlesource.com/c/go/+/229460
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
"Something" changed the names of types in gdb, causing the
pretty-printer matchers to fail to match. This tracks that
change.
Updated runtime-gdb_test.go to include a slice and a channel printing test.
(The straightforward printing of a slicevar doesn't work because
of compiler DWARF problems describing the slicevar, not gdb problems).
Change-Id: I21607a955b9c894f11ecf3763aea2a6dd59a3f42
Reviewed-on: https://go-review.googlesource.com/c/go/+/235926
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This change adds a comment to the Verify documentation that indicates
that you can use URI and email style name constraints with a leading
period for DNS names (and explains what they do). This behavior is
not standards compliant, but matches the community application of
RFC 5280, so it makes sense to document it.
Fixes#37535
Change-Id: Ibd6f039e4fa46d40ad7ae1ab48eab86f13cf8eff
Reviewed-on: https://go-review.googlesource.com/c/go/+/233525
Reviewed-by: Ryan Sleevi <sleevi@google.com>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
There are data races on fd.[rw]aio and fd.[rw]timedout when Read/Write
is called on a polled fd concurrently with SetDeadline (see #38769).
Adding a mutex around accesses to each pair (read and write) prevents
the race, which was causing deadlocks in net/http tests on the builders.
Updates #38769.
Change-Id: I31719b3c9a664e81a775cda583cff31c0da946c4
Reviewed-on: https://go-review.googlesource.com/c/go/+/235820
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
Call FlushViewOfFile before unmapping the output file, for extra
safety. The documentation says the function does not wait for
the data to be written to disk, so it should be cheap.
Fixes#38440.
Change-Id: I05352f15d9305e6e7086a002f61802f74036b710
Reviewed-on: https://go-review.googlesource.com/c/go/+/235639
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
The version "" denotes the main module, which has no version. The
mvs.Reqs interface documentation hints this is allowed, but it's not
obvious from the implementation in modload.mvsReqs.Max.
Also, replace a related TODO with a comment in mvs.Downgrade.
Fixes#39042
Change-Id: I11e10908c9b3d8c2283eaa5c04bd8e1b936851fd
Reviewed-on: https://go-review.googlesource.com/c/go/+/234003
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
When printing regular test output check the indentation of the output, and use
the report stack to find the appropriate test name for that output.
This change includes a whitespace change to some golden test files. The
indentation of tests was changed in CL 113177
from tabs to spaces. The golden files have been updated to match the new
output format. The tabs in the golden files cause problems because the indentation check
looks for 4 spaces.
Fixes#29755
Updates #25369
Change-Id: Iebab51816a9755168083a7a665b41497e9dfd85f
GitHub-Last-Rev: 898827f1a6
GitHub-Pull-Request: golang/go#34419
Reviewed-on: https://go-review.googlesource.com/c/go/+/196617
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This change fixes a race condition between beforeIdle waking up the
innermost event handler and a timer causing a different goroutine to
wake up at the exact same moment. This messes up the wasm event handling
and leads to memory corruption. The solution is to make beforeIdle
return the goroutine that must run next and have findrunnable pick
this goroutine without considering timers again.
Fixes#38093Fixes#38574
Change-Id: Iffbe99411d25c2730953d1c8b0741fd892f8e540
Reviewed-on: https://go-review.googlesource.com/c/go/+/230178
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When run with stdin == /dev/null and stdout/stderr == pipe (i.e., as
os/exec.Command.CombinedOutput), GDB suffers from a bug
(https://sourceware.org/bugzilla/show_bug.cgi?id=26056) that causes
SIGSEGV when sent a SIGWINCH signal.
Package runtime tests TestEINTR and TestSignalDuringExec both send
SIGWINCH signals to the entire process group, thus including GDB if one
of the GDB tests is running in parallel.
TestEINTR only intends its signals for the current process, so it is
changed to do so. TestSignalDuringExec, really does want its signals to
go to children. However, it does not call t.Parallel(), so it won't run
at the same time as GDB tests.
This is a simple fix, but GDB is vulnerable, so we must be careful not
to add new parallel tests that send SIGWINCH to the entire process
group.
Fixes#39021
Change-Id: I803606fb000f08c65c1b10ec554d4ef6819e5dd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/235557
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
CL 228017 added a new help page 'go help buildconstraint' which
summarized the information on build constraints in the go/build
documentation. The summary was almost as long as the go/build
documentation, since there's very little that can be left out.
This CL moves the original go/build documentation to
'go help buildconstraint' to eliminate redundnancy. The text
describing enabled tags is slightly different (targeting command-line
users more than go/build users), but the rest of the documentation is
unchanged.
Fixes#37018
Change-Id: Ic0ed4c6fdae2395dd58852e1600c701247c9c4cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/232981
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
In module mode, 'go get' prints a message for each version query it
resolves. This change groups those messages together near the end of
the output so they aren't mixed with other module "finding" and
"downloading" messages. They'll still be printed before build-related
messages.
Fixes#37982
Change-Id: I107a9f2b2f839e896399df906e20d6fc77f280c9
Reviewed-on: https://go-review.googlesource.com/c/go/+/232578
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
New test case for issue 38068, which deals with build reproducibility:
do a pair of compilations, the first with the concurrent back end
turned on, and the second with -c=1, then check to make sure we get
the same output (using a test case that triggers late inlining into
wrapper methods).
Updates #38068.
Change-Id: I4afaf78898706a66985f09d18f6f6f29876c9017
Reviewed-on: https://go-review.googlesource.com/c/go/+/234417
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
AddCookie properly encodes a cookie and appends it to the Cookie header
field but does not modify or sanitize what the Cookie header field
contains already. If a user manualy sets the Cookie header field to
something not conforming to RFC 6265 then a cookie added via AddCookie
might not be retrievable.
Fixes#38437
Change-Id: I232b64ac489b39bb962fe4f7dbdc2ae44fcc0514
Reviewed-on: https://go-review.googlesource.com/c/go/+/235141
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
fieldInfo.value used to initialize nil anonymous struct fields if they
were encountered. This behavior is wanted when decoding, but not when
encoding. When encoding, the value should never be modified, and these
nil fields should be skipped entirely.
To fix the bug, add a bool argument to the function which tells the
code whether we are encoding or decoding.
Finally, add a couple of tests to cover the edge cases pointed out in
the original issue.
Fixes#27240.
Change-Id: Ic97ae4bfe5f2062c8518e03d1dec07c3875e18f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/196809
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This reverts golang.org/cl/179337.
Reason for revert: broke a few too many reasonably valid Go programs.
The previous behavior was perhaps less consistent, but the docs were
never very clear about when the decoder merges with existing values,
versus replacing existing values altogether.
Fixes#39149.
Change-Id: I1c1d857709b8398969fe421aa962f6b62f91763a
Reviewed-on: https://go-review.googlesource.com/c/go/+/234559
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Previously, when the target (“old”) path passed to os.Symlink was a
“root-relative” Windows path,¹ we would erroneously prepend
destination (“new”) path when determining which path to Stat,
resulting in an invalid path which was then masked by the lack of
error propagation for the Stat call (#39183).
If the link target is a directory (rather than a file), that would
result in the symlink being created without the
SYMBOLIC_LINK_FLAG_DIRECTORY flag, which then fails in os.Open.
¹https://docs.microsoft.com/en-us/windows/win32/fileio/creating-symbolic-links
Updates #39183
Change-Id: I04f179cd2b0c44f984f34ec330acad2408aa3a20
Reviewed-on: https://go-review.googlesource.com/c/go/+/235317
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When go115ReduceLiveness is true (so we don't emit actual
register maps), use StackMapDontCare consistently for the
register map index, so RegMapValid is always false.
This fixes a compiler crash when doing -live=2 debug print.
Fixes#39251.
Change-Id: Ice087af491fa69c413f8ee59f923b72d592c0643
Reviewed-on: https://go-review.googlesource.com/c/go/+/235418
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The paths for the other "go" commands in this file were fixed in CL 223741,
but this one was missed (and run.bat is not caught by the builders).
Change-Id: Iba1efddc7d2fbe6af39c39d643508decc954bbc5
Reviewed-on: https://go-review.googlesource.com/c/go/+/234758
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
In certain cases the HTTP/2 stack needs to resend a request.
It obtains a fresh body to send by calling req.GetBody.
This call was missing from the path where the HTTP/2
round tripper returns ErrSkipAltProtocol, meaning fall back
to HTTP/1.1. The result was that the HTTP/1.1 fallback
request was sent with no body at all.
This CL changes that code path to rewind the body before
falling back to HTTP/1.1. But rewinding the body is easier
said than done. Some requests have no GetBody function,
meaning the body can't be rewound. If we need to rewind and
can't, that's an error. But if we didn't read anything, we don't
need to rewind. So we have to track whether we read anything,
with a new ReadCloser wrapper. That in turn requires adding
to the couple places that unwrap Body values to look at the
underlying implementation.
This CL adds the new rewinding code in the main retry loop
as well.
The new rewindBody function also takes care of closing the
old body before abandoning it. That was missing in the old
rewind code.
Thanks to Aleksandr Razumov for CL 210123
and to Jun Chen for CL 234358, both of which informed
this CL.
Fixes#32441.
Change-Id: Id183758526c087c6b179ab73cf3b61ed23a2a46a
Reviewed-on: https://go-review.googlesource.com/c/go/+/234894
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
All GDB tests currently ignore non-zero exit statuses. When tests
flakes, we don't even know if GDB exited successfully or not.
Add checks for non-zero exits, which are not expected.
Furthermore, always log the output from GDB. The tests are currently
inconsistent about whether they always log, or only on error.
Updates #39021
Change-Id: I7af1d795fc2fdf58093cb2731d616d4aa44e9996
Reviewed-on: https://go-review.googlesource.com/c/go/+/235282
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When the output file is mmap'd, OutBuf.Close currently munmap the
file but doesn't actually close the file descriptor. This CL
makes it actually close the FD.
Change-Id: I053c5592ae95497228c50ce6a267b3b48f0af6d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/235417
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
If GOPROXY is "", we set it to the default value,
"https://proxy.golang.org,direct". However, if GOPROXY is a non-empty
string that doesn't contain any URLs or keywords, we treat it as
either "off" or "noproxy", which can lead to some strange errors.
This change reports an error for this kind of GOPROXY value.
For #39180
Change-Id: If2e6e39d6f74c708e5ec8f90e9d4880e0e91894f
Reviewed-on: https://go-review.googlesource.com/c/go/+/234857
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
This fixes a bug in CL 228777 which disallowed
a MaxPathLen of -1 without IsCA, even though the
x509.Certificate documentation indicates that
MaxPathLen of -1 is considered "unset".
Updates #38216
Change-Id: Ib7240e00408d060f27567be8b820d0eee239256f
Reviewed-on: https://go-review.googlesource.com/c/go/+/235280
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Background: when compiling a function, it's possible that a local
variable will be optimized away, which could potentially degrade the
debugging experience if the compiler fails to emit DWARF information
for the variable's type. To mitigate this situation, the compiler
emits R_USETYPE relocations for the function's auto/param variables as
a signal to the linker to generate DWARF for the types in question,
even if the type is not specifically attached to a DWARF param or var.
This patch change the logic in the compiler to avoid emitting a
R_USETYPE relocation if the type in question is already referenced by
a concrete DWARF param or auto record. This cuts down on the amount of
work the linker has to do, also makes object files a bit smaller on
average (about 1% for the runtime package).
Change-Id: I4d24da458d0658edf90c5dca0bf21d5ddc3961d8
Reviewed-on: https://go-review.googlesource.com/c/go/+/234837
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Rework the code in the linker that visits DWARF subprorgam DIEs to
reduce number of symbol name instantiations and name lookups, by
making better use of relocation target symbol types.
Change-Id: Ifb2a4e24874b8c891d7fdf17dd749c3f9139157a
Reviewed-on: https://go-review.googlesource.com/c/go/+/234685
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This change splits the SDWARFINFO symbol type (a generic container of
DWARF content) into separate sub-classes. The new symbol types are
SDWARFCUINFO comp unit DIE, also CU info and CU packagename syms
SDWARFCONST constant DIE
SDWARFFCN subprogram DIE (default and concrete)
SDWARFABSFCN abstract function DIE
SDWARFTYPE type DIE
SDWARFVAR global variable DIE
Advantage of doing this: in the linker there are several places where
we have to iterate over a symbol's relocations to pick out references
to specific classes of DWARF sub-symbols (for example, looking for all
abstract function DIEs referenced by a subprogram DIE, or looking at
all the type DIEs used in a subprogram DIE). By splitting SDWARFINFO
into parts clients can now look only at the relocation target's sym
type as opposed to having to materialize the target sym name, or do a
lookup.
Change-Id: I4e0ee3216d3c8f1a78bec3d296c01e95b3d025b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/234684
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Add two no op instructions following svc on openbsd/arm64 and swi on openbsd/arm.
All except some of the most recent arm64 processors have a speculative execution
flaw that occurs across a syscall boundary, which cannot be mitigated in the
kernel. In order to protect against this leak a speculation barrier needs to be
placed after an svc or swi instruction.
In order to avoid the performance impact of these instructions, the OpenBSD 6.7
kernel returns execution two instructions past the svc or swi call. For now two
hardware no ops are added, which allows syscalls to work with both 6.6 and 6.7.
These should be replaced with real speculation barriers once OpenBSD 6.8 is
released.
Updates #36435
Change-Id: I06153cb0998199242cca8761450e53599c3e7de4
Reviewed-on: https://go-review.googlesource.com/c/go/+/234381
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 235017 is about to change the default Android linker to lld. lld doesn't
support the --compress-debug-sections=zlib-gnu flag, but linkerFlagSupported
doesn't take any alternative linkers specified with -fuse-ld into account.
Updates #38838
Change-Id: I5f7422c06d40dedde2e4b070fc48398e8f822190
Reviewed-on: https://go-review.googlesource.com/c/go/+/235157
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The parallel chatty tests added in CL 229085 fail on the
solaris-amd64-oraclerel builder, because a +NN:NN offset time zone is
used. Allow for the `+` character in the corresponding regex to fix
these tests. Also move the '-' to the end of the character class, so it
is not interpreted as the range 9-T.
Change-Id: Iec9ae82ba45d2490176f274f0dc6812666eae718
Reviewed-on: https://go-review.googlesource.com/c/go/+/234978
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Specifically, this change documents the behavior of Unmarshal when a
SEQUENCE contains trailing elements.
For context Unmarshal treats trailing elements of a SEQUENCE that do not
have matching struct fields as valid, as this is how ASN.1 structures
are typically extended. This can be somewhat confusing as you might
expect those elements to be appended to rest, but rest is really only
for trailing data unrelated to the structure being parsed (i.e. if you
append a second sequence to b, it would be returned in rest).
Fixes#35680
Change-Id: Ia2c68b2f7d8674d09e859b4b7f9aff327da26fa0
Reviewed-on: https://go-review.googlesource.com/c/go/+/233537
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
The existing example is needlessly complex.
You have to know that t.Sub returns a Duration
and also have to mentally subtract the two times
to understand what duration should be printed.
Rewrite to focus on just the Duration.String operation.
Change-Id: I00765b6019c07a6ff03022625b556c2b9ba87c09
Reviewed-on: https://go-review.googlesource.com/c/go/+/234893
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A zombie slot is a slot that is marked, but isn't allocated. This can
indicate a bug in the GC, or a bad use of unsafe.Pointer. Currently,
the sweeper has best-effort detection for zombie slots: if there are
more marked slots than allocated slots, then there must have been a
zombie slot. However, this is imprecise since it only compares totals
and it reports almost no information that may be helpful to debug the
issue.
Add a precise check that compares the mark and allocation bitmaps and
reports detailed information if it detects a zombie slot.
No appreciable effect on performance as measured by the sweet
benchmarks:
name old time/op new time/op delta
BiogoIgor 15.8s ± 2% 15.8s ± 2% ~ (p=0.421 n=24+25)
BiogoKrishna 15.6s ± 2% 15.8s ± 5% ~ (p=0.082 n=22+23)
BleveIndexBatch100 4.90s ± 3% 4.88s ± 2% ~ (p=0.627 n=25+24)
CompileTemplate 204ms ± 1% 205ms ± 0% +0.22% (p=0.010 n=24+23)
CompileUnicode 77.8ms ± 2% 78.0ms ± 1% ~ (p=0.236 n=25+24)
CompileGoTypes 729ms ± 0% 731ms ± 0% +0.26% (p=0.000 n=24+24)
CompileCompiler 3.52s ± 0% 3.52s ± 1% ~ (p=0.152 n=25+25)
CompileSSA 8.06s ± 1% 8.05s ± 0% ~ (p=0.192 n=25+24)
CompileFlate 132ms ± 1% 132ms ± 1% ~ (p=0.373 n=24+24)
CompileGoParser 163ms ± 1% 164ms ± 1% +0.32% (p=0.003 n=24+25)
CompileReflect 453ms ± 1% 455ms ± 1% +0.39% (p=0.000 n=22+22)
CompileTar 181ms ± 1% 181ms ± 1% +0.20% (p=0.029 n=24+21)
CompileXML 244ms ± 1% 244ms ± 1% ~ (p=0.065 n=24+24)
CompileStdCmd 15.8s ± 2% 15.7s ± 2% ~ (p=0.059 n=23+24)
FoglemanFauxGLRenderRotateBoat 13.4s ±11% 12.8s ± 0% ~ (p=0.377 n=25+24)
FoglemanPathTraceRenderGopherIter1 18.6s ± 0% 18.6s ± 0% ~ (p=0.696 n=23+24)
GopherLuaKNucleotide 28.7s ± 4% 28.6s ± 5% ~ (p=0.700 n=25+25)
MarkdownRenderXHTML 250ms ± 1% 248ms ± 1% -1.01% (p=0.000 n=24+24)
[Geo mean] 1.60s 1.60s -0.11%
(https://perf.golang.org/search?q=upload:20200517.6)
For #38702.
Change-Id: I8af1fefd5fbf7b9cb665b98f9c4b73d1d08eea81
Reviewed-on: https://go-review.googlesource.com/c/go/+/234100
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The go/build package uses the "go" tool from the user's environment,
but its tests should not assume that that tool is in any particular
state, let alone appropriate for running the test.
Instead, explicitly use testenv.GoTool, adding it to $PATH in a
TestMain when necessary.
Fixes#39199Fixes#39198
Change-Id: I56618a55ced473e75dd96eeb3a8f7084e2e64d02
Reviewed-on: https://go-review.googlesource.com/c/go/+/234880
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
When a locked M wants to start a new M, it hands off to the template
thread to actually call clone and start the thread. The template thread
is lazily created the first time a thread is locked (or if cgo is in
use).
stoplockedm will release the P (_Pidle), then call handoffp to give the
P to another M. In the case of a pending STW, one of two things can
happen:
1. handoffp starts an M, which does acquirep followed by schedule, which
will finally enter _Pgcstop.
2. handoffp immediately enters _Pgcstop. This only occurs if the P has
no local work, GC work, and no spinning M is required.
If handoffp starts an M, and must create a new M to do so, then newm
will simply queue the M on newmHandoff for the template thread to do the
clone.
When a stop-the-world is required, stopTheWorldWithSema will start the
stop and then wait for all Ps to enter _Pgcstop. If the template thread
is not fully created because startTemplateThread gets stopped, then
another stoplockedm may queue an M that will never get created, and the
handoff P will never leave _Pidle. Thus stopTheWorldWithSema will wait
forever.
A sequence to trigger this hang when STW occurs can be visualized with
two threads:
T1 T2
------------------------------- -----------------------------
LockOSThread LockOSThread
haveTemplateThread == 0
startTemplateThread
haveTemplateThread = 1
newm haveTemplateThread == 1
preempt -> schedule g.m.lockedExt++
gcstopm -> _Pgcstop g.m.lockedg = ...
park g.lockedm = ...
return
... (any code)
preempt -> schedule
stoplockedm
releasep -> _Pidle
handoffp
startm (first 3 handoffp cases)
newm
g.m.lockedExt != 0
Add to newmHandoff, return
park
Note that the P in T2 is stuck sitting in _Pidle. Since the template
thread isn't running, the new M will not be started complete the
transition to _Pgcstop.
To resolve this, we disable preemption around the assignment of
haveTemplateThread and the creation of the template thread in order to
guarantee that if handTemplateThread is set then the template thread
will eventually exist, in the presence of stops.
Fixes#38931
Change-Id: I50535fbbe2f328f47b18e24d9030136719274191
Reviewed-on: https://go-review.googlesource.com/c/go/+/232978
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In #24929, we decided to stream chatty test output. It looks like,
foo_test.go:138: TestFoo/sub-1: hello from subtest 1
foo_test.go:138: TestFoo/sub-2: hello from subtest 2
In this CL, we refactor the output to be grouped by === CONT lines, preserving
the old test-file-before-log-line behavior:
=== CONT TestFoo/sub-1
foo_test.go:138 hello from subtest 1
=== CONT TestFoo/sub-2
foo_test.go:138 hello from subtest 2
This should remove a layer of verbosity from tests, and make it easier to group
together related lines. It also returns to a more familiar format (the
pre-streaming format), whilst still preserving the streaming feature.
Fixes#38458
Change-Id: Iaef94c580d69cdd541b2ef055aa004f50d72d078
Reviewed-on: https://go-review.googlesource.com/c/go/+/229085
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Currently sysmon is not stopped when the world is stopped, which is
in general a difficult thing to do. The result of this is that when
tracing starts and the value of trace.enabled changes, it's possible
for sysmon to fail to emit an event when it really should. This leads to
traces which the execution trace parser deems inconsistent.
Fix this by putting all of sysmon's work behind a new lock sysmonlock.
StartTrace and StopTrace both acquire this lock after stopping the world
but before performing any work in order to ensure sysmon sees the
required state change in tracing. This change is expected to slow down
StartTrace and StopTrace, but will help ensure consistent traces are
generated.
Updates #29707.
Fixes#38794.
Change-Id: I64c58e7c3fd173cd5281ffc208d6db24ff6c0284
Reviewed-on: https://go-review.googlesource.com/c/go/+/234617
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
On darwin, we preallocate file storage space with fcntl
F_ALLOCATEALL in F_PEOFPOSMODE mode. This is specified as
allocating from the physical end of the file. So the size we give
it should be the increment, instead of the total size.
Fixes#39044.
Change-Id: I10c7ee8d51f237b4a7604233ac7abc6f91dcd602
Reviewed-on: https://go-review.googlesource.com/c/go/+/234481
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
When the concurrent back end is not enabled, it is possible to have a
scenario where: we compile a specific inlinable non-pointer-receiver
method T.M, then at some point later on in the compilation we visit a
type that triggers generation of a pointer-receiver wrapper (*T).M,
which then results in an inline of T.M into (*T).M. This introduces
subtle differences in the DWARF as compared with when the concurrent
back end is enabled (in the concurrent case, by the time we run the
SSA back end on T.M is is marked as being inlined, whereas in the
non-current case it is not marked inlined).
As a fix, at the point where we would normally compile a given
function in the xtop list right away, if the function is a method AND
is inlinable AND hasn't been inlined, then delay its compilation until
compileFunctions (so as to make sure that when we do compile it, all
possible inlining has been complete). In addition, make sure that
the abstract function symbol for the inlined function gets recorded
correctly.
Fixes#38068.
Change-Id: I57410ab5658bd4ee5b4b80750518e9b20fd6ba52
Reviewed-on: https://go-review.googlesource.com/c/go/+/234178
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
modfetch.TryProxies ranks errors returned by GOPROXY entries by
usefulness. It returns the error of the highest rank from the last
proxy. Errors from "direct" and "noproxy" are most useful, followed by
errors other than ErrNotExist, followed by ErrNotExist.
This change ranks errUseProxy with ErrNotExist even though it's
reported by "noproxy". There is almost always a more useful message
than "path does not match GOPRIVATE/GONOPROXY".
Fixes#39180
Change-Id: Ifa5b96462d7bf411e6d2d951888465c839d42471
Reviewed-on: https://go-review.googlesource.com/c/go/+/234687
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When copying a stack, we
1. allocate a new stack,
2. adjust pointers pointing to the old stack to pointing to the
new stack.
If the GC is running on another thread concurrently, on a machine
with weak memory model, the GC could observe the adjusted pointer
(e.g. through gp._defer which could be a special heap-to-stack
pointer), but not observe the publish of the new stack span. In
this case, the GC will see the adjusted pointer pointing to an
unallocated span, and throw. Fixing this by adding a publication
barrier between the allocation of the span and adjusting pointers.
One testcase for this is TestDeferHeapAndStack in long mode. It
fails reliably on linux-mips64le-mengzhuo builder without the fix,
and passes reliably after the fix.
Fixes#35541.
Change-Id: I82b09b824fdf14be7336a9ee853f56dec1b13b90
Reviewed-on: https://go-review.googlesource.com/c/go/+/234478
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
On Windows, calling syscall.Open(file, O_CREAT|O_TRUNC, 0) for a file
that already exists would change the file to be read-only.
That is not how the Unix syscall.Open behaves, so avoid it on
Windows by calling CreateFile twice if necessary.
Fixes#38225
Change-Id: I70097fca8863df427cc8a97b9376a9ffc69c6318
Reviewed-on: https://go-review.googlesource.com/c/go/+/234534
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
This removes the GOAMD64 environment variable and its documentation.
The value is instead supplied by a compiled-in constant.
Note that function alignment is also dependent on the value of
the (removed) flag; it is 32 for aligned jumps, 16 if not.
When the flag-dependent logic is removed, it will be 32.
Updates #35881.
Change-Id: Ic41c0b9833d2e8a31fa3ce8067d92aa2f165bf72
Reviewed-on: https://go-review.googlesource.com/c/go/+/231600
Reviewed-by: Austin Clements <austin@google.com>
This will hopefully address the occasional "runtime: out of memory"
failures observed on the openbsd-arm-jsing builder:
https://build.golang.org/log/c296d866e5d99ba401b18c1a2ff3e4d480e5238c
Also make the "spin" and "winch" loops concurrent instead of
sequential to cut down the test's running time.
Finally, change Block to coordinate by closing stdin instead of
sending SIGINT. The SIGINT handler wasn't necessarily registered by
the time the signal was sent.
Updates #20400
Updates #39043
Change-Id: Ie12fc75b87e33847dc25a12edb4126db27492da6
Reviewed-on: https://go-review.googlesource.com/c/go/+/234538
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently in (*addrRanges).removeGreaterEqual we use
(addrRange).subtract with a range from specified address to "infinity"
which is supposed to be maxOffAddr. However, maxOffAddr is necessarily
an inclusive bound on the address space, because on many platforms an
exclusive bound would overflow back to 0.
On some platforms like mips and mipsle, the address space is smaller
than what's representable in a pointer, so if there's a range which hits
the top of the address space (such as in the pageAlloc tests), the limit
doesn't overflow, but maxOffAddr is inclusive, so any attempt to prune
this range with (*addrRange).removeGreaterEqual causes a failure, since
the range passed to subtract is contained within the address range which
touches the top of the address space.
Another problem with using subtract here is that addr and
maxOffAddr.addr() may not be in the same segment which could cause
makeAddrRange to panic. While this unlikely to happen, on some platforms
such as Solaris it is possible.
Fix these issues by not using subtract at all. Create a specific
implementation of (addrRange).removeGreaterEqual which side-steps all of
this by not having to worry about the top of the address space at all.
Fixes#39128.
Change-Id: Icd5b587b1a3d32a5681fb76cec4c001401f5756f
Reviewed-on: https://go-review.googlesource.com/c/go/+/234457
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In CL 231958, TempDir was changed to create a new temp directory on
each allocation, on the theory that it is easy to save in a variable
for callers that want the same directory repeatedly. Apply that
transformation here.
Updates #38850
Change-Id: Ibb014095426c33038e0a2c95303579cf95d5c3ba
Reviewed-on: https://go-review.googlesource.com/c/go/+/234582
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We use a single parent directory for all temporary directories
created by a test so they're all kept together.
Fixes#38850
Change-Id: If8edae10c5136efcbcf6fd632487d198b9e3a868
Reviewed-on: https://go-review.googlesource.com/c/go/+/231958
Reviewed-by: Russ Cox <rsc@golang.org>
Fold the descriptions of testing.T.Deadline and TestMain related changes
into the existing section for package testing.
Also link T.Deadline to its godoc.
Change-Id: I732c45fb879305099cb8a51a77ef11fba1b2f1e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/234557
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Most Go objects are compiled with known package path, so the
symbol name is already fully expanded. Nevertheless, currently
in the linker strings.Replace is called unconditionally, and most
of the time it doesn't do anything.
This CL records a per-object flag in the object file, and do the
name expansion only when the name is not expanded at compile time.
This gives small speedups for the linker. Linking cmd/compile:
name old time/op new time/op delta
Loadlib 35.1ms ± 2% 32.8ms ± 4% -6.43% (p=0.008 n=5+5)
Symtab 15.8ms ± 2% 14.0ms ± 8% -11.45% (p=0.008 n=5+5)
TotalTime 399ms ± 1% 385ms ± 2% -3.63% (p=0.008 n=5+5)
Change-Id: I735084971a051cd9be4284ad294c284cd5b545f4
Reviewed-on: https://go-review.googlesource.com/c/go/+/234490
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This was causing issues when fuzzing with
TestMarshalUnmarshal since the test would
occassionally set the version to VersionTLS13,
which would fail when unmarshaling. The check
doesn't add much in practice, and there is no
harm in removing it to de-flake the test.
Fixes#38902
Change-Id: I0906c570e9ed69c85fdd2c15f1b52f9e372c62e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/234486
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
v0.3.0 is a tag on 859b3ef565e2, the version that was already being
used. This change is a no-op, except for letting us use a release
version instead of a pseudo-version.
For #36905
Change-Id: I70b8ce2a3f1451f5602c469501362d7a6a673b12
Reviewed-on: https://go-review.googlesource.com/c/go/+/234002
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
The Plan 9 runtime startup was enabling notes (like Unix signals)
before the gsignal stack was allocated. This left a small window
of time where an interrupt (eg by the parent killing a subprocess
quickly after exec) would cause a null pointer dereference in
sigtramp. This would leave the interrupted process suspended in
'broken' state instead of exiting. We've observed this on the
builders, where it can make a test time out waiting for the broken
process to terminate.
Updates #38772
Change-Id: I54584069fd3109595f06c78724c1f6419e028aab
Reviewed-on: https://go-review.googlesource.com/c/go/+/234397
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
The runtime needs to find the PC of the deferreturn call in a few
places. So for functions that have defer, we record the PC of
deferreturn call in its funcdata.
For very large binaries, the deferreturn call could be made
through a trampoline. The current code of finding deferreturn PC
fails in this case. This CL handles the trampoline as well.
Fixes#39049.
Change-Id: I929be54d6ae436f5294013793217dc2a35f080d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/234105
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This deletes all sym.Symbol and sym.Reloc references. This is
certainly not complete, and there are more cleanups to do. But I
feel this makes a good first round.
Change-Id: I7621d016957f7ef114be5f0606fcb3ad6aee71c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/234097
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Currently, for the special field tracking symbol go.track.XXX,
when they are reachable, we set its type to SCONST. There is no
need to do that. Just leave it unset (as Sxxx). The symbol is
done after this point.
Change-Id: I966d80775008f7fb5d30fbc6b9e4a30ae8316b6c
Reviewed-on: https://go-review.googlesource.com/c/go/+/233998
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Don't include SCONST symbols in the symbol table when
NotInSymbolTable is set. This is what the old code (genasmsym)
does.
In fact, SCONST symbol is only emitted by the field tracking
code, and is always NotInSymbolTable. So we should just not
include them at all, or not generate SCONST symbols at all. But
at this late stage I'll just restore the old behavior.
Change-Id: If6843003e16701d45b8c67b2297098a7babdec52
Reviewed-on: https://go-review.googlesource.com/c/go/+/233997
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently maxOffAddr is defined in terms of the whole 64-bit address
space, assuming that it's all supported, by using ^uintptr(0) as the
maximal address in the offset space. In reality, the maximal address in
the offset space is (1<<heapAddrBits)-1 because we don't have more than
that actually available to us on a given platform.
On most platforms this is fine, because arenaBaseOffset is just
connecting two segments of address space, but on AIX we use it as an
actual offset for the starting address of the available address space,
which is limited. This means using ^uintptr(0) as the maximal address in
the offset address space causes wrap-around, especially when we just
want to represent a range approximately like [addr, infinity), which
today we do by using maxOffAddr.
To fix this, we define maxOffAddr more appropriately, in terms of
(1<<heapAddrBits)-1.
This change also redefines arenaBaseOffset to not be the negation of the
virtual address corresponding to address zero in the virtual address
space, but instead directly as the virtual address corresponding to
zero. This matches the existing documentation more closely and makes the
logic around arenaBaseOffset decidedly simpler, especially when trying
to reason about its use on AIX.
Fixes#38966.
Change-Id: I1336e5036a39de846f64cc2d253e8536dee57611
Reviewed-on: https://go-review.googlesource.com/c/go/+/233497
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
When tuple generators and selectors are eliminated as part of the
CSE pass we may end up with tuple selectors that are in different
blocks to the tuple generators that they correspond to. This breaks
the invariant that tuple generators and their corresponding
selectors must be in the same block. Therefore after CSE this
situation must be corrected.
Unfortunately the fixup code did not take into account that selectors
could be eliminated by CSE. It assumed that only the tuple generators
could be eliminated. In some situations this meant that it got into
a state where it was replacing references to selectors with references
to dead selectors in the wrong block.
To fix this we move the fixup code after the CSE rewrites have been
applied. This removes any difficult-to-reason-about interactions
with the CSE rewriter.
Fixes#38916.
Change-Id: I2211982dcdba399d03299f0a819945b3eb93b291
Reviewed-on: https://go-review.googlesource.com/c/go/+/233857
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
- Avoid starting subprocesses when the test is already very close to
timing out. The overhead of starting and stopping processes may
cause the test to exceed its deadline even if each individual
process is signaled soon after it is started.
- If a command does not shut down quickly enough after receiving
os.Interrupt, send it os.Kill using the same style of grace period
as in CL 228438.
- Fail the test if a background command whose exit status is not
ignored is left running at the end of the test. We have no reliable
way to distinguish a failure due to the termination signal from an
unexpected failure, and the termination signal varies across
platforms (so may cause failure on one platform but success on
another).
For #38797
Change-Id: I767898cf551dca45579bf01a9d1bb312e12d6193
Reviewed-on: https://go-review.googlesource.com/c/go/+/233526
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Use uint32 consistently for local index (this is what the object
file uses).
Use a index, instead of a pointer, to refer to the object file.
This reduces memory usage and GC work.
This reduces some allocations. Linking cmd/compile,
name old alloc/op new alloc/op delta
Loadlib_GC 19.9MB ± 0% 16.9MB ± 0% -15.33% (p=0.008 n=5+5)
name old live-B new live-B delta
Loadlib_GC 12.6M ± 0% 11.3M ± 0% -9.97% (p=0.008 n=5+5)
Change-Id: I20ce60bbb6d31abd2e9e932bdf959e2ae840ab98
Reviewed-on: https://go-review.googlesource.com/c/go/+/233779
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
While reviewing CL 228784, I noticed that various filepath.WalkFunc
implementations within cmd/go were dropping non-nil errors.
Those errors turn out to be significant, at least in some cases: for
example, they can cause packages to appear to be missing when any
parent of the directory had the wrong permissions set.
(This also turned up a bug in the existing list_dedup_packages test,
which was accidentally passing a nonexistent directory instead of the
intended duplicate path.)
Change-Id: Ia09a0a33aa7a966d9f132d3747d6c674a5370b2d
Reviewed-on: https://go-review.googlesource.com/c/go/+/232579
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
- Don't assume that a process interrupted at 100μs intervals will have
enough remaining time to make progress. (Stop sending signals
in between signal storms to allow the process to quiesce.)
- Don't assume that a child process that spins for 1ms will block long
enough for the parent process to receive signals or make meaningful
progress. (Instead, have the child block indefinitely, and unblock
it explicitly after the signal storm.)
For #39043
Updates #22838
Updates #20400
Change-Id: I85cba23498c346a637e6cfe8684ca0c478562a93
Reviewed-on: https://go-review.googlesource.com/c/go/+/233877
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Remove the loader's PropagateSymbolChangesBackToLoader and
PropagateLoaderChangesToSymbols shim functions. These were used at one
point to enable conversion of phases in the linker that were
"downstream" of loadlibfull -- given the current wavefront position
there's not much point keeping them around.
Change-Id: I3f01f25b70b1b80240369c8f3a10dca89931610f
Reviewed-on: https://go-review.googlesource.com/c/go/+/233817
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Minor renaming cleanup to get rid of a couple of old sym.Symbol
adddynrel helpers and rename the current crop of adddynrel2
methods/functions back to adddynrel.
Change-Id: I67e76decff84d603ef765f3b6a0cd78c7f3743ec
Reviewed-on: https://go-review.googlesource.com/c/go/+/233523
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Adds in support for remaining architectures to the linker's ELF asmb2
path, along with deleting most of the older sym.Symbol based code.
Change-Id: I67c96525db72b7d6dd3187cf2b9f6faddc296291
Reviewed-on: https://go-review.googlesource.com/c/go/+/233362
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This patch converts the linker's Asmb2 phase to use loader APIs
for AMD64 (other architectures to be converted in a subsequent
patch).
Change-Id: I5a9aa9b03769cabc1a22b982f48fd113213d7bcf
Reviewed-on: https://go-review.googlesource.com/c/go/+/233338
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Historically we've assumed that we can install all signal handlers
with the SA_RESTART flag set, and let the system restart slow functions
if a signal is received. Therefore, we don't have to worry about EINTR.
This is only partially true, and we've added EINTR checks already for
connect, and open/read on Darwin, and sendfile on Solaris.
Other cases have turned up in #36644, #38033, and #38836.
Also, #20400 points out that when Go code is included in a C program,
the C program may install its own signal handlers without SA_RESTART.
In that case, Go code will see EINTR no matter what it does.
So, go ahead and check for EINTR. We don't check in the syscall package;
people using syscalls directly may want to check for EINTR themselves.
But we do check for EINTR in the higher level APIs in os and net,
and retry the system call if we see it.
This change looks safe, but of course we may be missing some cases
where we need to check for EINTR. As such cases turn up, we can add
tests to runtime/testdata/testprogcgo/eintr.go, and fix the code.
If there are any such cases, their handling after this change will be
no worse than it is today.
For #22838Fixes#20400Fixes#36644Fixes#38033Fixes#38836
Change-Id: I7e46ca8cafed0429c7a2386cc9edc9d9d47a6896
Reviewed-on: https://go-review.googlesource.com/c/go/+/232862
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Taking over Zach's CL 212277. Just cleaned up and added a test.
For a positive, signed integer, an arithmetic right shift of count
(bit-width - 1) equals zero. e.g. int64(22) >> 63 -> 0. This CL makes
prove replace these right shifts with a zero-valued constant.
These shifts may arise in source code explicitly, but can also be
created by the generic rewrite of signed division by a power of 2.
// Signed divide by power of 2.
// n / c = n >> log(c) if n >= 0
// = (n+c-1) >> log(c) if n < 0
// We conditionally add c-1 by adding n>>63>>(64-log(c))
(first shift signed, second shift unsigned).
(Div64 <t> n (Const64 [c])) && isPowerOfTwo(c) ->
(Rsh64x64
(Add64 <t> n (Rsh64Ux64 <t>
(Rsh64x64 <t> n (Const64 <typ.UInt64> [63]))
(Const64 <typ.UInt64> [64-log2(c)])))
(Const64 <typ.UInt64> [log2(c)]))
If n is known to be positive, this rewrite includes an extra Add and 2
extra Rsh. This CL will allow prove to replace one of the extra Rsh with
a 0. That replacement then allows lateopt to remove all the unneccesary
fixups from the generic rewrite.
There is a rewrite rule to handle this case directly:
(Div64 n (Const64 [c])) && isNonNegative(n) && isPowerOfTwo(c) ->
(Rsh64Ux64 n (Const64 <typ.UInt64> [log2(c)]))
But this implementation of isNonNegative really only handles constants
and a few special operations like len/cap. The division could be
handled if the factsTable version of isNonNegative were available.
Unfortunately, the first opt pass happens before prove even has a
chance to deduce the numerator is non-negative, so the generic rewrite
has already fired and created the extra Ops discussed above.
Fixes#36159
By Printf count, this zeroes 137 right shifts when building std and cmd.
Change-Id: Iab486910ac9d7cfb86ace2835456002732b384a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/232857
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
... and 0-31 for 32-bit shifts.
Generally update the docs for ppc64 shift instructions to be
clearer about what they actually do.
This issue is causing problems for the subsequent CL. The shift
amount was <0 and caused the assembler to report an invalid instruction.
Change-Id: I8c708a15e7f71931835e6e543d8db3c716186e52
Reviewed-on: https://go-review.googlesource.com/c/go/+/232858
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Old url 404s because the file no longer exists on master; change it to
point to the android 10 release branch.
Change-Id: If0f8b645f2c746f9fc8bbd68f4d1fe41868493ba
Reviewed-on: https://go-review.googlesource.com/c/go/+/232809
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Only enable broadcast on SOCK_DGRAM and SOCK_RAW sockets, SOCK_STREAM
and others don't support it.
Don't enable SO_BROADCAST on UNIX domain sockets as they don't support it.
This caused failures on WSL which strictly checks setsockopt calls
unlike other OSes which often silently ignore bad options.
Also return error for setsockopt call for SO_BROADCAST on Windows
matching all other platforms but for IPv4 only as it's not supported
on IPv6 as per:
https://docs.microsoft.com/en-us/windows/win32/winsock/socket-optionsFixes#38954
Change-Id: I0503fd1ce96102b17121af548b66b3e9c2bb80d3
Reviewed-on: https://go-review.googlesource.com/c/go/+/232807
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Before this commit, the code declares and assigns "n" with the result of
io.ReadFull() -- but the value is not used. The variable is then reused
later in the function.
This commit removes the first declaration of "n" and declares it closer
to where it is used.
Change-Id: I7ffe19a10f2a563c306bb6fe6562493435b9dc5a
Reviewed-on: https://go-review.googlesource.com/c/go/+/232917
Reviewed-by: Rob Pike <r@golang.org>
testing.M.Run has this bit of code:
if !flag.Parsed() {
flag.Parse()
}
It makes sense, and it's common knowledge for many Go developers that
test flags are automatically parsed by the time tests and benchmarks are
run. However, the docs didn't clarify that. The previous wording only
mentioned that flag.Parse isn't run before TestMain, which doesn't
necessarily mean that it's run afterwards.
Fixes#38952.
Change-Id: I85f7a9dce637a23c5cb9abc485d47415c1a1ca27
Reviewed-on: https://go-review.googlesource.com/c/go/+/232806
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When we decode into a struct, each input key-value may be decoded into
one of the struct's fields. Particularly, existing data isn't dropped,
so that some sub-fields can be decoded into without zeroing all other
data.
However, decoding into a map behaved in the opposite way. Whenever a
key-value was decoded, it completely replaced the previous map element.
If the map contained any non-zero data in that key, it's dropped.
Instead, try to reuse the existing element value if possible. If the map
element type is a pointer, and the value is non-nil, we can decode
directly into it. If it's not a pointer, make a copy and decode into
that copy, as map element values aren't addressable.
This means we have to parse and convert the map element key before the
value, to be able to obtain the existing element value. This is fine,
though. Moreover, reporting errors on the key before the value follows
the input order more closely.
Finally, add a test to explore the four combinations, involving pointer
and non-pointer, and non-zero and zero values. A table-driven test
wasn't used, as each case required different checks, such as checking
that the non-nil pointer case doesn't end up with a different pointer.
Fixes#31924.
Change-Id: I5ca40c9963a98aaf92f26f0b35843c021028dfca
Reviewed-on: https://go-review.googlesource.com/c/go/+/179337
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The BITCON test, isbitcon, assumes 32-bit constants are expanded
repeatedly, i.e. by copying the low 32 bits to high 32 bits,
instead of zero extending. We already do such expansion in
progedit. In con32class when classifying 32-bit constants, we
should use the expanded constant, instead of zero-extending it.
TODO: we could have better encoding for things like ANDW $-1, Rx.
Fixes#38946.
Change-Id: I37d0c95d744834419db5c897fd1f6c187595c926
Reviewed-on: https://go-review.googlesource.com/c/go/+/232984
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Improve the error user experience when users try to set/refer
to unexported fields and methods of struct literals, by directly saying
"cannot refer to unexported field or method"
Fixes#31053
Change-Id: I6fd3caf64b7ca9f9d8ea60b7756875e340792d59
Reviewed-on: https://go-review.googlesource.com/c/go/+/201657
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The recently added function parseFloatPrefix tested the entire
string for correct placement of separators rather than just the
consumed part. The 4-char fix is in readFloat (atof.go:303).
Added more tests. Also added some white space for nicer
grouping of the test cases.
While at it, removed the need for calling testing.Run.
Fixes#38962.
Change-Id: Ifce84f362bb4ede559103f8d535556d3de9325f1
Reviewed-on: https://go-review.googlesource.com/c/go/+/233017
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Omits printing the file:line:column when trying to
open non-existent files
Given:
go tool compile x.go
* Before:
x.go:0: open x.go: no such file or directory
* After:
open x.go: no such file or directory
Reverts the revert in CL 231043 by only fixing the case
of non-existent errors which is what the original bug
was about. The fix for "permission errors" will come later
on when I have bandwidth to investigate the differences
between running with root and why os.Open works for some
builders and not others.
Fixes#36437
Change-Id: I9c8a0981ad708b504bb43990a4105b42266fa41f
Reviewed-on: https://go-review.googlesource.com/c/go/+/230941
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fix TestFreeBSDNumCPU on newer versions of FreeBSD which have multi line
output from cpuset e.g.
cpuset -g -p 4141
pid 4141 mask: 0, 1, 2, 3, 4, 5, 6, 7, 8
pid 4141 domain policy: first-touch mask: 0, 1
The test now uses just the first line of output.
Fixes#38937Fixes#25924
Change-Id: If082ee6b82120ebde4dc437e58343b3dad69c65f
Reviewed-on: https://go-review.googlesource.com/c/go/+/232801
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The added comment contains some context. The original optimization
assumed that each call to unquoteBytes (or unquote) followed its
corresponding call to rescanLiteral. Otherwise, unquoting a literal
might use d.safeUnquote from another re-scanned literal.
Unfortunately, this assumption is wrong. When decoding {"foo": "bar"}
into a map[T]string where T implements TextUnmarshaler, the sequence of
calls would be as follows:
1) rescanLiteral "foo"
2) unquoteBytes "foo"
3) rescanLiteral "bar"
4) unquoteBytes "foo" (for UnmarshalText)
5) unquoteBytes "bar"
Note that the call to UnmarshalText happens in literalStore, which
repeats the work to unquote the input string literal. But, since that
happens after we've re-scanned "bar", we're using the wrong safeUnquote
field value.
In the added test case, the second string had a non-zero number of safe
bytes, and the first string had none since it was all non-ASCII. Thus,
"safely" unquoting a number of the first string's bytes could cut a rune
in half, and thus mangle the runes.
A rather simple fix, without a full revert, is to only allow one use of
safeUnquote per call to unquoteBytes. Each call to rescanLiteral when
we have a string is soon followed by a call to unquoteBytes, so it's no
longer possible for us to use the wrong index.
Also add a test case from #38126, which is the same underlying bug, but
affecting the ",string" option.
Before the fix, the test would fail, just like in the original two issues:
--- FAIL: TestUnmarshalRescanLiteralMangledUnquote (0.00s)
decode_test.go:2443: Key "开源" does not exist in map: map[开���:12345开源]
decode_test.go:2458: Unmarshal unexpected error: json: invalid use of ,string struct tag, trying to unmarshal "\"aaa\tbbb\"" into string
Fixes#38105.
For #38126.
Change-Id: I761e54924e9a971a4f9eaa70bbf72014bb1476e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/226218
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
This change uses the new offAddr type in more parts of the runtime where
we've been implicitly switching from the default address space to a
contiguous view. The purpose of offAddr is to represent addresses in the
contiguous view of the address space, and to make direct computations
between real addresses and offset addresses impossible. This change thus
improves readability in the runtime.
Updates #35788.
Change-Id: I4e1c5fed3ed68aa12f49a42b82eb3f46aba82fc1
Reviewed-on: https://go-review.googlesource.com/c/go/+/230718
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Currently addrRange and addrRanges operate on real addresses. That is,
the addresses they manipulate don't include arenaBaseOffset. When added
to an address, arenaBaseOffset makes the address space appear contiguous
on platforms where the address space is segmented. While this is
generally OK because even those platforms which have a segmented address
space usually don't give addresses in a different segment, today it
causes a mismatch between the scavenger and the rest of the page
allocator. The scavenger scavenges from the highest addresses first, but
only via real address, whereas the page allocator allocates memory in
offset address order.
So this change makes addrRange and addrRanges, i.e. what the scavenger
operates on, use offset addresses. However, lots of the page allocator
relies on an addrRange containing real addresses.
To make this transition less error-prone, this change introduces a new
type, offAddr, whose purpose is to make offset addresses a distinct
type, so any attempt to trivially mix real and offset addresses will
trigger a compilation error.
This change doesn't attempt to use offAddr in all of the runtime; a
follow-up change will look for and catch remaining uses of an offset
address which doesn't use the type.
Updates #35788.
Change-Id: I991d891ac8ace8339ca180daafdf6b261a4d43d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/230717
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Currently the scavenger will reset to the top of the heap every GC. This
means if it scavenges a bunch of memory which doesn't get used again,
it's going to keep re-scanning that memory on subsequent cycles. This
problem is especially bad when it comes to heap spikes: suppose an
application's heap spikes to 2x its steady-state size. The scavenger
will run over the top half of that heap even if the heap shrinks, for
the rest of the application's lifetime.
To fix this, we maintain two numbers: a "free" high watermark, which
represents the highest address freed to the page allocator in that
cycle, and a "scavenged" low watermark, which represents how low of an
address the scavenger got to when scavenging. If the "free" watermark
exceeds the "scavenged" watermark, then we pick the "free" watermark as
the new "top of the heap" for the scavenger when starting the next
scavenger cycle. Otherwise, we have the scavenger pick up where it left
off.
With this mechanism, we only ever re-scan scavenged memory if a random
page gets freed very high up in the heap address space while most of the
action is happening in the lower parts. This case should be exceedingly
unlikely because the page reclaimer walks over the heap from low address
to high addresses, and we use a first-fit address-ordered allocation
policy.
Updates #35788.
Change-Id: Id335603b526ce3a0eb79ef286d1a4e876abc9cab
Reviewed-on: https://go-review.googlesource.com/c/go/+/218997
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
This change removes the concept of s.scavAddr in favor of explicitly
reserving and unreserving address ranges. s.scavAddr has several
problems with raciness that can cause the scavenger to miss updates, or
move it back unnecessarily, forcing future scavenge calls to iterate
over searched address space unnecessarily.
This change achieves this by replacing scavAddr with a second addrRanges
which is cloned from s.inUse at the end of each sweep phase. Ranges from
this second addrRanges are then reserved by scavengers (with the
reservation size proportional to the heap size) who are then able to
safely iterate over those ranges without worry of another scavenger
coming in.
Fixes#35788.
Change-Id: Ief01ae170384174875118742f6c26b2a41cbb66d
Reviewed-on: https://go-review.googlesource.com/c/go/+/208378
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Austin Clements <austin@google.com>
golang.org/cl/193604 fixed one bug when one encodes a string with the
",string" option: if SetEscapeHTML(false) is used, we should not be
using HTML escaping for the inner string encoding. The CL correctly
fixed that.
The CL also tried to speed up this edge case. By avoiding an entire new
call to Marshal, the new Issue34127 benchmark reduced its time/op by
45%, and lowered the allocs/op from 3 to 2.
However, that last optimization wasn't correct:
Since Go 1.2 every string can be marshaled to JSON without error
even if it contains invalid UTF-8 byte sequences. Therefore
there is no need to use Marshal again for the only reason of
enclosing the string in double quotes.
JSON string encoding isn't just about adding quotes and taking care of
invalid UTF-8. We also need to escape some characters, like tabs and
newlines.
The new code failed to do that. The bug resulted in the added test case
failing to roundtrip properly; before our fix here, we'd see an error:
invalid use of ,string struct tag, trying to unmarshal "\"\b\f\n\r\t\"\\\"" into string
If you pay close attention, you'll notice that the special characters
like tab and newline are only encoded once, not twice. When decoding
with the ",string" option, the outer string decode works, but the inner
string decode fails, as we are now decoding a JSON string with unescaped
special characters.
The fix we apply here isn't to go back to Marshal, as that would
re-introduce the bug with SetEscapeHTML(false). Instead, we can use a
new encode state from the pool - it results in minimal performance
impact, and even reduces allocs/op further. The performance impact seems
fair, given that we need to check the entire string for characters that
need to be escaped.
name old time/op new time/op delta
Issue34127-8 89.7ns ± 2% 100.8ns ± 1% +12.27% (p=0.000 n=8+8)
name old alloc/op new alloc/op delta
Issue34127-8 40.0B ± 0% 32.0B ± 0% -20.00% (p=0.000 n=8+8)
name old allocs/op new allocs/op delta
Issue34127-8 2.00 ± 0% 1.00 ± 0% -50.00% (p=0.000 n=8+8)
Instead of adding another standalone test, we convert an existing
"string tag" test to be table-based, and add another test case there.
One test case from the original CL also had to be amended, due to the
same problem - when escaping '<' due to SetEscapeHTML(true), we need to
end up with double escaping, since we're using ",string".
Fixes#38173.
Change-Id: I2b0df9e4f1d3452fff74fe910e189c930dde4b5b
Reviewed-on: https://go-review.googlesource.com/c/go/+/226498
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Since the ConnectionState will now be available during
verification, some code was moved around in order to
initialize and make available as much of the fields on
Conn as possible before the ConnectionState is verified.
Fixes#36736
Change-Id: I0e3efa97565ead7de5c48bb8a87e3ea54fbde140
Reviewed-on: https://go-review.googlesource.com/c/go/+/229122
Run-TryBot: Katie Hockman <katie@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Automatically rotate session ticket keys for servers
that don't already have sessionTicketKeys and that
haven't called SetSessionTicketKeys.
Now, session ticket keys will be rotated every 24 hours
with a lifetime of 7 days. This adds a small performance
cost to existing clients that don't provide a session
ticket encrypted with a fresh enough session ticket key,
which would require a full handshake.
Updates #25256
Change-Id: I15b46af7a82aab9a108bceb706bbf66243a1510f
Reviewed-on: https://go-review.googlesource.com/c/go/+/230679
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Per X690 Section 11.6 sort the order of SET of components when generating
DER. This CL makes no changes to Unmarshal, meaning unordered components
will still be accepted, and won't be re-ordered during parsing.
In order to sort the components a new encoder, setEncoder, which is similar
to multiEncoder is added. The functional difference is that setEncoder
encodes each component to a [][]byte, sorts the slice using a sort.Sort
interface, and then writes it out to the destination slice. The ordering
matches the output of OpenSSL.
Fixes#24254
Change-Id: Iff4560f0b8c2dce5aae616ba30226f39c10b972e
GitHub-Last-Rev: e52fc43658
GitHub-Pull-Request: golang/go#38228
Reviewed-on: https://go-review.googlesource.com/c/go/+/226984
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Colons are port separators, so it's risky to allow them in hostnames.
Per the CL 231377 rule, if we at least consider them invalid we will not
apply wildcard processing to them, making behavior a little more
predictable.
We were considering hostnames with colons valid (against spec) because
that meant we'd not ignore them in Common Name. (There was at least
one deployment that was putting colons in Common Name and expecting it
to verify.)
Now that Common Name is ignored by default, those clients will break
again, so it's a good time to drop the exception. Hopefully they moved
to SANs, where invalid hostnames are checked 1:1 (ignoring wildcards)
but still work. (If they didn't, this change means they can't use
GODEBUG=x509ignoreCN=0 to opt back in, but again you don't get to use a
legacy deprecated field AND invalid hostnames.)
Updates #24151
Change-Id: Id44b4fecb2d620480acdfc65fea1473f7abbca7f
Reviewed-on: https://go-review.googlesource.com/c/go/+/231381
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
Trailing dots are not allowed in certificate fields like CN and SANs
(while they are allowed and ignored as inputs to verification APIs).
Move to considering names with trailing dots in certificates as invalid
hostnames.
Following the rule of CL 231378, these invalid names lose wildcard
processing, but can still match if there is a 1:1 match, trailing dot
included, with the VerifyHostname input.
They also become ignored Common Name values regardless of the
GODEBUG=x509ignoreCN=X value, because we have to ignore invalid
hostnames in Common Name for #24151. The error message automatically
accounts for this, and doesn't suggest the environment variable. You
don't get to use a legacy deprecated field AND invalid hostnames.
(While at it, also consider wildcards in VerifyHostname inputs as
invalid hostnames, not that it should change any observed behavior.)
Change-Id: Iecdee8927df50c1d9daf904776b051de9f5e76ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/231380
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
Common Name has been deprecated for 20 years, and has horrible
interactions with Name Constraints. The browsers managed to drop it last
year, let's try flicking the switch to disabled by default.
Return helpful errors for things that would get unbroken by flipping the
switch back with the environment variable.
Had to refresh a test certificate that was too old to have SANs.
Updates #24151
Change-Id: I2ab78577fd936ba67969d3417284dbe46e4ae02f
Reviewed-on: https://go-review.googlesource.com/c/go/+/231379
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
When the input or SAN dNSNames are not valid hostnames, the specs don't
define what should happen, because this should ideally never happen, so
everything we do is undefined behavior. Browsers get to just return an
error, because browsers can assume that the resolving layer is DNS. We
can't, names can be resolved by anything implementing a Dial function,
and the crypto/x509 APIs can also be used directly without actual
networks in sight.
Trying to process invalid hostnames leads to issues like #27591 where
wildcards glob stuff they aren't expected to, because wildcards are only
defined on hostnames.
Try to rationalize the behavior like this: if both the VerifyHostname
input and the SAN dNSNames are a valid hostname, follow the specs;
otherwise, only accept perfect 1:1 case-insensitive matches (without
wildcards or trailing dot processing).
This should allow us to keep supporting weird names, with less
unexpected side-effects from undefined behavior. Also, it's a rule, even
if completely made up, so something we can reason about and code against.
The commonName field does allow any string, but no specs define how to
process it. Processing it differently from dNSNames would be confusing,
and allowing it to match invalid hostnames is incompatible with Name
Constraint processing (#24151).
This does encourage invalid dNSNames, regrettably, but we need some way
for the standard API to match weird names, and the alternative of
keeping CN alive sounds less appealing.
Fixes#27591
Change-Id: Id2d515f068a17ff796a32b30733abe44ad4f0339
Reviewed-on: https://go-review.googlesource.com/c/go/+/231378
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
If dst slice length is zero in makeslicecopy then the called mallocgc is
using a fast path to only return a pointer to runtime.zerobase.
There may be no heapBits for that address readable by
bulkBarrierPreWriteSrcOnly which will cause a panic.
Protect against this by not calling bulkBarrierPreWriteSrcOnly if
there is nothing to copy. This is the case for all cases where the
length of the destination slice is zero.
runtime.growslice and runtime.typedslicecopy have fast paths that
do not call bulkBarrierPreWrite for zero copy lengths either.
Fixes#38929
Change-Id: I78ece600203a0a8d24de5b6c9eef56f605d44e99
Reviewed-on: https://go-review.googlesource.com/c/go/+/232800
Reviewed-by: Keith Randall <khr@golang.org>
Currently linearAlloc manages an exclusive "end" address for the top of
its reserved space. While unlikely for a linearAlloc to be allocated
with an "end" address hitting the top of the address space, it is
possible and could lead to overflow.
Avoid overflow by chopping off the last byte from the linearAlloc if
it's bumping up against the top of the address space defensively. In
practice, this means that if 32-bit platforms map the top of the address
space and use the linearAlloc to acquire arenas, the top arena will not
be usable.
Fixes#35954.
Change-Id: I512cddcd34fd1ab15cb6ca92bbf899fc1ef22ff6
Reviewed-on: https://go-review.googlesource.com/c/go/+/231338
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Currently when checking if we can grow the heap into the current arena,
we do an addition which may overflow. This is particularly likely on
32-bit systems.
Avoid this situation by explicitly checking for overflow, and adding in
some comments about when overflow is possible, when it isn't, and why.
For #35954.
Change-Id: I2d4ecbb1ccbd43da55979cc721f0cd8d1757add2
Reviewed-on: https://go-review.googlesource.com/c/go/+/231337
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I added routines that can acquire/release a particular rank without
acquiring/releasing an associated lock. I added lockRankGscan as a rank
for acquiring/releasing the Gscan bit.
castogscanstatus() and casGtoPreemptScan() are acquires of the Gscan
bit. casfrom_Gscanstatus() is a release of the Gscan bit. casgstatus()
is like an acquire and release of the Gscan bit, since it will wait if
Gscan bit is currently set.
We have a cycle between hchan and Gscan. The acquisition of Gscan and
then hchan only happens in syncadjustsudogs() when the G is suspended,
so the main normal ordering (get hchan, then get Gscan) can't be
happening. So, I added a new rank lockRankHchanLeaf that is used when
acquiring hchan locks in syncadjustsudogs. This ranking is set so no
other locks can be acquired except other hchan locks.
Fixes#38922
Change-Id: I58ce526a74ba856cb42078f7b9901f2832e1d45c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228417
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
+----------------------------------------------------------------------+
| Hello, if you are reading this and run macOS, please test this code: |
| |
| $ GO111MODULE=on go get golang.org/dl/gotip@latest |
| $ gotip download |
| $ GODEBUG=x509roots=1 gotip test crypto/x509 -v -run TestSystemRoots |
+----------------------------------------------------------------------+
We currently have two code paths to extract system roots on macOS: one
uses cgo to invoke a maze of Security.framework APIs; the other is a
horrible fallback that runs "/usr/bin/security verify-cert" on every
root that has custom policies to check if it's trusted for SSL.
The fallback is not only terrifying because it shells out to a binary,
but also because it lets in certificates that are not trusted roots but
are signed by trusted roots, and because it applies some filters (EKUs
and expiration) only to roots with custom policies, as the others are
not passed to verify-cert. The other code path, of course, requires cgo,
so can't be used when cross-compiling and involves a large ball of C.
It's all a mess, and it broke oh-so-many times (#14514, #16532, #19436,
#20990, #21416, #24437, #24652, #25649, #26073, #27958, #28025, #28092,
#29497, #30471, #30672, #30763, #30889, #32891, #38215, #38365, ...).
Since macOS does not have a stable syscall ABI, we already dynamically
link and invoke libSystem.dylib regardless of cgo availability (#17490).
How that works is that functions in package syscall (like syscall.Open)
take the address of assembly trampolines (like libc_open_trampoline)
that jump to symbols imported with cgo_import_dynamic (like libc_open),
and pass them along with arguments to syscall.syscall (which is
implemented as runtime.syscall_syscall). syscall_syscall informs the
scheduler and profiler, and then uses asmcgocall to switch to a system
stack and invoke runtime.syscall. The latter is an assembly trampoline
that unpacks the Go ABI arguments passed to syscall.syscall, finally
calls the remote function, and puts the return value on the Go stack.
(This last bit is the part that cgo compiles from a C wrapper.)
We can do something similar to link and invoke Security.framework!
The one difference is that runtime.syscall and friends check errors
based on the errno convention, which Security doesn't follow, so I added
runtime.syscallNoErr which just skips interpreting the return value.
We only need a variant with six arguments because the calling convention
is register-based, and extra arguments simply zero out some registers.
That's plumbed through as crypto/x509/internal/macOS.syscall. The rest
of that package is a set of wrappers for Security.framework and Core
Foundation functions, like syscall is for libSystem. In theory, as long
as macOS respects ABI backwards compatibility (a.k.a. as long as
binaries built for a previous OS version keep running) this should be
stable, as the final result is not different from what a C compiler
would make. (One exception might be dictionary key strings, which we
make our own copy of instead of using the dynamic symbol. If they change
the value of those strings things might break. But why would they.)
Finally, I rewrote the crypto/x509 cgo logic in Go using those wrappers.
It works! I tried to make it match 1:1 the old logic, so that
root_darwin_amd64.go can be reviewed by comparing it to
root_cgo_darwin_amd64.go. The only difference is that we do proper error
handling now, and assume that if there is no error the return values are
there, while before we'd just check for nil pointers and move on.
I kept the cgo logic to help with review and testing, but we should
delete it once we are confident the new code works.
The nocgo logic is gone and we shall never speak of it again.
Fixes#32604Fixes#19561Fixes#38365
Awakens Cthulhu
Change-Id: Id850962bad667f71e3af594bdfebbbb1edfbcbb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/227037
Reviewed-by: Katie Hockman <katie@golang.org>
Also encode the certificates in a way that's more
consistent with TLS 1.3 (with a 24 byte length prefix).
Note that this will have an additional performance cost
requiring clients to do a full handshake every 7 days
where previously they were able to use the same ticket
indefinitely.
Updates #25256
Change-Id: Ic4d1ba0d92773c490b33b5f6c1320d557cc7347d
Reviewed-on: https://go-review.googlesource.com/c/go/+/231317
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
We might as well grow the stack at least as large as we'll need for
the frame that is calling morestack. It doesn't help with the
lots-of-small-frames case, but it may help a bit with the
few-big-frames case.
Update #18138
Change-Id: I1f49c97706a70e20b30433cbec99a7901528ea52
Reviewed-on: https://go-review.googlesource.com/c/go/+/225800
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
match:
m = make([]T, x); copy(m, s)
for pointer free T and x==len(s) rewrite to:
m = mallocgc(x*elemsize(T), nil, false); memmove(&m, &s, x*elemsize(T))
otherwise rewrite to:
m = makeslicecopy([]T, x, s)
This avoids memclear and shading of pointers in the newly created slice
before the copy.
With this CL "s" is only be allowed to bev a variable and not a more
complex expression. This restriction could be lifted in future versions
of this optimization when it can be proven that "s" is not referencing "m".
Triggers 450 times during make.bash..
Reduces go binary size by ~8 kbyte.
name old time/op new time/op delta
MakeSliceCopy/mallocmove/Byte 71.1ns ± 1% 65.8ns ± 0% -7.49% (p=0.000 n=10+9)
MakeSliceCopy/mallocmove/Int 71.2ns ± 1% 66.0ns ± 0% -7.27% (p=0.000 n=10+8)
MakeSliceCopy/mallocmove/Ptr 104ns ± 4% 99ns ± 1% -5.13% (p=0.000 n=10+10)
MakeSliceCopy/makecopy/Byte 70.3ns ± 0% 68.0ns ± 0% -3.22% (p=0.000 n=10+9)
MakeSliceCopy/makecopy/Int 70.3ns ± 0% 68.5ns ± 1% -2.59% (p=0.000 n=9+10)
MakeSliceCopy/makecopy/Ptr 102ns ± 0% 99ns ± 1% -2.97% (p=0.000 n=9+9)
MakeSliceCopy/nilappend/Byte 75.4ns ± 0% 74.9ns ± 2% -0.63% (p=0.015 n=9+9)
MakeSliceCopy/nilappend/Int 75.6ns ± 0% 76.4ns ± 3% ~ (p=0.245 n=9+10)
MakeSliceCopy/nilappend/Ptr 107ns ± 0% 108ns ± 1% +0.93% (p=0.005 n=9+10)
Fixes#26252
Change-Id: Iec553dd1fef6ded16197216a472351c8799a8e71
Reviewed-on: https://go-review.googlesource.com/c/go/+/146719
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Speed up repeated HMAC operations with the same key by not recomputing
the first block of the inner and outer hashes in Reset and Sum, saving
two block computations each time.
This is a significant win for applications which hash many small
messages with the same key. In x/crypto/pbkdf2 for example, this
optimization cuts the number of block computations in half, speeding it
up by 25%-40% depending on the hash function.
The hash function needs to implement binary.Marshaler and
binary.Unmarshaler for this optimization to work, so that we can save
and restore its internal state. All hash functions in the standard
library are marshalable (CL 66710) but if the hash isn't marshalable, we
fall back on the old behaviour.
Marshaling the hashes does add a couple unavoidable new allocations, but
this only has to be done once, so the cost is amortized over repeated
uses. To minimize impact to applications which don't (or can't) reuse
hmac objects, marshaling is performed in Reset (rather than in New),
since calling Reset seems like a good indication that the caller intends
to reuse the hmac object later.
I had to add a boolean field to the hmac state to remember if we've
marshaled the hashes or not. This is paid for by removing the size and
blocksize fields, which were basically unused except for some
initialization work in New, and to fulfill the Size and Blocksize
methods. Size and Blocksize can just be forwarded to the underlying
hash, so there doesn't really seem to be any reason to waste space
caching their values.
crypto/hmac benchmarks:
name old time/op new time/op delta
HMAC_Reset/SHA1/1K-2 4.06µs ± 0% 3.77µs ± 0% -7.29% (p=0.000 n=8+10)
HMAC_Reset/SHA1/32-2 1.08µs ± 0% 0.78µs ± 1% -27.67% (p=0.000 n=10+10)
HMAC_Reset/SHA256/1K-2 10.3µs ± 0% 9.4µs ± 0% -9.03% (p=0.000 n=10+10)
HMAC_Reset/SHA256/32-2 2.32µs ± 0% 1.42µs ± 0% -38.87% (p=0.000 n=10+10)
HMAC_Reset/SHA512/1K-2 8.22µs ± 0% 7.04µs ± 0% -14.32% (p=0.000 n=9+9)
HMAC_Reset/SHA512/32-2 3.08µs ± 0% 1.89µs ± 0% -38.54% (p=0.000 n=10+9)
HMAC_New/SHA1/1K-2 4.86µs ± 1% 4.93µs ± 1% +1.30% (p=0.000 n=10+9)
HMAC_New/SHA1/32-2 1.91µs ± 1% 1.95µs ± 1% +1.84% (p=0.000 n=10+9)
HMAC_New/SHA256/1K-2 11.2µs ± 1% 11.2µs ± 0% ~ (p=1.000 n=9+10)
HMAC_New/SHA256/32-2 3.22µs ± 2% 3.19µs ± 2% -1.07% (p=0.018 n=9+10)
HMAC_New/SHA512/1K-2 9.54µs ± 0% 9.66µs ± 1% +1.31% (p=0.000 n=9+10)
HMAC_New/SHA512/32-2 4.37µs ± 1% 4.46µs ± 1% +1.97% (p=0.000 n=10+9)
name old speed new speed delta
HMAC_Reset/SHA1/1K-2 252MB/s ± 0% 272MB/s ± 0% +7.86% (p=0.000 n=8+10)
HMAC_Reset/SHA1/32-2 29.7MB/s ± 0% 41.1MB/s ± 1% +38.26% (p=0.000 n=10+10)
HMAC_Reset/SHA256/1K-2 99.1MB/s ± 0% 108.9MB/s ± 0% +9.93% (p=0.000 n=10+10)
HMAC_Reset/SHA256/32-2 13.8MB/s ± 0% 22.6MB/s ± 0% +63.57% (p=0.000 n=10+10)
HMAC_Reset/SHA512/1K-2 125MB/s ± 0% 145MB/s ± 0% +16.71% (p=0.000 n=9+9)
HMAC_Reset/SHA512/32-2 10.4MB/s ± 0% 16.9MB/s ± 0% +62.69% (p=0.000 n=10+9)
HMAC_New/SHA1/1K-2 211MB/s ± 1% 208MB/s ± 1% -1.29% (p=0.000 n=10+9)
HMAC_New/SHA1/32-2 16.7MB/s ± 1% 16.4MB/s ± 1% -1.81% (p=0.000 n=10+9)
HMAC_New/SHA256/1K-2 91.3MB/s ± 1% 91.5MB/s ± 0% ~ (p=0.950 n=9+10)
HMAC_New/SHA256/32-2 9.94MB/s ± 2% 10.04MB/s ± 2% +1.09% (p=0.021 n=9+10)
HMAC_New/SHA512/1K-2 107MB/s ± 0% 106MB/s ± 1% -1.29% (p=0.000 n=9+10)
HMAC_New/SHA512/32-2 7.32MB/s ± 1% 7.18MB/s ± 1% -1.89% (p=0.000 n=10+9)
name old alloc/op new alloc/op delta
HMAC_Reset/SHA1/1K-2 0.00B ±NaN% 0.00B ±NaN% ~ (all samples are equal)
HMAC_Reset/SHA1/32-2 0.00B ±NaN% 0.00B ±NaN% ~ (all samples are equal)
HMAC_Reset/SHA256/1K-2 0.00B ±NaN% 0.00B ±NaN% ~ (all samples are equal)
HMAC_Reset/SHA256/32-2 0.00B ±NaN% 0.00B ±NaN% ~ (all samples are equal)
HMAC_Reset/SHA512/1K-2 0.00B ±NaN% 0.00B ±NaN% ~ (all samples are equal)
HMAC_Reset/SHA512/32-2 0.00B ±NaN% 0.00B ±NaN% ~ (all samples are equal)
HMAC_New/SHA1/1K-2 448B ± 0% 448B ± 0% ~ (all samples are equal)
HMAC_New/SHA1/32-2 448B ± 0% 448B ± 0% ~ (all samples are equal)
HMAC_New/SHA256/1K-2 480B ± 0% 480B ± 0% ~ (all samples are equal)
HMAC_New/SHA256/32-2 480B ± 0% 480B ± 0% ~ (all samples are equal)
HMAC_New/SHA512/1K-2 800B ± 0% 800B ± 0% ~ (all samples are equal)
HMAC_New/SHA512/32-2 800B ± 0% 800B ± 0% ~ (all samples are equal)
name old allocs/op new allocs/op delta
HMAC_Reset/SHA1/1K-2 0.00 ±NaN% 0.00 ±NaN% ~ (all samples are equal)
HMAC_Reset/SHA1/32-2 0.00 ±NaN% 0.00 ±NaN% ~ (all samples are equal)
HMAC_Reset/SHA256/1K-2 0.00 ±NaN% 0.00 ±NaN% ~ (all samples are equal)
HMAC_Reset/SHA256/32-2 0.00 ±NaN% 0.00 ±NaN% ~ (all samples are equal)
HMAC_Reset/SHA512/1K-2 0.00 ±NaN% 0.00 ±NaN% ~ (all samples are equal)
HMAC_Reset/SHA512/32-2 0.00 ±NaN% 0.00 ±NaN% ~ (all samples are equal)
HMAC_New/SHA1/1K-2 5.00 ± 0% 5.00 ± 0% ~ (all samples are equal)
HMAC_New/SHA1/32-2 5.00 ± 0% 5.00 ± 0% ~ (all samples are equal)
HMAC_New/SHA256/1K-2 5.00 ± 0% 5.00 ± 0% ~ (all samples are equal)
HMAC_New/SHA256/32-2 5.00 ± 0% 5.00 ± 0% ~ (all samples are equal)
HMAC_New/SHA512/1K-2 5.00 ± 0% 5.00 ± 0% ~ (all samples are equal)
HMAC_New/SHA512/32-2 5.00 ± 0% 5.00 ± 0% ~ (all samples are equal)
x/crypto/pbkdf2 benchmarks:
name old time/op new time/op delta
HMACSHA1-2 4.63ms ± 0% 3.40ms ± 0% -26.58% (p=0.000 n=10+9)
HMACSHA256-2 9.75ms ± 0% 5.98ms ± 0% -38.62% (p=0.000 n=9+10)
name old alloc/op new alloc/op delta
HMACSHA1-2 516B ± 0% 708B ± 0% +37.21% (p=0.000 n=10+10)
HMACSHA256-2 549B ± 0% 772B ± 0% +40.62% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
HMACSHA1-2 8.00 ± 0% 10.00 ± 0% +25.00% (p=0.000 n=10+10)
HMACSHA256-2 8.00 ± 0% 10.00 ± 0% +25.00% (p=0.000 n=10+10)
Fixes#19941
Change-Id: I7077a6f875be68d3da05f7b3664e18514861886f
Reviewed-on: https://go-review.googlesource.com/c/go/+/27458
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Reject base 128 encoded integers that aren't using minimal encoding,
specifically if the leading octet of an encoded integer is 0x80. This
only affects parsing of tags and OIDs, both of which expect this
encoding (see X.690 8.1.2.4.2 and 8.19.2).
Fixes#36881
Change-Id: I969cf48ac1fba7e56bac334672806a0784d3e123
GitHub-Last-Rev: fefc03d202
GitHub-Pull-Request: golang/go#38281
Reviewed-on: https://go-review.googlesource.com/c/go/+/227320
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The previous behavior directly contradicted the docs that have been in
place for years:
To unmarshal a JSON array into a slice, Unmarshal resets the
slice length to zero and then appends each element to the slice.
We could use reflect.New to create a new element and reflect.Append to
then append it to the destination slice, but benchmarks have shown that
reflect.Append is very slow compared to the code that manually grows a
slice in this file.
Instead, if we're decoding into an element that came from the original
backing array, zero it before decoding into it. We're going to be using
the CodeDecoder benchmark, as it has a slice of struct pointers that's
decoded very often.
Note that we still reuse existing values from arrays being decoded into,
as the documentation agrees with the existing implementation in that
case:
To unmarshal a JSON array into a Go array, Unmarshal decodes
JSON array elements into corresponding Go array elements.
The numbers with the benchmark as-is might seem catastrophic, but that's
only because the benchmark is decoding into the same variable over and
over again. Since the old decoder was happy to reuse slice elements, it
would save a lot of allocations by not having to zero and re-allocate
said elements:
name old time/op new time/op delta
CodeDecoder-8 10.4ms ± 1% 10.9ms ± 1% +4.41% (p=0.000 n=10+10)
name old speed new speed delta
CodeDecoder-8 186MB/s ± 1% 178MB/s ± 1% -4.23% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
CodeDecoder-8 2.19MB ± 0% 3.59MB ± 0% +64.09% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
CodeDecoder-8 76.8k ± 0% 92.7k ± 0% +20.71% (p=0.000 n=10+10)
We can prove this by moving 'var r codeResponse' into the loop, so that
the benchmark no longer reuses the destination pointer. And sure enough,
we no longer see the slow-down caused by the extra allocations:
name old time/op new time/op delta
CodeDecoder-8 10.9ms ± 0% 10.9ms ± 1% -0.37% (p=0.043 n=10+10)
name old speed new speed delta
CodeDecoder-8 177MB/s ± 0% 178MB/s ± 1% +0.37% (p=0.041 n=10+10)
name old alloc/op new alloc/op delta
CodeDecoder-8 3.59MB ± 0% 3.59MB ± 0% ~ (p=0.780 n=10+10)
name old allocs/op new allocs/op delta
CodeDecoder-8 92.7k ± 0% 92.7k ± 0% ~ (all equal)
I believe that it's useful to leave the benchmarks as they are now,
because the decoder does reuse memory in some cases. For example,
existing map elements are reused. However, subtle changes like this one
need to be benchmarked carefully.
Finally, add a couple of tests involving both a slice and an array of
structs.
Fixes#21092.
Change-Id: I8b1194f25e723a31abd146fbfe9428ac10c1389d
Reviewed-on: https://go-review.googlesource.com/c/go/+/191783
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This commit moves the isSelect bool below the ticket uint32. The
boolean was consuming 8 bytes of the struct. The uint32 was also
consuming 8 bytes, so we can pack isSelect below the uint32 and save 8
bytes. This reduces the sudog struct from 96 bytes to 88 bytes.
Change-Id: If555cdaf2f5eaa125e2590fc4d113dbc99750738
GitHub-Last-Rev: d63b4e086b
GitHub-Pull-Request: golang/go#36552
Reviewed-on: https://go-review.googlesource.com/c/go/+/214677
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The undef pass basically double-checks the relocation targets are
defined. We already do that in the reloc pass, and for external
relocations we check that when we emit relocations. The undef pass
doesn't seem necessary.
Change-Id: Iecfa654dc014fdc6e59c624cbf5948ad65fd367a
Reviewed-on: https://go-review.googlesource.com/c/go/+/232577
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This CL sets positions for errors from cals to load within the load
call itself, similar to how the rest of the code in pkg.go sets
positions right after the error is set on the package.
This allows the code to ensure that we only add positions either for
ImportPathErrors, or if an error was passed into load, and was set
using setLoadPackageDataError. (Though I'm wondering if the call
to setLoadPackageDataError should be done before the call to load).
Fixes#38034
Change-Id: I0748866933b4c1a329954b4b96640bef702a4644
Reviewed-on: https://go-review.googlesource.com/c/go/+/228784
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
This is a security hardening measure against HTTP request smuggling.
Thank you to ZeddYu for reporting this issue.
We weren't parsing things correctly anyway, allowing "identity" to be
combined with "chunked", and ignoring any Transfer-Encoding header past
the first. This is a delicate security surface that already broke
before, just be strict and don't add complexity to support cases not
observed in the wild (nginx removed "identity" support [1] and multiple
TE header support [2]) and removed by RFC 7230 (see page 81).
It'd probably be good to also drop support for anything other than
"chunked" in outbound TE headers, as "identity" is not a thing anymore,
and we are probably off-spec for anything other than "chunked", but it
should not be a security concern, so leaving it for now. See #38867.
[1]: https://hg.nginx.org/nginx/rev/fe5976aae0e3
[2]: https://hg.nginx.org/nginx/rev/aca005d232ff
Change-Id: If17d0827f9c6167a0b19a158e2bc5844ec803288
Reviewed-on: https://go-review.googlesource.com/c/go/+/231418
Reviewed-by: Katie Hockman <katie@golang.org>
Clients have to reject any HelloRetryRequest message that doesn't lead
to a change in the ClientHello. Instead, we were rejecting any HRR that
didn't select an alternative group, even if it sent a cookie, which
would change the CH.
The good news is that I know of no TLS servers that use or need HRRs
exclusively for cookies (which are mostly useful in DTLS as a way to
verify the source address). The bad news is that we poisoned the
ecosystem as Go 1.12 to 1.14 will reject such HRRs. Oops, hopefully no
one needed this.
No tests because neither Go nor s_server support cookies. This would
presumably get covered once we integrate BoGo.
Fixes#30149
Change-Id: I760fb1ded81148ac3096cf201cbc1e941374b83d
Reviewed-on: https://go-review.googlesource.com/c/go/+/231039
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
On some architectures, for async preemption the injected call
needs to clobber a register (usually REGTMP) in order to return
to the preempted function. As a consequence, the PC ranges where
REGTMP is live are not preemptible.
The uses of REGTMP are usually generated by the assembler, where
it needs to load or materialize a large constant or offset that
doesn't fit into the instruction. In those cases, REGTMP is not
live at the start of the instruction sequence. Instead of giving
up preemption in those cases, we could preempt it and restart the
sequence when resuming the execution. Basically, this is like
reissuing an interrupted instruction, except that here the
"instruction" is a Prog that consists of multiple machine
instructions. For this to work, we need to generate PC data to
mark the start of the Prog.
Currently this is only done for ARM64.
TODO: the split-stack function prologue is currently not async
preemptible. We could use this mechanism, preempt it and restart
at the function entry.
Change-Id: I37cb282f8e606e7ab6f67b3edfdc6063097b4bd1
Reviewed-on: https://go-review.googlesource.com/c/go/+/208126
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
There is a range of numbers lower than 0x7fff_ffff_ffff_ffff which
cannot be represented by a 64 bit float. We set that to the correct
limit beyond which conversions can happen properly.
It appears that the negative bound check can indeed by correctly handled
by I64TruncF64S. But we use the same limit for consistency.
Fixes#38839
Change-Id: Ib783a22cb331fba7e6955459f41c67f9ceb53461
Reviewed-on: https://go-review.googlesource.com/c/go/+/231837
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The {AND,OR,XOR}const ops can only take an int32 as an argument.
Make sure that when rewriting a BTx op to one of these, the result
has no high-order bits.
Fixes#38746
Change-Id: Ia7c5f76952329f60974bc033c29a5433610f3b28
Reviewed-on: https://go-review.googlesource.com/c/go/+/231977
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Replaced almost every use of Bytes with FillBytes.
Note that the approved proposal was for
func (*Int) FillBytes(buf []byte)
while this implements
func (*Int) FillBytes(buf []byte) []byte
because the latter was far nicer to use in all callsites.
Fixes#35833
Change-Id: Ia912df123e5d79b763845312ea3d9a8051343c0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/230397
Reviewed-by: Robert Griesemer <gri@golang.org>
The Go 1.15 code freeze has just started. This is the time to update
all golang.org/x/... module versions that contribute packages to the
std and cmd modules in the standard library to latest master versions.
Those versions have already gone through code review, and now they
will undergo additional testing during the freeze period.
If there are new issues in these dependencies discovered, we have
the freeze period to deal with that. By the end of the freeze period,
we will have confidence that the Go 1.15 release and the dependency
versions it has selected are robust.
If one of the Go 1.15.x minor releases requires changing code in one of
the vendored packages, we'll be able to do so on top of the versions
that are selected here, and not be forced to use versions that came
from different time periods, or try to jump across multiple untested
versions in a minor release.
The dependency versions that are selected in this commit are:
github.com/google/pprof v0.0.0-20200229191704-1ebb73c60ed3
github.com/ianlancetaylor/demangle v0.0.0-20200414190113-039b1ae3a340
golang.org/x/arch v0.0.0-20200312215426-ff8b605520f4
golang.org/x/crypto v0.0.0-20200429183012-4b2356b1ed79
golang.org/x/mod v0.2.1-0.20200429172858-859b3ef565e2
golang.org/x/net v0.0.0-20200501053045-e0ff5e5a1de5
golang.org/x/sys v0.0.0-20200501145240-bc7a7d42d5c3
golang.org/x/text v0.3.3-0.20200430171850-afb9336c4530
golang.org/x/tools v0.0.0-20200504152539-33427f1b0364
golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543
github.com/ianlancetaylor/demangle is considered in scope and updated.
github.com/google/pprof is out of scope and was not updated.
For #36905.
Change-Id: Icb6996eb0df11f16edd9a42e04434012c0336354
Reviewed-on: https://go-review.googlesource.com/c/go/+/231657
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, Value.Addr collapses flagRO, which is a combination of
flagEmbedRO and flagStickyRO, to flagStickyRO. This causes exported
fields of unexported anonymous field from Value.Addr.Elem read only.
This commit fix this by keeping all bits of flagRO from origin
value in Value.Addr. This should be safe due to following reasons:
* Result of Value.Addr is not CanSet because of it is not CanAddr
but not flagRO.
* Addr.Elem get same flagRO as origin, so it should behave same as
origin in CanSet.
Fixes#32772.
Change-Id: I79e086628c0fb6569a50ce63f3b95916f997eda1
GitHub-Last-Rev: 78e280e6d0
GitHub-Pull-Request: golang/go#32787
Reviewed-on: https://go-review.googlesource.com/c/go/+/183937
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
QueryPattern will now look up the current version of a module (if any)
before invoking queryProxy. This changes the interpretation of some
patterns (like "upgrade") and avoids the need to download earlier
versions for earlier versions when the current version is
+incompatible.
Fixes#37574
Change-Id: I4089d6099236493df13a7f88a252b5e5e556d383
Reviewed-on: https://go-review.googlesource.com/c/go/+/231599
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Introduces a few casts, mostly to fix rules that mix int64 and int32
off1 and off2.
Passes
GOARCH=arm64 gotip build -toolexec 'toolstash -cmp' -a std
Change-Id: I1ec75211f3bb8e521dcc5217cf29ab0655a84d79
Reviewed-on: https://go-review.googlesource.com/c/go/+/230840
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The function Abbrevs() was returning an array of structures by value,
which is not very efficient (this was showing up in a kubernetes
kubelet linker profile). Switch the function to return a slice
instead.
Improves linker DwarfGenerateDebugSyms running time when
linking the compiler in compilebench:
DwarfGenerateDebugSyms 29.2ms ±144% 23.9ms ±125% -17.89% (p=0.000 n=99+99)
Change-Id: I1132816563f208c63eb82a7932d9f2bcb2455324
Reviewed-on: https://go-review.googlesource.com/c/go/+/231558
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
CL 208617 introduced syscall.utf16PtrToString and
internal/syscall/windows.UTF16PtrToString functions.
Original version of CL 208617 did not include syscall.utf16PtrToString
and internal/syscall/windows.UTF16PtrToString max parameter. The
parameter was added by Brad at the request of Ian. Ian said:
"In some cases it seems at least possible that the null terminator is
not present. I think it would be safer if we passed a maximum length
here."
The syscall.utf16PtrToString and
internal/syscall/windows.UTF16PtrToString function are designed to work
with only null terminated strings. So max parameter is superfluous.
This change removes max parameter.
Updates #34972
Change-Id: Ifea65dbd86bca8a08353579c6b9636c6f963d165
Reviewed-on: https://go-review.googlesource.com/c/go/+/228858
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
When forwarding a request, a SingleHostReverseProxy appends the
request's path to the target URL's path. However, if certain path
elements are encoded, (such as %2F for slash in either the request or
target path), simply joining the URL.Path elements is not sufficient,
since the field holds the decoded path.
Since 87a605, the RawPath field was added which holds a decoding
hint for the URL. When joining URL paths, this decoding hint needs
to be taken into consideration.
As an example, if the target URL.Path is /a/b, and URL.RawPath
is /a%2Fb, joining the path with /c should result in /a/b/c
in URL.Path, and /a%2Fb/c in RawPath.
The added joinURLPath function combines the two URL's Paths,
while taking into account escaping, and replaces the previously used
singleJoiningSlash in NewSingleHostReverseProxy.
Fixes#35908
Change-Id: I45886aee548431fe4031883ab1629a41e35f1727
GitHub-Last-Rev: 7be6b8d421
GitHub-Pull-Request: golang/go#36378
Reviewed-on: https://go-review.googlesource.com/c/go/+/213257
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This makes the intent clearer, allows for another ellipsis and will aid
in future rewriting. While here, document boolean loads to explain register
contents.
Change-Id: I933db2813826d88819366191fbbea8fcee5e4dda
Reviewed-on: https://go-review.googlesource.com/c/go/+/230120
Reviewed-by: Keith Randall <khr@golang.org>
Ctty was always handled as a child descriptor, but in some cases
passing a parent descriptor would also work. This depended on
unpredictable details of the implementation. Reject those cases to
avoid confusion.
Also reject setting both Setctty and Foreground, as they use Ctty
in incompatible ways. It's unlikely that any programs set both fields,
as they don't make sense together.
Fixes#29458
Change-Id: Ieba2d625711fd4b82c8e65e1feed02fd1fb25e6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/231638
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Normalization of number prefixes and exponents was added in CL 160184
directly in cmd/gofmt. The same behavior change needs to be applied in
the go/format package. This is done by moving the normalization code
into go/printer, behind a new StdFormat mode, which is then re-used
by both cmd/gofmt and go/format.
Note that formatting of Go source code changes over time, so the exact
byte output produced by go/printer may change between versions of Go
when using StdFormat mode. What is guaranteed is that the new formatting
is equivalent Go code.
Clients looking to format Go code with standard formatting consistent
with cmd/gofmt and go/format would need to start using this flag, but
a better alternative is to use the go/format package instead.
Benchstat numbers on go test go/printer -bench=BenchmarkPrint:
name old time/op new time/op delta
Print-8 4.56ms ± 1% 4.57ms ± 0% ~ (p=0.700 n=3+3)
name old alloc/op new alloc/op delta
Print-8 467kB ± 0% 467kB ± 0% ~ (p=1.000 n=3+3)
name old allocs/op new allocs/op delta
Print-8 17.2k ± 0% 17.2k ± 0% ~ (all equal)
That benchmark data doesn't contain any numbers that need to be
normalized. More work needs to be performed when formatting Go code
with numbers, but it is unavoidable to produce standard formatting.
Fixes#37476.
For #37453.
Change-Id: If50bde4035c3ee6e6ff0ece5691f6d3566ffe8d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/231461
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Adding the usage of PCALIGN directive for arm64, and updating some
details on using some directives defined in the textflag.h file.
Change-Id: I43d363e3337939bab69b856831caf06803a292d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/227801
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This commit adds a new option to the x86 assembler. If the
GOAMD64 environment variable is set to alignedjumps (the
default) and we're doing a 64 bit build, the assembler will
make sure that neither stand alone nor macro-fused jumps will
end on or cross 32 byte boundaries. To achieve this, functions
are aligned on 32 byte boundaries, rather than 16 bytes, and
jump instructions are padded to ensure that they do not
cross or end on 32 byte boundaries. Jumps are padded
by adding a NOP instruction of the appropriate length before
the jump.
The commit is likely to result in larger binary sizes when
GOAMD64=alignedjumps. On the binaries tested so far, an
increase of between 1.4% and 1.5% has been observed.
Updates #35881
Co-authored-by: David Chase <drchase@google.com>
Change-Id: Ief0722300bc3f987098e4fd92b22b14ad6281d91
Reviewed-on: https://go-review.googlesource.com/c/go/+/219357
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A symbol being reachable doesn't imply its type descriptor is
needed. Don't mark it.
If the type is converted to interface somewhere in the program,
there will be an explicit use of the type descriptor, which
will make it marked.
A println("hello") program before and after
-rwxr-xr-x 1 cherryyz primarygroup 1259824 Apr 30 23:00 hello
-rwxr-xr-x 1 cherryyz primarygroup 1169680 Apr 30 23:10 hello
Updates #38782.
Updates #6853.
Change-Id: I88884c126ce75ba073f1ba059c4b892c87d2ac96
Reviewed-on: https://go-review.googlesource.com/c/go/+/231397
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alessandro Arzilli <alessandro.arzilli@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
(Reland of golang.org/cl/33677.)
This CL adds a UsesCgo config setting to go/types to specify that the
_cgo_gotypes.go file generated by cmd/cgo has been provided as a
source file. The type checker then internally resolves C.bar qualified
identifiers to _Cfoo_bar as appropriate.
It also adds support to srcimporter to automatically run cgo.
Unfortunately, this functionality is not compatible with overriding
OpenFile, because cmd/cgo and gcc will directly open files.
Updates #16623.
Updates #35721.
Change-Id: Ib179d55c8c589916f98ceeae0b9a3e746157253a
Reviewed-on: https://go-review.googlesource.com/c/go/+/231459
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Cgo's initial design for handling "#define foo int*" involved
rewriting "C.foo" to "*_Ctype_int" everywhere. But now that we have
type aliases, we can declare "type _Ctype_foo = *_Ctype_int" once, and
then rewrite "C.foo" to just "_Ctype_foo".
This is important for go/types's UsesCgo mode, where go/types needs to
be able to figure out a type for each C.foo identifier using only the
information written into _cgo_gotypes.go.
Fixes#38649.
Change-Id: Ia0f8c2d82df81efb1be5bc26195ea9154c0af871
Reviewed-on: https://go-review.googlesource.com/c/go/+/230037
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add code to the loader to enforce the invariant that there is only a
single level of 'outer' symbol nesting. That is, if outer(X) = Y, then
outer(Y) is always zero.
Revise foldSubSymbolOffset based on the new invariant, allowing it to
be inlined, and then fix the various "for s.Outer != nil" loops in the
linker to just use an "if" instead of a loop.
Change-Id: Ib895702bc6de52718248f09a5368b84cb2e0a3fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/231137
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In the dev.link branch we continued developing the new object
file format support and the linker improvements described in
https://golang.org/s/better-linker . Since the last merge, more
progress has been made to improve the new linker, with
improvements on both linker speed and memory usage.
This is a clean merge.
Change-Id: I38516d6c4b41021bc61c1b9886e701de5fa2b0f1
Convert the part that uses relocations to use loader.ExtReloc
directly. It still uses sym.Symbols for now, but not sym.Relocs.
This reduces some memory usage: linking cmd/compile with external
linking,
name old allocs/op new allocs/op delta
Loadlibfull_GC 52.2MB ± 0% 13.9MB ± 0% -73.40% (p=0.008 n=5+5)
name old live-B new live-B delta
Loadlibfull_GC 75.5M ± 0% 61.9M ± 0% -18.02% (p=0.008 n=5+5)
Change-Id: I317ecbf516063c42b255b2caba310ea6281342d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/231319
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The Ctty field is a child descriptor number when Setctty is set,
but a parent descriptor when Foreground is set. This is absurd
but changing either behavior breaks existing programs.
With this change we at least document how it works.
For #29458
Change-Id: If9cf0a1a1e6ed0d4a4edae5043016d5b4ee3308b
Reviewed-on: https://go-review.googlesource.com/c/go/+/229768
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
Implement special case handling and testing to ensure
conformance with the C99 standard annex G.6 Complex arithmetic.
Fixes#29320
Change-Id: Id72eb4c5a35d5a54b4b8690d2f7176ab11028f1b
Reviewed-on: https://go-review.googlesource.com/c/go/+/220689
Reviewed-by: Robert Griesemer <gri@golang.org>
The new package "internal/unsafeheader" depends only on "unsafe", and
provides declarations equivalent to reflect.StringHeader and
reflect.SliceHeader but with Data fields of the proper unsafe.Pointer
type (instead of uintptr).
Unlike the types it replaces, the "internal/unsafeheader" package has
a regression test to ensure that its header types remain equivalent to
the declarations provided by the "reflect" package.
Since "internal/unsafeheader" has almost no dependencies, it can be
used in other low-level packages such as "syscall" and "reflect".
This change is based on the corresponding x/sys change in CL 231177.
Fixes#37805
Updates #19367
Change-Id: I7a6d93ef8dd6e235bcab94e7c47270aad047af31
Reviewed-on: https://go-review.googlesource.com/c/go/+/231223
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Now that the loader's internal storage mechanism for symbol alignment
is array-based and not map-based, we can go back to computing symbol
alignment in the parallel-by-section section of dodata.
With this patch plus the previous one, this produces a small
kubelet speedup:
$ benchstat out.devlink.txt out.align.txt
name old time/op new time/op delta
RelinkKubelet 13.3s ± 2% 13.1s ± 2% -1.27% (p=0.000 n=20+20)
RelinkKubelet-WithoutDebug 7.36s ± 5% 7.14s ± 3% -3.00% (p=0.000 n=20+20)
Change-Id: I9eb0e8fea6aeb12f188f499e9031d5a3a23232c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/231221
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Switch the storage mechanism for symbol alignment away from a map and
to a slice of uint8 values per symbol, where value K indicates
alignment 2^K. Intended to help speed up alignment get/set in dodata.
Change-Id: I26416e455c808f697dd0d7f6d2582247ee5c5b40
Reviewed-on: https://go-review.googlesource.com/c/go/+/231220
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Using 'go get x.go' instead of 'go build x.go' or some other
go command is a common mistake. By that mistake, a user gets
a misleading error message about unsuccessful `x.go` domain lookup.
This improvement handles such cases, by validating, whether the
argument hasn't specified version, has .go suffix, and either has
no slashes or such file locally exists. Handled both GOPATH
and GOMOD modes.
Fixes#38478
Change-Id: I583a4ef7f7ca8901deb07ebc811e2b3c0e828fa6
Reviewed-on: https://go-review.googlesource.com/c/go/+/229938
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
parseFloatPrefix accepts a string if it has a valid floating-point
number as prefix. Make sure that "infi", "infin", ... etc. are
accepted as valid numbers "inf" with suffix "i", "in", etc. This
is important for parsing complex numbers such as "0+infi".
This change does not affect the correctness of ParseFloat because
ParseFloat rejects strings that contain a suffix after a valid
floating-point number.
Updates #36771.
Change-Id: Ie1693a8ca2f8edf07b57688e0b35751b7100d39d
Reviewed-on: https://go-review.googlesource.com/c/go/+/231237
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, for external relocations, the ExtReloc structure
contains all the fields of the relocation. In fact, many of the
fields are the same with the original relocation. So, instead, we
can just use an index to reference the original relocation and
not expand the fields.
There is one place where we modify relocation type: changing
R_DWARFSECTREF to R_ADDR. Get away with it by changing
downstreams.
It also makes it easier to retrieve the reloc variant.
This reduces some allocation. Linking cmd/compile with external
linking,
name old alloc/op new alloc/op delta
Reloc_GC 34.1MB ± 0% 22.7MB ± 0% -33.30% (p=0.000 n=5+4)
Change-Id: Id08a89ed2aee705296886d3b95014b806a0d55cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/231217
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
In the dev.link branch we continued developing the new object
file format support and the linker improvements described in
https://golang.org/s/better-linker . Since the last merge, more
progress has been made to improve the new linker.
This is a clean merge.
Change-Id: Ide5ad6fcec9cede99e9b21c4548929b4ba1f4185
Revise the signature for "relocsym" to reflect the fact that many of
its arguments are invariant: push the invariant args into a struct and
pass the struct by reference.
Add a facility for doing batch allocation of external relocations in
relocsym, so that we don't wind up with wasted space due to the
default "append" behavior.
This produces a small speedup in linking kubelet:
$ benchstat out.devlink.txt out.dodata.txt
name old time/op new time/op delta
RelinkKubelet 14.2s ± 2% 13.8s ± 2% -3.11% (p=0.000 n=19+19)
RelinkKubelet-WithoutDebug 8.02s ± 3% 7.73s ± 3% -3.67% (p=0.000 n=20+20)
Change-Id: I8bc94c366ae792a5b0f23697b8e0108443a7a748
Reviewed-on: https://go-review.googlesource.com/c/go/+/231138
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Under the scavenge lock it's possible to ready a goroutine (or now
injectglist, which has mostly the same effect) which could cause an
unpark trace event to be emitted. If there's no active trace buffer for
the P, then we might acquire the lock. The total order between the two
is correct, but there's no partial order edge between them. Add in the
edge.
Change-Id: I3fc5d86a3b6bdd0b5648181fb76b5ebc90c3d69f
Reviewed-on: https://go-review.googlesource.com/c/go/+/231197
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
This change modifies the semantics of waking the scavenger: rather than
wake on any update to pacing, wake when we know we will have work to do,
that is, when the sweeper is done. The current scavenger runs over the
address space just once per GC cycle, and we want to maximize the chance
that the scavenger observes the most attractive scavengable memory in
that pass (i.e. free memory with the highest address), so the timing is
important. By having the scavenger awaken and reset its search space
when the sweeper is done, we increase the chance that the scavenger will
observe the most attractive scavengable memory, because no more memory
will be freed that GC cycle (so the highest scavengable address should
now be available).
Furthermore, in applications that go idle, this means the background
scavenger will be awoken even if another GC doesn't happen, which isn't
true today.
However, we're unable to wake the scavenger directly from within the
sweeper; waking the scavenger involves modifying timers and readying
goroutines, the latter of which may trigger an allocation today (and the
sweeper may run during allocation!). Instead, we do the following:
1. Set a flag which is checked by sysmon. sysmon will clear the flag and
wake the scavenger.
2. Wake the scavenger unconditionally at sweep termination.
The idea behind this policy is that it gets us close enough to the state
above without having to deal with the complexity of waking the scavenger
in deep parts of the runtime. If the application goes idle and sweeping
finishes (so we don't reach sweep termination), then sysmon will wake
the scavenger. sysmon has a worst-case 20 ms delay in responding to this
signal, which is probably fine if the application is completely idle
anyway, but if the application is actively allocating, then the
proportional sweeper should help ensure that sweeping ends very close to
sweep termination, so sweep termination is a perfectly reasonable time
to wake up the scavenger.
Updates #35788.
Change-Id: I84289b37816a7d595d803c72a71b7f5c59d47e6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/207998
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This change adds two bits of logic to the scavenger's pacing. Firstly,
it checks to make sure we scavenged at least one physical page, if we
released a non-zero amount of memory. If we try to release less than one
physical page, most systems will release the whole page, which could
lead to memory corruption down the road, and this is a signal we're in
this situation.
Secondly, the scavenger's pacing logic now checks to see if the time a
scavenging operation takes is measured to be exactly zero or negative.
The exact zero case can happen if time update granularity is too large
to effectively capture the time the scavenging operation took, like on
Windows where the OS timer frequency is generally 1ms. The negative case
should not happen, but we're being defensive (against kernel bugs, bugs
in the runtime, etc.). If either of these cases happen, we fall back to
Go 1.13 behavior: assume the scavenge operation took around 10µs per
physical page. We ignore huge pages in this case because we're in
unknown territory, so we choose to be conservative about pacing (huge
pages could only increase the rate of scavenging).
Currently, the scavenger is broken on Windows because the granularity of
time measurement is around 1 ms, which is too coarse to measure how fast
we're scavenging, so we often end up with a scavenging time of zero,
followed by NaNs and garbage values in the pacing logic, which usually
leads to the scavenger sleeping forever.
Fixes#38617.
Change-Id: Iaaa2a4cbb21338e1258d010f7362ed58b7db1af7
Reviewed-on: https://go-review.googlesource.com/c/go/+/229997
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Austin Clements <austin@google.com>
This CL changes the arm64 TBZ/TBNZ block from using Aux to using
a (typed) AuxInt. The corresponding rules have also been changed
to be typed.
Passes
GOARCH=arm64 gotip build -toolexec 'toolstash -cmp' -a std
Change-Id: I98d0cd2a791948f1db13259c17fb1b9b2807a043
Reviewed-on: https://go-review.googlesource.com/c/go/+/230839
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Tweak doDataSect to reduce symbol sorting overhead, and calculate size
ahead of allocating the ctxt.datap slice. Yields a small speedup
(2-3%) linking kubelet.
Change-Id: I82869f5276caa4bee9f6e6f41da2b240e601ce50
Reviewed-on: https://go-review.googlesource.com/c/go/+/231047
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Adddynrel2 is a function pointer. In dynrelocsym we pass &r to
it, which will cause r to escape. Pass it by value instead.
Linking cmd/compile,
name old alloc/op new alloc/op delta
Dodata_GC 15.8MB ± 0% 5.9MB ± 0% -62.55% (p=0.008 n=5+5)
Change-Id: Ib86005d1026ebaca57777b27ead037e613585f44
Reviewed-on: https://go-review.googlesource.com/c/go/+/231045
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Archreloc2 is a function pointer. It will escape its pointer
arguments. In relocsym, as we pass &r and &rr to Archreloc2, it
causes them to escape, even if Archreloc2 is not actually called.
Instead, pass r by value. loader.Reloc2 is a small structure
which is intended to be passed by value.
For rr, as Archreloc2 will likely return true, we speculatively
add it to extRelocs slice and use that space to pass to
Archreloc2.
Linking cmd/compile,
name old alloc/op new alloc/op delta
Dwarfcompress_GC 110MB ± 0% 24MB ± 0% -78.34% (p=0.008 n=5+5)
Reloc_GC 24.6MB ± 0% 0.0MB ± 0% -100.00% (p=0.029 n=4+4)
Linking cmd/compile using external linking
name old alloc/op new alloc/op delta
Reloc_GC 152MB ± 0% 36MB ± 0% -76.07% (p=0.008 n=5+5)
Change-Id: I1415479e0c17ea9787f9a62453dce00ad9ea792f
Reviewed-on: https://go-review.googlesource.com/c/go/+/231077
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
'go mod verify' checksums one module zip at a time, which is
CPU-intensive on most modern machines with fast disks. As a result, one
can see a CPU bottleneck when running the command on, for example, a
module where 'go list -m all' lists ~440 modules:
$ /usr/bin/time go mod verify
all modules verified
11.47user 0.77system 0:09.41elapsed 130%CPU (0avgtext+0avgdata 24284maxresident)k
0inputs+0outputs (0major+4156minor)pagefaults 0swaps
Instead, verify up to GOMAXPROCS zips at once, which should line up
pretty well with the amount of processors we can use on a machine. The
results below are obtained via 'benchcmd -n 5 GoModVerify go mod verify'
on the same large module.
name old time/op new time/op delta
GoModVerify 9.35s ± 1% 3.03s ± 2% -67.60% (p=0.008 n=5+5)
name old user-time/op new user-time/op delta
GoModVerify 11.2s ± 1% 16.3s ± 3% +45.38% (p=0.008 n=5+5)
name old sys-time/op new sys-time/op delta
GoModVerify 841ms ± 9% 865ms ± 8% ~ (p=0.548 n=5+5)
name old peak-RSS-bytes new peak-RSS-bytes delta
GoModVerify 27.8MB ±13% 50.7MB ±27% +82.01% (p=0.008 n=5+5)
The peak memory usage nearly doubles, and there is some extra overhead,
but it seems clearly worth the tradeoff given that we see a ~3x speedup
on my laptop with 4 physical cores. The vast majority of developer
machines nowadays should have 2-4 cores at least.
No test or benchmark is included; one can benchmark 'go mod verify'
directly, as I did above. The existing tests also cover correctness,
including any data races via -race.
Fixes#38623.
Change-Id: I45d8154687a6f3a6a9fb0e2b13da4190f321246c
Reviewed-on: https://go-review.googlesource.com/c/go/+/229817
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
A recent change added a title to the HTML coverage report but
neglected to include the package name. Add the package name here.
It's a little trickier than you'd think because there may be multiple
packages and we don't want to parse the files, so we just extract
a directory name from the path of the first file. This will almost
always be right, and has the advantage that it gives a better result
for package main. There are rare cases it will get wrong, but that
will be no hardship.
If this turns out not to be good enough, we can refine it.
Fixes#38609
Change-Id: I2201f6caef906e0b0258b90d7de518879041fe72
Reviewed-on: https://go-review.googlesource.com/c/go/+/230517
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Omits printing the file:line:column when trying to open either
* non-existent files
* files without permission
Given:
go tool compile x.go
For either of x.go not existing, or if no read permissions:
* Before:
x.go:0: open x.go: no such file or directory
x.go:0: open x.go: permission denied
* After:
open x.go: no such file or directory
open x.go: permission denied
While here, noticed an oddity with the Linux builders, that appear
to always be running under root, hence the test for permission errors
with 0222 -W-*-W-*-W- can't pass on linux-amd64 builders.
The filed bug is #38608.
Fixes#36437
Change-Id: I9645ef73177c286c99547e3a0f3719fa07b35cb5
Reviewed-on: https://go-review.googlesource.com/c/go/+/229357
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
When I browsed the source code, I saw that there is no corresponding example of this function. I am not sure if there is a need for an increase, this is my first time to submit CL.
Change-Id: Idbf4e1e1ed2995176a76959d561e152263a2fd26
Reviewed-on: https://go-review.googlesource.com/c/go/+/230741
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The switch statement can be statically optimized by the compiler,
whereas similarly optimizing the map index expression would require
additional compiler analysis to detect the map is never mutated.
Updates #10848.
Change-Id: I2fc70d4a34dc545677b99f218b51023c7891bbbd
Reviewed-on: https://go-review.googlesource.com/c/go/+/231041
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, we emit stack maps and register maps at almost every
instruction. This was originally intended to support non-cooperative
preemption, but was only ever used for debug call injection. Now debug
call injection also uses conservative frame scanning. As a result,
stack maps are only needed at call sites and register maps aren't
needed at all except that we happen to also encode unsafe-point
information in the register map PCDATA stream.
This CL reduces stack maps to only appear at calls, and replace full
register maps with just safe/unsafe-point information.
This is all protected by the go115ReduceLiveness feature flag, which
is defined in both runtime and cmd/compile.
This CL significantly reduces binary sizes and also speeds up compiles
and links:
name old exe-bytes new exe-bytes delta
BinGoSize 15.0MB ± 0% 14.1MB ± 0% -5.72%
name old pcln-bytes new pcln-bytes delta
BinGoSize 3.14MB ± 0% 2.48MB ± 0% -21.08%
name old time/op new time/op delta
Template 178ms ± 7% 172ms ±14% -3.59% (p=0.005 n=19+19)
Unicode 71.0ms ±12% 69.8ms ±10% ~ (p=0.126 n=18+18)
GoTypes 655ms ± 8% 615ms ± 8% -6.11% (p=0.000 n=19+19)
Compiler 3.27s ± 6% 3.15s ± 7% -3.69% (p=0.001 n=20+20)
SSA 7.10s ± 5% 6.85s ± 8% -3.53% (p=0.001 n=19+20)
Flate 124ms ±15% 116ms ±22% -6.57% (p=0.024 n=18+19)
GoParser 156ms ±26% 147ms ±34% ~ (p=0.070 n=19+19)
Reflect 406ms ± 9% 387ms ±21% -4.69% (p=0.028 n=19+20)
Tar 163ms ±15% 162ms ±27% ~ (p=0.370 n=19+19)
XML 223ms ±13% 218ms ±14% ~ (p=0.157 n=20+20)
LinkCompiler 503ms ±21% 484ms ±23% ~ (p=0.072 n=20+20)
ExternalLinkCompiler 1.27s ± 7% 1.22s ± 8% -3.85% (p=0.005 n=20+19)
LinkWithoutDebugCompiler 294ms ±17% 273ms ±11% -7.16% (p=0.001 n=19+18)
(https://perf.golang.org/search?q=upload:20200428.8)
The binary size improvement is even slightly better when you include
the CLs leading up to this. Relative to the parent of "cmd/compile:
mark PanicBounds/Extend as calls":
name old exe-bytes new exe-bytes delta
BinGoSize 15.0MB ± 0% 14.1MB ± 0% -6.18%
name old pcln-bytes new pcln-bytes delta
BinGoSize 3.22MB ± 0% 2.48MB ± 0% -22.92%
(https://perf.golang.org/search?q=upload:20200428.9)
For #36365.
Change-Id: I69448e714f2a44430067ca97f6b78e08c0abed27
Reviewed-on: https://go-review.googlesource.com/c/go/+/230544
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
These are necessarily deeply non-preemptible, so there's no point in
emitting stack maps for them. We already mark them as unsafe points,
so this only affects the runtime, since user code does not emit stack
maps at unsafe points. SSAGenState.PrepareCall also excludes them when
it's sanity checking call stack maps.
Right now this only drops a handful of unnecessary stack maps from the
runtime, but we're about to start emitting stack maps only at calls
for user code, too. At that point, this will matter much more.
For #36365.
Change-Id: Ib3abfedfddc8e724d933a064fa4d573500627990
Reviewed-on: https://go-review.googlesource.com/c/go/+/230542
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The compiler currently conflates whether a Value has a stack map with
whether it's an unsafe point. For the most part, unsafe-points don't
have stack maps, so this is mostly fine, but call instructions can be
both an unsafe-point *and* have a stack map. For example, none of the
instructions in a nosplit function should be preemptible, but calls
must still have stack maps in case the called function grows the stack
or get preempted.
Currently, the compiler can't distinguish this case, so calls in
nosplit functions are marked as safe-points just because they have
stack maps. This is particularly problematic if a nosplit function
calls another nosplit function, since this can introduce a preemption
point where there should be none.
We realized this was a problem for split-stack prologues a while back,
and CL 207349 changed the encoding of unsafe-points to use the
register map index instead of the stack map index so we could record
both a stack map and an unsafe-point at the same instruction. But this
was never extended into the compiler.
This CL fixes this problem in the compiler. We make LivenessIndex
slightly more abstract by separating unsafe-point marks from stack and
register map indexes. We map this to the PCDATA encoding later when
producing Progs. This isn't enough to fix the whole problem for
nosplit functions, because obj still adds prologues and marks those as
preemptible, but it's a step in the right direction.
I checked this CL by comparing maps before and after this change in
the runtime and net/http. In net/http, unsafe-points match exactly; at
anything that isn't an unsafe-point, both the stack and register maps
are unchanged by this CL. In the runtime, at every point that was a
safe-point before this change, the stack maps agree (and mostly the
runtime doesn't have register maps at all now). In both, all CALLs
(except write barrier calls) have stack maps.
For #36365.
Change-Id: I066628938b02e78be5c81a6614295bcf7cc566c2
Reviewed-on: https://go-review.googlesource.com/c/go/+/230541
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, this function conflates two (easily conflated!) concepts:
whether a Value is a safe-point and whether it has a stack map. In
particular, call Values may not be a safe-point, but may need a stack
map anyway in case the called function grows the stack.
Hence, rename this function to "hasStackMap", since that's really what
it represents.
For #36365.
Change-Id: I89839de0be8db3be3f0d3a7fb5fcf0b0b6ebc98a
Reviewed-on: https://go-review.googlesource.com/c/go/+/230540
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
PanicBounds and PanicExtend are lowered to runtime calls (with a
non-Go ABI), but are not currently marked as calls. Since liveness
analysis only emits stack maps at calls in the runtime, this means
these panic call sites in the runtime won't get a stack map. These
almost immediately turn into throws in the runtime, but there's still
a chance they'll try to grow the stack first, which would lead to a
different panic.
To fix this, mark these operations as calls.
Outside the runtime, we currently emit stack maps for everything that
isn't an unsafe-point, so these panic calls get stack maps by default.
However, we're about to move to emitting stack maps only at call
sites, at which point this will start to matter outside the runtime as
well.
I confirmed that this has no effect on anything but PCDATA/FUNCDATA in
runtime and net/http.
For #36365.
Change-Id: Ic5bb463fd152cc320c815dc04cf62005261ae169
Reviewed-on: https://go-review.googlesource.com/c/go/+/230539
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
A debugger can inject a call at almost any PC, which causes
significant complications with stack scanning and growth. Currently,
the runtime solves this using precise stack maps and register maps at
nearly all PCs, but these extra maps require roughly 5% of the binary.
These extra maps were originally considered worth this space because
they were intended to be used for non-cooperative preemption, but are
now used only for debug call injection.
This CL switches from using precise maps to instead using conservative
frame scanning, much like how non-cooperative preemption works. When a
call is injected, the runtime flushes all potential pointer registers
to the stack, and then treats that frame as well as the interrupted
frame conservatively.
The limitation of conservative frame scanning is that we cannot grow
the goroutine stack. That's doable because the previous CL switched to
performing debug calls on a new goroutine, where they are free to grow
the stack.
With this CL, there are no remaining uses of precise register maps
(though we still use the unsafe-point information that's encoded in
the register map PCDATA stream), and stack maps are only used at call
sites.
For #36365.
Change-Id: Ie217b6711f3741ccc437552d8ff88f961a73cee0
Reviewed-on: https://go-review.googlesource.com/c/go/+/229300
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, when a debugger injects a call, that call happens on the
goroutine where the debugger injected it. However, this requires
significant runtime complexity that we're about to remove.
To prepare for this, this CL switches to a different approach that
leaves the interrupted goroutine parked and runs the debug call on a
new goroutine. When the debug call returns, it resumes the original
goroutine.
This should be essentially transparent to debuggers. It follows the
exact same call injection protocol and ensures the whole protocol
executes indivisibly on a single OS thread. The only difference is
that the current G and stack now change part way through the protocol.
For #36365.
Change-Id: I68463bfd73cbee06cfc49999606410a59dd8f653
Reviewed-on: https://go-review.googlesource.com/c/go/+/229299
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, newproc1 allocates, initializes, and schedules a new
goroutine. We're about to change debug call injection in a way that
will need to create a new goroutine without immediately scheduling it.
To prepare for that, make scheduling the responsibility of newproc1's
caller. Currently, there's exactly one caller (newproc), so this
simply shifts that responsibility.
For #36365.
Change-Id: Idacd06b63e738982e840fe995d891bfd377ce23b
Reviewed-on: https://go-review.googlesource.com/c/go/+/229298
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
golang.org/cl/229763 removed the documentation of requirements of
the function passed to FieldsFunc. The current implementation does
not require functions to return consistent results but this had not
been the case for previous implementations.
Add the requirement for consistent results back to the documentation
to allow for future implementations to be more allocation efficient
for an output with more than 32 fields. This is possible with a two
pass algorithm first determining the number of fields used to allocate
the output slice and then splitting the input into fields.
While at it align the documentation of bytes.FieldsFunc with
strings.FieldFunc.
Fixes#38630
Change-Id: Iabbf9ca3dff0daa41f4ec930a21a3dd98e19f122
Reviewed-on: https://go-review.googlesource.com/c/go/+/230797
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
When then go command is run with -trimpath, it will now use
-fdebug-prefix-map when invoking the C compiler (if supported) to
replace the source root directory with a dummy root directory.
This should prevent source directories from appearing either literally
or in compressed DWARF in linked binaries.
Updates #36072
Change-Id: Iedd08d5e886f81e981f11248a1be4ed4f58bdd29
Reviewed-on: https://go-review.googlesource.com/c/go/+/212101
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This allows writing
// F does a thing.
//go:noinline
func F()
without the //go:noinline or other directive (such as //line)
ending up looking like extra words in the doc comment.
Fixes#37974.
Change-Id: Ic738d72802cc2fa448f7633915e7126d2f76d8ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/224737
Reviewed-by: Robert Griesemer <gri@golang.org>
When parsing go.mod files found via file-path replacements, it's safer to
use lockedfile.Read instead of ioutil.ReadFile, in case of overwriting by
other concurrent go commands.
Change-Id: I7dcac3bb5ada84bee1eb634b39f813c461ef103a
Reviewed-on: https://go-review.googlesource.com/c/go/+/230838
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Previously, non-standard attributes in Name.Names were being
omitted when printed using Name.String(). Now, any non-standard
attributes that would not already be printed in Name.String()
are being added temporarily to Name.ExtraNames to be printed.
Fixes#33094Fixes#23069
Change-Id: Id9829c20968e16db7194549f69c0eb5985044944
Reviewed-on: https://go-review.googlesource.com/c/go/+/229864
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Once the symbol is compressed, we will not need the uncompressed
symbol content. Free its memory.
Linking cmd/compile,
name old live-B new live-B delta
Dwarfcompress_GC 42.7M ± 0% 37.9M ± 0% -11.31% (p=0.008 n=5+5)
Change-Id: Ib6cc73832946d158ff4f5b4f31be9c35ba7cf103
Reviewed-on: https://go-review.googlesource.com/c/go/+/230859
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
After LoadFull, we'll be using sym.Symbols mostly. We still need
the loader information for symbol index mappings and name
lookups, but not much else. Free some memory.
Linking cmd/compile,
name old time/op new time/op delta
Loadlibfull_GC 44.5M ± 0% 35.8M ± 0% -19.66% (p=0.008 n=5+5)
Archive_GC 46.4M ± 0% 37.6M ± 0% -18.89% (p=0.008 n=5+5)
Linking cmd/compile with external linking,
name old time/op new time/op delta
Loadlibfull_GC 82.5M ± 0% 57.4M ± 0% -30.41% (p=0.008 n=5+5)
Archive_GC 86.8M ± 0% 61.7M ± 0% -28.90% (p=0.008 n=5+5)
Change-Id: I6859d488172ef8968918b86de527fbfed6832ebf
Reviewed-on: https://go-review.googlesource.com/c/go/+/230300
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
When applying relocations, we need to resolve ABI aliases.
relocsym does that. Architecture-specific archreloc also needs to
do that. The old code doesn't do that since ABI aliases are
resolved in loadlibfull, or, in the old linker, in a much earlier
stage. We don't do this in the new linker, as we want to avoid
mutating relocations.
While here, move R_CONST and R_GOTOFF handling to generic code.
They appear on several architectures and the handling are same.
Should fix 386-clang and *bsd-386 builds.
Change-Id: I6681c94f0327555d6cf329d0a518c88848773671
Reviewed-on: https://go-review.googlesource.com/c/go/+/230857
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Remove 'Sub' field from sym.Symbol, replacing uses (those downstream of
loadlibfull) with loader method calls.
NB: removing the Outer field will have to wait for now; it is accessed
in archreloc methods that don't have access to link ctxt or loader
currently.
Change-Id: I2abe5906fc169c64b2ab7d5ad213619bea5a17c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/230617
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This updates the PPC64.rules file to use the MOD instructions
that are available in power9. Prior to power9 this is done
using a longer sequence with multiply and divide.
Included in this change is removal of the REM* opcode variations
that set the CC or OV bits since their settings are based
on the DIV and are not appropriate for the REM.
Change-Id: Iceed9ce33e128e1911c15592ee674276ce8ba3fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/229761
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Prior to this commit, NewXxx could panic when passed an image.Rectangle
with one of width or height being negative. But it might not panic if
both were negative, because (bpp * w * h) could still be positive. After
this commit, it will panic if both are negative.
With overflow, NewXxx might not have panicked if (bpp * w * h), the
length passed to "make([]uint8, length)", was still non-negative (after
truncation), but even if w and h were valid (non-negative), the overall
byte slice wasn't long enough. Iterating over the pixels would possibly
panic later with index out of bounds. This change moves the panic
earlier, closer to where the mistake is.
Change-Id: I011feb2d53515fc3f0fe72bb6c23b3953772c577
Reviewed-on: https://go-review.googlesource.com/c/go/+/230220
Reviewed-by: Rob Pike <r@golang.org>
Convert some optimizations rules to strongly-typed versions. Similar to
CL 230338, this CL only converts rules that need no additional changes
(i.e: only need to change '->' to '=>').
This CL covers the rules from line 800 - 1219.
Passes toolstash-check
Change-Id: I94181a809fa38918b78301f1c0c680b7a8ab552f
Reviewed-on: https://go-review.googlesource.com/c/go/+/230738
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, looking up only IPv4 or IPv6 addresses was only possible
with DefaultResolver via ResolveIPAddr. Add this functionality to the
Resolver type with a new method, LookupIP. This largely brings Resolver
functionally to parity with the global functions. The name LookupIP is
used over ResolveIPAddr to be consistent with the other Resolver
methods.
There are two main benefits to (*Resolver).LookupIP over
(*Resolver).LookupHost. First is an ergonomic benefit. Wanting a
specific family of address is common enough to justify a method, evident
by the existence of ResolveIPAddr. Second, this opens the possibility of
not performing unnecessary DNS requests when only a specific family of
addresses are needed. This optimization is left to follow up work.
Updates #30452
Change-Id: I241f61019588022a39738f8920b0ddba900cecdd
Reviewed-on: https://go-review.googlesource.com/c/go/+/228641
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Allocate the runcases slice on the stack if the number
of select cases is small (up to 4).
Found while looking at production profiles of common
proto based RPC server framework code in Google which do
not have a large number of cases.
name old time/op new time/op delta
Select/1 147ns ± 2% 120ns ± 6% -18.32% (p=0.000 n=7+10)
Select/4 316ns ± 5% 249ns ± 2% -21.23% (p=0.000 n=10+10)
Select/8 516ns ± 3% 515ns ± 3% ~ (p=0.858 n=10+9)
name old alloc/op new alloc/op delta
Select/1 96.0B ± 0% 64.0B ± 0% -33.33% (p=0.000 n=10+10)
Select/4 336B ± 0% 208B ± 0% -38.10% (p=0.000 n=10+10)
Select/8 672B ± 0% 672B ± 0% ~ (all equal)
name old allocs/op new allocs/op delta
Select/1 4.00 ± 0% 3.00 ± 0% -25.00% (p=0.000 n=10+10)
Select/4 7.00 ± 0% 6.00 ± 0% -14.29% (p=0.000 n=10+10)
Select/8 11.0 ± 0% 11.0 ± 0% ~ (all equal)
Change-Id: I1687e74fc8e86606a27f03fa8a561bcfb68775d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/230657
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Opening a connection with Connect should still create a derived
context with a timeout because some clients will not use a timeout
and the connection pool may open a connection asynchronously.
Likewise, if a connection close makes a network operation it should
provide some type of sane timeout for the operation.
Fixes#38185
Change-Id: I9b7ce2996c81c486170dcc84b12672a99610fa27
Reviewed-on: https://go-review.googlesource.com/c/go/+/230438
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Remove the "ElfSym" and "LocalElfSym" fields from sym.Symbol,
replacing uses with loader method calls as needed.
Change-Id: I3828f13203ece2bdc03eeb09ab37a5c94e21a726
Reviewed-on: https://go-review.googlesource.com/c/go/+/230462
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Add new get/set methods to the loader for recording the ELF symbol
index for a given loader symbol. These are map-based, since it is
expected that many/most symbols will not need an ELF symbol table
entry.
Change-Id: I1102c3637775515ccc6650118e8b059468a2c3ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/230461
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Remove the 'Gotype' field from sym.Symbol, as it is now no longer
used. Store the loader.Sym for a symbol as a field in sym.Symbol
("SymIdx"). Then remove sym.Symbol 'File' field, and replace the field
accesses in question with calls into the loader instead.
Change-Id: I01c5504425006b8d3fe77fac2b69a86e198c7a5a
Reviewed-on: https://go-review.googlesource.com/c/go/+/230304
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The span set data structure may leak blocks due to a race in the logic
to check whether it's safe to free a block. The simplest example of this
race is between two poppers:
1. Popper A claims slot spanSetEntries-2.
2. Popper B claims slot spanSetEntries-1.
3. Popper A gets descheduled before it subtracts from block.used.
4. Popper B subtracts from block.used, sees that claimed
spanSetEntries-1, but also that block.used != 0, so it returns.
5. Popper A comes back and subtracts from block.used, but it didn't
claim spanSetEntries-1 so it also returns.
The spine is left with a stale block pointer and the block later gets
overwritten by pushes, never to be re-used again.
The problem here is that we designate the claimer of slot
spanSetEntries-1 to be the one who frees the block, but that may not be
the thread that actually does the last subtraction from block.used.
Fixing this problem is tricky, and the fundamental problem there is that
block.used is not stable: it may be observed to be zero, but that
doesn't necessarily mean you're the last popper!
Do something simpler: keep a counter of how many pops have happened to a
given block instead of block.used. This counter monotonically increases
when a pop is _completely done_. Because this counter is monotonically
increasing, and only increases when a popper is done, then we know for
sure whichever popper is the last to increase it (i.e. its value is
spanSetBlockEntries) is also the last popper in the block. Because the
race described above still exists, the last popper may not be the one
which claimed the last slot in the block, but we know for certain nobody
else is popping from that block anymore so we can safely free it.
Finally, because pops serialize with pushes to the same slot, we need
not worry about concurrent pushers at all.
Updates #37487.
Change-Id: I6697219372774c8ca7d8ee6895eaa230a64ce9e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/230497
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make Wasm more like other architectures, writing data sections to
heap in Asmb instead of Asmb2. Then we can remove the
copy-on-write logic in applying relocations.
Change-Id: I26d5315ea9fba032fe4bdb9b5c7fe483611c4373
Reviewed-on: https://go-review.googlesource.com/c/go/+/230465
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Currently mcaches are flushed to mcentral after a bunch of memstats have
already been read. This is not safe (in the sense that it doesn't ensure
consisent memstats) since memstats may in general change when mcentral
data structures are manipulated.
Note that prior to the new mcentral implementation this was not a
problem because mcentral operations happened to never modify certain
memstats. As of the new mcentral implementation, we might for example
persistentalloc when uncaching a span, which would change memstats. This
can cause a skew between the value of sys (which currently is calculated
before mcaches are flushed) and the value of gc_sys and other_sys.
Fix this by moving mcache flushing to the very top of updatememstats.
Also leave a comment explaining that this must be done first, in
general, because mcentrals make no guarantee that they will not
influence memstats (and doing so would be unnecessarily restrictive).
Fixes#38712.
Change-Id: I15bacb313c54a46e380a945a71bb75db67169c1b
Reviewed-on: https://go-review.googlesource.com/c/go/+/230498
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
This is a second attempt at CL 230024, with
cmd/go/testdata/script/mod_retention.txt updated to perform a
version-independent comparison on the 'go' version added to a go.mod
file that lacks one.
Fixes#38708
Change-Id: I15dcd83b51ed5ec57946b419bcbaec41e85a46f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/230382
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Convert some optimizations rules to strongly-typed versions. So far, I
have only converted the rules that need no additional changes (i.e: only
need to change '->' to "=>").
This CL covers the rules from line 478 - line 800 in S390X.rules file.
Some compare and branch rules also fall in this range, but they were
already done previously in another CL.
Passes toolstash-check.
Change-Id: I9167c5f1a32f4fd6c29bacc13fff95e83b0533e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/230338
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The compiler has better error messages for methods called without a
pointer receiver when one is expected. This change is similar to
CL 229801, but for method calls.
Also, added better error messages for functions called with the wrong
capitalization. I left the third TODO in this switch statement almost
as-is because I'm not sure that the extra complexity is worth it -
I adjusted the error to look like the one the compiler reports.
Fixesgolang/go#38658
Change-Id: Ie0ca2503e12f3659f112f0135cc27db1b027fdcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/230380
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Linux 4.5 introduced (and Linux 5.3 refined) the copy_file_range
system call, which allows file systems the opportunity to implement
copy acceleration techniques. This commit adds support for
copy_file_range(2) to the os package.
Introduce a new ReadFrom method on *os.File, which makes *os.File
implement the io.ReaderFrom interface. If dst and src are both files,
this enables io.Copy(dst, src) to call dst.ReadFrom(src), which, in
turn, will call copy_file_range(2) if possible. If copy_file_range(2)
is not supported by the host kernel, or if either of dst or src
refers to a non-regular file, ReadFrom falls back to the regular
io.Copy code path.
Add internal/poll.CopyFileRange, which acquires locks on the
appropriate poll.FDs and performs the actual work, as well as
internal/syscall/unix.CopyFileRange, which wraps the copy_file_range
system call itself at the lowest level.
Rework file layout in internal/syscall/unix to accomodate the
additional system call numbers needed for copy_file_range.
Merge these definitions with the ones used by getrandom(2) into
sysnum_linux_$GOARCH.go files.
A note on additional optimizations: if dst and src both refer to pipes
in the invocation dst.ReadFrom(src), we could, in theory, use the
existing splice(2) code in package internal/poll to splice directly
from src to dst. Attempting this runs into trouble with the poller,
however. If we call splice(src, dst) and see EAGAIN, we cannot know
if it came from src not being ready for reading or dst not being
ready for writing. The write end of src and the read end of dst are
not under our control, so we cannot reliably use the poller to wait
for readiness. Therefore, it seems infeasible to use the new ReadFrom
method to splice between pipes directly. In conclusion, for now, the
only optimization enabled by the new ReadFrom method on *os.File is
the copy_file_range optimization.
Fixes#36817.
Change-Id: I696372639fa0cdf704e3f65414f7321fc7d30adb
Reviewed-on: https://go-review.googlesource.com/c/go/+/229101
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
IntSize is an untyped constant that does not need explicit conversion.
Annotating IntSize as an int and running github.com/mdempsky/unconvert
reveals these two cases.
Fixes#38682.
Change-Id: I014646b7457ddcde32474810153229dcf0c269c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/230306
Run-TryBot: Akhil Indurti <aindurti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently allocToCache assumes it can move the search address past the
block it allocated the cache from, which violates the property that
searchAddr should always point to mapped memory (i.e. memory represented
by pageAlloc.inUse).
This bug was already fixed once for pageAlloc.alloc in the Go 1.14
release via CL 216697, but that changed failed to take into account
allocToCache.
Fixes#38605.
Change-Id: Id08180aa10d19dc0f9f551a1d9e327a295560dff
Reviewed-on: https://go-review.googlesource.com/c/go/+/229577
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Originally, we use an assembly function that returns a boolean result to
tell whether the machine has vector facility or not. It is now no longer
needed when we can directly use cpu.S390X.HasVX variable. This CL
also removes the last occurence of hasVectorFacility function on s390x.
Change-Id: Id20cb746c21eacac5e13344b362e2d87adfe4317
Reviewed-on: https://go-review.googlesource.com/c/go/+/230337
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In dodata we overwrite symbol types to SDATA. Now we'll stop
doing that, so accept more symbol types here. This is basically
a list of all writeable types handled in dodata that could appear
in XCOFF.
Change-Id: Iee35369162f5acd59806a3f0e6c8d3682620067e
Reviewed-on: https://go-review.googlesource.com/c/go/+/230310
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Originally, we use an assembly function that returns a boolean result to
tell whether the machine has vector facility or not. It is now no longer
needed when we can directly use cpu.S390X.HasVX variable.
Change-Id: Ic1dae851982532bcfd9a9453416c112347f21d87
Reviewed-on: https://go-review.googlesource.com/c/go/+/230318
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Originally, we use an assembly function that returns a boolean result to
tell whether the machine has vector facility or not. It is now no longer
needed when we can directly use cpu.S390X.HasVX variable.
Change-Id: Ic3ffeb9e63238ef41406d97cdc42502145ddb454
Reviewed-on: https://go-review.googlesource.com/c/go/+/230319
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL allows the usage of KDSA instruction when it is available. The
instruction is designed to be resistant to side channel attacks and
offers performance improvement for ed25519.
Benchmarks:
name old time/op new time/op delta
Signing-8 120µs ±20% 62µs ±12% -48.40% (p=0.000 n=10+10)
Verification-8 325µs ±17% 69µs ±10% -78.80% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
Signing-8 448B ± 0% 0B -100.00% (p=0.000 n=10+10)
Verification-8 288B ± 0% 0B -100.00% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
Signing-8 5.00 ± 0% 0.00 -100.00% (p=0.000 n=10+10)
Verification-8 2.00 ± 0% 0.00 -100.00% (p=0.000 n=10+10)
Change-Id: I0330ce83d807370b419ce638bc2cae4cb3c250dc
Reviewed-on: https://go-review.googlesource.com/c/go/+/202578
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Currently, the small object sweeper will sweep until it finds a free
slot or there are no more spans of that size class to sweep. In dense
heaps, this can cause sweeping for a given size class to take
unbounded time, and gets worse with larger heaps.
This CL limits the small object sweeper to try at most 100 spans
before giving up and allocating a fresh span. Since it's already shown
that 100 spans are completely full at that point, the space overhead
of this fresh span is at most 1%.
This CL is based on an experimental CL by Austin Clements (CL 187817)
and is updated to be part of the mcentral implementation, gated by
go115NewMCentralImpl.
Updates #18155.
Change-Id: I37a72c2dcc61dd6f802d1d0eac3683e6642b6ef8
Reviewed-on: https://go-review.googlesource.com/c/go/+/229998
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Currently mcentral is implemented as a couple of linked lists of spans
protected by a lock. Unfortunately this design leads to significant lock
contention.
The span ownership model is also confusing and complicated. In-use spans
jump between being owned by multiple sources, generally some combination
of a gcSweepBuf, a concurrent sweeper, an mcentral or an mcache.
So first to address contention, this change replaces those linked lists
with gcSweepBufs which have an atomic fast path. Then, we change up the
ownership model: a span may be simultaneously owned only by an mcentral
and the page reclaimer. Otherwise, an mcentral (which now consists of
sweep bufs), a sweeper, or an mcache are the sole owners of a span at
any given time. This dramatically simplifies reasoning about span
ownership in the runtime.
As a result of this new ownership model, sweeping is now driven by
walking over the mcentrals rather than having its own global list of
spans. Because we no longer have a global list and we traditionally
haven't used the mcentrals for large object spans, we no longer have
anywhere to put large objects. So, this change also makes it so that we
keep large object spans in the appropriate mcentral lists.
In terms of the static lock ranking, we add the spanSet spine locks in
pretty much the same place as the mcentral locks, since they have the
potential to be manipulated both on the allocation and sweep paths, like
the mcentral locks.
This new implementation is turned on by default via a feature flag
called go115NewMCentralImpl.
Benchmark results for 1 KiB allocation throughput (5 runs each):
name \ MiB/s go113 go114 gotip gotip+this-patch
AllocKiB-1 1.71k ± 1% 1.68k ± 1% 1.59k ± 2% 1.71k ± 1%
AllocKiB-2 2.46k ± 1% 2.51k ± 1% 2.54k ± 1% 2.93k ± 1%
AllocKiB-4 4.27k ± 1% 4.41k ± 2% 4.33k ± 1% 5.01k ± 2%
AllocKiB-8 4.38k ± 3% 5.24k ± 1% 5.46k ± 1% 8.23k ± 1%
AllocKiB-12 4.38k ± 3% 4.49k ± 1% 5.10k ± 1% 10.04k ± 0%
AllocKiB-16 4.31k ± 1% 4.14k ± 3% 4.22k ± 0% 10.42k ± 0%
AllocKiB-20 4.26k ± 1% 3.98k ± 1% 4.09k ± 1% 10.46k ± 3%
AllocKiB-24 4.20k ± 1% 3.97k ± 1% 4.06k ± 1% 10.74k ± 1%
AllocKiB-28 4.15k ± 0% 4.00k ± 0% 4.20k ± 0% 10.76k ± 1%
Fixes#37487.
Change-Id: I92d47355acacf9af2c41bf080c08a8c1638ba210
Reviewed-on: https://go-review.googlesource.com/c/go/+/221182
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This change implements the spanSet data structure which is based off of
the gcSweepBuf data structure. While the general idea is the same (one
has two of these which one switches between every GC cycle; one to push
to and one to pop from), there are some key differences.
Firstly, we never have a need to iterate over this data structure so
delete numBlocks and block. Secondly, we want to be able to pop from the
front of the structure concurrently with pushes to the back. As a result
we need to maintain both a head and a tail and this change introduces an
atomic headTail structure similar to the one used by sync.Pool. It also
implements popfirst in a similar way.
As a result of this headTail, we need to be able to explicitly reset the
length, head, and tail when it goes empty at the end of sweep
termination, so add a reset method.
Updates #37487.
Change-Id: I5b8ad290ec32d591e3c8c05e496c5627018074f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/221181
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This change adds a global pool of spanSetBlocks to the spanSet data
structure and adds support for eagerly freeing these blocks back to the
pool if the block goes empty.
This change prepares us to use this data structure in more places in the
runtime by allowing reuse of spanSetBlock.
Updates #37487.
Change-Id: I0752226e3667a9e3e1d87c9b66edaedeae1ac23f
Reviewed-on: https://go-review.googlesource.com/c/go/+/221180
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This change copies the gcSweepBuf data structure into a new file and
renames it spanSet. It will serve as the basis for a heavily modified
version of the gcSweepBuf data structure for the new mcentral
implementation.
We move it into a separate file now for two reasons:
1. We will need both implementations as they will coexist simultaneously
for a time.
2. By creating it now in a new change it'll make future changes which
modify it easier to review (rather than introducing the new file then).
Updates #37487.
Change-Id: If80603cab6e813a1ee2e5ecd49dcde5d8045a6c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/221179
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Implement multi-control branches for riscv64, switching to using the BNEZ
pseudo-instruction when rewriting conditionals. This will allow for further
branch optimisations to later be performed via rewrites.
Change-Id: I7f2c69f3c77494b403f26058c6bc8432d8070ad0
Reviewed-on: https://go-review.googlesource.com/c/go/+/226399
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Joel Sing <joel@sing.id.au>
type T [3]string
Prior to this change, we generated this equality alg for T:
func eqT(p, q *T) (r bool) {
for i := range *p {
if len(p[i]) == len(q[i]) {
} else {
return
}
}
for j := range *p {
if runtime.memeq(p[j].ptr, q[j].ptr, len(p[j])) {
} else {
return
}
}
return true
}
That first loop can be profitably eliminated;
it's cheaper to spell out 3 length equality checks.
We now generate:
func eqT(p, q *T) (r bool) {
if len(p[0]) == len(q[0]) &&
len(p[1]) == len(q[1]) &&
len(p[2]) == len(q[2]) {
} else {
return
}
for i := 0; i < len(p); i++ {
if runtime.memeq(p[j].ptr, q[j].ptr, len(p[j])) {
} else {
return
}
}
return true
}
We now also eliminate loops for small float arrays as well,
and for any array of size 1.
These cutoffs were selected to minimize code size on amd64
at this moment, for lack of a more compelling methodology.
Any smallish number would do.
The switch from range loops to plain for loops allowed me
to use a temp instead of a named var, which eliminated
a pointless argument to checkAll.
The code to construct them is also a bit clearer, in my opinion.
Change-Id: I1bdd8ee4a2739d00806e66b17a4e76b46e71231a
Reviewed-on: https://go-review.googlesource.com/c/go/+/230210
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add linux/{ppc64,ppc64le} and aix/ppc64 arch support for the new
dodata() phase.
This completes the picture in terms of architecture support for the
new dodata(), but to be safe this patch leaves the command line flag
in place there are problems on the builders (especially given that we
have a dead aix-ppc64 builder).
Change-Id: I78da615c3b540d8925ed7b3226e199280eb7451d
Reviewed-on: https://go-review.googlesource.com/c/go/+/229983
Reviewed-by: Cherry Zhang <cherryyz@google.com>
type T [8]string
Prior to this change, we generated this equality algorithm for T:
func eqT(p, q *T) (r bool) {
for i := range *p {
if p[i] == q[i] {
} else {
return
}
}
return true
}
This change splits this into two loops, so that we can do the
cheap (length) half early and only then do the expensive (contents) half.
We now generate:
func eqT(p, q *T) (r bool) {
for i := range *p {
if len(p[i]) == len(q[i]) {
} else {
return
}
}
for j := range *p {
if runtime.memeq(p[j].ptr, q[j].ptr, len(p[j])) {
} else {
return
}
}
return true
}
The generated code is typically ~17% larger because it contains
two loops instead of one. In the future, we might want to unroll
the first loop when the array is small.
Change-Id: I26b2793b90ec6aff21766a411b15a4ff1096c03f
Reviewed-on: https://go-review.googlesource.com/c/go/+/230209
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
type T [8]interface{}
Prior to this change, we generated this equality algorithm for T:
func eqT(p, q *T) bool {
for i := range *p {
if p[i] != q[i] {
return false
}
}
return true
}
This change splits this into two loops, so that we can do the
cheap (type) half early and only then do the expensive (data) half.
We now generate:
func eqT(p, q *T) (r bool) {
for i := range *p {
if p[i].type == q[i].type {
} else {
return
}
}
for j := range *p {
if runtime.efaceeq(p[j].type, p[j].data, q[j].data) {
} else {
return
}
}
return true
}
The use of a named return value and a bare return is to work
around some typechecking problems that stymied me.
The structure of using equals and else (instead of not equals and then)
was for implementation convenience and clarity. As a bonus,
it generates slightly shorter code on AMD64, because zeroing a register
to return is cheaper than writing $1 to it.
The generated code is typically ~17% larger because it contains
two loops instead of one. In the future, we might want to unroll
the first loop when the array is small.
Change-Id: I5b2c8dd3384852f085c4f3e1f6ad20bc5ae59062
Reviewed-on: https://go-review.googlesource.com/c/go/+/230208
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
type T struct {
s interface{}
i int
}
Prior to this change, we generated this equality algorithm for T:
func eqT(p, q *T) bool {
return p.s.type == q.s.type &&
runtime.efaceeq(p.s.type, p.s.data, q.s.data) &&
p.i == q.i
}
This change splits the two halves of the interface equality,
so that we can do the cheap (type) half early and the expensive
(data) half late. We now generate:
func eqT(p, q *T) bool {
return p.s.type == q.s.type &&
p.i == q.i &&
runtime.efaceeq(p.s.type, p.s.data, q.s.data)
}
The generated code tends to be a bit smaller. Examples:
go/ast
.eq."".ForStmt 306 -> 304 (-0.65%)
.eq."".TypeAssertExpr 221 -> 219 (-0.90%)
.eq."".TypeSwitchStmt 228 -> 226 (-0.88%)
.eq."".ParenExpr 150 -> 148 (-1.33%)
.eq."".IndexExpr 221 -> 219 (-0.90%)
.eq."".SwitchStmt 228 -> 226 (-0.88%)
.eq."".RangeStmt 334 -> 332 (-0.60%)
Change-Id: Iec9e24f214ca772416202b9fb9252e625c22380e
Reviewed-on: https://go-review.googlesource.com/c/go/+/230207
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
type T struct {
s string
i int
}
Prior to this change, we generated this equality algorithm for T:
func eqT(p, q *T) bool {
return len(p.s) == len(q.s) &&
runtime.memequal(p.s.ptr, q.s.ptr, len(p.s)) &&
p.i == q.i
}
This change splits the two halves of the string equality,
so that we can do the cheap (length) half early and the expensive
(contents) half late. We now generate:
func eqT(p, q *T) bool {
return len(p.s) == len(q.s) &&
p.i == q.i &&
runtime.memequal(p.s.ptr, q.s.ptr, len(p.s))
}
The generated code for these functions tends to be a bit shorter. Examples:
runtime
.eq."".Frame 274 -> 272 (-0.73%)
.eq."".funcinl 249 -> 247 (-0.80%)
.eq."".modulehash 207 -> 205 (-0.97%)
Change-Id: I4efac9f7d410f0a11a94dcee2bf9c0b49b60e301
Reviewed-on: https://go-review.googlesource.com/c/go/+/230205
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We only generate if statements via CondBreak, which is nice as the
control flow is simple and easy to work with. It seems like the If type
was added but never used, so remove it to avoid confusion.
We had a TODO about replacing CondBreak with If instead. I gave that a
try, but it doesn't seem worth the effort. The code gets more complex
and we don't really win anything in return.
While at it, don't use op strings as format strings in exprf. This
doesn't cause any issue at the moment, but it's best to be explicit
about the operator not containing any formatting verbs.
Change-Id: Ib59ad72d3628bf91594efc609e222232ad1e8748
Reviewed-on: https://go-review.googlesource.com/c/go/+/230257
Reviewed-by: Keith Randall <khr@golang.org>
The ReadOnly attribute was used to do copy on write when applying
relocations to symbols with read-only backing stores. Now that we
always apply relocations in the output buffer (mmap or heap), it
is always writeable. No need to tamper with the ReadOnly
attribute anymore.
Wasm is an exception, where we don't copy symbol contents to the
output buffer first. Do copy-on-write there.
This is in preparation of converting reloc to using the loader.
Change-Id: I15e53b7c162b9124e6689dfd8eb45cbe2ffd7153
Reviewed-on: https://go-review.googlesource.com/c/go/+/229991
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Currently, we run Asmb before reloc, except on Wasm, where the
order is reversed. However, Asmb is no-op on Wasm. So we can
always run Asmb first.
Change-Id: Ifb8989d8150ebdd5777deb05cbccec16f8e36d82
Reviewed-on: https://go-review.googlesource.com/c/go/+/229990
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The symbol alignment is set based on its size. In dynreloc2
symbol size may change (e.g. elfdynhash2). So the alignment must
be set after dynreloc2.
Noticed this while debugging nondeterministic build on Solaris.
Idx Name Size VMA LMA File off Algn
8 .hash 000000c8 000000000048add2 000000000048add2 0008add2 2**3
CONTENTS, ALLOC, LOAD, READONLY, DATA
This doesn't look right, as the section address is not a multiple
of its alignment.
Change-Id: I23534cbc59695b7bc241838173fcc71dde95b195
Reviewed-on: https://go-review.googlesource.com/c/go/+/230278
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Apply strong aux typing to lowering rules that do not require
modification beyond substituting -> for =>. Other lowering rules
and all the optimization rules will follow. I'm breaking it up
to allow toolstash-check to pass on the big CLs.
Passes toolstash-check -all.
Change-Id: I6f1340058a8eb5a1390411e59fcbea9d7f777e58
Reviewed-on: https://go-review.googlesource.com/c/go/+/229400
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The commuteDepth variable is no longer necessary; remove it.
Else branches after a log.Fatal call are unnecessary.
Also make the unbalanced return an integer, so we can differentiate
positive from negative cases. We only want to continue a rule with the
following lines if this balance is positive, for example.
While at it, make the balance loop stop when it goes negative, to not
let ")(" seem balanced.
Change-Id: I8aa313343ca5a2f07f638b62a0398fdf108fc9eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/228822
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Ensures that a canceled client request for Switching Protocols
(e.g. h2c, Websockets) will cause the underlying connection to
be terminated.
Adds a goroutine in handleUpgradeResponse in order to select on
the incoming client request's context and appropriately cancel it.
Fixes#35559
Change-Id: I1238e18fd4cce457f034f78d9cdce0e7f93b8bf6
GitHub-Last-Rev: 3629c78493
GitHub-Pull-Request: golang/go#38021
Reviewed-on: https://go-review.googlesource.com/c/go/+/224897
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
If an I/O operation fails because a deadline was exceeded,
return os.ErrDeadlineExceeded. We used to return poll.ErrTimeout,
an internal error, and told users to check the Timeout method.
However, there are other errors with a Timeout method that returns true,
notably syscall.ETIMEDOUT which is returned for a keep-alive timeout.
Checking errors.Is(err, os.ErrDeadlineExceeded) should permit code
to reliably tell why it failed.
This change does not affect the handling of net.Dialer.Deadline,
nor does it change the handling of net.DialContext when the context
deadline is exceeded. Those cases continue to return an error
reported as "i/o timeout" for which Timeout is true, but that error
is not os.ErrDeadlineExceeded.
Fixes#31449
Change-Id: I0323f42e944324c6f2578f00c3ac90c24fe81177
Reviewed-on: https://go-review.googlesource.com/c/go/+/228645
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
This triggers in 131 functions in std+cmd.
In those functions, it often helps considerably
(2-10% text size reduction).
Noticed while working on #38554.
Change-Id: Id0dbb8e7cb21d469ec08ec3d5be9beb9e8291e9c
Reviewed-on: https://go-review.googlesource.com/c/go/+/229707
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We set up static symbols during walk that
we later make copies of to initialize local variables.
It is difficult to ascertain at that time exactly
when copying a symbol is profitable vs locally
initializing an autotmp.
During SSA, we are much better placed to optimize.
This change recognizes when we are copying from a
global readonly all-zero symbol and replaces it with
direct zeroing.
This often allows the all-zero symbol to be
deadcode eliminated at link time.
This is not ideal--it makes for large object files,
and longer link times--but it is the cleanest fix I could find.
This makes the final binary for the program in #38554
shrink from >500mb to ~2.2mb.
It also shrinks the standard binaries:
file before after Δ %
addr2line 4412496 4404304 -8192 -0.186%
buildid 2893816 2889720 -4096 -0.142%
cgo 4841048 4832856 -8192 -0.169%
compile 19926480 19922432 -4048 -0.020%
cover 5281816 5277720 -4096 -0.078%
link 6734648 6730552 -4096 -0.061%
nm 4366240 4358048 -8192 -0.188%
objdump 4755968 4747776 -8192 -0.172%
pprof 14653060 14612100 -40960 -0.280%
trace 11805940 11777268 -28672 -0.243%
vet 7185560 7181416 -4144 -0.058%
total 113588440 113465560 -122880 -0.108%
And not just by removing unnecessary symbols;
the program text shrinks a bit as well.
Fixes#38554
Change-Id: I8381ae6084ae145a5e0cd9410c451e52c0dc51c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/229704
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Package amd64 is a more natural home for it.
It also makes it easier to see how many bytes
are being copied in ssa.html.
Passes toolstash-check.
Change-Id: I5ecf0f0f18e8db2faa2caf7a05028c310952bd94
Reviewed-on: https://go-review.googlesource.com/c/go/+/229703
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
net/http/pprof: delta profile support
runtime/pprof: profile labels plumbing for goroutine profiles
Change-Id: I92e750dc894c8c6b3c3ba10f7be58bb541d3c289
Reviewed-on: https://go-review.googlesource.com/c/go/+/230023
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These comparisons are fairly arbitrary,
but they should be more stable in the face
of other compiler changes than value ID.
This reduces the number of value ID
comparisons in schedule while running
make.bash from 542,442 to 99,703.
There are lots of changes to generated code
from this change, but they appear to
be overall neutral.
It is possible to further reduce the
number of comparisons in schedule;
I have changes locally that reduce the
number to about 25,000 during make.bash.
However, the changes are increasingly
complex and arcane, and reduce in much less
code churn. Given that the goal is stability,
that suggests that this is a reasonable
place to stop, at least for now.
Change-Id: Ie3a75f84fd3f3fdb102fcd0b29299950ea66b827
Reviewed-on: https://go-review.googlesource.com/c/go/+/229799
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Falling back to comparing Value.ID during scheduling
is undesirable: Not only are we simply hoping for a good
outcome, but the decision we make will be easily perturbed
by other compiler changes, leading to random fluctuations.
This change adds another decision point to the scheduler
by scheduling Values with many uses earlier.
Values with fewer uses are less likely to be spilled for
other reasons, so we should issue them as late as possible
in the hope of avoiding a spill.
This reduces the number of Value ID comparisons
in schedule while running make.bash
from 1,000,844 to 542,442.
As you would expect, this changes a lot of functions,
but the overall trend is positive:
file before after Δ %
api 5237184 5233088 -4096 -0.078%
compile 19926480 19918288 -8192 -0.041%
cover 5281816 5277720 -4096 -0.078%
dist 3711608 3707512 -4096 -0.110%
total 113588440 113567960 -20480 -0.018%
Change-Id: Ic99ebc4c614d4ae3807ce44473ec6b04684388ec
Reviewed-on: https://go-review.googlesource.com/c/go/+/229798
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The compiler produces high quality error messages when an interface is
implemented by *T, rather than T. This change improves the analogous
error messages in go/types, from "missing method X" to "missing method
X (X has pointer receiver)".
I am open to improving this message further - I didn't copy the compiler
error message exactly because, at one of the call sites of
(*check).missingMethod, we no longer have access to the name of the
interface.
Fixesgolang/go#36336
Change-Id: Ic4fc38b13fff9e5d9a69cc750c21e0b0c34d85a8
Reviewed-on: https://go-review.googlesource.com/c/go/+/229801
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Previous CL introduced index fingerprint in the object files.
This CL implements the second part: checking fingerprint
consistency in the linker when packages are loaded.
Change-Id: I05dd4c4045a65adfd95e77b625d6c75a7a70e4f1
Reviewed-on: https://go-review.googlesource.com/c/go/+/229618
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The new object files use indices for symbol references, instead
of names. Fundamental to the design, it requires that the
importing and imported packages have consistent view of symbol
indices. The Go command should already ensure this, when using
"go build". But in case it goes wrong, it could lead to obscure
errors like run-time crashes. It would be better to check the
index consistency at build time.
To do that, we add a fingerprint to each object file, which is
a hash of symbol indices. In the object file it records the
fingerprints of all imported packages, as well as its own
fingerprint. At link time, the linker checks that a package's
fingerprint matches the fingerprint recorded in the importing
packages, and issue an error if they don't match.
This CL does the first part: introducing the fingerprint in the
object file, and propagating fingerprints through
importing/exporting by the compiler. It is not yet used by the
linker. Next CL will do.
Change-Id: I0aa372da652e4afb11f2867cb71689a3e3f9966e
Reviewed-on: https://go-review.googlesource.com/c/go/+/229617
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
In the code there are conditions like !ctxt.IsDarwin(). This will
accidentally be true if HeadType is not yet set. Panic when
HeadType is not set, to catch errors.
Change-Id: Ic891123f27f0276fff5a4b5d29e5b1f7ebbb94ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/229869
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
So we can use it to set per-OS flags.
Also set flagnewDoData after archinit, where IsELF is set.
This should correct the logic of setting flagnewDoData.
Change-Id: I18c7252f141aa35119005c252becc9d7cb74f2f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/229867
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Keep track of all expressions encountered while
generating a rewrite result, and re-use them whenever possible.
Named expressions may still be used for clarity when desired.
Change-Id: I640dca108763eb8baeff8f9a4169300af3445b82
Reviewed-on: https://go-review.googlesource.com/c/go/+/229800
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
In the dev.link branch we continued developing the new object
file format support and the linker improvements described in
https://golang.org/s/better-linker . Since the last merge, more
progress has been made to improve the new linker.
This is a clean merge.
Change-Id: I57c510b651a39354d78478a9a4499f770eef2eb1
This patch begins the work of converting the linker's dodata phase to
work with loader APIs. Passes all.bash on linux/amd64, but hasn't been
tested on anything else (more arch-specific code needs to be written).
Use of the new dodata() phase is currently gated by a temporary
command line flag ("-newdodata"), and there is code in the linker's
main routine to insure that we only use the new version for the right
GOOS/GOARCH (currently restricted to ELF + AMD64).
Change-Id: Ied3966677d2a450bc3e0990e0f519b3fceaab806
Reviewed-on: https://go-review.googlesource.com/c/go/+/229706
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Move the guts of ctxt.Errorf into loader.Loader, so that we can make
calls to it from functions that have a "*loader.Loader" available but
not a "ctxt *Link". This is needed to start converting hooks like
"adddynrel" in the arch-specific portions of the linker to use loader
APIs.
Change-Id: Ieedd4583b66504be0e77d7f3fbadafe0d2307a69
Reviewed-on: https://go-review.googlesource.com/c/go/+/229497
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Clients may need to invoke the loader.Reloc2.SetType method to reset
the type of a relocation from external flavor to internal flavor,
meaning that the external type add-in needs to be zeroed (this is
needed when adding dynsym entries).
Add a new SymbolBuider method to support mutating the type of a reloc
for an external symbol, so that the external type can be changed as
well (Reloc2 doesn't have access to that). Also add similar methods
for updating target symbol and addend, so as to have a consistent
interface for ext reloc mutation.
Change-Id: I8e26cdae0a0f353019acba5f9c8a0506e3970266
Reviewed-on: https://go-review.googlesource.com/c/go/+/229604
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Allow for the possibility that a client could call newExtSym(), then
ask for the section of the new sym before SetSectSym is called on it
(check in SymSect for this case).
Change-Id: I7bd78e7b3b7618943705b616f62ea78c4a1b68d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/229603
Reviewed-by: Jeremy Faller <jeremy@golang.org>
On darwin/arm64, the copy of the system roots takes 256 KiB of disk
and 560 KiB of memory after parsing them (which is retained forever in
a package global by x509/root.go). In constrained environments like
iOS NetworkExtensions where total disk+RAM is capped at 15 MiB, these
certs take 5.3% of the total allowed memory.
It turns out you can get down from 816 KiB to 110 KiB by instead
storing compressed x509 certs in the binary and lazily inflating just
the needed certs at runtime as a function of the certs presented to
you by the server, then building a custom root CertPool in the
crypto/tls.Config.VerifyPeerCertificate hook.
This then saves 706 KiB.
Arguably that should be the default Go behavior, but involves
cooperation between x509 and tls, and adds a dependency to
compress/gzip. Also, it may not be the right trade-off for everybody,
as it involves burning more CPU on new TLS connections. Most iOS apps
don't run in a NetworkExtension context limiting them to 15 MiB.
The build tag is chosen to match the existing "nethttpomithttp2".
Change-Id: I7b1c845de08b22674f81dd546e7fadc7dda68bd7
Reviewed-on: https://go-review.googlesource.com/c/go/+/229762
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Fix regression where line numbers in the sources column of generated
ssa.html output became misaligned with the source code. This was due
to some new margins applied to certain h2 elements during the work
to combine identical columns.
Fixes#38612
Change-Id: I067ccbfa30d5de5be29aab9863bc1e21f6ded128
Reviewed-on: https://go-review.googlesource.com/c/go/+/229766
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This allows more exciting changes to compiler-generated assembly
language that might not be correct for tricky hand-crafted
assembly (e.g., nop padding breaking tables of call or branch
instructions).
Updates #35881
Change-Id: I842b811796076c160180a364564f2844604df3fb
Reviewed-on: https://go-review.googlesource.com/c/go/+/229708
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL uses fixVariadicCall before escape analyzing function calls.
This has a number of benefits, though also some minor obstacles:
Most notably, it allows us to remove ODDDARG along with the logic
involved in setting it up, manipulating EscHoles, and later copying
its escape analysis flags to the actual slice argument. Instead, we
uniformly handle all variadic calls the same way. (E.g., issue31573.go
is updated because now f() and f(nil...) are handled identically.)
It also allows us to simplify handling of builtins and generic
function calls. Previously handling of calls was hairy enough to
require multiple dispatches on n.Op, whereas now the logic is uniform
enough that we can easily handle it with a single dispatch.
The downside is handling //go:uintptrescapes is now somewhat clumsy.
(It used to be clumsy, but it still is, too.) The proper fix here is
probably to stop using escape analysis tags for //go:uintptrescapes
and unsafe-uintptr, and have an earlier pass responsible for them.
Finally, note that while we now call fixVariadicCall in Escape, we
still have to call it in Order, because we don't (yet) run Escape on
all compiler-generated functions. In particular, the generated "init"
function for initializing package-level variables can contain calls to
variadic functions and isn't escape analyzed.
Passes toolstash-check -race.
Change-Id: I4cdb92a393ac487910aeee58a5cb8c1500eef881
Reviewed-on: https://go-review.googlesource.com/c/go/+/229759
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This CL adds a UsesCgo config setting to go/types to specify that the
_cgo_gotypes.go file generated by cmd/cgo has been provided as a
source file. The type checker then internally resolves C.bar qualified
identifiers to _Cfoo_bar as appropriate.
It also adds support to srcimporter to automatically run cgo.
Unfortunately, this functionality is not compatible with overriding
OpenFile, because cmd/cgo and gcc will directly open files.
Updates #16623.
Updates #35721.
Change-Id: I1e1965fe41b765b7a9da3431f2a86cc16025dee2
Reviewed-on: https://go-review.googlesource.com/c/go/+/33677
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fix a longstanding TODO.
Provides widespread, minor improvements.
Negligible compiler cost.
Because the freeze nears, put in a safety flag to easily disable.
Change-Id: I338812181ab6d806fecf22afd3c3502e2c94f7a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/229600
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Provides minor widespread benefit to generated code.
Removes one source of random fluctuation when changing
other aspects of the compiler.
Change-Id: I16db6f5e240a97d27f05dc1ba5b8b729af3adb12
Reviewed-on: https://go-review.googlesource.com/c/go/+/229702
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds some instructions that were missing from the
ppc64 assembler, mostly power9 but a few others from earlier.
Tests in cmd/asm for ppc64 were updated: ppc64.s includes the
new instructions, and ppc64enc.s now includes not only the
new instructions but most ppc64 opcodes to provide a more
complete test of the ppc64 assembler.
The ppc64 instruction set is used for linux/ppc64le,
linux/ppc64, and aix/ppc64.
Change-Id: I8695f89dbca06174847963f4ef869f2e584d5bbf
Reviewed-on: https://go-review.googlesource.com/c/go/+/229479
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Converted some Println() statements (used to make sure that certain variables were
kept alive and not optimized out) to assignments into global variables, so the
tests don't produce extraneous output when there is a failure.
Fixes#38594
Change-Id: I7eb41bb02b2b1e78afd7849676b5c85bc11c759c
Reviewed-on: https://go-review.googlesource.com/c/go/+/229538
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL moves fixVariadicCall from mid-Walk of function calls to
early-Order, in preparation for moving it even earlier in the future.
Notably, rewriting variadic calls this early introduces two
compilation output changes:
1. Previously, Order visited the ODDDARG before the rest of the
arguments list, whereas the natural time to visit it is at the end of
the list (as we visit arguments left-to-right, and the ... argument is
the rightmost one). Changing this ordering permutes the autotmp
allocation order, which in turn permutes autotmp naming and stack
offsets.
2. Previously, Walk separately walked all of the variadic arguments
before walking the entire slice literal, whereas the more natural
thing to do is just walk the entire slice literal. This triggers
slightly different code paths for composite literal construction in
some cases.
Neither of these have semantic impact. They simply mean we're now
compiling f(a,b,c) the same way as we were already compiling
f([]T{a,b,c}...).
Change-Id: I40ccc5725697a116370111ebe746b2639562fe87
Reviewed-on: https://go-review.googlesource.com/c/go/+/229601
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Allow go generate to process packages that contain invalid code. Ignore
errors when loading the package, but process only files which have a
valid package clause. Set $GOPACKAGE individually for each file, based
on the package clause.
Add test script for go generate and invalid packages.
Fixes#36422
Change-Id: I91ea088346a1548ccd6678b4595a527b948331ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/229097
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In mid-Walk, we rewrite calls to variadic functions to use explicit
slice literals; e.g., rewriting f(a,b,c) into f([]T{a,b,c}...).
However, it would be useful to do that rewrite much earlier in the
compiler, so that other compiler passes can be simplified.
This CL refactors the rewrite logic into a new fixVariadicCall
function, which subsequent CLs can more easily move into earlier
compiler passes.
Passes toolstash-check -race.
Change-Id: I408e655f2d3aa00446a2e6accf8765abc3b16a8a
Reviewed-on: https://go-review.googlesource.com/c/go/+/229486
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
ioutil.TempDir doesn't like path separators in its pattern. Modify
(*common).TempDir to replace path separators with underscores before
using the test name as a pattern for ioutil.TempDir.
Fixes#38465.
Change-Id: I9e8ae48b99648b2bf9f561762e845165aff01972
Reviewed-on: https://go-review.googlesource.com/c/go/+/229399
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
unsafe.Pointer safety rule #4 says "The compiler handles a Pointer
converted to a uintptr in the argument list of a call". Within escape
analysis, we've always required this be a single conversion
unsafe.Pointer->uintptr conversion, but the corresponding logic in
order is somewhat laxer, allowing arbitrary chains of OCONVNOPs from
unsafe.Pointer to uintptr.
This CL changes order to be stricter to match escape analysis.
Passes toolstash-check.
Change-Id: Iadd210d2123accb2020f5728ea2a47814f703352
Reviewed-on: https://go-review.googlesource.com/c/go/+/229578
Reviewed-by: Ian Lance Taylor <iant@golang.org>
With CL 228782, we've removed file I/O, but we're growing the memory too
much. This change will periodically flush the heap area to the mmapped
area (if possible).
Change-Id: I1622c738ee5a1a6d02bff5abb0a5751caf8095c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/229439
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
golang.org/cl/147598 added the support for delta computation for mutex
and block profiles. In fact, this delta computation makes sense for
other types of profiles.
For example, /debug/pprof/allocs?seconds=x will provide how much allocation
was made during the specified period. /debug/pprof/goroutine?seconds=x will
provide the changes in the list of goroutines. This also makes sense for
custom profiles.
Update #23401
Update google/pprof#526
Change-Id: I45e9073eb001ea5b3f3d16e5a57f635193610656
Reviewed-on: https://go-review.googlesource.com/c/go/+/229537
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
In some slow environment, the goroutine for mutexHog2 may not run
within 1secs. So, try with increasing seconds parameters,
and declare failure if it still fails with the longest duration
parameter (32sec).
Also, relax the test condition - previously we expected the
profile's duration is within 0.5~2sec. But obviously, in some
slow environment, that's not even guaranteed. Just check we get
non-zero duration in the result.
Update #38544
Change-Id: Ia9b0d51429a2093e6c9eb92cf463ff6952ef3e10
Reviewed-on: https://go-review.googlesource.com/c/go/+/229498
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL optimizes code that uses a carry from a function such as
bits.Add64 as the condition in an if statement. For example:
x, c := bits.Add64(a, b, 0)
if c != 0 {
panic("overflow")
}
Rather than converting the carry into a 0 or a 1 value and using
that as an input to a comparison instruction the carry flag is now
used as the input to a conditional branch directly. This typically
removes an ADD LOGICAL WITH CARRY instruction when user code is
doing overflow detection and is closer to the code that a user
would expect to generate.
Change-Id: I950431270955ab72f1b5c6db873b6abe769be0da
Reviewed-on: https://go-review.googlesource.com/c/go/+/219757
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The code that runs as a part of loadlibfull converts the linker's
outer/sub state and sets the sym.Symbol AttrSubSymbol if a symbol has
both A) an outer sym, and B) is listed as a sub-symbol by some other
symbol.
Make sure that we have the same logic in the original loader method,
since we need to use it as part of dodata() prior to loadlibfull.
Change-Id: I200adab741d778a6ba821419e8ea131ad19375bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/229440
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Change the timing for preprocessing of integer/floating point constant
symbols so that we populate them with content at an earlier stage.
This is needed to allow them can be picked up by the loader-API
version of dodata().
Change-Id: Icf09f4f4b318b4f77e11d4a0f0a9cbecd76a1d6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/229438
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
This covers most of the lowering rules.
Passes
GOARCH=mips gotip build -toolexec 'toolstash -cmp' -a std
GOARCH=mipsle gotip build -toolexec 'toolstash -cmp' -a std
Change-Id: I9d00aaebecb36622e3bdaf556e5a9377670bf86b
Reviewed-on: https://go-review.googlesource.com/c/go/+/229102
Reviewed-by: Keith Randall <khr@golang.org>
Create a new version of the GCProg type + methods that use loader APIs
instead of sym.Symbol.
This code isn't actually used just yet, but will be needed once the
wavefront reaches dodata() and we need to convert that phase.
Change-Id: I087521832015818204fe5c2ac99c7bd3f61b2bf0
Reviewed-on: https://go-review.googlesource.com/c/go/+/229037
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Previously the connection pool would only count connections
expired in the background connectionCleaner goroutine towards the
MaxLifetimeClosed stat.
This change increments the stat correctly when checking for
expiry in when acquiring and releasing a connection.
Fixes#38058
Change-Id: Id707ddd40a42a4c38658d5f2931da131647d6c29
GitHub-Last-Rev: 0f205ede43
GitHub-Pull-Request: golang/go#38263
Reviewed-on: https://go-review.googlesource.com/c/go/+/227278
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Theophanes <kardianos@gmail.com>
Goroutines are directly associated with labels. It's relatively easy to
plumb those through without creating goroutine-locals in the wild.
This is accomplished by splitting out most of the code from the public
`runtime.GoroutineProfile` into a new unexported
`runtime.goroutineProfileWithLabels`, which then has a thin wrapper
linked into the `runtime/pprof` package as
`runtime_goroutineProfileWithLabels`. (mirroring the way labels get
associated with the `g` for a goroutine in the first place)
Per-#6104, OS-thread creation profiles are a bit useless, as `M`s tend
to be created be created by a background goroutine. As such, I decided
not to add support for capturing the labels at `M`-creation-time, since
the stack-traces seem to always come out `nil` for my simple test
binaries.
This change currently provides labels for debug=0 and debug=1, as
debug=2 is currently entirely generated by the runtime package and I
don't see a clean way of getting the `labelMap` type handled properly
within the `runtime` package.
Update the comment added in cl/131275 to mention goroutine support for
labels.
Updates #23458
Change-Id: Ia4b558893d7d10156b77121cd9b70c4ccd9e1889
Reviewed-on: https://go-review.googlesource.com/c/go/+/189318
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
With old object files, when objdump an object file which, for
example, contains a call of fmt.Fprintf, it shows a symbol
reference like
R_CALL:fmt.Fprintf
With new object files, as the symbol reference is indexed, the
reference becomes
R_CALL:fmt.#33
The object file does not contain information of what symbol #33
in the fmt package is.
To make this more useful, print the index when dumping the symbol
definitions. This way, when dumping the fmt package, e.g.
"go tool nm fmt.a", it will print
6c705 T fmt.Fprintf#33
So we can find out what symbol #33 actually is.
Change-Id: I320776597d28615ce18dd0617c352d2b8180db49
Reviewed-on: https://go-review.googlesource.com/c/go/+/229246
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Currently, we use a dense array to store symbol's sections. The
array element is a *sym.Section, which takes 8 bytes per symbol
on a 64-bit machine. And the array is created upfront.
To reduce memory usage, use a 16-bit index for sections, so we
store 2 bytes per symbol. The array is pointerless, reducing GC
work. Also create the array lazily.
This reduces some memory usage: linking cmd/compile,
name old alloc/op new alloc/op delta
Loadlib_GC 42.1MB ± 0% 36.2MB ± 0% -14.01% (p=0.008 n=5+5)
name old live-B new live-B delta
Loadlib_GC 16.8M ± 0% 15.4M ± 0% -8.36% (p=0.008 n=5+5)
Archive_GC 98.2M ± 0% 97.2M ± 0% -1.02% (p=0.008 n=5+5) # at the end
Change-Id: If8c41eded8859660bca648c5e6fdf5830810fbf6
Reviewed-on: https://go-review.googlesource.com/c/go/+/229306
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Originally on s390x, ADDE does not work when adding numbers from a memory location.
For example: ADDE (R3), R4 will result in a failure.
Since ADDC, ADD and ADDW already supports adding from memory location,
let's support that for ADDE as well.
Change-Id: I7cbe112ea154733a621b948c6a21bbee63fb0c62
Reviewed-on: https://go-review.googlesource.com/c/go/+/229304
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Clean up the code a little bit to make it clearer:
Don't check throwsplit for a SI_USER signal.
If throwsplit is set for a SigPanic signal, always throw;
discard any other flags.
Fixes#36420
Change-Id: Ic9dcd1108603d241f71c040504dfdc6e528f9767
Reviewed-on: https://go-review.googlesource.com/c/go/+/228900
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Currently markrootSpans, the scanning routine which scans span specials
(particularly finalizers) as roots, uses sweepSpans to shard work and
find spans to mark.
However, as part of a future CL to change span ownership and how
mcentral works, we want to avoid having markrootSpans use the sweep bufs
to find specials, so in this change we introduce a new mechanism.
Much like for the page reclaimer, we set up a per-page bitmap where the
first page for a span is marked if the span contains any specials, and
unmarked if it has no specials. This bitmap is updated by addspecial,
removespecial, and during sweeping.
markrootSpans then shards this bitmap into mark work and markers iterate
over the bitmap looking for spans with specials to mark. Unlike the page
reclaimer, we don't need to use the pageInUse bits because having a
special implies that a span is in-use.
While in terms of computational complexity this design is technically
worse, because it needs to iterate over the mapped heap, in practice
this iteration is very fast (we can skip over large swathes of the heap
very quickly) and we only look at spans that have any specials at all,
rather than having to touch each span.
This new implementation of markrootSpans is behind a feature flag called
go115NewMarkrootSpans.
Updates #37487.
Change-Id: I8ea07b6c11059f6d412fe419e0ab512d989377b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/221178
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Previously for a method value "x.M", we always flowed x directly to
the heap, which led to the receiver argument generally needing to be
heap allocated.
This CL changes it to flow x to the closure and M's receiver
parameter. This allows receiver arguments to be stack allocated as
long as (1) the closure never escapes, *and* (2) method doesn't leak
its receiver parameter.
Within the standard library, this allows a handful of objects to be
stack allocated instead. Listed here are diagnostics that were
previously emitted by "go build -gcflags=-m std cmd" that are no
longer emitted:
archive/tar/writer.go:118:6: moved to heap: f
archive/tar/writer.go:208:6: moved to heap: f
archive/tar/writer.go:248:6: moved to heap: f
cmd/compile/internal/gc/initorder.go:252:2: moved to heap: d
cmd/compile/internal/gc/initorder.go:75:2: moved to heap: s
cmd/go/internal/generate/generate.go:206:7: &Generator literal escapes to heap
cmd/internal/obj/arm64/asm7.go:910:2: moved to heap: c
cmd/internal/obj/mips/asm0.go:415:2: moved to heap: c
cmd/internal/obj/pcln.go:294:22: new(pcinlineState) escapes to heap
cmd/internal/obj/s390x/asmz.go:459:2: moved to heap: c
crypto/tls/handshake_server.go:56:2: moved to heap: hs
Thanks to Cuong Manh Le for help coming up with this solution.
Fixes#27557.
Change-Id: I8c85d671d07fb9b53e11d2dd05949a34dbbd7e17
Reviewed-on: https://go-review.googlesource.com/c/go/+/228263
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL refactors tagHole to handle all three call situations (unknown
function; known function in same analysis batch; known function in
previous analysis batch). This will make it somewhat easier to reuse
in a followup CL.
Passes toolstash-check.
Change-Id: I764d047a333dfc593d721a881361683e94b485df
Reviewed-on: https://go-review.googlesource.com/c/go/+/229059
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
During schedinit, these may occur in:
mProf_Malloc
stkbucket
newBucket
persistentalloc
persistentalloc1
mProf_Malloc
setprofilebucket
fixalloc.alloc
persistentalloc
persistentalloc1
These seem to be legitimate lock orderings.
Additionally, mheap.speciallock had a defined rank, but it was never
actually used. That is fixed now.
Updates #38474
Change-Id: I0f6e981852eac66dafb72159f426476509620a65
Reviewed-on: https://go-review.googlesource.com/c/go/+/228786
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
When generating code for unsigned equals (==) and not equals (!=)
comparisons we currently, on s390x, always use signed comparisons.
This mostly works well, however signed comparisons on s390x sign
extend their immediates and unsigned comparisons zero extend them.
For compare-and-branch instructions which can only have 8-bit
immediates this significantly changes the range of immediate values
we can represent: [-128, 127] for signed comparisons and [0, 255]
for unsigned comparisons.
When generating equals and not equals checks we don't neet to worry
about whether the comparison is signed or unsigned. This CL
therefore adds rules to allow us to switch signedness for such
comparisons if it means that it brings a constant into range for an
8-bit immediate.
For example, a signed equals with an integer in the range [128, 255]
will now be implemented using an unsigned compare-and-branch
instruction rather than separate compare and branch instructions.
As part of this change I've also added support for adding a name
to block control values using the same `x:(...)` syntax we use for
value rules.
Triggers 792 times when compiling cmd and std.
Change-Id: I77fa80a128f0a8ce51a2888d1e384bd5e9b61a77
Reviewed-on: https://go-review.googlesource.com/c/go/+/228642
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Use nlzX variants instead. While at it, also remove tests involve
nlz/nlo/nto/log2, since when we are calling directly "math/bits"
functions.
Passes toolstash-check.
Change-Id: I83899741a29e05bc2c19d73652961ac795001781
Reviewed-on: https://go-review.googlesource.com/c/go/+/229138
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
go/build.Import can return errors for many different reasons like
inconsistent package clauses or errors parsing build constraints.
It will still return a *build.Package with imports from files it was
able to process. Package.load should load these imports, even after an
unknown error.
There is already a special case for scanner.ErrorList (parse
error). This CL expands that behavior for all errors.
Fixes#38568
Change-Id: I871827299c556f1a9a5b12e7755b221e9d8c6e0e
Reviewed-on: https://go-review.googlesource.com/c/go/+/229243
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Thie CL changes cmd/compile/internal/syntax to give the gc half of
the compiler more control over pragma handling, so that it can prepare
better errors, diagnose misuse, and so on. Before, the API between
the two was hard-coded as a uint16. Now it is an interface{}.
This should set us up better for future directives.
In addition to the split, this CL emits a "misplaced compiler directive"
error for any directive that is in a place where it has no effect.
I've certainly been confused in the past by adding comments
that were doing nothing and not realizing it. This should help
avoid that kind of confusion.
The rule, now applied consistently, is that a //go: directive
must appear on a line by itself immediately before the declaration
specifier it means to apply to. See cmd/compile/doc.go for
precise text and test/directive.go for examples.
This may cause some code to stop compiling, but that code
was broken. For example, this code formerly applied the
//go:noinline to f (not c) but now will fail to compile:
//go:noinline
const c = 1
func f() {}
Change-Id: Ieba9b8d90a27cfab25de79d2790a895cefe5296f
Reviewed-on: https://go-review.googlesource.com/c/go/+/228578
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Split out DWARF symbol-to-section assignment into its own separate
helper routine, to improve readability. No change in functionality.
Change-Id: Ic2e4f4d99afbff65161cbb8bd63e866ea555f322
Reviewed-on: https://go-review.googlesource.com/c/go/+/228957
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Additional cleanups and refactorings in the allocateSections portion
of dodata. Introduce some new helper routines to be used for common
cases in creating sections and assigning symbols, with a goal of
reducing duplicated code blocks and having more readable code.
No change in functionality.
Change-Id: I1b020b3ee993674329b2bebfd7c35995e3a2c043
Reviewed-on: https://go-review.googlesource.com/c/go/+/228883
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The trace tool had a broken link due to a parameter encoding error,
which has been corrected.
In addition:
- the user regions page has been enhanced to include links to
pprof style profiles for region specific io, block, syscall and
schedwait profiles.
- sortable table headers have a pointer cursor to indicate they're
clickable.
Fixes#38518
Change-Id: I26cd5157bd9753750f5f53ea03aac5d2d41b021c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228899
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This is more or less a direct translation, to get things going.
There are more things we can do to make it better, especially on
the handling of container symbols.
Change-Id: I11a0087e402be8d42b9d06869385ead531755272
Reviewed-on: https://go-review.googlesource.com/c/go/+/229125
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
On Plan 9, FileOpen with flag O_CREATE & ~O_TRUNC is done in two
steps. First, syscall.Open is attempted, to avoid truncation when opening
an existing file. If that fails because the file doesn't exist,
syscall.Create is used to create a new file. If the Create fails,
for example because we are racing with another process to create a
ModeExclusive file, the PathError returned from FileOpen should reflect
the result of the Create, not the "does not exist" error from the initial
Open attempt.
Fixes#38540
Change-Id: I90c95a301de417ecdf79cd52748591edb1dbf528
Reviewed-on: https://go-review.googlesource.com/c/go/+/229099
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
Convert first section of 386 optimization rules to the typed aux form.
Adds addOffset{32,64} functions that returns ValAndOffs and a
ValAndOff.canAdd32 function that takes an int32.
Passes
GOARCH=386 gotip build -toolexec 'toolstash -cmp' -a std
Change-Id: I69d2a8ace6936d5e8ba6ba047183002bf07dd5be
Reviewed-on: https://go-review.googlesource.com/c/go/+/228825
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is the second attempt. The first attempt was CL 229127,
which got rolled back by CL 229177, because it caused
an infinite loop during compilation on some platforms.
I didn't notice that the trybots hadn't completed when I submitted; mea culpa.
The bug was that we were checking x&(x-1)==0, which is also true of 0,
which does not have exactly one bit set.
This caused an infinite rewrite rule loop.
Updates #38547
file before after Δ %
compile 19678112 19669808 -8304 -0.042%
total 113143160 113134856 -8304 -0.007%
Change-Id: I417a4f806e1ba61277e31bab2e57dd3f1ac7e835
Reviewed-on: https://go-review.googlesource.com/c/go/+/229197
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Given:
type u struct{}
func (u) M() {}
type t struct { u; u2 u }
var v = reflect.ValueOf(t{})
Package reflect allows:
v.Method(0) // v.M
v.Field(0).Method(0) // v.u.M
but panics from:
v.Field(1).Method(0) // v.u2.M
because u2 is not an exported field. However, u is not an exported
field either, so this is inconsistent.
It seems like this behavior originates from #12367, where it was
decided to allow traversing unexported embedded fields to be able to
access their exported fields, since package reflect doesn't provide an
alternative way to access promoted fields directly.
But extending that logic to promoted *methods* was inappropriate,
because package reflect's normal method handling logic already handles
promoted methods correctly. This CL corrects that mistake.
Fixes#38521.
Change-Id: If65008965f35927b4e7927cddf8614695288eb19
Reviewed-on: https://go-review.googlesource.com/c/go/+/228902
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This was accidentally broken in CL 166462, which introduce another
function in the panicking path without adjusting the argument to
runtime.Caller.
Change-Id: Ib6f9ed8673fefd458c7a4e3a918c45c5b31ca552
Reviewed-on: https://go-review.googlesource.com/c/go/+/229082
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is followup of CL 228860, which rewrite shift rules to use typed
aux. That CL introduced nlz* functions, to refactor left shift rules.
While at it, we realize there's a bug in old rules with both right/left
shift rules, but only fix for left shift rules only.
This CL fixes the bug for right shift rules.
Passes toolstash-check.
Change-Id: Id8f2158b1b66c9e87f3fdeaa7ae3e35dc0666f8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/229137
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
This optimization works on any integer with exactly one bit set.
This is identical to being a power of two, except in the
most negative number. Use oneBit instead.
The rule now triggers in a few more places in std+cmd,
in packages encoding/asn1, crypto/elliptic, and
vendor/golang.org/x/crypto/cryptobyte.
This change obviates the need for CL 222479
by doing this optimization consistently in the compiler.
Change-Id: I983c6235290fdc634fda5e11b10f1f8ce041272f
Reviewed-on: https://go-review.googlesource.com/c/go/+/229124
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This reverts commit 98c32670fd454939794504225dca1d4ec55045d5.
Rolling-forward with trivial format-string fix
cmd/compile: adjust RISCV64 rewrite rules to use typed aux fields
Also add a typed version of mergeSym to rewrite.go to assist with a few
rules that used mergeSym in the untyped-form.
Remove a few extra int32 overflow checks that no longer make sense, as
adding two int8s or int16s should never overflow an int32.
Passes toolstash-check -all.
Original review: https://go-review.googlesource.com/c/go/+/228882
Change-Id: Ib63db4ee1687446f0f3d9f11575a40dd85cbce55
Reviewed-on: https://go-review.googlesource.com/c/go/+/229126
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Each invocation of 'go list' may consume a significant quantity of
system resources, including buffers for reading files and RAM for the
runtime's memory footprint.
Very small builders may even hit swap as a result of that load,
further exacerbating resource contention.
To avoid overloading small builders, restrict 'go list' calls to
runtime.GOMAXPROCS as it is set at the first call to loadImports.
This also somewhat improves running time even on larger machines: on
my workstation, this change reduces the wall time for 'go test
cmd/api' by around 100ms.
Updates #38537
Change-Id: I968e0f961a8f1d84c27e1ab8b621b9670dcfd448
Reviewed-on: https://go-review.googlesource.com/c/go/+/228998
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also add a typed version of mergeSym to rewrite.go to assist with a few
rules that used mergeSym in the untyped-form.
Remove a few extra int32 overflow checks that no longer make sense, as
adding two int8s or int16s should never overflow an int32.
Passes toolstash-check -all.
Change-Id: I72ddd2b0d9001faa87ad0ab54f500057164661b7
Reviewed-on: https://go-review.googlesource.com/c/go/+/228882
Reviewed-by: Keith Randall <khr@golang.org>
The rewrite loop in shortcircuit is identical to the one in fuse.
That's not surprising; shortcircuit is fuse-like.
Take advantage of that by merging the two loops.
Passes toolstash-check.
Change-Id: I642cb39a23d2ac8964ed577678f062fce721439c
Reviewed-on: https://go-review.googlesource.com/c/go/+/229003
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Create a couple of helper routines to aid in assigning symbols to
sections in dodata's allocateSections, then replace loops over symbol
lists with calls to the helpers, to reduce the amount of duplicate
code.
This patch also decouples gcprog/gcdata generation from
symbol-to-section assignment (previously intertwined), as an aid to
making the code less complicated.
No change in functionality.
Change-Id: If126579486bce458f697e32bad556df453df53e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/228781
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Change linker DWARF generation to move away from emitting a single
giant list of DWARF symbols, and instead emit a list of descriptors,
with each descriptor holding the symbols for a specific DWARF section.
While placing all DWARF symbols in a single lists does come in handy
in certain instances, it also creates a lot of confusion and weird
code in other cases, specifically where we want to perform operations
on a section-by-section basis (resulting in code that tries to
re-discover section boundaries by walking/inspecting the list).
Change-Id: I4dac81bd38cba903c9fd7004d613597e76dfb77a
Reviewed-on: https://go-review.googlesource.com/c/go/+/228780
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Move more items into the dodata state object (including the "datsize"
variable used in allocateSections) and the Link ctxt pointer), so as
to prepare for follow-on refactorings. No change in functionality.
Change-Id: Ie2b1651c1ac9b89deb3f7692227dcd931240afa9
Reviewed-on: https://go-review.googlesource.com/c/go/+/228779
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The fallocate calls will lower the chances of SIGBUS in the linker, but
it might still happen on other unsupported platforms and filesystems.
Darwin cmd/compile stats:
Munmap 16.0ms ± 8% 0.8ms ± 3% -95.19% (p=0.000 n=8+10)
TotalTime 484ms ± 2% 462ms ± 2% -4.52% (p=0.000 n=10+9)
Updates #37310
Change-Id: I41c6e490adec26fa1ebee49a5b268828f5ba05e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/228385
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When using plugins, on darwin we do weird things with
runtime.etext symbol, assigning a value for it, then clear it,
reassign a different value. This breaks the logic of writing text
address directly.
I think we should remove the weird thing with runtime.etext, if
possible. But for now, disable the optimization (this is not a
common case anyway).
Fix darwin-nocgo build.
Change-Id: Iab6a9f8519115226a5bbaaafe4a93f17042a928a
Reviewed-on: https://go-review.googlesource.com/c/go/+/229057
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
It was possible for a Tx that was aborted for rollback
asynchronously to execute a query after the rollback had completed
on the database, which often would auto commit the query outside
of the transaction.
By W-locking the tx.closemu prior to issuing the rollback
connection it ensures any Tx query either fails or finishes
on the Tx, and never after the Tx has rolled back.
Fixes#34775Fixes#32942
Change-Id: I017b7932082f2f4ead70bae08b61ed9068ac1d01
Reviewed-on: https://go-review.googlesource.com/c/go/+/216240
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
With the original connection reuse strategy, it was possible that
when a new connection was requested, the pool would wait for an
an existing connection to return for re-use in a full connection
pool, and then it would check if the returned connection was expired.
If the returned connection expired while awaiting re-use, it would
return an error to the location requestiong the new connection.
The existing call sites requesting a new connection was often the last
attempt at returning a connection for a query. This would then
result in a failed query.
This change ensures that we perform the expiry check right
before a connection is inserted back in to the connection pool
for while requesting a new connection. If requesting a new connection
it will no longer fail due to the connection expiring.
Fixes#32530
Change-Id: If16379befe0e14d90160219c0c9396243fe062f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/216197
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Node.NonNil and Node.Bounded were a bit muddled. This led to #38496.
This change clarifies and documents them.
It also corrects one misuse.
However, since ssa conversion doesn't make full use of the bounded hint,
this correction doesn't change any generated code.
The next change will fix that.
Passes toolstash-check.
Change-Id: I2bcd487a0a4aef5d7f6090e653974fce0dce3b8e
Reviewed-on: https://go-review.googlesource.com/c/go/+/228787
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The core CPU profiling loop contains a 100ms sleep.
This is important to reduce overhead.
However, it means that it takes 200ms to shutting down a program
with CPU profiling enabled. When trying to collect many samples
by running a short-lived program many times, this adds up.
This change cuts the shutdown penalty in half by skipping
the sleep whenever possible.
Change-Id: Ic3177f8e1a2d331fe1a1ecd7c8c06f50beb42535
Reviewed-on: https://go-review.googlesource.com/c/go/+/228886
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
All callers to gdata knew the kind of node they were working with,
so all calls to gdata have been replaced with more specific calls.
Some OADDR nodes were constructed solely for the purpose of
passing them to gdata for unwrapping. In those cases, we can now
cut to the chase.
Passes toolstash-check.
Change-Id: Iacc1abefd7f748cb269661a03768d3367319b0b0
Reviewed-on: https://go-review.googlesource.com/c/go/+/228888
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If we are internal linking a static executable, in pclntab
generation, the function addresses are known, so we can just use
them directly instead of emitting relocations.
For external linking or other build modes, we are generating a
relocatable binary so we still need to emit relocations.
Reduce some allocations: for linking cmd/compile,
name old alloc/op new alloc/op delta
Pclntab_GC 38.8MB ± 0% 36.4MB ± 0% -6.19% (p=0.008 n=5+5)
TODO: can we also do this in DWARF generation?
Change-Id: I43920d930ab1da97c205871027e01844a07a5e60
Reviewed-on: https://go-review.googlesource.com/c/go/+/228478
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Recreation of CL 228317.
The problem with that original CL was a late requested change,
reordering reloc and asmb, resulting in symbols having stale pointers to
their data. I've fixed this by preallocating the heap variable in OutBuf
for platforms w/o mmap.
Change-Id: Icdb392ac2c8d6518830f4c84cf422e78b8ab68c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/228782
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
CL 228859 refactored detecting reflect package logic in to isReflectPkg
function. The function has un-necessary nil check for p, so remove that
check.
Passes toolstash-check.
Change-Id: I2f3f1ac967fe8d176dda3f3b4698ded08602e2fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/228861
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Convert all the 386 lowering rules to the typed aux form.
Passes
GOARCH=386 gotip build -toolexec 'toolstash -cmp' -a std
Change-Id: I15256f20bc4442391755e6fffb8206dcaab94830
Reviewed-on: https://go-review.googlesource.com/c/go/+/228818
Reviewed-by: Keith Randall <khr@golang.org>
Currently we only check for reflect.Value.Method. And
reflect.Value.MethodByName is covered since it calls
reflect.Value.Method internally. But it is brittle to rely on
implementation detail of the reflect package. Check for
MethodByName explicitly.
Change-Id: Ifa8920e997524003dade03abc4fb3c4e64723643
Reviewed-on: https://go-review.googlesource.com/c/go/+/228881
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
reflect.Type.Method (and MethodByName) can be used to obtain a
reference of a method by reflection. The linker needs to know
if reflect.Type.Method is called, and retain all exported methods
accordingly. This is handled by the compiler, which marks the
caller of reflect.Type.Method with REFLECTMETHOD attribute. The
current code failed to handle the reflect package itself, so the
method wrapper reflect.Type.Method is not marked. This CL fixes
it.
Fixes#38515.
Change-Id: I12904d23eda664cf1794bc3676152f3218fb762b
Reviewed-on: https://go-review.googlesource.com/c/go/+/228880
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
reflect.Value.Call, if reachable, used to bring all exported
methods live. CL 228792 fixes this, removing the check of
reflect.Value.Call. This CL adds a test.
Updates #38505.
Change-Id: Ib4cab3c3c86c9c9702d041266e59b159d0ff0a97
Reviewed-on: https://go-review.googlesource.com/c/go/+/228878
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The types used while generating code, such as Rule and File, have been
exported for a while. This is harmless for a main package, and lets us
easily differentiate types from variables and functions, as well as use
names like "If" since "if" is a keyword.
However, the fields remained unexported. This was a bit inconsistent,
and also meant that we couldn't use some intuitive names like If.else.
Export them.
Besides the capitalization, the only change is that the If type now has
the fields Then and Else, instead of stmt and alt.
Change-Id: I426ff140c6ca186fec394f17b29165861da5fd98
Reviewed-on: https://go-review.googlesource.com/c/go/+/228821
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In the linker's deadcode pass, we need to keep a method live if
it can be reached through reflection. We do this by marking all
exported method live if reflect.Value.Method or
reflect.Type.Method is used. Currently we also check for
reflect.Value.Call, which is unnecessary because in order to call
a method through reflection, the method must be obtained through
reflect.Value.Method or reflect.Type.Method, which we already
check.
Per discussion in https://groups.google.com/d/msg/golang-dev/eG9It63-Bxg/_bnoVy-eAwAJ
Thanks Brad, Russ, and Ian for bringing this up.
Change-Id: I8e9529a224bb898dbf5752674cc9d155db386c14
Reviewed-on: https://go-review.googlesource.com/c/go/+/228792
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
p.literal's doc comment said it returned a value but it doesn't.
While we're here, p.newLiteral is only called from p.literal,
so simplify the code by merging the two.
Change-Id: Ia357937a99f4e7473f0f1ec837113a39eaeb83d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/222659
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Everybody was deferring a flush when main already
did that, so drop all that nonsense. (Flush was doing
the package clause stuff.) But then make sure we do
get a package clause when there is correctly no output,
as for an empty package. Do that by triggering a
package clause in allDoc and packageDoc.
Slightly tricky but way less intricate than before.
Fixes#37969.
Change-Id: Ia86828436e6c4ab46e6fdaf2c550047f37f353f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/226998
Reviewed-by: Russ Cox <rsc@golang.org>
I'm planning to modify this test in a follow-up CL, so we might
as well convert it to a script test. I don't think there's an easy
way to detect whether we have a case-insensitive file system, without
adding a new condition to the script framework, so the test is just
guessing that darwin and windows could have case-insensitive file systems.
Change-Id: I48bb36f86f19898618681515ac448c3bb4735857
Reviewed-on: https://go-review.googlesource.com/c/go/+/228783
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
At least as far as I can tell, this file never explicitly states whether
locks with higher or lower rank should be taken first. It is implied in
some comments, and clear from the code, of course.
Add an explicit comment to make things more clear and hopefully reduce
new locks being adding in the wrong spot.
Change-Id: I17c6fd5fc216954e5f3550cf91f17e25139f1587
Reviewed-on: https://go-review.googlesource.com/c/go/+/228785
Reviewed-by: Dan Scales <danscales@google.com>
When the seconds param is given, the block and mutex profile endpoints
report the difference between two measurements collected the given
seconds apart. Historically, the block and mutex profiles have reported
the cumulative counts since the process start, and it turned out they
are more useful when interpreted along with the time duration.
Note: cpu profile and trace endpoints already accept the "seconds"
parameter. With this CL, the block and mutex profile endpoints will
accept the "seconds" parameter. Providing the "seconds" parameter
to other types of profiles is an error.
This change moves runtime/pprof/internal/profile to internal/profile and
adds part of merge logic from github.com/google/pprof/profile/merge.go to
internal/profile, in order to allow both net/http/pprof and runtime/pprof
to access it.
Fixes#23401
Change-Id: Ie2486f1a63eb8ff210d7d3bc2de683e9335fd5cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/147598
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This first pass makes the rules using the condition code mask
(CCMask) and rotate parameters (RotateParams) aux values strongly
typed. This required adding strongly typed aux handling to the
block rulegen.
More CLs like this to follow, but this is probably the most
complex.
Passes toolstash-check -all.
Change-Id: Ie513b07d527f0c1b398d7748331442dcb5f7b17d
Reviewed-on: https://go-review.googlesource.com/c/go/+/228518
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
These were originally introduced for the binary export format, which
required forward references to arbitrary types and later filling them
in. They're no longer needed since we switched to the indexed export
format, which only requires forward references to declared types.
Passes toolstash-check.
Change-Id: I696dc9029ec7652d01ff49fb98e658a9ed510979
Reviewed-on: https://go-review.googlesource.com/c/go/+/228579
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These are analogous to URL.RawPath and URL.EscapedPath
and allow users fine-grained control over how the fragment
section of the URL is escaped. Some tools care about / vs %2f,
same problem as in paths.
Fixes#37776.
Change-Id: Ie6f556d86bdff750c47fe65398cbafd834152b47
Reviewed-on: https://go-review.googlesource.com/c/go/+/227645
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
The existing implementation is not compatible with JSON
escape as it uses hex escaping.
Unicode escape, instead, is valid for both JSON and JS.
This fix avoids creating a separate escaping context for
scripts of type "application/ld+json" and it is more
future-proof in case more JSON+JS contexts get added
to the platform (e.g. import maps).
Fixes#33671Fixes#37634
Change-Id: Id6f6524b4abc52e81d9d744d46bbe5bf2e081543
Reviewed-on: https://go-review.googlesource.com/c/go/+/226097
Reviewed-by: Carl Johnson <me@carlmjohnson.net>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When a concrete type doesn't exactly implement an interface, the error
messages produced by go/types are often unhelpful. The compiler shows
the expected signature versus the one found, which is useful, so add
this behavior here.
Fixesgolang/go#38475
Change-Id: I8b780b7e1f1f433a0efe670de3b1437053f42fba
Reviewed-on: https://go-review.googlesource.com/c/go/+/228457
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
If we are internal linking a static executable, and address assignment
has happened, then when emitting some parts of DWARF we can just emit
a function address directly instead of generating a relocation. For
external linking or other build modes, we are generating a relocatable
binary so we still need to emit relocations.
This CL inspired by Cherry's similar CL for pclntab at
https://go-review.googlesource.com/c/go/+/228478.
Change-Id: Ib03fbe2dd72d0ba746bf46015e0f2d6c3f3d53ab
Reviewed-on: https://go-review.googlesource.com/c/go/+/228537
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Now that we have converted pclntab pass to using the loader,
trampoline insertion should work again. Add a test.
Change-Id: Ia9a0485456ac75cc6e706218a359f109cd8fce43
Reviewed-on: https://go-review.googlesource.com/c/go/+/228141
Reviewed-by: Than McIntosh <thanm@google.com>
lib.Textp2 is used to assemble the global Textp2. It is not used
after that point. Free some memory.
Slightly reduces allocation: for linking cmd/compile,
Linksetup_GC 1.10MB ± 0% 0.84MB ± 0% -23.43% (p=0.008 n=5+5)
Change-Id: Iec4572e282655306d5ff3e490f8855d479e45acf
Reviewed-on: https://go-review.googlesource.com/c/go/+/228481
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The Context object we pass to GetThreadContext on Windows must be 16
byte-aligned. We also can't allocate in the contexts where we create
these, so they must be stack-allocated. There's no great way to do
this, but this CL makes the code at least a little clearer, and makes
profilem and preemptM more consistent with each other.
Change-Id: I5ec47a27d7580ed6003030bf953e668e8cae2cef
Reviewed-on: https://go-review.googlesource.com/c/go/+/207967
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Currently, as a result of us releasing worldsema now to allow STW events
during a mark phase, we release worldsema between starting the world and
having the goroutine block in STW mode. This inserts preemption points
which, if followed through, could lead to a deadlock. Specifically,
because user goroutine scheduling is disabled in STW mode, the goroutine
will block before properly releasing worldsema.
The fix here is to prevent preemption while releasing the worldsema.
Fixes#38404.
Updates #19812.
Change-Id: I8ed5b3aa108ab2e4680c38e77b0584fb75690e3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/228337
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
After CL 211357 (commit 499dc1c),
hasTests and numDecl were not updated properly for function
declarations with parameters, which affected the whole file
example detection logic. This caused examples like
package foo_test
func Foo(x int) {
}
func Example() {
fmt.Println("Hello, world!")
// Output: Hello, world!
}
to not be detected as whole file ones.
Change-Id: I9ebd47e52d7ee9d91eb6f8e0257511de69b2a402
GitHub-Last-Rev: cc71c31124
GitHub-Pull-Request: golang/go#37730
Reviewed-on: https://go-review.googlesource.com/c/go/+/222477
Reviewed-by: Agniva De Sarker <agniva.quicksilver@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Agniva De Sarker <agniva.quicksilver@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This saves 166 KiB for a tls.Dial hello world program (5382441 to
5212356 to bytes), by permitting the linker to remove TLS server code.
Change-Id: I16610b836bb0802b7d84995ff881d79ec03b6a84
Reviewed-on: https://go-review.googlesource.com/c/go/+/228111
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The Float.Sqrt method switches (for performance reasons) between
direct (uses Quo) and inverse (doesn't) computation, depending on the
precision, with threshold 128.
Unfortunately the implementation of recursive division in CL 172018
made Quo slightly slower exactly in the range around and below the
threshold Sqrt is using, so this strategy is no longer profitable.
The new division algorithm allocates more, and this has increased the
amount of allocations performed by Sqrt when using the direct method;
on low precisions the computation is fast, so additional allocations
have an negative impact on performance.
Interestingly, only using the inverse method doesn't just reverse the
effects of the Quo algorithm change, but it seems to make performances
better overall for small precisions:
name old time/op new time/op delta
FloatSqrt/64-4 643ns ± 1% 635ns ± 1% -1.24% (p=0.000 n=10+10)
FloatSqrt/128-4 1.44µs ± 1% 1.02µs ± 1% -29.25% (p=0.000 n=10+10)
FloatSqrt/256-4 1.49µs ± 1% 1.49µs ± 1% ~ (p=0.752 n=10+10)
FloatSqrt/1000-4 3.71µs ± 1% 3.74µs ± 1% +0.87% (p=0.001 n=10+10)
FloatSqrt/10000-4 35.3µs ± 1% 35.6µs ± 1% +0.82% (p=0.002 n=10+9)
FloatSqrt/100000-4 844µs ± 1% 844µs ± 0% ~ (p=0.549 n=10+9)
FloatSqrt/1000000-4 69.5ms ± 0% 69.6ms ± 0% ~ (p=0.222 n=9+9)
name old alloc/op new alloc/op delta
FloatSqrt/64-4 280B ± 0% 200B ± 0% -28.57% (p=0.000 n=10+10)
FloatSqrt/128-4 504B ± 0% 248B ± 0% -50.79% (p=0.000 n=10+10)
FloatSqrt/256-4 344B ± 0% 344B ± 0% ~ (all equal)
FloatSqrt/1000-4 1.30kB ± 0% 1.30kB ± 0% ~ (all equal)
FloatSqrt/10000-4 13.5kB ± 0% 13.5kB ± 0% ~ (p=0.237 n=10+10)
FloatSqrt/100000-4 123kB ± 0% 123kB ± 0% ~ (p=0.247 n=10+10)
FloatSqrt/1000000-4 1.83MB ± 1% 1.83MB ± 3% ~ (p=0.779 n=8+10)
name old allocs/op new allocs/op delta
FloatSqrt/64-4 8.00 ± 0% 5.00 ± 0% -37.50% (p=0.000 n=10+10)
FloatSqrt/128-4 11.0 ± 0% 5.0 ± 0% -54.55% (p=0.000 n=10+10)
FloatSqrt/256-4 5.00 ± 0% 5.00 ± 0% ~ (all equal)
FloatSqrt/1000-4 6.00 ± 0% 6.00 ± 0% ~ (all equal)
FloatSqrt/10000-4 6.00 ± 0% 6.00 ± 0% ~ (all equal)
FloatSqrt/100000-4 6.00 ± 0% 6.00 ± 0% ~ (all equal)
FloatSqrt/1000000-4 10.3 ±13% 10.3 ±13% ~ (p=1.000 n=10+10)
For example, 1.02µs for FloatSqrt/128 is actually better than what I
was getting on the same machine before the Quo changes.
The .8% slowdown on /1000 and /10000 appears to be real and it is
quite baffling (that codepath was not touched at all); it may be
caused by code alignment changes.
Change-Id: Ib03761cdc1055674bc7526d4f3a23d7a25094029
Reviewed-on: https://go-review.googlesource.com/c/go/+/228062
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This adds support support for the PCALIGN value 32. When this
directive occurs code will be aligned to 32 bytes unless
too many NOPs are needed, and then will fall back to 16
byte alignment.
On Linux the function's alignment is promoted from 16 to 32
in functions where PCALIGN 32 appears. On AIX the function's
alignment is left at 16 due to complexity with modifying its
alignment, which means code will be aligned to at least 16,
possibly 32 at times, which is still good.
Test was updated to accept new value.
Change-Id: I28e72d5f30ca472ed9ba736ddeabfea192d11797
Reviewed-on: https://go-review.googlesource.com/c/go/+/228258
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Begin refactoring dodata to try to convert it from a single giant blob
to something more hierarchical, with descriptive function names for
sub-parts.
Add a state object to hold things like "data" and "dataMaxAlign"
arrays that are used throughout dodata. Extract out the code that
allocates data symbols to sections into a separate method (this
method is still too big, probably needs to be refactored again).
No change in functionality.
Change-Id: I7b52dc2aff0356e7d4b5d6f629d907fd37d3082c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228259
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TestExtraFiles seems to be flaky on GNU/Linux systems when using cgo
because creating a new thread will call malloc which can create a new
arena which can open a file to see how many processors there are.
Try to avoid the flake by creating several new threads at process
startup time.
For #25628
Change-Id: Ie781acdbba475d993c39782fe172cf7f29a05b24
Reviewed-on: https://go-review.googlesource.com/c/go/+/228099
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Importing the time/tzdata package will embed a copy of the IANA
timezone database into the program. This will let the program work
correctly when the timezone database is not available on the system.
It will increase the size of the binary by about 800K.
You can also build a program with -tags timetzdata to embed the
timezone database in the program being built.
This is a roll forward of CL 224588 which was rolled back due to
test failures. In this version, the test is in the time package,
not the time/tzdata package. That lets us compare the zip file
to the time/tzdata package, ensuring that we are looking at similar
versions of tzdata information.
Fixes#21881Fixes#38013Fixes#38017
Change-Id: I916d9d8473abe201b897cdc2bbd9168df4ad671c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228101
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
When setting the edge state in register allocation we should only
be setting each register once. It is not possible for a register
to hold multiple values at once.
This CL converts the runtime error seen in #38195 into an internal
compiler error (ICE). It is better for the compiler to fail than
generate an incorrect program.
The bug reported in #38195 is now exposed as:
./parserc.go:459:11: internal compiler error: 'yaml_parser_parse_node': R5 is already set (v1074/v1241)
[stack trace]
Updates #38195.
Change-Id: Id95842fd850b95494cbd472b6fd5a55513ecacec
Reviewed-on: https://go-review.googlesource.com/c/go/+/228060
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When deallocating the input register to a phi so that the phi
itself could be allocated to that register the code was also
deallocating all copies of that phi input value. Those copies
of the value could still be live and if they were the register
allocator could reuse them incorrectly to hold speculative
copies of other phi inputs. This causes strange bugs.
No test because this is a very obscure scenario that is hard
to replicate but CL 228060 adds an assertion to the compiler
that does trigger when running the std tests on linux/s390x
without this CL applied. Hopefully that assertion will prevent
future regressions.
Fixes#38195.
Change-Id: Id975dadedd731c7bb21933b9ea6b17daaa5c9e1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/228061
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When inserting Select0 and Select1 ops we need to ensure that they
live in the same block as their argument. This is because they need
to be scheduled immediately after their argument for register and
flag allocation to work correctly.
Fixes#38356.
Change-Id: Iba384dbe87010f1c7c4ce909f08011e5f1de7fd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/227879
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 228106 moved the position at which we
checked whether a type switch variable had a particular type
from the type switch to the case statement, but only for
single, concrete types. This is a better position,
so this change changes the rest.
Change-Id: I601d4a5c4a0d9400e7804b9f1e729af948349a8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/228220
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Consider
switch x:= x.(type) {
case int:
// int stmts
case error:
// error stmts
}
Prior to this change, we lowered this roughly as:
if x, ok := x.(int); ok {
// int stmts
} else if x, ok := x.(error); ok {
// error stmts
}
x, ok := x.(error) is implemented with a call to runtime.assertE2I2 or runtime.assertI2I2.
x, ok := x.(int) generates inline code that checks whether x has type int,
and populates x and ok as appropriate. We then immediately branch again on ok.
The shortcircuit pass in the SSA backend is designed to recognize situations
like this, in which we are immediately branching on a bool value
that we just calculated with a branch.
However, the shortcircuit pass has limitations when the intermediate state has phis.
In this case, the phi value is x (the int).
CL 222923 improved the situation, but many cases are still unhandled.
I have further improvements in progress, which is how I found this particular problem,
but they are expensive, and may or may not see the light of day.
In the common case of a lone concrete type in a type switch case,
it is easier and cheaper to simply lower a different way, roughly:
if _, ok := x.(int); ok {
x := x.(int)
// int stmts
}
Instead of using a type assertion, though, we extract the value of x
from the interface directly.
This removes the need to track x (the int) across the branch on ok,
which removes the phi, which lets the shortcircuit pass do its job.
Benchmarks for encoding/binary show improvements, as well as some
wild swings on the super fast benchmarks (alignment effects?):
name old time/op new time/op delta
ReadSlice1000Int32s-8 5.25µs ± 2% 4.87µs ± 3% -7.11% (p=0.000 n=44+49)
ReadStruct-8 451ns ± 2% 417ns ± 2% -7.39% (p=0.000 n=45+46)
WriteStruct-8 412ns ± 2% 405ns ± 3% -1.58% (p=0.000 n=46+48)
ReadInts-8 296ns ± 8% 275ns ± 3% -7.23% (p=0.000 n=48+50)
WriteInts-8 324ns ± 1% 318ns ± 2% -1.67% (p=0.000 n=44+49)
WriteSlice1000Int32s-8 5.21µs ± 2% 4.92µs ± 1% -5.67% (p=0.000 n=46+44)
PutUint16-8 0.58ns ± 2% 0.59ns ± 2% +0.63% (p=0.000 n=49+49)
PutUint32-8 0.87ns ± 1% 0.58ns ± 1% -33.10% (p=0.000 n=46+44)
PutUint64-8 0.66ns ± 2% 0.87ns ± 2% +33.07% (p=0.000 n=47+48)
LittleEndianPutUint16-8 0.86ns ± 2% 0.87ns ± 2% +0.55% (p=0.003 n=47+50)
LittleEndianPutUint32-8 0.87ns ± 1% 0.87ns ± 1% ~ (p=0.547 n=45+47)
LittleEndianPutUint64-8 0.87ns ± 2% 0.87ns ± 1% ~ (p=0.451 n=46+47)
ReadFloats-8 79.8ns ± 5% 75.9ns ± 2% -4.83% (p=0.000 n=50+47)
WriteFloats-8 89.3ns ± 1% 88.9ns ± 1% -0.48% (p=0.000 n=46+44)
ReadSlice1000Float32s-8 5.51µs ± 1% 4.87µs ± 2% -11.74% (p=0.000 n=47+46)
WriteSlice1000Float32s-8 5.51µs ± 1% 4.93µs ± 1% -10.60% (p=0.000 n=48+47)
PutUvarint32-8 25.9ns ± 2% 24.0ns ± 2% -7.02% (p=0.000 n=48+50)
PutUvarint64-8 75.1ns ± 1% 61.5ns ± 2% -18.12% (p=0.000 n=45+47)
[Geo mean] 57.3ns 54.3ns -5.33%
Despite the rarity of type switches, this generates noticeably smaller binaries.
file before after Δ %
addr2line 4413296 4409200 -4096 -0.093%
api 5982648 5962168 -20480 -0.342%
cgo 4854168 4833688 -20480 -0.422%
compile 19694784 19682560 -12224 -0.062%
cover 5278008 5265720 -12288 -0.233%
doc 4694824 4682536 -12288 -0.262%
fix 3411336 3394952 -16384 -0.480%
link 6721496 6717400 -4096 -0.061%
nm 4371152 4358864 -12288 -0.281%
objdump 4760960 4752768 -8192 -0.172%
pprof 14810820 14790340 -20480 -0.138%
trace 11681076 11668788 -12288 -0.105%
vet 8285464 8244504 -40960 -0.494%
total 115824120 115627576 -196544 -0.170%
Compiler performance is marginally improved (note that go/types has many type switches):
name old alloc/op new alloc/op delta
Template 35.0MB ± 0% 35.0MB ± 0% +0.09% (p=0.008 n=5+5)
Unicode 28.5MB ± 0% 28.5MB ± 0% ~ (p=0.548 n=5+5)
GoTypes 114MB ± 0% 114MB ± 0% -0.76% (p=0.008 n=5+5)
Compiler 541MB ± 0% 541MB ± 0% -0.03% (p=0.008 n=5+5)
SSA 1.17GB ± 0% 1.17GB ± 0% ~ (p=0.841 n=5+5)
Flate 21.9MB ± 0% 21.9MB ± 0% ~ (p=0.421 n=5+5)
GoParser 26.9MB ± 0% 26.9MB ± 0% ~ (p=0.222 n=5+5)
Reflect 74.6MB ± 0% 74.6MB ± 0% ~ (p=1.000 n=5+5)
Tar 32.9MB ± 0% 32.8MB ± 0% ~ (p=0.056 n=5+5)
XML 42.4MB ± 0% 42.1MB ± 0% -0.77% (p=0.008 n=5+5)
[Geo mean] 73.2MB 73.1MB -0.15%
name old allocs/op new allocs/op delta
Template 377k ± 0% 377k ± 0% +0.06% (p=0.008 n=5+5)
Unicode 354k ± 0% 354k ± 0% ~ (p=0.095 n=5+5)
GoTypes 1.31M ± 0% 1.30M ± 0% -0.73% (p=0.008 n=5+5)
Compiler 5.44M ± 0% 5.44M ± 0% -0.04% (p=0.008 n=5+5)
SSA 11.7M ± 0% 11.7M ± 0% ~ (p=1.000 n=5+5)
Flate 239k ± 0% 239k ± 0% ~ (p=1.000 n=5+5)
GoParser 302k ± 0% 302k ± 0% -0.04% (p=0.008 n=5+5)
Reflect 977k ± 0% 977k ± 0% ~ (p=0.690 n=5+5)
Tar 346k ± 0% 346k ± 0% ~ (p=0.889 n=5+5)
XML 431k ± 0% 430k ± 0% -0.25% (p=0.008 n=5+5)
[Geo mean] 806k 806k -0.10%
For packages with many type switches, this considerably shrinks function text size.
Some examples:
file before after Δ %
encoding/binary.s 30726 29504 -1222 -3.977%
go/printer.s 77597 76005 -1592 -2.052%
cmd/vendor/golang.org/x/tools/go/ast/astutil.s 65704 63318 -2386 -3.631%
cmd/vendor/golang.org/x/tools/go/analysis/passes/unreachable.s 8047 7714 -333 -4.138%
Text size regressions are rare.
Change-Id: Ic10982bbb04876250eaa5bfee97990141ae5fc28
Reviewed-on: https://go-review.googlesource.com/c/go/+/228106
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
In the dev.link branch we continued developing the new object
file format support and the linker improvements described in
https://golang.org/s/better-linker . Since the last merge, more
progress has been made to improve the new linker.
This is a clean merge, as we already merged master branch to
dev.link first.
Change-Id: I1fef2b1d94bd2410001142da8991544da5ee896d
ascompatee does not generate 'x = x' during return, so we don't have to
check for samelist and disguising special return anymore.
While at it, also remove samelist, as this is the only place it's used.
Passes toolstash-check.
Change-Id: I41c7b077d562aadb5916a61e2ab6229bae3cdef4
Reviewed-on: https://go-review.googlesource.com/c/go/+/227807
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Currently this CL has no effect because V == x.typ in the affected
code. But if we should ever manipulate V (e.g., to support some form
of lazy evaluation of the type), not using V consistently would
lead to a subtle bug.
Change-Id: I465e72d18bbd2b6cd8fcbd746e0d28d14f758c03
Reviewed-on: https://go-review.googlesource.com/c/go/+/228105
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Quote original values passed as substring of ParseError.Message.
Improves the user experience of ParseDuration by making it
quote its original argument, for example:
_, err := time.ParseDuration("for breakfast")
will now produce an error, which when printed out is:
time: invalid duration "for breakfast"
instead of:
time: invalid duration for breakfast
Adapt test cases for format.Parse and format.ParseDuration.
Fixes#38295
Change-Id: Ife322c8f3c859e1e4e8dd546d4cf0d519b4bfa81
Reviewed-on: https://go-review.googlesource.com/c/go/+/227878
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- CopyN: 5 creates ambiguity with respect to whitespace and upperbound
- TeeReader less boilerplate and displays a common usage of it
- SectionReader_* all sections unified to 5:17 for clarity
- SectionReader_Seek uses io.Copy to stdout like other examples
- Seeker_Seek remove useless prints
- Pipe print reader like other examples
Updates #36417
Change-Id: Ibd01761d5a5786cdb1ea934f7a98f8302430c8a5
GitHub-Last-Rev: 4c17f9a8e3
GitHub-Pull-Request: golang/go#38379
Reviewed-on: https://go-review.googlesource.com/c/go/+/227868
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We split the output into blocks and write them in parallel. The
block boundary is placed at symbol boundary. In the case of outer
symbols and sub symbols, currently we may split an outer symbol
into two blocks. This will be bad, as the two blocks will have
overlapping address range, since outer symbol and its sub symbols
occupies the same address range.
Make sure we place block boundary only at top-level symbol
boundaries.
Fix boringcrypto build.
Change-Id: I56811d3969c65c6be97672d8e1f1ea36b2447465
Reviewed-on: https://go-review.googlesource.com/c/go/+/227957
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
(cherry picked from commit 636fa3148f)
Reviewed-on: https://go-review.googlesource.com/c/go/+/228138
If -d=ssa/PASS/debug=N is specified (N >= 2) for a rewrite pass
(e.g. lower), when a Value (or Block) is rewritten, print the
Value (or Block) before and after.
For #31915.
Updates #19013.
Change-Id: I80eadd44302ae736bc7daed0ef68529ab7a16776
Reviewed-on: https://go-review.googlesource.com/c/go/+/176718
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Importing the time/tzdata package will embed a copy of the IANA
timezone database into the program. This will let the program work
correctly when the timezone database is not available on the system.
It will increase the size of the binary by about 800K.
You can also build a program with -tags timetzdata to embed the
timezone database in the program being built.
Fixes#21881Fixes#38013Fixes#38017
Change-Id: Iffddee72a8f46c95fee3bcde43c142d6899d9246
Reviewed-on: https://go-review.googlesource.com/c/go/+/224588
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Following CL 226818, the compiler will allow inlining a single cycle in
an inline chain. Immediately-recursive functions are still disallowed,
which is what this heuristic refers to.
Add a regression test for this case.
Note that in addition to this check, if the compiler were to inline
multiple cycles via a loop (i.e., rather than appending duplicate code),
much more work would be required here to handle a single address
appearing in multiple different inline frames.
Updates #29737
Change-Id: I88de15cfbeabb9c04381e1c12cc36778623132a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/227346
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
TestTryAdd is particularly brittle because it tests some real cases by
constructing fake sample stack frames. If those frames don't correctly
represent what the runtime would generate then they may fail to catch
regressions.
Instead, call runtime.Callers at the bottom of real function calls to
generate real frames as a base for truncation, etc in tests. Several of
these tests still have to fake parts of the frames to test the right
thing, but this is a bit less fragile.
This change is equivalent to the original
0dfb0513ec (golang.org/cl/227484), except
that the test skips if the test functions aren't inline (e.g., noopt
builders).
Change-Id: Ie9e32b5660cfe28a924f9cfcddcd887ea2effd66
Reviewed-on: https://go-review.googlesource.com/c/go/+/227922
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
It is no longer used. The only remaining use is in generating
Plan 9 debug info, which is already not supported.
Change-Id: Ia023d6f2fa7d57b97ba861ce464e2eec8ac2d1f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/228142
Reviewed-by: Than McIntosh <thanm@google.com>
lib.Textp was used for text address assignment and trampoline
insertion. Now that it has been converted to using the loader,
no need to populate lib.Textp.
Port the logic of canonicalizing dupok symbol's package to the
loader.
unit.Textp was used for DWARF generation, which has also been
converted to using the loader.
Change-Id: I22d4dd30a52a29dd5b1b7b795d43a19f6215e4ac
Reviewed-on: https://go-review.googlesource.com/c/go/+/228140
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Mark nextFreeFast as not inline, as it is too expensive to inline on riscv64.
Also remove riscv64 from non-atomic inline architectures, as we now have
atomic intrisics.
Updates #22239
Change-Id: I6e0e72c1192070e39f065bee486f48df4cc74b35
Reviewed-on: https://go-review.googlesource.com/c/go/+/227808
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The taskid mode is based on the goroutine-oriented trace view,
which displays each goroutine as a separate row. This is good when
inspecting the interaction and timeline among related goroutines,
and the user region information (associated with each goroutine)
in detail, but when many goroutines are involved, this mode does
not scale.
The focustask mode is based on the default trace view with the
user task hierarchy at the top. Each row is a P and there are only
a handful number of Ps in most cases, so browsers can handle
this mode more gracefully. But, I had difficulty in displaying
the user region information (because a goroutine can start/stop/
migrate across Ps, and visualizing the stack of regions nicely
was complicated). It may be doable, but it's a work.
This CL surfaces the hidden focustask mode. Moreover, use it
as the default user task view mode. The taskid mode can be still
accessible through 'goroutine view' links.
Unlike taskid-based user annotation view that extends goroutine-based
trace view, the focustask view
Change-Id: Ib691a5e1dd14695fa70a0ae67bff62817025e8c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/227921
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Otherwise, just copying the aux and auxint fields doesn't make much sense.
(Although there's no bug - it just means it isn't typechecked correctly.)
Change-Id: I4e21ac67f0c7bfd04ed5af1713cd24bca08af092
Reviewed-on: https://go-review.googlesource.com/c/go/+/227962
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
HWCap and HWCap2 are no longer linknamed into package runtime. Also,
merge two sentences both starting with "These are..." and don't mention
any file name where archauxv is defined, as it become outdated if
support for a new $GOOS/$GOARCH combination is added. This is e.g.
already the case for arm64, where archauxv is also defined for
freebsd/arm64.
Change-Id: I9314a66633736b12e777869a832d8b79d442a6f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/228057
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Remove the loader's AttrContainer method, since it is no longer
needed. All of the code in the linker that used s.Attr.Container() is
now upstream of loadlibfull(), and the code in question now uses local
bitmaps to keep track of container text symbols as opposed to loader
methods.
Change-Id: Iae956d24bef2776e181c3b8208476dcb0b9a2916
Reviewed-on: https://go-review.googlesource.com/c/go/+/227959
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The pclntab phase generates a series of "inltree.*" symbols with
inlining related pcdata; these symbols previously were given names and
enterered into the symbol lookup table, but there is no real reason to
do this, since they never need to be looked up when pcln generation is
done. Switch them over to anonymous symbols.
So as to insure that the later symtab phase picks them up correctly,
assign them a type of SGOFUNC instead of SRODATA, and change symtab to
look for this when assigning symbols to groups.
Change-Id: I38225dbb130ad7aea5d16f79cef3d8d388c61c2b
Reviewed-on: https://go-review.googlesource.com/c/go/+/227845
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
We split the output into blocks and write them in parallel. The
block boundary is placed at symbol boundary. In the case of outer
symbols and sub symbols, currently we may split an outer symbol
into two blocks. This will be bad, as the two blocks will have
overlapping address range, since outer symbol and its sub symbols
occupies the same address range.
Make sure we place block boundary only at top-level symbol
boundaries.
Fix boringcrypto build.
Change-Id: I56811d3969c65c6be97672d8e1f1ea36b2447465
Reviewed-on: https://go-review.googlesource.com/c/go/+/227957
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
In the review of CL 222923, Keith expressed concern
that we could end up with invalid phis.
We have some code to handle this, but on further reflection,
I think it might not handle some cases in which phis get moved.
I can't create a failing case, but guard against it nevertheless.
Change-Id: Ib3a07ac1d36a674c72dcb9cc9261ccfcb716b5a3
Reviewed-on: https://go-review.googlesource.com/c/go/+/227697
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 226737 optimizes len check when make slice. The comment that cap is
constrainted to [0, 2^31) is not quite true, it's 31 or 63 depends on
whether it's 32/64-bit systems.
Change-Id: I6f54e41827ffe4d0b67a44975da3ce07b2fabbad
Reviewed-on: https://go-review.googlesource.com/c/go/+/227803
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Move a lot of the constant folding rules to use strongly
typed AuxInt fields.
We need more than a cast to convert AuxInt to, e.g., float32.
Make conversion functions for converting back and forth.
Change-Id: Ia3d95ee3583ee2179a10938e20210a7617358c88
Reviewed-on: https://go-review.googlesource.com/c/go/+/227866
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The race detector can't handle ASLR (adddress space layout randomization).
On some platforms it can re-exec the binary with ASLR off. But not NetBSD.
For NetBSD we have to introduce a special ELF header note that tells
the kernel not to use ASLR.
This works fine for internal linking. For external linking it also works,
but "readelf -n" shows multiple notes in the resulting binary. Maybe the
last one wins? Not sure, but it appears to work.
Change-Id: I5fe6dd861e42a8293f64d0dacb166631ea670fcc
Reviewed-on: https://go-review.googlesource.com/c/go/+/227864
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
For 1.15.
From the test:
{"range":{"start":{"line":7,"character":13},"end":{...},"severity":3,"code":"leaks","source":"go compiler","message":"parameter z leaks to ~r2 with derefs=0","relatedInformation":[
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":13},"end":{...}},"message":"escflow: flow: y = z:"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":13},"end":{...}},"message":"escflow: from y = \u003cN\u003e (assign-pair)"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":13},"end":{...}},"message":"escflow: flow: ~r1 = y:"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":4,"character":11},"end":{...}},"message":"inlineLoc"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":13},"end":{...}},"message":"escflow: from y.b (dot of pointer)"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":4,"character":11},"end":{...}},"message":"inlineLoc"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":13},"end":{...}},"message":"escflow: from \u0026y.b (address-of)"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":4,"character":9},"end":...}},"message":"inlineLoc"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":13},"end":{...}},"message":"escflow: from ~r1 = \u003cN\u003e (assign-pair)"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":3},"end":...}},"message":"escflow: flow: ~r2 = ~r1:"},
{"location":{"uri":"file://T/file.go","range":{"start":{"line":9,"character":3},"end":...}},"message":"escflow: from return (*int)(~r1) (return)"}]}
Change-Id: Idf02438801f63e487c35a928cf5a0b6d3cc48674
Reviewed-on: https://go-review.googlesource.com/c/go/+/206658
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
If a Go symbol is cloned to external, we should preserve its Aux
symbols for FuncInfo, etc.. We already do this in
loader.FuncInfo, but not in FuncInfo.Funcdata. Do it in the
latter as well. In fact, since FuncInfo and Funcdata should use
the same set of auxs, just record the auxs and reuse.
Should fix PPC64 build.
Change-Id: Iab9020eaca15d98fe3bb41f50f0d5bdb4999e8c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/227848
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Previous PCALIGN support on ppc64x only accepted 8 and 16 byte
alignment since the default function alignment was 16. Now that
the function's alignment can be set to a larger value when needed,
PCALIGN can accept 32. When this happens then the function's
alignment will be changed to 32.
Test has been updated to recognized this new value.
Change-Id: If82c3cd50d7c686fcf8a9e819708b15660cdfa63
Reviewed-on: https://go-review.googlesource.com/c/go/+/227775
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Rework the linker's pcln phase to work with the new loader. As part of
this set of changes the handling of "go.file..." symbols has been
revised somewhat -- previously they were treated as always live in the
loader, and now we no longer do this.
The original plan had been to have the new implementation generate
nameless "inltree" symbols, however the plan now is to keep them
named for now and convert them to nameless in a subsequent patch.
Change-Id: If71c93ff1f146dbb63b6ee2546308acdc94b643c
Reviewed-on: https://go-review.googlesource.com/c/go/+/227759
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Expand the methods for the FuncInfo helper, to support reading the
contents of an object file FuncInfo aux symbol using the new style
(that is to say, incrementally and without allocating slices to hold
the various bits).
Change-Id: I953d72c4a53f98c840e6b25b08fd33dc4a833dd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/227585
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Right now the Aux and AuxInt fields of ssa.Values are typed as
interface{} and int64, respectively. Each rule that uses these values
must cast them to the type they actually are (*obj.LSym, or int32, or
ValAndOff, etc.), use them, and then cast them back to interface{} or
int64.
We know for each opcode what the types of the Aux and AuxInt fields
should be. So let's modify the rule generator to declare the types to
be what we know they should be, autoconverting to and from the generic
types for us. That way we can make the rules more type safe.
It's difficult to make a single CL for this, so I've coopted the "=>"
token to indicate a rule that is strongly typed. "->" rules are
processed as before. That will let us migrate a few rules at a time in
separate CLs. Hopefully we can reach a state where all rules are
strongly typed and we can drop the distinction.
This CL changes just a few rules to get a feel for what this
transition would look like.
I've decided not to put explicit types in the rules. I think it
makes the rules somewhat clearer, but definitely more verbose.
In particular, the passthrough rules that don't modify the fields
in question are verbose for no real reason.
Change-Id: I63a1b789ac5702e7caf7934cd49f784235d1d73d
Reviewed-on: https://go-review.googlesource.com/c/go/+/190197
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This changes the code generated for variable length shift
counts to use isel instead of instructions that set and
read the carry flag.
This reduces the generated code for shifts like this
by 1 instruction and avoids the use of instructions to
set and read the carry flag.
This sequence can be found in strconv with these results
on power9:
Atof64Decimal 71.6ns ± 0% 68.3ns ± 0% -4.61%
Atof64Float 95.3ns ± 0% 90.9ns ± 0% -4.62%
Atof64FloatExp 153ns ± 0% 149ns ± 0% -2.61%
Atof64Big 234ns ± 0% 232ns ± 0% -0.85%
Atof64RandomBits 348ns ± 0% 369ns ± 0% +6.03%
Atof64RandomFloats 262ns ± 0% 262ns ± 0% ~
Atof32Decimal 72.0ns ± 0% 68.2ns ± 0% -5.28%
Atof32Float 92.1ns ± 0% 87.1ns ± 0% -5.43%
Atof32FloatExp 159ns ± 0% 158ns ± 0% -0.63%
Atof32Random 194ns ± 0% 191ns ± 0% -1.55%
Some tests in codegen/shift.go are enabled to verify the
expected instructions are generated.
Change-Id: I968715d10ada405a8c46132bf19b8ed9b85796d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/227337
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This is in prepration of removing the old loader.Reloc. This also
introduces a way of adding a slice of relocations more
efficiently (will be used in the next CL).
Change-Id: I3eaee7fb3a3e102a8670990f4a31c40d0b17b8c2
Reviewed-on: https://go-review.googlesource.com/c/go/+/227761
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Tweak the runtime's GDB python test to try to reduce flake failures.
Background: the intent of the testpoint in question is to make sure
that python-supported commands like "info goroutines" or "goroutine 1
backtrace" work properly. The Go code being run under the debugger as
part of the test is single-threaded, but the test is written assuming
that in addition to the primary goroutine there will be other
background goroutines available (owned by the runtime). The flakiness
seems to crop up the most when requesting a backtrace for one of these
background goroutines; the speculation is that if we catch a
runtime-owned goroutine in an odd state, this could interfere with the
test.
The change in this patch is to explicitly start an additional
goroutine from the main thread, so that when the debugger stops the
main thread we can be sure that there is some other non-main goroutine
in a known state.
This change authored by Josh Bleecher Snyder <josharian@gmail.com>.
Updates #24616.
Change-Id: I45682323d5898e5187c0adada7c5d117e92f403b
Reviewed-on: https://go-review.googlesource.com/c/go/+/226558
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Also set a deadline in TestCloseWrite so that we can more easily
determine which kind of connection is getting stuck on the
darwin-arm64-corellium builder (#34837).
Change-Id: I8ccacbf436e8e493fb2298a79b17e0af8fc6eb81
Reviewed-on: https://go-review.googlesource.com/c/go/+/227588
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For map with hint larger than BUCKETSIZE, makemap ignore allocated
bucket and allocate buckets itself. So do not allocate bucket in
this case, save us the cost of zeroing+assignment to the bucket.
name old time/op new time/op delta
NewEmptyMap-12 3.89ns ± 4% 3.88ns ± 2% ~ (p=0.939 n=19+20)
NewSmallMap-12 23.3ns ± 3% 23.1ns ± 2% ~ (p=0.307 n=18+17)
NewEmptyMapHintLessThan8-12 6.43ns ± 3% 6.31ns ± 2% -1.72% (p=0.000 n=19+18)
NewEmptyMapHintGreaterThan8-12 159ns ± 2% 150ns ± 1% -5.79% (p=0.000 n=20+18)
Benchmark run with commit ab7c174 reverted, see #38314.
Fixes#20184
Change-Id: Ic021f57454c3a0dd50601d73bbd77b8faf8d93b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/227458
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The previous change moved code around to create slicesym.
This change simplifies slicesym and its callsites
by accepting an int64 for lencap instead of a node,
and by removing all the calls to gdata.
It also stops modifying n,
which avoids the need to make a copy of it.
Passes toolstash-check.
Change-Id: I4d25454d11b4bb8941000244443e3c99eef4bdd0
Reviewed-on: https://go-review.googlesource.com/c/go/+/227550
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Some runtime calls accept a slice, but only use ptr and len.
This change modifies most such routines to accept only ptr and len.
After this change, the only runtime calls that accept an unnecessary
cap arg are concatstrings and slicerunetostring.
Neither is particularly common, and both are complicated to modify.
Negligible compiler performance impact. Shrinks binaries a little.
There are only a few regressions; the one I investigated was
due to register allocation fluctuation.
Passes 'go test -race std cmd', modulo #38265 and #38266.
Wow, does that take a long time to run.
Updates #36890
file before after Δ %
compile 19655024 19655152 +128 +0.001%
cover 5244840 5236648 -8192 -0.156%
dist 3662376 3658280 -4096 -0.112%
link 6680056 6675960 -4096 -0.061%
pprof 14789844 14777556 -12288 -0.083%
test2json 2824744 2820648 -4096 -0.145%
trace 11647876 11639684 -8192 -0.070%
vet 8260472 8256376 -4096 -0.050%
total 115163736 115118808 -44928 -0.039%
Change-Id: Idb29fa6a81d6a82bfd3b65740b98cf3275ca0a78
Reviewed-on: https://go-review.googlesource.com/c/go/+/227163
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Returning an URL.String() without the password is very useful for
situations where the URL is supposed to be logged and the password is
not useful to be shown.
This method re-uses URL.String() but with the password scrubbed and
substituted for a "xxxxx" in order to make it obvious that there was a
password. If the URL had no password then no "xxxxx" will be shown.
Fixes#34855
Change-Id: I7f17d81aa09a7963d2731d16fe15c6ae8e2285fc
GitHub-Last-Rev: 46d06dbc4f
GitHub-Pull-Request: golang/go#35578
Reviewed-on: https://go-review.googlesource.com/c/go/+/207082
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
The divBasic function computes the quotient of big nats u/v word by word.
It estimates each word qhat by performing a long division (top 2 words of u
divided by top word of v), looks at the next word to correct the estimate,
then perform a full multiplication (qhat*v) to catch any inaccuracy in the
estimate.
In the latter case, "negative" values appear temporarily and carries
must be carefully managed, and the recursive division refactoring
introduced a case where qhat*v has the same length as v, triggering an
out-of-bounds write in the case it happens when computing the top word
of the quotient.
Fixes#37499
Change-Id: I15089da4a4027beda43af497bf6de261eb792f94
Reviewed-on: https://go-review.googlesource.com/c/go/+/221980
Reviewed-by: Robert Griesemer <gri@golang.org>
The cgo build tag is not necessary for root_darwin_arm64.go. We can't
build for darwin/arm64 without cgo, and even if we did 1) this code
would work fine 2) the no-cgo code that shells out to
/usr/bin/security would not work.
(Suggested by Filippo.)
Change-Id: I98cac2ea96ec5ac1ae60b7e32d195d5e86e2bd66
Reviewed-on: https://go-review.googlesource.com/c/go/+/227583
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Adds a GOMODCACHE environment variable that's used by cmd/go to determine the
location of the module cache. The default value of GOMODCACHE will be
GOPATH[0]/pkg/mod, the default location of the module cache before this change.
Replace the cmd/go/internal/modfetch.PkgMod variable which previously held the
location of the module cache with the new cmd/go/internal/cfg.GOMODCACHE
variable, for consistency with many of the other environment variables that
affect the behavior of cmd/go. (Most of the changes in this CL are due to
moving/renaming the variable.)
The value of cfg.GOMODCACHE is now set using a variable initializer. It was
previously set in cmd/go/internal/modload.Init.
The location of GOPATH/pkg/sumdb is unchanged by this CL. While it was
previously determined using the value of PkgMod, it now is determined
independently dirctly from the value of GOPATH[0].
Fixes#34527
Change-Id: Id4d31d217b3507d6057c8ef7c52af1a0606603e4
Reviewed-on: https://go-review.googlesource.com/c/go/+/219538
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Don't emit an error for undefined symbol in trampoline
generation pass, which will be duplicate as we'll emit a better
one later.
Fix TestUndefinedRelocErrors on PPC64.
Change-Id: I964d4bd63ec4b4c6eb5d98caf68db93ce6488bf5
Reviewed-on: https://go-review.googlesource.com/c/go/+/227617
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
TestPingPongHog tests properties of the scheduler.
But the race detector intentionally does randomized scheduling,
so the test is not applicable.
Fixes#38266
Change-Id: Ib06aa317b2776cb1faa641c4e038e2599cf70b2d
Reviewed-on: https://go-review.googlesource.com/c/go/+/227344
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Implement text address assignment and trampoline generation using
the loader.
Note: the trampoline insertion part doesn't actually work. It
also needs to propagate Aux symbols for external symbols in
LoadFull. But it won't be needed after converting pclntab
generation, so I'll leave it out for now. This could break
linking large binaries on PPC64 and ARM.
Change-Id: Ie46a35b25d7c027983dd877207cfa8f67c32530b
Reviewed-on: https://go-review.googlesource.com/c/go/+/227482
Reviewed-by: Than McIntosh <thanm@google.com>
SymFile, derived from sym.Symbol.File, is supposed to return the
package path, instead of the file name (arguably the name is
confusing). Make it so, and rename it to SymPkg.
Change-Id: I67bcd12f67cea271f2a2ce3c5724e5d228f5b2f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/227481
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
TestTryAdd is particularly brittle because it tests some real cases by
constructing fake sample stack frames. If those frames don't correctly
represent what the runtime would generate then they may fail to catch
regressions.
Instead, call runtime.Callers at the bottom of real function calls to
generate real frames as a base for truncation, etc in tests. Several of
these tests still have to fake parts of the frames to test the right
thing, but this is a bit less fragile.
Change-Id: I62522a9ded5544b06d1bf28550af5400f3af667b
Reviewed-on: https://go-review.googlesource.com/c/go/+/227484
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This change adds CFA information to the assembly function 'crosscall1'
and reorgnizes its code to establish well-formed prologue and epilogue.
It will fix an infinite callstack issue when debugging cgo program with
GDB on arm64.
Brief root cause analysis:
GDB's aarch64 unwinder parses prologue to determine current frame's size
and previous PC&SP if CFA information is not available.
The unwinder parses the prologue of 'crosscall1' to determine a frame size
of 0x10, then turns to its next frame trying to compute its previous PC&SP
as they are not saved on current frame's stack as per its 'traditional frame
unwind' rules, which ends up getting an endless frame chain like:
[callee] : pc:<pc0>, sp:<sp0>
crosscall1: pc:<pc1>, sp:<sp0>+0x10
[caller] : pc:<pc1>, sp:<sp0>+0x10+0x10
[caller] : pc:<pc1>, sp:<sp0>+0x10+0x10+0x10
...
GDB fails to detect the 'caller' frame is same as 'crosscall1' and terminate
unwinding since SP increases everytime.
Fixes#37238
Change-Id: Ia6bd8555828541a3a61f7dc9b94dfa00775ec52a
Reviewed-on: https://go-review.googlesource.com/c/go/+/226999
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I took some of the infrastructure from Austin's lock logging CR
https://go-review.googlesource.com/c/go/+/192704 (with deadlock
detection from the logs), and developed a setup to give static lock
ranking for runtime locks.
Static lock ranking establishes a documented total ordering among locks,
and then reports an error if the total order is violated. This can
happen if a deadlock happens (by acquiring a sequence of locks in
different orders), or if just one side of a possible deadlock happens.
Lock ordering deadlocks cannot happen as long as the lock ordering is
followed.
Along the way, I found a deadlock involving the new timer code, which Ian fixed
via https://go-review.googlesource.com/c/go/+/207348, as well as two other
potential deadlocks.
See the constants at the top of runtime/lockrank.go to show the static
lock ranking that I ended up with, along with some comments. This is
great documentation of the current intended lock ordering when acquiring
multiple locks in the runtime.
I also added an array lockPartialOrder[] which shows and enforces the
current partial ordering among locks (which is embedded within the total
ordering). This is more specific about the dependencies among locks.
I don't try to check the ranking within a lock class with multiple locks
that can be acquired at the same time (i.e. check the ranking when
multiple hchan locks are acquired).
Currently, I am doing a lockInit() call to set the lock rank of most
locks. Any lock that is not otherwise initialized is assumed to be a
leaf lock (a very high rank lock), so that eliminates the need to do
anything for a bunch of locks (including all architecture-dependent
locks). For two locks, root.lock and notifyList.lock (only in the
runtime/sema.go file), it is not as easy to do lock initialization, so
instead, I am passing the lock rank with the lock calls.
For Windows compilation, I needed to increase the StackGuard size from
896 to 928 because of the new lock-rank checking functions.
Checking of the static lock ranking is enabled by setting
GOEXPERIMENT=staticlockranking before doing a run.
To make sure that the static lock ranking code has no overhead in memory
or CPU when not enabled by GOEXPERIMENT, I changed 'go build/install' so
that it defines a build tag (with the same name) whenever any experiment
has been baked into the toolchain (by checking Expstring()). This allows
me to avoid increasing the size of the 'mutex' type when static lock
ranking is not enabled.
Fixes#38029
Change-Id: I154217ff307c47051f8dae9c2a03b53081acd83a
Reviewed-on: https://go-review.googlesource.com/c/go/+/207619
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Extend CL 220417 (which removed the integer Greater and Geq ops) to
floating point comparisons. Greater and Geq can always be
implemented using Less and Leq.
Fixes#37316.
Change-Id: Ieaddb4877dd0ff9037a1dd11d0a9a9e45ced71e7
Reviewed-on: https://go-review.googlesource.com/c/go/+/222397
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
In the commit message of CL 212360, I wrote:
> This new intrinsic ... generates MOVB+TESTB+NE.
> (It is possible that MOVBQZX+TESTQ+NE would be better.)
I should have tested. MOVBQZX+TESTQ+NE does in fact appear to be better.
For the benchmark in #36196, on my machine:
name old time/op new time/op delta
FMA-8 0.86ns ± 6% 0.70ns ± 5% -18.79% (p=0.000 n=98+97)
NonFMA-8 0.61ns ± 5% 0.60ns ± 4% -0.74% (p=0.001 n=100+97)
Interestingly, these are both considerably faster than
the measurements I took a couple of months ago (1.4ns/2ns).
It appears that CL 219131 (clearing VZEROUPPER in asyncPreempt) helped a lot.
And FMA is now once again slower than NonFMA, although this change
helps it regain some ground.
Updates #15808
Updates #36351
Updates #36196
Change-Id: I8a326289a963b1939aaa7eaa2fab2ec536467c7d
Reviewed-on: https://go-review.googlesource.com/c/go/+/227238
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The test was not preserving temporary directory flags leading to a
failure on windows with:
mkdir C:\WINDOWS\go-build315158903: Access is denied.
Fixes#38251
Change-Id: I6ee31b31e84b7f6e75ea6ee0f3b8c094835bf5d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/227497
Reviewed-by: David Chase <drchase@google.com>
The code in setArchsyms that sets up TOC symbols was buggy; it was
kicking in only for aix-ppc64 and not linux-ppc64. These symbols are
required for both ABIs, so change the guard in question from
"ctx.IsAIX()" to "ctxt.IsPPC64()". Also, the code to create versioned
".TOC." syms was not passing the correct symbol version to the loader
(now fixed).
Change-Id: I356071e528beadad20f61d067059eaf26f06e06b
Reviewed-on: https://go-review.googlesource.com/c/go/+/227257
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
On s390x, we already have MVCIN opcode in asmz.go,
but we did not use it. This CL uses that opcode and adds MVCIN
instruction.
MVCIN instruction can be used to move data from one storage location
to another while reversing the order of bytes within the field. This
could be useful when transforming data from little-endian to big-endian.
Change-Id: Ifa1a911c0d3442f4a62f91f74ed25b196d01636b
Reviewed-on: https://go-review.googlesource.com/c/go/+/227478
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Remove some extra sanity-checking code from the loader's RelocVariant
method, since it was yielding a slowdown of 1-2% linking kubernetes
hyperkube (once again a reminder that relocation processing is a very
performance-sensitive part of the linker).
Change-Id: Ifbc0662f3f96c5f54131103ce6f7439ecfb9b9dc
Reviewed-on: https://go-review.googlesource.com/c/go/+/227477
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Add support to the loader for getting/setting the 'variant' property
of a symbol relocation. The variant property handles unusual or
infrequently used relocations that have both a type and a variant of
that type (this is needed for S390).
In the sym.Symbol world, a relocation variant is a field on the
'relocExt' extension that is part of sym.Reloc. In this new
implementation for the loader, reloc variants are stored in a side
table (a map) in the loader, and accessed via loader methods.
Change-Id: I62bf54ae7ff6d500c0ea8d2dbe759b2431087378
Reviewed-on: https://go-review.googlesource.com/c/go/+/227018
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Begin the job of converting the linker's "gentext" phase over to use
loader APIs. This patch includes most architectures except for s390x
and PPC (these will be added in subsequent patches, since they require
a couple of loader changes first).
Change-Id: Ic7f55c207dcdbbba657330ef007a72ff7c837416
Reviewed-on: https://go-review.googlesource.com/c/go/+/227017
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
2020-04-06 14:56:10 +00:00
1721 changed files with 128555 additions and 204501 deletions
you can check the <ahref="https://build.golang.org">Build Dashboard</a>.
Test failures may also be caught by the TryBots in code review.
</p>
<p>
Some repositories, like
<ahref="https://go.googlesource.com/vscode-go">golang.org/x/vscode-go</a> will
have different testing infrastructures, so always check the documentation
for the repository in which you are working. The README file in the root of the
repository will usually have this information.
</p>
<h3id="mail">Step 4: Send changes for review</h3>
<p>
@@ -720,10 +813,10 @@ when the change is applied.
</p>
<p>
If you are sending a change against a subrepository, you must use
If you are sending a change against a golang.org/x/... repository, you must use
the fully-qualified syntax supported by GitHub to make sure the change is
linked to the issue in the main repository, not the subrepository.
All issues are tracked in the main repository's issue tracker.
linked to the issue in the main repository, not the x/ repository.
Most issues are tracked in the main repository's issue tracker.
The correct form is "Fixes golang/go#159".
</p>
@@ -1070,25 +1163,6 @@ $ $GODIR/bin/go run run.go
</pre>
</ul>
<h3id="subrepos">Contributing to subrepositories (golang.org/x/...)</h3>
<p>
If you are contributing a change to a subrepository, obtain the
Go package using <code>go get</code>.
For example, to contribute
to <code>golang.org/x/oauth2</code>, check out the code by running:
</p>
<pre>
$ go get -d golang.org/x/oauth2/...
</pre>
<p>
Then, change your directory to the package's source directory
(<code>$GOPATH/src/golang.org/x/oauth2</code>), and follow the
normal contribution flow.
</p>
<h3id="cc">Specifying a reviewer / CCing others</h3>
@@ -1209,5 +1283,5 @@ $ git codereview mail HEAD
<p>
Make sure to explicitly specify <code>HEAD</code>, which is usually not required when sending
single changes.
single changes. More details can be found in the <ahref="https://pkg.go.dev/golang.org/x/review/git-codereview?tab=doc#hdr-Multiple_Commit_Work_Branches">git-codereview documentation</a>.
// The ddd argument does not live beyond the call it is created for.
// Allocate a temporary that will be cleaned up when this statement
// completes. We could be more aggressive and try to arrange for it
// to be cleaned up when the call completes.
prealloc[n]=o.newTemp(n.Type.Elem(),false)
}
caseODOTTYPE,ODOTTYPE2:
n.Left=o.expr(n.Left,nil)
if!isdirectiface(n.Type)||instrumenting{
@@ -1342,7 +1407,7 @@ func (o *Order) as2(n *Node) {
left:=[]*Node{}
forni,l:=rangen.List.Slice(){
if!l.isBlank(){
tmp:=o.newTemp(l.Type,types.Haspointers(l.Type))
tmp:=o.newTemp(l.Type,l.Type.HasPointers())
n.List.SetIndex(ni,tmp)
tmplist=append(tmplist,tmp)
left=append(left,l)
@@ -1364,7 +1429,7 @@ func (o *Order) okAs2(n *Node) {
vartmp1,tmp2*Node
if!n.List.First().isBlank(){
typ:=n.Right.Type
tmp1=o.newTemp(typ,types.Haspointers(typ))
tmp1=o.newTemp(typ,typ.HasPointers())
}
if!n.List.Second().isBlank(){
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
